Setup the data for detaching of the 'format' layer only when it's
present.
Restructure the logic to follow the same order as
qemuBlockStorageSourceAttachPrepareBlockdev in terms of
format/slice/storage -blockdev objects, and drop the now-misleading
comment for 'slice' of raw disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Restructure the code logic so that the function is prepared for the
possibility that the 'format' blockdev layer may be missing if not
needed.
To achieve this we need to introduce logic that selects which node
(format/slice/storage) becomes the effective node and thus formats the
correct set of arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the slice layer as effective layer once we stop formatting
the unnecessary 'raw' driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'format' layer is not required in certain cases. As the logic for
this will be a bit more involved create a helper function to do the
decision.
For now we'll keep to always format the 'format' -blockdev layer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a note stating that qemuBlockStorageSourceNeedsStorageSliceLayer
must be used only when setting up a new blockdev, any other case when
the device might been already set up must use the existence of the
nodename to do so.
Adjust qemuBlockStorageSourceAttachPrepareBlockdev to do so and refactor
qemuBlockStorageSourceDetachPrepare to use the same logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper retrieves the nodename of the slice layer if it's present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu allows and in some cases uses protocol driver names ('file',
'host_device', 'nbd', ...) in the 'backing file format' field of a qcow
to denote a image where the dummy 'raw' driver was not used on top.
Adapt our backing store parser for such cases. The examples added in
previous patch show the difference in behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU allows and in cases where you omit the not-strictly-needed 'raw'
driver on top of raw images automatically uses the protocol name inside
of the 'backing file format' field of the qcow2 image.
Libvirt expects only format names in that field.
Add example images showing this scenario, which will be fixed later.
The qcow2 image files in this commit were formatted as:
qemu-img create -f qcow2 -F nbd -b nbd+tcp://example.org:6000/blah -u qcow2-protocol-backing-nbd.qcow2 10M
and
qemu-img create -f qcow2 -F file -b raw qcow2-protocol-backing-file.qcow2
thus using 'nbd' and 'file' as backing format respectively.
(note that '-b raw' refers to the file in the example image folder)
To satisfy the test, note that the NBD image is also rejected as we
can't probe it, thus such configuration would not work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Compare also the detected format of the backing file
('backingStoreRawFormat' field) into the output data for comparison with
others. Since the ToString function can't convert VIR_STORAGE_FILE_AUTO
use also the numeric value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the return values by 0 because none of the callers care and some
of the backing store parser functions return this state also in cases
the rest of the code would consider as success.
Subsequently the parsers will be refactored and proper error reporting
returned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we consider the failure of parsing the backing store to be
actually success based on the value we return to the caller, we should
continue parsing also features and the 'compat' field so that we don't
have a partial definition if e.g. the backing store format is not known.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the backing store parser functions actually use it. Remove it to
avoid confusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In v9.9.0-104-gc472ce024b I've introduced another value to
virDomainAudioType enum. But I forgot to add corresponding case
into switch() in bhyveBuildSoundArgStr().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently translated at 88.4% (9215 of 10415 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/ru/
Co-authored-by: Jan Tomko <jtomko@redhat.com>
Co-authored-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Jan Tomko <jtomko@redhat.com>
This is mostly straightforward, except for a teensy-weensy
detail: usually, there's no system wide daemon running, no system
wide available socket that anybody could connect to. PipeWire
uses a per user daemon approach instead. But this in turn means,
that the socket location floats between various locations and is
derived from various environment variables (just like the actual
socket name) and thus we must pass the variables to QEMU.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/560
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU gained support for PipeWire audio backend (see QEMU commit
of v8.0.0-403-gc2d3d1c294). Its configuration knobs are basically
the same as pulseaudio's, except for PA's server name. Therefore,
a lot of code is copied over from pulseadio and fixed by
s/Pulse/Pipewire/ or s/pulseaudio/pipewire/.
There's one ley difference to PA though: pipewire daemon is
usually on per user basis (just like our qemu:///session).
Therefore, introduce this 'runtimeDir' attribute, which allows
specifying path to pipewire daemon socket (useful for
qemu:///system for instance).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On systems with humongous pages (16GiB) and 32bit int it's easy
to hit integer overflow in virNumaGetPages(). What happens is,
inside of virNumaGetPages() as we process hugepages for given
NUMA node (e.g. in order to produce capabilities XML), we keep a
sum of sizes of pools in an ULL variable (huge_page_sum). In each
iteration, the variable is incremented by 1024 * page_size *
page_avail. Now, page_size is just an uint, so we have:
ULL += U * U * ULL;
and because of associativity, U * U is computed first and since
we have two operands of the same type, no type expansion happens.
But this means, for humongous pages (like 16GiB) the
multiplication overflows.
Therefore, move the multiplication out of the loop. This helps in
two ways:
1) now we have ULL += U * ULL; which expands the uint in
multiplication,
2) it saves couple of CPU cycles.
Resolves: https://issues.redhat.com/browse/RHEL-16749
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If any of the images in a chain above a raw image have bitmaps, libvirt
would attempt to merge them when doing a block commit or block copy
operation, which would result into a error in the logs as creating
persistent bitmaps in a raw image is not supported.
Since libvirt cares only about persistent bitmaps we can simply skip the
operation if the target of a block copy or block commit is a raw image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The VM will require access also to the detected images. Unfortunately a
recent reordering of the code introduced a bug where the backing chain
was probed after setting up cgroups/selinux/namespaces, which caused
that any detected images were not allowed/added and qemu was then not
able to use them.
Fixes: 9b8bb536ff
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainMemoryDefCheckConflict() already does the same set
of checks. There's no need to duplicate them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since we're iterating over def->mems array, might as well check
for dimm slot duplicates.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far we check whether virtio-mem and/or virtio-pmem memory
devices do not overlap with each other. But we allow specifying
address where dimm and nvdimm memory devices are mapped too. And
there are left out from this collision check. Not anymore.
This leaves just sgx model out, but that's expected since it
can't have any address (see virDomainMemoryDefValidate()).
Resolves: https://issues.redhat.com/browse/RHEL-4452
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
At the end of virDomainMemoryDefValidate() there's a code that
checks whether two virtio-mem/virtio-pmem devices don't overlap.
Separate this code into its own function
(virDomainMemoryDefCheckConflict()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Differences from qemu:
* "vmx-ept-uc" (bit 8) and "vmx-ept-wb" (bit 14) are not added to
qemu's list of named features yet, but used in several qemu cpu
models never the less. Add to libvirt regardless.
* "vmx-invvpid-single-context" (bit 41) is erroneously called
"vmx-invept-single-context" in qemu. This is the name of the
feature associated with bit 25 in both libvirt and qemu.
* "vmx-invvpid-single-context-noglobals" (bit 43) is erroneously
called "vmx-invept-single-context-noglobals". Use the correct name.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Some guest OSes require cpu features from the vmx-* family,
e.g. vmx-xsaves. Up to now, libvirt ignored these features as they
were not required yet. qemu does not automatically enable e.g.
"vmx-xsaves" when requesting "xsaves":
qmp="qemu-kvm -machine accel=kvm -nodefaults -nographic -qmp stdio"
$(qmp) <<-EOF | jq | grep "xsaves"
{ "execute": "qmp_capabilities" }
{
"execute": "query-cpu-model-expansion",
"arguments": {
"type": "full",
"model": {
"name": "Skylake-Client-v1",
"props": { "xsaves": true } `# set to "true" or "false"`
}
}
}
{ "execute": "quit" }
EOF
with xsaves "false":
"xsaves": false,
"vmx-xsaves": false,
with xsaves "true":
"xsaves": true,
"vmx-xsaves": false,
Stop ignoring vmx-* features and begin adding them to libvirt's
database.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
While glibc provides qsort(), which usually is just a mergesort,
until sorting arrays so huge that temporary array used by
mergesort would not fit into physical memory (which in our case
is never), we are not guaranteed it'll use mergesort. The
advantage of mergesort is clear - it's stable. IOW, if we have an
array of values parsed from XML, qsort() it and produce some
output based on those values, we can then compare the output with
some expected output, line by line.
But with newer glibc this is all history. After [1], qsort() is
no longer mergesort but introsort instead, which is not stable.
This is suboptimal, because in some cases we want to preserve
order of equal items. For instance, in ebiptablesApplyNewRules(),
nwfilter rules are sorted by their priority. But if two rules
have the same priority, we want to keep them in the order they
appear in the XML. Since it's hard/needless work to identify
places where stable or unstable sorting is needed, let's just
play it safe and use stable sorting everywhere.
Fortunately, glib provides g_qsort_with_data() which indeed
implement mergesort and it's a drop in replacement for qsort(),
almost. It accepts fifth argument (pointer to opaque data), that
is passed to comparator function, which then accepts three
arguments.
We have to keep one occurance of qsort() though - in NSS module
which deliberately does not link with glib.
1: https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=03bf8357e8291857a435afcc3048e0b697b6cc04
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There's a new twalk() function that has a reentrant variant. Add
the former onto list of nonreentrant functions.
Also, refresh the comment on how to get the list, because it's
outdated a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that the spec file supports selectively disabling the native,
mingw32 and mingw64 parts, we can add coverage for the MinGW RPM
builds.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The new _without_native knob makes it possible to skip the native
build completely and build for MinGW only.
Best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
These replace the existing with_mingw but offer additional
granularity.
The existing _without_mingw knob retains its behavior of
disabling all MinGW builds at once for convenience, while the
newly introduced _without_mingw32/_without_mingw64 knobs make
it possible to disable only one of them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is functionally equivalent and will make future patches
nicer.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Move all dependencies that are needed both for native builds and
for MinGW ones near the top of the list. This will make future
patches nicer.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Originally the disk hotplug code didn't know how to attach a CD-ROM
drive, thus didn't have the necessary logic to handle empty cdroms.
Other disks can't be empty which is enforced by the parser validation
logic.
When support for hotplugging cdroms was added the code was not adjusted
to deal with empty drives thus attempted to setup the blockdev backend
for it.
Fixes: 3078799fef
Resolves: https://issues.redhat.com/browse/RHEL-16870
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit allowing hotplug of CDROMs moved the logic forbidding the hotplug
to the appropriate blocks based on the disk frontend but forgot to
actually bail out on such error.
Fixes: 3078799fef
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When I've originally refactored the function in commit 0d981bcefc
the logic was still correct, but then later in commit 52f8655439
I've moved most of the image setup logic into the function neglecting to
add the 'goto cleanup;' needed to skip over the setup of the disk
images.
Fixes: 52f8655439
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
