Commit 2737aaaf changed our policy for accepting new clients in a way, that
instead of accepting new clients only to disconnect them immediately, since
that would overcommit the limit, we temporarily disable polling for the
dedicated file descriptor, so any new connection will queue on the socket.
Commit 8b1f0469 then added the possibility to change the limits during runtime
but it didn't re-enable polling for the previously disabled file descriptor,
thus any new connection would still continue to queue on the socket. This patch
forces an update of the services each time the limits were changed in some way.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357776
Signed-off-by: Erik Skultety <eskultet@redhat.com>
So far, virNetServerCheckLimits was only used to possibly re-enable accepting
new clients that might have previously been disabled due to client limits
violation (max_clients, max_anonymous_clients). This patch refactors
virNetServerAddClient, which is currently the only place where the services get
disabled, in order to use the virNetServerCheckLimits helper instead of
checking the limits by itself.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since virNetServerAddClient checks for the limits in order to temporarily
suspend the services, thus not accepting any more clients, there is no reason
why virNetServerCheckLimits, which is only responsible for re-enabling
previously disabled services according to the limits, could not do both. To be
able to do that however, it needs to be moved up in the file since it's static
(and because it's just a helper and there's only one caller it should remain
static).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In case of error, libxlReconnectDomain may call
virDomainObjListRemoveLocked. However it has no local reference on
the domain object, leading to segfault. Get a reference to the domain
object at the start of the function and release it at the end to avoid
problems.
This commit also factorizes code between the error and normal ends.
To sync with virDomainControllerModelUSB, we add two models
in qemuControllerModelUSB 'qusb1' and 'qusb2', but those
models are not supported in qemu driver. So add check in
device post parse to report errors if 'qusb1' and 'qusb2'
are specified.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
libxl configuration files conversion can now handle USB controllers.
When parting libxl config file, USB controllers with type PV are
ignored as those aren't handled.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
When hotplugging a USB device, check if there is an available controller
and port, if not, automatically create a USB controller of version
2.0 and 8 ports.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Support USB controller hot-plug and hot-unplug.
#virsh attach-device dom usbctrl.xml
#virsh detach-device dom usbctrl.xml
usbctrl.xml example:
<controller type='usb' index='0' model='qusb2'>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
To support USB Controller in xen guest domains, just add
USB controller in domain config xml as following:
<controller type='usb' model='qusb2' ports='4'/>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
According to libxl implementation, it supports pvusb
controller of version 1.1 and version 2.0, and it
supports two types of backend, 'pvusb' (dom0 backend)
and 'qusb' (qemu backend). But currently pvusb backend
is not checked in yet.
To match libxl support, extend usb controller schema
to support two more models: qusb1 (qusb, version 1.1)
and 'qusb2' (qusb version 2.0).
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Let's cleanly differentiate what wiping a volume does for ploop and
other volumes so it's more readable what is done for each one instead of
branching out multiple times in different parts of the same function.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some functions use volume specification merely to use the target path
from it. Let's change it to pass the path only so that it can be used
for other files than just volumes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is done in order to call them in next patches from each other and
definitions would be missing otherwise.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When reset was called from a domain that crashed we didn't change the
crashed state into a paused one which could confuse users.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1269575
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 0c56d94318 forgot to return false in the cmdConnect command
after the clean up made there.
Before (assuming you don't have uri alias for 'asdf'):
$ virsh connect asdf
error: failed to connect to the hypervisor
$ echo $?
0
After (with the same assumption):
$ virsh connect asdf
error: failed to connect to the hypervisor
error: no connection driver available for asdf
$ echo $?
1
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356461
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Until now we simply errored out when the translation from pool+volume
failed. However, we should instead check whether that disk is needed or
not since there is an option for that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1168453
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is an error reset following the function and check for
startupPolicy before that. Let's reflect those things inside that
function so that future code doesn't have to be that complex.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Once the SASL authentication process has successfully passed, we should also
save the SASL username used to client's identity, so that when a client like
virt-admin tries to obtain it, the server will actually format the username to
the response data.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When commit 4a0e9108 added a support for client information retrieval, it made
the API return SASL identity info only for clients connected remotely, yet SASL
can be happily used with UNIX sockets as well.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When wiping a volume we just rewrite all the data of the volume, not
only the content. Since format gets overridden, we need to recreate the
volume. However we can't do that for every possible format out there.
Since it was only coded for the ploop volume type, let's document what
might be the consequences instead of forbidding it for every other
format out there.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=868771
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The panic devices with models s390 and pseries are autogenerated.
For backwards compatibility reasons the devices are to be removed
when migrating.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The only function that we currently use from glib is g_sprintf().
That's a very big gun for such small target. Not only that, but
we've silently relied on wireshark dragging in the glib. Replace
the g_sprintf() with plain sprinf() so that we can drop the glib
dependency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch reflects cases when <interface> element and its <source>
subelement for network type are formated based on actual type resolved
from referenced network instead of original one. networkAllocateActualDevice
and virDomainActualNetDefContentsFormat are taken as reference.
Ever since virDomainCreateWithFlags() was introduced by de3aadaa
[drivers: add virDomainCreateWithFlags if virDomainCreate exists], the
domain ID retrieved with virDomainGetID() was incorrect for several
drivers after virDomainCreateWithFlags() was called. The API consumer
had to look up the domain anew to retrieve the correct ID.
For the ESX driver, this was fixed in 6139b274 [esx: Update ID after
starting a domain]. For the openvz driver, it was fixed in fd81a097
[openvzDomainCreateWithFlags: set domain id to the correct value]. The
test driver, the OpenNebula driver (removed in the meantime) and the
vbox driver were already updating the domain ID correctly in
domainCreate().
Copy over the ID in qemuDomainCreateWithFlags() to fix this for the qemu
driver, too.
Fixes: de3aadaa ("drivers: add virDomainCreateWithFlags if virDomainCreate exists")
Reported-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
==2064442== 200 (88 direct, 112 indirect) bytes in 1 blocks are definitely lost in loss record 54 of 73
==2064442== at 0x4C2E0F0: calloc (vg_replace_malloc.c:711)
==2064442== by 0x18E75B80: virAllocVar (viralloc.c:560)
==2064442== by 0x18EC43B0: virObjectNew (virobject.c:193)
==2064442== by 0x18EC476E: virObjectLockableNew (virobject.c:219)
==2064442== by 0x1906BC73: virSecurityManagerNewDriver (security_manager.c:93)
==2064442== by 0x1906C076: virSecurityManagerNewStack (security_manager.c:115)
==2064442== by 0x43CC39: qemuTestDriverInit (testutilsqemu.c:548)
==2064442== by 0x4337ED: mymain (qemumonitorjsontest.c:2440)
==2064442== by 0x43BABE: virTestMain (testutils.c:982)
==2064442== by 0x43A490: main (qemumonitorjsontest.c:2558)
Consider the following XML snippet:
<memory model=''>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
</memory>
Whats wrong you ask? The @model attribute. This should result in
an error thrown into users faces during virDomainDefine phase.
Except it doesn't. The XML validation catches this error, but if
users chose to ignore that, they will end up with invalid XML.
Well, they won't be able to start the machine - that's when error
is produced currently. But it would be nice if we could catch the
error like this earlier.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The original name 'admin_uri_default' was introduced to our code by commit
dbecb87f. However, at that time we already had a separate config file for
admin library but the commit mentioned above didn't properly adjust the
config's option name. The result is that when we're loading the config, we
check a non-existent config option (there's not much to do with the URIs
anyway, since we only allow local connection). Additionally, virt-admin's man
page documents, that the default URI can be altered by setting
admin_uri_default option. So the fix proposed by this patch leaves the
libvirt-admin.conf as is and adjusts the naming in the code as well as in the
virt-admin's man page.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In wireshark commit bbdd89b9 (contained in 2.1.0 release) they
have changed prototype of dissector function. Now it returns
number of bytes consumed by the dissector, and can get a pointer
to user specified data (which we don't use).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356436
Commit id '56057900' altered the discovery of iSCSI node targets by
using the "--op nonpersistent". This caused issues for clean environments
or if by chance a "-m node -o delete" was executed.
Since each iSCSI Storage Pool has the required iSCSI target path, use
that and the virISCSINodeNew API in order to generate the iSCSI node record.
https://bugzilla.redhat.com/show_bug.cgi?id=1356436
According to RFC 3721 (https://www.ietf.org/rfc/rfc3721.txt), there are
two ways to "discover" targets in/for the iSCSI environment. Discovery
is the process which allows the initiator to find the targets to which
it has access and at least one address at which each target may be
accessed.
The method currently implemented in libvirt using the virISCSIScanTargets
API is known as "SendTargets" discovery. This method is more useful when
the target IP Address and TCP port information are available, e.g. in
libvirt terms the "portal". It returns a list of targets for the portal.
From that list, the target can be found. This operation can also fill an
iSCSI node table into which iSCSI logins may occur. Commit id '56057900'
altered that filling by adding the "--op nonpersistent" since it was
not necessarily desired to perform that for non libvirt related targets.
The second method is "Static Configuration". This method not only needs
the IP Address and TCP port (e.g. portal), but also the iSCSI target name.
In libvirt terms this would be the device path field from the iSCSI pool
<source> XML. This patch implements the second methodology using that
required device path as the targetname.
Since commit 834c5720 which extracted the generic functionality out of virsh
and made it available for other clients like virt-admin to make use of it, it
also introduced a bug when it renamed the original VIRSH_ environment variables
to VSH_ variables. Virt-admin of course suffers from the same bug, so this
patch modifies the generic module vsh.c to construct the correct name for
environment variables of each client from information it has.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357363
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Well, the reason behind this change is that if the function is extended in some
way that e.g. would involve allocation we do not have a way of telling it to
the caller. More specifically, vshInitDebug only relies on some hardcoded
environment variables (by a mistake) that aren't documented anywhere so neither
virsh's nor virt-admin's documented environment variables take effect. One
possible solution would be duplicate the code for each CLI client or leave the
method be generic and provide means that it could figure out, which client
called it, thus initializing the proper environment variables but that could
involve operations that might as well fail in certain circumstances and the
caller should know that an error occurred.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
My compiler identified some variables that were set, but never
actually used. For instance, opts_required, and data_acomplete.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
