Commit Graph

297 Commits

Author SHA1 Message Date
Michal Privoznik
72aafe9c81 Migration: Introduce VIR_MIGRATE_PARAM_LISTEN_ADDRESS
The parameter allows overriding default listen address for '-incoming'
cmd line argument on destination.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-11 10:51:36 +02:00
Ján Tomko
bc3070c719 Fix handling of IPv6 listen addresses in cmdDomDisplay
Use virSocketAddrIsWildcard instead of STREQ to check for the ANY
address and put brackets around the address if it contains ':'.
2013-10-01 14:45:20 +02:00
Hongwei Bi
7db19ff9ab virsh-domain: Free dom before return false in cmdDump 2013-09-30 14:54:30 +02:00
Christophe Fergeau
9976c4b9a6 virsh: Fix domdisplay when domain only uses TLS
It's possible to create a domain which will only use a TLS port
and will not have a non-TLS port set by using:
<graphics type='spice' autoport='yes' defaultMode='secure'/>
In such a setup, the 'graphics' node for the running domain will be:
<graphics type='spice' tlsPort='5900'
          autoport='yes' listen='127.0.0.1'
          defaultMode='secure'>

However, cmdDomDisplay loops over all the 'graphics' node, and it
ignores nodes which don't have a 'port' attribute. This means
'virsh domdisplay' will only return an empty string for domains
as the one above.

This commit looks for both 'port' and 'tlsPort' before deciding
to ignore a graphics node. It also makes sure 'port' is not printed
when it's not set.
This makes 'virsh domdisplay' return
'spice://127.0.0.1?tls-port=5900' for domains using only a TLS
port.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
2013-09-27 17:40:11 +02:00
Hongwei Bi
b80fff1444 virsh-domain: Add a missing check and fix leak in cmdScreenshot
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-25 09:34:24 -06:00
Simone Gotti
fe64499dd1 virsh: add missing "async" option in opts_block_commit
After commit 8aecd35126 it'll detect
that a required option is not defined and it will assert and exit with:

virsh.c:1364: vshCommandOpt: Assertion `valid->name' failed.

Problem has been latent since commit ed23b106.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-19 12:14:03 -06:00
Peter Krempa
6bf4c77984 virsh: Don't shadow global variable "remove" in cmdMetadata
Some systems apparently have a global variable/function called remove
and thus break compilation of virsh-domain.c. Rename the variable to
avoid this.

Reported by GuanQiang.
2013-09-17 13:57:32 +02:00
Peter Krempa
01b03f59e7 virsh-domain: Add command to allow modifications of XML metadata
The metadata modification functions will support modification of the XML
metadata. Add a virsh command to allow using this approach.
2013-09-17 09:42:49 +02:00
Peter Krempa
3df33d7ad5 virsh-domain: use virXMLNodeToString instead of xmlNodeDump 2013-09-17 09:42:49 +02:00
Peter Krempa
cb356928a6 virsh-domain: Line up signal names array
Line up the array so that the grid is visible.
2013-09-17 09:42:49 +02:00
Peter Krempa
626d4dfc2e virsh-domain: Remove spurious ATTRIBUTE_UNUSED from cmdDesc
The "cmd" variable is actually used so remove the attribute.
2013-09-17 09:42:49 +02:00
yangdongsheng
6c038ee330 virsh: move command maxvcpus from domain group to host group.
Since the maxvcpus command query the maximum number of virtual
CPUs supported for a guest VM on this connection, it should be
in virsh-host.c but not virsh-domain.c.

Signed-off-by: yangdongsheng <yangds.fnst@cn.fujitsu.com>
2013-09-15 22:39:41 -05:00
Jiri Denemark
f084caae7c virsh domjobinfo: Do not return 1 if job is NONE
https://bugzilla.redhat.com/show_bug.cgi?id=1006864

Commit 38ab1225 changed the default value of ret from true to false but
forgot to set ret = true when job is NONE. Thus, virsh domjobinfo
returned 1 when there was no job running for a domain but it used to
(and should) return 0 in this case.
2013-09-12 11:31:49 +02:00
Daniel P. Berrange
bbcdd9b5dc Stop free'ing 'const char *' strings
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-09-05 11:28:01 +01:00
Peter Krempa
02eaf1821c virsh: Rename vshMakeStdinRaw to vshTTYMakeRaw and move it to virsh.c
Move the function to virsh.c to the rest of the TTY managing functions
and change the code so that it mirrors the rest.
2013-09-03 14:06:11 +02:00
Peter Krempa
40f1d18fea tools: rename console.[ch] to virsh-console.[ch] and fix coding style 2013-09-03 14:06:11 +02:00
Peter Krempa
b46c4787dd virsh-domain: Avoid killing ssh transport tunnels when cancelling job
The vshWatchJob function registers a SIGINT handler that is used to
abort the active job and does not terminate virsh. Unfortunately, this
breaks when using the ssh transport as SIGINT is sent to the foreground
process group including the ssh transport processes which terminate.
This breaks the connection and migration is left in a insane state.

With this patch the terminal is modified to ignore key binding that
sends SIGINT and does the handling manually.

Resoves: https://bugzilla.redhat.com/show_bug.cgi?id=983348
2013-09-03 09:55:27 +02:00
Hongwei Bi
461b1c8b7b Fix memory leak in cmdAttachDisk
When virBufferError is ok in cmdAttachDisk, the latter
should 'goto cleanup', instead of returning a false to
prevent memory leaking.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-31 15:50:23 -06:00
Peter Krempa
8c725cc10d virsh-domain: rename print_job_progress to vshPrintJobProgress 2013-08-30 09:38:51 +02:00
Guannan Ren
9eb444364e virsh: fix return value error of cpu-stats
virsh cpu-stats guest --start 0 --count 3
It outputs right but the return value is 1 rather than 0
echo $?
1

Found by running libvirt-autotest
./run -t libvirt --tests virsh_cpu_stats
2013-08-27 15:17:03 +08:00
Tomas Meszaros
a88924bc21 virsh: C99 style for info_domfstrim and opts_lxc_enter_namespace
Change info_domfstrim and opts_lxc_enter_namespace initialization style
to C99.
2013-08-26 10:23:16 -06:00
Peter Krempa
04898f60d2 virsh: Don't leak list of volumes when undefining domain with storage
Use the new semantics of vshStringToArray to avoid leaking the array of
volumes to be deleted. The array would be leaked in case the first
volume was found in the domain definition. Also refactor the code a bit
to sanitize naming of variables hoding arrays and dimensions of the
arrays.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=996050
2013-08-20 17:55:08 +02:00
Don Dugger
d4952d36d0 Add flag to BaselineCPU API to return detailed CPU features
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model.  This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.

Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-16 15:31:18 -06:00
Peter Krempa
f4ec861641 virsh-domain: Fix memleak in cmdCPUBaseline
https://bugzilla.redhat.com/show_bug.cgi?id=997765

==1349431== 8 bytes in 1 blocks are definitely lost in loss record 11 of 760
==1349431==    at 0x4C2A554: calloc (vg_replace_malloc.c:593)
==1349431==    by 0x4E9AA3E: virAllocN (in /usr/lib64/libvirt.so.0.1001.1)
==1349431==    by 0x4EF28C4: virXPathNodeSet (in /usr/lib64/libvirt.so.0.1001.1)
==1349431==    by 0x130B83: cmdCPUBaseline (in /usr/bin/virsh)
==1349431==    by 0x12C608: vshCommandRun (in /usr/bin/virsh)
==1349431==    by 0x12889A: main (in /usr/bin/virsh)
2013-08-16 10:37:39 +02:00
Peter Krempa
5075248ac9 virsh-domain: Fix memleak in cmdUndefine with storage
When undefining a domain with storage when the volume isn't managed by
libvirt the name and path strings weren't freed properly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=996050
2013-08-15 16:47:49 +02:00
Peter Krempa
3abb6ec077 virsh-domain: Flip logic in cmdSetvcpus
To avoid having to assign a failure code to the returned variable switch
this function to negative logic. This will fix issue with invalid number
of cpus returning success return code.

https://bugzilla.redhat.com/show_bug.cgi?id=996466
2013-08-13 11:14:56 +02:00
Eric Blake
4c29772845 virsh: nicer abort of blockcopy
I attempted 'virsh blockcopy $dom vda $path --wait --verbose', then
hit Ctrl-C; I was a bit surprised to see this error message:

Block Copy: [  3 %]error: failed to query job for disk vda

when I had been expecting:

Block Copy: [  3 %]
Copy aborted

* tools/virsh-domain.c (cmdBlockCopy): Print graceful exit message
rather than error when ctrl-c interrupts job.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 11:04:11 -06:00
Guannan Ren
7729a16814 virsh: fix change-media bug on disk block type
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=923053
When cdrom is block type, the virsh change-media failed to insert
source info because virsh uses "<source block='/dev/sdb'/>" while
the correct name of the attribute for block disks is "dev".
2013-07-23 14:20:56 +08:00
Daniel P. Berrange
afb50d79db Enable FD passing when starting guests with virsh
Add a "--pass-fds N,M,..." arg to the virsh start/create
methods. This allows pre-opened file descriptors from the
shell to be passed on into the guest

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-18 12:07:53 +01:00
Daniel P. Berrange
111f6f4d73 Convert 'int i' to 'size_t i' in tools/ files
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-10 17:40:13 +01:00
Michal Privoznik
76fad65bdc Adapt to VIR_ALLOC and virAsprintf in tools/* 2013-07-10 11:07:33 +02:00
Jiri Denemark
4669543cb8 Introduce VIR_MIGRATE_PARAM_GRAPHICS_URI parameter
The parameter specifies connection parameters to use for migrating
client's connection to domain's graphical console.
2013-06-25 01:33:47 +02:00
Jiri Denemark
bdb6578a42 virsh: Use extensible migration APIs 2013-06-25 01:31:07 +02:00
Peter Krempa
cf6d56ac43 migration: Make erroring out on I/O error controllable by flag
Paolo Bonzini pointed out that it's actually possible to migrate a qemu
instance that was paused due to I/O error and it will be able to work on
the destination if the storage is accessible.

This patch introduces flag VIR_MIGRATE_ABORT_ON_ERROR that cancels the
migration in case an I/O error happens while it's being performed and
allows migration without this flag. This flag can be possibly used for
other error reasons that may be introduced in the future.
2013-06-18 14:52:26 +02:00
Peter Krempa
c2093b2aba Fix commit 29c1e913e4
This patch fixes changes done in commit 29c1e913e4
that was pushed without implementing review feedback.

The flag introduced by the patch is changed to VIR_DOMAIN_VCPU_GUEST and
documentation makes the difference between regular hotplug and this new
functionality more explicit.

The virsh options that enable the use of the new flag are changed to
"--guest" and the documentation is fixed too.
2013-06-10 09:52:49 +02:00
Peter Krempa
29c1e913e4 API: Introduce VIR_DOMAIN_VCPU_AGENT, for agent based CPU hot(un)plug
This flag will allow to use qemu guest agent commands to disable
(offline) and enable (online) processors in a live guest that has the
guest agent running.
2013-06-07 15:58:25 +02:00
Osier Yang
232240d095 virsh: Allow attach-disk to specify disk wwn
Commit 6e73850b01 support to set wwn for disks, but it was not
exposed to attach-disk.
2013-06-04 19:56:07 +08:00
Peter Krempa
08f1c0a9ae virsh-domain: Report errors and don't deref NULL in qemu-agent-command
Check the returned value for NULL and take the cleanup path
appropriately if the API fails.
2013-06-03 17:25:26 +02:00
Peter Krempa
33e300229c virsh-domain: Add --live, --config, --current logic to cmdAttachInterface
Use the approach established in commit
69ce3ffa8d to improve this function too.
2013-06-03 14:23:02 +02:00
Peter Krempa
37772499e0 virsh-domain: Add --live, --config, --current logic to cmdAttachDisk
Use the approach established in commit
69ce3ffa8d to improve this function too.
2013-06-03 14:23:02 +02:00
Peter Krempa
f81c95b31f virsh-domain: Add --live, --config, --current logic to cmdAttachDevice
Use the approach established in commit
69ce3ffa8d to improve this function too.
2013-06-03 14:23:01 +02:00
Cole Robinson
5e1de4fcdd virsh: migrate: Don't disallow --p2p and --migrateuri
Because it's a valid combination. p2p still uses a separate channel
for qemu migration, so there's value in letting the user specify a manual
migrate URI for overriding auto-port, or libvirt's FQDN lookup.

What _isn't_ allowed is --migrateuri and TUNNELLED, since there is
no separate migration channel. Disallow that instead
2013-05-29 12:31:00 -04:00
Eric Blake
146ba114a5 syntax: prefer space after semicolon in for loop
I noticed several unusual spacings in for loops, and decided to
fix them up.  See the next commit for the syntax check that found
all of these.

* examples/domsuspend/suspend.c (main): Fix spacing.
* python/libvirt-override.c: Likewise.
* src/conf/interface_conf.c: Likewise.
* src/security/virt-aa-helper.c: Likewise.
* src/util/virconf.c: Likewise.
* src/util/virhook.c: Likewise.
* src/util/virlog.c: Likewise.
* src/util/virsocketaddr.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/viruuid.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* tools/virsh-domain-monitor.c (vshDomainStateToString): Drop
default case, to let compiler check us.
* tools/virsh-domain.c (vshDomainVcpuStateToString): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-28 07:56:07 -06:00
Martin Kletzander
0a24028f11 virsh: Fix virDomainFree for NULL domain in blkdeviotune 2013-05-23 13:02:19 +02:00
Osier Yang
c96f6ae845 tools: Remove the whitespace before ";" 2013-05-21 23:41:45 +08:00
Osier Yang
b77737372d virsh: Pretty the output of qemu-agent-command
This adds a new option "--pretty" for qemu-agent-command, to
pretty-format the returned JSON string.
2013-05-15 01:02:25 +08:00
Osier Yang
8b9eb14a6d virsh: Use vshPrint instead of printf 2013-05-15 01:02:18 +08:00
Ján Tomko
dcea5a492f get rid of virBufferAsprintf where possible
Use virBufferAddLit or virBufferAddChar instead.
2013-05-07 17:38:58 +02:00
Michal Privoznik
7c9a2d88cd virutil: Move string related functions to virstring.c
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
2013-05-02 16:56:55 +02:00
Peter Krempa
642261a866 virsh-domain: Refactor cmdVcpucount and fix output on inactive domains
This patch factors out the vCPU count retrieval including fallback means
into vshCPUCountCollect() and removes the duplicated code to retrieve
individual counts.

The --current flag (this flag is assumed by default) now works also with
--maximum or --active without the need to explicitly specify the state
of the domain that is requested.

This patch also fixes the output of "virsh vcpucount domain" on inactive
domains:

Before:
$ virsh vcpucount domain
maximum      config         4
error: Requested operation is not valid: domain is not running
current      config         4
error: Requested operation is not valid: domain is not running

After:
$virsh vcpucount domain
maximum      config         4
current      config         4

.. and for transient domains too:

Before:
$ virsh vcpucount transient-domain
error: Requested operation is not valid: cannot change persistent config of a transient domain
maximum      live           3
error: Requested operation is not valid: cannot change persistent config of a transient domain
current      live           1

After:
$ virsh vcpucount transient-domain
maximum      live           3
current      live           1
2013-04-19 14:02:10 +02:00
Peter Krempa
f78266dfc2 virsh-domain: Report errors on invalid --holdtime value for cmdSendKey
Using of a incorrect value for the --holdtime option was silently
ignored and 0 was used. In case a negative number was used, it
overflowed as the API expects a unsigned int.

Fix the data type and getter function type and report errors on
incorrect values.
2013-04-18 15:23:09 +02:00
Peter Krempa
35d0f3b14a virsh-domain: Clean up cmdSendKey
Rename the get_integer_keycode helper to vshKeyCodeGetInt and get rid of
a unneeded typecast.
2013-04-18 15:23:09 +02:00
John Ferlan
6528b7044f Add error handling to optional arguments in cmdCPUStats 2013-04-11 18:53:35 -04:00
John Ferlan
ad86ebb286 Remove extraneous comma in info_cpu_stats and opts_cpu_stats 2013-04-11 18:40:59 -04:00
Michal Privoznik
0aa8397c62 virsh: Update list of shutdown/reboot modes
As of 76d9f65644 we are supporting two new modes: initctl and signal.
However, these are missing in help listing.
2013-04-11 13:03:55 +02:00
Martin Kletzander
e7cd2844ca Allow multiple parameters for schedinfo
virsh schedinfo was able to set only one parameter at a time (not
counting the deprecated options), but it is useful to set more at
once, so this patch adds the possibility to do stuff like this:

virsh schedinfo <domain> cpu_shares=0 vcpu_period=0 vcpu_quota=0 \
emulator_period=0 emulator_quota=0

Invalid scheduler options are reported as well.  These were previously
reported only if the command hadn't updated any values (when
cmdSchedInfoUpdate returned 0).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=810078
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919372
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919375
2013-04-03 08:49:30 +02:00
Michal Privoznik
deb86ee912 virsh: Call virDomainFree in cmdDomFSTrim
https://bugzilla.redhat.com/show_bug.cgi?id=928197

The virsh domfstrim command was not freeing allocated domain,
leaving leaked references behind.
2013-04-02 17:36:06 +02:00
Peter Krempa
b685a73ed9 virsh-domain: Add --live, --config, --current logic to cmdDetachDisk
Use the established approach to improve this function too.
2013-04-02 16:18:38 +02:00
Peter Krempa
d87f721073 virsh-domain: Add --live, --config, --current logic to cmdDetachDevice
Use the established approach to improve this function too.
2013-04-02 16:18:32 +02:00
Peter Krempa
c3d9f399b5 virsh-domain: Add --live, --config, --current logic to cmdDetachInterface
Use the established approach to improve this function too.
2013-04-02 16:18:05 +02:00
Peter Krempa
69ce3ffa8d virsh: Fix semantics of --config for "update-device" command
The man page states that with --config the next boot is affected. This
can be understood as if _only_ the next boot was affected. This isn't
true if the machine is running.

This patch adds the full --live, --config, --current infrastructure and
tweaks stuff to correctly support the obsolete --persistent flag.

Note that this patch changes the the behavior of the --config flag to match the
use of this flag in rest of libvirt. This flag was mistakenly renamed from
--persistent that originaly had different semantics.
2013-04-02 16:14:14 +02:00
Peter Krempa
cc0cc6b714 virsh-domain: Fix declarations of flag variables in cmdChangeMedia
The parameter options can be declared directly.

Also use macros for mutual exclusion on some of the incompatible
parameter variables.
2013-04-02 16:02:43 +02:00
Peter Krempa
803e467080 virsh-domain: Simplify usage of --current, --live and --config flags
This patch uses the new helper to avoid the more complex check for
domain state modification flags.
2013-04-02 16:02:43 +02:00
Osier Yang
8893df388e virsh: Add a helper to parse cpulist
The 'virsh vcpupin' and 'virsh emulatorpin' commands use the same
code to parse the cpulist. This patch abstracts the same code as
a helper. Along with various code style fixes, and error improvement
(only error "Physical CPU %d doesn't exist" if the specified CPU
exceed the range, no "cpulist: Invalid format", see the following
for an example of the error prior to this patch).

% virsh vcpupin 4 0 0-8
error: Physical CPU 4 doesn't exist.
error: cpulist: Invalid format.
2013-04-02 12:37:24 +08:00
Yanbing Du
4faf435cbd virsh: Correct DESCRIPTION for virsh help blockcopy
Signed-off-by: Yanbing Du <ydu@redhat.com>
2013-03-26 20:23:30 +01:00
Ján Tomko
41db895f9e virsh: error out on non-numeric timeout values
Some block commands and migrate ignored incorrect values.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=927495
2013-03-26 17:28:36 +01:00
Yanbing Du
5c925a4d82 Remove the redundant parentheses in migrate help
Signed-off-by: Yanbing Du <ydu@redhat.com>
2013-03-26 11:32:36 +08:00
Peter Krempa
020e210387 virsh-domain: Fix flag name in error message to match the check
The check is done on the "--paused" flag but the error message stated
"--saved"
2013-03-21 12:32:03 +01:00
Martin Kletzander
73cc87d161 Cleanup useless flags specifications
After we switched to C99 initialization, I noticed there were many
places where the specification of .flags parameter differed.  After
going through many options and deciding whether to unify the
initialization to be '.flags = 0' or '.flags = VSH_OFLAG_NONE', I
realized both can be removed and it makes the code easier to go
through.
2013-03-15 15:05:45 +01:00
Yanbing Du
8bf8a89ac1 Fix a copy & paste error for virsh dump help
Signed-off-by: Yanbing Du <ydu@redhat.com>
2013-03-15 16:22:49 +08:00
Daniel P. Berrange
e4e69e899e Apply security label when entering LXC namespaces
Add a new virDomainLxcEnterSecurityLabel() function as a
counterpart to virDomainLxcEnterNamespaces(), which can
change the current calling process to have a new security
context. This call runs client side, not in libvirtd
so we can't use the security driver infrastructure.

When entering a namespace, the process spawned from virsh
will default to running with the security label of virsh.
The actual desired behaviour is to run with the security
label of the container most of the time. So this changes
virsh lxc-enter-namespace command to invoke the
virDomainLxcEnterSecurityLabel method.

The current behaviour is:

LABEL                             PID TTY          TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 29 ? 00:00:00 dhclient
staff_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 47 ? 00:00:00 ps

Note the ps command is running as unconfined_t,  After this patch,

The new behaviour is this:

virsh -c lxc:/// lxc-enter-namespace dan -- /bin/ps -eZ
LABEL                             PID TTY          TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 32 ? 00:00:00 dhclient
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 38 ? 00:00:00 ps

The '--noseclabel' flag can be used to skip security labelling.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-13 15:16:37 +00:00
Peter Krempa
38cc07b7bc virsh-domain: Remove unused vshCompleteXMLFromDomain
The function is marked as unused and breaks compilation on RHEL4. Remove
it from the tree until a new use case can be found.
2013-03-10 10:18:23 +01:00
Peter Krempa
406dc47757 Revert "Ensure xmlSaveToBuffer is always defined"
The commit originally fixed code that isn't being used. Revert
it and remove the unused code as a real fix.

This reverts commit a66b32d929.
2013-03-10 10:18:23 +01:00
Daniel P. Berrange
a66b32d929 Ensure xmlSaveToBuffer is always defined
RHEL4 vintage libxml2 header files are missing xmlSaveToBuffer
despite the symbol existing in the binary

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-07 18:10:35 +00:00
Jiri Denemark
e94aeb1428 virsh: Add migrate-compcache command
This is a command wrapping virDomainMigrateGetCompressionCache and
virDomainMigrateSetCompressionCache.
2013-02-22 17:35:59 +01:00
Jiri Denemark
38ab12251e virsh: Use virDomainGetJobStats in domjobinfo if available 2013-02-22 17:35:58 +01:00
Jiri Denemark
ecfff1dab3 Introduce VIR_MIGRATE_COMPRESSED flag
This flag may be used with migration APIs to request compression of
migration data.
2013-02-22 17:35:58 +01:00
Michal Privoznik
38d52f6318 virsh-domain.c: Switch to c99 initialization of vshCmdInfo 2013-02-12 17:50:21 +01:00
Michal Privoznik
df5fd11f86 virsh: Switch to c99 initialization of vshCmdDef 2013-02-12 17:50:21 +01:00
Peter Krempa
fa956d9055 virsh-domain: Update domain commands to use vshCommandOptStringReq 2013-02-04 14:17:44 +01:00
John Ferlan
46b1d8cf7a Enforce return check on virAsprintf() calls
Way back when I started making changes for Coverity messages my first set
were to a bunch of CHECKED_RETURN errors.  In particular virAsprintf() had
a few callers that Coverity noted didn't check their return (although some
did check if the buffer being printed to was NULL or not).

It was suggested at the time as a further patch an ATTRIBUTE_RETURN_CHECK
should be added to virAsprintf(), see:

https://www.redhat.com/archives/libvir-list/2013-January/msg00120.html

This patch does that and fixes a few more instances not found by Coverity
that failed the check.
2013-01-30 14:42:22 -07:00
Peter Krempa
f8d5119e4f virsh: Add --print-xml flag for attach-disk command
The flag causes the XML of the disk that would be attached to be printed
instead.
2013-01-25 20:53:37 +01:00
Peter Krempa
a54f25a946 virsh-domain: Refactor error paths for cmdCPUStats
This patch fixes the following issues in the cpu-stats virsh command:

1) Renames label failed_params to no_memory to match coding style
2) Uses proper typed parameter cleanup in error paths to avoid leaks
3) Adds a ret variable and simplifies error labels
4) Changes error message to a slightly more descriptive one and gets rid
   of the newline at the end:

Before:
$ virsh cpu-stats tr
error: Failed to virDomainGetCPUStats()

error: Requested operation is not valid: domain is not running

After:
$ tools/virsh cpu-stats tr
error: Failed to retrieve CPU statistics for domain 'tr'
error: Requested operation is not valid: domain is not running
2013-01-22 17:36:45 +01:00
Jiri Denemark
de78bf604c Introduce virTypedParamsClear public API
The function is just a renamed public version of former
virTypedParameterArrayClear.
2013-01-18 15:04:00 +01:00
Jiri Denemark
f52e9f1f4d virsh: Use virTypedParams* APIs in cpu-stats 2013-01-18 15:04:00 +01:00
Jiri Denemark
ec3e50644e virsh: Use virTypedParams* APIs in numatune 2013-01-18 15:04:00 +01:00
Jiri Denemark
7786233009 virsh: Use virTypedParams* APIs in memtune 2013-01-18 15:03:59 +01:00
Jiri Denemark
e982dacb45 virsh: Use virTypedParams* APIs in schedinfo 2013-01-18 15:03:59 +01:00
Jiri Denemark
9b2d2446af virsh: Use virTypedParams* APIs in domiftune 2013-01-18 15:03:59 +01:00
Jiri Denemark
39e5173a3d virsh: Use virTypedParams* APIs in blkiotune 2013-01-18 15:03:59 +01:00
Jiri Denemark
a8fca0da06 virsh: Use virTypedParams* APIs in blkdeviotune 2013-01-18 15:03:59 +01:00
Michal Privoznik
99419bd11e virsh-domain.c: Switch to C99 initialization of vshCmdOptDef 2013-01-17 13:58:52 +01:00
Daniel P. Berrange
e397f658b0 Add 'lxc-enter-namespace' command to virsh
Add a 'lxc-enter-namespace' command which accepts a domain name
and then a command + args to run, attached to the container

eg

  virsh -c lxc:/// lxc-enter-namespace demo -- /bin/ps -auxf

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-15 19:09:47 +00:00
Daniel P. Berrange
24bcd8d45a Move qemu-XXX commands from virsh-host.c to virsh-domain.c
The QEMU specific APIs all operate on domains, not the host,
so should be in the virsh-domain.c file / group

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-08 08:56:49 +00:00
Daniel P. Berrange
f24404a324 Rename virterror.c virterror_internal.h to virerror.{c,h} 2012-12-21 11:19:50 +00:00
Daniel P. Berrange
556cf5f617 Rename xml.{c,h} to virxml.{c,h} 2012-12-21 11:19:50 +00:00
Daniel P. Berrange
44f6ae27fe Rename util.{c,h} to virutil.{c,h} 2012-12-21 11:19:49 +00:00
Daniel P. Berrange
ab9b7ec2f6 Rename memory.{c,h} to viralloc.{c,h} 2012-12-21 11:17:14 +00:00
Daniel P. Berrange
2005f7b552 Rename buf.{c,h} to virbuffer.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-21 11:17:12 +00:00
Daniel P. Berrange
a27e4fbb72 Rename bitmap.{c,h} to virbitmap.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-21 11:17:12 +00:00
liguang
8b9bf7879b Add support for offline migration
Offline migration transfers inactive definition of a domain (which may
or may not be active). After successful completion, the domain remains
in its current state on source host and is defined but inactive on
destination host. It's a bit more clever than virDomainGetXMLDesc() on
source host followed by virDomainDefineXML() on destination host, as
offline migration will run pre-migration hook to update the domain XML
on destination host. Currently, copying non-shared storage is not
supported during offline migration.

Offline migration can be requested with a new migration flag called
VIR_MIGRATE_OFFLINE (which has to be combined with
VIR_MIGRATE_PERSIST_DEST flag).
2012-12-10 21:52:15 +01:00
Peter Krempa
989a427de8 virsh: Fix usage of header termios.h
The termios struct exported by the termios.h header is used as an
argument for vshMakeStdinRaw(). The header isn't used anywhere in
tools/virsh-domain.c.

This patch adds the header to the header declaring vshMakeStdinRaw() and
removes other places in virsh.
2012-12-07 14:21:25 +01:00
Peter Krempa
bf72095954 virsh: Report errors if arguments of the schedinfo command are incorrect
Libvirt's helper API's when called directly don't raise the error so
that virsh remembers it. Subsequent calls to libvirt API's might reset
the error.

In case of schedinfo virDomainFree() in the cleanup section resets the
error when virTypedParameterAssignFromStr() fails.

This patch adds function vshSaveLibvirtError() that can be called after
calling libvirt helper APIs to ensure the error is remembered.
2012-12-03 16:37:10 +01:00
Peter Krempa
8312435707 maint: Misc whitespace cleanups 2012-12-03 15:13:32 +01:00
Eric Blake
7243752694 virsh: don't crash if shutdown --mode not provided
virStringSplit requires a non-NULL input, but commit cef78ed forgot
to follow the rule.

* tools/virsh-domain.c (cmdReboot, cmdShutdown): Avoid NULL deref.
2012-11-30 14:56:30 -07:00
Daniel P. Berrange
cef78ed84a Allow comma separated list of shutdown/reboot modes with virsh
The shutdown and reboot commands in virsh allow a comma
separated list of mode values

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-30 20:05:43 +00:00
Daniel P. Berrange
76d9f65644 Introduce two new methods for triggering controlled shutdown/reboot
The virDomainShutdownFlags and virDomainReboot APIs allow the caller
to request the operation is implemented via either acpi button press
or a guest agent. For containers, a couple of other methods make
sense, a message to /dev/initctl, and direct kill(SIGTERM|HUP) of
the container init process.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-30 19:19:38 +00:00
Ján Tomko
dc04b2a737 virsh: use correct sizeof when allocating cpumap
Found by coverity:
Error: SIZEOF_MISMATCH (CWE-569):
    libvirt-0.10.2/tools/virsh-domain.c:4754: suspicious_sizeof: Passing
    argument "8UL /* sizeof (cpumap) */" to function
    "_vshCalloc(vshControl *, size_t, size_t, char const *, int)" and
    then casting the return value to "unsigned char *" is suspicious.

Error: SIZEOF_MISMATCH (CWE-569):
    libvirt-0.10.2/tools/virsh-domain.c:4942: suspicious_sizeof: Passing
    argument "8UL /* sizeof (cpumap) */" to function
    "_vshCalloc(vshControl *, size_t, size_t, char const *, int)" and
    then casting the return value to "unsigned char *" is suspicious.
2012-11-29 10:10:08 -07:00
Daniel P. Berrange
d9a52520c7 Add a 'send-process-signal' command to virsh
* tools/virsh.c: Add send-process-signal
* tools/virsh.pod: Document new command

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-29 15:50:12 +00:00
Michal Privoznik
4ded3fb1c2 maint: Fix use of invalid reboot flags
Throughout the code, we've always used VIR_DOMAIN_SHUTDOWN* flags
even for virDomainReboot() API and its implementation. Fortunately,
the appropriate macros has the same value. But if we want to keep
things consistent, we should be using the correct macros. This
patch doesn't break anything, luckily.
2012-11-28 17:45:30 +01:00
Martin Kletzander
1d4f41fdbe virsh: Rewrite cmdDomDisplay
Just a little rewrite of the cmdDomDisplay function to make it
consistent and hopefully more readable.  This also fixes a problem
with password not being displayed for vnc even with the
"--include-password" option.
2012-11-28 16:22:10 +01:00
Michal Privoznik
47c724e54f virsh: Expose new virDomainFSTrim API
It's exposed under domfstrim command. Although the API
doesn't support specifying mount point yet, expose it
anyway.
2012-11-28 16:15:01 +01:00
Eric Blake
79caaf70ae Revert "virsh: add aliases 'boot', 'stop', and 'restart'"
This reverts commits 5f63a5cb42
and ff86b0c97b.  After much list
discussion, consensus was that libvirt aliases should be reserved
to correct typos, otherwise it risks confusion.  Rather, we
should implement a way for users to provide their own aliases
as part of their virsh configuration preferences.
2012-11-16 08:23:57 -07:00
Ján Tomko
58110b4887 virsh: save: report an error if XML file can't be read
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=876868
2012-11-15 22:21:35 -07:00
Viktor Mihajlovski
2bbe624e1d virsh: Use virNodeGetCPUMap if possible
Modified the places where virNodeGetInfo was used for the purpose
of obtaining the maximum node CPU number. Transparently falling
back to virNodeGetInfo in case of failure.
Wrote utility function vshNodeGetCPUCount to compute node CPU
number.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-11-15 09:06:54 -07:00
Eric Blake
ff86b0c97b virsh: add aliases 'boot', 'stop', and 'restart'
https://bugzilla.redhat.com/show_bug.cgi?id=873344 suggested that
the grouping 'boot', 'shutdown', 'reboot'; as well as the grouping
'start', 'stop', 'restart'; might be easier to remember than the
current mix of 'start', 'shutdown', 'reboot'.

Also, touch up the wording of 'reboot' to be more accurate.

* tools/virsh-domain.c (domManagementCmds): Add other command names.
* tools/virsh.pod (start, shutdown, reboot): Document the aliases.
2012-11-06 08:03:48 -07:00
Daniel P. Berrange
1c04f99970 Remove spurious whitespace between function name & open brackets
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-02 13:36:49 +00:00
Laine Stump
def31e4c58 qemu: fix attach/detach of netdevs with matching mac addrs
This resolves:

   https://bugzilla.redhat.com/show_bug.cgi?id=862515

which describes inconsistencies in dealing with duplicate mac
addresses on network devices in a domain.

(at any rate, it resolves *almost* everything, and prints out an
informative error message for the one problem that isn't solved, but
has a workaround.)

A synopsis of the problems:

1) you can't do a persistent attach-interface of a device with a mac
address that matches an existing device.

2) you *can* do a live attach-interface of such a device.

3) you *can* directly edit a domain and put in two devices with
matching mac addresses.

4) When running virsh detach-device (live or config), only MAC address
is checked when matching the device to remove, so the first device
with the desired mac address will be removed. This isn't always the
one that's wanted.

5) when running virsh detach-interface (live or config), the only two
items that can be specified to match against are mac address and model
type (virtio, etc) - if multiple netdevs match both of those
attributes, it again just finds the first one added and assumes that
is the only match.

Since it is completely valid to have multiple network devices with the
same MAC address (although it can cause problems in many cases, there
*are* valid use cases), what is needed is:

1) remove the restriction that prohibits doing a persistent add of a
netdev with a duplicate mac address.

2) enhance the backend of virDomainDetachDeviceFlags to check for
something that *is* guaranteed unique (but still work with just mac
address, as long as it yields only a single results.

This patch does three things:

1) removes the check for duplicate mac address during a persistent
netdev attach.

2) unifies the searching for both live and config detach of netdevices
in the subordinate functions of qemuDomainModifyDeviceFlags() to use the
new function virDomainNetFindIdx (which matches mac address and PCI
address if available, checking for duplicates if only mac address was
specified). This function returns -2 if multiple matches are found,
allowing the callers to print out an appropriate message.

Steps 1 & 2 are enough to fully fix the problem when using virsh
attach-device and detach-device (which require an XML description of
the device rather than a bunch of commandline args)

3) modifies the virsh detach-interface command to check for multiple
matches of mac address and show an error message suggesting use of the
detach-device command in cases where there are multiple matching mac
addresses.

Later we should decide how we want to input a PCI address on the virsh
commandline, and enhance detach-interface to take a --address option,
eliminating the need to use detach-device

* src/conf/domain_conf.c
* src/conf/domain_conf.h
* src/libvirt_private.syms
  * added new virDomainNetFindIdx function
  * removed now unused virDomainNetIndexByMac and
    virDomainNetRemoveByMac

* src/qemu/qemu_driver.c
  * remove check for duplicate max from qemuDomainAttachDeviceConfig
  * use virDomainNetFindIdx/virDomainNetRemove instead
    of virDomainNetRemoveByMac in qemuDomainDetachDeviceConfig
  * use virDomainNetFindIdx instead of virDomainIndexByMac
    in qemuDomainUpdateDeviceConfig

* src/qemu/qemu_hotplug.c
  * use virDomainNetFindIdx instead of a homespun loop in
    qemuDomainDetachNetDevice.

* tools/virsh-domain.c: modified detach-interface command as described
    above
2012-10-26 20:47:54 -04:00
Ján Tomko
c0fab87106 virsh: remove reference to migration in blockcopy 2012-10-11 21:12:45 -06:00
Ján Tomko
13fefaf37f virsh: block SIGINT while getting BlockJobInfo
SIGINT hasn't been blocked, which could lead to losing it somewhere in
virDomainGetBlockJobInfo and not aborting the job.
2012-10-11 21:01:54 -06:00
Jiri Denemark
28f8dfdccc Add MIGRATABLE flag for virDomainGetXMLDesc
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.

This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
2012-10-11 15:11:42 +02:00
Eric Blake
4ecb723b9e maint: fix up copyright notice inconsistencies
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/
2012-09-20 16:30:55 -06:00
Eric Blake
ed23b10660 blockjob: add virsh blockcommit
The new command 'virsh blockcommit $dom $disk' requests the start
of an asynchronous commit operation across the entire chain of
$disk.  Further arguments can fine-tune which portion of the
chain is committed.  Existing 'virsh blockjob' commands can then
track the status, change the bandwidth, or abort the commit job.

With a bit more on the command line, 'virsh blockcommit $dom $disk
--wait --verbose' can be used for blocking behavior, with visual
feedback on the overall status, and can be canceled with Ctrl-C.

The overall design, including the wait loop logic, borrows heavily
from the existing blockpull command.

* tools/virsh-domain.c (cmdBlockCommit): New function.
* tools/virsh.pod (blockcommit): Document it.
2012-09-17 21:44:49 -06:00
Hu Tao
0831a5bade bitmap: new member variable and function renaming
Add a new member variable map_len to store map len of bitmap.
and rename size to max_bit accordingly.

rename virBitmapAlloc to virBitmapNew.
2012-09-17 14:59:36 -04:00
Osier Yang
f5fb059a78 virsh: Don't motify the const string
This improve helper vshStringToArray to accept const string as
argument instead. To not convert the const string when using
vshStringToArray, and thus avoid motifying it.
2012-09-17 11:29:31 +08:00
Eric Blake
2387aa26c1 maint: fix missing spaces in message
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8

True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.

* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
2012-09-12 11:55:29 -06:00
Peter Krempa
51907779ee virsh: Update only changed scheduler tunables
When setting the cpu tunables in virsh you are able to update only a
subset of them. Virsh while doing the update updated all of the
tunables, changed ones with new values and unchanged with old ones.
This is unfortunate as it:
a) might overwrite some other change by a race condition (unprobable)
b) fails with range checking as some of the old values saved might be
   out of range

This patch changes the update procedure so that only the changed value
is updated on the host.

This patch also fixes a very unprobable memory leak if the daemon would
return a string tunable parameter, as the typed parameter array was not
cleared.
2012-09-07 08:08:37 +02:00
Osier Yang
f7eac4f722 list: Add helper to convert strings separated by ', ' to array
tools/virsh.c: New helper function vshStringToArray.
tools/virsh.h: Declare vshStringToArray.
tools/virsh-domain.c: use the helper in cmdUndefine.
2012-09-06 22:04:43 +08:00
Eric Blake
44342a0efe build: use re-entrant functions in virsh
Yesterday's commit 15d2c9f pointed out that virsh was still using
localtime(), which is not thread-safe, even though virsh is
definitely multi-threaded.  Even if we only ever triggered it from
one thread, it's better safe than sorry for maintenance purposes.

* cfg.mk (exclude_file_name_regexp--sc_prohibit_nonreentrant):
Tighten the rule.
* tools/virsh.c (vshOutputLogFile): Avoid localtime.
(vshEditWriteToTempFile, vshEditReadBackFile, cmdCd, cmdPwd)
(vshCloseLogFile): Avoid strerror.
* tools/console.c (vshMakeStdinRaw): Likewise.
* tools/virsh-domain.c (vshGenFileName): Fix spacing in previous
patch.
2012-09-05 11:09:04 -06:00
Martin Kletzander
aa698a49dd docs: correct dompmwakeup description 2012-09-05 06:36:55 +02:00
Paul Eggert
15d2c9fad4 Pass a correct pointer type to localtime_r(3).
On 09/04/2012 08:20 AM, Eric Blake wrote:
> tv_sec is required by POSIX to be
> of type time_t; so this is a bug in the OpenBSD header
> [for declaring it as long]

Most likely this problem arose because of the patch I pushed
in gnulib commit e07d7c40f3ca5ec410cf5aa6fa03cfe51e712039.
Previously, gnulib required timeval's tv_sec to be
the same size as time_t.  But now, it requires only that
tv_sec be big enough to hold a time_t.

This patch was needed for Emacs.  Without the patch, gnulib
replaced struct timeval on OpenBSD, and this messed up
utimens.c, and Emacs wouldn't build.

Alternatively, gnulib could substitute its own struct timeval
for the system's, wrapping every struct timeval-using function
(gettimeofday, futimesat, futimes, lutimes, etc.  That'd be
more work, though.  And it would introduce some performance
issues with gettimeofday, which is supposed to be fast.

I've been trying to get away from using struct timeval,
and to use the higher-resolution struct timespec instead,
so messing with these obsolescent interfaces has been
lower priority for me.  But if someone wants to take the
more-ambitious approach that'd be fine, I expect.

For this particular case, though, how about if we avoid
the problem entirely?  libvirt doesn't need to use struct
timeval here at all.  It makes libvirt smaller and probably
faster, and it ports to OpenBSD without messing with gnulib.
2012-09-04 17:20:08 -06:00
Peter Krempa
67f83cd497 virsh: remove unneeded usage of vshConnectionUsability()
Now that vshCommandRun() checks for the connection automaticaly, remove
all of the redundant checks in the code.

vshConnectionUsability() no longer needs to be exported and this patch
marks it static.
2012-08-31 16:22:22 +02:00
Guannan Ren
c3e7245af5 doc: update option force to subcommand change-media
BZ: https://bugzilla.redhat.com/show_bug.cgi?id=837761
2012-08-31 18:17:02 +08:00
Hu Tao
4860596044 new command emulatorpin 2012-08-22 16:38:13 +08:00
Hu Tao
272570dffb Add a new function vshPrintPinInfo.
This is a helper function to print vcpu pin info.
2012-08-22 16:35:50 +08:00
Eric Blake
4c10b3c7da virsh: declare more common functions
In preparation for splitting virsh-interface.c, I found these
functions need to be declared in virsh.h, as well as one that
belongs more properly in virsh-domain.h.  Also, since we
use the VSH_BY* flags in more than one function, I improved
how they are used.

* tools/virsh.h (vshNameSorter, vshCmdHasOption): Declare.
(VSH_BYID): Turn into enum.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.h): ...here.
* tools/virsh.c: (vshNameSorter): Export.
(cmd_has_option): Rename...
(vshCmdHasOption): ...and export.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.c (vshCommandOptDomainBy): ...here, adjust
signature, and check flags.
* tools/virsh-network.c (vshCommandOptNetworkBy): Update callers.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh-domain-monitor.c (includes): Likewise.
* tools/virsh-host.c (includes): Likewise.
2012-08-20 23:56:18 -06:00
Eric Blake
99ae57f841 virsh: split out virsh-domain-monitor.c
Another file worth compiling on its own instead of by .c inclusion.

* tools/virsh-domain-monitor.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.h (vshGetDomainDescription): Move to correct
header.
* tools/virsh-domain-monitor.c: Use new header.
* tools/virsh.c: Likewise.
* tools/virsh-domain.c: Likewise.
2012-08-20 23:39:54 -06:00
Daniel P. Berrange
6a48179803 Fix build of virsh on Win32 by moving SA_SIGINFO stub
On Win32 SA_SIGINFO is not defined, so virsh.c stub'd it out
to 0, but recent changes moved the usage out of virsh.c and
into virsh-domain.c
2012-08-20 16:00:29 +01:00
Eric Blake
e68ee5e765 virsh: use common namespacing
Convert the exported items in virsh.h to use a common 'vsh' prefix.

* tools/virsh.h (VIRSH_MAX_XML_FILE): Rename...
(VSH_MAX_XML_FILE): ...and parenthesize.
(DIFF_MSEC, CTRL_CLOSE_BRACKET): Delete.
(vshUsage, vshInit, vshDeinit, vshParseArgv): Remove prototype.
(editWriteToTempFile, editFile, editReadBackFile, prettyCapacity)
(virshReportError): Rename...
(vshEditWriteToTempFile, vshEditFile, vshEditReadBackFile)
(vshPrettyCapacity, vshReportError): ...into vsh namespace.
(jobWatchTimeoutFunc): Move to virsh-domain.c.
* tools/virsh.c (vshCommandRun): Inline former DIFF_MSEC.
(main): Inline former CTRL_CLOSE_BRACKET.
(vshUsage, vshInit, vshDeinit, vshParseArgv): Make static.
(prettyCapacity, virshReportError, editWriteToTempFile, editFile):
Fix naming, and adjust usage.
(vshAskReedit, vshCommandRun, vshEventLoop, vshInit): Adjust
usage.
* tools/virsh-domain.c (cmdAttachDevice, cmdCPUCompare)
(cmdCPUBaseline, cmdCreate, cmdDefine, cmdDetachDevice)
(cmdUpdateDevice, cmdDesc, cmdUndefine, cmdStart, cmdVcpucount)
(cmdAttachDevice, cmdDomjobinfo): Likewise.
* tools/virsh-edit.c (do): Likewise.
* tools/virsh-interface.c (cmdInterfaceDefine): Likewise.
* tools/virsh-network.c (cmdNetworkCreate, cmdNetworkDefine):
Likewise.
* tools/virsh-nodedev.c (cmdNodeDeviceCreate): Likewise.
* tools/virsh-nwfilter.c (cmdNWFilterDefine): Likewise.
* tools/virsh-pool.c (cmdPoolCreate, cmdPoolDefine)
(cmdPoolDiscoverSources, cmdPoolList): Likewise.
* tools/virsh-secret.c (cmdSecretDefine): Likewise.
* tools/virsh-snapshot.c (cmdSnapshotCreate, vshSnapshotCreate)
(vshLookupSnapshot, cmdSnapshotEdit, cmdSnapshotCurrent)
(vshGetSnapshotParent): Likewise.
* tools/virsh-volume.c (cmdVolCreate, cmdVolCreateFrom)
(cmdVolInfo, cmdVolList): Likewise.
2012-08-20 07:04:10 -06:00
Eric Blake
f4a7b87de0 virsh: split out virsh-domain.c
The virsh-domain.c file was pretty self-contained; the only
entry point was the table of command definitions.  The bulk
of this patch is making more functions in virsh.c reusable.
A later patch will clean up poor naming choices.

* tools/Makefile.am (virsh_SOURCES): Build virsh-domain.c.
* tools/virsh-domain.h: New file.
* tools/virsh.h (virshReportError, vshResetLibvirtError)
(vshAskReedit, vshStreamSink): Declare.
* tools/virsh.c: Switch from using .c to .h.
(virshReportError, vshResetLibvirtError, vshAskReedit)
(vshStreamSink, prettyCapacity): Export.
(vshCatchInt): Move...
* tools/virsh-domain.c: ...into sole user.  Use header.
2012-08-17 22:22:42 -06:00
Eric Blake
8e8809e131 virsh: move vshWatchJob earlier
It's easier to order things in topological order than it is to
forward declare in one file for use only by one other file.

* tools/virsh.c (vshWatchJob, parseRateStr)
(vshDomainStateToString, vshDomainStateReasonToString)
(vshDomainControlStateToString, vshDomainVcpuStateToString): Drop
useless prototypes.
* tools/virsh-domain.c (vshWatchJob): Move earlier.
2012-08-17 21:44:14 -06:00
Daniel P. Berrange
9ef12b6ff5 Fix WIN32 conditional for disabling console command
The '#endif' for a WIN32 conditional was placed one function
too high, leaving the impl of the console command enabled
and referencing functions that were disabled
2012-08-15 21:43:01 +01:00
Ján Tomko
863399f06b virsh: say save-image-edit failed only when it does
The common code for editing files in virsh-edit.c expects EDIT_DEFINE to
return 0 on failure. virDomainSaveImageDefineXML returns 0 on success.
2012-08-14 08:54:55 +08:00
Peter Krempa
3df9626c40 virsh: Refactor error clearing on graceful fallback paths
Virsh uses an error handler to save errors from libvirt. On some code
paths it's needed to clear libvirt errors and continue on fallback code
paths without reporting failure.

This patch adds function vshResetLibvirtError() that clears error
returned by libvirt and updates all places where the old two-line method
was used.
2012-07-27 10:28:22 +02:00
Peter Krempa
dcfb7050c4 virsh: Check for existence of storage before undefining the domain
When undefining a domain and removing associated storage using "virsh
undefine --storage" the domain was at first undefined and after that the
storage removal proces was started. If the user specified an invalid
disk to remove, the error could not be corrected.

This patch moves enumeration and filtering of volumes that should be
removed before the domain is undefined, but the removal process is still
kept after the domain has been undefined.
2012-07-26 12:57:26 +02:00
Osier Yang
c4bdf307e0 virsh: Move command group definition into its own file
* virsh-domain-monitor.c: Add domMonitoringCmds
* virsh-domain.c: Add domManagementCmds
* virsh-host.c: Add hostAndHypervisorCmds
* virsh-interface.c: Add ifaceCmds
* virsh-network.c: Add networkCmds
* virsh-nodedev.c: Add nodedevCmds
* virsh-nwfilter.c: Add nwfilterCmds
* virsh-pool.c: Add storagePoolCmds
* virsh-secret.c: Add secretCmds
* virsh-snapshot.c: Add snapshotCmds
* virsh-volume.c: Add storageVolCmds
* virsh.c: Remove all the above *Cmds.
2012-07-26 12:00:43 +08:00
Osier Yang
73b89ed838 virsh: Split cmds of domain group from virsh.c
This splits commands to manage domain into virsh-domain.c,The helpers
not for common use are moved into them too. Standard copyright is added
for the new file.

* tools/virsh.c:
  - Remove commands for domain group, and one helper
    (vshDomainVcpuStateToString)
  - vshStreamSink is moved before commands's definition for it's
    also used by commands not of domain group, such as volUpload.

* tools/virsh-domain.c:
  - New file, commands for domain group and the one helper are
    moved into it.

* po/POTFILES.in:
  - Add virsh-domain.c

* cfg.mk:
  - Skip to check config.h including for virsh-domain.c
2012-07-26 11:57:18 +08:00