virshDomainFree handles NULL pointers gracefully, so there's no need to
check the pointer before the call.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The changes for sparse stream support started passing
virshStreamCallbackDataPtr to virshStreamSink
instead of passing a simple file descriptor, but
forgot to adjust all the callers.
Fix it in cmdScreenshot as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1875195
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 9e745a9717
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
A wireshark plugin must declare what major and minor version it
was built with as these are checked when wireshark loads plugins.
On the top of that, we use major + minor + micro to adapt to
changed API between releases. So far, we were getting these
version numbers from wireshark/config.h.
And while most distributions install wireshark/config.h file some
don't. On distros shipping it it's hack^Wsaved during built by
packaging system and installed later. But some distros are not
doing that. At least not for new enough wireshark because as of
wireshark's commit v2.9.0~1273 the ws_version.h is installed
which contains the version macros we need and is installed by
wireshark itself.
But of course, some distros which have new enough wireshark
packaged do not ship ws_version.h and stick to the hack. That is
why we can't simply bump the minimal version and switch to the
new header file. We need a configure check and adopt our code to
deal with both ways. At least for the time being.
Based on Andrea's original patch:
https://www.redhat.com/archives/libvir-list/2020-September/msg00156.html
Closes: https://gitlab.com/libvirt/libvirt/-/issues/74
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Adds new typed param for migration and uses this as a UNIX socket path that
should be used for the NBD part of migration. And also adds virsh support.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
As it turned out my previous commits which switched from HAVE_ to
WITH_ and dropped stdarg.h detection were a bit too aggressive.
Because of reasons described in 9ea3424a17 we need to define
HAVE_STDARG_H before including readline otherwise macos build
fails. Honestly, I still don't fully understand the problem so I
am not going to bother you with "explanation".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This allows us to drop include of readline header files from
virsh.c and virt-admin.c because they needed it only because of
the add_history() function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we are mixing: #if HAVE_BLAH with #if WITH_BLAH.
Things got way better with Pavel's work on meson, but apparently,
mixing these two lead to confusing and easy to miss bugs (see
31fb929eca for instance). While we were forced to use HAVE_
prefix with autotools, we are free to chose our own prefix with
meson and since WITH_ prefix appears to be more popular let's use
it everywhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In packet-libvirt.c in wireshark dissector we include rpc/types.h
but guard the include with a condition (that is supposed to be
true if we detected during configure phase that the host system
has the header file). Thing is, it looks like we were never doing
the configure check and thus the file was never included and yet,
the NSS plugin works. Drop the include then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
It seems wireshark has migrated to gitlab in the meantime.
Point there instead of to the dead svn repo.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
This patch takes care of just the obvious cases: there are
many more situations where the data we pass to configure_file()
could likely be obtained in a more effective way, but we can
address the low-hanging fruits as a first approximation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When switching to meson, some of HAVE_* macros were renamed to
WITH_ because they did not reflect whether the build platform has
or doesn't have something, but whether we are building with some
functionality turned on or off. This is the case with
HAVE_BSD_NSS macro too. As a result, the NSS plugin built on BSD
did not expose nss_module_register() function which made the
plugin unusable:
https://www.redhat.com/archives/libvir-list/2020-September/msg00000.html
Fixes: c742687055
Reported-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Split those initializations that depend on a statement
above them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For iscsi-direct pool, the initiator is necessary for pool defining:
<pool type="iscsi-direct">
...
<initiator>
<iqn name="iqn.2013-06.com.example:iscsi-initiator"/>
</initiator>
...
</pool>
Add --source-initiator to fill the initiator iqn for
pool-create-as/pool-define-as subcommands.
https://bugzilla.redhat.com/show_bug.cgi?id=1658082
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is very similar to previous commit.
The virshStreamInData() callback is used by virStreamSparseSendAll()
to detect whether the file the data is read from is in data or hole
section. The SendAll() will then send corresponding type of virStream
message to make server create a hole or write actual data. But the
callback uses virFileInData() even for block devices, which results in
an error. Just like in previous commit, emulate a DATA section
for block devices.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1852528
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This callback is called when the server sends us STREAM_HOLE
meaning there is no real data, only zeroes. For regular files
we would just seek() beyond EOF and ftruncate() to create the
hole. But for block devices this won't work. Not only we can't
seek() beyond EOF, and ftruncate() will fail, this approach won't
fill the device with zeroes. We have to do it manually.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1852528
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We can't use virFileInData() with block devices, but we can
emulate being in data section all the time (vol-upload case).
Alternatively, we can't just lseek() beyond EOF with block
devices to create a hole, we will have to write zeroes
(vol-download case). But to decide we need to know if the FD we
are reading data from / writing data to is a block device. Store
this information in _virshStreamCallbackData.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These callback will need to know more that the FD they are
working on. Pass the structure that is passed to other stream
callbacks (e.g. virshStreamSource() or virshStreamSourceSkip())
instead of inventing a new one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Right now we're unconditionally adding RPATH information to the
installed binaries and libraries, but that's not always desired.
autotools seem to be smart enough to only include that information
when targeting a non-standard prefix, so most distro packages
don't actually contain it; moreover, both Debian and Fedora have
wiki pages encouraging packagers to avoid setting RPATH:
https://wiki.debian.org/RpathIssuehttps://fedoraproject.org/wiki/RPath_Packaging_Draft
Implement RPATH logic that Does The Right Thing™ in the most
common cases, while still offering users the ability to override
the default behavior if they have specific needs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The timeout argument for guest-agent-timeout is optional but it did not
have proper default value specified. Also update the virsh man page
accordingly.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In libvirt 6.6 stopping guests with libvirt-guests.sh is broken.
As soon as there is more than one guest one can see
`systemctl stop libvirt-guests` failing and in the log we see:
libvirt-guests.sh[2455]: Running guests on default URI:
libvirt-guests.sh[2457]: /usr/lib/libvirt/libvirt-guests.sh: 120:
local: 2a49cb0f-1ff8-44b5-a61d-806b9e52dae2: bad variable name
libvirt-guests.sh[2462]: no running guests.
That is due do mutliple guests becoming a list of UUIDs. Without
recognizing this as one single string the assignment breaks when using 'local'
(which was recently added in 6.3.0). This is because local is defined as
local [option] [name[=value] ... | - ]
which makes the shell trying handle the further part of the string as
variable names. In the error above that string isn't a valid variable
name triggering the issue that is seen.
This depends on the shell being used. POSIX shells don't have 'local'
specified yet and for the common shells it depends. It worked in bash and
bash-in-POSIX-mode, but for example dash in POSIX mode triggers the issue.
To resolve that 'textify' all assignments that are strings or potentially
can become such lists (even if they are not using the local qualifier).
Fixes: 08071ec0 "tools: variables clean-up in libvirt-guests script"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
GCC 10 complains about "arg" possibly being a NULL dereference.
Even though it might be a false positive, we can easily avoid it.
Avoiding
../tools/vsh.c: In function ‘vshCommandOptStringReq’:
../tools/vsh.c:1034:19: error: potential null pointer dereference [-Werror=null-dereference]
1034 | else if (!*arg->data && !(arg->def->flags & VSH_OFLAG_EMPTY_OK))
| ~~~^~~~~~
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
virLoginShellGetShellArgv was not dereferencing the pointer
to the string list containing the shell parameters from the
config file, thus setting some random number as shargvlen.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 740e4d7052
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After the split of virsh to multiple files, and the subsequent
split to vsh/virt-admin, there are quite a few leftovers.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The commands daemon-log-filters and daemon-log-outputs
are used both for getting and setting the variables.
But the getter receives an allocated string, which
we do not free.
Use separate variables for the getter and the setter
to get rid of the memory leak and to stop casting
away the const.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Some of libvirt APIs return the number of elements, but we
don't need them, only whether the API failed or not.
Delete the redundant variables.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Although virXPathNodeSet is unlikely to return -1, we should
check for it properly or not at all.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Instead of using environment variables pass the values to the script
as arguments.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Most likely rarely changed with configure option and it is used only
as fallback if there is no VISUAL or EDITOR environment variable.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
There is no point of having this option in libvirt because the debug
logs can be configured using log filters.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The switch to GDateTime removed the last use.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 3caa28dc50
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
GCC 10 complains about "desc" possibly being a NULL dereference. Even
though it is a false positive, we can easily avoid it.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With meson introduction which is using the same CFLAGS for the whole
project some compilation errors were discovered. The wireshark plugin
library is the only one in tools directory that is not using AM_CFLAGS.
With the AM_CFLAGS we get these errors:
../../tools/wireshark/src/packet-libvirt.c: In function 'dissect_libvirt_fds':
../../tools/wireshark/src/packet-libvirt.c:348:31: error: unused parameter 'tvb' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~~~~~~^~~
../../tools/wireshark/src/packet-libvirt.c:348:41: error: unused parameter 'start' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~^~~~~
../../tools/wireshark/src/packet-libvirt.c:348:55: error: unused parameter 'nfds' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~~~^~~~
At top level:
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_bool' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:88:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
88 | XDR_PRIMITIVE_DISSECTOR(bool, bool_t, boolean)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_float' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:86:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
86 | XDR_PRIMITIVE_DISSECTOR(float, gfloat, float)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_short' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:80:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
80 | XDR_PRIMITIVE_DISSECTOR(short, gint16, int)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c: In function 'dissect_libvirt_message':
../../tools/wireshark/src/packet-libvirt.c:423:34: error: null pointer dereference [-Werror=null-dereference]
423 | vir_xdr_dissector_t xd = find_payload_dissector(proc, type, get_program_data(prog, VIR_PROGRAM_DISSECTORS),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
424 | *(gsize *)get_program_data(prog, VIR_PROGRAM_DISSECTORS_LEN));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_auto* pointers to avoid the need for the cleanup label. The
type of the pointer 'virDomainPtr dom' was changed to its alias
'virshDomainPtr' to allow the use of g_autoptr().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto* in the string and in the bitmap. Remove the
cleanup label since it's now unneeded.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The srv-XXX commands were renamed to server-XXX, with the old
name being a undocumented back compat alias only.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Network interfaces are simply attached to a bridge device.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When a block copy job fails prior to reaching the synchronized phase
while we are waiting for the job to finish virsh would print the
following:
$ virsh blockcopy backup-test vda /tmp/dst.qcow2 --wait --reuse-external --transient-job
error:
Copy failed
The above message looks like we've forgot to print the error message
itself as the line ends after 'error:'. Unfortunately with the current
API design clients have no way of actually getting the error message as
the VIR_DOMAIN_EVENT_ID_BLOCK_JOB(_2) event only reports the status but
not an error and the job then vanishes.
Fix the expectations by using vshPrintExtra instead of vshError:
$ virsh blockcopy backup-test vda /tmp/dst.qcow2 --wait --reuse-external --transient-job
Copy failed
Note that the newline is required to avoid printing the 'Copy failed'
message on the same line when printing the job progress percentage.
Inspired by https://bugzilla.redhat.com/show_bug.cgi?id=1847867
Fix the same issue also for block pull and block commit job
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add checking in virt-host-validate for secure guest support
on x86 for AMD Secure Encrypted Virtualization.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add checking in virt-host-validate for secure guest support
on s390 for IBM Secure Execution.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Compilers are not very good at detecting this problem. Fixed by manual
inspection of compilation warnings after replacing 'VIR_FREE' with an
empty macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
This is convenience macro, use it more. This commit was generated
using the following spatch:
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
...
- old = ctxt->node;
... when != old
- ctxt->node = old;
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old = ctxt->node;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
... when != old
- ctxt->node = old;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This partially reverts fe65e9c8b5.
In the referenced commit I removed @ret from
virHostValidateBhyve() thinking it wasn't used when in fact it is
- it's usage is hidden under MODULE_STATUS_WARN(). Reintroduce
the variable back.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are few places where a return variable is introduced (ret
or retval), but then is never changed and is then passed to
return. Well, we can return the value that the variable is
initialized to directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After the commit dc0771c, ret variable no longer
represents the status of the return code, use
data->ret replace it.
Signed-off-by: Xu Yandong <xuyandong2@huawei.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases it's useful to report the error which caused the domain
job to fail. Add an optional field for holding the error message so that
it can be later retrieved from statistics of a completed job.
Add the field name macro and code for extracting it in virsh.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the job monitoring logic was refactored, these two commands
were not converted properly and the result is that a successful
dump or migration (char '0') would be reported as a failed one
(int 48) instead.
Fixes: dc0771cfa2
Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 86608f787e added the above flag as an alias for ambiguous
'delete-snapshots' flag, but forgot to actually change the code that
extracts it, thus the new version actually doesn't work.
https://bugzilla.redhat.com/show_bug.cgi?id=1821988
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've adopted reStructuredText as the primary markup language for
our documentation and, given that both GitLab and GitHub can render
documents in this format just fine, it makes sense to get rid of
the few last remaining bits of Markdown and standardize on
reStructuredText across the board.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Redeclared variables in script functions marked as local.
Variables `guest_running` and `guests_shutting_down` in the
functions 'guest_is_on` and `check_guests_shutdown` were
untouched, as the functions returned values in these
variables.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to add many more later, so start by adjusting the
existing ones to more closely follow the example set by libvirtd.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately, yajl_free() is not NOP on NULL. It really does
expect a valid pointer. Therefore, check whether the pointer we
want to pass to it is NULL or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
POWER hosts does not implement CPU virtualization extensions like
x86 or s390x. Instead, all bare-metal POWER hosts are considered
to be virtualization ready.
For POWER, the validation is done by checking if the virtualization
module kvm_hv is loaded in the host. If not, we should warn the
user about it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
wire-up virAdmServerUpdateTlsFiles API into virt-admin client.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wu Qingliang <wuqingliang4@huawei.com>
Use 'g_autoptr' which mandates initialization for 'hostname' and also
for 'domain' to allow full refactor of the cleanup path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After the introduction of virenum.h in commit 285c5f28c4,
it is only needed in the C file.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Historically, this file was a dump for most of our helper
functions and needed almost everywhere.
With the introduction of virfile.h and virstring.h,
and more importantly, virenum.h and the introduction
of GLib, that is no longer true.
Remove its include from C files that don't even use it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Simplify gathering the actual return value from a passed-through QMP
command when using 'qemu-monitor-command' by adding '--return-value'
switch which just extracts the 'return' section and alternatively
reports an error if the section is not present.
This simplifies gathering of some test data where the full reply would
need to be trimmed just for the actual return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For long running jobs (save, managed save, dump & live migrate)
virsh runs a background thread for executing the job and then
has the main thread catch Ctrl-C for graceful shutdown, as well
as displaying progress info.
The monitoring code is written using poll, with a pipe used
to get the completion status from the thread. Using a pipe
and poll is problematic for Windows portability. This rewrites
the code to use a GMainLoop instance for monitoring stdin and
doing progress updates. The use of a pipe is entirely eliminated,
instead there is just a shared variable between both threads
containing the job completion status.
No mutex locking is used because the background thread writes
to the variable only when the main loop is still running,
while the foreground thread only reads it after the main loop
has exited.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pvpanic device supports bit 1 as crashloaded event, it means that
guest actually panicked and run kexec to handle error by guest side.
Handle crashloaded as a lifecyle event in libvirt.
Test case:
Guest side:
before testing, we need make sure kdump is enabled,
1, build new pvpanic driver (with commit from upstream
e0b9a42735f2672ca2764cfbea6e55a81098d5ba
191941692a3d1b6a9614502b279be062926b70f5)
2, insmod new kmod
3, enable crash_kexec_post_notifiers,
# echo 1 > /sys/module/kernel/parameters/crash_kexec_post_notifiers
4, trigger kernel panic
# echo 1 > /proc/sys/kernel/sysrq
# echo c > /proc/sysrq-trigger
Host side:
1, build new qemu with pvpanic patches (with commit from upstream
600d7b47e8f5085919fd1d1157f25950ea8dbc11
7dc58deea79a343ac3adc5cadb97215086054c86)
2, build libvirt with this patch
3, handle lifecycle event and trigger guest side panic
# virsh event stretch --event lifecycle
event 'lifecycle' for domain stretch: Crashed Crashloaded
events received: 1
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
The O_SYNC flag is not defined on Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Always trim the full specified suffix.
All of the callers outside of tests were passing either
strlen or the actual length of the string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Replace all the cases that only supply the length
and do not care about matching a suffix, as well
as that one test case that does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
rpmlint complains about "script-without-shebang" due to the execute
permissions on /usr/share/bash-completion/completions/vsh. Use
INSTALL_DATA instead of INSTALL_SCRIPT to avoid the unnecessary
execute permissions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The Windows platform does not have the signal handling
support we need, so it must be disabled in several parts
of the codebase.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The combination of g_unichar_iszerowidth and
g_unichar_iswide is sufficient to replicate the logic
of wcwidth() for libvirt.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we rely on gnulib creating configmake.h, but we
can easily create it ourselves instead.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This imports a simpler version of GNULIB's getpass() function
impl for Windows. Note that GNULIB's impl was buggy as it
returned a static string on UNIX, and a heap allocated string
on Windows. This new impl always heap allocates.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify human usage of secret-set-value by adding --interactive which
will read the value of the secret from the terminal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow using the contents of --file without base64 decoding.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Print a warning if users pass in secrets as command line arguments and
mention it in the man page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The necessity to specify the secret value as command argument is
insecure. Allow reading the secret from a file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Users might want to get the raw value instead of dealing with base64
encoding. This might be useful for redirection to file and also for
simple human-readable secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Similarly to other libvirt object freeing APIs the function resets the
libvirt error when called and doesn't take NULL gracefully. Install the
workaround and g_autoptr handlers similarly to the 'virshDomain' type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.
There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is
https://gitlab.gnome.org/GNOME/glib/issues/1999
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GNULIB termios module ensures termios.h exists (but
is none the less empty) when building for Windows. We
already exclude usage of the functions that would exist
in a real termios.h, so having an empty termios.h is
not especially useful.
It is simpler to just put all use of termios.h related
functions behind a "#ifndef WIN32" conditional.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a vastly simpler VIR_INT64_STR_BUFLEN constant
which is large enough for all cases where we currently
use INT_BUFSIZE_BOUND. This eliminates most use of the
gnulib intprops.h header.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our virsh already has 'domhostname' command. Add '--source'
argument to it so that users can chose between 'lease' and
'agent' sources. Also, implement completer for the argument.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
--tls-destination would be just ignored unless --tls is not specified,
which is correct, but let's provide a bit of a guidance is a user
forgets to add --tls.
This is just a virsh-only check targeted to end users as we don't
currently have such checks at the API level for migration parameters
that depend on flags.
https://bugzilla.redhat.com/show_bug.cgi?id=1784345
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The 'domifaddr' command accepts several arguments. Let's validate
them first and look up domain to work with only after to save
some RPC cycles should validation fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduced in v5.10.0-449-gcf44ec5577 it used
virshCommaStringListComplete() to generate list of options. But
this is not correct because the '--source' argument of the
'domifaddr' doesn't accept a string list (for instance
"arp,agent,lease") rather than a single string. Therefore, the
completer must return these strings separately and thus must
refrain from using virshCommaStringListComplete().
At the same time, now that we have strings we need declared as
an enum we can use TypeToString() instead of copying strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are more occurrences, but I'm converting --source argument
of domifaddr command only, because I will need it in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
commandhelper.c is not converted since this is a standalone
program only run on UNIX, so can rely on getcwd().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_get_real_time() returns the time since epoch in microseconds.
It uses gettimeofday() internally while libvirt used clock_gettime
because it is declared async signal safe. In practice gettimeofday
is also async signal safe *provided* the timezone parameter is
NULL. This is indeed the case in g_get_real_time().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_pattern_match function_simple is an acceptably close
approximation of fnmatch for libvirt's needs.
In contrast to fnmatch(), the '/' character can be matched
by the wildcards, there are no '[...]' character ranges and
'*' and '?' can not be escaped to include them literally in
a pattern.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Eliminate direct use of normal setenv/unsetenv calls in
favour of GLib's wrapper. This eliminates two gnulib
modules
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The command `domifaddr` can use three different sources to grab IP
address of a Virtual Machine: lease, agent and arp. This parameter does
not have a completer function to return source options.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.
This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html
Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virGetUserCacheDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it clearer that what we're trying to do is find @source and
@target_node so that the unattentive or code analysis utility
doesn't believe 'source' and 'target' could be found in the same
node element.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
My commit e73889b631
split the -Wframe-larger-than warning setting into
two different variables - STRICT_FRAME_LIMIT_CFLAGS
for the library code and RELAXED_FRAME_LIMIT_CFLAGS
which was needed for tests.
Use the strict limit by default and specify the warning
flag twice for the parts that require a larger stack
frame, relying on the fact that the compiler will pick
up the latter value.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is slightly more complicated because NVMe disk source is not
a simple attribute to <source/> element. The format in which the
PCI address and namespace ID are printed is the same as QEMU
accepts them:
nvme://XXXX:XX:XX.X/X
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These days libvirt is pretty reliable and even remote connections
(not the default for libvirt-guests anyway) either work or fail but are
uncommon to be flaky.
On the other hand users might have disabled the service and while we are
After=libvirtd for ordering we are not Requiring it. Adding that or any
harder dependency might break our ordering. But if people have disabled
libvirt they will do a full retry loop until timeout.
Lets drop the loop to be much faster if a remote is not reachable.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1854653
This reverts
commit 4e7fc8305a
Author: Michal Prívozník <mprivozn@redhat.com>
Date: Fri Feb 21 12:46:08 2014 +0100
libvirt-guests: Wait for libvirtd to initialize
The race described in that commit no longer exists using systemd as
we now have socket activation. If not using systemd, then it is also
safe if using the libvirtd --daemon flag, since the parent process
won't return to the caller until the child is accepting connections.
Reported-by: Doug Smythies <dsmythies@telus.net>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Remove the usage where sanity of the length argument is verified
by other conditions not matching the previous patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We abort on allocation errors now so there is no need to
have a function for it.
Replace the only use by return -1, chosen by fair dice roll.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The stats reported for a blockjob which is member of a domain pull
backup refer to the utilization of the scratch file rather than the
progress of the backup as the progress of the backup depends on the
client. Note this quirk in the docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backup job may consist of many backup sub-blockjobs. Add the new
blockjob type and add all type converter strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce virsh commands for performing backup jobs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce VIR_DOMAIN_JOB_OPERATION_BACKUP into virDomainJobOperation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This option can be used to override the destination host name used for
TLS verification.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce --rawstats which prints all statistics fields from the new API
similarly to how the virsh event handler prints them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce the --anystats flag which does not skip the printing of the
stats if the job was unsuccessful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Printing that a job failed is rather unhelpful. Print at least the
operation which failed.
Achieve this by moving the check whether to print stats later but
replace it with a check which will skip printing of the operation if
there's no job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
To simplify the stats printer code we convert the new statistics from
the typed parameter list into the old stats structure.
Extract this code since it takes a lot of space.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Before we rewrote nss plugin so that it doesn't use libvirt's
internal functions it used virLeaseReadCustomLeaseFile() to parse
.status files. After the rewrite it's using read() + yajl_parse()
+ yajl_complete_parse(). There's one catch though,
virLeaseReadCustomLeaseFile() skipped over empty files.
An empty .status file is created when a network is started. This
is because we configure dnsmasq to use our leasehelper. So the
first thing it does it calls it as follows:
DNSMASQ_INTERFACE=virbr0 /usr/libexec/libvirt_leaseshelper init
which causes the leasehelper to create empty virbr0.status file.
If there is only one libvirt network then that is no problem -
there are no other .status files to parse anyway. But if there
are two or more networks then the first empty .status file causes
whole parsing process and subsequently the whole name lookup
process to fail.
Fixes: v5.7.0-rc1~343
Reported-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Getting the hostname of a guest usually requires a in-guest agent,
or generally can be determined only on active domains.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This flag is not implied by g_mkstemp_full, only by g_mkstemp.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Bjoern Walk <bwalk@linux.ibm.com>
Fixes: 4ac4773040
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Glib implementation follows the ISO C99 standard so it's safe to replace
the gnulib implementation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.
This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.
One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').
Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds, this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With g_mkstemp_full, there is no need to distinguish between
mkostemp and mkostemps (no suffix vs. a suffix of a fixed length),
because the GLib function looks for the XXXXXX pattern everywhere
in the string.
Use S_IRUSR | S_IWUSR for the permissions and do not pass O_RDWR
in flags since it's implied.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we use g_strdup everywhere, delete vshStrdup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove all the uses of vshStrdup in favor of GLib's g_strdup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Split the parameters to make changes more readable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Mark the 'str' variable as g_autofree and avoid the need for
a separate cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use 'str' for the allocated copy of the string and 'p'
for the pointer into that string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all uses of VIR_DEFINE_AUTOPTR_FUNC
with G_DEFINE_AUTOPTR_CLEANUP_FUNC in preparation for replacing the
rest.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Also define the macro for building with GLib older than 2.60
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.
The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Replace use of the gnulib base64 module with glib's own base64 API family.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the main glib.h to internal.h so that all common code can use it.
Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.
This was feature was dropped in 2.46.0 with:
commit 3be6ed60aa58095691bd697344765e715a327fc1
Author: Alexander Larsson <alexl@redhat.com>
Date: Sat Jun 27 18:38:42 2015 +0200
Deprecate and drop support for memory vtables
Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in
commit 1f24b36607bf708f037396014b2cdbc08d67b275
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Sep 5 14:37:54 2019 +0100
gmem: clarify that g_malloc always uses the system allocator
Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.
This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.
This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.
Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're using gnulib to get ffs, ffsl, rotl32, count_one_bits,
and count_leading_zeros. Except for rotl32 they can all be
replaced with gcc/clangs builtins. rotl32 is a one-line
trivial function.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
virDomainGetBlockInfo() returns error if called on a disk with no
source (a sourceless disk might be a removable media drive with no
media in it, for instance an empty CDROM or floppy drive).
So far this caused the virsh domblkinfo --all command to abort and
ignore any remaining (not yet displayed) disk devices. This patch
fixes the problem by first checking for existence of a <source>
element in the corresponding XML. If none is found, we avoid calling
virDomainGetBlockInfo() altogether as we know it's bound to fail in
that case.
https://bugzilla.redhat.com/show_bug.cgi?id=1619625
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It is documented that a command to run inside the container can be
passed with the -c arg.
virt-login-shell -c "ls -l /"
This fixes
commit 4feeb2d986
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Aug 1 10:58:31 2019 +0100
tools: split virt-login-shell into two binaries
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a symbol file for either of NSS modules is changed then
subsequent 'make' doesn't regenerate the library, because there
is no implicit dependency between the library and symbols file.
Put an explicit dependency into the Makefile then. Unfortunately,
setting _DEPENDENCIES makes us lose automake's generated
dependencies (see src/Makefile.am:592 for details). But
fortunately, the only dependency we had was _LIBADD variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similarly to gethostbyname3(), the @addr must be freed on return
from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The findLease() function allocates @addr array iff no error
occurred and at least one satisfactory record was found.
Therefore, there is no need to call free() if findLease() failed,
or did not find any records as addr == NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When parsing leases file, appendAddr() is called to append parsed
tuple (address, expiry time, family) into an array. Whilst doing
so, the array is searched for possible duplicate. This is done by
comparing each item of the array by passed @family: if @family is
AF_INET then the item is viewed as IPv4 address. Similarly, if
@family is AF_INET6 then the item is viewed as IPv6 address. This
is not exactly right - the array can contain addresses of both
families and thus the address family of each item of the array
must be considered.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With a nice side-effect of fixing alignment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the command code to use the new type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I opted to alias the 'virDomainType' to 'virshDomain' so that it's
obvious in all cases that this is a virsh-only construct. This is also
somewhat consistent with virsh's use of 'virshDomainFree' wrapper for
the freeing function which actually accepts NULL.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The Perl bindings for libvirt use the test driver for unit tests. This
tries to load the cpu_map/index.xml file, and when run from an
uninstalled build will fail.
The problem is that virFileActivateDirOverride is called by our various
binaries like libvirtd, virsh, but is not called when a 3rd party app
uses libvirt.so
To deal with this we allow the LIBVIRT_DIR_OVERRIDE=1 env variable to be
set and make virInitialize look for this. The 'run' script will set it,
so now build using this script to run against an uninstalled tree we
will correctly resolve files to the source tree.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Apparently a copy/paste error. The net-port-delete help string was in
fact from net-port-dumpxml.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1747826
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The xenapi driver has not seen any development since its initial
contribution 9 years ago. There have been no bug reports, no patches,
and no queries about the driver on the developer or user mailing lists.
Remove the driver from the libvirt sources.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The (pre-copy) bandwidth was historically the only bandwidth we
supported and thus it is called just "bandwidth" in all other places.
E.g., virsh migrate-setspeed or in the migration typed parameter name.
Let's make the new option for virsh migrate consistent.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It appears that all commands were originally fully in alphabetical order
but as new commands were added, they were sometimes inserted out of
order. Fix up all domain commands so that they're in alphabetical order
again.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'guestinfo' command uses the new virDomainGetGuestInfo() API to
query information about the specified domain and print it out for the
user. The output is modeled roughly on the 'domstats' command.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit f15789ec added support for setting postcopy migration bandwidth to
the migrate subcommand. This change does the same for precopy migration.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, whenever there's a regular EOF on the console stream
or an error the virStreamAbort() is called regardless. While this
may not actually break anything, we should call virStreamFinish()
to let the daemon know we've successfully received all the data
and are shutting down the stream gracefully.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Regular VM shutdown triggers the error for existing session of virsh
console and it returns with non-zero exit code:
error: internal error: console stream EOF
The message and status code are misleading because there's no real
error. virStreamRecv returns 0 correctly when EOF is reached.
Existing implementations of esx, fd, and remote streams behave the same
for virStreamFinish and virStreamAbort: they close the stream. So, we
can continue to use virStreamAbort to handle EOF and errors from
virStreamRecv but additonally we can report error if virStreamAbort
fails.
Fixes: 29f2b5248c ("tools: console: pass stream/fd errors to user")
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It may happen that we leave some XATTRs behind. For instance, on
a sudden power loss, the host just shuts down without calling
restore on domain paths. This creates a problem, because when the
host starts up again, the XATTRs are there but they don't reflect
the true state and this may result in libvirt denying start of a
domain.
To solve this, save a unique timestamp (host boot time) among
with our XATTRs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1741140
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This reverts commit f38d553e2d.
Gnulib's make coverage (or init-coverage, build-coverage, gen-coverage)
is not a 1-1 replacement for the original configure option. Our old
--enable-test-coverage seems to be close to gnulib's make build-coverage
except gnulib runs lcov in that phase and the build actually fails for
me even before lcov is run. And since we want to be able to just build
libvirt without running lcov, I suggest reverting to our own
implementation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-By: Eric Blake <eblake@redhat.com>
Substitute in the @sysconfigdir@ value instead of /etc.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If yajl_parse() fails, we try to print an error message. For
that, yajl_get_error() is used. However, its documentation say
that caller is also responsible for freeing the memory it
allocates by using yajl_free_error().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The NSS module has a compile time option which when enabled makes
ERROR() and DEBUG() print messages onto stderr. But now that the
module no longer links with libvirt, we need to include stdio.h
and define NULLSTR().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Due to latest rewrite of NSS module, we are doing yajl parsing
ourselves. This means, we had to introduce couple of callback
that yajl calls. According to its documentation, a callback can
cancel parsing if it returns a zero value. Well, we do just that
in the string callback (findLeasesParserString()). If the JSON
file we are parsing contains a key that we are not interested in,
zero is returned meaning stop all parsing. This is not correct,
because the JSON file can contain some other keys which are not
harmful for our address translation (e.g. 'client-id').
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This completer can be used to complete pool types.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Now that there is no code in virsh-completer.c it doesn't make
much sense to keep those #include-s around. Delete them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
host (e.g. they complete various checkpoint aspects)
into virsh-completer-checkpoint.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
host (e.g. they complete various host aspects)
into virsh-completer-host.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
snapshot (e.g. they complete various snapshot aspects)
into virsh-completer-snapshot.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
secret (e.g. they complete various secret aspects)
into virsh-completer-secret.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
nwfilter (e.g. they complete various nwfilter aspects)
into virsh-completer-nwfilter.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
nodedev (e.g. they complete various nodedev aspects)
into virsh-completer-nodedev.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
networks (e.g. they complete various network aspects)
into virsh-completer-network.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
