The introduction of the v3 migration protocol, along with
support for migration cookies, will significantly expand
the size of the migration code. Move it all to a separate
file to make it more manageable
The functions are not moved 100%. The API entry points
remain in the main QEMU driver, but once the public
virDomainPtr is resolved to the internal virDomainObjPtr,
all following code is moved.
This will allow the new v3 API entry points to call into the
same shared internal migration functions
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
qemuDomainFormatXML helper method
* src/qemu/qemu_driver.c: Remove all migration code
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add
all migration code.
Move the qemudStartVMDaemon and qemudShutdownVMDaemon
methods into a separate file, renaming them to
qemuProcessStart, qemuProcessStop. All helper methods
called by these are also moved & renamed to match
* src/Makefile.am: Add qemu_process.c/.h
* src/qemu/qemu_command.c: Add qemuDomainAssignPCIAddresses
* src/qemu/qemu_command.h: Add VNC port min/max
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
domain event queue helpers
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
all QEMU process startup/shutdown functions
* src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add
all QEMU process startup/shutdown functions
The name convention of device mapper disk is different, and 'parted'
can't be used to delete a device mapper disk partition. e.g.
Name Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1
Error: Expecting a partition number.
This patch introduces 'dmsetup' to fix it.
Changes:
- New function "virIsDevMapperDevice" in "src/utils/utils.c"
- remove "is_dm_device" in "src/storage/parthelper.c", use
"virIsDevMapperDevice" instead.
- Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in"
- Check "dmsetup" in 'configure.ac' for "with-storage-disk"
- Changes on "src/Makefile.am" to link against libdevmapper
- New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms"
Changes from v1 to v3:
- s/virIsDeviceMapperDevice/virIsDevMapperDevice/g
- replace "virRun" with "virCommand"
- sort the list of util functions in "libvirt_private.syms"
- ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration.
e.g.
Name Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1
Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted
Name Path
-----------------------------------------
* configure.ac docs/news.html.in libvirt.spec.in: bump version and add docs
* po/*.po*: updated Gujarati, Polish and Dutch localisations and regenerated
"qemudDomainSaveFlag" goto wrong label "endjob", which will cause
error when security manager trying to restore label (regression).
As it's more reasonable to check if vm is shutoff immediately, and
return right away if it is, remove the checking in "qemudDomainSaveFlag",
and add checking in "qemudDomainSave".
* src/qemu/qemu_driver.c
Libxml2-Logo-90x34.gif was removed from the repository in Sep 2009
(commit d6d528c) because our docs no longer reference it.
* docs/Makefile.am (install-data-local): Don't install missing file.
* src/util/cgroup.c (virCgroupSetValueStr, virCgroupGetValueStr)
(virCgroupRemoveRecursively): VIR_DEBUG can clobber errno.
(virCgroupRemove): Use VIR_DEBUG rather than DEBUG.
The code expected that host CPU architecture matches the architecture on
which libvirt runs. This is normally true but not in tests, where host
CPU is faked to produce consistent results.
Make with_packager and with_packager_version default to "no". This way
--without-packager-version (as shorthand for --with-packager(-version)=no)
works correctly too.
Prior to this patch libvirt outputs a line like this when
--with-packager(-version) was not specified
# ./daemon/libvirtd
14:11:15.018: 31796: info : libvirt version: 0.8.8, package: ()
Now the unspecified parts are correctly omitted.
Reported by Osier Yang.
clang had 5 reports against virCommand; three were false positives
(a NULL deref in ProcessIO solved by sa_assert, and two uninitialized
memory operations solved by adding an initializer), but two were real.
* src/util/command.c (virCommandProcessIO): Fix real bug of
possible NULL dereference. Teach clang that buf is never NULL.
(virCommandRun): Teach clang that infd is only ever accessed when
initialized.
The processWatchdogEvent fix is real, although it can only trigger
on OOM, since bad things happen if doCoreDump is called with a NULL
pathname argument. The other fixes silence clang, but aren't a real
bug because virReportErrorHelper tolerates a NULL format string even
though *printf does not.
* src/qemu/qemu_driver.c (processWatchdogEvent): Exit on OOM.
(qemuDomainIsActive, qemuDomainIsPersistent, qemuDomainIsUpdated):
Provide valid message.
The SCSI storage backend leaks a string containing the pathname
for each block device it discovers
* src/storage/storage_backend_scsi.c: Free the device name
When creating the virDomain::snapshots hash table, virGetDomain
wasn't checking if the creation was successful. This would then
lead to failures in the vir*DomainSnapshot functions. Better to
report this error early and make virGetDomain fail if the
snapshots hash couldn't be created.
* src/datatypes.c: report failure to make a hash table
A couple of allocation were not calling virReportOOMError on allocation
errors
* src/util/hash.c: add the needed call in virHashCreate and
virHashAddOrUpdateEntry
"virStorageBackendCreateVols":
"names->next" serves as condition expression for "do...while",
however, "names" was shifted before, it then results in one less
loop, and thus, one less volume will be created for mpath pool,
the patch is to fix it.
* src/storage/storage_backend_mpath.c
clang complained that STREQ(group->controllers[i].mountPoint,...) was
a NULL dereference when i==VIR_CGROUP_CONTROLLER_CPUSET, because it
assumes the worst about virCgroupPathOfController. Marking the
argument const doesn't yet have an effect, per this clang bug:
http://llvm.org/bugs/show_bug.cgi?id=7758
So, we use sa_assert, which was designed to shut up false positives
from tools like clang.
* src/util/cgroup.c (virCgroupMakeGroup): Teach clang that there
is no NULL dereference.
This patch reorders the connlimit and comment match extensions relative to the state match (-m state); connlimit being most useful if found after a -m state --state NEW and not before it.
When formatting XML for smartcard device with mode=host, libvirt
generates invalid XML if the device has address info associated:
<smartcard mode='host' <address type='ccid' controller='0' slot='1'/>
Commit 9962e406c6 introduced a
problem where if the VM failed to startup, it would not be
correctly cleaned up. Amongst other things the SELinux
security label would not be removed, which prevents the VM
from ever starting again.
The virDomainIsActive() check at the start of qemudShutdownVMDaemon
checks for vm->def->id not being -1. By moving the assignment of the
VM id to the start of qemudStartVMDaemon, we can ensure cleanup will
occur on failure
* src/qemu/qemu_driver.c: Move initialization of 'vm->def->id'
so that qemudShutdownVMDaemon() will process the shutdown
Compilation on mingw was warning about %lld use in fprintf, and
in the gnulib strptime module about dead labels.
* tools/virsh.c (vshPrint): Change redirect.
(vshPrintExtra): Allow use within vshPrint. Avoid fprintf on
arbitrary formats, since we aren't using gnulib module; instead,
use virVasprintf to pre-format.
(vshError): Likewise.
* .gnulib: Update to latest, for mingw strptime warning fix.
Reported by Matthias Bolte.
Introduced by commit fac97c65c distributing cfg.mk, which
previously could blindly assume it was in a git checkout.
* cfg.mk (_update_required): Also check for .git.
* autogen.sh: Don't run bootstrap from a tarball.
Reported by Daniel Veillard.
When attaching a device that already exists, xend driver updates
the device with "device_configure", it causes problems (e.g. for
disk device, 'device_configure' only can be used to update device
like CDROM), on the other hand, we provide additional API
(virDomainUpdateDevice) to update device, this fix is to raise up
errors instead of updating the existed device which is not CDROM
device.
Changes from v1 to v2:
- allow to update CDROM
* src/xen/xend_internal.c
Building the 0.8.8 release candidate on cygwin produced this compiler
warning, which is indicative of catastrophic failure on any attempt to
print an error message with errno turned to a string:
CC strerror_r.lo
strerror_r.c: In function 'rpl_strerror_r':
strerror_r.c:67: warning: assignment makes integer from pointer without a cast
This has been fixed in gnulib.
* .gnulib: Update to latest, for strerror_r fix.
* src/util/memory.c (includes): Satisfy 'make syntax-check'.
Suspending a VM which contains shell meta characters doesn't work with
libvirt-0.8.7:
/var/log/libvirt/qemu/andreas_231-ne\ doch\ nicht.log:
sh: -c: line 0: syntax error near unexpected token `doch'
sh: -c: line 0: `cat | { dd bs=4096 seek=1 if=/dev/null && dd bs=1048576; }
Although target="andreas_231-ne doch nicht" contains shell meta
characters (here: blanks), they are not properly escaped by
src/qemu/qemu_monitor_{json,text}.c#qemuMonitor{JSON,Text}MigrateToFile()
First, the filename needs to be properly escaped for the shell, than
this command line has to be properly escaped for qemu again.
For this to work, remove the old qemuMonitorEscapeArg() wrapper, rename
qemuMonitorEscape() to it removing the handling for shell=TRUE, and
implement a new qemuMonitorEscapeShell() returning strings using single
quotes.
Using double quotes or escaping special shell characters with backslashes
would also be possible, but the set of special characters heavily
depends on the concrete shell (dsh, bash, zsh) and its setting (history
expansion, interactive use, ...)
Signed-off-by: Philipp Hahn <hahn@univention.de>
The logging functions are enhanced so that immediately prior to
the first log message being printed to any output channel, the
libvirt package version will be printed.
eg
$ LIBVIRT_DEBUG=1 virsh
18:13:28.013: 17536: info : libvirt version: 0.8.7
18:13:28.013: 17536: debug : virInitialize:361 : register drivers
...
The 'configure' script gains two new arguments which can be
used as
--with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10"
--with-packager-version="1.fc14"
to allow distros to append a custom string with package specific
data.
The RPM specfile is modified so that it appends the RPM version,
the build host, the build date and the packager name.
eg
$ LIBVIRT_DEBUG=1 virsh
18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10)
18:14:52.086: 17551: debug : virInitialize:361 : register drivers
Thus when distro packagers receive bug reports they can clearly
see what version was in use, even if the bug reporter mistakenly
or intentionally lies about version/builds
* src/util/logging.c: Output version data prior to first log message
* libvirt.spec.in: Include RPM release, date, hostname & packager
* configure.ac: Add --with-packager & --with-packager-version args
QEMUD_CMD_FLAG_PCI_MULTIBUS should be set in the function
qemuCapsExtractVersionInfo()
The flag QEMUD_CMD_FLAG_PCI_MULTIBUS is used in the function
qemuBuildDeviceAddressStr(). All callers get qemuCmdFlags
by the function qemuCapsExtractVersionInfo() except that
testCompareXMLToArgvFiles() in qemuxml2argvtest.c.
So we should set QEMUD_CMD_FLAG_PCI_MULTIBUS in the function
qemuCapsExtractVersionInfo() instead of qemuBuildCommandLine()
because the function qemuBuildCommandLine() does not be called
when we attach a pci device.
tests: set QEMUD_CMD_FLAG_PCI_MULTIBUS in testCompareXMLToArgvFiles()
set QEMUD_CMD_FLAG_PCI_MULTIBUS before calling qemuBuildCommandLine()
as the flags is not set by qemuCapsExtractVersionInfo().
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Win32 doesn't have a concept of signal masks so disable that
code. It is unclear how SIGINT is delivered (if at all) on
Win32, so this might further work to provide an alternative
to pthread_sigmask
* tools/virsh.c: Avoid pthread_sigmask on Win32
Quite a few hosts don't have cgroups mounted and so see warnings
from libvirt logged, which then cause bug reports, etc. Reduce
the log level to INFO so they're not visible by default
* src/qemu/qemu_driver.c: Reduce log level for cgroups
When run non-root the nwfilter driver logs error messages about
being unable to find iptables/ebtables commands (they are in
/sbin which isn't in $PATH). The nwfilter driver can't ever work
as non-root, so simply skip it entirely thus avoiding the error
messages
* src/conf/nwfilter_conf.h, src/nwfilter/nwfilter_driver.c,
src/nwfilter/nwfilter_gentech_driver.c,
src/nwfilter/nwfilter_gentech_driver.h: Pass 'bool privileged'
flag down to final driver impl
* src/nwfilter/nwfilter_ebiptables_driver.c: Skip initialization
if not privileged
A typo s/spice/vnc/ caused parsing of the spice 'auth' data
to write into the wrong part of the struct, blowing away
other unrelated data.
* src/conf/domain_conf.c: s/vnc/spice/ in parsing spice auth