Callers need to know the alias anyways so it does not make much sense to
generate it inside of this function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBuildTLSx509CommandLine has no business guessing which alias should
be used. The alias needs to be passed in.
Note that there's a lingering bad design of this, since the secret
object alias is based on the device name and not on the fact that the
secret is used for decrypting of the TLS private key. If we ever add
authentication for chardevs this will bite us.
Thankfully disk code does not support encrypted private keys for TLS so
it can be happily refactored there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the TLS object alias setup earlier. Also make sure that the alias
is not overwritten on hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For some reason the function returned an error if secAlias was not
passed in. It's not an error, in fact it's desired.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Always parse the 'tls' source field and let the drivers decide whether
they support it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Select protocol using a switch with all cases enumerated. This will
simplify checking unsupported protocols and adding new support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the loop from qemuDomainPrepareDiskSourceTLS and rename it to
qemuDomainPrepareStorageSourceTLS. Currently there is no backing chain
to prepare so fixing one device is equivalent. In the future it will be
reused in a function which will do the looping.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the code into a separate function so that all steps for a
storage protocol are contained and the original function is easily
extendable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using blockdev the approach to base aliases will change. Add a
helper function that will aggregate all code which needs to be called
with the disk alias for the -drive to setup internal data.
qemuDomainSecretDiskPrepare wrapper is no longer necessary as the
contents were moved to a function which is designed to use the old
aliases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the call to the validating function from the function which sets
stuff up.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the function to just prepare data for the disk. Callers need to
do the looping since there's more to do than just copy the data around.
The code path in qemuDomainPrepareDiskSource doesn't need to loop over
the chain yet, since there currently is no chain at this point. This
will be addressed later in the blockdev series where we will setup much
more stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainPrepareDiskSourceChain should set up the disk zero detection
mode only for the top level image. Since it's invoked also for the
middle of the chain we need to check that it's really only the top level
image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When restarting libvirt would previously lose the alias of the x509
certificate object. Upon unplug we would then not delete the
corresponding objects.
Restore the alias if we know it should be there.
Luckily for disks we don't support encrypted TLS environment, so there's
no need to regenerate the 'secret' alias for decryption.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt uses the stored alias to detach the TLS x509 object on disk
unplug. As the alias was not stored, the object would not be detached
if unplugging disks after libvirtd restart.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using 'haveTLS' to do this is pointless if the alias is not set.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we remember the alias we've used to attach the secret objects
we should reuse them rather than trying to infer them from the disk
configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously we did not store the aliases but rather re-generated them
when unplug was necessary. This is very cumbersome since the knowledge
when and which alias to use needs to be stored in the hotplug code as
well.
While this patch will not strictly improve this situation since there
still will be two places containing this code it at least will allow to
remove the mess from the disk-unplug code and will prevent introducing
more mess when adding blockdev support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add tests for upcoming re-generation of aliases for the secret objects
used by qemu when upgrading libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than trying to figure out which alias was used, store it in the
status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to reference the secret objects by name when hot-unplugging
disks. Don't remove the alias so that it does not need to be
recalculated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's desired to keep the alias around to allow referencing of the secret
object used with qemu. Add set of APIs which will destroy all data
except the alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the logic that determines which secret shall be used into the
caller and make this function work only for plain secrets.
This untangles the control flow by only checking relevant data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The encryption secret is setup only for LUKS and thus requires the new
approach. Use qemuDomainSecretInfoNew for initializing it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some code paths can't use the unencrypted secret. Add a helper which
checks and sets up an encrypted secret only and reuse it when setting up
the secret to decrypt the TLS private key in qemuDomainSecretInfoTLSNew.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename it to qemuDomainSecretInfoNewPlain and annotate that it also may
set up a 'plain' secret in some cases. This will eventually be
refactored further.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function checks whether the storage source requires authentication
secret setup. Rename it accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuDomainSecretStorageSourcePrepare in
qemuDomainSecretHostdevPrepare as it uses a virStorageSource to prepare
the authentication secret object data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper checks that the vm has the master key setup and libvirt
supports the given encryption algorithm.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The next patch will forbid the old qcow2 encryption completely. Remove
it from the tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the disk encryption type to qcow2+luks so that the appropriate
secret objects are generated. This tests that the proper alias is used
for the passphrase secret object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The disk encryption part is no way relevant to the rest of the test so
drop it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Alter qemuBuildVsockDevStr to allow passing a prefix for
the vhostfd file descriptor name. Domain startup uses
the numeric value of fd without a prefix, but hotplug
will need to use a prefix because passed file descriptor
names cannot start with a number.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Split out the device string building to allow reuse for hotplug.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 656151bf fixed formatting of the <cmdline> element. Perhaps it
would have been noticed and fixed earlier if we had a test. With this
change, all possible cases of formatting <cmdline> from xmconfig are
covered
1. no 'extra=' or 'root=' in xm.cfg
2. 'extra=' but no 'root=' in xm.cfg
3. 'root=' but no 'extra=' in xm.cfg
4. both 'root=' and 'extra=' in xm.cfg
Case 1 is covered by all existing paravirt tests since they have no
'extra=' or 'root='. Case 2 is covered by adding 'extra=' to a few
of the existing paravirt tests. Cases 3 and 4 are covered by new
tests that only test conversion of xm.cfg to xml.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Per-domain log files were introduced in commit a30b08b717. The FILE
objects associated with these log files are stored in a hash table
using domid as a key. When a domain is shutdown, destroyed, or
otherwise powered-off, the FILE object is removed from the hash table,
where the free function will close the FILE.
Unfortunately the call to remove the FILE from the hash table occurs
after setting domid=-1 in the libxlDomainCleanup() function. The
object is never removed from the hash table, the free function is
never called, and the underlying fd is leaked. Fix by removing the
FILE object from the hash table before setting domid=-1.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
My commit b8b42ca added support for formatting the vsock
command line without actually checking if it's supported.
Add it to the per-device validation function.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This has been broken since commit v4.0.0-165-g93412bb827 which added
jobInfo->statsType enum to distinguish various statistics types. During
migration the type will always be QEMU_DOMAIN_JOB_STATS_TYPE_MIGRATION,
however the destination code consuming the statistics data from
migration cookie failed to properly set the type. So even though
everything was filled in, the type remained *_NONE and any attempt to
fetch the statistics data of a completed migration on the destination
host failed.
https://bugzilla.redhat.com/show_bug.cgi?id=1584071
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
At least since Fedora 26 (maybe earlier, but we don't support older
Fedora releases), the "tc" tool is provided by a separate iproute-tc
package.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To avoid the <source> vs. <target> confusion,
change <source auto='no' cid='3'/> to:
<cid auto='no' address='3'/>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The first feature is SCSI persistent reservation, the other is
support for multihead screenshots.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
