Since 1b4f66e "security: introduce virSecurityManager
(Set|Restore)ChardevLabel" this is a public API of security manager.
Implementing this in apparmor avoids miss any rules that should be
added for devices labeled via these calls.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
virSecurityManagerDomainSetPathLabel is used to make a path known
to the security modules, but today is used interchangably for
- paths to files/dirs to be accessed directly
- paths to a dir, but the access will actually be to files therein
Depending on the security module it is important to know which of
these types it will be.
The argument allowSubtree augments the call to the implementations of
DomainSetPathLabel that can - per security module - decide if extra
actions shall be taken.
For now dac/selinux handle this as before, but apparmor will make
use of it to add a wildcard to the path that was passed.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This came up in discussions around huge pages, but it will cover
more per guest paths that should be added to the guests apparmor profile:
- keys via qemuDomainWriteMasterKeyFile
- per domain dirs via qemuProcessMakeDir
- memory backing paths via qemuProcessBuildDestroyMemoryPathsImpl
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Required to generate correct profiles when using usb passthrough.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/565691
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Jamie Strandboge <jamie@ubuntu.com>
Acked-by: Intrigeri <intrigeri@boum.org>
While libvirtd might do so, qemu itself as a guest will not need
to call qemu-nbd so remove it from the profile.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Adding the PKI path that is used as default suggestion in src/qemu/qemu.conf
If people use non-default paths they should use local overrides but the
suggested defaults we should open up.
This is the default path as referenced by src/qemu/qemu.conf in libvirt.
While doing so merge the several places we have to cover PKI access into
one.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1690140
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Allows (multi-arch enabled) access to libraries under the
/usr/lib/@{multiarch}/qemu/*.so path in the Debian/Ubuntu
qemu-block-extra package and all such libs for the paths
of rpm qemu-block-* packages.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1554761
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Prevent denial messages related to attempted reads on lttng
files from spamming the logs.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1432644
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1527740
Users might use a block device as UEFI VAR store. Or even have
OVMF stored there. Therefore, when starting a domain and separate
mount namespace is used, we have to create all the /dev entries
that are configured for the domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit id '162efa1a' added support hotplug a redirdev, but
did not add the hot unplug. This patch will add that support
to allow usage of the detach-device --live on the device.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Some ARM platforms, such as the original Raspberry Pi, report the
CPU frequency in the BogoMIPS field of /proc/cpuinfo, so libvirt
parsed that field and returned it through its API.
However, not only many more boards don't report any value there,
but several - including ARMv8-based server hardware, and even the
more recent Raspberry Pi 3 - use this field as originally intended:
to report the BogoMIPS value instead of the CPU frequency.
Since we have no way of detecting how the field is being used,
it's better to report no information at all rather than something
ludicrous like "your shiny 96-core aarch64 virtualization host's
CPUs are running at a whopping 100 MHz".
Partially-resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1206353
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Make the parser both more strict, by not ignoring errors reported
by virStrToLong_ui(), and more permissive, by not failing due to
unrelated fields which just happen to have a know prefix and
accepting any amount of whitespace before the numeric value.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Instead of a generic "your architecture", print the actual
architecture name.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
All different architectures use the same copy-pasted code to parse
processor frequency information from /proc/cpuinfo. Let's extract that
code into a function to avoid repetition.
We now also tolerate if the parsing of /proc/cpuinfo is not successful
and just report a warning instead of bailing out and abandoning the rest
of the CPU information.
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1528502
So imagine you have /dev/blah symlink which points to /dev/sda.
You attach /dev/blah as disk to your domain. Libvirt correctly
creates the /dev/blah -> /dev/sda symlink in the qemu namespace.
However, then you detach the disk, change the symlink so that it
points to /dev/sdb and tries to attach the disk again. This time,
however, the attach fails (well, qemu attaches wrong disk)
because the code assumes that symlinks don't change. Well they
do.
This is inspired by test fix written by Eduardo Habkost.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When the -machine pseries,max-cpu-compat=X is supported use
machine parameter instead of -cpu host,compat=X parameter as
that is deprecated now with qemu >= v2.10.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1519146
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Since we have user aliases it may happen that users want to
change it using 'update-device'. Instead of ignoring it silently,
error out loudly. Note that we don't limit the check just for
"ua-" prefixes because users might try to change libvirt
generated aliases too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The qemuMonitorJSONMakeCommand can properly handle a NULL string
by using the "S:" parameter instead of "s:", so let's use that
of having in if/else condition that only adds the "s:".
A microcode update can cause the CPUID bits to change; an example
from the past was the update that disabled TSX on several Haswell
and Broadwell machines.
Therefore, place microcode version in the virQEMUCaps struct and
XML, and rebuild the cache if the versions do not match.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A microcode update can cause the CPUID bits to change; an example
from the past was the update that disabled TSX on several Haswell and
Broadwell machines.
In order to track the x86 microcode version in the QEMU capabilities,
we have to fetch it and store it in the host CPU. This also makes the
version visible in "virsh capabilities", which is a nice side effect.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function will be used to initialize internal data of the x86 CPU
driver (including the CPU map).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This new API reads host's CPU microcode version from /proc/cpuinfo.
Unfortunately, there is no other way of reading microcode version which
would be usable from both system and session daemon.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1519130
Commit id 'dc692438' reverted the automagic addition of a SCSI
controller attempt during virDomainHostdevAssignAddress; however,
the logic to determine where to place the next_unit depended upon
the "new" controller being added. Without the new controller the
the next time through the call for the next SCSI hostdev found
would result in the "next_unit" never changing from 0 (zero) and
as a result the addition of the device will fail due to being a
duplicate unit number of the first with the error message:
virDomainDefCheckDuplicateDriveAddresses:$line : unsupported
configuration: SCSI host address controller='0' bus='1'
target='0' unit='0' in use by another SCSI host device
So instead of walking the controller list looking for SCSI
controllers, all we can do is "pretend" that they exist and
allow other code to create them later as necessary.
In virDomainDefMaybeAddHostdevSCSIcontroller when we add a new
controller because someone neglected to add one or we're adding
one because the existing one is full, we should copy over the
model number from the existing controller since whatever we
create should at least have the same characteristics as the one
we cannot use because it's full.
NB: This affects the existing hostdev-scsi-autogen-address test
which would add a default ('lsi') SCSI controller for the various
scsi_host's that would create a controller for the hostdev.
When qemuDomainFindOrCreateSCSIDiskController adds a controller,
let's use the same model as a currently found controller under the
assumption that the reason to add the controller in hotplug is
because virDomainHostdevAssignAddress determined that there were
too many devices on the existing controller, but only assigned a
new controller index and did not add a new controller and we
desire to use the same controller model as any existing controller
and not take a chance that qemuDomainSetSCSIControllerModel would
use a default that may be incompatible.
Let's move the udevEnumerateDevices into a thread to "speed
up" the initialization process. If the enumeration fails we
can set the Quit flag to ensure that udevEventHandleCallback
will not run.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Replace virNetServerClientNeedAuth with
virNetServerClientIsAuthenticated because it makes it clearer what it
means.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
'Squash' virNetServerClientNeedAuthLocked into
virNetServerClientNeedAuth and remove virNetServerClientNeedAuthLocked
as it's not longer needed.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Enable testing for 'auth_pending' in the virnetdaemon test case.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There is a race between virNetServerProcessClients (main thread) and
remoteDispatchAuthList/remoteDispatchAuthPolkit/remoteSASLFinish (worker
thread) that can lead to decrementing srv->nclients_unauth when it's
zero. Since virNetServerCheckLimits relies on the value
srv->nclients_unauth the underrun causes libvirtd to stop accepting
new connections forever.
Example race scenario (assuming libvirtd is using policykit and the
client is privileged):
1. The client calls the RPC remoteDispatchAuthList =>
remoteDispatchAuthList is executed on a worker thread (Thread
T1). We're assuming now the execution stops for some time before
the line 'virNetServerClientSetAuth(client, 0)'
2. The client closes the connection irregularly. This causes the
event loop to wake up and virNetServerProcessClient to be
called (on the main thread T0). During the
virNetServerProcessClients the srv lock is hold. The condition
virNetServerClientNeedAuth(client) will be checked and as the
authentication is not finished right now
virNetServerTrackCompletedAuthLocked(srv) will be called =>
--srv->nclients_unauth => 0
3. The Thread T1 continues, marks the client as authenticated, and
calls virNetServerTrackCompletedAuthLocked(srv) =>
--srv->nclients_unauth => --0 => wrap around as nclient_unauth is
unsigned
4. virNetServerCheckLimits(srv) will disable the services forever
To fix it, add an auth_pending field to the client struct so that it
is now possible to determine if the authentication process has already
been handled for this client.
Setting the authentication method to none for the client in
virNetServerProcessClients is not a proper way to indicate that the
counter has been decremented, as this would imply that the client is
authenticated.
Additionally, adjust the existing test cases for this new field.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Combine virNetServerClientSetAuth(client,
VIR_NET_SERVER_SERVICE_AUTH_NONE) and virNetServerTrackCompletedAuth
into one new function named virNetServerSetClientAuthenticated.
After using this new function the function
virNetServerTrackCompletedAuth was superfluous and is therefore
removed. In addition, it is not very common that a
'{{function}}' (virNetServerTrackCompletedAuth) does more than just
the locking compared to
'{{function}}Locked' (virNetServerTrackCompletedAuthLocked).
virNetServerTrackPendingAuth was already superfluous and therefore
it's also removed.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The lock for @client must not only be held for the duration of
checking whether the client wants to close, but also for as long as
we're closing the client. The same applies to the tracking of
authentications.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Add virNetServerClientAuthMethodImpliesAuthenticated() for deciding
whether a authentication method implies that a client is automatically
authenticated or not. Use this new function in
virNetServerClientNeedAuthLocked().
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
This makes the code more efficient.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Be more precise in which cases the authentication is needed and
introduce *Locked.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add typedef for the anonymous enum used for the authentication methods
and remove the default case. This allows the usage of the type in a
switch statement and taking advantage of the compilers feature to
detect uncovered cases.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Direct leak of 104 byte(s) in 1 object(s) allocated from:
#0 0x7f904bfbe12b (/lib64/liblsan.so.0+0xe12b)
#1 0x7f904ba0ad67 in virAlloc ../../src/util/viralloc.c:144
#2 0x7f904bbc11a4 in virNetMessageNew ../../src/rpc/virnetmessage.c:42
#3 0x7f904bbb8e77 in virNetServerClientNewInternal ../../src/rpc/virnetserverclient.c:392
#4 0x7f904bbb9921 in virNetServerClientNew ../../src/rpc/virnetserverclient.c:440
#5 0x402ce5 in testIdentity ../../tests/virnetserverclienttest.c:55
#6 0x403bed in virTestRun ../../tests/testutils.c:180
#7 0x402c1e in mymain ../../tests/virnetserverclienttest.c:146
#8 0x404c80 in virTestMain ../../tests/testutils.c:1119
#9 0x4030d5 in main ../../tests/virnetserverclienttest.c:152
#10 0x7f9047f7f889 in __libc_start_main (/lib64/libc.so.6+0x20889)
Indirect leak of 4 byte(s) in 1 object(s) allocated from:
#0 0x7f904bfbe12b (/lib64/liblsan.so.0+0xe12b)
#1 0x7f904ba0adc7 in virAllocN ../../src/util/viralloc.c:191
#2 0x7f904bbb8ec7 in virNetServerClientNewInternal ../../src/rpc/virnetserverclient.c:395
#3 0x7f904bbb9921 in virNetServerClientNew ../../src/rpc/virnetserverclient.c:440
#4 0x402ce5 in testIdentity ../../tests/virnetserverclienttest.c:55
#5 0x403bed in virTestRun ../../tests/testutils.c:180
#6 0x402c1e in mymain ../../tests/virnetserverclienttest.c:146
#7 0x404c80 in virTestMain ../../tests/testutils.c:1119
#8 0x4030d5 in main ../../tests/virnetserverclienttest.c:152
#9 0x7f9047f7f889 in __libc_start_main (/lib64/libc.so.6+0x20889)
SUMMARY: LeakSanitizer: 108 byte(s) leaked in 2 allocation(s).
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
