Our RPC calls can be divided into two groups: regular and high
priority. The latter can be then processed by so called high
priority worker threads. This is our way of defeating a
'deadlock' and allowing some RPCs to be processed even when all
(regular) worker threads are stuck. For instance: if all regular
worker threads get stuck when talking to QEMU on monitor, the
virDomainDestroy() can be processed by a high priority worker
thread(s) and thus unstuck those threads.
Now, this is all fine, except if users want to use virsh
non interactively:
virsh destroy $dom
This does a bit more - it needs to open a connection. And that
consists of multiple RPC calls: AUTH_LIST,
CONNECT_SUPPORTS_FEATURE, CONNECT_OPEN, and finally
CONNECT_REGISTER_CLOSE_CALLBACK. All of them are marked as high
priority except the last one. Therefore, virsh just sits there
with a partially open connection.
There's one requirement for high priority calls though: they can
not get stuck. Hopefully, the reason is obvious by now. And
looking into the server side implementation the
CONNECT_REGISTER_CLOSE_CALLBACK processing can't ever get stuck.
The only driver that implements the callback for public API is
Parallels (vz). And that can't block really.
And for virConnectUnregisterCloseCallback() it's the same story.
Therefore, both can be marked as high priority.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2143840
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use same style in the 'struct option' as:
struct option opt[] = {
{ a, b },
{ a, b },
...
{ a, b },
};
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libvirt-guests has After= dependency for all the sockets and that is enough.
With the extra Before= in the service file systemd postpones the start of the
socket activated service (when libvirt-guests is trying to connect to the
socket) until after libvirt-guests is stopped effectively making `systemctl stop
libvirt-guests` deadlock. The reason for that is that all stop jobs are
scheduled before any start job. Removing the redundant Before= specification
fixes this behaviour.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For prevent memory leak and easier to use, So change
virDomainEventTunableNew to get virTypedParameterPtr *params
and set it = NULL.
Signed-off-by: lu zhipeng <luzhipeng@cestc.cn>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When a hypervisor driver is not compiled in and a user enables the
monolithic libvirtd, they get the following misleading error:
$ virsh -c qemu:///system
error: failed to connect to the hypervisor
error: Failed to connect socket to '/var/run/libvirt/virtqemud-sock': No such file or directory
The issue is that the daemon side of the remote driver can't find the
appropriate driver, but the remote driver always accepts everything and
thus attempts to delegate further, which in case of libvirtd makes no
sense.
Refuse opening a connection for local URIS even when the requested
driver is not registered in case when we are inside 'libvirtd' as
libvirtd doesn't have anything to delegate to.
$ virsh -c qemu:///system
error: failed to connect to the hypervisor
error: no connection driver available for qemu:///system
Discovered when investigating https://gitlab.com/libvirt/libvirt/-/issues/370
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patch which is fixing the opening of drivers in monolithic mode
needs to know whether we are inside 'libvirtd' but the code where the
decision needs to happen is not re-compiled per daemon. Thus we need to
pass this information to the stateful driver init function so that it
can be remebered.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for 'driver' and return error right away to
avoid the 'cleanup' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virConnectOpenAuth provides an unified interface with using 'flags' to
select the proper mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At time of this patch struct 'virDomainDef' has 1736 bytes. Allocate it
dynamically to keep the stack frame size in reasonable values.
This patch also fixes remoteRelayDomainQemuMonitorEventCheckACL, where
we didn't clear the stack'd variable prior to use. Fortunately for now
the code didn't look at anything else than what the code overwrote.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Function daemonConfigFilePath() will assign a path to
remote_config_file definitely and the path will be validated
in following codes. So, it's unnecessary to return value
from daemonConfigFilePath() and check the returned value.
Signed-off-by: jiangjiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
These wrapper functions were used to adapt the virObjectUnref() function
signature for different callbacks. But in commit 0d184072, the
virObjectUnref() function was changed to return a void instead of a
bool, so these adapters are no longer necessary.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
'virtproxyd' doesn't have the '--listen' parameter and it's enough just
to enable the corresponding option in the config.
The config file is generic for all the daemons and we just omit/adjust
some sections. Adding a separate mechanism to omit the note about the
'--listen' parameter would be overkill so mention explicitly that it's
required only for libvirtd and not virtproxyd.
The section is omitted for other daemons.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2094641
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Modify the code so that calling 'virNetDaemonAutoShutdown' will update
the auto shutdown timeout also for running daemons.
This involves changing the logic when to do the update of the timer so
that it can be called from both when the daemon is not yet runnign and
when doing a live update.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The original virDomainAbortJob did not support flags.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When a SIGHUP is received a thread is spawned that runs
virStateReload(). However, if SIGINT is received while the former
thread is still running then we may get into problematic
situation: the cleanup code in main() sees drivers initialized
and thus calls virStateCleanup(). So now we have two threads, one
running virStateReload() the other virStateCleanup(). In this
situation it's very likely that a race condition occurs and
either of threads causes SIGSEGV.
To fix this, unmark drivers as initialized in the
virStateReload() thread for the time the function runs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2075837
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The remoteOpenConn() function was refactored recently. As a part
of that new variable @newconn was introduced which holds
virConnect object as it's being gradually constructed throughout
the function. At the very end, when everything succeeded the
variable is stolen into passed @conn. However, there was one
line missed in the refactor which still access the @conn instead
of @newconn leading to a NULL dereference.
Fixes: f7c422993e4c7ca3e58b1d0d69f4772851af399f
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use a temporary variable 'newconn' to hold the newly opened connection
until we are ready to pass it back instead of the original connection.
This way we can avoid complicated 'error'/'cleanup' sections.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Refactor the code to use virTypedParamList which simplifies cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Instead of creating an empty object and then setting keys one
at a time, it is possible to pass a dict object to
configuration_data(). This is nicer because it doesn't require
repeating the name of the cfg_data object over and over.
There is one exception: the 'conf' object, where we store values
that are used directly by C code. In that case, using a dict
object is not feasible for two reasons: first of all, replacing
the set_quoted() calls would result in awkward code with a lot
of calls to format(); moreover, since code that modifies it is
sprinkled all over the place, refactoring it would probably
make things more complicated rather than simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Switch the operands in the loop condition to make it converge.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This API has the same semantics as 'virDomainQemuMonitorCommand' but
accepts file descriptors which are then forwarded to qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The systemd version in RHEL-7 lacked support for the LISTEN_FDNAMES env
variable with socket activation. Since we stopped targetting RHEL-7 we
can drop some considerable amount of compatibility code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Adding an exception for the whole file usually defeats the purpose of a
syntax check and is also likely to get forgotten once the file is
removed.
In case of the suggestion of using 'safewrite' instead of write even the
comment for safewrite states that the function needs to be used only in
certain cases.
Remove the blanket exceptions for files and use an exclude string
instead. The only instance where we keep the full file exception is for
src/libvirt-stream.c as there are multiple uses in example code in
comments where I couldn't find a nicer targetted wapproach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This change was generated using the following spatch:
@ rule1 @
expression a;
identifier f;
@@
<...
- f(*a);
... when != a;
- *a = NULL;
+ g_clear_pointer(a, f);
...>
@ rule2 @
expression a;
identifier f;
@@
<...
- f(a);
... when != a;
- a = NULL;
+ g_clear_pointer(&a, f);
...>
Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We recently started listing these in the spec file and, since we
were not creating them during the installation phase, that broke
RPM builds.
Fixes: 4b43da0bff9b78dcf1189388d4c89e524238b41d
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The service files were copied out of the service file for libvirtd and
the name of the corresponding manpage was not fixed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2045959
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The existence of the unix socket path is used by the remote driver to
determine whether modular daemons are in use, so if the socket file
stays behind and the user decided to switch from modular to monolithic
daemon which was socket activated, the remote driver will insist on
picking '/var/run/libvirt/virtqemud-sock', even when it's no longer in
use:
# systemctl start libvirtd.service
# virsh list
Id Name State
--------------------
# systemctl stop libvirtd.service
Warning: Stopping libvirtd.service, but it can still be activated by:
libvirtd.socket
libvirtd-ro.socket
libvirtd-admin.socket
# systemctl start virtqemud.socket
# virsh list
Id Name State
--------------------
# systemctl stop virtqemud.socket
# systemctl start libvirtd.service
# virsh list
error: failed to connect to the hypervisor
error: Failed to connect socket to '/var/run/libvirt/virtqemud-sock': Connection refused
# virsh -c 'qemu:///system?socket=/var/run/libvirt/libvirt-sock' list
Id Name State
--------------------
Fix this by instructing systemd to delete the socket file when
deactivating the unit file for the socket.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.
Remove the sysconfig file and place the current desired default into
the service file.
Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf
Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There is no need to do that since both fallible functions do that already.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
And make callers check the return value as well. This helps error out early for
invalid environment variables.
That is desirable because it could lead to deadlocks. This can happen when
resetting logging after fork() reports translated errors because gettext
functions are not reentrant. Well, it is not limited to resetting logging after
fork(), it can be any translation at that phase, but parsing environment
variables is easy to make fail on purpose to show the result, it can also happen
just due to a typo.
Before this commit it is possible to deadlock the daemon on startup
with something like:
LIBVIRT_LOG_FILTERS='1:*' LIBVIRT_LOG_OUTPUTS=1:stdout libvirtd
where filters are used to enable more logging and hence make the race less rare
and outputs are set to invalid
Combined with the previous patches this changes
the following from:
...
<deadlock>
to:
...
libvirtd: initialisation failed
The error message is improved in future commits and is also possible thanks to
this patch.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This prevents starting any daemons with improper logging settings. This is
desirable on its own, but will be even more beneficial when more functions start
reporting errors and failing on them, coming up in following patches
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When using the monolithic daemon the driver for virStream is
always virFDStreamDrv and thus calling virStreamInData() results
in calling virFDStreamInData().
But things are different with split daemon, especially when a
client connects to one of hypervisor daemons (e.g. virtqemud) and
then lets the daemon connect to the storage daemon for
vol-upload/vol-download. Here, the hypervisor daemon acts like
both client and server. This is reflected by stream->driver
pointing to remoteStreamDrv, which doesn't have streamInData
callback implemented and thus vol-upload/vol-download with sparse
flag fails.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2026537
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So far, virStreamInData() is effectively a wrapper over
virFDStreamInData() which means it deals with files which can be
rewound (lseek()-ed) to whatever position we need. And in fact,
that's what virFDStreamInData() does - it makes sure that the FD
is left unchanged in terms of position in the file. Skipping the
hole happens soon after - in daemonStreamHandleRead() when
virStreamSendHole() is called.
But this is about to change. Soon we will have another implementation
where we won't be dealing with FDs but virNetMessage queue and it will
be handy to pop message at the beginning of the queue. Implement and
document this new behavior.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Specifically:
* include non-option argument 'URI' in usage summary;
* mention that it's an internal tool not meant to be
called directly;
* exit earlier if required arguments are absent.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a getopt interface and we're not using getopt, at least
directly, so even though it works relying on it feels wrong.
GOption takes care of removing any trace of the arguments it
consumes from argc and argv, leaving behind only non-option
arguments, so we can just use those standard variables.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to make sure the URI scheme is present before passing
it to strchr(), otherwise we're going to get
$ virt-ssh-helper foo
Segmentation fault (core dumped)
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The initialization of drivers happens in a separate thread.
However, the main thread continues initialization and sets
shutdown callbacks (virStateShutdownPrepare() and
virStateShutdownWait()) even though the driver init thread is
still running. This is dangerous because if the daemon decides to
quit early (e.g. because SIGINT was delivered) the
shutdownPrepare and shutdownWait callback are called over
partially init drivers.
Set callbacks only after all drivers were initialized.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/218
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2027400
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To make it easier for users to figure out how the DN should be formatted.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This removes a dead link, the need for users to understand a glib function and a
improper reference to fnmatch (as we only expand asterisks to any string).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are a few cases where a string list is freed by an explicit
call of g_strfreev(), but the same result can be achieved by
g_atuo(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
