* virPCIDeviceFindByIDs - find a device on a list w/o creating an object
This makes searching for an existing device on a list lighter weight.
* virPCIDeviceCopy - make a copy of an existing virPCIDevice object.
* virPCIDeviceGetDriverPathAndName - construct new strings containing
1) the name of the driver bound to this device.
2) the full path to the sysfs config for that driver.
(This code was lifted from virPCIDeviceUnbindFromStub, and replaced
there with a call to this new function).
Previously stubDriver was always set from a string literal, so it was
okay to use a const char * that wasn't freed when the virPCIDevice was
freed. This will not be the case in the near future, so it is now a
char* that is allocated in virPCIDeviceSetStubDriver() and freed
during virPCIDeviceFree().
libxl supports the LIBXL_DISK_BACKEND_QDISK disk backend, where qemu
is used to provide the disk backend. This patch simply maps the
existing <driver name='qemu'/> to LIBXL_DISK_BACKEND_QDISK.
Specifying an unsupported disk format with the tap driver resulted in
a less than helpful error message
error: Failed to start domain test-hvm
error: internal error libxenlight does not support disk driver qed
Change the message to state that the qed format is not supported by
the tap driver, e.g.
error: Failed to start domain test-hvm
error: internal error libxenlight does not support disk format qed
with disk driver tap
While at it, check for unsupported formats in the other driver
backends.
Add a script which parses the driver API code and validates
that every API registered in a virNNNDriverPtr table contains
an ACL check matching the API name.
NB this currently whitelists a few xen driver functions
which are temporarily lacking in access control checks.
The xen driver is considered insecure until these are
fixed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the 'gendispatch.pl' script to be able to generate
three new types of file.
- 'aclheader' - defines signatures of helper APIs for
doing authorization checks. There is one helper API
for each API requiring an auth check. Any @acl
annotations result in a method being generated with
a suffix of 'EnsureACL'. If the ACL check requires
examination of flags, an extra 'flags' param will be
present. Some examples
extern int virConnectBaselineCPUEnsureACL(void);
extern int virConnectDomainEventDeregisterEnsureACL(virDomainDefPtr domain);
extern int virDomainAttachDeviceFlagsEnsureACL(virDomainDefPtr domain, unsigned int flags);
Any @aclfilter annotations resuilt in a method being
generated with a suffix of 'CheckACL'.
extern int virConnectListAllDomainsCheckACL(virDomainDefPtr domain);
These are used for filtering individual objects from APIs
which return a list of objects
- 'aclbody' - defines the actual implementation of the
methods described above. This calls into the access
manager APIs. A complex example:
/* Returns: -1 on error (denied==error), 0 on allowed */
int virDomainAttachDeviceFlagsEnsureACL(virConnectPtr conn,
virDomainDefPtr domain,
unsigned int flags)
{
virAccessManagerPtr mgr;
int rv;
if (!(mgr = virAccessManagerGetDefault()))
return -1;
if ((rv = virAccessManagerCheckDomain(mgr,
conn->driver->name,
domain,
VIR_ACCESS_PERM_DOMAIN_WRITE)) <= 0) {
virObjectUnref(mgr);
if (rv == 0)
virReportError(VIR_ERR_ACCESS_DENIED, NULL);
return -1;
}
if (((flags & (VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE)) == 0) &&
(rv = virAccessManagerCheckDomain(mgr,
conn->driver->name,
domain,
VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) {
virObjectUnref(mgr);
if (rv == 0)
virReportError(VIR_ERR_ACCESS_DENIED, NULL);
return -1;
}
if (((flags & (VIR_DOMAIN_AFFECT_CONFIG)) == (VIR_DOMAIN_AFFECT_CONFIG)) &&
(rv = virAccessManagerCheckDomain(mgr,
conn->driver->name,
domain,
VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) {
virObjectUnref(mgr);
if (rv == 0)
virReportError(VIR_ERR_ACCESS_DENIED, NULL);
return -1;
}
virObjectUnref(mgr);
return 0;
}
- 'aclsyms' - generates a linker script to export the
APIs to drivers. Some examples
virConnectBaselineCPUEnsureACL;
virConnectCompareCPUEnsureACL;
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce annotations to all RPC messages to declare what
access control checks are required. There are two new
annotations defined:
@acl: <object>:<permission>
@acl: <object>:<permission>:<flagname>
Declare the access control requirements for the API. May be repeated
multiple times, if multiple rules are required.
<object> is one of 'connect', 'domain', 'network', 'storagepool',
'interface', 'nodedev', 'secret'.
<permission> is one of the permissions in access/viraccessperm.h
<flagname> indicates the rule only applies if the named flag
is set in the API call
@aclfilter: <object>:<permission>
Declare an access control filter that will be applied to a list
of objects being returned by an API. This allows the returned
list to be filtered to only show those the user has permissions
against
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an access control driver that uses the pkcheck command
to check authorization requests. This is fairly inefficient,
particularly for cases where an API returns a list of objects
and needs to check permission for each object.
It would be desirable to use the polkit API but this links
to glib with abort-on-OOM behaviour, so can't be used. The
other alternative is to speak to dbus directly
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new 'access_drivers' config parameter to the libvirtd.conf
configuration file. This allows admins to setup the default
access control drivers to use for API authorization. The same
driver is to be used by all internal drivers & APIs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The access control checks in the 'connectOpen' driver method
will require 'conn->driver' to be non-NULL. Set this before
running the 'connectOpen' method and NULL-ify it again on
failure.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch introduces the virAccessManagerPtr class as the
interface between virtualization drivers and the access
control drivers. The viraccessperm.h file defines the
various permissions that will be used for each type of object
libvirt manages
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It's not used anywhere except for the switch in
virStorageBackendCreateQemuImgOpts, where leaving it in causes
a dead code coverity warning and omitting it breaks compilation
because of unhandled enum value.
Introduced by 6298f74.
libxl contains logic to determine an appropriate devid for new devices
that do not specify one in their configuration. For all device types
except NICs, the libxl driver allows libxl to determine devid. Do the
same for NICs.
Add <features> and <compat> elements to volume target XML.
<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.
<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
Detect qcow2 images with version 3 in the image header as
VIR_STORAGE_FILE_QCOW2.
These images have a feature bitfield, with just one feature supported
so far: lazy_refcounts.
The header length changed too, moving the location of the backing
format name.
Add new CPU features for HyperV:
vapic for virtual APIC support
spinlocks for setting spinlock support
<features>
<hyperv>
<vapic state='on'/>
<spinlocks state='on' retries='4096'/>
</hyperv>
</features>
https://bugzilla.redhat.com/show_bug.cgi?id=784836
Commit 752596b5 broke the build with -Werror
qemu/qemu_hotplug.c: In function 'qemuDomainChangeGraphics':
qemu/qemu_hotplug.c:1980:39: error: declaration of 'listen' shadows a
global declaration [-Werror=shadow]
Fix with s/listen/newlisten/
This fixes the problem reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=972690
When checking for a collision of a new libvirt network's subnet with
any existing routes, we read all of /proc/net/route into memory, then
parse all the entries. The function that we use to read this file
requires a "maximum length" parameter, which had previously been set
to 64*1024. As each line in /proc/net/route is 128 bytes, this would
allow for a maximum of 512 entries in the routing table.
This patch increases that number to 128 * 100000, which allows for
100,000 routing table entries. This means that it's possible that 12MB
would be allocated, but that would only happen if there really were
100,000 route table entries on the system, it's only held for a very
short time.
Since there is no method of specifying and unlimited max (and that
would create a potential denial of service anyway) hopefully this
limit is large enough to accomodate everyone.
Currently, we have a bug when updating a graphics device. A graphics device can
have a listen address set. This address is either defined by user (in which case
it's type is VIR_DOMAIN_GRAPHICS_LISTEN_TYPE_ADDRESS) or it can be inherited
from a network (in which case it's type is
VIR_DOMAIN_GRAPHICS_LISTEN_TYPE_NETWORK). However, in both cases we have a
listen address to process (e.g. during migration, as I've tried to fix in
7f15ebc7).
Later, when a user tries to update the graphics device (e.g. set a password),
we check if listen addresses match the original as qemu doesn't know how to
change listen address yet. Hence, users are required to not change the listen
address. The implementation then just dumps listen addresses and compare them.
Previously, while dumping the listen addresses, NULL was returned for NETWORK.
After my patch, this is no longer true, and we get a listen address for olddev
even if it is a type of NETWORK. So we have a real string on one side, the NULL
from user's XML on the other side and hence we think user wants to change the
listen address and we refuse it.
Therefore, we must take the type of listen address into account as well.
Do not leave uninitialized variables, not all parameters are set in
libxlMake*.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
libxl uses some xenstore entries for hints in memory management
(especially when starting new domain). This includes dom0 memory limit
and Xen free memory margin, based on current system state. Entries are
created at first function usage, so force such call at daemon startup,
which most likely will be before any domain startup.
Also prevent automatic memory management if dom0_mem= option passed to
xen hypervisor - it is known to be incompatible with autoballoon.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
As a consequence of the cgroup layout changes from commit 'cfed9ad4', the
lxcDomainGetSchedulerParameters[Flags]()' and lxcGetSchedulerType() APIs
failed to return data for a non running domain. This can be seen through
a 'virsh schedinfo <domain>' command which returns:
Scheduler : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted
Prior to that change a non running domain would return:
Scheduler : posix
cpu_shares : 0
vcpu_period : 0
vcpu_quota : 0
emulator_period: 0
emulator_quota : 0
This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.
As a consequence of the cgroup layout changes from commit '632f78ca', the
qemuDomainGetSchedulerParameters[Flags]()' and qemuGetSchedulerType() APIs
failed to return data for a non running domain. This can be seen through
a 'virsh schedinfo <domain>' command which returns:
Scheduler : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted
Prior to that change a non running domain would return:
Scheduler : posix
cpu_shares : 0
vcpu_period : 0
vcpu_quota : 0
emulator_period: 0
emulator_quota : 0
This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.
Just to reduce the indentation levels. Remove the unneeded
NULL check for disk->file, as virBufferEscapeString doesn't
print anything with NULL arguments.
