A cleanup function can be declared for virFDStreamMsg type so
that the structure doesn't have to be freed explicitly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All callers of virFDStreamMsgQueuePush() have the same pattern:
they explicitly set @msg passed to NULL to avoid freeing it later
on. Well, the function can take address of the pointer and clear
it for them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The buffer that allocated in the virFDStreamThreadDoRead() can be
automatically freed, or if saved into the message structure it
can be stolen.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
So far, only ENOENT is ignored (to deal with kernels without
devmapper). However, as reported on the list, under certain
scenarios a different error can occur. For instance, when libvirt
is running inside a container which doesn't have permissions to
talk to the devmapper. If this is the case, then open() returns
-1 and sets errno=EPERM.
Assuming that multipath devices are fairly narrow use case and
using them in a restricted container is even more narrow the best
fix seems to be to ignore all open errors BUT produce a warning
on failure. To avoid flooding logs with warnings on kernels
without devmapper the level is reduced to a plain debug message.
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When adding support for HMAT, in f0611fe883 I've introduced a
check which aims to validate /domain/cpu/numa/interconnects. As a
part of that, there is a loop which checks whether all <latency/>
with @cache attribute refer to an existing cache level. For
instance:
<cpu mode='host-model' check='partial'>
<numa>
<cell id='0' cpus='0-5' memory='512000' unit='KiB' discard='yes'>
<cache level='1' associativity='direct' policy='writeback'>
<size value='8' unit='KiB'/>
<line value='5' unit='B'/>
</cache>
</cell>
<interconnects>
<latency initiator='0' target='0' cache='1' type='access' value='5'/>
<bandwidth initiator='0' target='0' type='access' value='204800' unit='KiB'/>
</interconnects>
</numa>
</cpu>
This XML defines that accessing L1 cache of node #0 from node #0
has latency of 5ns.
However, the loop was not written properly. Well, the check in
it, as it was always checking for the first cache in the target
node and not the rest. Therefore, the following example errors
out:
<cpu mode='host-model' check='partial'>
<numa>
<cell id='0' cpus='0-5' memory='512000' unit='KiB' discard='yes'>
<cache level='3' associativity='direct' policy='writeback'>
<size value='10' unit='KiB'/>
<line value='8' unit='B'/>
</cache>
<cache level='1' associativity='direct' policy='writeback'>
<size value='8' unit='KiB'/>
<line value='5' unit='B'/>
</cache>
</cell>
<interconnects>
<latency initiator='0' target='0' cache='1' type='access' value='5'/>
<bandwidth initiator='0' target='0' type='access' value='204800' unit='KiB'/>
</interconnects>
</numa>
</cpu>
This errors out even though it is a valid configuration. The L1
cache under node #0 is still present.
Fixes: f0611fe883
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Both parsing and formatting of NBD migration jobs is QEMU specific and
since we're trying to create a hypervisor-agnostic module out of
qemu_domainjob.c, move the NBD XML handling bits to the qemu_domain
module instead. Additionally, move the respective NBD XML calls to
the 'parseJob'/'formatJob' callbacks of the
qemuDomainObjPrivateJobCallbacks structure.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Functions `qemuDomainRemoveInactiveJob` and
`qemuDomainRemoveInactiveJobLocked` had their declaration misplaced in
`qemu_domainjob` and were moved to `qemu_domain` where their definitions
reside.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Most of our augeas files are generated during meson setup into build
directory and we were running augeas tests only for these files.
However, we have some other augeas and config files that are not
modified during meson setup and they are only in source directories.
In order to run tests for these files we need to provide different path
to both source and build directories.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This will be used later to specify different include directories for
augparse binary to run augeas tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 862cf2ace4 modified the generator
to base edit links in the root of the repository but forgot to add the
'docs/' prefix to the code generating kbase articles, manpages and the
internals documentation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In case qemuDumpToFd() returns zero followed by a VIR_CLOSE(fd) fail,
we'd jump to the "cleanup" label with "ret=0", potentially resulting in
an unexpected success return value.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In one of my latest patch (v6.6.0~30) I was trying to remove
libdevmapper use in favor of our own implementation. However, the
code did not take into account that device mapper can be not
compiled into the kernel (e.g. be a separate module that's not
loaded) in which case /proc/devices won't have the device-mapper
major number and thus virDevMapperGetTargets() and/or
virIsDevMapperDevice() fails.
However, such failure is safe to ignore, because if device mapper
is missing then there can't be any multipath devices and thus we
don't need to allow the deps in CGroups, nor create them in the
domain private namespace, etc.
Fixes: 2249455654
Reported-by: Andrea Bolognani <abologna@redhat.com>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The device mapper major is needed in virIsDevMapperDevice() which
determines whether given device is managed by device-mapper. This
number is obtained by parsing /proc/devices and then stored in a
global variable so that the file doesn't have to be parsed again.
However, as it turns out this logic is flawed - the major number
is not static and can change as it can be specified as a
parameter when loading the dm-mod module.
Unfortunately, I was not able to come up with a good solution and
thus the /proc/devices file is being parsed every time we need
the device mapper major.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Slightly improve the list of known authentication service types:
- reword 'ssh' to mention it is used for the ssh driver (for remote
QEMU), and stop mentioning the removed Phyp driver
- add 'hyperv', used by the HyperV driver
- alphabetically sort the list
- use a bulletted list instead of a numbered one
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Change the 'make check' reference after the switch to meson/ninja.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Update the remaining 'make check' references after the
switch to meson/ninja.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Update the remaining 'make check' references after the
switch to meson/ninja.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Update the remaining 'make check' references after the
switch to meson/ninja.
The reference in testsuites.html.in was kept with a note that it is
the process for Libvirt 6.6.0 and older.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
GCC 10 complains about variables may be used uninitialized.
Even though it might be false positives, we can easily avoid them.
Avoiding
../src/storage/storage_backend_iscsi_direct.c:634:11: error: ‘nb_block’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
634 | while (lba < nb_block) {
| ^
../src/storage/storage_backend_iscsi_direct.c:619:14: note: ‘nb_block’ was declared here
619 | uint64_t nb_block;
| ^~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:637:16: error: ‘block_size’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
637 | task = iscsi_write16_sync(iscsi, lun, lba, data,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
638 | block_size * to_write,
| ~~~~~~~~~~~~~~~~~~~~~~
639 | block_size, 0, 0, 0, 0, 0);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:618:14: note: ‘block_size’ was declared here
618 | uint32_t block_size;
| ^~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c: In function ‘virStorageBackendISCSIDirectRefreshPool’:
../src/storage/storage_backend_iscsi_direct.c:320:39: error: ‘nb_block’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
320 | vol->target.capacity = block_size * nb_block;
| ~~~~~~~~~~~^~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:306:14: note: ‘nb_block’ was declared here
306 | uint64_t nb_block;
| ^~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:320:39: error: ‘block_size’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
320 | vol->target.capacity = block_size * nb_block;
| ~~~~~~~~~~~^~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:305:14: note: ‘block_size’ was declared here
305 | uint32_t block_size;
| ^~~~~~~~~~
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
GCC 10 complains about "arg" possibly being a NULL dereference.
Even though it might be a false positive, we can easily avoid it.
Avoiding
../tools/vsh.c: In function ‘vshCommandOptStringReq’:
../tools/vsh.c:1034:19: error: potential null pointer dereference [-Werror=null-dereference]
1034 | else if (!*arg->data && !(arg->def->flags & VSH_OFLAG_EMPTY_OK))
| ~~~^~~~~~
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
GCC 10 complains about "well_formed_uri" may be used uninitialzed.
Even though it is a false positive, we can easily avoid it.
Avoiding
../src/qemu/qemu_migration.c: In function ‘qemuMigrationDstPrepareDirect’:
../src/qemu/qemu_migration.c:2920:16: error: ‘well_formed_uri’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2920 | if (well_formed_uri) {
| ^
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
sc_spacing-check FAIL reporting a case of "Curly brackets around
single-line body:" in a recent commit.
Fixes: d9c21f4b "apparmor: allow adding permanent per guest rules"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
With qemu 5.0 and libvirt 6.6 there are new apparmor denials:
apparmor="DENIED" operation="umount" profile="libvirtd"
name="/run/libvirt/qemu/1-kvmguest-groovy-norm.dev/" comm="rpc-worker"
These are related to new issues around devmapper handling [1] and the
error path triggered by these issues now causes this new denial.
There are already related rules for mounting and it seems right to
allow also the related umount.
[1]: https://www.redhat.com/archives/libvir-list/2020-August/msg00236.html
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The design of apparmor in libvirt always had a way to define custom
per-guest rules as described in docs/drvqemu.html and [1].
A fix meant to clean the profiles after guest shutdown was a bit
overzealous and accidentially removed this important admin feature as
well.
Therefore reduce the --delete option of virt-aa-helper to only delete
the .files that would be re-generated in any case.
Users/Admins are always free to clean the profiles themselve if they
prefer a clean directory - they will be regenerated as needed. But
libvirt should never remove the base profile meant to allow per-guest
overrides and thereby break a documented feature.
[1]: https://gitlab.com/apparmor/apparmor/-/wikis/Libvirt#advanced-usage
Fixes: eba2225b "apparmor: delete profile on VM shutdown"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we don't have cgroups available and user tries to update blkio
parameters for running VM it will crash.
It should have been protected by the virCgroupHasController() check but
it was never called if the API was executed without any flags.
We call virDomainObjGetDefs() which sets `def` and `persistentDef` based
on the flags and these two variables should be used to figure out if we
need to update LIVE, CONFIG or both states.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1808293
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With virtio-net we also need to disable the iPXE option ROM otherwise
a SEV-enabled guest would not boot. While at it, fix the full machine
XML examples accordingly.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
src/bhyve/bhyve_parse_command.c:437:9: warning: Either the condition
'!config' is redundant or there is possible null pointer dereference:
config. [nullPointerRedundantCheck]
src/bhyve/bhyve_parse_command.c:280:23: warning: Either the condition
'!separator' is redundant or there is pointer arithmetic
with NULL pointer. [nullPointerArithmeticRedundantCheck]
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
BPF syscall BPF_MAP_GET_NEXT_KEY returns -1 if something fails but it
will also return -1 if trying to get next key using the last key in the
map with errno set to ENOENT.
If there are VMs running and libvirtd is restarted and user tries to
call some cgroup devices operation on a VM we need to get the count of
entries in BPF map and it fails which will result in error when trying
to attach/detech devices.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1833321
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When checking for ifconfig(8), set not only IFCONFIG value,
but also IFCONFIG_PATH as it's used in util/virnetdevip.c.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add missing prerequisite headers for checking BRDGSFD, BRDGADD,
BRDGDEL in net/if_bridgevar.h.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add missing prerequisite headers for checking link_addr(3)
in net/if_dl.h.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since [1] qemu can after upgrade fall back to pre-upgrade modules
to still be able to dynamically load qemu-module based features.
The paths for these modules are pre-defined by the code and should
be allowed to be mapped and loaded from which will allow packagers
avoiding the inability of late feature load [2] after package upgrades.
[1]: https://github.com/qemu/qemu/commit/bd83c861
[2]: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1847361
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange redhat com>
On some architectures (ppc, s390x, sparc, arm) qemu will read auxv
to detect hardware capabilities via qemu_getauxval.
Allow that access read-only for the entry owned by the current
qemu process.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Allow qemu to read @{PROC}/sys/vm/overcommit_memory.
This is read on guest start-up and (as read-only) not a
critical secret that has to stay hidden.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Jamie Strandboge <jamie@ubuntu.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When using xen through libxl in Debian/Ubuntu it needs to be able to
call pygrub.
This is placed in a versioned path like /usr/lib/xen-4.11/bin.
In theory the rule could be more strict by rendering the libexec_dir
setting pkg-config can derive from libbxen-dev. But that would make
particular libvirt/xen packages version-depend on each other. It seems
more reasonable to avoid these versioned dependencies and use a wildcard
rule instead as it is already in place for libxl-save-helper.
Note: This change was in Debian [1] and Ubuntu [2] for quite some time
already.
[1]: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931768
[2]: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1326003
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
/etc/pki/qemu is a pki path recommended by qemu tls docs [1]
and one that can cause issues with spice connections when missing.
Add the path to the allowed list of pki paths to fix the issue.
Note: this is active in Debian/Ubuntu [1] for quite a while already.
[1]: https://www.qemu.org/docs/master/system/tls.html
[2]: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=930100
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Following the rationale from commit
<2020c6af8a8e4bb04acb629d089142be984484c8> we should do the same thing
for iothread info as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit <6328da04285d9f65cb323d399f731c20caf63f5a> introduced
testDomainGetEmulatorPinInfo() into test driver but used
virHostCPUGetCount() function to get the number of host CPUs.
This would be correct for other drivers but in test driver we must not
depend on the host, we have to use hard-coded host representation that
we have in test driver.
Follows the logic of testDomainGetVcpuPinInfo().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit <2020c6af8a8e4bb04acb629d089142be984484c8> fixed an issue with
QEMU driver by reporting offline CPUs as well. However, doing so it
introduced a regression into libxl and test drivers by completely
ignoring the passed `hostcpus` variable.
Move the virHostCPUGetAvailableCPUsBitmap() out of the helper into QEMU
driver so it will not affect other drivers which gets the number of host
CPUs differently.
This was uncovered by running libvirt-dbus test suite which counts on
the fact that test driver has hard-coded host definition and must not
depend on the host at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is not expose in most historical versions of glibc, nor
non-glibc impls. We must use our wrapper API instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a Ctrl-C arrives while we are in the middle of executing the
virDomainCreateXML call, we will have no "virDomainPtr" object
available, but QEMU may none the less be running.
This means we'll never try to stop the QEMU process before we
honour the Ctrl-C and exit.
To deal with this race we need to postpone quit of the event
loop if it is requested while in the middle of domain startup.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a race between vir_event_thread_finalize and
virEventThreadWorker in releasing the last reference on
the GMainContext. If virEventThreadDataFree() runs after
vir_event_thread_finalize releases its reference, then
it will release the last reference on the GMainContext.
As a result g_autoptr cleanup on the GSource will access
free'd memory.
The race can be seen in non-deterministic crashes of the
virt-run-qemu program during its shutdown, but could
also likely affect the main libvirtd QEMU driver:
Thread 2 (Thread 0x7f508ffff700 (LWP 222813)):
#0 0x00007f509c8e26b0 in malloc_consolidate (av=av@entry=0x7f5088000020) at malloc.c:4488
#1 0x00007f509c8e4b08 in _int_malloc (av=av@entry=0x7f5088000020, bytes=bytes@entry=2048) at malloc.c:3711
#2 0x00007f509c8e6412 in __GI___libc_malloc (bytes=2048) at malloc.c:3073
#3 0x00007f509d6e925e in g_realloc (mem=0x0, n_bytes=2048) at gmem.c:164
#4 0x00007f509d705a57 in g_string_maybe_expand (string=string@entry=0x7f5088001f20, len=len@entry=1024) at gstring.c:102
#5 0x00007f509d705ab6 in g_string_sized_new (dfl_size=dfl_size@entry=1024) at gstring.c:127
#6 0x00007f509d708c5e in g_test_log_dump (len=<synthetic pointer>, msg=<synthetic pointer>) at gtestutils.c:3330
#7 0x00007f509d708c5e in g_test_log
(lbit=G_TEST_LOG_ERROR, string1=0x7f508800fcb0 "GLib:ERROR:ghash.c:377:g_hash_table_lookup_node: assertion failed: (hash_table->ref_count > 0)", string2=<optimized out>, n_args=0, largs=0x0) at gtestutils.c:975
#8 0x00007f509d70af2a in g_assertion_message
(domain=<optimized out>, file=0x7f509d7324a2 "ghash.c", line=<optimized out>, func=0x7f509d732750 <__func__.11348> "g_hash_table_lookup_node", message=<optimized out>)
at gtestutils.c:2504
#9 0x00007f509d70af8e in g_assertion_message_expr
(domain=domain@entry=0x7f509d72d76e "GLib", file=file@entry=0x7f509d7324a2 "ghash.c", line=line@entry=377, func=func@entry=0x7f509d732750 <__func__.11348> "g_hash_table_lookup_node", expr=expr@entry=0x7f509d732488 "hash_table->ref_count > 0") at gtestutils.c:2555
#10 0x00007f509d6d197e in g_hash_table_lookup_node (hash_table=0x55b70ace1760, key=<optimized out>, hash_return=<synthetic pointer>) at ghash.c:377
#11 0x00007f509d6d197e in g_hash_table_lookup_node (hash_return=<synthetic pointer>, key=<optimized out>, hash_table=0x55b70ace1760) at ghash.c:361
#12 0x00007f509d6d197e in g_hash_table_remove_internal (hash_table=0x55b70ace1760, key=<optimized out>, notify=1) at ghash.c:1371
#13 0x00007f509d6e0664 in g_source_unref_internal (source=0x7f5088000b60, context=0x55b70ad87e00, have_lock=0) at gmain.c:2103
#14 0x00007f509d6e1f64 in g_source_unref (source=<optimized out>) at gmain.c:2176
#15 0x00007f50a08ff84c in glib_autoptr_cleanup_GSource (_ptr=<synthetic pointer>) at /usr/include/glib-2.0/glib/glib-autocleanups.h:58
#16 0x00007f50a08ff84c in virEventThreadWorker (opaque=0x55b70ad87f80) at ../../src/util/vireventthread.c:114
#17 0x00007f509d70bd4a in g_thread_proxy (data=0x55b70acf3850) at gthread.c:784
#18 0x00007f509d04714a in start_thread (arg=<optimized out>) at pthread_create.c:479
#19 0x00007f509c95cf23 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Thread 1 (Thread 0x7f50a1380c00 (LWP 222802)):
#0 0x00007f509c8977ff in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007f509c881c35 in __GI_abort () at abort.c:79
#2 0x00007f509d72a823 in g_mutex_clear (mutex=0x55b70ad87e00) at gthread-posix.c:1307
#3 0x00007f509d72a823 in g_mutex_clear (mutex=mutex@entry=0x55b70ad87e00) at gthread-posix.c:1302
#4 0x00007f509d6e1a84 in g_main_context_unref (context=0x55b70ad87e00) at gmain.c:582
#5 0x00007f509d6e1a84 in g_main_context_unref (context=0x55b70ad87e00) at gmain.c:541
#6 0x00007f50a08ffabb in vir_event_thread_finalize (object=0x55b70ad83180 [virEventThread]) at ../../src/util/vireventthread.c:50
#7 0x00007f509d9c48a9 in g_object_unref (_object=<optimized out>) at gobject.c:3340
#8 0x00007f509d9c48a9 in g_object_unref (_object=0x55b70ad83180) at gobject.c:3232
#9 0x00007f509583d311 in qemuProcessQMPFree (proc=proc@entry=0x55b70ad87b90) at ../../src/qemu/qemu_process.c:8355
#10 0x00007f5095790f58 in virQEMUCapsInitQMPSingle
(qemuCaps=qemuCaps@entry=0x55b70ad88010, libDir=libDir@entry=0x55b70ad049e0 "/tmp/virt-qemu-run-VZC9N0/lib/qemu", runUid=runUid@entry=107, runGid=runGid@entry=107, onlyTCG=onlyTCG@entry=false) at ../../src/qemu/qemu_capabilities.c:5409
#11 0x00007f509579108f in virQEMUCapsInitQMP (runGid=107, runUid=107, libDir=0x55b70ad049e0 "/tmp/virt-qemu-run-VZC9N0/lib/qemu", qemuCaps=0x55b70ad88010)
at ../../src/qemu/qemu_capabilities.c:5420
#12 0x00007f509579108f in virQEMUCapsNewForBinaryInternal
(hostArch=VIR_ARCH_X86_64, binary=binary@entry=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", libDir=0x55b70ad049e0 "/tmp/virt-qemu-run-VZC9N0/lib/qemu", runUid=107, runGid=107, hostCPUSignature=0x55b70ad01320 "GenuineIntel, Intel(R) Xeon(R) Silver 4210 CPU @ 2.20GHz, family: 6, model: 85, stepping: 7", microcodeVersion=83898113, kernelVersion=0x55b70ad00d60 "4.18.0-211.el8.x86_64 #1 SMP Thu Jun 4 08:08:16 UTC 2020") at ../../src/qemu/qemu_capabilities.c:5472
#13 0x00007f5095791373 in virQEMUCapsNewData (binary=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", privData=0x55b70ad5b8f0) at ../../src/qemu/qemu_capabilities.c:5505
#14 0x00007f50a09a32b1 in virFileCacheNewData (name=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", cache=<optimized out>) at ../../src/util/virfilecache.c:208
#15 0x00007f50a09a32b1 in virFileCacheValidate (cache=cache@entry=0x55b70ad5c030, name=name@entry=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", data=data@entry=0x7ffca39ffd90)
at ../../src/util/virfilecache.c:277
#16 0x00007f50a09a37ea in virFileCacheLookup (cache=cache@entry=0x55b70ad5c030, name=name@entry=0x55b70ad7dc40 "/usr/libexec/qemu-kvm") at ../../src/util/virfilecache.c:310
#17 0x00007f5095791627 in virQEMUCapsCacheLookup (cache=0x55b70ad5c030, binary=0x55b70ad7dc40 "/usr/libexec/qemu-kvm") at ../../src/qemu/qemu_capabilities.c:5647
#18 0x00007f50957c34c3 in qemuDomainPostParseDataAlloc (def=<optimized out>, parseFlags=<optimized out>, opaque=<optimized out>, parseOpaque=0x7ffca39ffe18)
at ../../src/qemu/qemu_domain.c:5470
#19 0x00007f50a0a34051 in virDomainDefPostParse
(def=def@entry=0x55b70ad7d200, parseFlags=parseFlags@entry=258, xmlopt=xmlopt@entry=0x55b70ad5d010, parseOpaque=parseOpaque@entry=0x0)
at ../../src/conf/domain_conf.c:5970
#20 0x00007f50a0a464bb in virDomainDefParseNode
(xml=xml@entry=0x55b70aced140, root=root@entry=0x55b70ad5f020, xmlopt=xmlopt@entry=0x55b70ad5d010, parseOpaque=parseOpaque@entry=0x0, flags=flags@entry=258)
at ../../src/conf/domain_conf.c:22520
#21 0x00007f50a0a4669b in virDomainDefParse
(xmlStr=xmlStr@entry=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., filename=filename@entry=0x0, xmlopt=0x55b70ad5d010, parseOpaque=parseOpaque@entry=0x0, flags=flags@entry=258) at ../../src/conf/domain_conf.c:22474
#22 0x00007f50a0a467ae in virDomainDefParseString
(xmlStr=xmlStr@entry=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., xmlopt=<optimized out>, parseOpaque=parseOpaque@entry=0x0, flags=flags@entry=258)
at ../../src/conf/domain_conf.c:22488
#23 0x00007f50958ce112 in qemuDomainCreateXML
(conn=0x55b70acf9090, xml=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., flags=0) at ../../src/qemu/qemu_driver.c:1744
#24 0x00007f50a0c268ac in virDomainCreateXML
(conn=0x55b70acf9090, xmlDesc=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., flags=0) at ../../src/libvirt-domain.c:176
#25 0x000055b709547e7b in main (argc=<optimized out>, argv=<optimized out>) at ../../src/qemu/qemu_shim.c:289
The solution is to explicitly unref the GSource at a safe time instead
of letting g_autoptr unref it when leaving scope.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
