The test suite has hardcoded /etc/pki/qemu as the cert dir, but this
only works if configure has --sysconfdir=/etc passed. We must set the
vxhs cert dir to a stable path in the test suite.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Alter qemu command line generation in order to possibly add TLS for
a suitably configured domain.
Sample TLS args generated by libvirt -
-object tls-creds-x509,id=objvirtio-disk0_tls0,dir=/etc/pki/qemu,\
endpoint=client,verify-peer=yes \
-drive file.driver=vxhs,file.tls-creds=objvirtio-disk0_tls0,\
file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,\
id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update the qemuxml2argvtest with a couple of examples. One for a
simple case and the other a bit more complex where multiple VxHS disks
are added where at least one uses a VxHS that doesn't require TLS
credentials and thus sets the domain disk source attribute "tls = 'no'".
Update the hotplug to be able to handle processing the tlsAlias whether
it's to add the TLS object when hotplugging a disk or to remove the TLS
object when hot unplugging a disk. The hot plug/unplug code is largely
generic, but the addition code does make the VXHS specific checks only
because it needs to grab the correct config directory and generate the
object as the command line would do.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Introduce a function to setup any TLS needs for a disk source.
If there's a configuration or other error setting up the disk source
for TLS, then cause the domain startup to fail.
For VxHS, follow the chardevTLS model where if the src->haveTLS hasn't
been configured, then take the system/global cfg->haveTLS setting for
the storage source *and* mark that we've done so via the tlsFromConfig
setting in storage source.
Next, if we are using TLS, then generate an alias into a virStorageSource
'tlsAlias' field that will be used to create the TLS object and added to
the disk object in order to link the two together for QEMU.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.
Sample XML for a VxHS disk:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.
Update the qemuxml2xmltest in order to add a test to show the proper
parsing.
Also update the docs to describe the tls attribute.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new TLS X.509 certificate type - "vxhs". This will handle the
creation of a TLS certificate capability for properly configured
VxHS network block device clients.
The following describes the behavior of TLS for VxHS block device:
(1) Two new options have been added in /etc/libvirt/qemu.conf
to control TLS behavior with VxHS block devices
"vxhs_tls" and "vxhs_tls_x509_cert_dir".
(2) Setting "vxhs_tls=1" in /etc/libvirt/qemu.conf will enable
TLS for VxHS block devices.
(3) "vxhs_tls_x509_cert_dir" can be set to the full path where the
TLS CA certificate and the client certificate and keys are saved.
If this value is missing, the "default_tls_x509_cert_dir" will be
used instead. If the environment is not configured properly the
authentication to the VxHS server will fail.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virNWFilterIPAddrMapAddIPAddr code can consume the @addr parameter
on success when the @ifname is found in the ipAddressMap->hashTable
hash table in the call to virNWFilterVarValueAddValue; however, if
not found in the hash table, then @addr is formatted into a @val
which is stored in the table and on return the caller would be
expected to free @addr.
Thus, the caller has no way to determine on success whether @addr was
consumed, so in order to fix this create a @tmp variable which will
be stored/consumed when virNWFilterVarValueAddValue succeeds. That way
the caller can free @addr whether the function returns success or failure.
The packet with passed FD has the following format:
--------------------------
| len | header | payload |
--------------------------
where "payload" has an additional count of FDs before the actual data:
------------------
| nfds | payload |
------------------
When the packet is received we parse the "header", which as a side
effect updates msg->bufferOffset to point to the beginning of "payload".
If the message call contains FDs, we need to also parse the count of
FDs, which also updates the msg->bufferOffset.
The issue here is that when we attempt to read the FDs data from the
socket and we receive EAGAIN we finish the reading and call poll()
to wait for the data the we need. When the data arrives we already have
the packet in our buffer so we read the "header" again but this time
we don't read the count of FDs because we already have it stored.
That means that the msg->bufferOffset is not updated to point to the
actual beginning of the payload data, but it points to the count of
FDs. After all FDs are processed we dispatch the message to process
it and decode the payload. Since the msg->bufferOffset points to wrong
data, we decode the wrong payload and the API call fails with
error messages:
Domain not found: no domain with matching uuid '67656e65-7269-6300-0c87-5003ca6941f2' ()
Broken by commit 133c511b52 which fixed a FD and memory leak.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
VM private data is cleared when the VM is turned off and also when the
VM object is being freed. Some of the clearing code was duplicated.
Extract it to a separate function.
This also removes the now unnecessary function
qemuDomainClearPrivatePaths.
Calling fallocate on the new (smaller) capacity ensures
that the whole file is allocated, but it does not reduce
the file size.
Also call ftruncate after fallocate.
https://bugzilla.redhat.com/show_bug.cgi?id=1366446
We have been trying to implement the ALLOCATE flag to mean
"the volume should be fully allocated after the resize".
Since commit b0579ed9 we do not allocate from the existing
capacity, but from the existing allocation value.
However this value is a total of all the allocated bytes,
not an offset.
For a sparsely allocated file:
$ perl -e 'print "x"x8192;' > vol1
$ fallocate -p -o 0 -l 4096 vol1
$ virsh vol-info vol1 default
Capacity: 8.00 KiB
Allocation: 4.00 KiB
Treating allocation as an offset would result in an incompletely
allocated file:
$ virsh vol-resize vol1 --pool default 16384 --allocate
Capacity: 16.00 KiB
Allocation: 12.00 KiB
Call fallocate from zero on the whole requested capacity to fully
allocate the file. After that, the volume is fully allocated
after the resize:
$ virsh vol-resize vol1 --pool default 16384 --allocate
$ virsh vol-info vol1 default
Capacity: 16.00 KiB
Allocation: 16.00 KiB
Introduce a new function virFileAllocate that will call the
non-destructive variants of safezero, essentially reverting
my commit 1390c268
safezero: fall back to writing zeroes even when resizing
back to the state as of commit 18f0316
virstoragefile: Have virStorageFileResize use safezero
This means that _ALLOCATE flag will no longer work on platforms
without the allocate syscalls, but it will not overwrite data
either.
https://bugzilla.redhat.com/show_bug.cgi?id=1476775
For the virsh pool-{define|create}-as command, let's allow using
--secret-uuid on the command line as an alternative to --secret-usage
(added for commit id '8932580'), but ensure that they are mutually
exclusive.
Use an empty string to let qemu fill out the default.
This matches what's done in qemuBuildChrChardevStr.
https://bugzilla.redhat.com/show_bug.cgi?id=1454671
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This reverts commit edaf4ebe95.
This uses "reconnect" as attribute for <source> element, but we already
have a <reconnect> element for <source> element for chardev devices.
Since this is the same feature for different device it should be
presented in XML the same way.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Some values we read from the qemu monitor may be changed with the actual
state by the incoming migration. This means that we should refresh
certain things only after the migration has finished.
This is mostly visible in the cdrom tray state, which is by default
closed but may be opened by the guest OS. This would be refreshed before
qemu transferred the actual state and thus libvirt would think that the
tray is closed.
Note that this patch moves only a few obvious query commands. Others may
be moved later after individual assessment.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1463168
When the vcpu is successfully removed libvirt would remove the cgroup.
In cases when removal of the cgroup fails libvirt would report an error.
This does not make much sense, since the vcpu was removed and we can't
really do anything with the cgroup. This patch silences the errors from
cgroup removal.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1462092
It is possible (although possibly not very useful) to leave out
the service attribute when using <source mode='bind'/>
Fix the formatter bug introduced by commit 4a0da34 and format
the host when its present (checked for non-NULL inside
virBufferEscapeString) instead of basing it on the presence
of the service attribute.
https://bugzilla.redhat.com/show_bug.cgi?id=1455825
The alias recorded in disk->info.alias is the alias for the frontend
device but we are interested in the backend drive. This messed up the
disk node name extraction code as qemu reports the drive alias in the
block query commands. This was broken in the node name detector
refactoring done in commit 0175dc6ea0
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1494327
Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex. Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The functionality was added in 4.8, but due to a rename of
the DEVLINK_CMD_ESWITCH_GET constant in the kernel headers,
the headers from kernel 4.11 are required by the libvirt code.
Remove the reference from the news entry, since it could be
misleading.
Some distros (see diff) chose to backport QMP support rather than rebase
to newer version of qemu. As a hack they added the string 'libvirt' to
the qemu -help output. Remove this as downstream-only hacks should be
carried by downstream and not litter upstream.
This effectively reverts commit ff88cd5905
Because qemuDomainDefCopy needs a string representation of a domain
definition, there's no reason for calling the lower level
qemuDomainDefFormatBuf API.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainDefFormatInternal (called by qemuDomainDefFormatXMLInternal)
already checks for buffer errors and properly resets the buffer on
failure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In my previous commit of b1d87f9ad9 I've made a typo breaking
the FreeBSD build. s/ipAaddr/ipAddr/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
instead of only unloading it. This makes sure old profiles don't pile up
in /etc/apparmor.d/libvirt and we get updates to modified templates on
VM restart.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
After commit 8708ca01c0 libvirtd consistently aborts with "stack
smashing detected" when nodedev driver is initialized.
This is caused by nlmsg_parse() being told that its array of nlattr*
has CTRL_CMD_MAX (10) entries, when in fact it is declared to have
CTRL_ATTR_MAX (8) entries. Since all the entries are initialized to
NULL, the result is that nlmsg_parse is overwriting 2*(sizof(nlattr*))
bytes outside the array.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit id '5604c056' used the wrong API to generate the
<secret type='%s'..." field. The previous code used the
correct API as was done in commit id '6887af39'. The data
is actually a usage type not an auth type even though the
result is the same.
Passing a NULL value for the argument secAlias to the function
qemuDomainGetTLSObjects would cause a segmentation fault in
libvirtd.
Changed code to check before dereferencing a NULL secAlias.
Signed-off-by: Ashish Mittal <ashmit602@gmail.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1448268
When migrating to a file (e.g. when doing 'virsh save file'),
couple of things are happening in the thread that is executing
the API:
1) the domain obj is locked
2) iohelper is spawned as a separate process to handle all I/O
3) the thread waits for iohelper to finish
4) the domain obj is unlocked
Now, the problem is that while the thread waits in step 3 for
iohelper to finish this may take ages because iohelper calls
fdatasync(). And unfortunately, we are waiting the whole time
with the domain locked. So if another thread wants to jump in and
say copy the domain name ('virsh list' for instance), they are
stuck.
The solution is to unlock the domain whenever waiting for I/O and
lock it back again when it finished.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1471225
Commit id '99a2d6af2' was a bit too aggressive with determining whether
the provided path was a "physical" cd-rom in order to generate a taint
message due to the possibility of some guest and host trying to control
the tray. For cd-rom guest devices backed to some VIR_STORAGE_TYPE_FILE
storage, this wouldn't be a problem and as such it shouldn't be a problem
for guest devices using some sort of block device on the host such as
iSCSI, LVM, or a Disk pool would present.
So before issuing a taint message, let's check if the provided path of
the VIR_STORAGE_TYPE_BLOCK backed device is a "known" physical cdrom name
by comparing the beginning of the path w/ "/dev/cdrom" and "/dev/sr".
Also since it's possible the provided path could resolve to some /dev/srN
device, let's get that path as well and perform the same check.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virSocketAddrFormat() allocates the string and it's caller
responsibility to free it afterwards.
==28857== 11 bytes in 1 blocks are definitely lost in loss record 37 of 168
==28857== at 0x4C2BEDF: malloc (vg_replace_malloc.c:299)
==28857== by 0x9A81D79: strdup (in /lib64/libc-2.23.so)
==28857== by 0x5DA3BF0: virStrdup (virstring.c:902)
==28857== by 0x5D96182: virSocketAddrFormatFull (virsocketaddr.c:427)
==28857== by 0x5D95E13: virSocketAddrFormat (virsocketaddr.c:352)
==28857== by 0x5706890: qemuBuildHostNetStr (qemu_command.c:3891)
==28857== by 0x57138D3: qemuBuildInterfaceCommandLine (qemu_command.c:8597)
==28857== by 0x5713D6A: qemuBuildNetCommandLine (qemu_command.c:8699)
==28857== by 0x57176F6: qemuBuildCommandLine (qemu_command.c:10027)
==28857== by 0x5769D61: qemuProcessCreatePretendCmd (qemu_process.c:6004)
==28857== by 0x4056EC: testCompareXMLToArgv (qemuxml2argvtest.c:502)
==28857== by 0x41DF40: virTestRun (testutils.c:180)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since commit v2.2.0-199-g7ce711a30e libvirt stores an updated guest CPU
in domain's live definition and there's no need to update it every time
we want to format the definition. The commit itself tried to address
this in qemuDomainFormatXML, but forgot to fix qemuDomainDefFormatLive.
Not to mention that masking a previously set flag is only acceptable if
the flag was set by a public API user. Internally, libvirt should have
never set the flag in the first place.
https://bugzilla.redhat.com/show_bug.cgi?id=1485022
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When a user requested a domain XML description with
VIR_DOMAIN_XML_UPDATE_CPU flag, libvirt would use the host CPU
definition from host capabilities rather than the one which will
actually be used once the domain is started.
https://bugzilla.redhat.com/show_bug.cgi?id=1481309
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In the past we updated host-model CPUs with host CPU data by adding a
model and features, but keeping the host-model mode. And since the CPU
model is not normally formatted for host-model CPU defs, we had to pass
the updateCPU flag to the formatting code to be able to properly output
updated host-model CPUs. Libvirt doesn't do this anymore, host-model
CPUs are turned into custom mode CPUs once updated with host CPU data
and thus there's no reason for keeping the hacks inside CPU XML
formatters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
