* configure.in: Enable internal WITH_BRIDGE support not just for LXC or
QEMU, but also for --with-network. Russell Haering reported that
compilation failed when configured with --without-lxc --without-qemu.
Details: http://thread.gmane.org/gmane.comp.emulators.libvirt/11928
* src/bridge.h: Use #if WITH_BRIDGE, rather than currently-equivalent
"#if defined(WITH_QEMU) || defined(WITH_LXC)"
* configure.in: Provide a new --with-bridge option.
* src/Makefile.am (PRIVSYMFILES) [WITH_BRIDGE]: Append libvirt_bridge.syms.
* src/bridge.c: Test WITH_BRIDGE rather than particular drivers.
* src/libvirt_private.syms: Move bridge-related symbols into...
* src/libvirt_bridge.syms: ...this new file.
Author: John Levon
have udevsettle. So change our tests to prefer udevadm if it exists, but
to fall back to udevsettle if it does not.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
really should be synchronizing against udev. This is generally done by a call
to udevsettle, which is exactly what this patch implements for the storage
backends that are likely to create new /dev nodes. I believe I've read that
even after udevsettle, you are not guaranteed that devices are all the way
created, so we still need the polling in the rest of the sources, but this
should give us a much better chance of things existing as we expect.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* configure.in docs/* NEWS: release of 0.5.0
* po/*: updated from the translators and merged
* docs/apibuild.py src/libvirt.c: avoid some warnings at doc
generation time
daniel
* tests/virshtest.c: Embed literal, expected output here, rather than
using virshdata/*.txt file names.
Factor out some common constructs.
(testCompareOutputLit): New function.
(testCompareOutput): #ifdef-out, not that it's unused.
* tests/Makefile.am (SUBDIRS): Remove virshdata/ and all files in it.
* docs/testnode.xml: Fix typo in a comment.
* configure.in (AC_OUTPUT): Remove tests/virshdata/Makefile.
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/libvirt.c src/libvirt_sym.version: new libvirt event entry
points, big patch provided by Ben Guthro
* Makefile.am configure.in src/driver.h src/event.c src/event.h
src/internal.h src/libvirt.c src/libvirt_sym.version src/lxc_driver.c
src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
src/remote_internal.c src/storage_backend_fs.c src/test.c
qemud/event.c qemud/event.h qemud/mdns.c qemud/qemud.c
qemud/qemud.h qemud/remote.c qemud/remote_dispatch_localvars.h
qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x proxy/Makefile.am python/generator.py:
Not much is left untouched by the patch adding the events support
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/html/libvirt-libvirt.html: regenerated the docs
* examples/domain-events/events-c/Makefile.am
examples/domain-events/events-c/event-test.c: a test example
* AUTHORS: added Ben Guthro
daniel
* .cvsignore, Makefile.am, autobuild.sh, configure.in,
mingw32-libvirt.spec.in: Import the latest MinGW libvirt spec
file. Note that the file has been renamed to conform to
new Fedora packaging guidelines.
* autobuild.sh: Fix a bug in the generation of the $EXTRA_RELEASE
field when autobuilding.
* configure.in: Explicitly add -lpthread to $LIBS.
With an empty "ACTION_IF_FOUND", AC_CHECK_LIB would have done
that for us automatically, but when there is an explicit third
argument, those commands are run instead of the default.
Reported by Jun Koi <junkoi2004@gmail.com>.
release
* src/xm_internal.c: fix xm driver serialization escapes
* tests/xmconfigtest.c tests/xmconfigdata/test-escape-paths.cfg
tests/xmconfigdata/test-escape-paths.xml: add test for previous
problem
Daniel
* include/libvirt/libvirt.h.in, src/libvirt.c, src/driver.h,
src/libvirt_sym.version: New virDomainMemoryPeek API.
* qemud/remote.c, qemud/remote_protocol.x, src/remote_internal.c:
Support for remote.
* src/qemu_driver.c: QEMU driver implementation of API.
* src/test.c: Test driver (null) implementation of API.
* docs/hvsupport.html.in: Document API.
* libvirt.spec.in: New path /var/cache/libvirt for temporary
storage of memory images.
* qemud/libvirtd.init.in: Remove any old temp files in
/var/cache/libvirt on restarts.
* src/Makefile.am: make install creates /var/cache/libvirt.
* configure.in: Detect mkdir -p.
* configure.in: Document AC_SYS_LARGEFILE.
* docs/hvsupport.html.in: Document HV support for virDomainBlockPeek.
* include/libvirt/libvirt.h.in, src/driver.h, src/libvirt.c,
src/libvirt_sym.version: Add virDomainBlockPeek infrastructure.
* src/qemu_driver.c, src/test.c: Null versions of this call.
* src/xen_unified.c, src/xend_internal.c, src/xend_internal.h,
src/xm_internal.c, src/xm_internal.h: Xen implementation.
* tests/sexpr2xmldata/sexpr2xml-curmem.xml,
tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: XML output
has been reordered slightly in the Xen driver, but should be
functionally the same.
* configure.in: Fix pkg-config detection of libxml2,
add -lgcrypt to gnutls lib.
* src/Makefile.am: If compiling --without-libvirtd then
don't compile any part of the storage driver.
* configure.in, src/hash.c, src/internal.h: Detect availability
of pthread library and compile out mutex code if not available.
* src/storage_driver.c, src/util.c: Ignore some missing
headers on MinGW.
* configure.in include/libvirt/virterror.h src/Makefile.am
src/driver.h src/lxc_conf.[ch] src/lxc_driver.[ch] src/virterror.c:
Applied 3 patches from Dave Leskovec for intial support of
Linux containers, configured off by default, work in progress.
* src/libvirt.c: improve virDomainCreateLinux xmlDesc description
Daniel
* src/Makefile.am (cov): Rewrite rule to merge gcov results corresponding
to two .o files: the libvirt_la- one, and the libvirt_test_la- one.
(tst): Remove unused rule.
* configure.in (LV_LIBTOOL_OBJDIR): Define and AC_SUBST.
* configure.in: Use PortableXDR if available.
* qemud/internal.h: Use "socketcompat.h".
* qemud/qemud.c: Use <signal.h>.
* src/sexpr.c: Use <stdlib.h> instead of <malloc.h>.
* src/socketcompat.h: Include <sys/un.h> for Mac OS X.
a proposed system for letting iptables know how to
reload our rules. The proposed system wasn't accepted
so, although there might be some other theoretical
use for this, let's just remove it.
iptables configuration using the lokkit --custom-rules command.
Basically, we write out our rules to /var/lib/libvirt/iptables
and run lokkit --custom-rules so that if e.g. iptables is
restarted or the user edits their firewall configuration, then
libvirt's rules get reloaded.
* configure.in: xdr functions may require -lxdr.
* configure.in, src/Makefile.am: Extra linking flags for
building libvirt DLL.
* src/socketcompat.h: Hide Windows Winsock incompatibilities
in a separate header file.
* src/remote_internal.c: Switch to using socketcompat.h /
socket_errno().
* src/test.c: Switch to using socketcompat.h.
* gnulib/lib/arpa/.cvsignore: Ignore another generated file.
* src/qparams.c: Include <config.h>.
* configure.in: If the test for -lreadline fails, search for a
library with termcap support. If one is found (often -lncurses),
rerun the test for -lreadline, linking also with the new library.
Author: Jim Meyering <meyering@redhat.com>
