Commit Graph

745 Commits

Author SHA1 Message Date
Laine Stump
8f578716c7 conf: allow type='pci' addresses with no address attributes specified
Prior to this, <address type='pci'/> wasn't allowed when parsing
(domain+bus+slot+function needed to be a "valid" PCI address, meaning
that at least one of domain/bus/slot had to be non-0), the RNG
required bus to be specified, and if type was set to PCI when
formatting, domain+bus+slot+function would always be output.

This makes all the address attributes optional during parse and RNG
validation, and suppresses domain+bus+slot+function if domain+bus+slot
are all 0 (NB: if d+b+s are all 0, any value for function is
nonsensical as that will never happen in the real world, and after
the next patch we will always assign a real working address to any
empty PCI address before it is ever output to anywhere).

Note that explicitly setting all attributes to 0 is equivalent to
setting none of them, which is okay, since 0000:00:00 is reserved in
any PCI bus setup, and can't be used anyway.
2016-05-20 13:54:25 -04:00
Pavel Hrdina
b33c14b342 graphics: make address attribute for listen type='address' optional
We support omitting listen attribute of graphics element so we should
also support omitting address attribute of listen element.  This patch
also updates libvirt to always add a listen element into domain XML
except for VNC graphics if socket attribute is specified.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-05-17 10:41:45 +02:00
Christophe Fergeau
28675d633b schemas: Improve outdated comment 2016-05-12 14:53:24 +02:00
Cole Robinson
5ed235c68f domaincaps: Report video modelType
Requires adding the plumbing for <device><video>
The value is <enum name='modelType'> to match the associated domain
XML of <video><model type='XXX'/>

Wire it up for qemu too
2016-05-09 16:05:31 -04:00
Cole Robinson
6da27ad1b5 domaincaps: Report graphics type enum
Requires adding the plumbing for <device><graphics>
Wire it up for qemu too
2016-05-09 16:05:31 -04:00
John Ferlan
e0d0e53086 conf: Add support for virtio-scsi iothreads
Add the ability to add an 'iothread' to the controller which will be how
virtio-scsi-pci and virtio-scsi-ccw iothreads have been implemented in qemu.

Describe the new functionality and add tests to parse/validate that the
new attribute can be added.
2016-05-04 09:59:14 -04:00
Cole Robinson
600977e293 qemu: support configuring usb3 controller port count
This adds a ports= attribute to usb controller XML, like

  <controller type='usb' model='nec-xhci' ports='8'/>

This maps to:

  qemu -device nec-usb-xhci,p2=8,p3=8

Meaning, 8 ports that support both usb2 and usb3 devices. Gerd
suggested to just expose them as one knob.

https://bugzilla.redhat.com/show_bug.cgi?id=1271408
2016-05-03 08:58:30 -04:00
Boris Fiuczynski
d855465452 qemu: add panic device support for S390
If a panic device is being defined without a model in a domain
the default value is always overwritten with model ISA. An ISA
bus does not exist on S390 and therefore specifying a panic device
results in an unsupported configuration.
Since the S390 architecture inherently provides a crash detection
capability the panic device should be defined in the domain xml.

This patch adds an s390 panic device model and prevents setting a
device address on it.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-05-02 17:01:40 +02:00
Martin Kletzander
9840761fb4 schemas: Update nodedev schema to match reality
There were few things done in the nodedev code but we were lacking tests
for it.  And because of that we missed that the schema was not updated
either.  Fix the schema and add various test files to show the schema
is correct.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-05-02 15:46:23 +02:00
Martin Kletzander
88c8be67d4 Move capability formatting together
All sub-PCI capabilities should be next to each other for clarity.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-05-02 15:46:23 +02:00
Laine Stump
1d14b13f3b Revert "libvirt domain xml allow to set peer address"
This reverts commit 690969af9c, which
added the domain config parts to support a "peer" attribute in domain
interface <ip> elements.

It's being removed temporarily for the release of libvirt 1.3.4
because the feature doesn't work, and there are concerns that it may
need to be modified in an externally visible manner which could create
backward compatibility problems.
2016-04-29 12:46:16 -04:00
Cole Robinson
67f2b72723 conf: Drop restrictions on rng backend path
Currently we only allow /dev/random and /dev/hwrng as host input
for <rng><backend model='random'/> device. This was added after
various upstream discussions in commit 4932ef45

However this restriction has generated quite a few complaints over
the years, so a new discussion was initiated:

http://www.redhat.com/archives/libvir-list/2016-April/msg00987.html

Several people suggested removing the restriction, and nobody really
spoke up to defend it. So this patch drops the path restriction
entirely

https://bugzilla.redhat.com/show_bug.cgi?id=1074464
2016-04-26 11:43:33 -04:00
Cole Robinson
600a666ce5 schema: Allow space character in disk vendor/product
The hex range already tried to allow for it, but it wasn't using
the correct XML hex syntax. Fix it, and test it
2016-04-26 10:29:44 -04:00
Andrea Bolognani
24f17f557a schema: Validate GIC capabilities
We need to expose GIC capabilities in the domain capabilities
XML: update the schema to validate documents that contain the
new information.
2016-04-20 12:51:39 +02:00
Laine Stump
bc07251f59 conf: new pci controller model pcie-expander-bus
This controller provides a single PCIe port on a new root. It is
similar to pci-expander-bus, intended to provide a bus that can be
associated with a guest-identifiable NUMA node, but is for
machinetypes with PCIe rather than PCI (e.g. q35-based machinetypes).

Aside from PCIe vs. PCI, the other main difference is that a
pci-expander-bus has a companion pci-bridge that is automatically
attached along with it, but pcie-expander-bus has only a single port,
and that port will only connect to a pcie-root-port, or to a
pcie-switch-upstream-port. In order for the bus to be of any use in
the guest, it must have either a pcie-root-port or a
pcie-switch-upstream-port attached (and one or more
pcie-switch-downstream-ports attached to the
pcie-switch-upstream-port).
2016-04-14 14:00:34 -04:00
Laine Stump
52f3d0a4d2 conf: new pci controller model pci-expander-bus
This is a standard PCI root bus (not a bridge) that can be added to a
440fx-based domain. Although it uses a PCI slot, this is *not* how it
is connected into the PCI bus hierarchy, but is only used for
control. Each pci-expander-bus provides 32 slots (0-31) that can
accept hotplug of standard PCI devices.

The usefulness of pci-expander-bus relative to a pci-bridge is that
the NUMA node of the bus can be specified with the <node> subelement
of <target>. This gives guest-side visibility to the NUMA node of
attached devices (presuming that management apps only assign a device
to a bus that has a NUMA node number matching the node number of the
device on the host).

Each pci-expander-bus also has a "busNr" attribute. The expander-bus
itself will take the busNr specified, and all buses that are connected
to this bus (including the pci-bridge that is automatically added to
any expander bus of model "pxb" (see the next commit)) will use
busNr+1, busNr+2, etc, and the pci-root (or the expander-bus with next
lower busNr) will use bus numbers lower than busNr.
2016-04-14 14:00:34 -04:00
Laine Stump
5863b6e0c1 schema: allow pci address attributes to be in decimal
This is especially useful for "bus", since the bus of a device's pci
address is matched to the "index" of a controller to determine which
bus it will be connected to, and "index" is always specified in
decimal - being able to specify both in decimal at least makes it
easier to assure a device is being assigned to the correct bus when it
is added. For the other attributes, it is just a convenience.

(MB: the parser already allows for any of these attributes to be given
in decimal, and there are even examples floating around on the
internet that give them in decimal rather than hex (written in the
days before virsh did schema validation on all XML). This only updates
the schema to match the parser.)
2016-04-14 14:00:33 -04:00
Laine Stump
8995ad1179 schema: new basic type - uint16
This is a number between 0 and 65535 (or 0x0000 - 0xffff if specified
in hexadecimal).
2016-04-14 14:00:33 -04:00
Laine Stump
f97a03e70c schema: rename uint8range/uint24range to uint8/uint24
nwfilter.rng defines uint16range and uint32range, but in a different
manner (it also allows a variable name as the value, rather than just
a decimal or hex number). I wanted to add uint16range to
basictypes.rng, but my desired definition was parallel to those for
uint8range and uint24range which are defined in basictypes.rng - they
*don't* allow a variable name for the value.

The simplest path to make everyone happy is to make the "plain"
versions in basictypes.rng have simpler names - "uint8", "uint16", and
"uint24". This patch renames uint8range and uint24range to uint8 and
uint24, while the next patch will add uint16.
2016-04-14 14:00:33 -04:00
Laine Stump
51156bcff3 schema: make pci slot and function optional
The pcie-switch-downstream-port and pcie-root-port controllers have
only a single slot, numbered 0, and the greate majority of all guest
PCI devices are plugged into function 0 of whatever slot they're
using. The parser makes these optional, setting them to 0 when not
specified, and it's logical for the schema to also make them optional.
2016-04-14 14:00:33 -04:00
Vasiliy Tolstov
690969af9c libvirt domain xml allow to set peer address
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
2016-04-07 18:23:01 +01:00
Qiaowei Ren
afe833e9bd perf: add new xml element
This patch adds new xml element, and so we can have the option of
also having perf events enabled immediately at startup.

Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-6-git-send-email-qiaowei.ren@intel.com
2016-03-29 13:13:05 +01:00
Maxim Nestratov
7068b56c85 conf: qemu: Add support for more HyperV Enlightenment features
This patch adds support for "vpindex", "runtime", "synic",
"stimer", and "vendor_id" features available in qemu 2.5+.

- When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX
to get virtual processor ID.

- Hyper-V "runtime" enlightement feature allows to use MSR
HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes
running guest code, as well as the time the hypervisor spends running
code on behalf of that guest.

- Hyper-V "synic" stands for Synthetic Interrupt Controller, which is
lapic extension controlled via MSRs.

- Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support.
Guest can setup and use fired by host events (SynIC interrupt and
appropriate timer expiration message) as guest clock events

- Hyper-V "reset" allows guest to reset VM.

- Hyper-V "vendor_id" exposes hypervisor vendor id to guest.

Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-03-28 13:10:18 -04:00
Bjoern Walk
a243316ac6 conf: node_device: fix up SCSI target
When reading in an XML definition for a SCSI target device, the name
property of struct scsi_target refers to the @target element.

Let's fix this obvious typo and also extend the XML schema to provide
validation.

Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
2016-03-21 12:06:49 -04:00
Jim Fehlig
9d243e0895 conf: add 'state' attribute to <hap> feature
Most hypervisors use Hardware Assisted Paging by default and don't
require specifying the feature in domain conf. But some hypervisors
support disabling HAP on a per-domain basis. To enable HAP by default
yet provide a knob to disable it, extend the <hap> feature with a
'state=on|off' attribute, similar to <pvspinlock> and <vmport> features.

In the absence of <hap>, the hypervisor default (on) is used. <hap>
without the state attribute would be the same as <hap state='on'/> for
backwards compatibility. And of course <hap state='off'/> disables hap.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-03-21 09:28:17 -06:00
Martin Kletzander
d77ffb6876 nodedev: Expose PCI header type
If we expose this information, which is one byte in every PCI config
file, we let all mgmt apps know whether the device itself is an endpoint
or not so it's easier for them to decide whether such device can be
passed through into a VM (endpoint) or not (*-bridge).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-03-18 17:35:06 +01:00
Jim Fehlig
885e34c916 schema: support 'default' cache mode
The docs claims the cache attribute of the disk <driver>
element supports 'default' as one of its permissible values,
but such configuration fails virt-xml-validate. Add 'default'
as one of the cache attribute choices in domaincommon.rng.
2016-03-14 08:06:15 -06:00
Daniel P. Berrange
00ce10c700 conf: allow use of a logfile with chardev backends
Extend the chardev source XML so that there is a new optional
<log/> element, which is applicable to all character device
backend types. For example, to log output of a TCP backed
serial port

    <serial type='tcp'>
      <source mode='connect' host='127.0.0.1' service='9999'/>
      <protocol type='raw'/>
      <log file='/var/log/libvirt/qemu/demo-serial0.log' append='on'/>
      <target port='0'/>
    </serial>

Not all hypervisors will support use of logfiles.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-10 15:33:17 +00:00
Alexander Burluka
55ecdae0fb Add global quota parameter necessary definitions
This parameter controls the maximum bandwidth to be used
within a period for whole domain.

Signed-off-by: Alexander Burluka <aburluka@virtuozzo.com>
2016-03-01 14:29:06 +00:00
Alexander Burluka
4d92d58f2c Add global period definitions
This parameter represents top level period cgroup
that limits whole domain enforcement period for a quota

Signed-off-by: Alexander Burluka <aburluka@virtuozzo.com>
2016-03-01 14:29:06 +00:00
Pavel Hrdina
b4a5fd95f7 qemu: introduce vram64 attribute for QXL video device
This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory.  It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar.  If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-03-01 14:17:09 +01:00
Marc-André Lureau
937ebba00e qemu: add spice opengl support
Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.

Add a qemuxml2argv test for virtio-gpu + spice with virgl.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-03-01 09:45:47 +01:00
Andrea Bolognani
2a7b11eafb schema: List allowed GIC versions
This change allows to use "host" as a GIC version in the domain XML.

Since we'll need to update the virGICVersion enumeration to support
new GIC versions anyway, it makes sense to be a bit more strict in
the schema as well and reject values that are not in the enumeration.
2016-02-16 14:58:58 +01:00
John Ferlan
4f84617078 conf: Add storage pool device attribute part_separator
Add a new storage pool source device attribute 'part_separator=[yes|no]'
in order to allow a 'disk' storage pool using a device mapper multipath
device to not add the "p" partition separator to the generated device
name when libvirt_parthelper is run.

This will allow libvirt to find device mapper multipath devices which were
configured in /etc/multipath.conf to use 'user_friendly_names' or custom
'alias' names for the LUN.
2016-01-19 13:02:59 -05:00
Dmitry Andreev
7bf3198df6 conf: introduce 'autodeflate' attribute for memballoon device
Excessive memory balloon inflation can cause invocation of OOM-killer,
when Linux is under severe memory pressure. QEMU memballoon device
has a feature to release some memory at the last moment before some
process will be get killed by OOM-killer.

Introduce a new optional balloon device attribute 'autodeflate' to
enable or disable this feature.
2016-01-12 10:48:21 -05:00
Cole Robinson
f7d0f12407 build: Kill docs/schemas/Makefile.am
Move the logic to docs/Makefile.am, and simplify it with a wildcard
expression.
2016-01-11 11:45:14 -05:00
Ján Tomko
b4e0549feb schema: interleave domain name and uuid with other elements
Allow <name> and <uuid> anywhere under <domain>, not just at the top:

error:XML document failed to validate against schema: Unable to validate
doc against /usr/share/libvirt/schemas/domain.rng
Expecting an element name, got nothing
Invalid sequence in interleave
Element domain failed to validate content

Introduced with the first RelaxNG schema in commit c642103.

https://bugzilla.redhat.com/show_bug.cgi?id=1292131
2016-01-05 13:21:09 +01:00
Dmitry Mishin
70ffa02fc2 conf: Add new 'append' attribute for chardevs with file source
Currently, there is no possibility for user to specify desired behaviour of
output to file - truncate or append. This patch adds an ability to explicitly
specify that user wants to preserve file's content on reopen.

Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
2015-12-24 14:50:31 +00:00
Peter Krempa
e5fac00946 schema: Allow > UINT_MAX KiB of memory for NUMA nodes
Using more than 4TiB of memory per NUMA node would not be possible to
express in the XML without violating the schema. Not that such boxes
would be common, but we should use a longer type at this point.

The pattern is not necessary since libvirt redefines the type already in
basictypes.rng with the same pattern.
2015-12-04 15:21:20 +01:00
Ján Tomko
1a538a07c7 conf: add XML for input device passthrough
Add xml for the new virtio-input-host-pci device:
<input type='passthrough' bus='virtio'>
  <source evdev='/dev/input/event1234'/>
</input>

https://bugzilla.redhat.com/show_bug.cgi?id=1231114
2015-11-30 12:29:03 +01:00
Ján Tomko
bebdfafb2b conf: parse and format virtio input bus in domain XML
To be used by the family of virtio input devices:

<input type='mouse' bus='virtio'/>
<input type='tablet' bus='virtio'/>
<input type='keyboard' bus='virtio'/>

https://bugzilla.redhat.com/show_bug.cgi?id=1231114
2015-11-30 12:22:06 +01:00
Marc-André Lureau
21373feb4e qemu: add virtio video device
qemu 2.5 provides virtio video device.  It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.

Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176

Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-11-27 16:48:53 +01:00
Ján Tomko
7ec235ed09 schema: use a better regex for listen addresses
A domain with '::' as the listen address fails to validate.

Reuse the 'ipAddr' and 'dnsName' regexes from basictypes instead
of reinventing them.

https://bugzilla.redhat.com/show_bug.cgi?id=1285665
2015-11-26 11:05:18 +01:00
Dmitry Andreev
59fc0d0609 Allow multiple panic devices
'model' attribute was added to a panic device but only one panic
device is allowed. This patch changes panic device presence
from 'optional' to 'zeroOrMore'.
2015-11-25 14:46:21 +01:00
Dmitry Andreev
658ec27fe8 conf: add 'model' attribute for panic device with values isa, pseries, hyperv
Libvirt already has two types of panic devices - pvpanic and pSeries firmware.
This patch introduces the 'model' attribute and a new type of panic device.

'isa' model is for ISA pvpanic device.
'pseries' model is a default value for pSeries guests.
'hyperv' model is the new type. It's used for Hyper-V crash.

Schema and docs are updated for the new attribute.
2015-11-25 12:19:55 +01:00
Peter Krempa
83707dc87e conf: Prepare making memory device target node optional
Adjust the config code so that it does not enforce that target memory
node is specified. To avoid breakage, adjust the qemu memory hotplug
config checker to disallow such config for now.
2015-11-18 10:32:18 +01:00
Jonathan Toppins
5c668a78d8 qemu: add udp interface support
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.

The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.

<interface type='udp'>
  <mac address='52:54:00:5c:67:56'/>
  <source address='127.0.0.1' port='11112'>
    <local address='127.0.0.1' port='22222'/>
  </source>
  <model type='virtio'/>
  <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>

QEMU call:
	-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222

Notice the xml "local" entry becomes the "localaddr" for the qemu call.

reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html

Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-09-02 10:17:50 +02:00
ik.nitk
c27553b6e2 lxc: Inherit namespace feature
This patch adds feature for lxc containers to inherit namespaces.
This is very similar to what lxc-tools or docker provides.  Look
for "man lxc-start" and you will find that you can pass command
args as [ --share-[net|ipc|uts] name|pid ]. Or check out docker
networking option in which you can give --net=container:NAME_or_ID
as an option for sharing +namespace.

>From this patch you can add extra libvirt option to share
namespace in following way.

 <lxc:namespace>
   <lxc:sharenet type='netns' value='red'/>
   <lxc:shareipc type='pid' value='12345'/>
   <lxc:shareuts type='name' value='container1'/>
 </lxc:namespace>

The netns option is specific to sharenet. It can be used to
inherit from existing network namespace.

Co-authored: Daniel P. Berrange <berrange@redhat.com>
2015-08-26 11:28:30 +01:00
Sergey Bronnikov
4076d30f85 docs: Rename 'parallels' to 'vz'
Parallels driver was renamed to Virtuozzo. Replace old name by new
one for libvirt docs and schemas.
2015-08-25 07:21:33 -04:00
Martin Kletzander
35eecddee3 conf: Add ioeventfd option for controllers
This will be used with a virtio-scsi controller later on.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-10 15:05:34 +02:00
Laine Stump
76379a6ec1 conf: new pcie-controller model "pcie-switch-downstream-port"
This controller can be connected only to a port on a
pcie-switch-upstream-port. It provides a single hotpluggable port that
will accept any PCI or PCIe device, as well as any device requiring a
pcie-*-port (the only current example of such a device is the
pcie-switch-upstream-port).
2015-08-09 22:30:47 -04:00
Laine Stump
38ea9515af conf: new pci controller model "pcie-switch-upstream-port"
This controller can be connected only to a pcie-root-port or a
pcie-switch-downstream-port (which will be added in a later patch),
which is the reason for the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_PORT. A pcie-switch-upstream-port provides
32 ports (slot=0 to slot=31) on the downstream side, which can only
have pci controllers of model "pcie-switch-downstream-port" plugged
into them, which is the reason for the other new connect type
VIR_PCI_CONNECT_TYPE_PCIE_SWITCH.
2015-08-09 22:12:29 -04:00
Laine Stump
dce3b8beb3 conf: new pci controller model "pcie-root-port"
This controller can be connected (at domain startup time only - not
hotpluggable) only to a port on the pcie root complex ("pcie-root" in
libvirt config), hence the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_ROOT. It provides a hotpluggable port that
will accept any PCI or PCIe device.

New attributes must be added to the controller <target> subelement for
this - chassis and port are guest-visible option values that will be
set by libvirt with values derived from the controller's index and pci
address information.
2015-08-09 21:52:52 -04:00
Laine Stump
8dc88aeed6 conf: add new <target> subelement with chassisNr attribute to <controller>
There are some configuration options to some types of pci controllers
that are currently automatically derived from other parts of the
controller's configuration. For example, in qemu a pci-bridge
controller has an option that is called "chassis_nr"; up until now
libvirt has always set chassis_nr to the index of the pci-bridge. So
this:

  <controller type='pci' model='pci-bridge' index='2'/>

will always result in:

  -device pci-bridge,chassis_nr=2,...

on the qemu commandline. In the future we may decide there is a better
way to derive that option, but even in that case we will need for
existing domains to retain the same chassis_nr they were using in the
past - that is something that is visible to the guest so it is part of
the guest ABI and changing it would lead to problems for migrating
guests (or just guests with very picky OSes).

The <target> subelement has been added as a place to put the new
"chassisNr" attribute that will be filled in by libvirt when it
auto-generates the chassisNr; it will be saved in the config, then
reused any time the domain is started:

  <controller type='pci' model='pci-bridge' index='2'>
    <model type='pci-bridge'/>
    <target chassisNr='2'/>
  </controller>

The one oddity of all this is that if the controller configuration
is changed (for example to change the index or the pci address
where the controller is plugged in), the items in <target> will
*not* be re-generated, which might lead to conflict. I can't
really see any way around this, but fortunately if there is a
material conflict qemu will let us know and we will pass that on
to the user.
2015-08-09 21:35:00 -04:00
Laine Stump
bf20251048 conf: add new <model> subelement with name attribute to <controller>
This new subelement is used in PCI controllers: the toplevel
*attribute* "model" of a controller denotes what kind of PCI
controller is being described, e.g. a "dmi-to-pci-bridge",
"pci-bridge", or "pci-root". But in the future there will be different
implementations of some of those types of PCI controllers, which
behave similarly from libvirt's point of view (and so should have the
same model), but use a different device in qemu (and present
themselves as a different piece of hardware in the guest). In an ideal
world we (i.e. "I") would have thought of that back when the pci
controllers were added, and used some sort of type/class/model
notation (where class was used in the way we are now using model, and
model was used for the actual manufacturer's model number of a
particular family of PCI controller), but that opportunity is long
past, so as an alternative, this patch allows selecting a particular
implementation of a pci controller with the "name" attribute of the
<model> subelement, e.g.:

  <controller type='pci' model='dmi-to-pci-bridge' index='1'>
    <model name='i82801b11-bridge'/>
  </controller>

In this case, "dmi-to-pci-bridge" is the kind of controller (one that
has a single PCIe port upstream, and 32 standard PCI ports downstream,
which are not hotpluggable), and the qemu device to be used to
implement this kind of controller is named "i82801b11-bridge".

Implementing the above now will allow us in the future to add a new
kind of dmi-to-pci-bridge that doesn't use qemu's i82801b11-bridge
device, but instead uses something else (which doesn't yet exist, but
qemu people have been discussing it), all without breaking existing
configs.

(note that for the existing "pci-bridge" type of PCI controller, both
the model attribute and <model> name are 'pci-bridge'. This is just a
coincidence, since it turns out that in this case the device name in
qemu really is a generic 'pci-bridge' rather than being the name of
some real-world chip)
2015-08-09 21:29:27 -04:00
Boris Fiuczynski
b831c5b801 Support for the new watchdog model diag288
This patch provides support for the new watchdog model "diag288".

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
2015-06-24 15:26:31 +02:00
Boris Fiuczynski
1238dc29af Support for a new watchdog action inject-nmi
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
2015-06-24 15:26:31 +02:00
John Ferlan
f153832266 docs: Adjust Disk storage rng
Currently the grammar uses "none" for a "valid" Disk Storage Pool
format type; however, virStoragePoolFormatDisk uses "unknown" so
virt-xml-validate will fail to validate when "unknown" is found
2015-06-23 09:25:24 -04:00
Eric Farman
c733e97323 docs: Fix XML schema handling of LUN address in hostdev tag
Defining a domain with a SCSI disk attached via a hostdev
tag and a source address unit value longer than two digits
causes an error when editing the domain with virsh edit,
even if no changes are made to the domain definition.
The error suggests invalid XML, somewhere:

  # virsh edit lmb_guest
  error: XML document failed to validate against schema:
  Unable to validate doc against /usr/local/share/libvirt/schemas/domain.rng
  Extra element devices in interleave
  Element domain failed to validate content

The virt-xml-validate tool fails with a similar error:

  # virt-xml-validate lmb_guest.xml
  Relax-NG validity error : Extra element devices in interleave
  lmb_guest.xml:17: element devices: Relax-NG validity error :
  Element domain failed to validate content
  lmb_guest.xml fails to validate

The hostdev tag requires a source address to be specified,
which includes bus, target, and unit address attributes.
According to the SCSI Architecture Model spec (section
4.9 of SAM-2), a LUN address is 64 bits and thus could be
up to 20 decimal digits long.  Unfortunately, the XML
schema limits this string to just two digits.  Similarly,
the target field can be up to 32 bits in length, which
would be 10 decimal digits.

  # lsscsi -xx
  [0:0:19:0x4022401100000000]  disk    IBM      2107900          3.44 /dev/sda
  # lsscsi
  [0:0:19:1074872354]disk    IBM      2107900          3.44  /dev/sda
  # cat lmb_guest.xml
  <domain type='kvm'>
    <name>lmb_guest</name>
    <memory unit='MiB'>1024</memory>
  ...trimmed...
    <devices>
      <controller type='scsi' model='virtio-scsi' index='0'/>
      <hostdev mode='subsystem' type='scsi'>
        <source>
          <adapter name='scsi_host0'/>
          <address bus='0' target='19' unit='1074872354'/>
        </source>
      </hostdev>
  ...trimmed...

Since the reference unit and target fields are used in
several places in the XML schema, create a separate one
specific for SCSI Logical Units that will permit the
greater length.  This permits both the validation utility
and the virsh edit command to succeed when a hostdev
tag is included.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
2015-06-22 16:15:49 -04:00
Michal Privoznik
a9a27e602c virSysinfo: Introduce SMBIOS type 2 support
https://bugzilla.redhat.com/show_bug.cgi?id=1220527

This type of information defines attributes of a system
baseboard. With one exception: board type is yet not implemented
in qemu so it's not introduced here either.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-18 10:10:26 +02:00
John Ferlan
38c9494878 storage: Fix the schema and add tests for cifs pool
Commit id '887dd362' added support for a netfs pool format type 'cifs'
and 'gluster' in order to add rng support for Samba and glusterfs netfs
pools. Originally, the CIFS type support was added as part of commit
id '61fb6979'. Eventually commit id 'b325be12' fixed the gluster rng
definition to match expectations.

As it turns out the CIFS rng needed a similar change since the directory
path is not an absDirPath, rather just a dirPath will be required.
2015-06-15 17:25:33 -04:00
John Ferlan
785a8940ef scsi: Need to translate disk source pool in config attach path
https://bugzilla.redhat.com/show_bug.cgi?id=1228007

When attaching a scsi volume lun via the attach-device --config or
--persistent options, there was no translation of the source pool
like there was for the live path, thus the attempt to modify the config
would fail since not enough was known about the disk.
2015-06-12 12:20:36 -04:00
James Cowgill
68c0ff3a71 schema: use arch list from basictypes for os arch attribute
I see no reason to duplicate this list of architectures. This also allows
more guest architectures to be used with libvirt (like the mips64el qemu
machine I am trying to run).

Signed-off-by: James Cowgill <james410@cowgill.org.uk>
2015-06-11 16:57:45 +02:00
Shivaprasad G Bhat
6a28687b6e conf: fix domaincommon.rng to accept network name with quotes
The network name is currently of type "deviceName" but it should be
"text" as name is defined in the network.rng.

Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
2015-06-09 13:55:54 -04:00
Cole Robinson
7c2d65dde2 storage: conf: Don't set any default <mode> in the XML
The XML parser sets a default <mode> if none is explicitly passed in.
This is then used at pool/vol creation time, and unconditionally reported
in the XML.

The problem with this approach is that it's impossible for other code
to determine if the user explicitly requested a storage mode. There
are some cases where we want to make this distinction, but we currently
can't.

Handle <mode> parsing like we handle <owner>/<group>: if no value is
passed in, set it to -1, and adjust the internal consumers to handle
it.
2015-05-25 20:52:55 -04:00
Laine Stump
ba5566e80f interface: allow multiple IPv4 addresses + dhcp on a single interface
As of netcf-0.2.8, netcf supports configuring multipl IPv4 addresses,
as well as simultaneously configuring dhcp and static IPv4 addresses,
on a single interface. This patch updates libvirt's interface.rng to
allow such configurations.

This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1223688
2015-05-22 10:14:01 -04:00
Cole Robinson
c4d27bdddf storage: conf: Don't output owner/group -1
-1 is just an internal placeholder and is meaningless to output in the XML.
2015-05-21 15:00:52 -04:00
Michal Privoznik
335b834d95 Introduce pci-serial
https://bugzilla.redhat.com/show_bug.cgi?id=998813

Like usb-serial, the pci-serial device allows a serial device to be
attached to PCI bus. An example XML looks like this:

  <serial type='dev'>
    <source path='/dev/ttyS2'/>
    <target type='pci-serial' port='0'/>
    <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
  </serial>

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-05-21 17:49:02 +02:00
Tony Krowiak
73eda71028 libvirt: Introduce protected key mgmt ops
Two new domain configuration XML elements are added to enable/disable
the protected key management operations for a guest:

    <domain>
      ...
      <keywrap>
        <cipher name='aes|dea' state='on|off'/>
      </keywrap>
      ...
    </domain>

Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-05-18 09:53:13 +02:00
Michal Privoznik
921c52b0db Introduce GIC feature
Some platforms, like aarch64, don't have APIC but GIC. So there's
no reason to have <apic/> feature turned on. However, we are
still missing <gic/> feature. This commit introduces the feature
to XML parser and formatter, adds documentation and updates RNG
schema.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-05-05 09:45:43 +02:00
Marc-André Lureau
208abbcbd7 docs: add domain vmport feature
A new feature that can be turned on or off.

The QEMU machine vmport option allows to set the VMWare IO port
emulation. This emulation is useful for absolute pointer input when the
guest has vmware input drivers, and is enabled by default for kvm.

However it is unnecessary for Spice-enabled VM, since the agent already
handles absolute pointer and multi-monitors. Furthermore, it prevents
Spice from switching to relative input since the regular ps/2 pointer
driver is replaced by the vmware driver. It is thus advised to disable
vmport when using a Spice VM. This will permit the Spice client to
switch from absolute to relative pointer, as it may be required for
certain games or applications.
2015-05-04 13:19:38 +02:00
Cole Robinson
066f7c7c3a domain: conf: Drop unused OSTYPE_AIX
The phyp driver stuffed it into a DomainDefPtr during its attachdevice
routine, but the value is never advertised via capabilities so it should
be safe to drop.

Have the phyp driver use OSTYPE_LINUX, which is what it advertises via
capabilities.
2015-04-29 09:42:26 -04:00
John Ferlan
93383c1ffa conf: Add new domain XML element 'iothreadids'
Adding a new XML element 'iothreadids' in order to allow defining
specific IOThread ID's rather than relying on the algorithm to assign
IOThread ID's starting at 1 and incrementing to iothreads count.

This will allow future patches to be able to add new IOThreads by
a specific iothread_id and of course delete any exisiting IOThread.

Each iothreadids element will have 'n' <iothread> children elements
which will have attribute "id".  The "id" will allow for definition
of any "valid" (eg > 0) iothread_id value.

On input, if any <iothreadids> <iothread>'s are provided, they will
be marked so that we only print out what we read in.

On input, if no <iothreadids> are provided, the PostParse code will
self generate a list of ID's starting at 1 and going to the number
of iothreads defined for the domain (just like the current algorithm
numbering scheme).  A future patch will rework the existing algorithm
to make use of the iothreadids list.

On output, only print out the <iothreadids> if they were read in.
2015-04-27 12:36:35 -04:00
Daniel P. Berrange
615bdfda07 rng: fix port number range validation
The PortNumber data type is declared to derive from 'short'.
Unfortunately this is an signed type, so validates the range
[-32,768, 32,767] which excludes valid port numbers between
32767 and 65535.

We can't use 'unsignedShort', since we need -1 to be a valid
port number too.

This change is to use 'int' and set an explicit max boundary
instead of relying on the data types' built-in max.

One of the existing tests is changed to use a high port number
to validate the schema.

https://bugzilla.redhat.com/show_bug.cgi?id=1214664

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-04-23 12:59:52 +01:00
Erik Skultety
749ebfd8f8 rng: Move sgio attr definition to a separate block
it might be worth having sgio attribute defined in a separate block the same way
as rawio attribute.
2015-04-20 10:13:36 +02:00
Erik Skultety
cea1b86fa7 rng: Forbid to validate mismatched <disk> 'device' and 'type' attributes
According to docs, using 'lun' as a value for device attribute is only valid
with disk types 'block' and 'network'. However current RNG schema also allows
a combination type='file' device='lun' which results in a successfull
xml validation, but fails at qemuBuildCommandLine.
Besides fixing the RNG schema, this patch also adds a qemuxml2argvtest
for this case.

https://bugzilla.redhat.com/show_bug.cgi?id=1210669
2015-04-20 10:04:06 +02:00
Martin Kletzander
450a59ba56 schema: Allow multiple machines for VMs and unite architectures
Use the same pattern for all machine types on all archs and same archs
for hvm and exe types.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-04-17 15:30:06 +02:00
Michal Privoznik
7cf87f750b RNG schema: allow plain @floor to <bandwidth/>
The <inbound/> element to <bandwidth/> has several attributes from
which two are mandatory. Well, from two at least one has to be
present: @average or @floor or both. Instead of inventing crazy RNG
schema, let's make all the attributes optional there and rely on our
parsing code to correctly handle the situation.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-04-16 09:07:43 +02:00
Laine Stump
f2ab1b9e24 interface: allow multiple IPv4 addresses in interface XML
An upcoming netcf release will support multiple ipv4 addresses, so
let's loosen up libvirt's interface.rng to allow it.
2015-04-06 13:27:15 -04:00
Eric Blake
dfc708750b relaxng: allow : in /dev/disk/by-path names
On IRC, Hydrar pointed a problem where 'virsh edit' failed on
his domain created through an ISCSI pool managed by virt-manager,
all because the XML included a block device with colons in the
name.

* docs/schemas/basictypes.rng (absFilePath): Add colon as safe.
* tests/qemuxml2argvdata/qemuxml2argv-disk-iscsi.xml: New file.
* tests/qemuxml2argvdata/qemuxml2argv-disk-iscsi.args: Likewise.
* tests/qemuxml2argvtest.c (mymain): Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-03-26 16:57:26 -06:00
Guido Günther
db1edae895 Don't validata filesystem target type
When using QEMU's 9pfs the target "dir" element is not necessarily an
absolute path but merely an arbitrary identifier. So validation in that
case currently fails with the misleading

   $ virt-xml-validate /tmp/test.xml
   Relax-NG validity error : Extra element devices in interleave
   /tmp/test.xml:24: element devices: Relax-NG validity error : Element domain failed to validate content
   /tmp/test.xml fails to validate
2015-03-25 15:15:17 +01:00
Peter Krempa
3e4230d270 conf: Add interface to parse and format memory device information
This patch adds code that parses and formats configuration for memory
devices.

A simple configuration would be:
<memory model='dimm'>
  <target>
    <size unit='KiB'>524287</size>
    <node>0</node>
  </target>
</memory>

A complete configuration of a memory device:
<memory model='dimm'>
  <source>
    <pagesize unit='KiB'>4096</pagesize>
    <nodemask>1-3</nodemask>
  </source>
  <target>
    <size unit='KiB'>524287</size>
    <node>1</node>
  </target>
</memory>

This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
2015-03-23 14:25:15 +01:00
Peter Krempa
62b825a2d0 conf: Add device address type for dimm devices
Dimm devices are described by the slot and base address. Add a new
address type to be able to describe such address.
2015-03-23 14:25:15 +01:00
Peter Krempa
bffb9163a1 conf: Add support for parsing and formatting max memory and slot count
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.

To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
2015-03-23 14:25:14 +01:00
Martin Kletzander
0e7457e501 Fix common misspellings
Wikipedia's list of common misspellings [1] has a machine-readable
version.  This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched.  The list of changes was manually re-checked for false
positives.

[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-03-23 09:01:30 +01:00
Antoni Segura Puimedon
a9fbe3b157 docs: schema and docs for the midonet virtualport type
Midonet is an opensource virtual networking that over lays the IP
network between hypervisors. Currently, such networks can be made
with the openvswitch virtualport type.

This patch, defines the schema and documentation that will serve
as basis for the follow up patches that will add support to libvirt
for using Midonet virtual ports for its interfaces. The schema
definition requires that the port profile expresses its interfaceid
as part of the port profile. For that reason, this is part of the
patch too.

Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
2015-03-17 13:09:05 -04:00
Martin Kletzander
02ce97bca6 conf: Reorder elements inside memballoon
All the devices we have format their address as its last sub-element, so
let's change memballoon to follow suit.  Also adjust RNG to allow any
order of them so 'virsh edit' doesn't shout at us.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-03-17 12:03:33 +01:00
Peter Krempa
4bca6192f2 conf: Make specifying <memory> optional
Now that the size of guest's memory can be inferred from the NUMA
configuration (if present) make it optional to specify <memory>
explicitly.

To make sure that memory is specified add a check that some form of
memory size was specified. One side effect of this change is that it is
no longer possible to specify 0KiB as memory size for the VM, but I
don't think it would be any useful to do so. (I can imagine embedded
systems without memory, just registers, but that's far from what libvirt
is usually doing).

Forbidding 0 memory for guests also fixes a few corner cases where 0 was
not interpreted correctly and caused failures. (Arguments for numad when
using automatic placement, size of the balloon). This fixes problems
described in https://bugzilla.redhat.com/show_bug.cgi?id=1161461

Test case changes are added to verify that the schema change and code
behave correctly.
2015-03-16 14:32:20 +01:00
Michal Privoznik
6cc5080a09 RNG: Allow multiple parameters to be passed to an interface filter
Our code supports that for ages. When using a <filterref/> to an
<interface/> several parameters can be passed to the filter. Later,
when building firewall rules, parameters are substituted for their
values. However, our RNG schema allowed only one parameter to be
passed.

Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-11 09:54:29 +01:00
Michal Privoznik
5aee81a0cb qemu: Allow spaces in disk serial
https://bugzilla.redhat.com/show_bug.cgi?id=1195660

There's been a bug report appearing on the qemu-devel list, that
libvirt is unable to pass spaces in disk serial number [1]. Not only
our RNG schema forbids that, the code is not prepared either. However,
with a bit of escaping (if needed) we can allow spaces there.

1: https://lists.gnu.org/archive/html/qemu-devel/2015-02/msg04041.html

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-03-05 13:35:55 +01:00
James Chapman
c9027d8f44 SRIOV NIC offload feature discovery
Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features

Here is an example of the feature XML definition:

<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
  <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
  <parent>pci_0000_08_00_1</parent>
  <capability type='net'>
    <interface>eth4</interface>
    <address>90:e2:ba:5e:a5:45</address>
    <link speed='10000' state='up'/>
    <feature name='rx'/>
    <feature name='tx'/>
    <feature name='sg'/>
    <feature name='tso'/>
    <feature name='gso'/>
    <feature name='gro'/>
    <feature name='rxvlan'/>
    <feature name='txvlan'/>
    <feature name='rxhash'/>
    <capability type='80203'/>
  </capability>
</device>

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-03-05 11:31:05 +01:00
Prerna Saxena
0afa6be815 RNG: Add 'ppc64le' arch and newer pseries-2.* machine types
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
2015-03-03 10:57:18 +01:00
Peter Krempa
8eb907b8d0 schema: Fix interface link state schema
In commit edd1295e1d I've introduced an
XML element that allows to configure state of the network interface
link. Somehow the RNG schema hunk ended up in a weird place in the
network schema definition. Move it to the right place and add a test
case.

Note that the link state is set up via the monitor at VM startup so I
originally didn't think of adding a test case.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1173468
2015-03-03 09:43:13 +01:00
Peter Krempa
18f9f69bb5 schema: Allow interleaving the /domain/os/type element
The element wasn't declared under the interleave thus it was required
always to be first. This made it inconvenient when pasting new stuff to
the XML manually in the "wrong" place.
2015-02-25 17:04:09 +01:00
Martin Kletzander
3e4b783e1e schema: Add virtio-mmio address type into RNG
The "virtio-mmio" is perfectly valid address type which we parse and
format correctly, but it's missing in our RNG schemas, hence editing a
domain with device having such address fails the validation.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-02-25 11:23:45 +01:00
Marek Marczykowski
c374353ca0 conf: support backend domain name in disk and network devices
At least Xen supports backend drivers in another domain (aka "driver
domain"). This patch introduces an XML config option for specifying the
backend domain name for <disk> and <interface> devices.  E.g.

  <disk>
    <backenddomain name='diskvm'/>
    ...
  </disk>
  <interface type='bridge'>
    <backenddomain name='netvm'/>
    ...
  </interface>

In the future, same option will be needed for USB devices (hostdev
objects), but for now libxl doesn't have support for PVUSB.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
2015-02-20 14:50:24 -07:00
Ján Tomko
6067182b0d Add mrg_rxbuf option to virtio interfaces
Add an XML attribute to allow disabling merge of rx buffers
on the host:
<interface ...>
  ...
  <model type='virtio'/>
  <driver ...>
    <host mrg_rxbuf='off'/>
  </driver>
</interface>

https://bugzilla.redhat.com/show_bug.cgi?id=1186886
2015-02-13 12:31:38 +01:00
Martin Kletzander
8680ea9749 docs, schema, conf: Add support for setting scheduler parameters of guest threads
In order for QEMU vCPU (and other) threads to run with RT scheduler,
libvirt needs to take care of that so QEMU doesn't have to run privileged.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178986

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-02-11 17:30:06 +01:00
Erik Skultety
862bbf8a5a schema: allow multiple seclabel for devices in domaincommon.rng
In our RNG schema we do allow multiple (different) seclabels per-domain,
but don't allow this for devices, yet we neither have a check in our XML parser,
nor in a post-parse callback. In that case we should allow multiple
(different) seclabels for devices as well.
2015-02-11 09:41:36 +01:00
Michal Privoznik
5222256849 schemas: Allow all generic elements and attributes for all interfaces
There are some interface types (notably 'server' and 'client')
which instead of allowing the default set of elements and
attributes (like the rest do), try to enumerate only the elements
they know of. This way it's, however, easy to miss something. For
instance, the <address/> element was not mentioned at all. This
resulted in a strange behavior: when such interface was added
into XML, the address was automatically generated by parsing
code. Later, the formatted XML hasn't passed the RNG schema. This
became more visible once we've turned on the XML validation on
domain XML changes: appending an empty line at the end of
formatted XML (to trick virsh think the XML had changed) made
libvirt to refuse the very same XML it formatted.

Instead of trying to find each element and attribute we are
missing in the schema, lets just allow all the elements and
attributes like we're doing that for the rest of types. It's no
harm if the schema is wider than our parser allows.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-01-29 16:23:15 +01:00
Peter Krempa
6e01534bc0 schemas: Move definition of 'hexuint' to basictypes
Allow reuse of the type.
2015-01-23 13:18:04 +01:00
Ján Tomko
280ece4af9 qemu: format server interface without a listen address
https://bugzilla.redhat.com/show_bug.cgi?id=1130390

The listen address is not mandatory for <interface type='server'>
but when it's not specified, we've been formatting it as:
-netdev socket,listen=(null):5558,id=hostnet0
which failed with:
Device 'socket' could not be initialized

Omit the address completely and only format the port in the listen
attribute.

Also fix the schema to allow specifying a model.
2015-01-21 13:22:36 +01:00
Josh Stone
298fa4858c network: Let domains be restricted to local DNS
This adds a new "localOnly" attribute on the domain element of the
network xml.  With this set to "yes", DNS requests under that domain
will only be resolved by libvirt's dnsmasq, never forwarded upstream.

This was how it worked before commit f69a6b987d, and I found that
functionality useful.  For example, I have my host's NetworkManager
dnsmasq configured to forward that domain to libvirt's dnsmasq, so I can
easily resolve guest names from outside.  But if libvirt's dnsmasq
doesn't know a name and forwards it to the host, I'd get an endless
forwarding loop.  Now I can set localOnly="yes" to prevent the loop.

Signed-off-by: Josh Stone <jistone@redhat.com>
2015-01-20 01:07:18 -05:00
Dmitry Guryanov
c8a6f844c3 add ploop fs driver type
Ploop is a pseudo device which makeit possible to access
to an image in a file as a block device. Like loop devices,
but with additional features, like snapshots, write tracker
and without double-caching.

It used in PCS for containers and in OpenVZ. You can manage
ploop devices and images with ploop utility
(http://git.openvz.org/?p=ploop).

Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2015-01-16 14:07:46 +01:00
Martin Kletzander
199390117c docs, schema, conf: Add support for PMU feature
Just a new feature that can be turned on/off.

https://bugzilla.redhat.com/show_bug.cgi?id=1178853

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-01-16 13:43:46 +01:00
Cédric Bosdonnat
a117652917 Use the network route definitions for domains 2015-01-16 10:14:03 +01:00
Cédric Bosdonnat
2fc7e4a25a Move network route definition to networkcommon.rng
Moving network route to the network common schema will allow reusing it.
2015-01-16 10:14:03 +01:00
Cédric Bosdonnat
4b47b4dc7a Fix ipv6 regex in RNG schemas to match '::' 2015-01-16 10:14:03 +01:00
Martin Kletzander
adff345e1e qemu: Allow enabling/disabling features with host-passthrough
QEMU supports feature specification with -cpu host and we just skip
using that.  Since QEMU developers themselves would like to use this
feature, this patch modifies the code to work.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178850

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-01-13 08:51:01 +01:00
Stefan Berger
3a3b3691d1 nwfilter: Add support for icmpv6 filtering
Make use of the ebtables functionality to be able to filter certain
parameters of icmpv6 packets. Extend the XML parser for icmpv6 types,
type ranges, codes, and code ranges. Extend the nwfilter documentation,
schema, and test cases.

Being able to filter icmpv6 types and codes helps extending the DHCP
snooper for IPv6 and filtering at least some parameters of IPv6's NDP
(Neighbor Discovery Protocol) packets. However, the filtering will not
be as good as the filtering of ARP packets since we cannot
check on IP addresses in the payload of the NDP packets.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2015-01-07 11:41:49 -05:00
Cédric Bosdonnat
c9a641f1e5 Domain network devices can now have a <route> element
Network interfaces devices and host devices with net capabilities can
now have IPv4 and/or an IPv6 routes configured.
2015-01-05 20:24:17 +01:00
Cédric Bosdonnat
2811cc611e Allow network capabilities hostdev to configure IP addresses 2015-01-05 20:24:17 +01:00
Cédric Bosdonnat
aa2cc72100 Domain conf: allow more than one IP address for net devices
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
2015-01-05 20:24:04 +01:00
Martin Kletzander
d2632d60aa storage: unify permission formatting
Volume and pool formatting functions took different approaches to
unspecified uids/gids.  When unknown, it is always parsed as -1, but one
of the functions formatted it as unsigned int (wrong) and one as
int (better).  Due to that, our two of our XML files from tests cannot
be parsed on 32-bit machines.

RNG schema needs to be modified as well, but because both
storagepool.rng and storagevol.rng need same schema for permission
element, save some space by moving it to storagecommon.rng.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-12-16 15:47:56 +01:00
Laine Stump
40961978ee conf: new network bridge device attribute macTableManager
The macTableManager attribute of a network's bridge subelement tells
libvirt how the bridge's MAC address table (used to determine the
egress port for packets) is managed. In the default mode, "kernel",
management is left to the kernel, which usually determines entries in
part by turning on promiscuous mode on all ports of the bridge,
flooding packets to all ports when the correct destination is unknown,
and adding/removing entries to the fdb as it sees incoming traffic
from particular MAC addresses.  In "libvirt" mode, libvirt turns off
learning and flooding on all the bridge ports connected to guest
domain interfaces, and adds/removes entries according to the MAC
addresses in the domain interface configurations. A side effect of
turning off learning and unicast_flood on the ports of a bridge is
that (with Linux kernel 3.17 and newer), the kernel can automatically
turn off promiscuous mode on one or more of the bridge's ports
(usually only the one interface that is used to connect the bridge to
the physical network). The result is better performance (because
packets aren't being flooded to all ports, and can be dropped earlier
when they are of no interest) and slightly better security (a guest
can still send out packets with a spoofed source MAC address, but will
only receive traffic intended for the guest interface's configured MAC
address).

The attribute looks like this in the configuration:

  <network>
    <name>test</name>
    <bridge name='br0' macTableManager='libvirt'/>
    ...

This patch only adds the config knob, documentation, and test
cases. The functionality behind this knob is added in later patches.
2014-12-08 14:41:37 -05:00
Pavel Hrdina
742d49fa17 qemu-command: introduce new vgamem attribute for QXL video device
Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-11-24 22:20:13 +01:00
Peter Krempa
b7d1bee2b9 storage: rbd: Implement support for passing config file option
To be able to express some use cases of the RBD backing with libvirt, we
need to be able to specify a config file for the RBD client to qemu as
that is one of the commonly used options.
2014-11-21 14:37:03 +01:00
Peter Krempa
0255660658 storage: rbd: qemu: Add support for specifying internal RBD snapshots
Some storage systems have internal support for snapshots. Libvirt should
be able to select a correct snapshot when starting a VM.

This patch adds a XML element to select a storage source snapshot for
the RBD protocol which supports this feature.
2014-11-21 14:37:02 +01:00
Peter Krempa
24c25a68c2 conf: Add channel state for virtio channels to the XML
To track state of virtio channels this patch adds a new output-only
attribute called 'state' to the <target> element of virtio channels.

This will be later populated with the guest state of the channel.
2014-11-21 11:00:11 +01:00
John Ferlan
5530f248db storage: Introduce 'managed' for the fchost parent
https://bugzilla.redhat.com/show_bug.cgi?id=1160926

Introduce a 'managed' attribute to allow libvirt to decide whether to
delete a vHBA vport created via external means such as nodedev-create.
The code currently decides whether to delete the vHBA based solely on
whether the parent was provided at creation time. However, that may not
be the desired action, so rather than delete and force someone to create
another vHBA via an additional nodedev-create allow the configuration of
the storage pool to decide the desired action.

During createVport when libvirt does the VPORT_CREATE, set the managed
value to YES if not already set to indicate to the deleteVport code that
it should delete the vHBA when the pool is destroyed.

If libvirtd is restarted all the memory only state was lost, so for a
persistent storage pool, use the virStoragePoolSaveConfig in order to
write out the managed value.

Because we're now saving the current configuration, we need to be sure
to not save the parent in the output XML if it was undefined at start.
Saving the name would cause future starts to always use the same parent
which is not the expected result when not providing a parent. By not
providing a parent, libvirt is expected to find the best available
vHBA port for each subsequent (re)start.

At deleteVport, use the new managed value to decide whether to execute
the VPORT_DELETE.  Since we no longer save the parent in memory or in
XML when provided, if it was not provided, then we have to look it up.
2014-11-12 10:18:28 -05:00
Conrad Meyer
79f370fc4b domaincommon.rng: Add 'bootloader' to os=hvm schema for Bhyve
Additionally, make the <bootloader> tag optional (for bhyveload with
custom arguments) (also, matches the actual parser).
2014-11-12 09:55:22 +01:00
Matthias Gatto
e34ffa96fb qemu: Modify the structure _virDomainBlockIoTuneInfo.
Modify the structure _virDomainBlockIoTuneInfo to support these the new
options.
Change the initialization of the variable expectedInfo in qemumonitorjsontest.c
to avoid compiling problem.
Add documentation about the new xml options

Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
2014-11-10 15:48:59 +01:00
Prerna Saxena
e3c44f0d36 cpu_conf: Allow specification of 'units' for @memory on numa nodes.
CPU numa topology implicitly allows memory specification in 'KiB'.

Enabling this to accept the 'unit' in which memory needs to be specified.
This now allows users to specify memory in units of choice, and
lists the same in 'KiB' -- just like other 'memory' elements in XML.

    <numa>
      <cell cpus='0-3' memory='1024' unit='MiB' />
      <cell cpus='4-7' memory='1024' unit='MiB' />
    </numa>

Also augment test cases to correctly model NUMA memory specification.
This adds the tag 'unit="KiB"' for memory attribute in NUMA cells.

Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-11-10 14:55:45 +01:00
Laine Stump
07450cd429 conf: add trustGuestRxFilters attribute to network and domain interface
This new attribute will control whether or not libvirt will pay
attention to guest notifications about changes to network device mac
addresses and receive filters. The default for this is 'no' (for
security reasons). If it is set to 'yes' *and* the specified device
model and connection support it (currently only macvtap+virtio) then
libvirt will watch for NIC_RX_FILTER_CHANGED events, and when it
receives one, it will issue a query-rx-filter command, retrieve the
result, and modify the host-side macvtap interface's mac address and
unicast/multicast filters accordingly.

The functionality behind this attribute will be in a later patch. This
patch merely adds the attribute to the top-level of a domain's
<interface> as well as to <network> and <portgroup>, and adds
documentation and schema/xml2xml tests. Rather than adding even more
test files, I've just added the net attribute in various applicable
places of existing test files.
2014-10-06 11:49:10 -04:00
Martin Kletzander
540a84ec89 docs, conf, schema: add support for shmem device
This patch adds parsing/formatting code as well as documentation for
shared memory devices.  This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.

In the devices section in the domain XML users may specify:

- For shmem device using a server:

 <shmem name='shmem0'>
   <server path='/tmp/socket-ivshmem0'/>
   <size unit='M'>32</size>
   <msi vectors='32' ioeventfd='on'/>
 </shmem>

- For ivshmem device not using an ivshmem server:

 <shmem name='shmem1'>
   <size unit='M'>32</size>
 </shmem>

Most of the configuration is made optional so it also allows
specifications like:

 <shmem name='shmem1/>
 <shmem name='shmem2'>
   <server/>
 </shmem>

Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-10-03 22:43:08 +02:00
Erik Skultety
1be67cd31b storage: Fix logical pool fmt type
According to our documentation logical pool supports formats 'auto' and
'lvm2'. However, in storage_conf.c we previously defined storage pool
formats: unknown, lvm2. Due to backward compatibility reasons
we must continue refer to pool format type 'unknown' instead of 'auto'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1123767
2014-09-29 05:59:09 -04:00
Ján Tomko
5b3536ae90 conf: add options for disabling segment offloading
Add options for tuning segment offloading:
<driver>
  <host csum='off' gso='off' tso4='off' tso6='off'
        ecn='off' ufo='off'/>
  <guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
which control the respective host_ and guest_ properties
of the virtio-net device.
2014-09-24 16:16:45 +02:00
Jianwei Hu
e1dfb6681a schema: properly set tap and vhost backend attributes optional
Each attribute is optional, commit af8b4a2 forgot to mention that.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-09-22 16:54:26 +02:00
John Ferlan
58abf1bb36 hostdev: Add "rawio" attribute to _virDomainHostdevSubsysSCSI
Add the 'rawio' attribute to match _virDomainDiskDef and process the
hostdev XML similarly to the disk XML for a lun which supports/requires rawio
2014-09-19 07:47:46 -04:00
Roman Bogorodskiy
b4af40226d storage: zfs: implement pool build and delete
- Provide an implementation for buildPool and deletePool operations
   for the ZFS storage backend.
 - Add VIR_STORAGE_POOL_SOURCE_DEVICE flag to ZFS pool poolOptions
   as now we can specify devices to build pool from
 - storagepool.rng: add an optional 'sourceinfodev' to 'sourcezfs' and
   add an optional 'target' to 'poolzfs' entity
 - Add a couple of tests to storagepoolxml2xmltest
2014-09-18 18:08:29 +04:00
Michal Privoznik
f05b6a918e domaincaps: Expose UEFI binary path, if it exists
Check to see if the UEFI binary mentioned in qemu.conf actually
exists, and if so expose it in domcapabilities like

<loader ...>
  <value>/path/to/ovmf</value>
</loader>

We introduce some generic domcaps infrastructure for handling
a dynamic list of string values, it may be of use for future bits.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-17 16:29:49 +02:00
Martin Kletzander
def6b35989 docs, conf, schema: add support for shared memory mapping
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-09-17 16:10:26 +02:00
Martin Kletzander
f864aac90b schemas: finish virTristate{Bool,Switch} transition
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-09-17 16:10:26 +02:00
Michal Privoznik
4f76621c0e domaincaps: Expose UEFI capability
As of 542899168c we learned libvirt to use UEFI for domains.
However, management applications may firstly query if libvirt
supports it. And this is where virConnectGetDomainCapabilities()
API comes handy.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-17 09:42:33 +02:00
Ján Tomko
af8b4a2e6f conf: add backend element to interfaces
For tuning the network, alternative devices
for creating tap and vhost devices can be specified via:
<backend tap='/dev/net/tun' vhost='/dev/net-vhost'/>
2014-09-16 15:38:34 +02:00
Eric Blake
7e8feed4a7 cputune: allow interleaved xml
I noticed this with the recent iothread pinning code, but the
problem existed longer than that. The XML validation required
users to supply <cputune> children in a strict order, even though
there was no conceptual reason why they can't occur in any order.

docs/ changes best viewed with -w

* docs/schemas/domaincommon.rng (cputune): Add interleave.
* tests/qemuxml2argvdata/qemuxml2argv-cputune-iothreads.xml: Swap
up order, copying canonical form...
* tests/qemuxml2xmloutdata/qemuxml2xmlout-cputune-iothreads.xml:
...here.
* tests/qemuxml2xmltest.c (mymain): Mark the difference.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-09-15 18:59:40 -06:00
John Ferlan
938fb12fad domain_conf: Add iothreadpin to cputune
https://bugzilla.redhat.com/show_bug.cgi?id=1101574

Add an option 'iothreadpin' to the <cpuset> to allow for setting the
CPU affinity for each IOThread.

The iothreadspin will mimic the vcpupin with respect to being able to
assign each iothread to a specific CPU, although iothreads ids start
at 1 while vcpu ids start at 0. This matches the iothread naming scheme.
2014-09-15 13:19:01 -04:00
Erik Skultety
3aa0524104 network: check for invalid forward delay time
When spanning tree protocol is allowed in bridge settings, forward delay
value is set as well (default is 0 if omitted). Until now, there was no
check for delay value validity. Delay makes sense only as a positive
numerical value.

Note: However, even if you provide positive  numerical value, brctl
utility only uses values from range <2,30>, so the number provided can
be modified (kernel most likely) to fall within this range.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1125764
2014-09-15 17:44:37 +02:00
Michal Privoznik
742b08e30f qemu: Automatically create NVRAM store
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.

Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2014-09-10 09:38:07 +02:00
Michal Privoznik
68bf13dbef conf: Extend <loader/> and introduce <nvram/>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.

Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files

The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-10 09:38:07 +02:00
John Ferlan
e2523de554 domain_conf: Add support for iothreads in disk definition
Add a new disk "driver" attribute "iothread" to be parsed as the thread
number for the disk to use. In order to more easily facilitate the usage
and configuration of the iothread, a "zero" for the attribute indicates
iothreads are not supported for the device and a positive value indicates
the specific thread to try and use.
2014-08-28 16:27:54 -04:00
John Ferlan
ee3a9620da domain_conf: Introduce iothreads XML
Introduce XML to allowing adding iothreads to the domain. These can be
used by virtio-blk-pci devices in order to assign a specific thread to
handle the workload for the device.  The iothreads are the official
implementation of the virtio-blk Data Plane that's been in tech preview
for QEMU.
2014-08-28 16:27:53 -04:00
Alex Williamson
d071164272 Add new 'kvm' domain feature and ability to hide KVM signature
QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load.  Domain XML syntax is as follows:

<domain type='kvm>
  ...
  <features>
    ...
    <kvm>
      <hidden state='on'/>
    </kvm>
  </features>
  ...

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-08-26 10:41:24 +02:00
Martin Kletzander
43b8123d39 docs, conf: add support for bootmenu timeout
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-25 14:10:54 +02:00
Jianwei Hu
2a8fabba18 Maximum vlanid should be 4095 in interface.rng
The correct vlanid range is 0~4095.

After merging this patch, we can not validate a interface xml with vlanid >= 4096.
[root@localhost ~]# cat vlan.xml
<interface type='vlan' name='eno1.4096'>
   <start mode='onboot'/>
   <protocol family='ipv4'>
    <dhcp/>
   </protocol>
   <vlan tag='4096'>
     <interface name='eno1'/>
   </vlan>
</interface>
[root@localhost ~]# virt-xml-validate vlan.xml
vlan.xml:1: element interface: Relax-NG validity error : Invalid sequence in interleave
vlan.xml:6: element vlan: Relax-NG validity error : Element interface failed to validate content
vlan.xml:6: element vlan: Relax-NG validity error : Element vlan failed to validate attributes
vlan.xml fails to validate
[root@localhost ~]#

Here is a ip command help on this.
[root@localhost /]# ip link add link eno1 name eno1.90 type vlan help
Usage: ... vlan [ protocol VLANPROTO ] id VLANID                [ FLAG-LIST ]
                [ ingress-qos-map QOS-MAP ] [ egress-qos-map QOS-MAP ]

VLANPROTO: [ 802.1Q / 802.1ad ]
VLANID := 0-4095
FLAG-LIST := [ FLAG-LIST ] FLAG
FLAG := [ reorder_hdr { on | off } ] [ gvrp { on | off } ] [ mvrp { on | off } ]
        [ loose_binding { on | off } ]
QOS-MAP := [ QOS-MAP ] QOS-MAPPING
QOS-MAPPING := FROM:TO
2014-08-14 15:04:11 +02:00
Roman Bogorodskiy
0257d06ba4 storage: ZFS support
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.

Features supported:

 - pool-start, pool-stop
 - pool-info
 - vol-list
 - vol-create / vol-delete

Pool definition looks like that:

 <pool type='zfs'>
  <name>myzfspool</name>
  <source>
    <name>actualpoolname</name>
  </source>
 </pool>

The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.

User has to create a pool on his own, this driver doesn't
support pool creation currently.

A volume could be used with Qemu by adding an entry like this:

    <disk type='volume' device='disk'>
      <driver name='qemu' type='raw'/>
      <source pool='myzfspool' volume='vol5'/>
      <target dev='hdc' bus='ide'/>
    </disk>
2014-08-12 19:40:20 +04:00
Peter Krempa
e260a0e60a conf: Add USB sound card support and implement it for qemu 2014-08-08 14:34:20 +02:00
John Ferlan
54ac483e68 hostdev: Add iSCSI hostdev XML
Introduce a new structure to handle an iSCSI host device based on the
existing virDomainHostdevSubsysSCSI by adding a "protocol='iscsi'" to
the <source/> element. The existing scsi_host subsystem RNG was modified
to read an optional "protocol='adapter'", although it won't be written
out nor is it documented as an option (by choice).

The new hostdev structure mimics the existing <disk/> element for an
iSCSI device (network) device. New XML is:

  <hostdev mode='subsystem' type='scsi' managed='yes'>
    <source protocol='iscsi' name='iqn.1992-01.com.example'>
      <host name='example.org' port='3260'/>
      <auth username='myname'>
        <secret type='iscsi' usage='mycluster_myname'/>
      </auth>
    </source>
    <address type='drive' controller='0' bus='0' target='2' unit='5'/>
  </hostdev>

The controller element will mimic the existing scsi_host code insomuch
as when 'lsi' and 'virtio-scsi' are used.
2014-08-07 15:07:56 -04:00
Eric Blake
232a31bea3 blockcommit: track job type in xml
A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element.  This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>.  Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit).  It also prepares to update persistent XML
to match changes made to live XML when a copy completes.

* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-30 06:32:38 -06:00
Eric Blake
9a212d6708 blockcopy: add more XML for state tracking
Doing a blockcopy operation across a libvirtd restart is not very
robust at the moment.  In particular, we are clearing the <mirror>
element prior to telling qemu to finish the job.  Also, thanks to the
ability to request async completion, the user can easily regain
control prior to qemu actually finishing the effort, and they should
be able to poll the domain XML to see if the job is still going.

A future patch will fix things to actually wait until qemu is done
before modifying the XML to reflect the job completion.  But since
qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether
the job was cancelled (kept the original disk) or completed (pivoted
to the new disk), we have to track which of the two operations were
used to end the job.  Furthermore, we'd like to avoid attempts to
end a job where we are already waiting on an earlier request to qemu
to end the job.  Likewise, if we miss the qemu event (perhaps because
it arrived during a libvirtd restart), we still need enough state
recorded to be able to determine how to modify the domain XML once
we reconnect to qemu and manually learn whether the job still exists.

Although this patch doesn't actually fix the problem, it is a
preliminary step that makes it possible to track whether a job
has already begun steps towards completion.

* src/conf/domain_conf.h (virDomainDiskMirrorState): New enum.
(_virDomainDiskDef): Convert bool mirroring to new enum.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Handle new values.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust
client.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
* docs/schemas/domaincommon.rng (diskMirror): Expose new values.
* docs/formatdomain.html.in (elementsDisks): Document it.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-29 15:36:30 -06:00