By default, QEMU truncates serial file on open. Sometimes, it could be weird -
for example, when we are trying to investigate some event, which occured several
restarts ago. This patch adds an ability to preserve previous content.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
Add capabilities for virtio-keyboard, virtio-mouse
and virtio-tablet devices:
name "virtio-keyboard-device", bus virtio-bus
name "virtio-keyboard-pci", bus PCI
name "virtio-mouse-device", bus virtio-bus
name "virtio-mouse-pci", bus PCI
name "virtio-tablet-device", bus virtio-bus
name "virtio-tablet-pci", bus PCI
Map both -device and -pci versions of the device to one capability.
https://bugzilla.redhat.com/show_bug.cgi?id=1231114
Check if virtio-gpu provides virgl option, and add qemu command line
formatter.
It is enabled with the existing accel3d attribute:
<model type='virtio' heads='1'>
<acceleration accel3d='yes'/>
</model>
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu 2.5 provides virtio video device. It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.
Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Traditionally, we pass incoming migration URI on QEMU command line,
which has some drawbacks. Depending on the URI QEMU may initialize its
migration state immediately without giving us a chance to set any
additional migration parameters (this applies mainly for fd: URIs). For
some URIs the monitor may be completely blocked from the beginning until
migration is finished, which means we may be stuck in qmp_capabilities
command without being able to send any QMP commands.
QEMU solved this by introducing "defer" parameter for -incoming command
line option. This will tell QEMU to prepare for an incoming migration
while the actual incoming URI is sent using migrate-incoming QMP
command. Before calling this command we can normally talk to the
monitor and even set any migration parameters which will be honored by
the incoming migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The -sdl and -net ...name=XXX arguments were both introduced
in QEMU 0.10, so the QEMU driver can assume they are always
available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -vga argument was introduced, so the
QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0, the -drive cache option stopped using
the on/off value names, so the QEMU driver can assume
use of the new value names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we require QEMU 0.12.0, we can assume that QEMU supports
all of the fd, tcp, unix and exec migration protocols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have twice previously attempted to remove Xenner
support
commit de9be0ab4d
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Aug 22 17:29:01 2012 +0100
Remove xenner support
commit 92572c3d71
Author: Ján Tomko <jtomko@redhat.com>
Date: Wed Feb 18 16:33:50 2015 +0100
Remove code handling the QEMU_CAPS_DOMID capability
This change really does remove the last traces of it
in the capabilities handling code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.
Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.
Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The -no-reboot arg was added in QEMU 0.9.0, so the QEMU driver
can now assume it is always present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.11.0 the 'info chardev' monitor command can be
used to report on allocated chardev paths, so we can drop
support for parsing QEMU stderr to locate the PTY paths.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.0 the -vnc option accepts a ':' to separate port
from listen address, so the QEMU driver can assume that support
for listen addresses is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The kQEMU accelerator was deleted in QEMU 0.12, so we no
longer need to support it in the QEMU driver.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Check the QEMU version and refuse to work with QEMU versions
older than 0.12.0. This is approximately the vintage of QEMU
that is available in RHEL-6 era distros.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemu-kvm can be used to run ppc64 guests on ppc64le hosts and vice
versa, since the hardware is actually the same and the endianness
is chosen by the guest kernel.
Up until now, however, libvirt didn't allow the use of qemu-kvm
to run guests if their endianness didn't match the host's.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1267882
Unfortunately qemu currently doesn't offer introspection for machine types,
so we have to rely on version number, similar to QEMU_CAPS_MACHINE_USB_OPT.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
The main purpose of this patch is to introduce test mode to
virQEMUCapsCacheLookup(). This is done by adding a global variable, which
effectively overrides binary name. This variable is supposed to be set by
test suite.
The second addition is qemuTestCapsCacheInsert() function which allows the
test suite to actually populate the cache.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When looking for a QEMU binary suitable for running ppc64le guests
we have to take into account the fact that we use the QEMU target
as key for the hash, so direct comparison is not good enough.
Factor out the logic from virQEMUCapsFindBinaryForArch() to a new
virQEMUCapsFindTarget() function and use that both when looking
for QEMU binaries available on the system and when looking up
QEMU capabilities later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260753
The downstream ports of an x3130-upstream switch can each have one of
these plugged into them (and that is the only place they can be
connected). Each xio3130-downstream provides a single PCIe port that
can have PCI or PCIe devices hotplugged into it. Apparently an entire
set of x3130-upstream + several xio3130-downstreams can be hotplugged
as a unit, but it's not clear to me yet how that would be done, since
qemu only allows attaching a single device at a time.
This device will be used to implement the
"pcie-switch-downstream-port" model of pci controller.
This is the upstream part of a PCIe switch. It connects to a PCIe port
(but not PCI) on the upstream side, and can have up to 31
xio3130-downstream controllers (but no other types of devices)
connected to its downstream side.
This device will be used to implement the "pcie-switch-upstream-port"
model of pci controller.
This is a PCIE "root port". It connects only to a port of the
integrated pcie.0 bus of a Q35 machine (can't be hotplugged), and
provides a single PCIe port that can have PCI or PCIe devices
hotplugged into it.
This device will be used to implement the "pcie-root-port" model of
pci controller.
Here we assume that if qemu supports generic PCI host controller,
it is a part of virt machine and can be used for adding PCI devices.
In qemu this is actually a PCIe bus, so we also declare multibus
capability so that 0'th bus is specified to qemu correctly as 'pcie.0'
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This capability specifies that qemu can implement generic PCI host
controller. It is often used for virtual environments, including ARM.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
PowerPC pseries based VMs do not support a floppy disk controller.
This prohibits libvirt from adding floppy disk for a PowerPC pseries VM.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
This reverts commit 7b401c3bda.
Until libvirt is able to differentiate whether heads='1' is just a
leftover from previous libvirt or whether that's added by user on
purpose and also whether the domain was started with the support for
qxl's max_outputs, we cannot incorporate this patch into the tree
due to compatibility reasons.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Allows to specify maximum number of head to QXL driver.
Actually can be a compatiblity problem as heads in the XML configuration
was set by default to '1'.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_CPU_PATH which is a
derivative of SYSFS_SYSTEM_PATH
Use cpupath for nodeCapsInitNUMAFake and remove SYSFS_CPU_PATH
There's a small formatting problem in the function. One line is
not correctly indented. Fix this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This capability specifies that "virt" machine on ARM has PCI controller. Enabled when version is at least 2.3.0.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Some machine types are only reported as canonical names for other
machine types, which make it a bit harder to find what machine types are
supported by a specific QEMU binary. Ideally, one would just use
/capabilities/guest/arch[@name='...']/machine/text() XPath to get a list
of all supported machine types, but it doesn't work right now.
For example, we report
<machine canonical='pc-i440fx-2.3' maxCpus='255'>pc</machine>
in guest capabilities, but the corresponding
<machine maxCpus='255'>pc-i440fx-2.3</machine>
is missing.
This is a result of QMP probing. With "-machine ?" parsing QEMU sends
us two lines:
pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.3)
pc-i440fx-2.3 Standard PC (i440FX + PIIX, 1996) (default)
while query-machines QMP command reports both in the same entry:
{"name": "pc-i440fx-2.3", "is-default": true, "cpu-max": 255, "alias": "pc"}
Let's make sure we always report separate <machine/> for both the
canonical name and its alias and using the canonical name as the default
machine type (i.e., inserting it before its alias) in case is-default is
true.
https://bugzilla.redhat.com/show_bug.cgi?id=1229666
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
