Currently, -machine option is used only when dump-guest-core is set.
To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Allow migration over IPv6 by listening on [::] instead of 0.0.0.0
when QEMU supports it (QEMU_CAPS_IPV6_MIGRATION) and there is
at least one v6 address configured on the system.
Use virURIParse in qemuMigrationPrepareDirect to allow parsing
IPv6 addresses, which would cause an 'incorrect :port' error
message before.
Move setting of migrateFrom from qemuMigrationPrepare{Direct,Tunnel}
after domain XML parsing, since we need the QEMU binary path from it
to get its capabilities.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=846013
This reverts commit 5ac846e42e5b7e0475f6aa9cc1e0b0c8dac84d44.
After further discussions with Alon Levy, I learned the following:
The use of '-vga qxl' vs. '-device qxl-vga' is completely orthogonal
to whether ram_size can be exposed. Downstream distros are interested
in backporting support for multi-head qxl, but this can be done in
one of two ways:
1. Support one head per PCI device. If you do this, then it makes
sense to have full control over the PCI address of each device. For
full control, you need '-device qxl-vga' instead of '-vga qxl'.
2. Support multiple heads through a single PCI device. If you do
this, then you need to allocate more RAM to that PCI device (enough
ram to cover the multiple screens). Here, the device is hard-coded
to 0:0:2.0, both in qemu and libvirt code.
Apparently, backporting ram_size changes to allow multiple heads in
a single device is much easier than backporting multiple device
support. Furthermore, the presence or absence of qxl-vga.surfaces
is no different than the presence or absence of qxl-vga.ram_size;
both properties can be applied regardless of whether you have one
PCI device (-vga qxl) or multiple (-device qxl-vga), so this property
is NOT a good witness of whether '-device qxl-vga' support has been
backported.
Downstream RHEL will NOT be using this patch; and worse, leaving this
patch in risks doing the wrong thing if compiling upstream libvirt
on RHEL, so the best course of action is to revert it. That means
that libvirt will go back to only using '-device qxl-vga' for qemu
>= 1.2, but this is just fine because we know of no distros that plan
on backporting multiple PCI address support to any older version of
qemu. Meanwhile, downstream can still use ram_size to pack multiple
heads through a single PCI device.
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "dtb" option sets the filename for the device tree.
If without this option support, "-dtb file" will be converted into
<qemu:commandline> in domain XML file.
For example, '-dtb /media/ram/test.dtb' will be converted into
<qemu:commandline>
<qemu:arg value='-dtb'/>
<qemu:arg value='/media/ram/test.dtb'/>
</qemu:commandline>
This is not very friendly.
This patchset add special <dtb> tag like <kernel> and <initrd>
which is easier for user to write domain XML file.
<os>
<type arch='ppc' machine='ppce500v2'>hvm</type>
<kernel>/media/ram/uImage</kernel>
<initrd>/media/ram/ramdisk</initrd>
<dtb>/media/ram/test.dtb</dtb>
<cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline>
</os>
Signed-off-by: Eric Blake <eblake@redhat.com>
Newer versions of QEMU support virtio-scsi and virtio-rng devices
on the virtio-s390 and ccw buses. Adding capability detection,
address assignment and command line generation for that.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
QEMU_CAPS_VIRTIO_SCSI_PCI implies that virtio-scsi is only supported
for the PCI bus, which is not the case. Remove the _PCI suffix.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Multi-head QXL support is so useful that distros have started to
backport it to qemu earlier than 1.2. After discussion with
Alon Levy, we determined that the existence of the qxl-vga.surfaces
property is a reliable indicator of whether '-device qxl-vga' works,
or whether we have to stick to the older '-vga qxl'. I'm leaving
in the existing check for QEMU_CAPS_DEVICE_VIDEO_PRIMARY tied to
qemu 1.2 and newer (in case qemu is built without qxl support),
but for those distros that backport qxl, this additional capability
check will allow the correct command line for both RHEL 6.3 (which
lacks the feature) and RHEL 6.4 (where qemu still claims to be
version 0.12.2.x, but has backported multi-head qxl).
* src/qemu/qemu_capabilities.c (virQEMUCapsObjectPropsQxlVga): New
property test.
(virQEMUCapsExtractDeviceStr): Probe for backport of new
capability to qemu earlier than 1.2.
* tests/qemuhelpdata/qemu-kvm-1.2.0-device: Update test.
* tests/qemuhelpdata/qemu-1.2.0-device: Likewise.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device:
Likewise.
This commit adds the QEMU driver support for CCW addresses. The
current QEMU only allows virtio devices to be attached to the
CCW bus. We named the new capability indicating that support
QEMU_CAPS_VIRTIO_CCW accordingly.
The fact that CCW devices can only be assigned to domains with a
machine type of s390-ccw-virtio requires a few extra checks for
machine type in qemu_command.c on top of querying
QEMU_CAPS_VIRTIO_{CCW|S390}.
The majority of the new functions deals with CCW address generation
and management.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This patch adds a new capability bit QEMU_CAPS_OBJECT_RNG_EGD and code
to support the egd backend for the VirtIO RNG device.
The device is added by 3 qemu command line options:
-chardev socket,id=charrng0,host=1.2.3.4,port=1234 (communication
backend)
-object rng-egd,chardev=charrng0,id=rng0 (RNG protocol client)
-device virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x4 (the RNG device)
This patch implements support for the virtio-rng-pci device and the
rng-random backend in qemu.
Two capabilities bits are added to track support for those:
QEMU_CAPS_DEVICE_VIRTIO_RNG - for the device support and
QEMU_CAPS_OBJECT_RNG_RANDOM - for the backend support.
qemu is invoked with these additional parameters if the device is
enabled:
-object rng-random,id=rng0,filename=/test/phile (to add the backend)
-device virtio-rng-pci,rng=rng0,bus=pci.0,addr=0x4 (to add the device)
The conversion to qemuCaps dropped the ability with qemu{,-kvm} 1.2 and
newer to set the lost tick policy for the PIT. While the
-no-kvm-pit-reinjection option is depreacated, it is still supported at
least through 1.4, it is better to not lose the functionality.
Setting the uid/gid of the child process was the only thing done by
the hook function in this case, and that can now be done more simply
with virCommandSetUID/GID.
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add support for QEMU -add-fd command line parameter detection.
This intentionally rejects qemu 1.2, where 'add-fd' QMP did
not allow full control of set ids, and where there was no command
line counterpart, but accepts qemu 1.3.
Signed-off-by: Eric Blake <eblake@redhat.com>
A logic bug meant we reported KVM was possible for every
architecture, merely based on whether the query-kvm command
exists. We should instead have been doing it based on whether
the query-kvm command returns 'present: 1'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This previous commit
commit 1a50ba2cb07d8bb2aa724062889deb9efd7ad9e9
Author: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Date: Mon Nov 26 15:17:13 2012 +0100
qemu: Fix QMP Capabability Probing Failure
which attempted to make sure the QEMU process used for probing
ran as the right user id, caused serious performance regression
and unreliability in probing. The -daemonize switch in QEMU
guarantees that the monitor socket is present before the parent
process exits. This means libvirtd is guaranteed to be able to
connect immediately. By switching from -daemonize to the
virCommandDaemonize API libvirtd was no longer synchronized with
QEMU's startup process. The result was that the QEMU monitor
failed to open and went into its 200ms sleep loop. This happened
for all 25 binaries resulting in 5 seconds worth of sleeping
at libvirtd startup. In addition sometimes when libvirt connected,
QEMU would be partially initialized and crash causing total
failure to probe that binary.
This commit reverts the previous change, ensuring we do use the
-daemonize flag to QEMU. Startup delay is cut from 7 seconds
to 2 seconds on my machine, which is on a par with what it was
prior to the capabilities rewrite.
To deal with the fact that QEMU needs to be able to create the
pidfile, we switch pidfile location fron runDir to libDir, which
QEMU is guaranteed to be able to write to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In commit c4bbaaf8, caps->arch was checked uninitialized, rendering the
whole check useless.
This patch moves the conditional setting of QEMU_CAPS_NO_ACPI to
qemuCapsInitQMP, and removes the no longer needed exception for S390.
It also clears the flag for all non-x86 archs instead of just S390 in
qemuCapsInitHelp.
The virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently all classes must directly inherit from virObject.
This allows for arbitrarily deep hierarchy. There's not much
to this aside from chaining up the 'dispose' handlers from
each class & providing APIs to check types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is the QEMU backend code for the SCLP console support.
It includes SCLP capability detection, QEMU command line generation
and a test case.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Since we daemonized QEMU for capabilities probing there is a long
time if QEMU fails to launch. This is because we're not passing in
any virDomainObjPtr instance and thus the monitor code can not
check to see if the PID is still alive.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since 4c993d8a we failed to set this important capability, which
allows starting a domain with QXL video card. We set DEVICE_QXL
capability bit instead, which is not necessary wrong. Anyway, if
qemu supports the new '-device qxl' it supports older '-vga qxl'
as well. The latter is used for the primary (the first) qxl video
card, the former for other video cards.
Despite our great effort we still parsed qemu log output.
We wouldn't notice unless upcoming qemu 1.4 changed the
format of the logs slightly. Anyway, now we should gather
all interesting knobs like pty paths from monitor. Moreover,
since for historical reasons the first console can be just
an alias to the first serial port, we need to check this and
copy the pty path if that's the case to the first console.
Since we switched to QMP probing, the object types are spelled out
explicitly, i.e. virtio-net-pci. This has effectively disabled
the capability detection of s390 virtio devices. The trivial fix
is to add the s390 virtio types explicitly to qemuCapsObjectProps.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
ACPI is only supported on x86 platform, PPC can't support it.
So QEMU_CAPS_NO_ACPI shouldn't be set.
This patch is to remove QEMU_CAPS_NO_ACPI capability for
non-x86 platform.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Historically there was an inconsistency in handling of the
itanium arch. The xen driver & CPU model code treated it
as 'ia64' but the QEMU capabilities code used 'itanium'. On
the grounds that no one has ever seriously used itanium
with QEMU, while RHEL shipped itanium with Xen, we should
favour 'ia64' as the canonical format
Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
QEMU_CAPS_DEVICE_QXL -device qxl
QEMU_CAPS_DEVICE_VGA -device VGA
QEMU_CAPS_DEVICE_CIRRUS_VGA -device cirrus-vga
QEMU_CAPS_DEVICE_VMWARE_SVGA -device vmware-svga
QEMU_CAPS_DEVICE_VIDEO_PRIMARY /* safe to use -device XXX
for primary video device */
Fix a typo in qemuCapsObjectTypes, the string 'qxl' here
should be -device qxl rather than -vga [...|qxl|..]
Currently there is no way to detect it via QMP and requesting "-sandbox
off" works correctly even if it was compiled out, so this will work
unless someone both requests the sandbox in qemu.conf and builds QEMU
without the support for it.
Things are supposed to look like:
<machine canonical='pc-0.12'>pc</machine>
But are currently swapped. This can cause many VMs to revert to having
machine type='pc' which will affect save/restore across qemu upgrades.
Without this patch, attempts to create a disk snapshot when qemu
is too old results in a cryptic message:
virsh # snapshot-create 23 --disk-only
error: operation failed: Failed to take snapshot: unknown command: 'snapshot_blkdev'
Now it reports:
virsh # snapshot-create 23 --disk-only
error: unsupported configuration: live disk snapshot not supported with this QEMU binary
All versions of qemu that support live disk snapshot also support
QMP (basically upstream qemu 1.1 and later, and backports to RHEL 6.2).
* src/qemu/qemu_capabilities.h (QEMU_CAPS_DISK_SNAPSHOT): New
capability.
* src/qemu/qemu_capabilities.c (qemuCaps): Track it.
(qemuCapsProbeQMPCommands): Set it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive): Use
it.
* src/qemu/qemu_monitor.c (qemuMonitorDiskSnapshot): Simplify.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextDiskSnapshot):
Delete.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextDiskSnapshot):
Likewise.
The default machine type must be stored in the first element of
the caps->machineTypes array. This was done for help output
parsing but not for QMP probing.
Added a helper function qemuSetDefaultMachine to apply the same
fix up for both probing methods.
Further, it was necessary to set caps->nmachineTypes after QMP
probing.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
As of 1a50ba2cb07d8bb2aa724062889deb9efd7ad9e9 we fail to connect to the
monitor instead of getting an exit status != 0 from qemu itself. This
breaks capabilities probing for the non QMP case.
