Commit Graph

487 Commits

Author SHA1 Message Date
Michal Prívozník
ea7182c29f virsh: Increase device-detach intelligence
Up to now users have to give a full XML description on input when
device-detaching. If they omitted something it lead to unclear
error messages (like generated MAC wasn't found, etc.).
With this patch users can specify only those information which
specify one device sufficiently precise. Remaining information is
completed from domain.
2011-11-23 10:24:43 +01:00
Daniel P. Berrange
4789fb2e4e Add support for systemd init service
This patch adds support for a systemd init service for libvirtd
and libvirt-guests. The libvirtd.service is *not* written to use
socket activation, since we want libvirtd to start on boot so it
can do guest auto-start.

The libvirt-guests.service is pretty lame, just exec'ing the
original init script for now. Ideally we would factor out the
functionality, into some shared tool.

Instead of

  ./configure --with-init-script=redhat

You can now do

  ./configure --with-init-script=systemd

Or better still:

  ./configure --with-init-script=systemd+redhat

We can also now support install of the upstart init script

* configure.ac: Add systemd, and systemd+redhat options to
  --with-init-script option
* daemon/Makefile.am: Install systemd services
* daemon/libvirtd.sysconf: Add note about unused env variable
  with systemd
* daemon/libvirtd.service.in: libvirtd systemd service unit
* libvirt.spec.in: Add scripts to installing systemd services
  and migrating from legacy init scripts
* tools/Makefile.am: Install systemd services
* tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in
* tools/libvirt-guests.service.in: systemd service unit
2011-11-18 16:16:02 +00:00
Laine Stump
1ae8eed1b4 virsh: add iface-bridge and iface-unbridge commands
One of the top questions by libvirt users is how to create a host
bridge device so that guests can be directly on the physical
network. There are several example documents that explain how to do
this manually, but following them often results in confusion and
failure. virt-manager does a good job of creating a bridge based on an
existing network device, but not everyone wants to use virt-manager.

This patch adds a new command, iface-bridge that makes it just about
as simple as possible to create a new bridge device based on an
existing ethernet/vlan/bond device (including associating IP
configuration with the bridge rather than the now-attached device),
and start that new bridge up ready for action, eg:

    virsh iface-bridge eth0 br0

For symmetry's sake, it also adds a command to remove a device from a
bridge, restoring the IP config to the now-unattached device:

    virsh iface-unbridge br0

(I had a short debate about whether to do "iface-unbridge eth0"
instead, but that would involve searching through all bridge devices
for the one that contained eth0, which seems like a bit too much
trouble).

NOTE: These two commands require that the netcf library be available
on the host. Hopefully this will provide some extra incentive for
people using suse, debian, ubuntu, and other similar systems to polish
up (and push downstream) the ports to those distros recently pushed to
the upstream netcf repo by Dan Berrange. Anyone interested in helping
with that effort in any way should join the netcf-devel mailing list
(subscription info at
https://fedorahosted.org/mailman/listinfo/netcf-devel)

During creation of the bridge, it's possible to specify whether or not
the STP protocol should be started up on the bridge and, if so, how
many seconds the bridge should squelch traffic from newly added
devices while learning new topology (defaults are stp='on' and
delay='0', which seems to usually work best for bridges used in the
context of libvirt guests).

There is also an option to not immediately start the bridge (and a
similar option to not immediately start the un-attached device after
destroying the bridge. Default is to start the new device, because in
the case of iface-unbridge not starting is strongly discouraged as it
will leave the system with no network connectivity on that interface
(because it's necessary to destroy/undefine the bridge device before
the unattached device can be defined), and it seemed better to make
the option for iface-bridge behave consistently.

NOTE TO THOSE TRYING THESE COMMANDS FOR THE FIRST TIME: to guard
against any "unexpected" change to configuration, it is advisable to
issue an "virsh iface-begin" command before starting any interface
config changes, and "virsh iface-commit" only after you've verified
that everything is working as you expect. If something goes wrong,
you can always run "virsh iface-rollback" or reboot the system (which
should automatically do iface-rollback).

Aside from adding the code for these two functions, and the two
entries into the command table, the only other change to virsh.c was
to add the option name to vshCommandOptInterfaceBy(), because the
iface-unbridge command names its interface option as "bridge".

virsh.pod has also been updated with short descriptions of these two
new commands.
2011-11-16 15:56:45 -05:00
Daniel P. Berrange
d3406045fd Split src/util/network.{c,h} into 5 pieces
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines

 - src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
 - src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
 - src/util/virsocketaddr.c: virSocketAddr and APIs
 - src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
   for virNetDevBandwidth
 - src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
   for virNetDevVPortProfile

* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
  src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
  src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
  src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
  src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
  src/conf/domain_conf.h, src/conf/network_conf.c,
  src/conf/network_conf.h, src/conf/nwfilter_conf.h,
  src/esx/esx_util.h, src/network/bridge_driver.c,
  src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
  src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
  src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
  src/util/virnetdev.h, src/util/virnetdevtap.c,
  tools/virsh.c: Update include files
2011-11-15 10:27:54 +00:00
Daniel P. Berrange
0eee075dc7 Adjust naming of network device bandwidth management APIs
Rename virBandwidth to virNetDevBandwidth, and virRate to
virNetDevBandwidthRate.

* src/util/network.c, src/util/network.h: Rename bandwidth
  structs and APIs
* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/conf/network_conf.c, src/conf/network_conf.h,
  src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/qemu/qemu_command.c, src/util/macvtap.c,
  src/util/macvtap.h, tools/virsh.c: Update for API changes.
2011-11-09 17:10:28 +00:00
Xu He Jie
2d764cb472 virsh: Add VSH_OFLAG_EMPTY_OK for attach-disk command
As the description of removing CDROM media from
  http://wiki.libvirt.org/page/QEMUSwitchToLibvirt#eject_DEV

Add flag 'VSH_OFLAG_EMPTY_OK' to the option 'source' of attach-disk

Then avoid outputting <source> in the XML if 'source' was empty,
rather than trusting libvirt domain_conf.c to understand an empty
string.

Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-08 16:04:56 -07:00
Ryota Ozaki
6b5c9936ec virsh: Fix error message on vol-create-from failure
If vol-create-from is failed due to 'input volume not found',
virsh outputs like this:
  $ sudo virsh vol-create-from testpool test-vol.xml test.img
  error: failed to get vol 'test.img', specifying --pool might help
  error: Storage volume not found: no storage vol with matching path
However, '--pool' is incorrect because it is already specified as
second argument ('testpool' in this case). It should be "--inputpool".

The patch fixes this by using pooloptname, which will be "inputpool"
in this case and "pool" in other cases, as error message.
2011-10-27 21:28:22 -06:00
Ryota Ozaki
9981fc5828 virsh: Fix vol-info's 'Type' output
We have a new vol type "dir" in addition to "file" and "block", but
virsh doesn't know it. Fix it.

Additionally, the patch lets virsh output "unknown" if not matched
any of them.
2011-10-24 09:44:25 +08:00
Eric Blake
10d3272ec3 docs: document managed=yes of hostdev passthrough
Clarify some of the effects of managed passthrough <hostdev> devices;
with recent changes (commit d093547), a nodedev-reattach is only needed
to pair up to an explicit nodedev-dettach (but beware that older
virt-manager has a bug where it uses explicit nodedev-dettach under the
hood when using the gui to hotplug a hostdev device).

* docs/formatdomain.html.in: Mention reattach.
* tools/virsh.pod (nodedev): Mention managed mode.
2011-10-20 14:19:04 -06:00
Hu Tao
7b2723c5c1 support setting bandwidth from virsh attach-interface
Adds two options, inbound and outbound, to attach-interface to set
bandwidth when attaching interfaces
2011-10-20 10:31:50 +02:00
Guido Günther
07862822f3 Use virBufferEscapeShell in cmdEcho 2011-10-19 09:24:02 +02:00
Philipp Hahn
9f4b49cdfc Fix virt-sanlock-cleanup documentation
The referenced page does not exist, but locking.html has a section about
sanlock.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2011-10-17 10:57:36 -06:00
Michal Privoznik
4dadfe59d5 virDomainCoreDump: Introduce VIR_DUMP_RESET flag
This flag is intended to allow user to do so called system reset
after dump, instead of sending ACPI reboot event.
2011-10-13 09:32:27 +02:00
Eric Blake
8b6d1a2068 snapshot: add API for filtering by leaves
Counterpart to --roots.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_LIST_LEAVES):
New flag.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames): Document it.
* tools/virsh.c (cmdSnapshotList): Expose it.
* tools/virsh.pod (snapshot-list): Document --leaves.
2011-10-12 16:03:19 -06:00
Eric Blake
b77b203cac snapshot: virsh shorthand for operating on current snap
Rather than having to do:

$ virsh snapshot-revert dom $(virsh snapshot-current dom --name)

I thought it would be nice to do:

$ virsh snapshot-revert dom --current

I didn't add 'virsh snapshot-dumpxml --current' since we already have
'virsh snapshot-current' for the same task.  snapshot-list accepted
a name but did not require it, and that remains the case, with
--current serving in place of that name.  For all other commands,
name used to be required, and can now be replaced by --current;
I intentionally made it so that omitting both --current and a name
is an error (having the absence of a name imply --current seems
just a bit too magic, so --current must be explicit).  I also had
to keep snapshot-edit backwards-compatible, as the only command
that already had a --current argument alongside a name, which still
works to both edit a named snapshot and make it current.

* tools/virsh.c (vshLookupSnapshot): New helper function.
(cmdSnapshotEdit, cmdSnapshotList, cmdSnapshotParent)
(cmdSnapshotDelete, cmdDomainSnapshotRevert): Use it, adding an
option where needed.
* tools/virsh.pod (snapshot-delete, snapshot-edit)
(snapshot-list, snapshot-parent, snapshot-revert): Document
use of --current.
(snapshot-dumpxml): Mention alternative.
2011-10-11 16:38:48 -06:00
Eric Blake
c654ba8893 build: fix 'make distcheck'
I got these distcheck failures with sanlock enabled:

ERROR: files left in build directory after distclean:
./tools/virt-sanlock-cleanup
./src/locking/qemu-sanlock.conf

* src/Makefile.am (DISTCLEANFILES) [HAVE_SANLOCK]: Clean built
file.
* tools/Makefile.am (DISTCLEANFILES): Likewise.
2011-10-11 15:39:07 -06:00
Jiri Denemark
15d52307f9 build: Fix VPATH build with new probes 2011-10-11 21:41:51 +02:00
Eric Blake
521cc44700 snapshot: virsh fallback for snapshot-list --descendants --from
Given a list of snapshots and their parents, finding all descendants
requires a hairy traversal.  This code is O(n^3); it could maybe be
made to scale O(n^2) with the use of a hash table, but that costs more
memory.  Hopefully there aren't too many people with a hierarchy
so large as to approach REMOTE_DOMAIN_SNAPSHOT_LIST_NAMES_MAX (1024).

* tools/virsh.c (cmdSnapshotList): Add final fallback.
2011-10-10 17:24:47 -06:00
Eric Blake
16d7b3908e snapshot: virsh fallback for snapshot-list --from children
Iterating over one level of children requires parsing all snapshots
and their parents; a bit of code shuffling makes it pretty easy
to do this as well.

* tools/virsh.c (cmdSnapshotList): Add another fallback.
2011-10-10 17:22:07 -06:00
Eric Blake
510823018e snapshot: virsh fallback for snapshot-list --tree --from
Emulating --from requires grabbing the entire list of snapshots
and their parents, and recursively iterating over the list from
the point of interest - but we already do that for --tree.  This
turns on emulation for that situation.

* tools/virsh.c (__vshControl): Rename member.
(vshReconnect, cmdConnect, vshGetSnapshotParent): Update clients.
(cmdSnapshotList): Add fallback.
2011-10-10 17:19:11 -06:00
Eric Blake
fe383bb541 snapshot: virsh snapshot-list and children
Sometimes, we only care about one branch of the snapshot hierarchy.
Make it easier to list a single branch, by using the new APIs.

Technically, I could emulate these new virsh options on old servers
by doing a complete dump, then scraping xml to filter out just the
snapshots that I care about, but I didn't want to do that in this patch.

* tools/virsh.c (cmdSnapshotList): Add --from, --descendants.
* tools/virsh.pod (snapshot-list): Document them.
2011-10-10 17:11:05 -06:00
Eric Blake
bab4f31c78 snapshot: avoid accidental renames with snapshot-edit
I was a bit surprised that 'virsh snapshot-edit dom name' silently
allowed me to clone things, while still telling me the old name,
especially since other commands like 'virsh edit dom' reject rename
attempts (*).  This fixes things to be more explicit (**).

(*) Technically, 'virsh edit dom' relies on virDomainDefineXML
behavior, which rejects attempts to mix a new name with existing
uuid or new uuid with existing name, but you can create a new
domain by changing both uuid and name.  On the other hand, while
snapshot-edit --clone is a true clone, creating a new domain
would also have to decide whether to clone snapshot metadata,
managed save, and any other secondary data related to the domain.
Domain renames are not trivial either.

(**) Renaming or creating a clone is still a risky proposition -
for offline snapshots and system checkpoints, if the new name
does not match an actual name recorded in the qcow2 internal
snapshots, then you cannot revert to the new checkpoint.  But it
is assumed that anyone using the new virsh flags knows what they
are doing, and can deal with the fallout caused by a rename/clone;
that is, we can't completely prevent a user from shooting
themselves in the foot, so much as we are making the default
action less risky.

* tools/virsh.c (cmdSnapshotEdit): Add --rename, --clone.
* tools/virsh.pod (snapshot-edit): Document them.
2011-10-10 11:56:05 -06:00
Eric Blake
40baa1c899 snapshot: sort snapshot-list --tree
Otherwise, the results are not repeatable.

* tools/virsh.c (cmdSnapshotList): Print tree in predictable order.
2011-10-10 11:12:43 -06:00
tangchen
d5c4067d7b virsh: Update the help information for undefine command.
virsh undefine command can now undefine an active guest, but the help information is still the old.
This patch modifies it and make it coincident to the manpage of virsh.

Signed-off-by: tangchen <tangchen@cn.fujitsu.com>
2011-10-07 09:55:30 -06:00
Eric Blake
731f9a5e56 snapshot: let virsh edit disk snapshots
It was impossible for 'virsh snapshot-current dom name' to set name
as the current snapshot, if name is a disk-only snapshot.

Using strstr rather than full-blown xml parsing is safe, since the
xml is assumed to be well-formed coming from libvirtd rather than
arbitrary text coming from the user.

* tools/virsh.c (cmdSnapshotCurrent, cmdSnapshotEdit): Pass
disk_only flag when redefining a disk snapshot.
2011-10-07 08:29:50 -06:00
Eric Blake
203b361f09 snapshot: fix virsh error message typo
* tools/virsh.c (cmdSnapshotList): Spell exclusive correctly.
2011-10-07 07:53:27 -06:00
Eric Blake
3c797404a5 snapshot: add REVERT_FORCE to API
Although reverting to a snapshot is a form of data loss, this is
normally expected.  However, there are two cases where additional
surprises (failure to run the reverted state, or a break in
connectivity to the domain) can come into play.  Requiring extra
acknowledgment in these cases will make it less likely that
someone can get into an unrecoverable state due to a default revert.

Also create a new error code, so users can distinguish when forcing
would make a difference, rather than having to blindly request force.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_REVERT_FORCE):
New flag.
* src/libvirt.c (virDomainRevertToSnapshot): Document it.
* include/libvirt/virterror.h (VIR_ERR_SNAPSHOT_REVERT_RISKY): New
error value.
* src/util/virterror.c (virErrorMsg): Implement it.
* tools/virsh.c (cmdDomainSnapshotRevert): Add --force to virsh.
* tools/virsh.pod (snapshot-revert): Document it.
2011-10-05 11:33:36 -06:00
Eric Blake
64703c03fc snapshot: better virsh handling of missing current, parent
Previously, virsh 'snapshot-parent' and 'snapshot-current' were
completely silent in the case where the code conclusively proved
there was no parent or current snapshot, but differed in exit
status; this silence caused some confusion on whether the commands
worked.  Furthermore, commit d1be48f introduced a regression where
snapshot-parent would leak output about an unknown function, but
only on the first attempt, when talking to an older server that
lacks virDomainSnapshotGetParent.  This changes things to consistenly
report an error message and exit with status 1 when no snapshot
exists, and to avoid leaking unknown function warnings when using
fallbacks.

* tools/virsh.c (vshGetSnapshotParent): Alter signature, to
distinguish between real error and missing parent.  Don't pollute
last_error on success.
(cmdSnapshotParent): Adjust caller.  Always output message on
failure.
(cmdSnapshotList): Adjust caller.
(cmdSnapshotCurrent): Always output message on failure.
2011-10-04 14:36:24 -06:00
Marc-André Lureau
41bf4e721e virsh: do not unlink NULL file
error:could not take a screenshot of xp
==6216== Syscall param unlink(pathname) points to unaddressable byte(s)
==6216==    at 0x373A0D4937: unlink (syscall-template.S:82)
==6216==    by 0x40FD73: cmdScreenshot (virsh.c:3070)
==6216==    by 0x42BA0D: vshCommandRun (virsh.c:14920)
==6216==    by 0x42EC97: main (virsh.c:16379)
==6216==  Address 0x0 is not stack'd, malloc'd or (recently) free'd
==6216==
error:Requested operation is not valid: domain is not running
2011-09-30 19:22:06 -06:00
Xu He Jie
0ec9a8c2f2 virsh: Add 'reset' command for virsh
Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
2011-09-29 07:04:14 -06:00
Daniel Veillard
dd09da70f2 virsh: describe attach-interface parameter target
This patch is based on a improvement suggested by Kazuhiro Kikuchi
of Fujitsu, it gives a description of the target parameter for that
command

* tools/virsh.pod: add description for target parameter of
  attach-interface
2011-09-29 08:48:14 +08:00
Daniel Veillard
0c92e1428f virsh: update man page for cpu_shares parameter
The man page suggest that the cpu_shares parameter of schedinfo
allows values 0-262144, but the kernel remaps values 0 and 1 to
the minimum 2, just document that behaviour:

[root@test ~]# cat /cgroup/cpu/libvirt/qemu/cpu.shares
1024
[root@test ~]# echo 0 > /cgroup/cpu/libvirt/qemu/cpu.shares
[root@test ~]# cat /cgroup/cpu/libvirt/qemu/cpu.shares
2
[root@test ~]# echo 1 > /cgroup/cpu/libvirt/qemu/cpu.shares
[root@test ~]# cat /cgroup/cpu/libvirt/qemu/cpu.shares
2
[root@test ~]#

* tools/virsh.pod: update description of the cpu_shares parameter
  to indicate the values 0 and 1 are automatically changed by the
  kernel to minimal value 2
2011-09-29 08:48:03 +08:00
Eric Blake
1cf0e3db8b snapshot: add virsh snapshot-list --tree
Reuse the tree listing of nodedev-list, coupled with the new helper
function to efficiently grab snapshot parent names, to produce
tree output for a snapshot hierarchy.  For example:

$ virsh snapshot-list dom --tree
root1
 |
  +- sibling1
  +- sibling2
  |   |
  |   +- grandchild
  |
  +- sibling3

root2
 |
  +- child

* tools/virsh.c (cmdSnapshotList): Add --tree.
* tools/virsh.pod (snapshot-list): Document it.
2011-09-28 09:54:57 -06:00
Eric Blake
d1be48f976 snapshot: refactor virsh snapshot parent computation
Make parent computation reusable, using virDomainSnapshotGetParent
when possible.

* tools/virsh.c (vshGetSnapshotParent): New helper.
(cmdSnapshotParent): Use it.
2011-09-28 09:54:57 -06:00
Eric Blake
beeab55908 docs: document virsh nodedev-* commands
This section of the man page was completely missing; I stumbled on
it when I had no clue that I had to use nodedev-reattach after
I was done playing with <hostdev> device passthrough to one of my
guests.

* tools/virsh.pod (NODEDEV COMMANDS): New section.
(attach-device, detach-device): Add cross-references.
2011-09-28 09:17:02 -06:00
Peter Krempa
b0889eae6a virsh: Allow using complete <capabilities> elements with cpu-baseline
This patch cleans the cpu baseline function using new libvirt helper
functions and fixes XPath expression that selects <cpu> elements from
the source file, that can contain concatenated <capabilities> XMLs,
domain XMLs and bare <cpu> elements. The fixed XPath expression ensures
not to select NUMA <cpu id=... elements.

This patch also removes vshRealloc function, that remained unused after
cleaning up cpu-baseline.

https://bugzilla.redhat.com/show_bug.cgi?id=731645
2011-09-28 09:17:56 +02:00
Peter Krempa
882e768ef0 virsh: Allow using domain and capabilities XMLs with cpu-compare
This patch adds extraction of the <cpu> element from capabilities and
domain definition XML documents to improve user experience.

https://bugzilla.redhat.com/show_bug.cgi?id=731151
2011-09-28 09:12:09 +02:00
Eric Blake
63b2edc81c snapshot: fix man page typos
pod2man from perl-5.8.8 (RHEL 5) errors out on ill-formed POD:

*** ERROR: unterminated I<...> at line 1114 in file virsh.pod
*** ERROR: unterminated I<...> at line 1851 in file virsh.pod

Newer pod2man appears to be more tolerant (which is a shame,
because it meant that this error is harder to detect).

* tools/virsh.pod (undefine, snapshot-current): Add missing >.
2011-09-27 17:35:21 -06:00
Jiri Denemark
2c1a3dd878 virsh: Better document --copy-storage migrate options
Both --copy-storage-{all,inc} options require disk images to be present
on destination host.
2011-09-27 15:44:08 +02:00
Jiri Denemark
d82ce38415 virsh: Enhance documentation of commands starting jobs
Some virsh commands start a (long-running) job that can be monitored
using domjobinfo and aborted with domjobabort. Let's be explicit about
this in virsh man page.
2011-09-27 15:41:55 +02:00
Oskari Saarenmaa
f887334dcf Add unsafe cache mode support for disk driver
QEMU 0.13 introduced cache=unsafe for -drive, this patch exposes
it in the libvirt layer.

  * Introduced a new QEMU capability flag ($prefix_CACHE_UNSAFE),
    as even if $prefix_CACHE_V2 is set, we can't know if unsafe
    is supported.

  * Improved the reliability of qemu cache type detection.
2011-09-23 08:29:57 -06:00
Peter Krempa
c4111bd0d9 virsh: Improve virsh manual for virsh memtune command
Commit 0a22f54 added --min-guarantee option for the memtune command.
This option is supported only by the ESX hypervisor. This patch adds a
statement about this fact, to prevent user confusion.

This patch also adds explanation how to clear/set to unlimited the
memory tunables. (documments the -1 value).
2011-09-22 11:07:45 -06:00
Osier Yang
f858bcb2d6 virsh: Do not ignore the specified flags for cmdSaveImageDefine
Introduced by commit 42c52d53c, which added the support for new
flags, but forgot to update the API use to pass the flags.
2011-09-22 20:22:54 +08:00
Eric Blake
466f902446 virsh: fix regression in argv parsing
Prior to commit 85d2810, we had an issue where:

snapshot-create-as dom name --diskspec spec --diskspec spec

failed to parse the second spec, because the first spec had marked
that option as no longer requiring an argument.

In commit 85d2810, I fixed it by making argv options no longer mark
the option as seen.  But this in turn breaks mandatory argv options,
which now complain that the argv option is missing.

This patch reverts that part of 85d2810, and instead replaces it with
fixes to no longer clear opts_need_arg of an argv argument.

* tools/virsh.c (vshCmddefGetOption, vshCmddefGetData)
(vshCommandParse): Fix option parsing for required argv option.
(vshCmddefOptParse): Check that argv option is last.
* tests/virsh-optparse: Enhance test.
2011-09-22 13:28:18 +08:00
Osier Yang
2f0595244b virsh: More friendly err if no pool is specified for looking up a vol
There are 3 ways to lookup a volume, only virStorageVolLookupByName
needs pool object. So if no --pool is specified, it will tries to
get the volume via virStorageVolLookupByPath/virStorageVolLookupByKey.

But if all 3 ways fails, and no --pool is specified, a friendly
error might help the user get right way quickly.
2011-09-22 08:16:08 +08:00
Osier Yang
08c4de5984 virsh: Remove useless codes of cmdVolPath
Variable "name" is never used in the codes, it's useless.
2011-09-21 09:21:58 +08:00
Eric Blake
6d1c11e51c virsh: tweak previous domblkstat patch
Translators are likely to botch trailing spacing; by doing the
formatting outside of the translation, we can generally get
better alignment.  Also, for consistency, use 'bytes read' to
match 'bytes written'.

* tools/virsh.c (domblkstat_output): Drop trailing space. Tweak
rd_bytes output.
(cmdDomblkstat, DOMBLKSTAT_LEGACY_PRINT): Update formatting.
2011-09-19 17:54:05 -06:00
Peter Krempa
2ad83bf448 virsh: doc: Fix supported driver types for attach-disk command
Virsh man page lists driver types to be used with attach-device
command, but does not specify that those are usable only with the XEN
Hypervisor.

This patch adds statement, that those options specified are applicable
only on the Xen hypervisor and adds option usable with qemu emulator.

This patch also changes type of error returned by QEMU driver if the
user specifies incompatible driver type from VIR_ERR_INTERNAL_ERROR to
VIR_ERR_CONFIG_UNSUPPORTED.
2011-09-19 16:54:13 -06:00
Peter Krempa
619077b9eb virsh: Add more human-friendly output of domblkstat command
Users of virsh complain that output of the domblkstat command
is not intuitive enough. This patch adds explanation of fields
returned by this command to the help section for domblkstat and
the man page of virsh. Also a switch --human is added for
domblkstat that prints the fields with more descriptive
texts.

This patch also changes sequence of the output fields and their
names back to the order and spelling established by previous
versions of virsh to maintain compatibility with scripts.

Example of ordered and "translated" output:

PRE-patch:

virsh # domblkstat 1 vda
vda wr_bytes 5170176
vda wr_operations 511
vda rd_bytes 82815488
vda rd_operations 3726

POST-patch:

virsh # domblkstat 1 vda
vda rd_req 3726
vda rd_bytes 82815488
vda wr_req 478
vda wr_bytes 4965376

Example of human readable output:

virsh # domblkstat 1 vda --human
Device: vda
 number of read operations:      3726
 number of read bytes:           82815488
 number of write operations:     478
 number of bytes written:        4965376

https://bugzilla.redhat.com/show_bug.cgi?id=731656
2011-09-19 14:24:08 -06:00
Jiri Denemark
d2d6776342 qemu: Introduce shutdown reason for paused state
Qemu sends STOP event as part of the shutdown process. Detect such STOP
event and consider shutdown to be reason of emitting such event. That's
the best we can do until qemu provides us the reason directly in STOP
event. This allows us to report shutdown reason for paused state so that
apps can detect domains that failed to finish the shutdown process
(e.g., because qemu is buggy and doesn't exit on SIGTERM or it is
blocked in flushing disk buffers).
2011-09-16 17:25:55 +02:00