Commit Graph

1658 Commits

Author SHA1 Message Date
Peter Krempa
84f6960214 qemu: Check for presence of device and properities when getting CPUID
The QOM path in qemu that contains the CPUID registers of a running VM
may not be present (introduced in QEMU 1.5).

Since commit d94b781771 we have a regression with QEMU that don't
support reporting of the CPUID register state via the monitor as the
process startup code expects the path to exist.

This patch adds code that checks with the monitor if the requested path
already exists and uses it only in this case.
2013-11-12 19:36:06 +01:00
Peter Krempa
a6a6f84af9 qemu: Change return type of qemuMonitorGetGuestCPU()
To allow returning more granular errors, change the error type to an
integer.
2013-11-12 19:35:51 +01:00
Michal Privoznik
9fb3f9571d virSecurityLabelDefParseXML: Don't parse label on model='none'
https://bugzilla.redhat.com/show_bug.cgi?id=1027096

If there's the following snippet in the domain XML, the domain will be
lost upon the daemon restart (if the domain is started prior restart):

    <seclabel type='dynamic' relabel='yes'/>

The problem is, the 'label', 'imagelabel' and 'baselabel' are parsed
whenever the VIR_DOMAIN_XML_INACTIVE is *not* present or the label is
static. The latter is not our case, obviously. So, when libvirtd starts
up, it finds domain state xml and parse it. During parsing, many XML
flags are enabled but VIR_DOMAIN_XML_INACTIVE. Hence, our parser tries
to extract 'label', 'imagelabel' and 'baselabel' from the XML which
fails for model='none'. Err, this model - even though not specified in
XML - can be taken from qemu wide config file: /etc/libvirtd/qemu.conf.

However, in order to know we are dealing with model='none' the code in
question must be moved forward a bit. Then a new check must be
introduced. This is what the first two chunks are doing.

But this alone is not sufficient. The domain state XML won't contain the
model attribute without slight modification. The model should be
inserted into the XML even if equal to 'none' and the state XML is being
generated - what if the origin (the @security_driver variable in
qemu.conf) changes during libvirtd restarts?

At the end, a test to catch this scenario is introduced.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-11-11 16:01:25 +01:00
Peter Krempa
e0dc851164 qemu: Add support for paravirtual spinlocks in the guest
The linux kernel recently added support for paravirtual spinlock
handling to avoid performance regressions on overcomitted hosts. This
feature needs to be turned in the hypervisor so that the guest OS is
notified about the possible support.

This patch adds a new feature "paravirt-spinlock" to the XML and
supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in
qemu.

https://bugzilla.redhat.com/show_bug.cgi?id=1008989
2013-11-08 09:44:42 +01:00
Jiri Denemark
3afde0756f qemu: Add monitor APIs to fetch CPUID data from QEMU
The qemu monitor supports retrieval of actual CPUID bits presented to
the guest using QMP monitor. Add APIs to extract these information and
tests for them.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2013-11-08 09:44:36 +01:00
Ján Tomko
eab51940bd Allow root directory in filesystem source dir schema
Use absDirPath instead of absFilePath.

https://bugzilla.redhat.com/show_bug.cgi?id=1028107
2013-11-07 18:43:15 +01:00
Michal Privoznik
5ac7f07860 tests: Distribute virpcitestdata
Since 21685c955e we have tests/virpcitestdata dir containing the PCI
config files for some dummy PCI devices that are used int virpcitest.
However, the directory containing the config files is not distributed
making 'make rpm' fail.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-11-07 11:59:14 +01:00
Jiri Denemark
2cbc0164b0 tests: Fix virtpcitest in VPATH 2013-11-07 11:13:46 +01:00
Michal Privoznik
21685c955e virpcitest: Introduce testVirPCIDeviceReset
This addition, however, requires some refactoring to be done.  First of
all, to match the best practice we should detach the device prior
resetting it. That's why testVirPCIDeviceDetach is detaching all devices
within 0000:00:01.0 and 0000:00:03.0 range. Then, the brand new test
will reset the 0000:00:02.0 device, so the last testVirPCIDeviceReattach
can reattach all the devices back.

In order to perform a PCI device reset, the dummy config file is not
sufficient anymore and must be replaced with real PCI config (binary
mess). Such config files are to be stored under tests/virpcitestdata/
and ought to have '.config' suffix.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-11-06 09:34:17 +01:00
Michal Privoznik
361f2fa820 virpcitest: Fix variable arguments using in pci_driver_new
In the pci_driver_new function it is possible to set a list of
<vendor:device> IDs that the driver knows. These IDs are passed as
variable arguments and are processed  the usual way using va_start() and
va_arg(). However, after all arguments has been processed, we should
call va_end() what we aren't currently doing.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-11-05 17:00:13 +01:00
Ján Tomko
1569fa14d8 qemu: don't use deprecated -no-kvm-pit-reinjection
Since qemu-kvm 1.1 [1] (since 1.3. in upstream QEMU [2])
'-no-kvm-pit-reinjection' has been deprecated.
Use -global kvm-pit.lost_tick_policy=discard instead.

https://bugzilla.redhat.com/show_bug.cgi?id=978719

[1] http://git.kernel.org/cgit/virt/kvm/qemu-kvm.git/commit/?id=4e4fa39
[2] http://git.qemu.org/?p=qemu.git;a=commitdiff;h=c21fb4f
2013-11-05 16:04:06 +01:00
Michal Privoznik
47e86f9f7e virpcitest: Introduce check for unbinded devices
This just introduces the test for bug fixed in df4283a55b.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-11-04 17:30:46 +01:00
Michal Privoznik
05b28ca23d virpcitest: Introduce testVirPCIDeviceReattach
This test will reattach the PCI device detached in the previous test.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-11-04 17:28:51 +01:00
Michal Privoznik
25527ae25c virpcitest: Test virPCIDeviceDetach
This commit introduces yet another test under virpcitest:
virPCIDeviceDetach. However, in order to be able to do this, the
virpcimock needs to be extended to model the kernel behavior on PCI
device binding and unbinding (create 'driver' symlinks under the device
tree, check for device ID in driver's ID table, etc.)

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-11-04 17:28:48 +01:00
Michal Privoznik
d770618842 tests: Introduce virpcitest
Among with this test introduce virpcimock as we need to mock some
syscalls, e.g. redirect open() of a file under /sys/bus/pci to a
stub sysfs tree.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-11-04 14:56:56 +01:00
Eric Blake
fb8613525d maint: avoid further typedef accidents
To make it easier to forbid future attempts at a confusing typedef
name ending in Ptr that isn't actually a pointer, insist that we
follow our preferred style of 'typedef foo *fooPtr'.

* cfg.mk (sc_forbid_const_pointer_typedef): Enforce consistent
style, to prevent issue fixed in previous storage patch.
* src/conf/capabilities.h (virCapsPtr): Fix offender.
* src/security/security_stack.c (virSecurityStackItemPtr):
Likewise.
* tests/qemucapabilitiestest.c (testQemuDataPtr): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-30 17:02:12 -06:00
Giuseppe Scrivano
b51038a4cd capabilities: add baselabel per sec driver/virt type to secmodel
Expand the "secmodel" XML fragment of "host" with a sequence of
baselabel's which describe the default security context used by
libvirt with a specific security model and virtualization type:

<secmodel>
  <model>selinux</model>
  <doi>0</doi>
  <baselabel type='kvm'>system_u:system_r:svirt_t:s0</baselabel>
  <baselabel type='qemu'>system_u:system_r:svirt_tcg_t:s0</baselabel>
</secmodel>
<secmodel>
  <model>dac</model>
  <doi>0</doi>
  <baselabel type='kvm'>107:107</baselabel>
  <baselabel type='qemu'>107:107</baselabel>
</secmodel>

"baselabel" is driver-specific information, e.g. in the DAC security
model, it indicates USER_ID:GROUP_ID.

Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-29 07:06:04 -06:00
Eric Blake
2b172a8eff virsh: allow alias to expand to opt=value pair
We want to treat 'attach-disk --shareable' as an undocumented
alias for 'attach-disk --mode=shareable'.  By improving our
alias handling, we can allow all such --bool -> --opt=value
replacements, and guarantee up front that the alias is not
mixed with its replacement.

* tools/virsh.c (vshCmddefOptParse, vshCmddefGetOption): Add
support for expanding bool alias to --opt=value.
(opts_echo): Add another alias to test it.
* tests/virshtest.c (mymain): Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-24 11:17:41 +01:00
Michal Privoznik
32799f1a9d vircgroupmock: Mock access() to some more files
Currently, if access(path, mode) is invoked, we check if @path has this
special prefix SYSFS_PREFIX. If it does, we modify the path a bit and
call realaccess. If it doesn't we act just like a wrapper and call
realaccess directly. However, we are mocking fopen() as well. And as one
can clearly see there, fopen("/proc/cgroups") will succeed. Hence, we
have an error in our mocked access(): We need to check whether @path is
not equal to /proc/cgroups as it may not exists on real system we're
running however we definitely know how to fopen() it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-22 15:42:19 +01:00
Michal Privoznik
9eb68903f5 tests: Use lv_abs_top_builddir instead of bare abs_top_builddir
As stated in the comment above introduction of the lv_abs_top_builddir
variable, older automake doesn't provide abs_top_builddir variable.
Hence, we are creating our own one with lv_ prefix. However, when
exporting env variables to the tests, the variables are not evaluated
but only substituted. Hence:

  LIBVIRT_DRIVER_DIR="$(abs_top_builddir)/src/.libs"

is set to "/src/.libs" with old automake (even though we *think* we've
set the $abs_top_builddir variable just a few line above).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-22 15:42:15 +01:00
Daniel P. Berrange
9b0af09240 Remove (nearly) all use of getuid()/getgid()
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-21 14:03:52 +01:00
Daniel P. Berrange
9b8f307c6a Make virCommand env handling robust in setuid env
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering

  virCommandAddEnvPassAllowSUID
  virCommandAddEnvPassBlockSUID

And make virCommandAddEnvPassCommon use the appropriate
ones

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-21 14:03:52 +01:00
Daniel P. Berrange
291a6ef3e4 Add support for enabling SASL for SPICE guests
QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-17 16:02:43 +01:00
Eric Blake
caf516db51 storage: allow interleave in pool XML
The RNG grammar did not allow arbitrary interleaving, which makes
it harder than necessary to create a new pool from handwritten XML.

* docs/schemas/storagepool.rng: Allow interleaving.
* tests/storagepoolxml2xmlin/pool-sheepdog.xml: Test interleave.
* tests/storagepoolxml2xmlin/pool-iscsi-auth.xml: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-16 10:15:44 -06:00
Pranavkumar Sawargaonkar
9f53ffcb81 AArch64: Add qemu capabilities schemeta for test.
Add qemu AArch64 capabilities schemeta in caps-qemu-kvm.xml.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>

(crobinso: add aarch64 to schema arch list)
2013-10-15 17:02:17 -04:00
Pranavkumar Sawargaonkar
2f064f35d5 Implement minimal sysinfo for AArch64 platforms.
Implement the bare minimal sysinfo for AArch64 platforms by
reading the CPU models from /proc/cpuinfo.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
2013-10-15 16:59:43 -04:00
Daniel Hansel
6285c17f79 build: Add lxc testcase to dist list
Introduced by commit 3f029fb531 the RPM build
was broken due to a missing LXC textcase.

Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
2013-10-15 14:31:21 +02:00
Geoff Hickey
842f6fd338 esx: Fix floppy.fileName handling in the vmx file parser
The vmx file parsing code was reporting errors when parsing floppy.fileName
entries if the filename didn't end in .flp. There is no such restriction in
ESX; even using the GUI to configure floppy filenames you can specify any
arbitrary file with any extension.

Fix by changing the vmx parsing code so that it uses the floppy.fileType
value to determine whether floppy.fileName refers to a block device or a
regular file.

Also remove code that would have generated an error if no floppy.fileName
was specified. This is not an error either.

Updated the floppy tests in vmx2xmltest.c and xml2vmxtest.c.
2013-10-15 11:39:02 +01:00
Eric Blake
b8984770dc maint: avoid 'const fooPtr' in tests
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can).  But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).

Fix up offenders in the testsuite.

* tests/cputest.c (cpuTestCompareXML): Use intended type.
* tests/qemucapabilitiestest.c (testQemuCaps): Likewise.
* tests/qemumonitorjsontest.c: Drop const.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-14 14:34:37 -06:00
Eric Blake
b43efdaa13 maint: avoid 'const fooPtr' in hashes
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can).  But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).

Fix up virhash to provide a const-correct interface: all actions
that don't modify the table take a const table.  Note that in
one case (virHashSearch), we actually strip const away - we aren't
modifying the contents of the table, so much as associated data
for ensuring that the code uses the table correctly (if this were
C++, it would be a case for the 'mutable' keyword).

* src/util/virhash.h (virHashKeyComparator, virHashEqual): Use
intended type.
(virHashSize, virHashTableSize, virHashLookup, virHashSearch):
Make const-correct.
* src/util/virhash.c (virHashEqualData, virHashEqual)
(virHashLookup, virHashSize, virHashTableSize, virHashSearch)
(virHashComputeKey): Fix fallout.
* src/conf/nwfilter_params.c
(virNWFilterFormatParameterNameSorter): Likewise.
* src/nwfilter/nwfilter_ebiptables_driver.c
(ebiptablesFilterOrderSort): Likewise.
* tests/virhashtest.c (testHashGetItemsCompKey)
(testHashGetItemsCompValue): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-14 11:40:24 -06:00
Daniel P. Berrange
5787f0b95e Fix flaw in detecting log format
The log message regex has been

[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug|info|warning|error :

The precedence of '|' is high though, so this is equivalent to matching

   [0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}\.[0-9]{3}\+[0-9]{4}: [0-9]+: debug

Or

   info

Or

   warning

Or

   error :

Which is clearly not what it should have done. This caused the code to
skip over things which are not log messages. The solution is to simply
add brackets.

A test case is also added to validate correctness.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-14 10:31:01 +01:00
Michal Privoznik
1f9546e365 virsocket: Introduce virSocketAddrIsWildcard
This function takes exactly one argument: an address to check.
It returns true, if the address is an IPv4 or IPv6 address in numeric
format, false otherwise (e.g. for "examplehost").

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-11 11:05:06 +02:00
Michal Privoznik
c643b64e30 qemumonitorjsontest: Test qemuMonitorJSONSendKey
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-11 10:24:48 +02:00
Michal Privoznik
370a7a7959 qemumonitorjsontest: Test qemuMonitorJSONGetVirtType
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-11 10:22:11 +02:00
Michal Privoznik
ec7005d3c7 qemumonitorjsontest: Test qemuMonitorJSONGetCPUInfo
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-11 10:20:35 +02:00
Michal Privoznik
fbc3adc96d qemumonitorjsontest: Extend the test for yet another monitor commands
So far, we're unit testing some basic functions and some (so called)
simple functions (e.g. "qmp_capabilities", "system_powerdown"). However,
there are more functions which expect simple "{'return': {}}" reply, but
takes more args to construct the command (for instance "set_link"). This
patch aims on such functions.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-11 10:20:15 +02:00
Peter Krempa
f094aaac48 qemu: Prefer VFIO for PCI device passthrough
Prefer using VFIO (if available) to the legacy KVM device passthrough.

With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
2013-10-10 12:00:56 +02:00
Ján Tomko
3f029fb531 LXC: Fix handling of RAM filesystem size units
Since 76b644c when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>

This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.

The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.

This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.

Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.

Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
2013-10-09 17:44:45 +02:00
Cole Robinson
039eb5325e tests: Add qemu test for multiple timers
The following XML is the recommended default clock configuration for
qemu:

  <clock offset='utc'>
    <timer name='rtc' tickpolicy='catchup'/>
    <timer name='pit' tickpolicy='delay'/>
    <timer name='hpet' present='no'/>
  </clock>

However we weren't testing any of those timer elements.
2013-10-08 17:41:51 -04:00
Daniel P. Berrange
eee6eb666c Remove test case average timing
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-08 12:39:30 +01:00
Daniel P. Berrange
40911b66d4 Remove existing OOM test impl
The current OOM test impl is too inefficient to be used on the
large test suites. It loops running 'main' multiple times, once
for each alloc in the 'main' method. This has complexity
'n * (n + 1) / 2' in terms of total alloc count. It will be
replaced by a more efficient impl whicih runs individual test
cases instead. This will have same complexity but the values
of 'n' will be much smaller, so a net win.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-08 12:39:30 +01:00
Daniel P. Berrange
50ee3e0357 Don't clobber 'ret' variable in testCompareXMLToXMLHelper
The qemuxml2xmltest.c function testCompareXMLToXMLHelper would
clobber the 'ret' variable causing it to mis-diagnose OOM
errors.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-08 12:39:30 +01:00
Giuseppe Scrivano
ba1a91cd1f tests: avoid compile failure on linux kernels older than 2.6.19
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
2013-10-07 08:40:30 -06:00
Daniel P. Berrange
b77b16ce41 Remove virConnectPtr arg from virNWFilterDefParse*
None of the virNWFilterDefParse* methods require a virConnectPtr
arg, so just drop it

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-07 14:19:10 +01:00
Eric Blake
815e3098ef build: fix build on 32-bit platforms
qemumonitorjsontest.c: In function 'testQemuMonitorJSONqemuMonitorJSONGetBalloonInfo':
qemumonitorjsontest.c:1134: warning: integer constant is too large for 'long' type

* tests/qemumonitorjsontest.c
(testQemuMonitorJSONqemuMonitorJSONGetBalloonInfo)
(testQemuMonitorJSONqemuMonitorJSONGetBlockStatsInfo): Use correct
type.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-04 17:47:49 -06:00
Eric Blake
bdc55cc7d2 build: fix build --without-remote
I tried to test ./configure --without-lxc --without-remote.
First, the build failed with some odd errors, such as an
inability to build xen, or link failures for virNetTLSInit.
But when you think about it, once there is no remote code,
all of libvirtd is useless, any stateful driver that depends
on libvirtd is also not worth compiling, and any libraries
used only by RPC code are not needed.  So I patched
configure.ac to make for some saner defaults when an
explicit disable is attempted.  Similarly, since we have
migrated virnetdevbridge into generic code, the workaround
for Linux kernel stupidity must not depend on stateful
drivers being in use.

Then there's 'make check' that needs segregation.

Wow - quite a bit of cleanup to make --without-remote useful :)

* configure.ac: Let --without-remote toggle defaults on stateful
drivers and other libraries.  Pick up Linux kernel workarounds
even when qemu and lxc are not being compiled.
* tests/Makefile.am (test_programs): Factor out programs that
require remote.
* src/libvirt_private.syms (rpc/virnet*.h): Move...
* src/libvirt_remote.syms: ...into new file.
* src/Makefile.am (SYM_FILES): Ship new syms file.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-04 17:01:47 -06:00
Michal Privoznik
50c5818c0d qemucapabilitiesdata: Add qemu-1.6.50 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik
3e17d7956f qemucapabilitiesdata: Add qemu-1.6.0 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik
47674a2241 qemucapabilitiesdata: Add qemu-1.4.2 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00
Michal Privoznik
37819287f8 qemucapabilitiesdata: Add qemu-1.3.1 data
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 15:52:06 +02:00