Storage pools might want to specify format of the image when translating
the volume thus we can't add any default format when parsing the XML.
Add a explicit format when starting the VM and format is not present
neither by user specifying it nor by the storage pool translation
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Post parse callback adds the 'raw' type only for local files. Remote
files can also have backing store (even local) so we should do this also
for network backed storage.
Note that virStorageFileGetMetadata always considers files with no type
as raw so we will not accidentally traverse the backing chain and allow
unexpected files being labelled with svirt labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify some existing tests of network-based disks to omit the storage
format specification.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit f80eae8c2a I was too agresive in removing properties of
-drive for empty drives. It turns out that qemu actually persists the
state of 'readonly' and the throttling information even for the empty
drive.
Removing 'readonly' thus made qemu open any subsequent images added via
the 'change' command as RW which was forbidden by selinux thanks to the
restrictive sVirt label for readonly media.
Fix this by formating the property again and bump the tests and leave a
note detailing why the rest of the properties needs to be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This shows users can now use PCI for RISC-V guests, as long
as they opt into it by manually assigning addresses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the password stored in the secret driver under
the uuid specified by the vnc_tls_x509_secret_uuid
option in qemu.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=1602418
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If a -drive has no image, using image properties makes qemu whine that
they should not be used.
This patch stops formating cache/readonly/... for empty drives
for the pre-blockdev syntax. Unfortunately those parameters can't be
added later when inserting media, but on the other hand qemu will start
with an empty drive.
Since we already were able to start a VM with such config previously due
to qemu ignoring them I've opted just to skip formatting them.
Additionally with -blockdev support it will work as expected as the
image properties will be formatted when adding the image itself which is
not possible without it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1651457
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Upcomming change will influence CDROM with cache mode so add a test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
According to the result parsing from xml, add the unarmed property
into QEMU command line:
-device nvdimm,...[,unarmed=on]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to the result parsing from xml, add pmem property
into QEMU command line:
-object memory-backend-file,...[,pmem=on]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to the result parsing from xml, add align property
into QEMU command line:
-object memory-backend-file,...[,align=xxx]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Deprecate DO_TEST to do nvdimm qemuxml2argvdata tests, because
DO_TEST_CAPS_LATEST is a better choice. The DO_TEST needs
to specify all qemu capabilities and is not easy for scaling.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:
<devices>
...
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/dax0.0</path>
<alignsize unit='MiB'>2</alignsize>
</source>
<target>
<size unit='MiB'>4094</size>
<node>0</node>
<label>
<size unit='MiB'>2</size>
</label>
</target>
</memory>
...
</devices>
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1624223
There are two ways to request memory preallocation on cmd line:
-mem-prealloc and .prealloc attribute for a memory-backend-file.
However, as it turns out it's not safe to use both at the same
time. If -mem-prealloc is used then qemu will fully allocate the
memory (this is done by actually touching every page that has
been allocated). Then, if .prealloc=yes is specified,
mbind(flags = MPOL_MF_STRICT | MPOL_MF_MOVE) is called which:
a) has to (possibly) move the memory to a different NUMA node,
b) can have no effect when hugepages are in play (thus ignoring user
request to place memory on desired NUMA nodes).
Prefer -mem-prealloc as it is more backward compatible
compared to switching to "-numa node,memdev= + -object
memory-backend-file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Remove the disk from tests focusing on other aspects so that change to
-blockdev will touch less tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Depending on whether QEMU actually supports the option, we can put the
'rendernode' on the '-display egl-headless' cmdline.
https://bugzilla.redhat.com/show_bug.cgi?id=1628892
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Up until now, we formatted 'rendernode=' onto QEMU cmdline only if the
user specified it in the XML, otherwise we let QEMU do it for us. This
causes permission issues because by default the /dev/dri/renderDX
permissions are as follows:
crw-rw----. 1 root video
There's literally no reason why it shouldn't be libvirt picking the DRM
render node instead of QEMU, that way (and because we're using
namespaces by default), we can safely relabel the device within the
namespace.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new memoryBacking source type "memfd", supported by QEMU (when
the capability is available).
A memfd is a specialized anonymous memory kind. As such, an anonymous
source type could be automatically using a memfd. However, there are
some complications when migrating from different memory backends in
qemu (mainly due to the internal object naming at this point, but
there could be more). For now, it is simpler and safer to simply
introduce a new source type "memfd". Eventually, the "anonymous" type
could learn to use memfd transparently in a separate change.
The main benefits are that it doesn't need to create filesystem files,
and it also enforces sealing, providing a bit more safety.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add new functions to generate zPCI command string and append it to
QEMU command line. And the related tests are added.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We should ensure that QEMU supports zPCI when a zPCI address is defined
in XML and otherwise report an error. This patch introduces a generic
validation function qemuDomainDeviceDefValidateAddress() which calls
qemuDomainDeviceDefValidateZPCIAddress() if address type is PCI address.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
QEMU 3.1 supports Hyper-V-style PV IPIs making it cheaper for Windows
guests to send an IPI, especially when it targets many CPUs.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632833
When doing a SCSI passthrough we don't put format= onto the
command line. This causes qemu to probe the format automatically
which ends up in a warning in the domain log and possible qemu
disabling writes to the first block (according to the warning
message).
Based-on-work-of: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit ed5aa85f37
qemu: don't use chardev FD passing for vhostuser backend
altered the legacy DO_TEST macro.
Run the test against capabilities of QEMU 2.5.0 (which did not
support QEMU_CAPS_CHARDEV_FD_PASS) as well as the latest version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Test CCID smartcard passthrough from a unix listen socket.
Use the capabilities of QEMU 2.5.0 which did not support
chardev FD passing and the latest one, which (at the time
of this commit) it does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
-net name= will be deprecated in QEMU 3.1:
commit 101625a4d4ac7e96227a156bc5f6d21a9cc383cd
net: Deprecate the "name" parameter of -net
git describe: v3.0.0-791-g101625a4d4
Use the id option instead, supported since QEMU 1.2:
commit 6687b79d636cd60ed9adb1177d0d946b58fa7717
convert net_client_init() to OptsVisitor
git describe: v1.0-3564-g6687b79d63 contains: v1.2.0-rc0~142^2~8
Thankfully, libvirt only uses -net for non-PCI, non-virtio NICs
on ARM.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.
Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.
To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.
This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.
Resolves: https://bugzilla.redhat.com/1601318
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Attempting to use a chardev definition like
<serial type='unix'>
<target type='isa-serial'/>
</serial>
correctly results in an error being reported, since the source
path - a required piece of information - is missing; however,
the very similar
<serial type='unix'>
<target type='pci-serial'/>
</serial>
was happily accepted by libvirt, only to result in libvirtd
crashing as soon as the guest was started.
The issue was caused by checking the chardev's targetType
against whitelisted values from virDomainChrChannelTargetType
without first checking the chardev's deviceType to make sure
it is actually a channel, for which the check makes sense,
rather than a different type of chardev.
The only reason this wasn't spotted earlier is that the
whitelisted values just so happen to correspond to USB and
PCI serial devices and Xen and UML consoles respectively,
all of which are fairly uncommon.
https://bugzilla.redhat.com/show_bug.cgi?id=1609720
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1622455
If a domain is configured to use <source type='file'/> under
<memoryBacking/> we have to honour that setting and produce
-mem-path on the command line. We are not doing so if domain has
no guest NUMA nodes nor hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new tests use DO_TEST_CAPS_ARCH_LATEST() with an input
XML describing a very simple headless guest and cover most
architectures and machine types we care about.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-serial is an alias for virtio-serial-pci, which
should not have been used for a PCIe-less aarch64/virt
guest but it ended up being used anyway because the
virtio-mmio capability was missing and the algorithm
is buggy.
Fix the test case so that we can fix the algorithm next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 6534b3c4 tried to raise an error when there is no numa
nodes by setting access='shared' in the domain config, but added
a helper called from qemuDomainDeviceDefValidate instead of a
helper called from qemuDomainDefValidate for XML:
<memoryBacking>
<hugepages/>
<access mode='shared'/>
</memoryBacking>
Since there are no memory devices in the test XML, there would
be no validation failure, but the test added was still failing.
Investigating that it turns out that unnecessary XML elements
were causing the failure (no need for <video>, <graphics>,
<pm>, usb controller model "piix3-uhci", disk attribute for
"discard='unmap'", <serial>, <console>, <channel> and a
memballoon model). Removing all those before moving the method
caused the test to succeed.
So this patch moves the validation to the right place and
removes all the unnecessary XML pieces that were causing
a false validation failure.
https://bugzilla.redhat.com/show_bug.cgi?id=1448149#c14
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The architecture is new enough that we don't need to
concern ourselves with backwards compatibility in any
capacity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'metadata' and 'leases' are features internal to libvirt and thus don't
influence the generated QEMU command line. As they are not tested we
don't need the output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now we assume the flag always so there's no use for this test. Probably
a leftover from the cleanup of the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The test files were unused, but we don't have any other test for this
feature. Make use of the existing files by removing disks and using
DO_TEST_CAPS_LATEST to execute them. The legacy output files will be
dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
aarch64-acpi-nouefi and hostdev-scsi-boot are unused. Noticed when
checking whether '-nodefconfig' is still used by libvirt.
Unused since their introduction in commit deb38c4 and bab6ee6
respectively.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemus support FD passing so modify the tests to test the
proper code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Similarly to backing store indexes which will become stable eventually
we need also to be able to format and store in the status XML for later
use the index for the top level of the backing chain.
Add XML formatter, parser, schema and docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test data for nested backing chains with/without indexes (used in
status XMLs) which will excercise blockdev and the related work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The blockdev support will change existing approach to add disks to VMs
so all tests using the DO_TEST_CAPS_LATEST approach which have any disks
need to be forked so that the changes can be applied.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to test SEV we need real QEMU capabilities. Ideally, this would
be tested with -latest capabilities, however, our capabilities are
currently tied to Intel HW, even the 2.12.0 containing SEV were edited by
hand, so we can only use that one for now, as splitting the capabilities
according to the vendor is a refactor for another day. The need for real
capabilities comes from the extended SEV platform data (PDH, cbitpos,
etc.) we'll need to cache/parse.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If a domain has hugepages configured and we're currently building
memory-backend-file for a nvdimm device that domain has we will
put hugepages path onto the command line. It should have been
nvdimm path configured in the XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Previously we were ignoring "nodeset" attribute for hugepage pages
if there was no guest NUMA topology configured in the domain XML.
Commit <fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5> partially fixed
that issue but it introduced a somehow valid regression.
In case that there is no guest NUMA topology configured and the
"nodeset" attribute is set to "0" it was accepted and was working
properly even though it was not completely valid XML.
This patch introduces a workaround that it will ignore the nodeset="0"
only in case that there is no guest NUMA topology in order not to
hit the validation error.
After this commit the following XML configuration is valid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
</hugepages>
</memoryBacking>
but this configuration remains invalid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
<page size='1048576' unit='KiB'/>
</hugepages>
</memoryBacking>
The issue with the second configuration is that it was originally
working, however changing the order of the <page> elements resolved
into using different page size for the guest. The code is written
in a way that it expect only one page configured and always uses only
the first page in case that there is no guest NUMA topology configured.
See qemuBuildMemPathStr() function for details.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1591235
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We can safely validate the hugepage nodeset attribute at a define time.
This validation is not done for already existing domains when the daemon
is restarted.
All the changes to the tests are necessary because we move the error
from domain start into XML parse.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This use-case was broken by commit
<fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5>.
We allowed this configuration and it was working as expected therefore
we can consider it as regression. We should have never allowed such
configuration so now the best solution is in case of non-numa guest
silently ignore the 'nodeset' attribute if it's set to '0'.
That will be fixed by following patches.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This test case is currently working but it uncovers existing issue
in our code that the generated QEMU commandline uses the default 1G
hugepage instead of the 2M hugepage specified for exact node.
The issue in our code is that for non-numa guests we take into account
only the first hugepage. This will be fixed as invalid configuration
since it doesn't make any sense to set default and specific hugepage
for non-numa guest.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove unnecessary XML elements as well.
<numatune> for numa guest is tested by numatune-memnode test.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
From the args output you can see that the 'discard' feature is not
honored if you don't use hugepages, that is a bug, following patche
will fix it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Starting from pc-q35-2.4 the floppy controller is not enabled by
default. Fix the version check so that it does not match 2.11 as being
2.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix regression introduced in <42fd5a58adb>. With q35 machine type which
requires the explicitly specified FDC we'd format twoisa-fdc
controllers to the command line as the code was moved to a place where
it's called per-disk.
Move the call back after formatting all disks and reiterate the disks to
find the floppy controllers.
This also moves the '-global' directive which sets up the default
ISA-FDC to the end after all the disks but since we are modifying the
properties it is safe to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The floppy drive command line is different on the q35 machine. Make sure
to test that both drives are supported and also multiple machine
versions as we generate the commandline differently.
Note that both output files show wrong command line which will be fixed
subsequently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.
There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.
Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We should still make an effort to fill in data, just not raise
an error if say an ostype/virttype combo disappeared from caps.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have several cases when a VM has multiple disks in the test files so
having another one without any interesting configuration is not
necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the authentication and ipv6 cases into the main test file. To allow
removal of the separate testing of the secure credential passing via the
'secret' object in qemu, use the DO_TEST_CAPS_VER macro with version
2.5.0 when the secret object is not supported by qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The xml2argv variant was unused. The xml2xml variant is redundant in
other tests for RBD.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move various different iSCSI configuration into one test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'unsafe' cache test into 'disk-cache' and remove all the
individual cases for one cache mode each.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'll aggregate testing of all cache modes in this test later on.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify most of the tests into a common test named disk-cdrom-network by
adding multiple cdroms. The 'http' test is dropped since there can be
only 4 cdroms.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Few disk tests were testing support for pure -drive command line
generation for disks now that we assume it for all qemu versions the
cases are obsolete.
Replacements:
disk-readonly-no-device -> disk-readonly-disk
disk-floppy-tray-no-device -> disk-floppy-tray
disk-cdrom-tray-no-device -> disk-cdrom-tray
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We also have disk-copy_on_read.xml which also tests the command line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since QEMU 2.12, QEMU understands a new vfio-pci device option 'display'
which can be used to turn on display capabilities on vgpu-enabled
mediated devices, IOW emulated GPU devices like QXL will no longer be
needed with vgpu-enable mdevs.
QEMU defaults to 'auto' for the 'display' attribute, which is not
foolproof, so we need to play it safe here and default to display='off'
if this attribute wasn't provided in the XML explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU 2.12 introduced a new type of display for mediated devices using
vfio-pci backend which allows a mediated device to be used as a VGA
compatible device as an alternative to an emulated video device. QEMU
exposes this feature via a vfio device property 'display' with supported
values 'on/off/auto' (libvirt will default to 'off').
This patch adds the necessary bits to domain config handling in order to
expose this feature. Since there's no convenient way for libvirt to come
up with usable defaults for the display setting, simply because libvirt
is not able to figure out which of the display implementations - dma-buf
which requires OpenGL support vs vfio regions which doesn't need OpenGL
(works with OpenGL enabled too) - the underlying mdev uses.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The tls, x509 and x509verify options were deprecated in QEMU v2.5.0:
commit 3e305e4a4752f70c0b5c3cf5b43ec957881714f7
Author: Daniel P. Berrange <berrange@redhat.com>
ui: convert VNC server to use QCryptoTLSSession
Use the tls-creds-x509 object when available.
https://bugzilla.redhat.com/show_bug.cgi?id=1598167
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a test with QEMU 2.4.0 capabilites, as well as the latest caps.
The code paths for formatting TLS options will be altered and
2.4.0 is the newest version where QEMU_CAPS_OBJECT_TLS_CREDS_X509
is not supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use the new proper location for the read/write error policy selection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add output arguments generated with the latest qemu capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add multiple drives with the various configurations rather than having
multiple tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are testing character devices so the disk is not necessary. Minimize
the configuration. This will prevent changes when switching to blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU uses a shorthand '-sdl' which maps to '-display sdl'. However, if
there are any options to be passed to SDL, the full command version must
be used. Everything seemingly worked for us until commit 5038b30043
introduced OpenGL support for SDL and added ',gl=on/off' option which as
mentioned above could have never worked with the shorthand version of
the command. Indeed starting a domain with an SDL display and OpenGL
enabled, QEMU produces a rather cryptic error:
-sdl: Could not open 'gl=on': No such file or directory
This patch provides fixes to both the SDL cmdline generation and the
test suite.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When support was adding for passing a pre-opened listener socket to UNIX
chardevs, it accidentally passed the listener socket for client mode
chardevs too with predictable amounts of fail resulting. This affects
libvirt when using QEMU >= 2.12
Expand the unit test coverage to validate that we are only doing FD
passing when operating in server mode.
https://bugzilla.redhat.com/show_bug.cgi?id=1598440
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU chardevs have a bug which makes the vhostuser backend complain
about lack of support for FD passing when validating the chardev.
While this is ultimately QEMU's responsibility to fix, libvirt needs to
avoid tickling the bug.
Simply disabling chardev FD passing just for vhostuser's chardev is
the most prudent approach, avoiding need for a QEMU version number
check.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we format the serial, geometry and error policy on the -drive
backend argument.
QEMU added the ability to set serial and geometry on the frontend in
the 1.2 release deprecating use of -drive, with support being deleted
from -drive in 3.0.
We keep formatting error policy on -drive for now, because we don't
ahve support for that with -device for usb-storage just yet.
Note that some disk buses (sd) still don't support -device. Although
QEMU allowed these properties to be set on -drive for if=sd, they
have been ignored so we now report an error in this case.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add comma escaping for netsource. This is done here because
qemuBuildNetworkDriveStr has other external callers which
may not expect an escaped comma; however, this particular
command building path needs to perform the escaping for the
hostdev command line, so we do it now to ensure src->path
and src->host->name are covered.
Signed-off-by: Anya Harter <aharter@redhat.com>
This doesn't seem very useful at the moment, but it will make
sense once we introduce another HPT-related setting.
The output XML is decoupled from the input XML in preparation
of future changes as well; while doing so, we can shave a few
lines off the latter.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
VMs with hardcoded platform network devices are forced to use old
style '-net nic' command line config. Current we use qemu's vlan
option to hook this with the '-netdev' host side of things.
However since qemu 1.2 there is '-net nic,netdev=X' option for
explicitly referencing a netdev ID, which is more inline with
typical VM commandlines, so let's switch to that
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add comma escaping for cfg->spiceTLSx509certdir and
graphics->data.spice.rendernode.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for smartcard->data.cert.file[i] and
smartcard->data.cert.database.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for dev->data.file.path in cases
VIR_DOMAIN_CHR_TYPE_DEV and VIR_DOMAIN_CHR_TYPE_PIPE.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add test case explicitly defining a smartcard host certificates
database via the following xml:
<smartcard mode='host-certificates'>
<database>/tmp/foo</database>
</smartcard>
This case is not currently covered in the test suite.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Adjust the documentation, parser and tests to change:
launch-security -> launchSecurity
reduced-phys-bits -> reducedPhysBits
dh-cert -> dhCert
Also fix the headline in formatdomain.html to be more generic,
and some leftover closing elements in the documentation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU >= 2.12 provides 'sev-guest' object which is used to launch encrypted
VMs on AMD platform using SEV feature. The various inputs required to
launch SEV guest is provided through the <launch-security> tag. A typical
SEV guest launch command line looks like this:
-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 ...\
-machine memory-encryption=sev0 \
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The default is stable per machine type so there should be no need to keep that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1469338
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid problems with test cases specifying an alias machine type which
would change once capabilities for a newer version are added strip all
alias machine types for the DO_TEST_CAPS_LATEST based tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Format probing will be dropped so remove the tests which will become
obsolete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
The swtpm process now has --tpm2 as an additional parameter:
system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8 0.0 28364 3868 ? Rs 11:13 13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid
The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds extensions to existing test cases and specific test cases
for the tpm-emulator.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only define a TPM 1.2.
Extend the documentation.
Add a test case testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The default NBD TLS certificate path varies based on prefix given to
configure, causing tests to fail depending on build options.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a race condition when spawning QEMU where libvirt has spawned
QEMU but the monitor socket is not yet open. Libvirt has to repeatedly
try to connect() to QEMU's monitor until eventually it succeeds, or
times out. We use kill() to check if QEMU is still alive so we avoid
waiting a long time if QEMU exited, but having a timeout at all is still
unpleasant.
With QEMU 2.12 we can pass in a pre-opened FD for UNIX domain or TCP
sockets. If libvirt has called bind() and listen() on this FD, then we
have a guarantee that libvirt can immediately call connect() and
succeed without any race.
Although we only really care about this for the monitor socket and agent
socket, this patch does FD passing for all UNIX socket based character
devices since there appears to be no downside to it.
We don't do FD passing for TCP sockets, however, because it is only
possible to pass a single FD, while some hostnames may require listening
on multiple FDs to cover IPv4 and IPv6 concurrently.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add code that will handle the managed persistent reservations object
separately from the unmanaged one. There is only one managed object so
handling it with disks is awkward and does not scale well when backing
chains come into view.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The encryption was buggy and qemu actually dropped it upstream. Forbid
it for all versions since it would cause other problems too.
Problems with the old encryption include weak crypto, corruption of
images with blockjobs and a lot of usability problems.
This requires changing of the encryption type for the encrypted disk
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop the 'vxhs' suffix so other network protocols using TLS can be
put into the same test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the disk encryption type to qcow2+luks so that the appropriate
secret objects are generated. This tests that the proper alias is used
for the passphrase secret object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The disk encryption part is no way relevant to the rest of the test so
drop it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid the <source> vs. <target> confusion,
change <source auto='no' cid='3'/> to:
<cid auto='no' address='3'/>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Create a new vsock endpoint by opening /dev/vhost-vsock,
set the requested CID via ioctl (or assign a free one if auto='yes'),
pass the file descriptor to QEMU and build the command line.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a new 'vsock' element for the vsock device.
The 'model' attribute is optional.
A <source cid> subelement should be used to specify the guest cid,
or <source auto='yes'/> should be used.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1149445
If the domain requests usage of the genid functionality,
then add the QEMU '-device vmgenid' to the command line
providing either the supplied or generated GUID value.
Add tests for both a generated and supplied GUID value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The VM Generation ID is a mechanism to provide a unique 128-bit,
cryptographically random, and integer value identifier known as
the GUID (Globally Unique Identifier) to the guest OS. The value
is used to help notify the guest operating system when the virtual
machine is executed with a different configuration.
This patch adds support for a new "genid" XML element similar to
the "uuid" element. The "genid" element can have two forms "<genid/>"
or "<genid>$GUID</genid>". If the $GUID is not provided, libvirt
will generate one and save it in the XML.
Since adding support for a generated GUID (or UUID like) value to
be displayed modifying the xml2xml test to include virrandommock.so
is necessary since it will generate a "known" value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1534418
Just like ec982f6d92 denies hugepages for non-existent
guest NUMA nodes in case there are some nodes configured.
Unfortunately, when there are none, qemuBuildNumaArgStr() is not
called and thus we have to have check in qemuBuildMemPathStr()
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The JSON property generator should not escape commas as we do on the
command line. The JSON->commandline generator already does that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have to escape commas when formatting them on the command line. Add a
test case of a TLS path containing a comma.
Note that the output is wrong, this test case is to prove there's a bug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Everything can be disabled by not using the parent element. There's no
need to store this explicitly. Additionally it does not add any value
since any configuration is dropped if enabled='no' is configured.
Drop the attribute and adjust the code accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Support OpenGL when using SDL backend via -sdl,gl=on. Add associated
tests.
NB: Usage of DO_TEST_CAPS_LATEST in qemuxml2argv doesn't work in
this case because -sdl gl is not introspectable.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Support OpenGL accelerated rendering when using SDL graphics in the
domain config. Add associated test and documentation.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Generates the QEMU command line for the vfio-ccw device.
Adds various functionality testing for vfio-ccw in libvirt:
1. Generation of QEMU command line from domain xml file
2. Generation of dump xml from domain xml file
3. Checks duplicate/invalid addresses for vfio-ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.
Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1480668
QEMU has this new feature memory-backend-file.discard-data=yes
which is a nifty optimization. Basically, when qemu is quitting
or on memory hotplug it calls munmap() and close() on the file
that is backing the memory. However, this does not mean kernel
won't stop touching that part of memory. It still might. With
this feature enabled we tell kernel: "we don't need this memory
nor data stored in it". This makes kernel drop the memory
immediately without trying to sync memory with the mapped file.
Unfortunately, this cannot be turned on by default because we
can't be sure when users really don't care about what happens to
data after qemu dies. So it has to be opt-in. As usual, there are
three places where one can configure memory attributes. This
patch adds the feature to all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU has possibility to call madvise(.., MADV_REMOVE) in some
cases. Expose this feature to users by new element/attribute
discard.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For command line we need two things:
1) -object pr-manager-helper,id=$alias,path=$socketPath
2) -drive file.pr-manager=$alias
In -object pr-manager-helper we tell qemu which socket to connect
to, then in -drive file-pr-manager we just reference the object
the drive in question should use.
For managed PR helper the alias is always "pr-helper0" and socket
path "${vm->priv->libDir}/pr-helper0.sock".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:
<reservations enabled='yes' managed='no'>
<source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
</reservations>
If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:
https://www.redhat.com/archives/libvir-list/2017-November/msg01005.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The -no-kvm-pit-reinjection option has been deprecated since
its introduction in QEMU 1.3. See commit <1569fa1>.
Drop the capability since all the QEMUs we support allow tuning
the kvm-pit properties via -global.
Also add the QEMU_CAPS_KVM_PIT_TICK_POLICY to the clock-catchup
tests, since expecting it to succeed with QEMU that does not
have kvm-pit makes no sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Alter qemuBuildTPMDevStr to format the tpm-crb on the command line
and use the enum range checking for valid model.
Add a test case for the formation of the tpm-crb QEMU device
command line. The qemuxml2argvtest changes cannot use the newer
DO_TEST_CAPS_LATEST since building of the command line involves
calling qemuBuildTPMBackendStr which attempts to open the
path to the device (e.g. /dev/tmp0).
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Enable the TPM CRB to be specified in the domain XML. This
now allows to describe the TPM device like this:
<tpm model='tpm-crb'>
<backend type='passthrough'>
<device path='/dev/tpm0'/>
</backend>
</tpm>
Extend the XML schema to also allow tpm-crb.
Extend the documentation.
Add a test case for testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even though we just introduced the rom.enabled attribute to
properly cover the use case, there might be guests out there
that use the only previously available way of disabling PCI
ROM loading by not opting in to schema validation.
To make sure such guests will keep working going forward,
introduce a test case covering the legacy workaround.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The attribute can be used to disable ROM loading completely
for a device.
This might be needed because, even when the guest is configured
such that the PCI ROM will not be loaded in the PCI BAR, some
hypervisors (eg. QEMU) might still make it available to the
guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS)
will consume, thus not achieving the desired result.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1425058
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The disk cache mode translates to various frontend and backend
attributes for the qemu block layer. For the frontend device the
'writeback' parameter is used and provided as 'write-cache'. Implement
this so that we can later switch to using -blockdev where we will not
pass the cachemode directly any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Prepare the tests for adding the new parameter. The parameter was
introduced in qemu-2.7.0, so add a forked version of the test case to
see that it is formatted properly.
This test is also an example how the new testing macros should be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
If QEMU uses a seccomp blacklist (since 2.11), -sandbox on
no longer tries to whitelist all the calls, but uses sets
of blacklists:
default (always blacklisted with -sandbox on)
obsolete (defaults to deny)
elevateprivileges (setuid & co, default: allow)
spawn (fork & execve, default: allow)
resourcecontrol (setaffinity, setscheduler, default: allow)
If these are supported, default to sandbox with all four
categories blacklisted.
https://bugzilla.redhat.com/show_bug.cgi?id=1492597
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This functions contains logic that tries to use vhost for virtio
interfaces, even if <driver name='vhost'/> was not supplied.
In this case, a failure is non-fatal.
On my system, /dev/vhost-net was not accessible to the user running
'make check', but we should not depend on that.
Mock it to prevent accessing /dev/vhost-net and return some predictable
file descriptor numbers instead.
Introduced by commit c1f684e - deprecate QEMU_CAPS_VHOST_NET.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Jiří Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Implied by QEMU >= 1.2.0.
Also delete the now redundant disk-drive-copy-on-read test.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The (now assumed) QEMU_CAPS_CHARDEV_SPICEVMC is preferred.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Implied by QEMU >= 1.2.0.
Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used
when QEMU_CAPS_NO_USER_CONFIG is unsupported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This makes qemuDomainSupportsNetdev identical to
qemuDomainSupportsNicdev and leaves some code in
qemuDomainAttachNetDevice to be cleaned up later.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Up until now we have only formatted non-default GIC versions on
the command line, in order to maintain compatibility with older
QEMU versions that didn't implement the gic-version option to
begin with; however, doing so is entirely unnecessary for newer
QEMU versions, where the option is available. Moreover, having
the GIC version formatted on the command line at all times
ensures that QEMU changing its own defaults doesn't affect the
ABI of libvirt guests.
A few test cases are removed to avoid extra churn. It doesn't
matter for coverage, as those scenarios are already covered by
other parts of the test suite.
This patch is better viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use QEMU_CAPS_MACHINE_OPT and QEMU_CAPS_MACHINE_VMPORT_OPT
since it specifies <vmport state=off/>.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that support for the pcie-to-pci-bridge controller has
been implemented, adding the QEMU_CAPS_DEVICE_PCIE_PCI_BRIDGE
capability to the existing test is enough to cause the guest
to use pcie-to-pci-bridge instead of dmi-to-pci-bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This test shows what happens when you add a traditional PCI
device such as pci-serial to a pure PCIe machine type such
as aarch64/virt.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This format is used by the storage driver and other hypervisors but qemu
does not have notion of the 'iso' format and libvirt does not translate
it to anything useful, so it would not work anyways. Users should use
'raw' instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This is a storage driver type, which is not handled in qemu driver
properly. For accessing directories, disk type 'dir' is used instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU on S390 (since v2.11) can support virtio input ccw devices.
So build the qemu command line for ccw devices.
Also add test cases for virtio-{keyboard, mouse, tablet}-ccw.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
S390 guests can only support a virtio-gpu-ccw device as a video
device. So set default video model type to VIR_DOMAIN_VIDEO_TYPE_VIRTIO
for S390 guests.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support the virtio-gpu-ccw device,
which can be used as a video device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support virtio-gpu-ccw device.
Let's introduce a new qemu capability for the device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1558317
Similarly to b133fac356 we need to look up alias of CCID
controller when constructing smartcard command line instead of
relying on broken assumption it will always be 'ccid0'. After
user aliases it can be anything.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We're going to use the same test case to exercise all optional
pSeries features, so a more generic name is needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1552127
When building command line for USB controllers we have to do more
than just put controller's alias onto the command line. QEMU has
concept of these joined USB controllers. For instance ehci and
uhci controllers need to create the same USB bus. To achieve that
the slave controller needs to refer the master controller. This
worked until we've introduced user aliases because both master
and slave had the same alias. With user aliases slave can have
different alias than master. Therefore, when generating command
line for slave we need to look up the master's alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Nobody should use format detection due to security implications. The
result of the change is that 'raw' format will be printed unless
specified explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This change catches an invalid use of the option in our
test suite.
https://bugzilla.redhat.com/show_bug.cgi?id=1483816
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
This change catches an invalid use of the option in our
test suite.
https://bugzilla.redhat.com/show_bug.cgi?id=1483816
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
This wires up the previously added Chassis strings XML schema to be able to
generate comamnd line args for QEMU. This requires QEMU >= 2.1 release
containing this patch:
SMBIOS: Build aggregate smbios tables and entry point
https://git.qemu.org/?p=qemu.git;a=commit;h=c97294ec1b9e36887e119589d456557d72ab37b5
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This type of information defines attributes of a system
chassis, such as SMBIOS Chassis Asset Tag.
access inside VM (for example)
Linux: /sys/class/dmi/id/chassis_asset_tag.
Windows: (Get-WmiObject Win32_SystemEnclosure).SMBIOSAssetTag
wirhin Windows PowerShell.
As an example, add the following to the guest XML
<chassis>
<entry name='manufacturer'>Dell Inc.</entry>
<entry name='version'>2.12</entry>
<entry name='serial'>65X0XF2</entry>
<entry name='asset'>40000101</entry>
<entry name='sku'>Type3Sku1</entry>
</chassis>
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When no GIC version is specified, we currently default to GIC v2;
however, that's not a great default, since guests will fail to
start if the hardware only supports GIC v3.
Change the behavior so that a sensible default is chosen instead.
That basically means using the same algorithm whether the user
didn't explicitly enable the GIC feature or they explicitly
enabled it but didn't specify any GIC version.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Account for the fact that the default might change based on what
GIC versions are supported by QEMU. That's not the case at the
moment, but it will be soon.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
These test cases are supposed to verify GIC support works as
expected, and shouldn't concern themselves with other features;
we can trim them down significantly, and make them less likely
to need updating after unrelated changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashes or restarts, the QEMU process should be reconnected to
OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This wires up the previously added OEM strings XML schema to be able to
generate comamnd line args for QEMU. This requires QEMU >= 2.12 release
containing this patch:
commit 2d6dcbf93fb01b4a7f45a93d276d4d74b16392dd
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Sat Oct 28 21:51:36 2017 +0100
smbios: support setting OEM strings table
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 10c73bf1 fixed a bug that I had introduced back in commit
70249927 - if a vhost-scsi device had no manually assigned PCI
address, one wouldn't be assigned automatically. There was a slight
problem with the logic of the fix though - in the case of domains with
pcie-root (e.g. those with a q35 machinetype),
qemuDomainDeviceCalculatePCIConnectFlags() will attempt to determine
if the host-side PCI device is Express or legacy by examining sysfs
based on the host-side PCI address stored in
hostdev->source.subsys.u.pci.addr, but that part of the union is only
valid for PCI hostdevs, *not* for SCSI hostdevs. So we end up trying
to read sysfs for some probably-non-existent device, which fails, and
the function virPCIDeviceIsPCIExpress() returns failure (-1).
By coincidence, the return value is being examined as a boolean, and
since -1 is true, we still end up assigning the vhost-scsi device to
an Express slot, but that is just by chance (and could fail in the
case that the gibberish in the "hostside PCI address" was the address
of a real device that happened to be legacy PCI).
Since (according to Paolo Bonzini) vhost-scsi devices appear just like
virtio-scsi devices in the guest, they should follow the same rules as
virtio devices when deciding whether they should be placed in an
Express or a legacy slot. That's accomplished in this patch by
returning early with virtioFlags, rather than erroneously using
hostdev->source.subsys.u.pci.addr. It also adds a test case for PCIe
to assure it doesn't get broken in the future.
When the -machine pseries,max-cpu-compat=X is supported use
machine parameter instead of -cpu host,compat=X parameter as
that is deprecated now with qemu >= v2.10.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1519146
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1448149
If a domain has no numa nodes, that means we don't put any
memory-backend-file onto the qemu command line. That in turn
means we can't set access='shared'. Therefore, we should produce
an error instead of ignoring the setting silently.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 2.7 and newer don't allow guests to start unless the initial
vCPUs count is a multiple of the vCPU hotplug granularity, so
validate it and report an error if needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283700
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit id '70249927b' neglected to cover this case because the test
had taken the "shortcut" to already add the <address>; however, when
the PCI address assignment code was adjusted by commit id '70249927'
the vhost-scsi (VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST) wasn't
covered thus returning a 0 for pciFlags. So I altered the tests too
to make sure it doesn't happen again.
Previously the qemuxml2xmloutdata was a softlink to the source
qemuxml2argvdata, so I unlinked and recreated the output file to
force generation of the adddress. Without the test changes, an
address generation returns:
libvirt: Domain Config error : internal error: Cannot automatically
add a new PCI bus for a device with connect flags 00
if an address was supplied in the test, a restart of libvirtd or
edit of a guest would display the following opaque message:
warning : qemuDomainCollectPCIAddress:1237 :
qemuDomainDeviceCalculatePCIConnectFlags() thinks that the device
with PCI address 0000:00:09.0 should not have a PCI address
where the address is related to the guest PCI address provided.
Adding an IDE controller for a machinetype that has no built-in IDE
controller, libvirt will log an error. Currently the machinetype list
which returns by qemuDomainMachineHasBuiltinIDE only includes 440fx,
malta, sun4u and g3beige.
Remove the disk and the .args file since the expectation is the test
will fail in qemuxml2argvtest because floppy is not supported on pseries
and thus no disk is necessary and no .args file would be created to
compare against.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Similarly to the previous commit, rename .args files.
The files were renamed using the following commands. From
qemuxml2argvdata:
for i in qemuxml2argv-*.args; do mv $i ${i#qemuxml2argv-}; done
and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:
for i in $(find . -xtype l); do \
ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
done
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These XMLs live in a separate directory, there's no need for them
to have a special prefix in addition. It also doesn't play nicely
with ':e' completion in Vim, finding proper file based on
qemuxml2argvtest.c is also needlessly complicated.
The files were renamed using the following commands. From
qemuxml2argvdata:
for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done
and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:
for i in $(find . -xtype l); do \
ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
done
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that <serial> and <console> on s390/s390x behave a bit more like the
other architectures, remove this extra differentation, and use sclp
console by default for new guests. New virtio consoles can still be
added, and it is actually needed because of the limited number of
instances for sclp and sclplm.
This reverts commit b1c88c1476, whose
reasons are not totally clear.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The existing implementation set the address type for all serial
devices to spapr-vio, which made it impossible to use other devices
such as usb-serial and pci-serial; moreover, some decisions were
made based on the address type rather than the device type.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1512934
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This attribute was used to decide whether to format the type
attribute of the <target> element, but the logic didn't take into
account all possible cases and as such could lead to unexpected
results. Moreover, it's one more thing to keep track of, and can
easily fall out of sync with other attributes.
Now that we have VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE, we can
use that value to signal that no specific target type has been
configured for the serial device and as such the attribute should
not be formatted at all. All other values are now formatted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1425757
The blockdev-add code provides a mechanism to sanely provide user
and password-secret arguments for iscsi without placing them on the
command line to be viewable by a 'ps -ef' type command or needing
to create separate -iscsi devices for each disk/volume found.
So modify the iSCSI command line building to check for the presence
of the capability in order properly setup and use the domain master
secret object to encrypt the password in a secret object and alter
the parameters for the command line to utilize.
Modify the xml2argvtest to exhibit the syntax for both disk and
hostdev configurations.
Qemu has now an internal mechanism for locking images to fix specific
cases of disk corruption. This requires libvirt to mark the image as
shared so that qemu lifts certain restrictions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378242
Disk sharing between two VMs may corrupt the images if the format driver
does not support it. Check that the user declared use of a supported
storage format when they want to share the disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480
Some test cases have the backend tag inside wrong interfaces. The backend xml
tag does not support <interface type='user|direct|hostdev'>. So this commit
changes some network types inside the interfaces that have backend defined.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Since we already have such support for libxl all we need is qemu
driver adjustment. And a test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1434451
Just like in 9324f67a57 we need to put default sata alias
(which is hardcoded to "ide", obvious, right?) onto the command
line instead of the one provided by user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1434451
When testing user aliases it was discovered that for 440fx
machine type which has default IDE bus builtin, domain cannot
start if IDE controller has the user provided alias. This is
because for 440fx we don't put the IDE controller onto the
command line (since it is builtin) and therefore any device that
is plugged onto the bus must use the default alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In some cases management application needs to allocate memory for
qemu upfront and then just let qemu use that. Since we don't want
to expose path for memory-backend-file anywhere in the domain
XML, we can generate predictable paths. In this case:
$memoryBackingDir/libvirt/qemu/$shortName/$alias
where $shortName is result of virDomainDefGetShortName().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Libvirt historically stores storage source path including the volume as
one string in the XML, but that is not really flexible enough when
dealing with the fields in the code. Previously we'd store the slash
separating the two as part of the image name. This was fine for gluster
but it's not necessary and does not scale well when converting other
protocols.
Don't store the slash as part of the path. The resulting change from
absolute to relative path within the gluster driver should be okay,
as the root directory is the default when accessing gluster.
Original implementation used 'SocketAddress' equivalent from qemu for
the disk server field, while qemu documentation specifies
'InetSocketAddress'. The backing store parser uses the correct parsing
function but the formatter used the incorrect one (and also with the
legacy mode enabled which was wrong).
The qemuxml2argvtest expects the domain XMLs to be inactive ones.
Therefore we should pass inactive XMLs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
The default_tls_x509_verify (and related) parameters in qemu.conf
control whether the QEMU TLS servers request & verify certificates
from clients. This works as a simple access control system for
servers by requiring the CA to issue certs to permitted clients.
This use of client certificates is disabled by default, since it
requires extra work to issue client certificates.
Unfortunately the code was using this configuration parameter when
setting up both TLS clients and servers in QEMU. The result was that
TLS clients for character devices and disk devices had verification
turned off, meaning they would ignore errors while validating the
server certificate.
This allows for trivial MITM attacks between client and server,
as any certificate returned by the attacker will be accepted by
the client.
This is assigned CVE-2017-1000256 / LSN-2017-0002
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Somewhere around commit 9ff9d9f reserving entire PCI slots was
eliminated, as demonstrated by commit 6cc2014.
Reserve the functions required by the implicit devices:
00:01.0 ISA Bridge
00:01.1 IDE Controller
00:01.2 USB Controller (unless USB is disabled)
00:01.3 Bridge
https://bugzilla.redhat.com/show_bug.cgi?id=1460143
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The test suite has hardcoded /etc/pki/qemu as the cert dir, but this
only works if configure has --sysconfdir=/etc passed. We must set the
vxhs cert dir to a stable path in the test suite.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Alter qemu command line generation in order to possibly add TLS for
a suitably configured domain.
Sample TLS args generated by libvirt -
-object tls-creds-x509,id=objvirtio-disk0_tls0,dir=/etc/pki/qemu,\
endpoint=client,verify-peer=yes \
-drive file.driver=vxhs,file.tls-creds=objvirtio-disk0_tls0,\
file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,\
id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update the qemuxml2argvtest with a couple of examples. One for a
simple case and the other a bit more complex where multiple VxHS disks
are added where at least one uses a VxHS that doesn't require TLS
credentials and thus sets the domain disk source attribute "tls = 'no'".
Update the hotplug to be able to handle processing the tlsAlias whether
it's to add the TLS object when hotplugging a disk or to remove the TLS
object when hot unplugging a disk. The hot plug/unplug code is largely
generic, but the addition code does make the VXHS specific checks only
because it needs to grab the correct config directory and generate the
object as the command line would do.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.
Sample XML for a VxHS disk:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.
Update the qemuxml2xmltest in order to add a test to show the proper
parsing.
Also update the docs to describe the tls attribute.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit edaf4ebe95.
This uses "reconnect" as attribute for <source> element, but we already
have a <reconnect> element for <source> element for chardev devices.
Since this is the same feature for different device it should be
presented in XML the same way.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashed or restart, QEMU shoule be reconnect to OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The VxHS block device will only use the newer formatting options and
avoid the legacy URI syntax.
An excerpt for a sample QEMU command line is:
-drive file.driver=vxhs,file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update qemuxml2argvtest with a simple test.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Alter the schema to allow a VxHS block device. Sample XML is:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
<serial>eb90327c-8302-4725-9e1b-4e85ed4dc251</serial>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
Update the html docs to describe the capability for VxHS.
Alter the qemuxml2xmltest to validate the formatting.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Apart from generic checks, we need to constrain netmask/prefix
length a bit. Thing is, with current implementation QEMU needs to
be able to 'assign' some IP addresses to the virtual network. For
instance, the default gateway is at x.x.x.2, dns is at x.x.x.3,
the default DHCP range is x.x.x.15-x.x.x.30. Since we don't
expose these settings yet, it's safer to require shorter prefix
to have room for the defaults.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Currently, all that users can specify for an interface type of
'user' is the common attributes: PCI address, NIC model (and
that's basically it). However, some need to configure other
address range than the default one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
Add a couple of tests to "validate" checks in domain_conf that either
a missing secrettype (CONFIG_UNSUPPORTED) or an mismatched secrettype
of ceph for an iSCSI disk (INTERNAL_ERROR) will cause a parsing error.
Alter the example to remove the <auth> from:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:1' mode='host'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdb' bus='virtio'/>
</disk>
and
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:2' mode='direct'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdc' bus='virtio'/>
</disk>
The reality is, it's not even used. For a <source pool> the authdef
from the storage source pool will supercede whatever is in the <disk>
definition during virStorageTranslateDiskSourcePool processing. In fact,
if the pool doesn't have/need authentication, then the authdef would
be removed anyway as the storage pool would be handling things.
The "proof" for this is in the adjustment to the test to add an
<auth> for a disk. The resulting .args file won't add what normally
would be added "myname:encodedpassword@" prior to the hostname in
the IQN (e.g. iscsi://myname:encodedpassword@iscsi.example.org:3260/...
https://bugzilla.redhat.com/show_bug.cgi?id=1477880
If the "/#" is missing from the provided iSCSI path, then we need
to provide the default LUN of /0; otherwise, QEMU will fail to parse
the URL causing a failure to either create the guest or hotplug
attach the storage.
During post parse, for any iSCSI disk or hostdev, scan the source
path looking for the presence of '/', if found, then we can assume
the LUN is provided. If not found, alter the input XML to add the
"/0". This will cause the generated XML to have the generated
value when the domain config is saved after post parse.
arm/aarch64 -M virt on KVM doesn't and will never work with standard
VGA card emulation. The recommended method is to use type=virtio, so
let's make it the default for video devices without an explicit type
set by the user.
https://bugzilla.redhat.com/show_bug.cgi?id=1404112
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Currently while parsing domain XML we clear the UNIX path if it matches
one of the auto-generated paths by libvirt. After that when the guest
is started new path is generated but the mode is also changed to "bind".
In the real-world use-case the mode should not change, it only happens
if a user provides a mode='connect' and path that matches one of the
auto-generated path or not provides a path at all.
Before *reconnect* feature was introduced there was no issue, but with
the new feature we need to make sure that it's used only with "connect"
mode, therefore we need to move the mode change into parsing in order
to have a proper error reported by validation code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The test was introduced by 60135b22db.
The auto-generated path is removed by post-parse callback which
also changes the mode from "connect" to "bind" since the auto-generated
path makes sense only for "bind" mode.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
I mistakenly thought pSeries guests supported 32 PHBs,
but it turns out they only support 31. Validate the
target index accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1479647
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Split one of the existing tests to ensure both configuration
errors it contained cause a failure, and introduce a new
test case.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
There's some specific logic in qemuBuildCpuCommandLine to support
auto adding -cpu qemu 32 for arch=i686 with an x86_64 qemu binary.
Add a test case for it
https://bugzilla.redhat.com/show_bug.cgi?id=1458638
This code is so complicated because we allow enabling the same
bits at many places. Just like in this case: huge pages can be
enabled by global <hugepages/> element under <memoryBacking> or
on per <memory/> basis. To complicate things a bit more, users
are allowed to omit the page size which case the default page
size is used. And this is what is causing this bug. If no page
size is specified, @pagesize is keeping value of zero throughout
whole function. Therefore we need yet another boolean to hold
[use, don't use] information as we can't sue @pagesize for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Validate that we can pass QEMU command line options using a default
namespace, instead of a prefixed namespace
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Certain XML features that aren't in the <cpu> block map to -cpu
flags on the qemu cli. If one of these is specified but the user
didn't explicitly pass an XML <cpu> model, we need to format a
default model on the command line.
The current code handles this by sprinkling this default cpu handling
among all the different flag string formatting. Instead, switch it
to do this just once.
This alters some test output slightly: the previous code would
write the default -cpu in some cases when no flags were actually
added, so the output was redundant.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Disk serial schema has extra '.+' allowed characters in comparison
with check in code. Looks like there is no reason for that as qemu
allows any character AFAIK for serial. This discrepancy is originated
in commit id '85d15b51' where the ability to add serial was added.
Alter the disk-serial test to add a disk with all the possible
characters listed as the serial value.
While using "definitely-not-virtio" as a model name is very
cute, it will also cause the relevant test to fail once we
introduce stricter validation.
Use "e1000", which is definitely not virtio but also a valid
model name, instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
It's possible to have more than one unnamed virtio-serial unix channel.
We need to generate a unique name for each channel. Currently, we use
".../unknown.sock" for all of them. Better practice would be to specify
an explicit target path name; however, in the absence of that, we need
uniqueness in the names we generate internally.
Before the changes we'd get /var/lib/libvirt/qemu/channel/target/unknown.sock
for each instance of
<channel type='unix'>
<source mode='bind'/>
<target type='virtio'/>
</channel>
Now, we get vioser-00-00-01.sock, vioser-00-00-02.sock, etc.
Signed-off-by: Scott Garfinkle <seg@us.ibm.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All the pieces are now in place, so we can finally start
using isolation groups to achieve our initial goal, which is
separating hostdevs from emulated PCI devices while keeping
hostdevs that belong to the same host IOMMU group together.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1280542
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
When looking for slots suitable for a PCI device, libvirt
might need to add an extra PCI controller: for pSeries guests,
we want that extra controller to be a PHB (pci-root) rather
than a PCI bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
PCI bus has to be numbered sequentially, and no index can be
missing, so libvirt will fill in the blanks automatically for
the user.
Up until now, it has done so using either pci-bridge, for machine
types based on legacy PCI, or pcie-root-port, for machine types
based on PCI Express. Neither choice is good for pSeries guests,
where PHBs (pci-root) should be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
These tests demonstrate that, while it's now possible for the
user to create PHB explicitly and manually assign devices to
them, libvirt still defaults to extending the guest PCI
topology using PCI bridges and making suboptimal device
placement choices.
The next few commits will improve on these behaviors and the
tests outputs will automatically be updated to reflect this.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Some qemu arch/machine types have built in platform devices that
are always implicitly available. For platform serial devices, the
current code assumes that only old style -serial config can be
used for these devices.
Apparently though since -chardev was introduced, we can use -chardev
in these cases, like this:
-chardev pty,id=foo
-serial chardev:foo
Since -chardev enables all sorts of modern features, use this method
for platform devices.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Several tests are intending to test some serial/console related
bits but aren't setting QEMU_CAPS_CHARDEV. This will soon be enabled
unconditionally so let's add it ahead of time.
* q35-virt-manager-basic: Intended to test a virt-manager q35 config,
which will include a serial/console device
* console-compat*: console/serial XML compat handling
* bios: Needs a serial device for sgabios CLI
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
These tests are exercising old style -serial command lines. That
code will soon be removed, so drop these tests.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Several cases have incidental <serial> or <console> XML which aren't
the features being tested for. Upcoming changes will cause some
churn here, so instead drop these bits now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
AFAIK there aren't any cases where we will/should hit the old code
path for our supported qemu versions, so drop the old code.
Massive test suite churn follows
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
AFAIK there aren't any qemu arch/machine types with platform parallel
devices that would require old style -parallel config, so we shouldn't
ever need this nowadays.
Remove a now redundant test
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This demonstrates that the previous qemu caps changes will use
-chardev for pci-serial on aarch64 machvirt
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Check for the LOADPARM capabilility and potentially add a loadparm=x to
the "-machine" string for the QEMU command line.
Also add xml2argv test cases for loadparm.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Update the per device boot schema to add an optional loadparm parameter.
eg: <boot order='1' loadparm='2'/>
Extend the virDomainDeviceInfo to support loadparm option.
Modify the appropriate functions to parse loadparm from boot device xml.
Add the xml2xml test to validate the field.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
When added in multiple previous commits, it was used only with -device
qxl(-vga), but for some QEMUs (< 1.6) we need to add this
functionality when using -vga qxl as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283207
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
My fix 671d18594f was incomplete. If domain doesn't have
hugepages enabled, because of missing condition we would still be
putting hugepages path onto qemu cmd line. Clean up the
conditions so that it's more visible next time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
Consider the following XML:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='1'/>
</hugepages>
<source type='file'/>
<access mode='shared'/>
</memoryBacking>
<numa>
<cell id='0' cpus='0-3' memory='512000' unit='KiB'/>
<cell id='1' cpus='4-7' memory='512000' unit='KiB'/>
</numa>
The following cmd line is generated:
-object
memory-backend-file,id=ram-node0,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=0,cpus=0-3,memdev=ram-node0
-object
memory-backend-file,id=ram-node1,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=1,cpus=4-7,memdev=ram-node1
This is obviously wrong as for node 1 hugepages should have been
used. The hugepages configuration is more specific than <source
type='file'/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of hugepage enabled domains for qemuxml2argvtest.
Unfortunately, often when adding a test case there I forget to
add it to xml2xml test too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 824272cb28 attempted to fix escaping of characters in unix
socket path but it was wrong. We need to escape only ',', there is
no escape character for '='.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are currently some limitations in the emulated GICv3
that make it unsuitable as a default. Use GICv2 instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1450433
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Currently we consider all UNIX paths with specific prefix as generated
by libvirt, but that's a wrong assumption. Let's make the detection
better by actually checking whether the whole path matches one of the
paths that we generate or generated in the past.
The UNIX path isn't stored in config XML since libvirt-1.3.1.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446980
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add kernel_irqchip=split/on to the QEMU command line
and a capability that looks for it in query-command-line-options
output. For the 'split' option, use a version check
since it cannot be reasonably probed.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
Add a new <ioapic> element with a driver attribute.
Possible values are qemu and kvm. With 'qemu', the I/O
APIC can be put in the userspace even for KVM domains.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
This is a USB3 controller and it's a better choice than piix3-uhci.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Andrea Bolognani <abologna@redhat.com>
This patch maps /domain/cpu/cache element into -cpu parameters:
- <cache mode='passthrough'/> is translated to host-cache-info=on
- <cache level='3' mode='emulate'/> is transformed into l3-cache=on
- <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off
Any other <cache> element is forbidden.
The tricky part is detecting whether QEMU supports the CPU properties.
The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480,
earlier QEMU releases enabled host-cache-info by default and had no way
to disable it. If the property is present, it defaults to 'off' for any
QEMU until at least 2.9.0.
The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa.
Earlier versions worked as if l3-cache=off was passed. For any QEMU
until at least 2.9.0 l3-cache is 'off' by default.
QEMU 2.9.0 was the first release which supports probing both properties
by running device-list-properties with typename=host-x86_64-cpu. Older
QEMU releases did not support device-list-properties command for CPU
devices. Thus we can't really rely on probing them and we can just use
query-cpu-model-expansion QMP command as a witness.
Because the cache property probing is only reliable for QEMU >= 2.9.0
when both are already supported for quite a few releases, we let QEMU
report an error if a specific cache mode is explicitly requested. The
other mode (or both if a user requested CPU cache to be disabled) is
explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case
the QEMU defaults change. Any older QEMU already turns them off so not
doing so explicitly does not make any harm.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us. The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>. And in
those cases the guest can modify the settings itself.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.
Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The virt type for QEMU can be modified by -machine attribute "accel"
so there is no need to have different QEMU binary paths.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Like all devices, add the 'id' option for mdevs as well. Patch also
adjusts the test accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438431
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Depending on the architecture, requirements for ACPI and UEFI can
be different; more specifically, while on x86 UEFI requires ACPI,
on aarch64 it's the other way around.
Enforce these requirements when validating the domain, and make
the error message more accurate by mentioning that they're not
necessarily applicable to all architectures.
Several aarch64 test cases had to be tweaked because they would
have failed the validation step otherwise.
The capabilities used in test cases should match those used
during normal operation for the tests to make any sense.
This results in the generated command line for a few test
cases (most notably non-x86 test cases that were wrongly
assuming they could use -no-acpi) changing.
This reverts commit c2e60ad0e5.
Turns out this check is excessively strict: there are ways
other than <memtune><hard_limit> to raise the memory locking
limit for QEMU processes, one prominent example being
tweaking /etc/security/limits.conf.
Partially-resolves: https://bugzilla.redhat.com/1431793
QEMU allows for TSC frequency to be explicitly set to enable migration
with invtsc (migration fails if the destination QEMU cannot set the
exact same frequency used when starting the domain on the source host).
Libvirt already supports setting the TSC frequency in the XML using
<clock>
<timer name='tsc' frequency='1234567890'/>
</clock>
which will be transformed into
-cpu Model,tsc-frequency=1234567890
QEMU command line.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We want pcie-root-ports to be used when available in QEMU,
but at the same time we need to ensure that hosts running
older QEMU releases keep working and that the user can
override the default at any time.
Add a comment for the original pcie-root-port test cases
to make it clear how these new test cases are different.
For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.
Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, majority of the code is just ready as-is. Well, with one
slight change: differentiate between dimm and nvdimm in places
like device alias generation, generating the command line and so
on.
Speaking of the command line, we also need to append 'nvdimm=on'
to the '-machine' argument so that the nvdimm feature is
advertised in the ACPI tables properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.
At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:
<memory model='nvdimm'>
<source>
<path>/tmp/nvdimm</path>
</source>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
<address type='dimm' slot='0'/>
</memory>
So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.
For more info on NVDIMM visit the following web page:
http://pmem.io/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While reviewing a patch from Andrea that modified this test case, I
realized that although it was "properly failing" (it's a negative
test), that it was failing for the wrong reason (the MULTIFUNCTION cap
wasn't set in the test case, so it was saying that multifunction=on
wasn't supported by the QEMU binary; instead it should have been
complaining that it had run out of PCI slots of the appropriate type
and couldn't automatically add any more).
This improper failure had started when I added the patch to
automatically aggregate pcie-root-ports onto multiple functions of
each pcie-root slot, but I hadn't noticed it because the test still
failed.
This patch corrects the test case to 1) set the MULTIFUNCTION flag in
the caps, and 2) attempt to add 241 pcie-root-ports to a domain. Since
there are 30 slots available on a pcie-root (slot 0 is reserved, and
slot 31 is used by the integrated SATA controller), and a
pcie-root-port can only be placed on a function of a slot on
pcie-root, the maximum number of pcie-root-ports in any domain is 240.
virQEMUCapsHasPCIMultiBus() performs a version check on
the QEMU binary to figure out whether multiple buses are
supported, so to get the correct aliases assigned when
dealing with pSeries guests we need to spoof the version
accordingly in the test suite.
Up until a while ago, libvirt would automatically add a legacy
PCI controllers combo (dmi-to-pci-bridge + pci-bridge) to any
PCIe machine type (x86_64/q35 and aarch64/virt).
As a result, a number of input and output files in the test
suite ended up containing the legacy PCI controllers, even
though they are not needed or in any way relevant to the
feature being tested.
Get rid of most of the occurrences. Most of the time, this
just means removing the controllers from the input file and
regenerating the output files; in a few instances, some
minor tweaking is performed on the input file, most notably
removing the memory balloon: as memory balloon support was
not the scope of the test being changed, there is no loss
of test coverage from doing so.
Several occurrences of the legacy PCI controllers remain in
the test suite, both because removing their usage would have
required even more tweaking, and because we still want to
have coverage of this perfectly valid combination.
Add a new attribute 'rendernode' to <gl> spice element.
Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Due to a logic error, the autofilling of USB port when a bus is
specified:
<address type='usb' bus='0'/>
does not work for non-hub devices on domain startup.
Fix the logic in qemuDomainAssignUSBPortsIterator to also
assign ports for USB addresses that do not yet have one.
https://bugzilla.redhat.com/show_bug.cgi?id=1374128
This patch add support for file memory backing on numa topology.
The specified access mode in memoryBacking can be overriden
by specifying token memAccess in numa cell.
This part introduces new xml elements for file based
memorybacking support and their parsing.
(It allows vhost-user to be used without hugepages.)
New xml elements:
<memoryBacking>
<source type="file|anonymous"/>
<access mode="shared|private"/>
<allocation mode="immediate|ondemand"/>
</memoryBacking>
In order for memory locking to work, the hard limit on memory
locking (and usage) has to be set appropriately by the user.
The documentation mentions the requirement already: with this
patch, it's going to be enforced by runtime checks as well,
by forbidding a non-compliant guest from being defined as well
as edited and started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1316774
Commit 815d98a started auto-adding one hub if there are more USB devices
than available USB ports.
This was a strange choice, since there might be even more devices.
Before USB address allocation was implemented in libvirt, QEMU
automatically added a new USB hub if the old one was full.
Adjust the logic to try adding as many hubs as will be needed
to plug in all the specified devices.
https://bugzilla.redhat.com/show_bug.cgi?id=1410188
So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so
that they will be assigned to all the functions on a slot.
Some qemu test case outputs had to be adjusted due to the
pcie-root-ports now being put on multiple functions.
If there are multiple devices assigned to the different functions of a
single PCI slot, they will not work properly if the device at function
0 doesn't have its "multi" attribute turned on, so it makes sense for
libvirt to turn it on during PCI address assignment. Setting multi
then assures that the new setting is stored in the config (so it will
be used next time the domain is started), preventing any potential
problems in the case that a future change in the configuration
eliminates the devices on all non-0 functions (multi will still be set
for function 0 even though it is the only function in use on the slot,
which has no useful purpose, but also doesn't cause any problems).
(NB: If we were to instead just decide on the setting for
multifunction at runtime, a later removal of the non-0 functions of a
slot would result in a silent change in the guest ABI for the
remaining device on function 0 (although it may seem like an
inconsequential guest ABI change, it *is* a guest ABI change to turn
off the multi bit).)
virtio-pci is the way forward for aarch64 guests: it's faster
and less alien to people coming from other architectures.
Now that guest support is finally getting there (Fedora 24,
CentOS 7.3, Ubuntu 16.04 and Debian testing all support
virtio-pci out of the box), we'd like to start using it by
default instead of virtio-mmio.
Users and applications can already opt-in by explicitly using
<address type='pci'/>
inside the relevant elements, but that's kind of cumbersome and
requires all users and management applications to adapt, which
we'd really like to avoid.
What we can do instead is use virtio-mmio only if the guest
already has at least one virtio-mmio device, and use virtio-pci
in all other situations.
That means existing virtio-mmio guests will keep using the old
addressing scheme, and new guests will automatically be created
using virtio-pci instead. Users can still override the default
in either direction.
Existing tests such as aarch64-aavmf-virtio-mmio and
aarch64-virtio-pci-default already cover all possible
scenarios, so no additions to the test suites are necessary.
Add a test case for when the QEMU_CAPS_NO_KVM_PIT capability is set.
This capability is mutually exclusive to QEMU_CAPS_KVM_PIT_TICK_POLICY
and results in the same output regardless of whether "discard" or
"delay" was specified in the guest XML for 'tickpolicy'.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Separate out the "policy=discard" into it's own specific
qemu command line.
We'll rename "kvm-pit-device" test case to be "kvm-pit-discard"
since it has the syntax we'd be using.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
By a mistake, for the VIR_DOMAIN_TIMER_TICKPOLICY_DELAY qemu
command line creation, 'discard' was used instead of 'delay'
in commit id '1569fa14'.
Test "kvm-pit-delay" is fixed accordingly to show the correct
option being generated.
Remove the (now) redundant kvm-pit-device tests. As it turns
out there is no need to specify both QEMU_CAPS_NO_KVM_PIT and
QEMU_CAPS_KVM_PIT_TICK_POLICY since they are mutually exclusive
and "kvm-pit-device" becomes just the same as "kvm-pit-delay".
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Qemu has abandoned the +/-feature syntax in favor of key=value. Some
architectures (s390) do not support +/-feature. So we update libvirt to handle
both formats.
If we detect a sufficiently new Qemu (indicated by support for qmp
query-cpu-model-expansion) we use key=value else we fall back to +/-feature.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Add tests for controller based disks to check disk address compatibility
with disk bus types.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
If you've ever tried running a huge page backed guest under
different user than in qemu.conf, you probably failed. Problem is
even though we have corresponding APIs in the security drivers,
there's no implementation and thus we don't relabel the huge page
path. But even if we did, so far all of the domains share the
same path:
/hugepageMount/libvirt/qemu
Our only option there would be to set 0777 mode on the qemu dir
which is totally unsafe. Therefore, we can create dir on
per-domain basis, i.e.:
/hugepageMount/libvirt/qemu/domainName
and chown domainName dir to the user that domain is configured to
run under.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add in the block I/O throttling group parameter to the command line
if supported. If not supported, fail command creation.
Add the xml2argvtest for testing.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modify _virDomainBlockIoTuneInfo and rng schema to support the group_name
option for iotune throttling. Document the new value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add test cases for address conflicts between disks and hostdevs that are
using drive addresses.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Don't use duplicate disk addresses in test cases unless it's useful. At
least the test case will break once we have a check for uniqueness of
addresses at time of domain definition.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
With the QEMU components in place, provide the XML parsing to
invoke that code when given the following XML snippet:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn='naa.501234567890abcd'/>
</hostdev>
An optional address element can be specified within the hostdev
(pick CCW or PCI as necessary):
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0625'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
Add basic vhost-scsi tests which were cloned from hostdev-scsi-virtio-scsi
in both xml2argv and xml2xml. Added ones for both vhost-scsi-ccw and
vhost-scsi-pci since the syntaxes are slightly different between them.
Also adjusted the docs to describe the changes.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
For machinetypes with a pci-root bus (all legacy PCI), libvirt will
make a "fake" reservation for one extra slot prior to assigning
addresses to unaddressed PCI endpoint devices in the domain. This will
trigger auto-adding of a pci-bridge for the final device to be
assigned an address *if that device would have otherwise instead been
the last device on the last available pci-bridge*; thus it assures
that there will always be at least one slot left open in the domain's
bus topology for expansion (which is important both for hotplug (since
a new pci-bridge can't be added while the guest is running) as well as
for offline additions to the config (since adding a new device might
otherwise in some cases require re-addressing existing devices, which
we want to avoid)).
It's important to note that for the above case (legacy PCI), we must
check for the special case of all slots on all buses being occupied
*prior to assigning any addresses*, and avoid attempting to reserve
the extra address in that case, because there is no free address in
the existing topology, so no place to auto-add a pci-bridge for
expansion (i.e. it would always fail anyway). Since that condition can
only be reached by manual intervention, this is acceptable.
For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's
methodology for automatically expanding the bus topology is different
- pcie-root-ports are plugged into slots (soon to be functions) of
pcie-root as needed, and the new endpoint devices are assigned to the
single slot in each pcie-root-port. This is done so that the devices
are, by default, hotpluggable (the slots of pcie-root don't support
hotplug, but the single slot of the pcie-root-port does). Since
pcie-root-ports can only be plugged into pcie-root, and we don't
auto-assign endpoint devices to the pcie-root slots, this means
topology expansion doesn't compete with endpoint devices for slots, so
we don't need to worry about checking for all "useful" slots being
free *prior* to assigning addresses to new endpoint devices - as a
matter of fact, if we attempt to reserve the open slots before the
used slots, it can lead to errors.
Instead this patch just reserves one slot for a "future potential"
PCIe device after doing the assignment for actual devices, but only
if the only PCI controller defined prior to starting address
assignment was pcie-root, and only if we auto-added at least one PCI
controller during address assignment. This assures two things:
1) that reserving the open slots will only be done when the domain is
initially defined, never at any time after, and
2) that if the user understands enough about PCI controllers that they
are adding them manually, that we don't mess up their plan by
adding extras - if they know enough to add one pcie-root-port, or
to manually assign addresses such that no pcie-root-ports are
needed, they know enough to add extra pcie-root-ports if they want
them (this could be called the "libguestfs clause", since
libguestfs needs to be able to create domains with as few
devices/controllers as possible).
This is set to reserve a single free port for now, but could be
increased in the future if public sentiment goes in that direction
(it's easy to increase later, but essentially impossible to decrease)
Real Q35 hardware has an ICH9 chip that includes several integrated
devices at particular addresses (see the file docs/q35-chipset.cfg in
the qemu source). libvirt already attempts to put the first two sets
of ich9 USB2 controllers it finds at 00:1D.* and 00:1A.* to match the
real hardware. This patch does the same for the ich9 "HD audio"
device.
The main inspiration for this patch is that currently the *only*
device in a reasonable "workstation" type virtual machine config that
requires a legacy PCI slot is the audio device, Without this patch,
the standard Q35 machine created by virt-manager will have a
dmi-to-pci-bridge and a pci-bridge just for the sound device; with the
patch (and if you change the sound device model from the default
"ich6" to "ich9"), the machine definition constructed by virt-manager
has absolutely no legacy PCI controllers - any legacy PCI devices
(e.g. video and sound) are on pcie-root as integrated devices.
Previously we added a set of EHCI+UHCI controllers to Q35 machines to
mimic real hardware as closely as possible, but recent discussions
have pointed out that the nec-usb-xhci (USB3) controller is much more
virtualization-friendly (uses less CPU), so this patch switches the
default for Q35 machinetypes to add an XHCI instead (if it's
supported, which it of course *will* be).
Since none of the existing test cases left out USB controllers in the
input XML, a new Q35 test case was added which has *no* devices, so
ends up with only the defaults always put in by qemu, plus those added
by libvirt.
Now the a dmi-to-pci-bridge is automatically added just as it's needed
(when a pci-bridge is being added), we no longer have any need to
force-add one to every single Q35 domain.
A few of the qemu test cases assume that a dmi-to-pci-bridge will
always be added at index 1, and so they omit it from the input data
even though a pci-bridge is present at index 2, e.g.:
<controller type='pci' index='0' model='pcie-root'/>
<controller type='pci' index='2' model='pci-bridge'/>
Support for this odd practice was discussed on libvir-list and we
decided that the complex code required to make this continue was not
worth the headache of maintaining. So instead, this patch modifies the
test cases to manually add a dmi-to-pci-bridge at index 1 (since an
upcoming patch is going to eliminate the unconditional adding of
dmi-to-pci-bridge).
Because the auto-add was placing the dmi-to-pci-bridge later in the
list (even though it has a lower index) the test output is also
updated to take account for the new order (which puts the pci
controllers in index-order)
Previously libvirt would only add pci-bridge devices automatically
when an address was requested for a device that required a legacy PCI
slot and none was available. This patch expands that support to
dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a
machine with a pcie-root), and pcie-root-port (which is needed to add
a hotpluggable PCIe device). It does *not* automatically add
pcie-switch-upstream-ports or pcie-switch-downstream-ports (and
currently there are no plans for that).
Given the existing code to auto-add pci-bridge devices, automatically
adding pcie-root-ports is fairly straightforward. The
dmi-to-pci-bridge support is a bit tricky though, for a few reasons:
1) Although the only reason to add a dmi-to-pci-bridge is so that
there is a reasonable place to plug in a pci-bridge controller,
most of the time it's not the presence of a pci-bridge *in the
config* that triggers the requirement to add a dmi-to-pci-bridge.
Rather, it is the presence of a legacy-PCI device in the config,
which triggers auto-add of a pci-bridge, which triggers auto-add of
a dmi-to-pci-bridge (this is handled in
virDomainPCIAddressSetGrow() - if there's a request to add a
pci-bridge we'll check if there is a suitable bus to plug it into;
if not, we first add a dmi-to-pci-bridge).
2) Once there is already a single dmi-to-pci-bridge on the system,
there won't be a need for any more, even if it's full, as long as
there is a pci-bridge with an open slot - you can also plug
pci-bridges into existing pci-bridges. So we have to make sure we
don't add a dmi-to-pci-bridge unless there aren't any
dmi-to-pci-bridges *or* any pci-bridges.
3) Although it is strongly discouraged, it is legal for a pci-bridge
to be directly plugged into pcie-root, and we don't want to
auto-add a dmi-to-pci-bridge if there is already a pci-bridge
that's been forced directly into pcie-root.
Although libvirt will now automatically create a dmi-to-pci-bridge
when it's needed, the code still remains for now that forces a
dmi-to-pci-bridge on all domains with pcie-root (in
qemuDomainDefAddDefaultDevices()). That will be removed in a future
patch.
For now, the pcie-root-ports are added one to a slot, which is a bit
wasteful and means it will fail after 31 total PCIe devices (30 if
there are also some PCI devices), but helps keep the changeset down
for this patch. A future patch will have 8 pcie-root-ports sharing the
functions on a single slot.
The nec-usb-xhci device (which is a USB3 controller) has always
presented itself as a PCI device when plugged into a legacy PCI slot,
and a PCIe device when plugged into a PCIe slot, but libvirt has
always auto-assigned it to a legacy PCI slot.
This patch changes that behavior to auto-assign to a PCIe slot on
systems that have pcie-root (e.g. Q35 and aarch64/virt).
Since we don't yet auto-create pcie-*-port controllers on demand, this
means a config with an nec-xhci USB controller that has no PCI address
assigned will also need to have an otherwise-unused pcie-*-port
controller specified:
<controller type='pci' model='pcie-root-port'/>
<controller type='usb' model='nec-xhci'/>
(this assumes there is an otherwise-unused slot on pcie-root to accept
the pcie-root-port)
The e1000e is an emulated network device based on the Intel 82574,
present in qemu 2.7.0 and later. Among other differences from the
e1000, it presents itself as a PCIe device rather than legacy PCI. In
order to get it assigned to a PCIe controller, this patch updates the
flags setting for network devices when the model name is "e1000e".
(Note that for some reason libvirt has never validated the network
device model names other than to check that there are no dangerous
characters in them. That should probably change, but is the subject of
another patch.)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1343094
libvirt previously assigned nearly all devices to a "hotpluggable"
legacy PCI slot even on machines with a PCIe root bus (and even though
most such machines don't even support hotplug on legacy PCI slots!)
Forcing all devices onto legacy PCI slots means that the domain will
need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a
pci-bridge (to provide hotpluggable legacy PCI slots which, again,
usually aren't hotpluggable anyway).
To help reduce the need for these legacy controllers, this patch tries
to assign virtio-1.0-capable devices to PCIe slots whenever possible,
by setting appropriate connectFlags in
virDomainCalculateDevicePCIConnectFlags(). Happily, when that function
was written (just a few commits ago) it was created with a
"virtioFlags" argument, set by both of its callers, which is the
proper connectFlags to set for any virtio-*-pci device - depending on
the arch/machinetype of the domain, and whether or not the qemu binary
supports virtio-1.0, that flag will have either been set to PCI or
PCIe. This patch merely enables the functionality by setting the flags
for the device to whatever is in virtioFlags if the device is a
virtio-*-pci device.
NB: the first virtio video device will be placed directly on bus 0
slot 1 rather than on a pcie-root-port due to the override for primary
video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not
to change that is a topic of discussion, but this patch doesn't change
that particular behavior.
NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root
complex) does *not* support hotplug, this means that suitable
controllers must also be in the config (i.e. either pcie-root-port, or
pcie-downstream-port). For now, libvirt doesn't add those
automatically, so if you put virtio devices in a config for a qemu
that has PCIe-capable virtio devices, you'll need to add extra
pcie-root-ports yourself. That requirement will be eliminated in a
future patch, but for now, it's simple to do this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
...
Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
The memory device alias needs to be treated as machine ABI as qemu is
using it in the migration stream for section labels. To simplify this
generate the alias from the slot number unless an existing broken
configuration is detected.
With this patch the aliases are predictable and even certain
configurations which would not be migratable previously are fixed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1359135
As with other devices assign the slot number right away when adding the
device. This will make the slot numbers static as we do with other
addressing elements and it will ultimately simplify allocation of the
alias in a static way which does not break with qemu.
Simplify handling of the 'dimm' address element by allowing to specify
the slot number only. This will allow libvirt to allocate slot numbers
before starting qemu.
Even though using /dev/shm/asdf as the backend, we still need to make
the mapping shared. The original patch forgot to add that parameter.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1392031
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Propagate the selected or default level to qemu if it's supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU added support for ivshmem-plain and ivshmem-doorbell. Those are
reworked varians of legacy ivshmem that are compatible from the guest
POV, but not from host's POV and have sane specification and handling.
Details about the newer device type can be found in qemu's commit
5400c02b90bb:
http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We're keeping some things at default and that's not something we want to
do intentionally. Let's save some sensible defaults upfront in order to
avoid having problems later. The details for the defaults (of the newer
implementation) can be found in qemu's commit 5400c02b90bb:
http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb
Since we are merely saving the defaults it will not change the guest ABI
and thanks to the fact that we're doing it in the PostParse callback it
will not break the ABI stability checks.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Support for virtio disks was added in commit id 'fceeeda', but not for
SCSI drives. Add the secret for the server when hotplugging a SCSI drive.
No need to make any adjustments for unplug since that's handled during
the qemuDomainDetachDiskDevice call to qemuDomainRemoveDiskDevice in
the qemuDomainDetachDeviceDiskLive switch.
Added a test to/for the command line processing to show the command line
options when adding a SCSI drive for the guest.
Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.
Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.
Add test for at least a serial chardev as an example.
Add in the block I/O throttling length/duration parameter to the command
line if supported. If not supported, fail command creation.
Add the xml2argvtest for testing.
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There was inconsistency between alias used to create tls-creds-x509
object and alias used to link that object to chardev while hotpluging.
Hotplug ends with this error:
error: Failed to detach device from channel-tcp.xml
error: internal error: unable to execute QEMU command 'chardev-add':
No TLS credentials with id 'objcharchannel3_tls0'
In XML we have for example alias "serial0", but on qemu command line we
generate "charserial0".
The issue was that code, that creates QMP command to hotplug chardev
devices uses only the second alias "charserial0" and that alias is also
used to link the tls-creds-x509 object.
This patch unifies the aliases for tls-creds-x509 to be always generated
from "charserial0".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The code is entirely correct, but it still managed to trip me
up when I first ran into it because I did not realize right away
that VIR_PCI_CONNECT_TYPES_ENDPOINT was not a single flag, but
rather a mask including both VIR_PCI_CONNECT_TYPE_PCI_DEVICE and
VIR_PCI_CONNECT_TYPE_PCIE_DEVICE.
In order to save the next distracted traveler in PCI Address Land
some time, document this fact with a comment. Add a test case for
the behavior as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1366505
So far, this function lacked support for
VIR_DOMAIN_NET_TYPE_VHOSTUSER leaving callers to hack around the
problem by constructing the command line on their own. This is
not ideal as it blocks hot plug support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, what we do for vhost-user network is generate the
following part of command line:
-netdev type=vhost-user,id=hostnet0,chardev=charnet0
There's no need for 'type=' it is the default. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This improves commit 706b5b6277 in a way that we check qemu capabilities
instead of what architecture we are running on to detect whether we can
use *virtio-vga* model or not. This is not a case only for arm/aarch64.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch simplifies QEMU capabilities for QXL video device. QEMU
exposes this device as *qxl-vga* and *qxl* and they are both the same
device with the same set of parameters, the only difference is that
*qxl-vga* includes VGA compatibility.
Based on QEMU code they are tied together so it's safe to check only for
presence of only one of them.
This patch also removes an invalid test case "video-qxl-sec-nodevice"
where there is only *qxl-vga* device and *qxl* device is not present.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If one of QEMU_CAPS_DEVICE_QXL_VGA or QEMU_CAPS_DEVICE_QXL is set the
other one will always be set as well because both devices are tied
together in QEMU.
The change of args files is caused by the presence of capability
QEMU_CAPS_DEVICE_VIDEO_PRIMARY which means it's safe to use
"-device qxl-vga" instead of "-vga qxl", see commit (e3f2686b) and
by the fact that if QEMU_CAPS_VGA_QXL is set QEMU_CAPS_DEVICE_QXL_VGA
and QEMU_CAPS_DEVICE_QXL would be set too (since we support only qemu
with "-device" option).
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The intel-iommu device has existed since QEMU 2.2.0, but
it was only possible to create it with -device since
QEMU 2.7.0, thanks to:
commit 621d983a1f9051f4cfc3f402569b46b77d8449fc
Author: Marcel Apfelbaum <marcel@redhat.com>
Date: Mon Jun 27 18:38:34 2016 +0300
hw/iommu: enable iommu with -device
Use the standard '-device intel-iommu' to create the IOMMU device.
The legacy '-machine,iommu=on' can still be used.
The libvirt capability check & command line formatting code
is thus broken for all QEMU versions 2.2.0 -> 2.6.0 inclusive.
This fixes it to use iommu=on instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We're about to add 6 new options and it appears (from testing) one cannot
utilize both the shorthand (alias) and (much) longer names for the arguments.
So modify the command builder to use the longer name and of course alter the
test output .args to have the similarly innocuous long name.
Also utilize a macro to build that name makes it so much more visually
appealing and saves a few characters or potential cut-n-paste issues.
Signed-off-by: John Ferlan <jferlan@redhat.com>
It was missing... Also since I'm using the soft link from qemuxml2xmloutdata
to the qemuxml2argvdata file, modify the output file to have the necessary
<address> elements plus the mouse and keyboard.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If this reminds you of a commit message from around a year ago, it's
41c2aa729f and yes, we're dealing with
"the same thing" again. Or f309db1f4d and
it's similar.
There is a logic in place that if there is no real need for
memory-backend-file, qemuBuildMemoryBackendStr() returns 0. However
that wasn't the case with hugepage backing. The reason for that was
that we abused the 'pagesize' variable for storing that information, but
we should rather have a separate one that specifies whether we really
need the new object for hugepage backing. And that variable should be
set only if this particular NUMA cell needs special treatment WRT
hugepages.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372153
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The x86 CPU driver translated each CPU definition from domain XML into
CPUID data and then back to CPU definition. This effectively sorted the
list of CPU features according to their CPUID values. Since this is
going to change, we need to reorder CPU features in a few test files to
make sure the generated QEMU command lines will not change.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Adding x86 CPU models into a list of supported CPUs for non-x86
architectures is not a very good idea. Each architecture we test needs
to maintain its own list of supported CPU models.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Most of QEMU's PCI display device models, such as:
libvirt video/model/@type QEMU -device
------------------------- ------------
cirrus cirrus-vga
vga VGA
qxl qxl-vga
virtio virtio-vga
come with a linear framebuffer (sometimes called "VGA compatibility
framebuffer"). This linear framebuffer lives in one of the PCI device's
MMIO BARs, and allows guest code (primarily: firmware drivers, and
non-accelerated OS drivers) to display graphics with direct memory access.
Due to architectural reasons on aarch64/KVM hosts, this kind of
framebuffer doesn't / can't work in
qemu-system-(arm|aarch64) -M virt
machines. Cache coherency issues guarantee a corrupted / unusable display.
The problem has been researched by several people, including kvm-arm
maintainers, and it's been decided that the best way (practically the only
way) to have boot time graphics for such guests is to consolidate on
QEMU's "virtio-gpu-pci" device.
>From <https://bugzilla.redhat.com/show_bug.cgi?id=1195176>, libvirt
supports
<devices>
<video>
<model type='virtio'/>
</video>
</devices>
but libvirt unconditionally maps @type='virtio' to QEMU's "virtio-vga"
device model. (See the qemuBuildDeviceVideoStr() function and the
"qemuDeviceVideo" enum impl.)
According to the above, this is not right for the "virt" machine type; the
qemu-system-(arm|aarch64) binaries don't even recognize the "virtio-vga"
device model (justifiedly). Whereas "virtio-gpu-pci", which is a pure
virtio device without a compatibility framebuffer, is available, and works
fine.
(The ArmVirtQemu ("AAVMF") platform of edk2 -- that is, the UEFI firmware
for "virt" -- supports "virtio-gpu-pci", as of upstream commit
3ef3209d3028. See
<https://tianocore.acgmultimedia.com/show_bug.cgi?id=66>.)
Override the default mapping of "virtio", from "virtio-vga" to
"virtio-gpu-pci", if qemuDomainMachineIsVirt() evaluates to true.
Cc: Andrea Bolognani <abologna@redhat.com>
Cc: Drew Jones <drjones@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372901
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Martin Kletzander <mkletzan@redhat.com>
The test qemuxml2argv-serial-tcp-tlsx509-chardev.args
will fail if libvirt is built with a --sysconfdir
arg that is not /etc. Fix this by setting a hardcoded
path in the test code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building a chardev device string for tcp, add the necessary pieces to
access provide the TLS X.509 path to qemu. This includes generating the
'tls-creds-x509' object and then adding the 'tls-creds' parameter to the
VIR_DOMAIN_CHR_TYPE_TCP command line.
Finally add the tests for the qemu command line. This test will make use
of the "new(ish)" /etc/pki/qemu setting for a TLS certificate environment
by *not* "resetting" the chardevTLSx509certdir prior to running the test.
Also use the default "verify" option (which is "no").
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new TLS X.509 certificate type - "chardev". This will handle the
creation of a TLS certificate capability (and possibly repository) for
properly configured character device TCP backends.
Unlike the vnc and spice there is no "listen" or "passwd" associated. The
credentials eventually will be handled via a libvirt secret provided to
a specific backend.
Make use of the default verify option as well.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add support for using the new approach to hotplug vcpus using device_add
during startup of qemu to allow sparse vcpu topologies.
There are a few limitations imposed by qemu on the supported
configuration:
- vcpu0 needs to be always present and not hotpluggable
- non-hotpluggable cpus need to be ordered at the beginning
- order of the vcpus needs to be unique for every single hotpluggable
entity
Qemu also doesn't really allow to query the information necessary to
start a VM with the vcpus directly on the commandline. Fortunately they
can be hotplugged during startup.
The new hotplug code uses the following approach:
- non-hotpluggable vcpus are counted and put to the -smp option
- qemu is started
- qemu is queried for the necessary information
- the configuration is checked
- the hotpluggable vcpus are hotplugged
- vcpus are started
This patch adds a lot of checking code and enables the support to
specify the individual vcpu element with qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1182074
Since libvirt still uses a legacy qemu arg format to add a disk, the
manner in which the 'password-secret' argument is passed to qemu needs
to change to prepend a 'file.' If in the future, usage of the more
modern disk format, then the prepended 'file.' can be removed.
Fix based on Jim Fehlig <jfehlig@suse.com> posting and subsequent
upstream list followups, see:
http://www.redhat.com/archives/libvir-list/2016-August/msg00777.html
for details. Introduced by commit id 'a1344f70'.
If any of the devices referenced a USB hub that does not exist,
defining the domain would either fail with:
error: An error occurred, but the cause is unknown
(if only the last hub in the path is missing)
or crash.
Return a proper error instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1367130
More misunderstanding/mistaken assumptions on my part - I had thought
that a pci-expander-bus could be plugged into any legacy PCI slot, and
that pcie-expander-bus could be plugged into any PCIe slot. This isn't
correct - they can both be plugged ontly into their respective root
buses. This patch adds that restriction.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358712
libvirt had allowed a dmi-to-pci-bridge to be plugged in anywhere a
normal PCIe endpoint can be connected, but this is wrong - it will
only work if it's plugged into pcie-root (the PCIe root complex) or a
pcie-expander-bus (the qemu device pxb-pcie). This patch adjusts the
connection flags accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1363648
Since the introduction of CMT features (commit v1.3.5-461-gf294b83)
starting a domain with host-model CPU on a host which supports CMT fails
because QEMU complains about unknown 'cmt' feature:
qemu-system-x86_64: CPU feature cmt not found
https://bugzilla.redhat.com/show_bug.cgi?id=1355857
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The generated command line wouldn't work since QEMU doesn't know what
'cmt' is. The following patch will fix this issue.
https://bugzilla.redhat.com/show_bug.cgi?id=1355857
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In qemu, enabling this feature boils down to adding the following
onto the command line:
-global driver=cfi.pflash01,property=secure,value=on
However, there are some constraints resulting from the
implementation. For instance, System Management Mode (SMM) is
required to be enabled, the machine type must be q35-2.4 or
later, and the guest should be x86_64. While technically it is
possible to have 32 bit guests with secure boot, some non-trivial
CPU flags tuning is required (for instance lm and nx flags must
be prohibited). Given complexity of our CPU driver, this is not
trivial. Therefore I've chosen to forbid 32 bit guests for now.
If there's ever need, we can refine the check later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This element will control secure boot implemented by some
firmwares. If the firmware used in <loader/> does support the
feature we must tell it to the underlying hypervisor. However, we
can't know whether loader does support it or not just by looking
at the file. Therefore we have to have an attribute to the
element where users can tell us whether the firmware is secure
boot enabled or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since its release of 2.4.0 qemu is able to enable System
Management Module in the firmware, or disable it. We should
expose this capability in the XML. Unfortunately, there's no good
way to determine whether the binary we are talking to supports
it. I mean, if qemu's run with real machine type, the smm
attribute can be seen in 'qom-list /machine' output. But it's not
there when qemu's run with -M none. Therefore we're stuck with
version based check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow using failover with gluster it's necessary to specify multiple
volume hosts. Add support for starting qemu with such configurations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When parsing a command line with USB devices that have
no address specified, QEMU automatically adds a USB hub
if the device would fill up all the available USB ports.
To help most of the users, add one hub if there are more
USB devices than available ports. For wilder configurations,
expect the user to provide us with more hubs and/or controllers.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1301021
Generate the luks command line using the AES secret key to encrypt the
luks secret. A luks secret object will be in addition to a an AES secret.
For hotplug, check if the encinfo exists and if so, add the AES secret
for the passphrase for the secret object used to decrypt the device.
Modify/augment the fakeSecret* in qemuxml2argvtest in order to handle
find a uuid or a volume usage with a specific path prefix in the XML
(corresponds to the already generated XML tests). Add error message
when the 'usageID' is not 'mycluster_myname'. Commit id '1d632c39'
altered the error message generation to rely on the errors from the
secret_driver (or it's faked replacement).
Add the .args output for adding the LUKS disk to the domain
Signed-off-by: John Ferlan <jferlan@redhat.com>
We were requiring a USB port path in the schema, but not enforcing it.
Omitting the USB port would lead to libvirt formatting it as (null).
Such domain cannot be started and will disappear after libvirtd restart
(since it cannot parse back the XML).
Only format the port if it has been specified and mark it as optional
in the XML schema.
Commit id's '9bbf0d7e6' and '2552fec24' added some XML parsing tests
for a LUKS volume to use a 'passphrase' secret format. After commit,
this was deemed to be incorrect, so covert the various tests to use
the volume usage format where the 'usage' is the path to the volume
rather than a user defined name string.
Also, removed the qemuxml2argv-luks-disk-cipher.xml since it was
just a duplicate of qemuxml2argv-luks-disks.xml.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This makes the search for related XMLs easier, plus they are not used in
the xml2argv tests anyway. This also makes future patches cleaner.
While on that remove unnecessary '-hotplug' from the filenames.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is preferrable to -nographic which (in addition to disabling
graphics output) redirects the serial port to stdio and on OpenBIOS
enables the firmware's serial console.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For type='ethernet' interfaces only.
(This patch had been pushed earlier in
commit 0b4645a7e0, but was reverted in
commit 84d47a3cce because it had been
accidentally pushed during the freeze for release 2.0.0)
In order to use more common code and set up for a future type, modify the
encryption secret to allow the "usage" attribute or the "uuid" attribute
to define the secret. The "usage" in the case of a volume secret would be
the path to the volume as dictated by the backwards compatibility brought
on by virStorageGenerateQcowEncryption where it set up the usage field as
the vol->target.path and didn't allow someone to provide it. This carries
into virSecretObjListFindByUsageLocked which takes the secret usage attribute
value from from the domain disk definition and compares it against the
usage type from the secret definition. Since none of the code dealing
with qcow/qcow2 encryption secrets uses usage for lookup, it's a mostly
cosmetic change. The real usage comes in a future path where the encryption
is expanded to be a luks volume and the secret will allow definition of
the usage field.
This code will make use of the virSecretLookup{Parse|Format}Secret common code.
Signed-off-by: John Ferlan <jferlan@redhat.com>
I'm not sure why our code claimed "-boot menu=on" cannot be used in
combination with per-device bootindex, but it was proved wrong about
four years ago by commit 8c952908. Let's always use bootindex when QEMU
supports it.
https://bugzilla.redhat.com/show_bug.cgi?id=1323085
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Verify that SCSI controllers get created automatically when a SCSI disk
is hot-plugged to a domain that doesn't have a matching SCSI controller
defined already.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Make them work again... The xml2xml had been working, but the xml2argv
were not working. Making the xml2argv work required a few adjustments to
the xml to update to more recent times.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The '-usb' option doesn't have any effect for aarch64 mach-virt
guests, so the fact that it's currently enabled by default is not
really causing any issue.
However, that might change in the future (although unlikely), and
having it as part of the QEMU command line can cause confusion to
someone looking through the process list.
Avoid it completely, like it's already happening for q35.
There has been some progress lately in enabling virtio-pci on
aarch64 guests; however, guest OS support is still spotty at best,
so most guests are going to be using virtio-mmio instead.
Currently, mach-virt guests are closely modeled after q35 guests,
and that includes always adding a dmi-to-pci-bridge that's just
impossible to get rid of. While that's acceptable (if suboptimal)
for q35, where you will always need some kind of PCI device anyway,
mach-virt guests should be allowed to avoid it.
Until now, a Q35 domain (or arm/virt, or any other domain that has a
pcie-root bus) would always have a pci-bridge added, so that there
would be a hotpluggable standard PCI slot available to plug in any PCI
devices that might be added. This patch removes the explicit add,
instead relying on the pci-bridge being auto-added during PCI address
assignment (it will add a pci-bridge if there are no free slots).
This doesn't eliminate the dmi-to-pci-bridge controller that is
explicitly added whether or not a standard PCI slot is required (and
that is almost never used as anything other than a converter between
pcie.0's PCIe slots and standard PCI). That will be done separately.
This option allows or disallows detection of zero-writes if it is set to
"on" or "off", respectively. It can be also set to "unmap" in which
case it will try discarding that part of image based on the value of the
"discard" option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This new listen type is currently supported only by spice graphics.
It's introduced to make it easier and clearer specify to not listen
anywhere in order to start a guest with OpenGL support.
The old way to do this was set spice graphics autoport='no' and don't
specify any ports. The new way is to use <listen type='none'/>. In
order to be able to migrate to old libvirt the migratable XML will be
generated without the listen element and with autoport='no'. Also the
old configuration will be automatically converted to the this listen
type.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.
For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs. If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.
To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Until now, the only hot thing in this test was the name. That's because
we set the id to '-1' before every test. With this change, we test the
hotplug on live domains as the name suggests and as it should be.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Historically, we added heads=1 to videos, but for example for qxl, we
did not reflect that on the command line.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283207
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Hand-entering indexes for 20 PCI controllers is not as tedious as
manually determining and entering their PCI addresses, but it's still
annoying, and the algorithm for determining the proper index is
incredibly simple (in all cases except one) - just pick the lowest
unused index.
The one exception is USB2 controllers because multiple controllers in
the same group have the same index. For these we look to see if 1) the
most recently added USB controller is also a USB2 controller, and 2)
the group *that* controller belongs to doesn't yet have a controller
of the exact model we're just now adding - if both are true, the new
controller gets the same index, but in all other cases we just assign
the lowest unused index.
With this patch in place and combined with the automatic PCI address
assignment, we can define a PCIe switch with several ports like this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-switch-upstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
...
These will each get a unique index, and PCI addresses that connect
them together appropriately with no pesky numbers required.
<os>
<acpi>
<table type="slic">/path/to/acpi/table/file</table>
</acpi>
</os>
will result in:
-acpitable sig=SLIC,file=/path/to/acpi/table/file
This option was introduced by QEMU commit 8a92ea2 in 2009.
https://bugzilla.redhat.com/show_bug.cgi?id=1327537
Add a new element to <domain> XML:
<os>
<acpi>
<table type="slic">/path/to/acpi/table/file</table>
</acpi>
</os>
To supply a path to a SLIC (Software Licensing) ACPI
table blob.
https://bugzilla.redhat.com/show_bug.cgi?id=1327537
This test requests a read-only virtual FAT drive on the IDE bus.
Read-only IDE drives are unsupported, but libvirt only displays
the error if it has the QEMU_CAPS_DRIVE_READONLY capability.
Read-write FAT drives are also unsupported.
Rather than only assigning a PCI address when no address is given at
all, also do it when the config says that the address type is 'pci',
but it gives no address (virDeviceInfoPCIAddressWanted()).
There are also several places after parsing but prior to address
assignment where code previously expected that any info with address
type='pci' would have a *valid* PCI address, which isn't always the
case - now we check not only for type='pci', but also for a valid
address (virDeviceInfoPCIAddressPresent()).
The test case added in this patch was directly copied from Cole's patch titled:
qemu: Wire up address type=pci auto_allocate
https://bugzilla.redhat.com/show_bug.cgi?id=1182074
If they're available and we need to pass secrets to qemu, then use the
qemu domain secret object in order to pass the secrets for RBD volumes
instead of passing the base64 encoded secret on the command line.
The goal is to make AES secrets the default and have no user interaction
required in order to allow using the AES mechanism. If the mechanism
is not available, then fall back to the current plain mechanism using
a base64 encoded secret.
New APIs:
qemu_domain.c:
qemuDomainGetSecretAESAlias:
Generate/return the secret object alias for an AES Secret Info type.
This will be called from qemuDomainSecretAESSetup.
qemuDomainSecretAESSetup: (private)
This API handles the details of the generation of the AES secret
and saves the pieces that need to be passed to qemu in order for
the secret to be decrypted. The encrypted secret based upon the
domain master key, an initialization vector (16 byte random value),
and the stored secret. Finally, the requirement from qemu is the IV
and encrypted secret are to be base64 encoded.
qemu_command.c:
qemuBuildSecretInfoProps: (private)
Generate/return a JSON properties object for the AES secret to
be used by both the command building and eventually the hotplug
code in order to add the secret object. Code was designed so that
in the future perhaps hotplug could use it if it made sense.
qemuBuildObjectSecretCommandLine (private)
Generate and add to the command line the -object secret for the
secret. This will be required for the subsequent RBD reference
to the object.
qemuBuildDiskSecinfoCommandLine (private)
Handle adding the AES secret object.
Adjustments:
qemu_domain.c:
The qemuDomainSecretSetup was altered to call either the AES or Plain
Setup functions based upon whether AES secrets are possible (we have
the encryption API) or not, we have secrets, and of course if the
protocol source is RBD.
qemu_command.c:
Adjust the qemuBuildRBDSecinfoURI API's in order to generate the
specific command options for an AES secret, such as:
-object secret,id=$alias,keyid=$masterKey,data=$base64encodedencrypted,
format=base64
-drive file=rbd:pool/image:id=myname:auth_supported=cephx\;none:\
mon_host=mon1.example.org\:6321,password-secret=$alias,...
where the 'id=' value is the secret object alias generated by
concatenating the disk alias and "-aesKey0". The 'keyid= $masterKey'
is the master key shared with qemu, and the -drive syntax will
reference that alias as the 'password-secret'. For the -drive
syntax, the 'id=myname' is kept to define the username, while the
'key=$base64 encoded secret' is removed.
While according to the syntax described for qemu commit '60390a21'
or as seen in the email archive:
https://lists.gnu.org/archive/html/qemu-devel/2016-01/msg04083.html
it is possible to pass a plaintext password via a file, the qemu
commit 'ac1d8878' describes the more feature rich 'keyid=' option
based upon the shared masterKey.
Add tests for checking/comparing output.
NB: For hotplug, since the hotplug code doesn't add command line
arguments, passing the encoded secret directly to the monitor
will suffice.
Commit 55320c23 introduced a new test for VNC to test if
vnc_auto_unix_socket is set in qemu.conf, but forget to enable it in
qemuxml2argvtest.c.
This patch also moves the code in qemuxml2xmltest.c next to other VNC
tests and refactor the test so we also check the case for parsing active
XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There's no reason for keeping the features in a linked list. Especially
when we know upfront the total number of features we are loading.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The only case where the hardware capabilities influence the result
is when no <gic/> element was provided.
The test programs now ensure both that the correct GIC version is
picked in that case, and that hardware capabilities are not taken
into account when the user has already picked a GIC version.
libvirt may automatically add a pci-root or pcie-root controller to a
domain, depending on the arch/machinetype, and it hopefully always
makes the right decision about which to add (since in all cases these
controllers are an implicit part of the virtual machine).
But it's always possible that someone will create a config that
explicitly supplies the wrong type of PCI controller for the selected
machinetype. In the past that would lead to an error later when
libvirt was trying to assign addresses to other devices, for example:
XML error: PCI bus is not compatible with the device at
0000:00:02.0. Device requires a PCI Express slot, which is not
provided by bus 0000:00
(that's the error message that appears if you replace the pcie-root
controller in a Q35 domain with a pci-root controller).
This patch adds a check at the same place that the implicit
controllers are added (to ensure that the same logic is used to check
which type of pci root is correct). If a pci controller with index='0'
is already present, we verify that it is of the model that we would
have otherwise added automatically; if not, an error is logged:
The PCI controller with index='0' must be " model='pcie-root' for
this machine type, " but model='pci-root' was found instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1004602
https://bugzilla.redhat.com/show_bug.cgi?id=1286709
Now that we have all the pieces in place, we can add the 'iothread=#' to
the command line for the (two) controllers that support it (virtio-scsi-pci
and virtio-scsi-ccw). Add the tests as well...
Add the ability to add an 'iothread' to the controller which will be how
virtio-scsi-pci and virtio-scsi-ccw iothreads have been implemented in qemu.
Describe the new functionality and add tests to parse/validate that the
new attribute can be added.
This adds a ports= attribute to usb controller XML, like
<controller type='usb' model='nec-xhci' ports='8'/>
This maps to:
qemu -device nec-usb-xhci,p2=8,p3=8
Meaning, 8 ports that support both usb2 and usb3 devices. Gerd
suggested to just expose them as one knob.
https://bugzilla.redhat.com/show_bug.cgi?id=1271408
Similarly to what commit 7140807917 did with some internal paths,
clear vnc socket paths that were generated by us. Having such path in
the definition can cause trouble when restoring the domain. The path is
generated to the per-domain directory that contains the domain ID.
However, that ID will be different upon restoration, so qemu won't be
able to create that socket because the directory will not be prepared.
To be able to migrate to older libvirt, skip formatting the socket path
in migratable XML if it was autogenerated. And mark it as autogenerated
if it already exists and we're parsing live XML.
Best viewed with '-C'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1326270
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently we only allow /dev/random and /dev/hwrng as host input
for <rng><backend model='random'/> device. This was added after
various upstream discussions in commit 4932ef45
However this restriction has generated quite a few complaints over
the years, so a new discussion was initiated:
http://www.redhat.com/archives/libvir-list/2016-April/msg00987.html
Several people suggested removing the restriction, and nobody really
spoke up to defend it. So this patch drops the path restriction
entirely
https://bugzilla.redhat.com/show_bug.cgi?id=1074464
While working on the tests for the secret initialization vector, I found
that the existing iSCSI tests were lacking in how they defined the IQN.
Many had IQN's of just 'iqn.1992-01.com.example' for one disk while using
'iqn.1992-01.com.example/1' for the second disk (same for hostdevs - guess
how they were copied/generated).
Typically (and documented this way), IQN's would include be of the form
'iqn.1992-01.com.example:storage/1' indicating an IQN using "storage" for
naming authority specific string and "/1" for the iSCSI LUN.
So modify the input XML's to use the more proper format - this of course
has a ripple effect on the output XML and the args.
Also note that the "%3A" is generated by the virURIFormat/xmlSaveUri
to represent the colon.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This is backed by the qemu device pxb-pcie, which will be available in
qemu 2.6.0.
As with pci-expander-bus (which uses qemu's pxb device), the busNr
attribute and <node> subelement of <target> are used to set the bus_nr
and numa_node options.
During post-parse we validate that the domain's machinetype is
q35-based (since the device shows up for 440fx-based machinetypes, but
is unusable), as well as checking that <node> specifies a node that is
actually configured on the guest.
This controller provides a single PCIe port on a new root. It is
similar to pci-expander-bus, intended to provide a bus that can be
associated with a guest-identifiable NUMA node, but is for
machinetypes with PCIe rather than PCI (e.g. q35-based machinetypes).
Aside from PCIe vs. PCI, the other main difference is that a
pci-expander-bus has a companion pci-bridge that is automatically
attached along with it, but pcie-expander-bus has only a single port,
and that port will only connect to a pcie-root-port, or to a
pcie-switch-upstream-port. In order for the bus to be of any use in
the guest, it must have either a pcie-root-port or a
pcie-switch-upstream-port attached (and one or more
pcie-switch-downstream-ports attached to the
pcie-switch-upstream-port).
This is backed by the qemu device "pxb".
The pxb device always includes a pci-bridge that is at the bus number
of the pxb + 1.
busNr and <node> from the <target> subelement are used to set the
bus_nr and numa_node options for pxb.
During post-parse we validate that the domain's machinetype is
440fx-based (since the pxb device only works on 440fx-based machines),
and <node> also gets a sanity check to assure that the NUMA node
specified for the pxb (if any - it's optional) actually exists on the
guest.
This is a standard PCI root bus (not a bridge) that can be added to a
440fx-based domain. Although it uses a PCI slot, this is *not* how it
is connected into the PCI bus hierarchy, but is only used for
control. Each pci-expander-bus provides 32 slots (0-31) that can
accept hotplug of standard PCI devices.
The usefulness of pci-expander-bus relative to a pci-bridge is that
the NUMA node of the bus can be specified with the <node> subelement
of <target>. This gives guest-side visibility to the NUMA node of
attached devices (presuming that management apps only assign a device
to a bus that has a NUMA node number matching the node number of the
device on the host).
Each pci-expander-bus also has a "busNr" attribute. The expander-bus
itself will take the busNr specified, and all buses that are connected
to this bus (including the pci-bridge that is automatically added to
any expander bus of model "pxb" (see the next commit)) will use
busNr+1, busNr+2, etc, and the pci-root (or the expander-bus with next
lower busNr) will use bus numbers lower than busNr.
When support for dmi-to-pci-bridge was added, it was assumed that,
just as with the pci-root bus, slot 0 was reserved. This is not the
case - it can be used to connect a device just like any other slot, so
remove the restriction and update the test cases that auto-assign an
address on a dmi-to-pci-bridge.
Commit dc98a5bc refactored the code a lot and forget about checking if
listen attribute is specified. This ensures that listen attribute and
first listen element are compared only if both exist.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
After the test and qemu_process refactor now we can benefit from default
listen address for spice and vnc in tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Some places already check for "virt-" prefix as well as plain "virt".
virQEMUCapsHasPCIMultiBus did not, resulting in multiple PCI devices
having assigned the same unnumbered "pci" alias.
Add a test for the "virt-2.6" machine type which also omits the
<model type='virtio'/> in <interface>, to check if
qemuDomainDefaultNetModel works too.
https://bugzilla.redhat.com/show_bug.cgi?id=1325085
If the -object secret capability exists, then get the path to the
masterKey file and provide that to qemu. Checking for the existence
of the file before passing to qemu could be done, but causes issues
in mock test environment.
Since the qemuDomainObjPrivate is not available when building the
command line, the qemuBuildHasMasterKey API will have to suffice
as the primary arbiter for whether the capability exists in order
to find/return the path to the master key for usage.
Created the qemuDomainGetMasterKeyAlias API which will be used by
later patches to define the 'keyid' (eg, masterKey) to be used by
other secrets to provide the id to qemu for the master key.
This patch adds support for "vpindex", "runtime", "synic",
"stimer", and "vendor_id" features available in qemu 2.5+.
- When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX
to get virtual processor ID.
- Hyper-V "runtime" enlightement feature allows to use MSR
HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes
running guest code, as well as the time the hypervisor spends running
code on behalf of that guest.
- Hyper-V "synic" stands for Synthetic Interrupt Controller, which is
lapic extension controlled via MSRs.
- Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support.
Guest can setup and use fired by host events (SynIC interrupt and
appropriate timer expiration message) as guest clock events
- Hyper-V "reset" allows guest to reset VM.
- Hyper-V "vendor_id" exposes hypervisor vendor id to guest.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
After 9c17d665fd the tap device for ethernet network type is
automatically precreated before spawning qemu. Problem is, the
qemuxml2argvtest wasn't updated and thus is failing. Because of
all the APIs that new code is calling, I had to mock a lot. Also,
since the tap FDs are labeled separately from the rest of the
devices/files I had to enable NOP security driver for the test
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Update testutilsqemu to overwrite libDir and channelTargetDir and set
private paths using domain's privateData. This changes is required for
following patch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If a <graphics type='spice'> has no port nor tlsPort set, the generated
QEMU command line will contain -spice port=0.
This is later going to be ignored by spice-server, but it's better not
to add it at all in this situation.
As an empty -spice is not allowed, we still need to append port=0 if we
did not add any other argument.
When debug-threads is enabled, individual threads are given a separate
name (on Linux)
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1140121
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Honour the <log file='...'/> element in chardevs to output
data to a file. This requires QEMU >= 2.6
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory. It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar. If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We always place primary video device at first place, to make it easier
to create a qemu command or format an xml, but we should also set the
primary boolean for primary video device to 'true'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.
Add a qemuxml2argv test for virtio-gpu + spice with virgl.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca334). However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited. In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains). That way we can change it
in the future.
The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit f1a89a8 allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.
Check for the presence of a machine type in the qemu driver's
post parse function instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1267256
