CPU features are not supported on non-x86 and hasFeatures will be NULL.
This patch is to remove CPU features functions calling to avoid errors.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
This patch changes virFileLoopDeviceOpen() to use the new loop-control
device to allocate a new loop device. If this behavior is unsupported
we fall back to the previous method of searching /dev for a free device.
With this patch you can start as many image based LXC domains as you
like (well almost).
Fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=995543
Right now, securityfs is disallowed to be mounted in non-initial
user namespace, so we must avoid trying to mount securityfs in
a container which has user namespace enabled.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
The ESX code has a method esxVI_Alloc which would call
virAllocN directly, instead of using the VIR_ALLOC_N
macro. Remove this method and make the callers just
use VIR_ALLOC as is normal practice.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Delete the USB controller check from the USB Device checklist in
virDomainDeviceIsUSB as USB controller is a PCI device rather than
a USB one.
Signed-off-by: Liu Ji <jeremy.liu@huawei.com>
The s390, ppc and arm CPU drivers never set the 'arch' field
in their impl of cpuArchNodeData. This leads to error messages
being reported from cpuDataFree later, due to trying to use
VIR_ARCH_NONE.
#0 virRaiseErrorFull (filename=filename@entry=0x76f94434 "cpu/cpu.c", funcname=funcname@entry=0x76f942dc <__FUNCTION__.18096> "cpuGetSubDriver", linenr=linenr@entry=58,
domain=domain@entry=31, code=code@entry=1, level=level@entry=VIR_ERR_ERROR, str1=0x76f70e18 "internal error: %s",
str2=str2@entry=0x7155f2ec "undefined hardware architecture", str3=str3@entry=0x0, int1=int1@entry=-1, int2=int2@entry=-1, fmt=0x76f70e18 "internal error: %s")
at util/virerror.c:646
#1 0x76e682ea in virReportErrorHelper (domcode=domcode@entry=31, errorcode=errorcode@entry=1, filename=0x76f94434 "cpu/cpu.c",
funcname=0x76f942dc <__FUNCTION__.18096> "cpuGetSubDriver", linenr=linenr@entry=58, fmt=0x76f7e7e4 "%s") at util/virerror.c:1292
#2 0x76ed82d4 in cpuGetSubDriver (arch=<optimized out>) at cpu/cpu.c:57
#3 cpuGetSubDriver (arch=VIR_ARCH_NONE) at cpu/cpu.c:51
#4 0x76ed8818 in cpuDataFree (data=data@entry=0x70c22d78) at cpu/cpu.c:216
#5 0x716aaec0 in virQEMUCapsInitCPU (arch=VIR_ARCH_ARMV7L, caps=0x70c29a08) at qemu/qemu_capabilities.c:867
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
No need to open code now that we have a nice function.
Interestingly, our virStringFreeList function is typed correctly
(a malloc'd list of malloc'd strings is NOT const, whether at the
point where it is created, or at the point where it is cleand up),
so using it with a 'const char **' argument would require a cast
to keep the compiler. I chose instead to remove const from code
even where we don't modify the argument, just to avoid the need
to cast.
* src/qemu/qemu_command.h (qemuParseCommandLine): Drop declaration.
* src/qemu/qemu_command.c (qemuParseProcFileStrings)
(qemuStringToArgvEnv): Don't force malloc'd result to be const.
(qemuParseCommandLinePid, qemuParseCommandLineString): Simplify
cleanup.
(qemuParseCommandLine, qemuFindEnv): Drop const-correctness to
avoid the need to cast in callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
In commit 991270db99 I've used virDomainNetGetActualHostdev() to get
the actual hostdev from a network when removing the network from the
list to avoid leaving the hostdev in the list. I didn't notice that this
function doesn't check if the actual network is allocated and
dereferences it. This crashes the daemon when cleaning up a domain
object in early startup phases when the actual network definition isn't
allocated. When the actual definition isn't present, the hostdev that
might correspond to it won't be present anyways so it's safe to return
NULL.
Thanks to Cole Robinson for noticing this problem.
No need to check if privileged when reading hostsysinfo, since
that check was already done in libxlDriverShouldLoad(). The
libxl driver fails to load if not privileged.
John Ferlan reported the following Coverity warning:
In libxlDomainCoreDump() Coverity has noted a FORWARD_NULL reference:
2004 if ((flags & VIR_DUMP_CRASH) && !vm->persistent) {
2005 virDomainObjListRemove(driver->domains, vm);
(20) Event assign_zero: Assigning: "vm" = "NULL".
Also see events: [var_deref_model]
2006 vm = NULL;
2007 }
2008
2009 ret = 0;
2010
2011 cleanup_unpause:
(21) Event var_deref_model: Passing null pointer "vm" to function
"virDomainObjIsActive(virDomainObjPtr)", which dereferences it. [details]
Also see events: [assign_zero]
2012 if (virDomainObjIsActive(vm) && paused) {
2013 if (libxl_domain_unpause(priv->ctx, dom->id) != 0) {
2014 virReportError(VIR_ERR_INTERNAL_ERROR,
Removing the vm from domain obj list and setting it to NULL can be
done in the previous 'if (flags & VIR_DUMP_CRASH)' conditional. Fix
the Coverity warning by ensuring vm is not NULL before testing if it
is still active.
daemon/Makefile.am installs a .policy file if WITH_LIBVIRTD and
WITH_POLKIT are both set. src/Makefile.am, on the other hand,
installs a .policy file if WITH_POLKIT1 is set, but without checking
WITH_LIBVIRTD. When running 'make rpm' with client_only manually
set, on a Fedora 19 box, that leads to a failure:
RPM build errors:
Installed (but unpackaged) file(s) found:
/usr/share/polkit-1/actions/org.libvirt.api.policy
Fix it by adding another conditional.
* src/Makefile.am (polkitaction_DATA): Make conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
When virGetUserEnt() and virGetGroupEnt() fail due to the uid or gid not
existing on the machine they'll print a message like:
$ virsh -c vbox:///session list
error: failed to connect to the hypervisor
error: Failed to find user record for uid '32655': Success
The success at the end is a bit confusing. This changes it to:
$ virsh -c vbox:///session list
error: failed to connect to the hypervisor
error: Failed to find user record for uid '32655'
Automake has builtin support to prevent botched conditional nesting,
but only if you use:
if FOO
else !FOO
endif !FOO
An example error message when using the wrong name:
daemon/Makefile.am:378: error: else reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
daemon/Makefile.am:381: error: endif reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
As our makefiles tend to have quite a bit of nested conditionals,
it's better to take advantage of the benefits of the build system
double-checking that our conditionals are well-nested, but that
requires a syntax check to enforce our usage style.
Alas, unlike C preprocessor and spec files, we can't use indentation
to make it easier to see how deeply nesting goes.
* cfg.mk (sc_makefile_conditionals): New rule.
* daemon/Makefile.am: Enforce the style.
* gnulib/tests/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'uuid' field in virDomainDefPtr is not a pointer, it is a
fixed length array. Calling VIR_ALLOC on it is thus wrong and
leaks memory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 50348e6edf reused the code to remove the hostdev portion of a
network definition on multiple places but forgot to take into account
that sometimes the "actual" network is passed and in some cases the
parent of that.
This patch uses the virDomainNetGetActualHostdev() helper to acquire the
correct pointer all the time while removing the hostdev portion from the
list.
https://bugzilla.redhat.com/show_bug.cgi?id=999352
Since commit v1.0.5-56-g449e6b1 (Pull parsing of migration xml up into
QEMU driver APIs) any attempt to rename a domain during migration fails
with the following error message:
internal error Incoming cookie data had unexpected name DOM vs DOM2
This is because migration cookies always use the original domain name
and the mentioned commit failed to propagate the name back to
qemuMigrationPrepareAny.
Now that most fields of libxlDriverPrivate struct are immutable
or self-locking, there is no need to acquire the driver lock in
much of the libxl driver.
The libxlDriverPrivate struct contains an variety of data with
varying access needs. Similar to the QEMU and LXC drivers,
move all the static config data into a dedicated libxlDriverConfig
object. The only locking requirement is to hold the driver lock
while obtaining an instance of libxlDriverConfig. Once a reference
is held on the config object, it can be used completely lockless
since it is immutable.
libxlDomainGetInfo() uses the driver-wide libxl ctx when
it would be more appropriate to use the per-domain ctx
associated with the domain. Switch to using the per-domain
libxl ctx.
libxlMakeDomCreateInfo() uses the driver-wide libxl ctx when
it would be more appropriate to use the per-domain ctx
associated with the domain. Switch to using the per-domain
libxl ctx.
libxl version info is static data as far as the libxl driver
is concerned, so retrieve this info when the driver is initialized
and stash it in the libxlDriverPrivate object. Subsequently use
the stashed info instead of repeatedly calling libxl_get_version_info().
Detect early on in libxl driver initialization if the driver
should be loaded at all, avoiding needless initialization steps
that only have to be undone later. While at it, move the
detection to a helper function to improve readability.
After detecting that the driver should be loaded, subsequent
failures such as initializing the log stream, allocating libxl
ctx, etc. should be treated as failure to initialize the driver.
Create libxl_domain.[ch] and move all functions operating on
libxlDomainObjPrivate to these files. This will be useful for
future patches that e.g. add job support for libxlDomainObjPrivate.
New coverity installation determined that the muliple if condition for
"*Alloc" and "*AppendToList" could fail during AppendToList thus leaking
memory.
Currently, kernel supports up to 8 queues for a multiqueue tap device.
However, if user tries to enter a huge number (e.g. one million) the tap
allocation fails, as expected. But what is not expected is the log full
of warnings:
warning : virFileClose:83 : Tried to close invalid fd 0
The problem is, upon error we iterate over an array of FDs (handlers to
queues) and VIR_FORCE_CLOSE() over each item. However, the array is
pre-filled with zeros. Hence, we repeatedly close stdin. Ouch.
But there's more. The queues allocation is done in virNetDevTapCreate()
which cleans up the FDs in case of error. Then, its caller, the
virNetDevTapCreateInBridgePort() iterates over the FD array and tries to
close them too. And so does qemuNetworkIfaceConnect() and
qemuBuildInterfaceCommandLine().
According to VMWare's documentation 'cdrom-raw' is an acceptable value
for deviceType for a CD-ROM drive. The documentation states that the VMX
configuration for a CD-ROM deviceType is as follows:
ide|scsi(n):(n).deviceType = "cdrom-raw|atapi-cdrom|cdrom-image"
From the documentation it appears the following is true:
- cdrom-image = Provides the ISO to the VM
- atapi-cdrom = Provides a NEC emulated ATAPI CD-ROM on top of the host
CD-ROM
- cdrom-raw = Passthru for a host CD-ROM drive. Allows CD-R burning from
within the guest.
A CD-ROM prior to this patch would always provide an 'atapi-cdrom' is
modeled as:
<disk type='block' device='cdrom'>
<source dev='/dev/scd0'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
This patch allows the 'device' attribute to be set to 'lun' for a raw
acccess CD-ROM such as:
<disk type='block' device='lun'>
<source dev='/dev/scd0'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
Sometimes a serial port might not be actually wired to a device when the
user does not have the VM powered on and we should not consider this a
fatal error.
Starting with qemu 1.6, the qemu-system-arm vexpress-a9 model has a
hardcoded virtio-mmio transport which enables attaching all virtio
devices.
On the command line, we have to use virtio-XXX-device rather than
virtio-XXX-pci, thankfully s390 already set the precedent here so
it's fairly straight forward.
At the XML level, this adds a new device address type virtio-mmio.
The controller and addressing don't have any subelements at the
moment because we they aren't needed for this usecase, but could
be added later if needed.
Add a test case for an ARM guest with one of every virtio device
enabled.
Similar to the chardev bit, ARM boards depend on the old style '-net nic'
for actually instantiating net devices. But we can't block out
-netdev altogether since it's needed for upcoming virtio support.
And add tests for working ARM XML with console, disk, and networking.
This corresponds to '-sd' and '-drive if=sd' on the qemu command line.
Needed for many ARM boards which don't provide any other way to
pass in storage.
QEMU ARM boards don't give us any way to explicitly wire in
a -chardev, so use the old style -serial options.
Unfortunately this isn't as simple as just turning off the CHARDEV flag
for qemu-system-arm, as upcoming virtio support _will_ use device/chardev.
On my machine, a guest fails to boot if it has a sound card, but not
graphical device/display is configured, because pulseaudio fails to
initialize since it can't access $HOME.
A workaround is removing the audio device, however on ARM boards there
isn't any option to do that, so -nographic always fails.
Set QEMU_AUDIO_DRV=none if no <graphics> are configured. Unfortunately
this has massive test suite fallout.
Add a qemu.conf parameter nographics_allow_host_audio, that if enabled
will pass through QEMU_AUDIO_DRV from sysconfig (similar to
vnc_allow_host_audio)
Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.
To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow use of the usb-storage device only if the new capability flag
QEMU_CAPS_DEVICE_USB_STORAGE is set, which it is for qemu(-kvm)
versions >= 0.12.1.2-rhel62-beta.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
virVMXFormatHardDisk() and virVMXFormatCDROM() duplicated a lot of code
from each other and made a lot of nested if checks to build each part of
the VMX file. This hopefully simplifies the code path while combining
the two functions with no net difference.
Since virtlockd is only built when libvirtd is built, we should
not install its auxiliary files unconditionally. This solves
two failures. 1. 'make distcheck' complains:
rm -f Makefile
ERROR: files left in build directory after distclean:
./src/virtlockd.8
2. './autobuild.sh' complains:
Checking for unpackaged file(s): /usr/lib/rpm/check-files
/home/eblake/rpmbuild/BUILDROOT/mingw-libvirt-1.1.1-1.fc19.eblake1377879911.x86_64
error: Installed (but unpackaged) file(s) found:
/usr/i686-w64-mingw32/sys-root/mingw/etc/libvirt/virtlockd.conf
/usr/i686-w64-mingw32/sys-root/mingw/share/augeas/lenses/tests/test_virtlockd.aug
/usr/i686-w64-mingw32/sys-root/mingw/share/augeas/lenses/virtlockd.aug
/usr/i686-w64-mingw32/sys-root/mingw/share/man/man8/virtlockd.8
/usr/x86_64-w64-mingw32/sys-root/mingw/etc/libvirt/virtlockd.conf
/usr/x86_64-w64-mingw32/sys-root/mingw/share/augeas/lenses/tests/test_virtlockd.aug
/usr/x86_64-w64-mingw32/sys-root/mingw/share/augeas/lenses/virtlockd.aug
/usr/x86_64-w64-mingw32/sys-root/mingw/share/man/man8/virtlockd.8
* src/Makefile.am (CLEANFILES): Add virtlockd.8.
(man8_MANS, conf_DATA, augeas_DATA, augeastest_DATA): Only install
virtlockd files when daemon is built.
Signed-off-by: Eric Blake <eblake@redhat.com>
vhost only works in KVM mode at the moment, and is infact compiled
out if the emulator is built for non-native architecture. While it
may work at some point in the future for plain qemu, for now it's
just noise on the command line (and which contributes to arm cli
breakage).
FreeBSD 10 recently changed their definition of RAND_MAX, to try
and cover the fact that their evenly distributed results of rand()
really are a smaller range than a full power of 2. As a result,
I did some investigation, and learned:
1. POSIX requires random() to be evenly distributed across exactly
31 bits. glibc also guarantees this for rand(), but the two are
unrelated, and POSIX only associates RAND_MAX with rand().
Avoiding RAND_MAX altogether thus avoids a build failure on
FreeBSD 10.
2. Concatenating random bits from a PRNG will NOT provide uniform
coverage over the larger value UNLESS the period of the original
PRNG is at least as large as the number of bits being concatenated.
Simple example: suppose that RAND_MAX were 1 with a period of 2**1
(which means that the PRNG merely alternates between 0 and 1).
Concatenating two successive rand() calls would then invariably
result in 01 or 10, which is a rather non-uniform distribution
(00 and 11 are impossible) and an even worse period (2**0, since
our second attempt will get the same number as our first attempt).
But a RAND_MAX of 1 with a period of 2**2 (alternating between
0, 1, 1, 0) provides sane coverage of all four values, if properly
tempered. (Back-to-back calls would still only see half the values
if we don't do some tempering). We therefore want to guarantee a
period of at least 2**64, preferably larger (as a tempering factor);
POSIX only makes this guarantee for random() with 256 bytes of info.
* src/util/virrandom.c (virRandomBits): Use constants that are
accurate for the PRNG we are using, not an unrelated PRNG.
(randomState): Ensure the period of our PRNG exceeds our usage.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 29fe5d7 (released in 1.1.1) introduced a latent problem
for any caller of virSecurityManagerSetProcessLabel and where
the domain already had a uid:gid label to be parsed. Such a
setup would collect the list of supplementary groups during
virSecurityManagerPreFork, but then ignores that information,
and thus fails to call setgroups() to adjust the supplementary
groups of the process.
Upstream does not use virSecurityManagerSetProcessLabel for
qemu (it uses virSecurityManagerSetChildProcessLabel instead),
so this problem remained latent until backporting the initial
commit into v0.10.2-maint (commit c061ff5, released in 0.10.2.7),
where virSecurityManagerSetChildProcessLabel has not been
backported. As a result of using a different code path in the
backport, attempts to start a qemu domain that runs as qemu:qemu
will end up with supplementary groups unchanged from the libvirtd
parent process, rather than the desired supplementary groups of
the qemu user. This can lead to failure to start a domain
(typical Fedora setup assigns user 107 'qemu' to both group 107
'qemu' and group 36 'kvm', so a disk image that is only readable
under kvm group rights is locked out). Worse, it is a security
hole (the qemu process will inherit supplemental group rights
from the parent libvirtd process, which means it has access
rights to files owned by group 0 even when such files should
not normally be visible to user qemu).
LXC does not use the DAC security driver, so it is not vulnerable
at this time. Still, it is better to plug the latent hole on
the master branch first, before cherry-picking it to the only
vulnerable branch v0.10.2-maint.
* src/security/security_dac.c (virSecurityDACGetIds): Always populate
groups and ngroups, rather than only when no label is parsed.
Signed-off-by: Eric Blake <eblake@redhat.com>
The return values for the virConnectListAllSecrets call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllNWFilters call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllNodeDevices call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllInterfaces call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllNetworks call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virStoragePoolListAllVolumes call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllStoragePools call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllDomains call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virDomain{SnapshotListAllChildren,ListAllSnapshots}
calls were not bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virDomainGetJobStats call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The parameters for the virDomainMigrate*Params RPC calls were
not bounds checks, meaning a malicious client can cause libvirtd
to consume arbitrary memory
This issue was introduced in the 1.1.0 release of libvirt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Similarly to qemu_driver.c, we can join often repeating code of looking
up network into one function: networkObjFromNetwork.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When using a <interface type="network"> that points to a network with
hostdev forwarding mode a hostdev alias is created for the network. This
allias is inserted into the hostdev list, but is backed with a part of
the network object that it is connected to.
When a VM is being stopped qemuProcessStop() calls
networkReleaseActualDevice() which eventually frees the memory for the
hostdev object. Afterwards when the domain definition is being freed by
virDomainDefFree() an invalid pointer is accessed by
virDomainHostdevDefFree() and may cause a crash of the daemon.
This patch removes the entry in the hostdev list before freeing the
depending memory to avoid this issue.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1000973
QEMU commit 3984890 introduced the "pci-hole64-size" property,
to i440FX-pcihost and q35-pcihost with a default setting of 2 GB.
Translate <pcihole64>x<pcihole64/> to:
-global q35-pcihost.pci-hole64-size=x for q35 machines and
-global i440FX-pcihost.pci-hole64-size=x for i440FX-based machines.
Error out on other machine types or if the size was specified
but the pcihost device lacks 'pci-hole64-size' property.
https://bugzilla.redhat.com/show_bug.cgi?id=990418
<controller type='pci' index='0' model='pci-root'>
<pcihole64 unit='KiB'>1048576</pcihole64>
</controller>
It can be used to adjust (or disable) the size of the 64-bit
PCI hole. The size attribute is in kilobytes (different unit
can be specified on input), but it gets rounded up to
the nearest GB by QEMU.
Disabling it will be needed for guests that crash with the
64-bit PCI hole (like Windows XP), see:
https://bugzilla.redhat.com/show_bug.cgi?id=990418
The ftp protocol is already recognized by qemu/KVM so add this support to
libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftp' name='/url/path'>
<host name='host.name' port='21'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
QEMU/KVM already allows a HTTP URL for the cdrom ISO image so add this support
to libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='http' name='/url/path'>
<host name='host.name' port='80'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
qemu-img is going to switch the default for QCOW2
to QCOW2v3 (compat=1.1)
Extend the probing for qemu-img command line options to check
if -o compat is supported. If the volume definition specifies
the qcow2 format but no compat level and -o compat is supported,
specify -o compat=0.10 to create a QCOW2v2 image.
https://bugzilla.redhat.com/show_bug.cgi?id=997977
If there's no hard_limit set and domain uses VFIO we still must lock
the guest memory (prerequisite from qemu). Hence, we should compute
the amount to be locked from max_balloon.
When cpu hotplug fails without reporting an error, we would fail the
command but update the count of vCPUs anyways.
Commit 761fc48136 fixed the case when CPU
hot-unplug failed silently, but forgot to fix up the value in this case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1000357
The virDomainOpenGraphics method accepts a UNIX socket FD from
the client app. It must set the label on this FD otherwise QEMU
will be prevented from receiving it with recvmsg.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If user requested multiqueue networking, beside multiple /dev/tap and
/dev/vhost-net openings, we forgot to pass mq=on onto the -device
virtio-net-pci command line. This is advised at:
http://www.linux-kvm.org/page/Multiqueue#Enable_MQ_feature
Re-arrange the code so that the returned bitmap is always initialized to
NULL even on early failures and return an error message as some callers
are already expecting it. Fix up the rest not to shadow the error.
Previously the error message showed the following:
error: internal error: Invalid or not yet handled value 'auto detect'
for VMX entry 'ide0:0.fileName'
This left the user unsure if it was a CD-ROM or a disk device that they
needed to fix. Now the error shows:
error: internal error: Invalid or not yet handled value 'auto detect'
for VMX entry 'ide0:0.fileName' for device type 'cdrom-raw'
Which should hopefully make it easier to see the issue with the VMX
configuration.
More fallout from commit d72ef888. When reconnecting to running
domains, the libxl_ctx in libxlDomainObjPrivate was used before
initializing it, causing a segfault in libxl and consequently
crashing libvirtd.
Initialize the libxlDomainObjPrivate libxl_ctx in libxlReconnectDomain,
and while at it use this ctx in libxlReconnectDomain instead of the
driver-wide ctx.
https://bugzilla.redhat.com/show_bug.cgi?id=822052
When doing a live migration, if the destination fails for any
reason after the point in which files should be labeled, then
the cleanup of the destination would restore the labels to their
defaults, even though the source is still trying to continue
running with the image open. Bug 822052 mentioned one source
of live migration failure - a mismatch in SELinux virt_use_nfs
settings (on for source, off for destination); but I found other
situations that would also trigger it (for example, having a
graphics device tied to port 5999 on the source, and a different
domain on the destination already using that port, so that the
destination cannot reuse the port).
In short, just as cleanup of the source on a successful migration
must not relabel files (because the destination would be crippled
by the relabel), cleanup of the destination on a failed migration
must not relabel files (because the source would be crippled).
* src/qemu/qemu_process.c (qemuProcessStart): Set flag to avoid
label restoration when cleaning up on failed migration.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduced by commit e0139e3044. virStorageVolDefFree free'ed the
pointers that are still used by the added volume object, this changes
it back to VIR_FREE.
Each of the modules handled reporting error messages from the secret fetching
slightly differently with respect to the error. Provide a similar message
for each error case and provide as much data as possible.
Following XML would fail :
<disk type='network' device='lun'>
<driver name='qemu' type='raw'/>
<source protocol='iscsi' name='iqn.2013-07.com.example:iscsi/1'>
<host name='example.com' port='3260'/>
</source>
<target dev='sda' bus='scsi'/>
</disk>
With the message:
error: Failed to start domain iscsilun
error: Unable to get device ID 'iqn.2013-07.com.example:iscsi/1': No such fi
Cause was commit id '1f49b05a' which added 'virDomainDiskSourceIsBlockType'
If we reached cleanup: prior to allocating cpus, it was possible that
'nr_nodes' had a value, but cpus was NULL leading to a possible NULL
deref. Add a 'cpus' as an end condition to for loop
https://bugzilla.redhat.com/show_bug.cgi?id=924153
Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with
an attribute relabel='no' in order to try and minimize the
impact of shutdown delays when an NFS server disappears. The idea
was that if a disk is on NFS and can't be labeled in the first
place, there is no need to attempt the (no-op) relabel on domain
shutdown. Unfortunately, the way this was implemented was by
modifying the domain XML so that the optimization would survive
libvirtd restart, but in a way that is indistinguishable from an
explicit user setting. Furthermore, once the setting is turned
on, libvirt avoids attempts at labeling, even for operations like
snapshot or blockcopy where the chain is being extended or pivoted
onto non-NFS, where SELinux labeling is once again possible. As
a result, it was impossible to do a blockcopy to pivot from an
NFS image file onto a local file.
The solution is to separate the semantics of a chain that must
not be labeled (which the user can set even on persistent domains)
vs. the optimization of not attempting a relabel on cleanup (a
live-only annotation), and using only the user's explicit notation
rather than the optimization as the decision on whether to skip
a label attempt in the first place. When upgrading an older
libvirtd to a newer, an NFS volume will still attempt the relabel;
but as the avoidance of a relabel was only an optimization, this
shouldn't cause any problems.
In the ideal future, libvirt will eventually have XML describing
EVERY file in the backing chain, with each file having a separate
<seclabel> element. At that point, libvirt will be able to track
more closely which files need a relabel attempt at shutdown. But
until we reach that point, the single <seclabel> for the entire
<disk> chain is treated as a hint - when a chain has only one
file, then we know it is accurate; but if the chain has more than
one file, we have to attempt relabel in spite of the attribute,
in case part of the chain is local and SELinux mattered for that
portion of the chain.
* src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new
member.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML):
Parse it, for live images only.
(virSecurityDeviceLabelDefFormat): Output it.
(virDomainDiskDefParseXML, virDomainChrSourceDefParseXML)
(virDomainDiskSourceDefFormat, virDomainChrDefFormat)
(virDomainDiskDefFormat): Pass flags on through.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip
when possible.
(virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not
norelabel, if labeling fails.
(virSecuritySELinuxSetFileconHelper): Fix indentation.
* docs/formatdomain.html.in (seclabel): Document new xml.
* docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml:
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml:
New test files.
* tests/qemuxml2argvtest.c (mymain): Run the new tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
If there's no hard_limit set and domain uses VFIO we still must lock the
guest memory (prerequisite from qemu). Hence, we should compute the
amount to be locked from max_balloon.
Since 16bcb3 we have a regression. The hard_limit is set
unconditionally. By default the limit is zero. Hence, if user hasn't
configured any, we set the zero in cgroup subsystem making the kernel
kill the corresponding qemu process immediately. The proper fix is to
set hard_limit iff user has configured any.
From: Dario Faggioli <dario.faggioli@citrix.com>
Starting from Xen 4.2, libxl has all the bits and pieces in place
for retrieving an adequate amount of information about the host
NUMA topology. It is therefore possible, after a bit of shuffling,
to arrange those information in the way libvirt wants to present
them to the outside world.
Therefore, with this patch, the <topology> section of the host
capabilities is properly populated, when running on Xen, so that
we can figure out whether or not we're running on a NUMA host,
and what its characteristics are.
[raistlin@Zhaman ~]$ sudo virsh --connect xen:/// capabilities
<capabilities>
<host>
<cpu>
....
<topology>
<cells num='2'>
<cell id='0'>
<memory unit='KiB'>6291456</memory>
<cpus num='8'>
<cpu id='0' socket_id='1' core_id='0' siblings='0-1'/>
<cpu id='1' socket_id='1' core_id='0' siblings='0-1'/>
<cpu id='2' socket_id='1' core_id='1' siblings='2-3'/>
<cpu id='3' socket_id='1' core_id='1' siblings='2-3'/>
<cpu id='4' socket_id='1' core_id='9' siblings='4-5'/>
<cpu id='5' socket_id='1' core_id='9' siblings='4-5'/>
<cpu id='6' socket_id='1' core_id='10' siblings='6-7'/>
<cpu id='7' socket_id='1' core_id='10' siblings='6-7'/>
</cpus>
</cell>
<cell id='1'>
<memory unit='KiB'>6881280</memory>
<cpus num='8'>
<cpu id='8' socket_id='0' core_id='0' siblings='8-9'/>
<cpu id='9' socket_id='0' core_id='0' siblings='8-9'/>
<cpu id='10' socket_id='0' core_id='1' siblings='10-11'/>
<cpu id='11' socket_id='0' core_id='1' siblings='10-11'/>
<cpu id='12' socket_id='0' core_id='9' siblings='12-13'/>
<cpu id='13' socket_id='0' core_id='9' siblings='12-13'/>
<cpu id='14' socket_id='0' core_id='10' siblings='14-15'/>
<cpu id='15' socket_id='0' core_id='10' siblings='14-15'/>
</cpus>
</cell>
</cells>
</topology>
</host>
....
When the daemon is compiled with firewalld support but the DBus message
bus isn't started in the system, the initialization of the nwfilter
driver fails even if there are fallback options.
On hosts that don't have the DBus service running or installed the new
systemd cgroups code failed with hard error instead of falling back to
"manual" cgroup creation.
Use the new helper to check for the system bus and use the fallback code
in case it isn't available.
Some systems may not use DBus in their system. Add a method to check if
the system bus is available that doesn't print error messages so that
code can later check for this condition and use an alternative approach.
Each new VM requires a new connection from libvirtd to virtlockd.
The default max clients limit in virtlockd of 20 is thus woefully
insufficient. virtlockd sockets are only accessible to matching
users, so there is no security need for such a tight limit. Make
it configurable and default to 1024.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This function is to guess the correct limit for maximal memory
usage by qemu for given domain. This can never be guessed
correctly, not to mention all the pains and sleepless nights this
code has caused. Once somebody discovers algorithm to solve the
Halting Problem, we can compute the limit algorithmically. But
till then, this code should never see the light of the release
again.
One has to refresh the pool to get the correct pool info after
adding/removing/resizing a volume, this updates the pool metadata
(allocation, available) after those operation are done.
The function that parses custom driver XML was getting pretty unruly,
split the object parsing into their own functions. Rename some variables
to be consistent across each function. This should be functionally
identical.
Currently the virConnectBaselineCPU API does not expose the CPU features
that are part of the CPU's model. This patch adds a new flag,
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES, that causes the API to explicitly
list all features that are part of that model.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Cleanup the libxl capabilities code to be a bit more extensible,
splitting out the creation of host and guest capabilities. This
should make it easier to implement additional capabilities in the
future, such as NUMA topology reporting.
The virBitmapParse function was calling virBitmapIsSet() function that
requires the caller to check the bounds of the bitmap without checking
them. This resulted into crashes when parsing a bitmap string that was
exceeding the bounds used as argument.
This patch refactors the function to use virBitmapSetBit without
checking if the bit is set (this function does the checks internally)
and then counts the bits in the bitmap afterwards (instead of keeping
track while parsing the string).
This patch also changes the "parse_error" label to a more common
"error".
The refactor should also get rid of the need to call sa_assert on the
returned variable as the callpath should allow coverity to infer the
possible return values.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997367
Thanks to Alex Jia for tracking down the issue. This issue is introduced
by commit 0fc8909.
There is a potential leak of a newly created libxlDomainObjPrivate
when subsequent allocation of the object's chrdev field fails.
Unref the object on such an error so that it is properly disposed.
This resolves the issue that prompted the filing of
https://bugzilla.redhat.com/show_bug.cgi?id=928638
(although the request there is for something much larger and more
general than this patch).
commit f3868259ca disabled the
forwarding to upstream DNS servers of unresolved DNS requests for
names that had no domain, but were just simple host names (no "."
character anywhere in the name). While this behavior is frowned upon
by DNS root servers (that's why it was changed in libvirt), it is
convenient in some cases, and since dnsmasq can be configured to allow
it, it must not be strictly forbidden.
This patch restores the old behavior, but since it is usually
undesirable, restoring it requires specification of a new option in
the network config. Adding the attribute "forwardPlainNames='yes'" to
the <dns> elemnt does the trick - when that attribute is added to a
network config, any simple hostnames that can't be resolved by the
network's dnsmasq instance will be forwarded to the DNS servers listed
in the host's /etc/resolv.conf for an attempt at resolution (just as
any FQDN would be forwarded).
When that attribute *isn't* specified, unresolved simple names will
*not* be forwarded to the upstream DNS server - this is the default
behavior.
If booting a container with a root FS that isn't the host's
root, we must ensure that the /dev mount point exists.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virtlockd/libvirtd daemons had listed '?' as the short option
for --help. getopt_long uses '?' for any unknown option. We want
to be able to distinguish unknown options (which use EXIT_FAILURE)
from correct usage of help (which should use EXIT_SUCCESS). Thus
we should use 'h' as a short option for --help. Also add this to
the man page docs
The virtlockd/libvirtd daemons did not list any short option
for the --version arg. Add -V as a valid short option, since
-v is already used for --verbose.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The lxcContainerMountFSBlockAuto method can be used to mount the
initial root filesystem, so it cannot assume a prefix of /.oldroot.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
- Convert virCgroupGet* to VIR_CGROUP_SUPPORTED
- Convert virCgroup(Get|Set)FreezerState to VIR_CGROUP_SUPPORTED
Signed-off-by: Eric Blake <eblake@redhat.com>
- Introduce VIR_CGROUP_SUPPORTED conditional
- Convert virCgroupKill* to use it
- Convert virCgroupIsolateMount() to use it
- Convert virCgroupRemoveRecursively to VIR_CGROUP_SUPPORTED
Signed-off-by: Eric Blake <eblake@redhat.com>
Make future patches smaller by matching a sane header listing in
the first place. No semantic change.
* src/util/vircgroup.h: Move free next to new, and controller
functions next to each other.
* src/util/vircgroup.c (virCgroupFree, virCgroupHasController)
(virCgroupPathOfController, virCgroupRemoveRecursively)
(virCgroupRemove): Sort implementation to be closer to header.
Signed-off-by: Eric Blake <eblake@redhat.com>
Avoid a forward declaration of a static function.
* src/util/vircgroup.c (virCgroupPartitionNeedsEscaping)
(virCgroupParticionEscape): Move up.
Signed-off-by: Eric Blake <eblake@redhat.com>
Format all functions with two blank lines between, and return type
on separate line from function name. Also break some lines longer
than 80 columns. This makes the subsequent macro refactoring
less noisy.
* src/util/vircgroup.c: Match prevailing style.
Signed-off-by: Eric Blake <eblake@redhat.com>
otherwise having a strict --no-copy-dt-needed-entries fails in several
places like:
CCLD virdbustest
/usr/bin/ld: virdbustest-virdbustest.o: undefined reference to symbol 'dbus_message_unref'
/lib/x86_64-linux-gnu/libdbus-1.so.3: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
https://bugzilla.redhat.com/show_bug.cgi?id=951637
Newer gnutls uses nettle, rather than gcrypt, which is a lot nicer
regarding initialization. Yet we were unconditionally initializing
gcrypt even when gnutls wouldn't be using it, and having two crypto
libraries linked into libvirt.so is pointless, but mostly harmless
(it doesn't crash, but does interfere with certification efforts).
There are three distinct version ranges to worry about when
determining which crypto lib gnutls uses, per these gnutls mails:
2.12: http://lists.gnu.org/archive/html/gnutls-devel/2011-03/msg00034.html
3.0: http://lists.gnu.org/archive/html/gnutls-devel/2011-07/msg00035.html
If pkg-config can prove version numbers and/or list the crypto
library used for static linking, we have our proof; if not, it
is safer (even if pointless) to continue to use gcrypt ourselves.
* configure.ac (WITH_GNUTLS): Probe whether to add -lgcrypt, and
define a witness WITH_GNUTLS_GCRYPT.
* src/libvirt.c (virTLSMutexInit, virTLSMutexDestroy)
(virTLSMutexLock, virTLSMutexUnlock, virTLSThreadImpl)
(virGlobalInit): Honor the witness.
* libvirt.spec.in (BuildRequires): Make gcrypt usage conditional,
no longer needed in Fedora 19.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit d72ef888 introduced a bug in the libxl driver that will
segfault libvirtd if libxl reports an error message, e.g. when
attempting to initialize the driver on a non-Xen system. I
assumed it was valid to pass a NULL logger to libxl_ctx_alloc(),
but that is not the case since any errors associated with the ctx
that are emitted by libxl will dereference the logger and crash
libvirtd.
Errors associated with the libxl driver-wide ctx could be useful
for debugging anyway, so create a 'libxl-driver.log' to capture
these errors.
Recentish (2011) kernels introduced a new device called /dev/loop-control,
which causes libvirt's detection of loop devices to get confused
since it only checks for a prefix of 'loop'. Also check that the
next character is a digit
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This adds two new pages to the website, acl.html describing
the general access control framework and permissions models,
and aclpolkit.html describing the use of polkit as an
access control driver.
page.xsl is modified to support a new syntax
<div id="include" filename="somefile.htmlinc"/>
which will cause the XSL transform to replace that <div>
with the contents of 'somefile.htmlinc'. We use this in
the acl.html.in file, to pull the table of permissions
for each libvirt object. This table is autogenerated
from the enums in src/access/viraccessperms.h by the
genaclperms.pl script.
newapi.xsl is modified so that the list of permissions
checks shown against each API will link to the description
of the permissions in acl.html
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The gendispatch.pl script puts comments at the top of files
it creates, saying that it auto-generated them. Also include
the name of the source data file which it reads when doing
the auto-generation.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
introduced by cs 4b9eec50fe ("libxl: implement per
NUMA node free memory reporting"). What was wrong was that
libxl_get_numainfo() put in nr_nodes the actual number of
host NUMA nodes, not the highest node ID (like libnuma's
numa_max_node() does instead).
While at it, turn the failure of libxl_get_numainfo() from
a simple warning to a proper error, as requested during the
review of another patch of the original series.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
This is a second attempt at fixing the problem first attempted
in commit 2df8d99; basically undoing the fact that it was
reverted in commit 43cee32f, plus fixing two more issues: the
code in configure.ac has to EXACTLY match virnetdevbridge.c
with regards to declaring in6 types before using if_bridge.h,
and the fact that RHEL 5 has even more conflicts:
In file included from util/virnetdevbridge.c:49:
/usr/include/linux/in6.h:47: error: conflicting types for 'in6addr_any'
/usr/include/netinet/in.h:206: error: previous declaration of 'in6addr_any' was here
/usr/include/linux/in6.h:49: error: conflicting types for 'in6addr_loopback'
/usr/include/netinet/in.h:207: error: previous declaration of 'in6addr_loopback' was here
The rest of this commit message borrows from the original try
of 2df8d99:
A fresh checkout on a RHEL 6 machine with these packages:
kernel-headers-2.6.32-405.el6.x86_64
glibc-2.12-1.128.el6.x86_64
failed to configure with this message:
checking for linux/if_bridge.h... no
configure: error: You must install kernel-headers in order to compile libvirt with QEMU or LXC support
Digging in config.log, we see that the problem is identical to
what we fixed earlier in commit d12c2811:
configure:98831: checking for linux/if_bridge.h
configure:98853: gcc -std=gnu99 -c -g -O2 conftest.c >&5
In file included from /usr/include/linux/if_bridge.h:17,
from conftest.c:559:
/usr/include/linux/in6.h:31: error: redefinition of 'struct in6_addr'
/usr/include/linux/in6.h:48: error: redefinition of 'struct sockaddr_in6'
/usr/include/linux/in6.h:56: error: redefinition of 'struct ipv6_mreq'
configure:98860: $? = 1
I had not hit it earlier because I was using incremental builds,
where config.cache had shielded me from the kernel-headers breakage.
* configure.ac (if_bridge.h): Avoid conflicting type definitions.
* src/util/virnetdevbridge.c (includes): Also sanitize for RHEL 5.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, only one log file is created by the libxl driver, with
all output from libxl for all domains going to this one file.
Create a per-domain log file based on domain name, making sifting
through the logs a bit easier. This required deferring libxl_ctx
allocation until starting the domain, which is fine since the
ctx is not used when the domain is inactive.
Tested-by: Dario Faggioli <dario.faggioli@citrix.com>
The virtlockd daemon supports an /etc/libvirt/virtlockd.conf
config file, but we never installed a default config, nor
created any augeas scripts. This change addresses that omission.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Coverity complained about the usage of the uninitialized cacerts in the
event(s) that "access(certFile, R_OK)" and/or "access(cacertFile, R_OK)"
fail the for loop used to fill in the certs will have indeterminate data
as well as the possibility that both failures would result in the
gnutls_x509_crt_deinit() call having a similar fate.
Initializing cacerts only would resolve the issue; however, it still
would leave the indeterminate action, so rather add a parameter to
the virNetTLSContextLoadCACertListFromFile() to pass the max size rather
then overloading the returned count parameter. If the the call is never
made, then we won't go through the for loops referencing the empty
cacerts
Valgrind defects memory error:
==16759== 1 errors in context 1 of 8:
==16759== Invalid free() / delete / delete[] / realloc()
==16759== at 0x4A074C4: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16759== by 0x83CD329: xdr_string (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D93E4D: xdr_remote_nonnull_string (remote_protocol.c:31)
==16759== by 0x4D94350: xdr_remote_nonnull_domain (remote_protocol.c:58)
==16759== by 0x4D976C8: xdr_remote_domain_create_with_flags_ret (remote_protocol.c:1762)
==16759== by 0x83CC734: xdr_free (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D7F1E0: remoteDomainCreateWithFlags (remote_driver.c:2441)
==16759== by 0x4D4BF17: virDomainCreateWithFlags (libvirt.c:9499)
==16759== by 0x13127A: cmdStart (virsh-domain.c:3376)
==16759== by 0x12BF83: vshCommandRun (virsh.c:1751)
==16759== by 0x126FFB: main (virsh.c:3205)
==16759== Address 0xe1394a0 is not stack'd, malloc'd or (recently) free'd
==16759== 1 errors in context 2 of 8:
==16759== Conditional jump or move depends on uninitialised value(s)
==16759== at 0x4A07477: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16759== by 0x83CD329: xdr_string (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D93E4D: xdr_remote_nonnull_string (remote_protocol.c:31)
==16759== by 0x4D94350: xdr_remote_nonnull_domain (remote_protocol.c:58)
==16759== by 0x4D976C8: xdr_remote_domain_create_with_flags_ret (remote_protocol.c:1762)
==16759== by 0x83CC734: xdr_free (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D7F1E0: remoteDomainCreateWithFlags (remote_driver.c:2441)
==16759== by 0x4D4BF17: virDomainCreateWithFlags (libvirt.c:9499)
==16759== by 0x13127A: cmdStart (virsh-domain.c:3376)
==16759== by 0x12BF83: vshCommandRun (virsh.c:1751)
==16759== by 0x126FFB: main (virsh.c:3205)
==16759== Uninitialised value was created by a stack allocation
==16759== at 0x4D7F120: remoteDomainCreateWithFlags (remote_driver.c:2423)
How to reproduce?
# virsh start <domain> --paused
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=994855
Signed-off-by: Alex Jia <ajia@redhat.com>
If securityfs is available on the host, we should ensure to
mount it read-only in the container. This will avoid systemd
trying to mount it during startup causing SELinux AVCs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Hotplugging a single SCSI device works, but adding additional ones
result in an error from QEMU:
[root@gpok197 ~]# virsh attach-device guest01 blah.xml
Device attached successfully
[root@gpok197 ~]# virsh attach-device guest01 blah2.xml
error: Failed to attach device from blah2.xml
error: internal error unable to execute QEMU command 'device_add': Duplicate ID 'hostdev0' for device
The hostdev ID that is created is always set to zero, regardless
of the contents of the XML. Changing the index in the hotplug case
to a negative one so the next available index is used.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
So that app developers / admins know what access control checks
are performed for each API, this patch extends the API docs
generator to include details of the ACLs for each.
The gendispatch.pl script is extended so that it generates
a simple XML describing ACL rules, eg.
<aclinfo>
...
<api name='virConnectNumOfDomains'>
<check object='connect' perm='search_domains'/>
<filter object='domain' perm='getattr'/>
</api>
<api name='virDomainAttachDeviceFlags'>
<check object='domain' perm='write'/>
<check object='domain' perm='save' flags='!VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE'/>
<check object='domain' perm='save' flags='VIR_DOMAIN_AFFECT_CONFIG'/>
</api>
...
</aclinfo>
The newapi.xsl template loads the XML files containing the ACL
rules and generates a short block of HTML for each API describing
the parameter checks and return value filters (if any).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code added to validate CA certificates did not take into
account the possibility that the cacert.pem file can contain
multiple (concatenated) cert data blocks. Extend the code for
loading CA certs to use the gnutls APIs for loading cert lists.
Add test cases to check that multi-level trees of certs will
validate correctly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 3d0e3c1 reintroduced a problem previously squelched in
commit 7e5aa78. Add a syntax check this time around.
util/virutil.c: In function 'virGetGroupList':
util/virutil.c:1015: error: 'for' loop initial declaration used outside C99 mode
* cfg.mk (sc_prohibit_loop_var_decl): New rule.
* src/util/virutil.c (virGetGroupList): Fix offender.
Signed-off-by: Eric Blake <eblake@redhat.com>
Before, missing attributes were only OK when adding entries;
modification and deletion required all of them.
Now, only deletion works with missing attributes, as long as
the host is uniquely identified.
Go through disks of guest, if one disk doesn't exist or its backing
chain is broken, with 'optional' startupPolicy, for CDROM and Floppy
we only discard its source path definition in xml, for disks we drop
it from disk list and free it.
Since iptables version 1.4.16 '-m state --state NEW' is converted to
'-m conntrack --ctstate NEW'. Therefore, when encountering this or later
versions of iptables use '-m conntrack --ctstate'.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The change from initgroups to virGetGroupList/setgroups in
cab36cfe71ba83b71e536ba5c98e596f02b697b0 dropped the primary group from
processes group list iff the passed in group to virGetGroupList differs
from the user's primary group.
So always include the primary group to bring back the old behaviour.
Debian has the kvm group as primary group but uses
libvirt-qemu:libvirt-qemu as user:group to run the kvm process so
without this change the /dev/kvm is inaccessible.
Since commit 95e18efd most public interfaces (xenUnified...) obtain
a virDomainDefPtr via xenGetDomainDefFor...() which take the unified
lock.
This is already taken before calling xenDomainUsedCpus(), so we get
a deadlock for active guests. Avoid this by splitting up
xenUnifiedDomainGetVcpusFlags() and xenUnifiedDomainGetVcpus() into
public and private function calls (which get the virDomainDefPtr passed)
and use those in xenDomainUsedCpus().
xenDomainUsedCpus
...
nb_vcpu = xenUnifiedDomainGetMaxVcpus(dom);
return xenUnifiedDomainGetVcpusFlags(...)
...
if (!(def = xenGetDomainDefForDom(dom)))
return xenGetDomainDefForUUID(dom->conn, dom->uuid);
...
ret = xenHypervisorLookupDomainByUUID(conn, uuid);
...
xenUnifiedLock(priv);
name = xenStoreDomainGetName(conn, id);
xenUnifiedUnlock(priv);
...
if ((ncpus = xenUnifiedDomainGetVcpus(dom, cpuinfo, nb_vcpu,
...
if (!(def = xenGetDomainDefForDom(dom)))
[again like above]
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This patch addresses two concerns with the error reporting when an
incompatible PCI address is specified for a device:
1) It wasn't always apparent which device had the problem. With this
patch applied, any error about an incompatible address will always
contain the full address as given in the config, so it will be easier
to determine which device's config aused the problem.
2) In some cases when the problem came from bad config, the error
message was erroneously classified as VIR_ERR_INTERNAL_ERROR. With
this patch applied, the same error message will be changed to indicate
either "internal" or "xml" error depending on whether the address came
from the config, or was automatically generated by libvirt.
Note that in the case of "internal" (due to bad auto-generation)
errors, the PCI address won't be of much use in finding the location
in config to change (because it was automatically generated). Of
course that makes perfect sense, but still the address could provide a
clue about a bug in libvirt attempting to use a type of pci bus that
doesn't have its flags set correctly (or something similar). In other
words, it's not perfect, but it is definitely better.
q35 machines have an implicit ahci (sata) controller at 00:1F.2 which
has no "id" associated with it. For this reason, we can't refer to it
as "ahci0". Instead, we don't give an id on the commandline, which
qemu interprets as "use the first ahci controller". We then need to
specify the unit with "unit=%d" rather than adding it onto the bus
arg.
https://bugzilla.redhat.com/show_bug.cgi?id=979477
Since 1.0.3 we are using the new way to copy non shared storage during
migration (the NBD way). However, whether the new or old way is used is
not controllable by user but unconditionally turned on if both sides of
migration support it. Moreover, the implementation is not complete: the
combination for VIR_MIGRATE_TUNNELLED flag is missing (as we need to
open new port on the destination) in which case we just error out. This
is a deadly combination: not letting users choose their destiny and
erroring out. We should not do that but VIR_WARN and turn the NBD off
instead.
We had been setting the device alias in the devinceinfo for pci
controllers to "pci%u", but then hardcoding "pci.%u" when creating the
device address for other devices using that pci bus. This all worked
just fine until we encountered the built-in "pcie.0" bus (the PCIe
root complex) in Q35 machines.
In order to create the correct commandline for this one case, this
patch:
1) sets the alias for PCI controllers correctly, to "pci.%u" (or
"pcie.%u" for the pcie-root controller)
2) eliminates the hardcoded "pci.%u" for pci controllers when
generatuing device address strings, and instead uses the controller's
alias.
3) plumbs a pointer to the virDomainDef all the way down to
qemuBuildDeviceAddressStr. This was necessary in order to make the
aliase of the controller *used by a device* available (previously
qemuBuildDeviceAddressStr only had the deviceinfo of the device
itself, *not* of the controller it was connecting to). This made for a
larger than desired diff, but at least in the future we won't have to
do it again, since all the information we could possibly ever need for
future enhancements is in the virDomainDef. (right?)
This should be done for *all* controllers, but for now we just do it
in the case of PCI controllers, to reduce the likelyhood of
regression.
This patch adds in special handling for a few devices that need to be
treated differently for q35 domains:
usb - there is no implicit/default usb controller for the q35
machinetype. This is done because normally the default usb controller
is added to a domain by just adding "-usb" to the qemu commandline,
and it's assumed that this will add a single piix3 usb1 controller at
slot 1 function 2. That's not what happens when the machinetype is
q35, though. Instead, adding -usb to the commandline adds 3 usb
(version 2) controllers to the domain at slot 0x1D.{1,2,7}. Rather
than having
<controller type='usb' index='0'/>
translate into 3 separate devices on the PCI bus, it's cleaner to not
automatically add a default usb device; one can always be added
explicitly if desired. Or we may decide that on q35 machines, 3 usb
controllers will be automatically added when none is given. But for
this initial commit, at least we aren't locking ourselves into
something we later won't want.
video - qemu always initializes the primary video device immediately
after any integrated devices for the machinetype. Unless instructed
otherwise (by using "-device vga..." instead of "-vga" which libvirt
uses in many cases to work around deficiencies and bugs in various
qemu versions) qemu will always pick the first unused slot. In the
case of the "pc" machinetype and its derivatives, this is always slot
2, but on q35 machinetypes, the first free slot is slot 1 (since the
q35's integrated peripheral devices are placed in other slots,
e.g. slot 0x1f). In order to make the PCI address of the video device
predictable, that slot (1 or 2, depending on machinetype) is reserved
even when no video device has been specified.
sata - a q35 machine always has a sata controller implicitly added at
slot 0x1F, function 2. There is no way to avoid this controller, so we
always add it. Note that the xml2xml tests for the pcie-root and q35
cases were changed to use DO_TEST_DIFFERENT() so that we can check for
the sata controller being automatically added. This is especially
important because we can't check for it in the xml2argv output (it has
no effect on that output since it's an implicit device).
ide - q35 has no ide controllers.
isa and smbus controllers - these two are always present in a q35 (at
slot 0x1F functions 0 and 3) but we have no way of modelling them in
our config. We do need to reserve those functions so that the user
doesn't attempt to put anything else there though. (note that the "pc"
machine type also has an ISA controller, which we also ignore).
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.
Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.
Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.
This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.
Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
Previous refactoring of the guest PCI address reservation/allocation
code allowed for slot types other than basic PCI (e.g. PCI express,
non-hotpluggable slots, etc) but would not auto-allocate a slot for a
device that required any type other than a basic hot-pluggable
PCI slot.
This patch refactors the code to be aware of different slot types
during auto-allocation of addresses as well - as long as there is an
empty slot of the required type, it will be found and used.
The piece that *wasn't* added is that we don't auto-create a new PCI
bus when needed for anything except basic PCI devices. This is because
there are multiple different types of controllers that can provide,
for example, a PCI express slot (in addition to the pcie-root
controller, these can also be found on a "root-port" or on a
"downstream-switch-port"). Since we currently don't support any PCIe
devices (except pending support for dmi-to-pci-bridge), we can defer
any decision on what to do about this.
Commit 632180d1 introduced memory corruption in xenDaemonListDefinedDomains
by starting to populate the names array at index -1, causing all sorts
of havoc in libvirtd such as aborts like the following
*** Error in `/usr/sbin/libvirtd': double free or corruption (out): 0x00007fffe00ccf20 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x7abf6)[0x7ffff3fa0bf6]
/lib64/libc.so.6(+0x7b973)[0x7ffff3fa1973]
/lib64/libc.so.6(xdr_array+0xde)[0x7ffff403cbae]
/usr/sbin/libvirtd(+0x50251)[0x5555555a4251]
/lib64/libc.so.6(xdr_free+0x15)[0x7ffff403ccd5]
/usr/lib64/libvirt.so.0(+0x1fad34)[0x7ffff76b1d34]
/usr/lib64/libvirt.so.0(virNetServerProgramDispatch+0x1fc)[0x7ffff76b16f1]
/usr/lib64/libvirt.so.0(+0x1f214a)[0x7ffff76a914a]
/usr/lib64/libvirt.so.0(+0x1f222d)[0x7ffff76a922d]
/usr/lib64/libvirt.so.0(+0xbcc4f)[0x7ffff7573c4f]
/usr/lib64/libvirt.so.0(+0xbc5e5)[0x7ffff75735e5]
/lib64/libpthread.so.0(+0x7e0f)[0x7ffff48f7e0f]
/lib64/libc.so.6(clone+0x6d)[0x7ffff400e7dd]
Fix by initializing ret to 0 and only setting to error on failure path.
This configuration knob lets user to set the length of queue of
connection requests waiting to be accept()-ed by the daemon. IOW, it
just controls the @backlog passed to listen:
int listen(int sockfd, int backlog);
Currently, even if max_client limit is hit, we accept() incoming
connection request, but close it immediately. This has disadvantage of
not using listen() queue. We should accept() only those clients we
know we can serve and let all other wait in the (limited) queue.
* The functions qemuDomainPCIAddressReserveAddr and
qemuDomainPCIAddressReserveSlot were very similar (and should have
been more similar) and were about to get more code added to them which
would create even more duplicated code, so this patch gives
qemuDomainPCIAddressReserveAddr a "reserveEntireSlot" arg, then
replaces the body of qemuDomainPCIAddressReserveSlot with a call to
qemuDomainPCIAddressReserveAddr.
You will notice that addrs->lastaddr was previously set in
qemuDomainPCIAddressReserveAddr (but *not* set in
qemuDomainPCIAddressReserveSlot). For consistency and cleanliness of
code, that bit was removed and put into the one caller of
qemuDomainPCIAddressReserveAddr (there is a similar place where the
caller of qemuDomainPCIAddressReserveSlot sets lastaddr). This does
guarantee identical functionality to pre-patch code, but in practice
isn't really critical, because lastaddr is just keeping track of where
to start when looking for a free slot - if it isn't updated, we will
just start looking on a slot that's already occupied, then skip up to
one that isn't.
* qemuCollectPCIAddress was essentially doing the same thing as
qemuDomainPCIAddressReserveAddr, but with some extra special case
checking at the beginning. The duplicate code has been replaced with
a call to qemuDomainPCIAddressReserveAddr. This required adding a
"fromConfig" boolean, which is only used to change the log error
code from VIR_ERR_INTERNAL_ERROR (when the address was
auto-generated by libvirt) to VIR_ERR_XML_ERROR (when the address is
coming from the config); without this differentiation, it would be
difficult to tell if an error was caused by something wrong in
libvirt's auto-allocate code or just bad config.
* the bit of code in qemuDomainPCIAddressValidate that checks the
connect type flags is going to be used in a couple more places where
we don't need to also check the slot limits (because we're generating
the slot number ourselves), so that has been pulled out into a
separate qemuDomainPCIAddressFlagsCompatible function.
* qemuDomainPCIAddressSetNextAddr
The name of this function was confusing because 1) other functions in
the file that end in "Addr" are only operating on a single function of
one PCI slot, not the entire slot, while functions that do something
with the entire slot end in "Slot", and 2) it didn't contain a verb
describing what it is doing (the "Set" refers to the set that contains
all PCI buses in the system, used to keep track of which slots in
which buses are already reserved for use).
It is now renamed to qemuDomainPCIAddressReserveNextSlot, which more
clearly describes what it is doing. Arguably, it could have been
changed to qemuDomainPCIAddressSetReserveNextSlot, but 1) the word
"set" is confusing in this context because it could be intended as a
verb or as a noun, and 2) most other functions that operate on a
single slot or address within this set are also named
qemuDomainPCIAddress... rather than qemuDomainPCIAddressSet... Only
the Create, Free, and Grow functions for an address set (which modify the
entire set, not just one element) use "Set" in their name.
* qemuPCIAddressAsString, qemuPCIAddressValidate
All the other functions in this set are named
qemuDomainPCIAddressxxxxx, so I renamed these to be consistent.
The parser shouldn't be doing arch-specific things like adding in
implicit controllers to the config. This should instead be done in the
hypervisor's post-parse callback.
This patch removes the auto-add of a usb controller from the domain
parser, and puts it into the qemu driver's post-parse callback (just
as is already done with the auto-add of the pci-root controller). In
the future, any machine/arch that shouldn't have a default usb
controller added should just set addDefaultUSB = false in this
function.
We've recently seen that q35 and ARMV7L domains shouldn't get a default USB
controller, so I've set addDefaultUSB to false for both of those.
If upgrading from a libvirt that is older than 1.0.5, we can
not assume that vm->def->resource is non-NULL. This bogus
assumption caused libvirtd to crash
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The journald code would crash if a NULL was passed for the
filename / funcname in the logging code. This shouldn't
happen in general, but it is better to be safe, since there
have been bugs triggering this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virLibConnError macros in libvirt-lxc.c and
libvirt-qemu.c were passing NULL for the filename.
This causes a crash if the logging code is configured
to use journald.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* Move platform specific things (e.g. firewalling and route
collision checks) into bridge_driver_platform
* Create two platform specific implementations:
- bridge_driver_linux: Linux implementation using iptables,
it's actually the code moved from bridge_driver.c
- bridge_driver_nop: dumb implementation that does nothing
Signed-off-by: Eric Blake <eblake@redhat.com>
*src/util/virstoragefile.c: Add a helper function to get
the first name of missing backing files, if the name is NULL,
it means the diskchain is not broken.
*src/qemu/qemu_domain.c: qemuDiskChainCheckBroken(disk) to
check if its chain is broken
Refactor this function to make it focus on disk presence checking,
including diskchain checking, and not only for CDROM and Floppy.
This change is good for the following patches.
The virDomainDef is allocated by the caller and also used after
calling to xenDaemonCreateXML. So it must not get freed by the
callee.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Make the virCgroupNewMachine method try to use systemd-machined
first. If that fails, then fallback to using the traditional
cgroup setup code path.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When systemd is involved in managing processes, it may start
killing off & tearing down croups associated with the process
while we're still doing virCgroupKillPainfully. We must
explicitly check for ENOENT and treat it as if we had finished
killing processes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Systemd uses a named cgroup mount for tracking processes. Add
it as another type of controller, albeit one which we have to
special case in a number of places. In particular we must
never create/delete directories there, nor add tasks. Essentially
the systemd mount is to be considered read-only for libvirt.
With this change both the virCgroupDetectPlacement and
virCgroupCopyPlacement methods must be invoked. The copy
placement method will copy setup for resource controllers
only. The detect placement method will probe for any
named controllers, or resource controllers not already
setup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are some interesting escaping rules to consider when dealing
with systemd slice/scope names. Thus it is helpful to have APIs
for formatting names
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Although this isn't apparently needed for the guest agent itself, the
test I will be adding later depends on the newline as a separator of
messages to process.
this patch introduce the console api in libxl driver for both pv and
hvm guest. and import and update the libxlMakeChrdevStr function
which was deleted in commit dfa1e1dd.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
This function is needed for virt-login-shell. Also modify virGirUserDirectory
to use the new function, to simplify the code.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_DOMAIN_PAUSED_GUEST_PANICKED constant is badly named,
leaking the QEMU event name. Elsewhere in the API we use
'CRASHED' rather than 'PANICKED', and the addition of 'GUEST'
is redundant since all events are guest related.
Thus rename it to VIR_DOMAIN_PAUSED_CRASHED, which matches
with VIR_DOMAIN_RUNNING_CRASHED and VIR_DOMAIN_EVENT_CRASHED.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to rename before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_SHUTDOWN_CRASHED state constant does not appear
to be used in the QEMU code anyway. It also doesn't make much
(any) sense, since the 'shutdown' state is a transient state
between 'running' and 'shutoff' and when a guest crashes, it
does not end up in a 'shutdown' state, only 'shutoff'.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to remove before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The way we were casting small (<32bit) integers was broken
on big endian hosts, causing stack smashing. This was detected
in the test suite either by test failures due to incorrect
results, or by libc/gcc abort'ing with its stack canary
triggered.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Depending on the set of mingw packages installed, it is possible
that other .c files hit the mingw header pollution from the
virdbus.h file.
In file included from ../../src/rpc/virnetserver.c:39:0:
../../src/util/virdbus.h:41:35: error: expected ';', ',' or ')' before 'struct'
const char *interface,
^
* src/util/virdbus.h (virDBusCallMethod): Match .c file change.
Signed-off-by: Eric Blake <eblake@redhat.com>
On platforms without decent group support, the build failed:
Cannot export virGetGroupList: symbol not defined
./.libs/libvirt_security_manager.a(libvirt_security_manager_la-security_dac.o): In function `virSecurityDACPreFork':
/home/eblake/libvirt-tmp/build/src/../../src/security/security_dac.c:248: undefined reference to `virGetGroupList'
collect2: error: ld returned 1 exit status
* src/util/virutil.c (virGetGroupList): Provide dummy implementation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Our recent conversion to make VIR_ALLOC report oom wasn't
tested on mingw:
In file included from ../../src/util/virthread.c:29:0:
../../src/util/virthreadwin32.c: In function 'virCondWait':
../../src/util/virthreadwin32.c:166:81: error: 'VIR_FROM_THIS' undeclared (first use in this function)
if (VIR_REALLOC_N(c->waiters, c->nwaiters + 1) < 0) {
^
* src/util/virthreadwin32.c (VIR_FROM_THIS): Define.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous patch was incomplete.
CC libvirt_util_la-vircgroup.lo
../../src/util/vircgroup.c:70:12: error: 'virCgroupPartitionEscape' declared 'static' but never defined [-Werror=unused-function]
static int virCgroupPartitionEscape(char **path);
^
* src/util/vircgroup.c (virCgroupPartitionEscape): Move forward
declaration inside conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virCgroupValidateMachineGroup method calls some functions
which are only conditionally compiled, thus it too must be
made conditional. This fixes the build on non-Linux hosts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A VPATH build 'make check' was failing with:
GEN check-driverimpls
Can't open ../../src/../../src/lxc/lxc_monitor_protocol.h: No such file or directory at ../../src/check-driverimpls.pl line 29, <> line 27153.
Can't open ../../src/../../src/lxc/lxc_monitor_protocol.c: No such file or directory at ../../src/check-driverimpls.pl line 29, <> line 27153.
...
GEN check-aclrules
cannot read ../../src/../../src/remote/remote_protocol.x at ../../src/check-aclrules.pl line 128.
because $(srcdir) was being prepended to file names that already
included it.
* src/Makefile.am (check-driverimpls): Don't add srcdir twice.
Signed-off-by: Eric Blake <eblake@redhat.com>
When the legacy Xen driver probes with a NULL URI, and
finds itself running on Xen, it will set conn->uri. A
little bit later though it checks to see if libxl support
exists, and if so declines the driver. This leaves the
conn->uri set to 'xen:///', so if libxl also declines
it, it prevents probing of the QEMU driver.
Once a driver has set the conn->uri, it must *never*
decline an open request. So we must move the libxl
check earlier
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=981094
The commit 0ad9025ef introduce qemu flag QEMU_CAPS_DEVICE_VIDEO_PRIMARY
for using -device VGA, -device cirrus-vga, -device vmware-svga and
-device qxl-vga. In use, for -device qxl-vga, mouse doesn't display
in guest window like the desciption in above bug.
This patch try to use -device for primary video when qemu >=1.6 which
contains the bug fix patch
Otherwise, with new enough gcc compiling at -O2, the build fails with:
../../src/conf/domain_conf.c: In function ‘virDomainDeviceDefPostParse’:
../../src/conf/domain_conf.c:2821:29: error: ‘cnt’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
for (i = 0; i < *cnt; i++) {
^
../../src/conf/domain_conf.c:2795:20: note: ‘cnt’ was declared here
size_t i, *cnt;
^
../../src/conf/domain_conf.c:2794:30: error: ‘arrPtr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
virDomainChrDefPtr **arrPtr;
^
* src/conf/domain_conf.c (virDomainChrGetDomainPtrs): Always
assign into output parameters.
Signed-off-by: Eric Blake <eblake@redhat.com>
By setting the default partition in libvirt_lxc it is not
visible when querying the live XML. Move setting of the
default partition into libvirtd virLXCProcessStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Decrementing it when it was already 0 causes an invalid free
in virNetworkDefUpdateDNSHost if virNetworkDNSHostDefParseXML
fails and virNetworkDNSHostDefClear gets called twice.
virNetworkForwardDefClear left the number untouched even if it
freed all the elements.
If the app has provided a whitelist of controllers to be used,
we skip detecting its mount point. We still, however, fill in
the placement info which later confuses the machine name
validation code. Skip detecting placement if the controller
mount point is not set
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a VM has an 'emulator' child cgroup present, we must
strip off that suffix when detecting the cgroup for a
machine
Rename the virCgroupIsValidMachineGroup method to
virCgroupValidateMachineGroup to make a bit clearer
that this isn't simply a boolean check, it will make
changes to the object.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupIsValidMachine does not need to be called from
outside the cgroups file now, so make it static.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of requiring drivers to use a combination of calls
to virCgroupNewDetect and virCgroupIsValidMachine, combine
the two into virCgroupNewDetectMachine
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Both virStoragePoolFree and virStorageVolFree reset the last error,
which might lead to the cryptic message:
An error occurred, but the cause is unknown
When the volume wasn't found, virStorageVolFree was called with NULL,
leading to an error:
invalid storage volume pointer in virStorageVolFree
This patch changes it to:
Storage volume not found: no storage vol with matching name 'tomato'
Add protection such that the virCgroupRemove and
virCgroupKill* do not do anything to the root cgroup.
Killing all PIDs in the root cgroup does not end well.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of requiring one API call to create a cgroup and
another to add a task to it, introduce a new API
virCgroupNewMachine which does both jobs at once. This
will facilitate the later code to talk to systemd to
achieve this job which is also atomic.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There's a race in lxc driver causing a deadlock. If a domain is
destroyed immediately after started, the deadlock can occur. When domain
is started, the even loop tries to connect to the monitor. If the
connecting succeeds, virLXCProcessMonitorInitNotify() is called with
@mon->client locked. The first thing that callee does, is
virObjectLock(vm). So the order of locking is: 1) @mon->client, 2) @vm.
However, if there's another thread executing virDomainDestroy on the
very same domain, the first thing done here is locking the @vm. Then,
the corresponding libvirt_lxc process is killed and monitor is closed
via calling virLXCMonitorClose(). This callee tries to lock @mon->client
too. So the order is reversed to the first case. This situation results
in deadlock and unresponsive libvirtd (since the eventloop is involved).
The proper solution is to unlock the @vm in virLXCMonitorClose prior
entering virNetClientClose(). See the backtrace as follows:
Thread 25 (Thread 0x7f1b7c9b8700 (LWP 16312)):
0 0x00007f1b80539714 in __lll_lock_wait () from /lib64/libpthread.so.0
1 0x00007f1b8053516c in _L_lock_516 () from /lib64/libpthread.so.0
2 0x00007f1b80534fbb in pthread_mutex_lock () from /lib64/libpthread.so.0
3 0x00007f1b82a637cf in virMutexLock (m=0x7f1b3c0038d0) at util/virthreadpthread.c:85
4 0x00007f1b82a4ccf2 in virObjectLock (anyobj=0x7f1b3c0038c0) at util/virobject.c:320
5 0x00007f1b82b861f6 in virNetClientCloseInternal (client=0x7f1b3c0038c0, reason=3) at rpc/virnetclient.c:696
6 0x00007f1b82b862f5 in virNetClientClose (client=0x7f1b3c0038c0) at rpc/virnetclient.c:721
7 0x00007f1b6ee12500 in virLXCMonitorClose (mon=0x7f1b3c007210) at lxc/lxc_monitor.c:216
8 0x00007f1b6ee129f0 in virLXCProcessCleanup (driver=0x7f1b68100240, vm=0x7f1b680ceb70, reason=VIR_DOMAIN_SHUTOFF_DESTROYED) at lxc/lxc_process.c:174
9 0x00007f1b6ee14106 in virLXCProcessStop (driver=0x7f1b68100240, vm=0x7f1b680ceb70, reason=VIR_DOMAIN_SHUTOFF_DESTROYED) at lxc/lxc_process.c:710
10 0x00007f1b6ee1aa36 in lxcDomainDestroyFlags (dom=0x7f1b5c002560, flags=0) at lxc/lxc_driver.c:1291
11 0x00007f1b6ee1ab1a in lxcDomainDestroy (dom=0x7f1b5c002560) at lxc/lxc_driver.c:1321
12 0x00007f1b82b05be5 in virDomainDestroy (domain=0x7f1b5c002560) at libvirt.c:2303
13 0x00007f1b835a7e85 in remoteDispatchDomainDestroy (server=0x7f1b857419d0, client=0x7f1b8574ae40, msg=0x7f1b8574acf0, rerr=0x7f1b7c9b7c30, args=0x7f1b5c004a50) at remote_dispatch.h:3143
14 0x00007f1b835a7d78 in remoteDispatchDomainDestroyHelper (server=0x7f1b857419d0, client=0x7f1b8574ae40, msg=0x7f1b8574acf0, rerr=0x7f1b7c9b7c30, args=0x7f1b5c004a50, ret=0x7f1b5c0029e0) at remote_dispatch.h:3121
15 0x00007f1b82b93704 in virNetServerProgramDispatchCall (prog=0x7f1b8573af90, server=0x7f1b857419d0, client=0x7f1b8574ae40, msg=0x7f1b8574acf0) at rpc/virnetserverprogram.c:435
16 0x00007f1b82b93263 in virNetServerProgramDispatch (prog=0x7f1b8573af90, server=0x7f1b857419d0, client=0x7f1b8574ae40, msg=0x7f1b8574acf0) at rpc/virnetserverprogram.c:305
17 0x00007f1b82b8c0f6 in virNetServerProcessMsg (srv=0x7f1b857419d0, client=0x7f1b8574ae40, prog=0x7f1b8573af90, msg=0x7f1b8574acf0) at rpc/virnetserver.c:163
18 0x00007f1b82b8c1da in virNetServerHandleJob (jobOpaque=0x7f1b8574dca0, opaque=0x7f1b857419d0) at rpc/virnetserver.c:184
19 0x00007f1b82a64158 in virThreadPoolWorker (opaque=0x7f1b8573cb10) at util/virthreadpool.c:144
20 0x00007f1b82a63ae5 in virThreadHelper (data=0x7f1b8574b9f0) at util/virthreadpthread.c:161
21 0x00007f1b80532f4a in start_thread () from /lib64/libpthread.so.0
22 0x00007f1b7fc4f20d in clone () from /lib64/libc.so.6
Thread 1 (Thread 0x7f1b83546740 (LWP 16297)):
0 0x00007f1b80539714 in __lll_lock_wait () from /lib64/libpthread.so.0
1 0x00007f1b8053516c in _L_lock_516 () from /lib64/libpthread.so.0
2 0x00007f1b80534fbb in pthread_mutex_lock () from /lib64/libpthread.so.0
3 0x00007f1b82a637cf in virMutexLock (m=0x7f1b680ceb80) at util/virthreadpthread.c:85
4 0x00007f1b82a4ccf2 in virObjectLock (anyobj=0x7f1b680ceb70) at util/virobject.c:320
5 0x00007f1b6ee13bd7 in virLXCProcessMonitorInitNotify (mon=0x7f1b3c007210, initpid=4832, vm=0x7f1b680ceb70) at lxc/lxc_process.c:601
6 0x00007f1b6ee11fd3 in virLXCMonitorHandleEventInit (prog=0x7f1b3c001f10, client=0x7f1b3c0038c0, evdata=0x7f1b8574a7d0, opaque=0x7f1b3c007210) at lxc/lxc_monitor.c:109
7 0x00007f1b82b8a196 in virNetClientProgramDispatch (prog=0x7f1b3c001f10, client=0x7f1b3c0038c0, msg=0x7f1b3c003928) at rpc/virnetclientprogram.c:259
8 0x00007f1b82b87030 in virNetClientCallDispatchMessage (client=0x7f1b3c0038c0) at rpc/virnetclient.c:1019
9 0x00007f1b82b876bb in virNetClientCallDispatch (client=0x7f1b3c0038c0) at rpc/virnetclient.c:1140
10 0x00007f1b82b87d41 in virNetClientIOHandleInput (client=0x7f1b3c0038c0) at rpc/virnetclient.c:1312
11 0x00007f1b82b88f51 in virNetClientIncomingEvent (sock=0x7f1b3c0044e0, events=1, opaque=0x7f1b3c0038c0) at rpc/virnetclient.c:1832
12 0x00007f1b82b9e1c8 in virNetSocketEventHandle (watch=3321, fd=54, events=1, opaque=0x7f1b3c0044e0) at rpc/virnetsocket.c:1695
13 0x00007f1b82a272cf in virEventPollDispatchHandles (nfds=21, fds=0x7f1b8574ded0) at util/vireventpoll.c:498
14 0x00007f1b82a27af2 in virEventPollRunOnce () at util/vireventpoll.c:645
15 0x00007f1b82a25a61 in virEventRunDefaultImpl () at util/virevent.c:273
16 0x00007f1b82b8e97e in virNetServerRun (srv=0x7f1b857419d0) at rpc/virnetserver.c:1097
17 0x00007f1b8359db6b in main (argc=2, argv=0x7ffff98dbaa8) at libvirtd.c:1512
The avail_vcpu bitmap has to be allocated before it can be used (using
the maximum allowed value for that). Then for each available VCPU the
bit in the mask has to be set (libxl_bitmap_set takes a bit position
as an argument, not the number of bits to set).
Without this, I would always only get one VCPU for guests created
through libvirt/libxl.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
virCgroupAvailable() implementation calls getmntent_r
without checking if HAVE_GETMNTENT_R is defined, so it fails
to build on platforms without getmntent_r support.
Make virCgroupAvailable() just return false without
HAVE_GETMNTENT_R.
Function qemuOpenFile() haven't had any idea about seclabels applied
to VMs only, so in case the seclabel differed from the "user:group"
from configuration, there might have been issues with opening files.
Make qemuOpenFile() VM-aware, but only optionally, passing NULL
argument means skipping VM seclabel info completely.
However, all current qemuOpenFile() calls look like they should use VM
seclabel info in case there is any, so convert these calls as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=869053
Parsing 'user:group' is useful even outside the DAC security driver,
so expose the most abstract function which has no DAC security driver
bits in itself.
Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports
all share the same namespace, they are all defined as controllers of
type='pci' in libvirt (but with a differing model attribute). Each of
these controllers has a certain connection type upstream, allows
certain connection types downstream, and each can either allow a
single downstream connection at slot 0, or connections from slot 1 -
31.
Right now, we only support the pci-root and pci-bridge devices, both
of which only allow PCI devices to connect, and both which have usable
slots 1 - 31. In preparation for adding other types of controllers
that have different capabilities, this patch 1) adds info to the
qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets
those capabilities appropriately for pci-root and pci-bridge devices,
and 3) validates that the controller being connected to is the proper
type when allocating slots or validating that a user-selected slot is
appropriate for a device..
Having this infrastructure in place will make it much easier to add
support for the other PCI controller types.
While it would be possible to do all the necessary checking by just
storing the controller model in the qemyuDomainPCIAddressBus, it
greatly simplifies all the validation code to also keep a "flags",
"minSlot" and "maxSlot" for each - that way we can just check those
attributes rather than requiring a nearly identical switch statement
everywhere we need to validate compatibility.
You may notice many places where the flags are seemingly hard-coded to
QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI
This is currently the correct value for all PCI devices, and in the
future will be the default, with small bits of code added to change to
the flags for the few devices which are the exceptions to this rule.
Finally, there are a few places with "FIXME" comments. Note that these
aren't indicating places that are broken according to the currently
supported devices, they are places that will need fixing when support
for new PCI controller models is added.
To assure that there was no regression in the auto-allocation of PCI
addresses or auto-creation of integrated pci-root, ide, and usb
controllers, a new test case (pci-bridge-many-disks) has been added to
both the qemuxml2argv and qemuxml2xml tests. This new test defines a
domain with several dozen virtio disks but no pci-root or
pci-bridges. The .args file of the new test case was created using
libvirt sources from before this patch, and the test still passes
after this patch has been applied.
Although these two enums are named ..._LAST, they really had the value
of ..._SIZE. This patch changes their values so that, e.g.,
QEMU_PCI_ADDRESS_SLOT_LAST really is the slot number of the last slot
on a PCI bus.
The implicit IDE, USB, and video controllers provided by the PIIX3
chipset in the pc-* machinetypes are not present on other
machinetypes, so we shouldn't be doing the special checking for
them. This patch places those validation checks into a separate
function that is only called for machine types that have a PIIX3 chip
(which happens to be the i440fx-based pc-* machine types).
One qemuxml2argv test data file had to be changed - the
pseries-usb-multi test had included a piix3-usb-uhci device, which was
being placed at a specific address, and also had slot 2 auto reserved
for a video device, but the pseries virtual machine doesn't actually
have a PIIX3 chip, so even if there was a piix3-usb-uhci driver for
it, the device wouldn't need to reside at slot 1 function 2. I just
changed the .argv file to have the generic slot info for the two
devices that results when the special PIIX3 code isn't executed.
qemuDomainPCIAddressBus was an array of QEMU_PCI_ADDRESS_SLOT_LAST
uint8_t's, which worked fine as long as every PCI bus was
identical. In the future, some PCI busses will allow connecting PCI
devices, and some will allow PCIe devices; also some will only allow
connection of a single device, while others will allow connecting 31
devices.
In order to keep track of that information for each bus, we need to
turn qemuDomainPCIAddressBus into a struct, for now with just one
member:
uint8_t slots[QEMU_PCI_ADDRESS_SLOT_LAST];
Additional members will come in later patches.
The item in qemuDomainPCIAddresSet that contains the array of
qemuDomainPCIAddressBus is now called "buses" to be more consistent
with the already existing "nbuses" (and with the new "slots" array).
Thanks to a lack of coordination between kernel and glibc folks,
it has been impossible to mix code using <linux/in.h> and
<net/in.h> for some time now (see for example commit c308a9a).
On at least RHEL 6, <linux/if_bridge.h> tries to use the kernel
side, and fails due to our desire to use the glibc side elsewhere:
In file included from /usr/include/linux/if_bridge.h:17,
from util/virnetdevbridge.c:42:
/usr/include/linux/in6.h:31: error: redefinition of ‘struct in6_addr’
/usr/include/linux/in6.h:48: error: redefinition of ‘struct sockaddr_in6’
/usr/include/linux/in6.h:56: error: redefinition of ‘struct ipv6_mreq’
Thankfully, the kernel layout of these structs is ABI-compatible,
they only differ in the type system presented to the C compiler.
While there are other versions of kernel headers that avoid the
problem, it is easier to just work around the issue than to expect
all developers to upgrade to working kernel headers.
* src/util/virnetdevbridge.c (includes): Coerce the kernel version
of in.h to not collide with the normal version.
Signed-off-by: Eric Blake <eblake@redhat.com>
dbus 1.2.24 (on RHEL 6) lacks DBUS_TYPE_UNIX_FD; but as we aren't
trying to pass one of those anyways, we can just drop support for
it in our wrapper. Solves this build error introduced in commit
834c9c94:
CC libvirt_util_la-virdbus.lo
util/virdbus.c:242: error: 'DBUS_TYPE_UNIX_FD' undeclared here (not in a function)
* src/util/virdbus.c (virDBusBasicTypes): Drop support for unix fds.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit id '4421e257' strdup'd devAlias, but didn't free
Running qemuhotplugtest under valgrind resulted in the following:
==7375== 9 bytes in 1 blocks are definitely lost in loss record 11 of 70
==7375== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==7375== by 0x37C1085D71: strdup (strdup.c:42)
==7375== by 0x4CBBD5F: virStrdup (virstring.c:554)
==7375== by 0x4CFF9CB: virDomainEventDeviceRemovedNew (domain_event.c:1174)
==7375== by 0x427791: qemuDomainRemoveChrDevice (qemu_hotplug.c:2508)
==7375== by 0x42C65D: qemuDomainDetachChrDevice (qemu_hotplug.c:3357)
==7375== by 0x41C94F: testQemuHotplug (qemuhotplugtest.c:115)
==7375== by 0x41D817: virtTestRun (testutils.c:168)
==7375== by 0x41C400: mymain (qemuhotplugtest.c:322)
==7375== by 0x41DF3A: virtTestMain (testutils.c:764)
==7375== by 0x37C1021A04: (below main) (libc-start.c:225)
Commit 'c8695053' resulted in the following:
Coverity error seen in the output:
ERROR: REVERSE_INULL
FUNCTION: lxcProcessAutoDestroy
Due to the 'dom' being checked before 'dom->persistent' since 'dom'
is already dereferenced prior to that.
Currently the LXC driver creates the VM's cgroup prior to
forking, and then libvirt_lxc moves the child process
into the cgroup. This won't work with systemd whose APIs
do the creation of cgroups + attachment of processes atomically.
Fortunately we simply move the entire cgroups setup into
the libvirt_lxc child process. We make it take place before
fork'ing into the background, so by the time virCommandRun
returns in the LXC driver, the cgroup is guaranteed to be
present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the QEMU driver creates the VM's cgroup prior to
forking, and then uses a virCommand hook to move the child
into the cgroup. This won't work with systemd whose APIs
do the creation of cgroups + attachment of processes atomically.
Fortunately we have a handshake taking place between the
QEMU driver and the child process prior to QEMU being exec()d,
which was introduced to allow setup of disk locking. By good
fortune this synchronization point can be used to enable the
QEMU driver to do atomic setup of cgroups removing the use
of the hook script.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupNewDomainDriver and virCgroupNewDriver methods
are obsolete now that we can auto-detect existing cgroup
placement. Delete them to reduce code bloat.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the new virCgroupNewDetect function to determine cgroup
placement of existing running VMs. This will allow the legacy
cgroups creation APIs to be removed entirely
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virCgroupIsValidMachine API to check whether an auto
detected cgroup is valid for a machine. This lets us
check if a VM has just been placed into some generic
shared cgroup, or worse, the root cgroup
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virCgroupNewDetect API which is used to initialize a
cgroup object with the placement of an arbitrary process.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If systemd machine does not exist, return -2 instead of -1,
so that applications don't need to repeat the tedious error
checking code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Current code for handling dbus errors only works for errors
received from the remote application itself. We must also
handle errors emitted by the bus itself, for example, when
it fails to spawn the target service.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a privileged field to storageDriverState
Use the privileged value in order to generate a connection which could
be passed to the various storage backend drivers.
In particular, the iSCSI driver will need a connect in order to perform
pool authentication using the 'chap' secrets and the RBD driver utilizes
the connection during pool refresh for pools using 'ceph' secrets.
For now that connection will be to be to qemu driver until a mechanism
is devised to get a connection to just the secret driver without qemu.
Update virStorageBackendRBDOpenRADOSConn() to use the internal API to the
secret driver in order to get the secret value instead of the external
virSecretGetValue() path. Without the flag VIR_SECRET_GET_VALUE_INTERNAL_CALL
there is no way to get the value of private secret.
This also requires ensuring there is a connection which wasn't true for
for the refreshPool() path calls from storageDriverAutostart() prior to
adding support for the connection to a qemu driver. It seems calls to
virSecretLookupByUUIDString() and virSecretLookupByUsage() from the
refreshPool() path would have failed with no way to find the secret - that is
theoretically speaking since the 'conn' was NULL the failure would have been
"failed to find the secret".
Although the XML for CHAP authentication with plain "password"
was introduced long ago, the function was never implemented. This
patch replaces the login/password mechanism by following the
'ceph' (or RBD) model of using a 'username' with a 'secret' which
has the authentication information.
This patch performs the authentication during startPool() processing
of pools with an authType of VIR_STORAGE_POOL_AUTH_CHAP specified
for iSCSI pools.
There are two types of CHAP configurations supported for iSCSI
authentication:
* Initiator Authentication
Forward, one-way; The initiator is authenticated by the target.
* Target Authentication
Reverse, Bi-directional, mutual, two-way; The target is authenticated
by the initiator; This method also requires Initiator Authentication
This only supports the "Initiator Authentication". (I don't have any
enterprise iSCSI env for testing, only have a iSCSI target setup with
tgtd, which doesn't support "Target Authentication").
"Discovery authentication" is not supported by tgt yet too. So this only
setup the session authentication by executing 3 iscsiadm commands, E.g:
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.authmethod" -v "CHAP" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.username" -v "Jim" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.password" -v "Jimsecret" --op update
During qemuTranslateDiskSourcePool() execution, if the srcpool has been
defined with authentication information, then for iSCSI pools copy the
authentication and host information to virDomainDiskDef.
Due to a goto statement missed when refactoring in 2771f8b74c
when acquiring of a domain job failed the error path was not taken. This
resulted into a crash afterwards as an extra reference was removed from a
domain object leading to it being freed. An attempt to list the domains
leaded to a crash of the daemon afterwards.
https://bugzilla.redhat.com/show_bug.cgi?id=928672
Commit 834c9c94 introduced virDBusMessageEncode and
virDBusMessageDecode functions, however corresponding stubs
were not added to !WITH_DBUS section, therefore 'make check'
started to fail when compiled w/out dbus support like that:
Expected symbol virDBusMessageDecode is not in ELF library
The translation must be done before both of cgroup and security
setting, otherwise since the disk source is not translated yet,
it might be skipped on cgroup and security setting.
virDomainDiskDefForeachPath is not only used by the security
setting helpers, also used by cgroup setting helpers, so this
is to ignore the volume type disk with mode="direct" for cgroup
setting.
The difference with already supported pool types (dir, fs, block)
is: there are two modes for iscsi pool (or network pools in future),
one can specify it either to use the volume target path (the path
showed up on host) with mode='host', or to use the remote URI qemu
supports (e.g. file=iscsi://example.org:6000/iqn.1992-01.com.example/1)
with mode='direct'.
For 'host' mode, it copies the volume target path into disk->src. For
'direct' mode, the corresponding info in the *one* pool source host def
is copied to disk->hosts[0].
There are two ways to use a iSCSI LUN as disk source for qemu.
* The LUN's path as it shows up on host, e.g.
/dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1
* The libiscsi URI from the storage pool source element host attribute, e.g.
iscsi://demo.org:6000/iqn.1992-01.com.example/1
For a "volume" type disk, if the specified "pool" is of iscsi
type, we should support to use the LUN in either of above 2 ways.
That's why to introduce a new XML tag "mode" for the disk source
(libvirt should support iscsi pool with libiscsi, but it's another
new feature, which should be done later).
The "mode" can be either of "host" or "direct". Use "host" to indicate
use of the LUN with the path as it shows up on host. Use "direct" to
indicate to use it with the source pool host URI (future patches may support
to use network type libvirt storage too, e.g. Ceph)
This is another cleanup before extracting platform-specific
parts from bridge_driver.
Rename struct network_driver to _virNetworkDriverState and
add appropriate typedefs: virNetworkDriverState and
virNetworkDriverStatePtr.
This will help us to avoid potential problems when moving
this struct to the .h file.
Convert the remaining methods in vircgroup.c to report errors
instead of returning errno values.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virErrorSetErrnoFromLastError and virLastErrorIsSystemErrno
to simplify code which wants to handle system errors in a more
graceful fashion.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To register virtual machines and containers with systemd-machined,
and thus have cgroups auto-created, we need to talk over DBus.
This is somewhat tedious code, so introduce a dedicated function
to isolate the DBus call in one place.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Doing DBus method calls using libdbus.so is tedious in the
extreme. systemd developers came up with a nice high level
API for DBus method calls (sd_bus_call_method). While
systemd doesn't use libdbus.so, their API design can easily
be ported to libdbus.so.
This patch thus introduces methods virDBusCallMethod &
virDBusMessageRead, which are based on the code used for
sd_bus_call_method and sd_bus_message_read. This code in
systemd is under the LGPLv2+, so we're license compatible.
This code is probably pretty unintelligible unless you are
familiar with the DBus type system. So I added some API
docs trying to explain how to use them, as well as test
cases to validate that I didn't screw up the adaptation
from the original systemd code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Until now CPU features inherited from a specified CPU model could only
be overridden with 'disable' policy. With this patch, any explicitly
specified feature always overrides the same feature inherited from a CPU
model regardless on the specified policy.
The CPU in x86-exact-force-Haswell.xml would previously be incompatible
with x86-host-SandyBridge.xml CPU even though x86-host-SandyBridge.xml
provides all features required by x86-exact-force-Haswell.xml.
If no explicit driver is set for an image backed filesystem,
set it to use the loop driver (if raw) or nbd driver (if
non-raw)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A couple of places in LXC setup for filesystems did not do
a "goto cleanup" after reporting errors. While fixing this,
also add in many more debug statements to aid troubleshooting
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The alias for hostdevs of type SCSI can be too long for QEMU if
larger LUNs are encountered. Here's a real life example:
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='19' unit='1088634913'/>
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
this results in a too long drive id, resulting in QEMU yelling
Property 'scsi-generic.drive' can't find value 'drive-hostdev-scsi_host0-0-19-1088634913'
This commit changes the alias back to the default hostdev$(index)
scheme.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
In case libvirtd is asked to unplug a device but the device is actually
unplugged later when libvirtd is not running, we need to detect that and
remove such device when libvirtd starts again and reconnects to running
domains.
Attempts to start a domain with both SELinux and DAC security
modules loaded will deadlock; latent problem introduced in commit
fdb3bde and exposed in commit 29fe5d7. Basically, when recursing
into the security manager for other driver's prefork, we have to
undo the asymmetric lock taken at the manager level.
Reported by Jiri Denemark, with diagnosis help from Dan Berrange.
* src/security/security_stack.c (virSecurityStackPreFork): Undo
extra lock grabbed during recursion.
Signed-off-by: Eric Blake <eblake@redhat.com>
Makefiles are another easy file to enforce line limits.
Mostly straightforward; interesting tricks worth noting:
src/Makefile.am: $(confdir) was already defined, use it in more places
tests/Makefile.am: path_add and VG required some interesting compression
* cfg.mk (sc_prohibit_long_lines): Add another test.
* Makefile.am: Fix offenders.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 75c1256 states that virGetGroupList must not be called
between fork and exec, then commit ee777e99 promptly violated
that for lxc's use of virSecurityManagerSetProcessLabel. Hoist
the supplemental group detection to the time that the security
manager needs to fork. Qemu is safe, as it uses
virSecurityManagerSetChildProcessLabel which in turn uses
virCommand to determine supplemental groups.
This does not fix the fact that virSecurityManagerSetProcessLabel
calls virSecurityDACParseIds calls parseIds which eventually
calls getpwnam_r, which also violates fork/exec async-signal-safe
safety rules, but so far no one has complained of hitting
deadlock in that case.
* src/security/security_dac.c (_virSecurityDACData): Track groups
in private data.
(virSecurityDACPreFork): New function, to set them.
(virSecurityDACClose): Clean up new fields.
(virSecurityDACGetIds): Alter signature.
(virSecurityDACSetSecurityHostdevLabelHelper)
(virSecurityDACSetChardevLabel, virSecurityDACSetProcessLabel)
(virSecurityDACSetChildProcessLabel): Update callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch wants the DAC security manager to be able to safely
get the supplemental group list for a given uid, but at the time
of a fork rather than during initialization so as to pick up on
live changes to the system's group database. This patch adds the
framework, including the possibility of a pre-fork callback
failing.
For now, any driver that implements a prefork callback must be
robust against the possibility of being part of a security stack
where a later element in the chain fails prefork. This means
that drivers cannot do any action that requires a call to postfork
for proper cleanup (no grabbing a mutex, for example). If this
is too prohibitive in the future, we would have to switch to a
transactioning sequence, where each driver has (up to) 3 callbacks:
PreForkPrepare, PreForkCommit, and PreForkAbort, to either clean
up or commit changes made during prepare.
* src/security/security_driver.h (virSecurityDriverPreFork): New
callback.
* src/security/security_manager.h (virSecurityManagerPreFork):
Change signature.
* src/security/security_manager.c (virSecurityManagerPreFork):
Optionally call into driver, and allow returning failure.
* src/security/security_stack.c (virSecurityDriverStack):
Wrap the handler for the stack driver.
* src/qemu/qemu_process.c (qemuProcessStart): Adjust caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
These helpers use the remembered host capabilities to retrieve the cpu
map rather than query the host again. The intended usage for this
helpers is to fix automatic NUMA placement with strict memory alloc. The
code doing the prepare needs to pin the emulator process only to cpus
belonging to a subset of NUMA nodes of the host.
When user does not specify any model for scsi controller, or worse, no
controller at all, but libvirt automatically adds scsi controller with
no model, we are not searching for virtio-scsi and thus this can fail
for example on qemu which doesn't support lsi logic adapter.
This means that when qemu on x86 doesn't support lsi53c895a and the
user adds the following to an XML without any scsi controller:
<disk ...>
...
<target dev='sda'>
</disk>
libvirt fails like this:
# virsh define asdf.xml
error: Failed to define domain from asdf.xml
error: internal error Unable to determine model for scsi controller
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=974943
With the majority of fields in the virLXCDriverPtr struct
now immutable or self-locking, there is no need for practically
any methods to be using the LXC driver lock. Only a handful
of helper APIs now need it.
The activeUsbHostdevs item in LXCDriver are lockable, but the lock has
to be called explicitly. Call the virObject(Un)Lock() in order to
achieve mutual exclusion once lxcDriverLock is removed.
The 'driver->caps' pointer can be changed on the fly. Accessing
it currently requires the global driver lock. Isolate this
access in a single helper, so a future patch can relax the
locking constraints.
Currently the virLXCDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virLXCDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virLXCDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.
NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.
When virAsprintf was changed from a function to a macro
reporting OOM error in dc6f2da, it was documented as returning
0 on success. This is incorrect, it returns the number of bytes
written as asprintf does.
Some of the functions were converted to use virAsprintf's return
value directly, changing the return value on success from 0 to >= 0.
For most of these, this is not a problem, but the change in
virPCIDriverDir breaks PCI passthrough.
The return value check in virhashtest pre-dates virAsprintf OOM
conversion.
vmwareMakePath seems to be unused.
Merge the virCommandPreserveFD / virCommandTransferFD methods
into a single virCommandPasFD method, and use a new
VIR_COMMAND_PASS_FD_CLOSE_PARENT to indicate their difference
in behaviour
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wire up the new virDomainCreate{XML}WithFiles methods in the
LXC driver, so that FDs get passed down to the init process.
The lxc_container code needs to do a little dance in order
to renumber the file descriptors it receives into linear
order, starting from STDERR_FILENO + 1.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the following commit:
commit 03d813bbcd
Author: Marek Marczykowski <marmarek@invisiblethingslab.com>
Date: Thu May 23 02:01:30 2013 +0200
remote: fix dom->id after virDomainCreateWithFlags
The virDomainCreateWithFlags remote client helper was made to
invoke REMOTE_PROC_DOMAIN_LOOKUP_BY_UUID to refresh the 'id'
of the domain, following the pattern used in the previous
virDomainCreate method impl.
The remote protocol for virDomainCreateWithFlags though did
actually fix the design flaw in virDomainCreate, by directly
returning the new domain info. For some reason, this data was
never used. So we can just use that data now instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since they make use of file descriptor passing, the remote protocol
methods for virDomainCreate{XML}WithFiles must be written by hand.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With container based virt, it is useful to be able to pass
pre-opened file descriptors to the container init process.
This allows for containers to be auto-activated from incoming
socket connections, passing the active socket into the container.
To do this, introduce a pair of new APIs, virDomainCreateXMLWithFiles
and virDomainCreateWithFiles, which accept an array of file
descriptors. For the LXC driver, UNIX file descriptor passing
will be used to send them to libvirtd, which will them pass
them down to libvirt_lxc, which will then pass them to the container
init process.
This will only be implemented for LXC right now, but the design
is generic enough it could work with other hypervisors, hence
I suggest adding this to libvirt.so, rather than libvirt-lxc.so
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add support for creating disk-only (no memory) snapshots in esx, and
for quiescing the VM before taking the snapshot. The VMware API
supports these operations directly, so adding support to libvirt is
just a matter of setting the flags correctly when calling
VMware. VIR_DOMAIN_SNAPSHOT_CREATE_DISK_ONLY and
VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE are now valid flags for esx.
Signed-off-by: Eric Blake <eblake@redhat.com>
Although, having it depending on Xen >= 4.3 (by using the proper
libxl feature flag).
Xen currently implements a NUMA placement policy which is basically
the same as the 'interleaved' policy of `numactl', although it can
be applied on a subset of the available nodes. We therefore hardcode
"interleave" as 'numa_mode', and we use the newly introduced libxl
interface to figure out what nodes a domain spans ('numa_nodeset').
With this change, it is now possible to query the NUMA node
affinity of a running domain:
[raistlin@Zhaman ~]$ sudo virsh --connect xen:/// list
Id Name State
----------------------------------------------------
23 F18_x64 running
[raistlin@Zhaman ~]$ sudo virsh --connect xen:/// numatune 23
numa_mode : interleave
numa_nodeset : 1
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
domainGetNumaParameters has a string typed parameter, hence it
is necessary for the libxl driver to support this.
This change implements the connectSupportsFeature hook for the
libxl driver, advertising that VIR_DRV_FEATURE_TYPED_PARAM_STRING
is supported.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Eric Blake <eblake@redhat.com>
Xen 4.3 changes sysctl version to 10 and domctl version to 9. Update
the hypervisor driver to work with those.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit 75c1256 states that virGetGroupList must not be called
between fork and exec, then commit ee777e99 promptly violated
that for lxc.
Patch originally posted by Eric Blake <eblake@redhat.com>.
Reuse the buffer for getline and track buffer allocation
separately from the string length to prevent unlikely
out-of-bounds memory access.
This fixes the following leak that happened when zero bytes were read:
==404== 120 bytes in 1 blocks are definitely lost in loss record 1,344 of 1,671
==404== at 0x4C2C71B: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==404== by 0x906F862: getdelim (iogetdelim.c:68)
==404== by 0x52A48FB: virCgroupPartitionNeedsEscaping (vircgroup.c:1136)
==404== by 0x52A0FB4: virCgroupPartitionEscape (vircgroup.c:1171)
==404== by 0x52A0EA4: virCgroupNewDomainPartition (vircgroup.c:1450)
While generating seclabels, we check the seclabel stack if required
driver is in the stack. If not, an error is returned. However, it is
possible for a seclabel to not have any model set (happens with LXC
domains that have just <seclabel type='none'>). If that's the case,
we should just skip the iteration instead of calling STREQ(NULL, ...)
and SIGSEGV-ing subsequently.
Currently, if the primary security driver is 'none', we skip
initializing caps->host.secModels. This means, later, when LXC domain
XML is parsed and <seclabel type='none'/> is found (see
virSecurityLabelDefsParseXML), the model name is not copied to the
seclabel. This leads to subsequent crash in virSecurityManagerGenLabel
where we call STREQ() over the model (note, that we are expecting model
to be !NULL).
Introduced in commit 24b08219; compilation on RHEL 6.4 complained:
qemu/qemu_hotplug.c: In function 'qemuDomainAttachChrDevice':
qemu/qemu_hotplug.c:1257: error: declaration of 'remove' shadows a global declaration [-Wshadow]
/usr/include/stdio.h:177: error: shadowed declaration is here [-Wshadow]
* src/qemu/qemu_hotplug.c (qemuDomainAttachChrDevice): Avoid the
name 'remove'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Otherwise the container will fail to start if we
enable user namespace, since there is no rights to
do mknod in uninit user namespace.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
lxc driver will use this function to change the owner
of hot added devices.
Move virLXCControllerChown to lxc_container.c and Rename
it to lxcContainerChown.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
A part of the returned monitor response was freed twice and caused
crashes of the daemon when using guest agent cpu count retrieval.
# virsh vcpucount dom --guest
Introduced in v1.0.6-48-gc6afcb0
Not all RBD (Ceph) storage pools have cephx authentication turned on,
so "secret" might not be initialized.
It could also be that the secret couldn't be located.
Only call virSecretFree() if "secret" is initialized earlier.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Implement the new API that will handle setting the balloon driver statistics
collection period in order to enable or disable the collection dynamically.
