Replace the reimplementation of the XSLT processing custom target with
an identical copy form docs/meson.build and a comment to keep them in
sync.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
On some architectures, e.g. aarch64 and s390x, the output of
`virsh capabilities` is not suitable for use in
`virsh hypervisor-cpu-baseline`. Expand the description of the
man page to make this explicit.
https://bugzilla.redhat.com/show_bug.cgi?id=1850654
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The former is a short hand for the latter and is already widely used in
the docs. Using the short hand avoids incompatibility with the alternate
impl of rst2html5.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
After meson conversion the man pages started to contain the table of
contents.
In autoconf we prevented this by a 'grep -v ::contents' in the command
building the manpages.
A more cultured solution is to strip out the 'contents' docutils element
directly.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These fields have existed for a very long time but they were
never documented in virsh(1).
https://bugzilla.redhat.com/show_bug.cgi?id=1354391
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Allow to filter for CSS devices.
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
This allows:
a) migration without access to network
b) complete control of the migration stream
c) easy migration between containerised libvirt daemons on the same host
Resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Local socket connections were outright disabled because there was no "server"
part in the URI. However, given how requirements and usage scenarios are
evolving, some management apps might need the source libvirt daemon to connect
to the destination daemon over a UNIX socket for peer2peer migration. Since we
cannot know where the socket leads (whether the same daemon or not) let's decide
that based on whether the socket path is non-standard, or rather explicitly
specified in the URI. Checking non-standard path would require to ask the
daemon for configuration and the only misuse that it would prevent would be a
pretty weird one. And that's not worth it. The assumption is that whenever
someone uses explicit UNIX socket paths in the URI for migration they better
know what they are doing.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Adds new typed param for migration and uses this as a UNIX socket path that
should be used for the NBD part of migration. And also adds virsh support.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
For iscsi-direct pool, the initiator is necessary for pool defining:
<pool type="iscsi-direct">
...
<initiator>
<iqn name="iqn.2013-06.com.example:iscsi-initiator"/>
</initiator>
...
</pool>
Add --source-initiator to fill the initiator iqn for
pool-create-as/pool-define-as subcommands.
https://bugzilla.redhat.com/show_bug.cgi?id=1658082
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changes:
- Update the descriptions of --current & --config flags.
For --config, the reason to rephrase "next boot" to "next start"
is: "Next boot may still imply somebody selecting "reboot" in the
guest OS and fully expecting the changes to be applied." (per Peter
Krempa)
For --current, existing documentation says:
"If *--current* is specified, affect the current guest state."
It's not entirely clear what states can "current" mean or imply. So
rephrase it in context of the other two related flags --live and
--config.
- While at it, I also took the liberty to replace the few occurrences
of "peristent domain[s]" with "persistent guest[s]"
Fix all occurrences (i.e. as many as I could spot) of this.
(Thanks: Dan Berrangé on IRC.)
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The timeout argument for guest-agent-timeout is optional but it did not
have proper default value specified. Also update the virsh man page
accordingly.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some commands were improperly converted from original POD file. Their
names were stripped after the first dash.
Fixes: ab06dd9db3
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 862cf2ace4 modified the generator
to base edit links in the root of the repository but forgot to add the
'docs/' prefix to the code generating kbase articles, manpages and the
internals documentation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In meson.build we define sanlock_dep only if it is available but in
addition we add 'WITH_SANLOCK' into conf. Use the presence of
'WITH_SANLOCK' in conf to figure out if we need to install
virt-sanlock-cleanup man page.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
'docutils' add a stylesheet to the output html file for direct
consumption. Since we use the html files just as an intermediate step
which is post-processed to add our own stylesheet and drop the docutils
one in the process we can ask 'rst2html' to not add any for an
intermediate file with less garbage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On Linux, changing the nodeset on 'numatune' does not imply that
the guest memory will be migrated on the spot to the new nodeset.
The memory migration is tied on guest usage of the memory pages,
and an idle guest will take longer to have its memory migrated
to the new nodeset.
This is a behavior explained in detail in the Linux kernel
documentation in Documentation/admin-guide/cgroup-v1/cpusets.rst.
The user doesn't need this level of detail though - just needs
his/her expectations under check. Running 'numastat' and hoping
for instant memory migration from the previous nodeset to the new
one is not viable.
There's also parts of the memory that are locked by QEMU in the
same place, e.g. when VFIO devices are present. Let's also
mention it as another factor that impacts the results the
user might expect from NUMA memory migration with numatune.
https://bugzilla.redhat.com/show_bug.cgi?id=1640869
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Update the manpage for the 'server-update-tls' command
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wu Qingliang <wuqingliang4@huawei.com>
Simplify gathering the actual return value from a passed-through QMP
command when using 'qemu-monitor-command' by adding '--return-value'
switch which just extracts the 'return' section and alternatively
reports an error if the section is not present.
This simplifies gathering of some test data where the full reply would
need to be trimmed just for the actual return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Mention that we actually by default use QMP and clarify the rest
of the documentation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We currently note that the QEMU embedded driver is experimental
in the drvqemu.html file, but we should do the same in the
virt-qemu-run man page.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
You can't have two links with the same text when using named
link references (a single "_"). If you need multiple links
with the same text you must use anonymous link references
(a double "_").
There are also some duplicate section headers causing the
same problem with duplicate link targets.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify human usage of secret-set-value by adding --interactive which
will read the value of the secret from the terminal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow using the contents of --file without base64 decoding.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Print a warning if users pass in secrets as command line arguments and
mention it in the man page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The necessity to specify the secret value as command argument is
insecure. Allow reading the secret from a file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Users might want to get the raw value instead of dealing with base64
encoding. This might be useful for redirection to file and also for
simple human-readable secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fix a documentation generation error:
System Message: WARNING/2 (<stdin>, line 15); backlink
Inline literal start-string without end-string.
As well as the 'independant' typo.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: d600667278
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The previous "QEMU shim" proof of concept was taking an approach of only
caring about initial spawning of the QEMU process. It was then
registered with the libvirtd daemon who took over management of it. The
intent was that later libvirtd would be refactored so that the shim
retained control over the QEMU monitor and libvirt just forwarded APIs
to each shim as needed. This forwarding of APIs would require quite alot
of significant refactoring of libvirtd to achieve.
This impl thus takes a quite different approach, explicitly deciding to
keep the VMs completely separate from those seen & managed by libvirtd.
Instead it uses the new "qemu:///embed" URI scheme to embed the entire
QEMU driver in the shim, running with a custom root directory.
Once the driver is initialization, the shim starts a VM and then waits
to shutdown automatically when QEMU shuts down, or should kill QEMU if
it is terminated itself. This ought to use the AUTO_DESTROY feature but
that is not yet available in embedded mode, so we rely on installing a
few signal handlers to gracefully kill QEMU. This isn't reliable if
we crash of course, but you can restart with the same root dir.
Note this program does not expose any way to manage the QEMU process,
since there's no RPC interface enabled. It merely starts the VM and
cleans up when the guest shuts down at the end. This program is
installed to /usr/bin/virt-qemu-run enabling direct use by end users.
Most use cases will probably want to integrate the concept directly
into their respective application codebases. This standalone binary
serves as a nice demo though, and also provides a way to measure
performance of the startup process quite simply.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reported at build time by lintian:
manpage-section-mismatch usr/share/man/man8/virt-sanlock-cleanup.8.gz:3 8 != 1
And indeed the rst file says 1 while the makefile say 8:
if WITH_SANLOCK
manpages8_rst += manpages/virt-sanlock-cleanup.rst
else ! WITH_SANLOCK
8 "System administration commands and daemons" seems to match, so fix
the rst file to match.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Our virsh already has 'domhostname' command. Add '--source'
argument to it so that users can chose between 'lease' and
'agent' sources. Also, implement completer for the argument.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add documentation for additional reason why snapshot-revert might need
to be forced. This explains why restoring an inactive snapshot while
there is managed saved state is refused by default.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reformat explanations of the snapshot-revert force reasons in
preparation for more to be added. This is a simple reformat without any
wording changes.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Trivially replace usages of qemu and lxc in the virsh manpage with their
more heavily used and (according to Wikipedia) correct upper-case
spellings QEMU and LXC.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Suggested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Document that --diskspec DISK,snapshot=no disables snapshot for the
given disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
