ADD_ARG_LIT should only be used for literal arguments,
since it duplicates the memory. Since virBufferContentAndReset
is already allocating memory, we should only use ADD_ARG.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
esxVI_WaitForTaskCompletion can take a UUID to lookup the
corresponding domain and check if the current task for it
is blocked by a question. It calls another function to do
this: esxVI_LookupAndHandleVirtualMachineQuestion looks up
the VirtualMachine and checks for a question. If there is
a question it calls esxVI_HandleVirtualMachineQuestion to
handle it.
If there was no question or it has been answered the call
to esxVI_LookupAndHandleVirtualMachineQuestion returns 0.
If any error occurred during the lookup and answering
process -1 is returned. The problem with this is, that -1
is also returned when there was no error but the question
could not be answered. So esxVI_WaitForTaskCompletion cannot
distinguish between this two situations and reports that a
question is blocking the task even when there was actually
another problem.
This inherent problem didn't surface until vSphere 4.1 when
you try to define a new domain. The driver tries to lookup
the domain that is just in the process of being registered.
There seems to be some kind of race condition and the driver
manages to issue a lookup command before the ESX server was
able to register the domain. This used to work before.
Due to the return value problem described above the driver
reported a false error message in that case.
To solve this esxVI_WaitForTaskCompletion now takes an
additional occurrence parameter that describes whether or
not to expect the domain to be existent. Also add a new
parameter to esxVI_LookupAndHandleVirtualMachineQuestion
that allows to distinguish if the call returned -1 because
of an actual error or because the question could not be
answered.
'./autobuild.sh' with lcov installed discovered that our
coverage support has been bit-rotting for a while. This
restores it back to a successful state, although I have
not yet spent any time looking through the resulting files to
look for low-hanging fruit in the unit test coverage front.
* configure.ac: Clear COMPILER_FLAGS at right place.
* Makefile.am (cov): Newer genhtml no longer likes plain -s.
* m4/compiler-flags.m4 (gl_COMPILER_FLAGS): Don't AC_SUBST
COMPILER_FLAGS; it is a shell variable for use in configure only.
* src/Makefile.am (AM_CFLAGS, AM_LDFLAGS): New variables, to make
it easier to provide global flag additions. Use throughout, to
uniformly apply coverage flags.
* .gitignore: Globally ignore gcov output.
* daemon/.gitignore: Simplify.
* src/.gitignore: Likewise.
* tests/.gitignore: Likewise.
The recent switch to enable -Wlogical-op paid off again.
gcc 4.5.0 (rawhide) is smarter than 4.4.4 (Fedora 13).
* src/xen/xend_internal.c (xenDaemonAttachDeviceFlags)
(xenDaemonUpdateDeviceFlags, xenDaemonDetachDeviceFlags): Use
correct operator.
Signed-off-by: Eric Blake <eblake@redhat.com>
src/lxc/veth.c:150: VIR_DEBUG(_("Failed to delete '%s' (%d)"),
src/lxc/veth.c:188: VIR_DEBUG(_("Failed to disable '%s' (%d)"),
maint.mk: do not mark these strings for translation
* src/lxc/veth.c (vethDelete, vethInterfaceUpOrDown): Don't
translate VIR_DEBUG.
Previously, the functions in src/lxc/veth.c could sometimes return
positive values on failure rather than -1. This made accurate error
reporting difficult, and led to one failure to catch an error in a
calling function.
This patch makes all the functions in veth.c consistently return 0 on
success, and -1 on failure. It also fixes up the callers to the veth.c
functions where necessary.
Note that this patch may be related to the bug:
https://bugzilla.redhat.com/show_bug.cgi?id=607496.
It will not fix the bug, but should unveil what happens.
* po/POTFILES.in - add veth.c, which previously had no translatable strings
* src/lxc/lxc_controller.c
* src/lxc/lxc_container.c
* src/lxc/lxc_driver.c - fixup callers to veth.c, and remove error logs,
as they are now done in veth.c
* src/lxc/veth.c - make all functions consistently return -1 on error.
* src/lxc/veth.h - use ATTRIBUTE_NONNULL to protect against NULL args.
This fixes a leak described in
https://bugzilla.redhat.com/show_bug.cgi?id=590073
xenUnifiedDomainInfoList has a pointer to a list of pointers to
xenUnifiedDomain. We were freeing up all the domains, but neglecting
to free the list.
This was found by Paolo Bonzini <pbonzini@redhat.com>.
If detecting the FLR flag of a pci device fails, then we
could run into the situation of trying to close a file
descriptor twice, once in pciInitDevice() and once in pciFreeDevice().
Fix that by removing the pciCloseConfig() in pciInitDevice() and
just letting pciFreeDevice() handle it.
Thanks to Chris Wright for pointing out this problem.
While we are at it, fix an error check. While it would actually
work as-is (since success returns 0), it's still more clear to
check for < 0 (as the rest of the code does).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.
This will be used to differentiate between a serial vs. virtio console for
QEMU.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
targetType only tracks the actual <target> format we are parsing. Currently
we only fill abide this value for channel devices.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There is actually a difference between the character device type (serial,
parallel, channel, ...) and the target type (virtio, guestfwd). Currently
they are awkwardly conflated.
Start to pull them apart by renaming targetType -> deviceType. This is
an entirely mechanical change.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
During function test of the 802.1Qbg implementation in lldpad we came
across a small problem in the handling of the netlink message
corresponding to PORT_PROFILE_RESPONSE_INPROGRESS. This should not
result in returning the default rc=1.
- src/util/macvtap.c: fix getPortProfileStatus() to return 0 in that
case and also fix an indentation problem
QEMU has had two different syntax for disk cache options
Old: on|off
New: writeback|writethrough|none
QEMU recently added another 'unsafe' option which broke the
libvirt check. We can avoid this & future breakage, if we
do a negative check for the old syntax, instead of a positive
check for the new syntax
* src/qemu/qemu_conf.c: Invert cache option check
Add a new element to the <os> block:
<bootmenu enable="yes|no"/>
Which maps to -boot,menu=on|off on the QEMU command line.
I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.
Some buggy PCI devices actually support FLR, but
forget to advertise that fact in their PCI config space.
However, Virtual Functions on SR-IOV devices are
*required* to support FLR by the spec, so force has_flr
on if this is a virtual function.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When doing a PCI secondary bus reset, we must be sure that there are no
active devices on the same bus segment. The active device tracking is
designed to only track host devices that are active in use by guests.
This ignores host devices that are actively in use by the host. So the
current logic will reset host devices.
Switch this logic around and allow sbus reset when we are assigning all
devices behind a bridge to the same guest at guest startup or as a result
of a single attach-device command.
* src/util/pci.h: change signature of pciResetDevice to add an
inactive devices list
* src/qemu/qemu_driver.c src/xen/xen_driver.c: use (or not) the new
functionality of pciResetDevice() depending on the place of use
* src/util/pci.c: implement the interface and logic changes
- src/qemu/qemu_driver.c: Eliminate code duplication by using the new
helpers qemuPrepareHostdevPCIDevices and qemuDomainReAttachHostdevDevices.
This reduces the number of open coded calls to pciResetDevice.
- src/qemu/qemu_driver.c: These new helpers take hostdev list and count
directly rather than getting them indirectly from domain definition.
This will allow reuse for the attach-device case.
- src/qemu/qemu_driver.c: Update qemuGetPciHostDeviceList to take a
hostdev list and count directly, rather than getting this indirectly
from domain definition. This will allow reuse for the attach-device case.
Add a pointer to the primary context of a connection and use it in all
driver functions that don't dependent on the context type. This includes
almost all functions that deal with a virDomianPtr. Therefore, using
a vpx:// connection allows you to perform all the usual domain related
actions like start, destroy, suspend, resume, dumpxml etc.
Some functions that require an explicitly specified ESX server don't work
yet. This includes the host UUID, the hostname, the general node info, the
max vCPU count and the free memory. Also not working yet are migration and
defining new domains.
Since 070f61002f the vcenter query
parameter has been ignored, because the refactoring to use
esxUtil_ParseQuery was incomplete. This effectively broke migration,
because the vcenter query parameter is essential for a migration.
Commit 68719c4bdd added the
p option to control disk format probing, but it wasn't added
to the getopt_long optstring parameter.
Add the p option to the getopt_long optstring parameter.
Commit a885334499 added this
function and wrapped vah_add_file in it. vah_add_file may
return -1, 0, 1. It returns 1 in case the call to valid_path
detects a restricted file. The original code treated a return
value != 0 as error. The refactored code treats a return
value < 0 as error. This triggers segfault in virt-aa-helper
and breaks virt-aa-helper-test for the restricted file tests.
Make sure that add_file_path returns -1 on error.
virt-aa-helper used to ignore errors when opening files.
Commit a885334499 refactored
the related code and changed this behavior. virt-aa-helper
didn't ignore open errors anymore and virt-aa-helper-test
fails.
Make sure that virt-aa-helper ignores open errors again.
Thanks to DV for knocking together the Relax-NG changes
quickly for me.
Changes since v1:
- Change the domain.rng to correspond to the new schema
- Don't allocate caps->ns in testQemuCapsInit since it is a static table
Changes since v2:
- Change domain.rng to add restrictions on allowed environment names
Changes since v3:
- Remove a bogus comment in the tests
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Since we are adding a new "per-hypervisor" protocol, we
make it so that the qemu remote protocol uses a new
PROTOCOL and PROGRAM number. This allows us to easily
distinguish it from the normal REMOTE protocol.
This necessitates changing the proc in remote_message_header
from a "remote_procedure" to an "unsigned", which should
be the same size (and thus preserve the on-wire protocol).
Changes since v1:
- Fixed up a couple of script problems in remote_generate_stubs.pl
- Switch an int flag to a bool in dispatch.c
Changes since v2:
- None
Changes since v3:
- Change unsigned proc to signed proc, to conform to spec
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Implement the qemu driver's virDomainQemuMonitorCommand
and hook it into the API entry point.
Changes since v1:
- Rename the (external) qemuMonitorCommand to qemuDomainMonitorCommand
- Add virCheckFlags to qemuDomainMonitorCommand
Changes since v2:
- Drop ATTRIBUTE_UNUSED from the flags
Changes since v3:
- Add a flag to priv so we only print out monitor command warning once. Note
that this has not been plumbed into qemuDomainObjPrivateXMLFormat or
qemuDomainObjPrivateXMLParse, which means that if you run a monitor command,
restart libvirtd, and then run another monitor command, you may get an
an erroneous VIR_INFO. It's a pretty minor matter, and I didn't think it
warranted the additional code.
- Add BeginJob/EndJob calls around EnterMonitor/ExitMonitor
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Add the library entry point for the new virDomainQemuMonitorCommand()
entry point. Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.
Changes since v1:
- Go back to using the virDriver table for qemuDomainMonitorCommand, due to
linking issues
- Added versioning information to the libvirt-qemu.so
Changes since v2:
- None
Changes since v3:
- Add LGPL header to libvirt-qemu.c
- Make virLibConnError and virLibDomainError macros instead of function calls
Changes since v4:
- Move exported symbols to libvirt_qemu.syms
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Now that we have the ability to specify arbitrary qemu
command-line parameters in the XML, use it to handle unknown
command-line parameters when doing a native-to-xml conversion.
Changes since v1:
- Rename num_extra to num_args
- Fix up a memory leak on an error path
Changes since v2:
- Add a VIR_WARN when adding the argument via qemu:arg
Changes since v3:
- None
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Implement the qemu hooks for XML namespace data. This
allows us to specify a qemu XML namespace, and then
specify:
<qemu:commandline>
<qemu:arg value='arg'/>
<qemu:env name='name' value='value'/>
</qemu:commandline>
In the domain XML.
Changes since v1:
- Change the <qemu:arg>arg</qemu:arg> XML to <qemu:arg value='arg'/> XML
- Fix up some memory leaks in qemuDomainDefNamespaceParse
- Rename num_extra and extra to num_args and args, respectively
- Fixed up some error messages
- Make sure to escape user-provided data in qemuDomainDefNamespaceFormatXML
Changes since v2:
- Add checking to ensure environment variable names are valid
- Invert the logic in qemuDomainDefNamespaceFormatXML to return early
Changes since v3:
- Change strspn() to c_isalpha() check of first letter of environment variable
Signed-off-by: Chris Lalancette <clalance@redhat.com>
This patch adds namespace XML parsers to be hooked into
the main domain parser. This allows for individual hypervisor
drivers to add per-namespace XML into the main domain XML.
Changes since v1:
- Use a statically declared table for caps->ns, removing the need to
allocate/free it.
Changes since v2:
- None
Changes since v3:
- None
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The first conditional is always true which means the iterator will
never find another device on the same bus.
if (dev->domain != check->domain ||
dev->bus != check->bus ||
----> (check->slot == check->slot &&
check->function == check->function)) <-----
The goal of that check is to verify that the device is either:
in a different pci domain
on a different bus
is the same identical device
This means libvirt may issue a secondary bus reset when there are
devices
on that bus that actively in use by the host or another guest.
* src/util/pci.c: fix a bogus test in pciSharesBusWithActive()
The remote driver is using the wrong privateData field in
a couple of functions. THis is harmless for stateful
drivers like QEMU/UML/LXC, but will crash with Xen
* src/remote/remote_driver.c: Fix use of privateData field
A Linux software bridge will assume the MAC address of the enslaved
interface with the numerically lowest MAC addr. When the bridge
changes MAC address there is a period of network blackout, so a
change should be avoided. The kernel gives TAP devices a completely
random MAC address. Occassionally the random TAP device MAC is lower
than that of the physical interface (eth0, eth1etc) that is enslaved,
causing the bridge to change its MAC.
This change sets an explicit MAC address for all TAP devices created
using the configured MAC from the XML, but with the high byte set
to 0xFE. This should ensure TAP device MACs are higher than any
physical interface MAC.
* src/qemu/qemu_conf.c, src/uml/uml_conf.c: Pass in a MAC addr
for the TAP device with high byte set to 0xFE
* src/util/bridge.c, src/util/bridge.h: Set a MAC when creating
the TAP device to override random MAC
The PCI slot 1 must be reserved at all times, since PIIX3 is
always present, even if no IDE device is in use for guest disks
* src/qemu/qemu_conf.c: Always reserve slot 1 for PIIX3
Init process may remain after sending SIGTERM for some reason.
For example, if original init program is used, it is definitely
not killed by SIGTERM.
* src/lxc/lxc_controller.c: kill with SIGKILL if SIGTERM wasn't
sufficient
One error exit in virStorageBackendCreateBlockFrom was setting the
return value to errno. The convention for volume build functions is to
return 0 on success or -1 on failure. Not only was it not necessary to
set the return value (it defaults to -1, and is set to 0 when
everything has been successfully completed), in the case that some
caller were checking for < 0 rather than != 0, they would incorrectly
believe that it completed successfully.
virDirCreate also previously returned 0 on success and errno on
failure. This makes it fit the recommended convention of returning 0
on success, -errno (ie a negative number) on failure.
Previously virStorageBackendCopyToFD would simply return -1 on
error. This made the error return from one of its callers inconsistent
(createRawFileOpHook is supposed to return -errno, but if
virStorageBackendCopyToFD failed, createRawFileOpHook would just
return -1). Since there is a useful errno in every case of error
return from virStorageBackendCopyToFD, and since the other uses of
that function ignore the return code (beyond simply checking to see if
it is < 0), this is a safe change.
virFileOperation previously returned 0 on success, or the value of
errno on failure. Although there are other functions in libvirt that
use this convention, the preferred (and more common) convention is to
return 0 on success and -errno (or simply -1 in some cases) on
failure. This way the check for failure is always (ret < 0).
* src/util/util.c - change virFileOperation and virFileOperationNoFork to
return -errno on failure.
* src/storage/storage_backend.c, src/qemu/qemu_driver.c
- change the hook functions passed to virFileOperation to return
-errno on failure.
To try and ensure that people upgrading from old QEMU get guests
with the same PCI device ordering, change the way we assign addrs
to match QEMU's default order. This should make Windows less
annoyed.
* src/qemu/qemu_conf.c: Follow QEMU's default PCI ordering
logic when assigning addresses
* tests/*.args: Update for changed PCI addresses
To allow compatibility with older QEMU PCI device slot assignment
it is necessary to explicitly track the balloon device in the
XML. This introduces a new device
<memballoon model='virtio|xen'/>
It can also have a PCI address, auto-assigned if necessary.
The memballoon will be automatically added to all Xen and QEMU
guests by default.
* docs/schemas/domain.rng: Add <memballoon> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
and formatting for memballoon device. Always add a memory
balloon device to Xen/QEMU if none exists in XML
* src/libvirt_private.syms: Export memballoon model APIs
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
PCI device address in memory balloon device
* tests/*: Update to test new functionality
The first VGA and IDE devices need to have fixed PCI address
reservations. Currently this is handled inline with the other
non-primary VGA/IDE devices. The fixed virtio balloon device
at slot 3, ensures auto-assignment skips the slots 1/2. The
virtio address will shortly become configurable though. This
means the reservation of fixed slots needs to be done upfront
to ensure that they don't get re-used for other devices.
This is more or less reverting the previous changeset:
commit 83acdeaf17
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Feb 3 16:11:29 2010 +0000
Fix restore of QEMU guests with PCI device reservation
The difference is that this time, instead of unconditionally
reserving the address, we only reserve the address if it was
initially type=none. Addresses of type=pci were handled
earlier in process by qemuDomainPCIAddressSetCreate(). This
ensures restore step doesn't have problems
* src/qemu/qemu_conf.c: Reserve first VGA + IDE address
upfront
The VIR_ERR_NO_SUPPORT refers to an API which is not implemented.
There is a separate VIR_ERR_CONFIG_UNSUPPORTED for XML config
options that are not available with the current hypervisor.
* src/qemu/qemu_conf.c, src/qemu/qemu_driver.c: Remove
many VIR_ERR_NO_SUPPORT replace with VIR_ERR_CONFIG_UNSUPPORTED
If you try to execute two concurrent migrations p2p
from A->B and B->A, the two libvirtd's will deadlock
trying to perform the migrations. The reason for this is
that in p2p migration, the libvirtd's are responsible for
making the RPC Prepare, Migrate, and Finish calls. However,
they are currently holding the driver lock while doing so,
which basically guarantees deadlock in this scenario.
This patch fixes the situation by adding
qemuDomainObjEnterRemoteWithDriver and
qemuDomainObjExitRemoteWithDriver helper methods. The Enter
take an additional object reference, then drops both the
domain object lock and the driver lock. The Exit takes
both the driver and domain object lock, then drops the
reference. Adding calls to these Enter and Exit helpers
around remote calls in the various migration methods
seems to fix the problem for me in testing.
This should make the situation safe. The additional domain
object reference ensures that the domain object won't disappear
while this operation is happening. The BeginJob that is called
inside of qemudDomainMigratePerform ensures that we can't execute a
second migrate (or shutdown, or save, etc) job while the
migration is active. Finally, the additional check on the state
of the vm after we reacquire the locks ensures that we can't
be surprised by an external event (domain crash, etc).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Originally the storage volume files were opened with O_DSYNC to make
sure they were flushed to disk immediately. It turned out that this
was extremely slow in some cases, so the O_DSYNC was removed in favor
of just calling fsync() after all the data had been written. However,
this call to fsync was inside the block that is executed to zero-fill
the end of the volume file. In cases where the new volume is copied
from an old volume, and they are the same length, this fsync would
never take place.
Now the fsync is *always* done, unless there is an error (in which
case it isn't important, and is most likely inappropriate.
A missing set of braces around an error condition caused us to skip
zero'ing out the remainder of a new volume file if the new volume was
longer than the original (the goto was supposed to be taken only in
the case of error, but was always being taken).
The storage volume lookup code was probing for the backing store
format, instead of using the format extracted from the file
itself. This meant it could report in accurate information. If
a format is included in the file, then use that in preference,
with probing as a fallback.
* src/storage/storage_backend_fs.c: Use extracted backing store
format
When creating qcow2 files with a backing store, it is important
to set an explicit format to prevent QEMU probing. The storage
backend was only doing this if it found a 'kvm-img' binary. This
is wrong because plenty of kvm-img binaries don't support an
explicit format, and plenty of 'qemu-img' binaries do support
a format. The result was that most qcow2 files were not getting
a backing store format.
This patch runs 'qemu-img -h' to check for the two support
argument formats
'-o backing_format=raw'
'-F raw'
and use whichever option it finds
* src/storage/storage_backend.c: Query binary to determine
how to set the backing store format
Record a default driver name/type in capabilities struct. Use this
when parsing disks if value is not set in XML config.
* src/conf/capabilities.h: Record default driver name/type for disks
* src/conf/domain_conf.c: Fallback to default driver name/type
when parsing disks
* src/qemu/qemu_driver.c: Set default driver name/type to raw
Disk format probing is now disabled by default. A new config
option in /etc/qemu/qemu.conf will re-enable it for existing
deployments where this causes trouble
The implementation of security driver callbacks often needs
to access the security driver object. Currently only a handful
of callbacks include the driver object as a parameter. Later
patches require this is many more places.
* src/qemu/qemu_driver.c: Pass in the security driver object
to all callbacks
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_stacked.c,
src/security/security_apparmor.c, src/security/security_driver.h,
src/security/security_selinux.c: Add a virSecurityDriverPtr
param to all security callbacks
Update the QEMU cgroups code, QEMU DAC security driver, SELinux
and AppArmour security drivers over to use the shared helper API
virDomainDiskDefForeachPath().
* src/qemu/qemu_driver.c, src/qemu/qemu_security_dac.c,
src/security/security_selinux.c, src/security/virt-aa-helper.c:
Convert over to use virDomainDiskDefForeachPath()
There is duplicated code which iterates over disk backing stores
performing some action. Provide a convenient helper for doing
this to eliminate duplication & risk of mistakes with disk format
probing
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDiskDefForeachPath()
Require the disk image to be passed into virStorageFileGetMetadata.
If this is set to VIR_STORAGE_FILE_AUTO, then the format will be
resolved using probing. This makes it easier to control when
probing will be used
* src/qemu/qemu_driver.c, src/qemu/qemu_security_dac.c,
src/security/security_selinux.c, src/security/virt-aa-helper.c:
Set VIR_STORAGE_FILE_AUTO when calling virStorageFileGetMetadata.
* src/storage/storage_backend_fs.c: Probe for disk format before
calling virStorageFileGetMetadata.
* src/util/storage_file.h, src/util/storage_file.c: Remove format
from virStorageFileMeta struct & require it to be passed into
method.
The virStorageFileGetMetadataFromFD did two jobs in one. First
it probed for storage type, then it extracted metadata for the
type. It is desirable to be able to separate these jobs, allowing
probing without querying metadata, and querying metadata without
probing.
To prepare for this, split out probing code into a new pair of
methods
virStorageFileProbeFormatFromFD
virStorageFileProbeFormat
* src/util/storage_file.c, src/util/storage_file.h,
src/libvirt_private.syms: Introduce virStorageFileProbeFormat
and virStorageFileProbeFormatFromFD
Instead of including a field in FileTypeInfo struct for the
disk format, rely on the array index matching the format.
Use verify() to assert the correct number of elements in the
array.
* src/util/storage_file.c: remove type field from FileTypeInfo
When QEMU opens a backing store for a QCow2 file, it will
normally auto-probe for the format of the backing store,
rather than assuming it has the same format as the referencing
file. There is a QCow2 extension that allows an explicit format
for the backing store to be embedded in the referencing file.
This closes the auto-probing security hole in QEMU.
This backing store format can be useful for libvirt users
of virStorageFileGetMetadata, so extract this data and report
it.
QEMU does not require disk image backing store files to be in
the same format the file linkee. It will auto-probe the disk
format for the backing store when opening it. If the backing
store was intended to be a raw file this could be a security
hole, because a guest may have written data into its disk that
then makes the backing store look like a qcow2 file. If it can
trick QEMU into thinking the raw file is a qcow2 file, it can
access arbitrary files on the host by adding further backing
store links.
To address this, callers of virStorageFileGetMeta need to be
told of the backing store format. If no format is declared,
they can make a decision whether to allow format probing or
not.
IPtables will seek to preserve the source port unchanged when
doing masquerading, if possible. NFS has a pseudo-security
option where it checks for the source port <= 1023 before
allowing a mount request. If an admin has used this to make the
host OS trusted for mounts, the default iptables behaviour will
potentially allow NAT'd guests access too. This needs to be
stopped.
With this change, the iptables -t nat -L -n -v rules for the
default network will be
Chain POSTROUTING (policy ACCEPT 95 packets, 9163 bytes)
pkts bytes target prot opt in out source destination
14 840 MASQUERADE tcp -- * * 192.168.122.0/24 !192.168.122.0/24 masq ports: 1024-65535
75 5752 MASQUERADE udp -- * * 192.168.122.0/24 !192.168.122.0/24 masq ports: 1024-65535
0 0 MASQUERADE all -- * * 192.168.122.0/24 !192.168.122.0/24
* src/network/bridge_driver.c: Add masquerade rules for TCP
and UDP protocols
* src/util/iptables.c, src/util/iptables.c: Add source port
mappings for TCP & UDP protocols when masquerading.
There are many naming conventions for partitions associated with a
block device. Some of the major ones are:
/dev/foo -> /dev/foo1
/dev/foo1 -> /dev/foo1p1
/dev/mapper/foo -> /dev/mapper/foop1
/dev/disk/by-path/foo -> /dev/disk/by-path/foo-part1
The universe of possible conventions isn't clear. Rather than trying
to understand all possible conventions, this patch divides devices
into two groups, device mapper devices and everything else. Device
mapper devices seem always to follow the convention of device ->
devicep1; everything else is canonicalized.
* src/uml/uml_driver.c (umlMonitorCommand): Correct flaw that would
cause unconditional "incomplete reply ..." failure, since "nbytes"
was always 0 or 1.
* src/qemu/qemu_driver.c (qemuConnectMonitor): Correct erroneous
parenthesization in two expressions. Without this fix, failure
to set or clear SELinux security context in the monitor would go
undiagnosed. Also correct a diagnostic and split some long lines.
When comparing a CPU without <model> element, such as
<cpu>
<topology sockets='1' cores='1' threads='1'/>
</cpu>
libvirt would happily crash without warning.
When autodetecting whether XML describes guest or host CPU, the presence
of <arch> element is checked. If it's present, we treat the XML as host
CPU definition. Which is right, since guest CPU definitions do not
contain <arch> element. However, if at the same time the root <cpu>
element contains `match' attribute, we would silently ignore it and
still treat the XML as host CPU. We should rather refuse such invalid
XML.
When a CPU to be compared with host CPU describes a host CPU instead of
a guest CPU, the result is incorrect. This is because instead of
treating additional features in host CPU description as required, they
were treated as if they were mentioned with all possible policies at the
same time.
In case qemu supports -nodefconfig, libvirt adds uses it when launching
new guests. Since this option may affect CPU models supported by qemu,
we need to use it when probing for available models.
An indentation mistake meant that a check for return status
was not properly performed in all cases. This could result
in a crash on NULL pointer in a following line.
* src/qemu/qemu_monitor_json.c: Fix check for return status
when processing JSON for blockstats
By specifying <vendor> element in CPU requirements a guest can be
restricted to run only on CPUs by a given vendor. Host CPU vendor is
also specified in capabilities XML.
The vendor is checked when migrating a guest but it's not forced, i.e.,
guests configured without <vendor> element can be freely migrated.
All features in the baseline CPU definition were always created with
policy='require' even though an arch driver returned them with different
policy settings.
This allows the user to give an explicit path to configure
./configure --with-vbox=/path/to/virtualbox
instead of having the VirtualBox driver probe a set of possible
paths at runtime. If no explicit path is specified then configure
probes the set of "known" paths.
https://bugzilla.redhat.com/show_bug.cgi?id=609185
We only use libpciaccess for resolving device product/vendor. If
initializing the library fails (say if using qemu:///session), don't
warn so loudly, and carry on as usual.
Any error message raised after the process has forked needs
to be followed by virDispatchError, otherwise we have no chance of
ever seeing it. This was selectively done for hook functions in the past,
but really applies to all post-fork errors.
As pointed out by Eric Blake, using dirent->d_type breaks
compilation on MinGW. This patch addresses this by using
'#if defined' as same as doing for virCgroupForDriver.
Some, but not all, codepaths in the qemuMonitorOpen() method
would trigger the destroy callback. The caller does not expect
this to be invoked if construction fails, only during normal
release of the monitor. This resulted in a possible double-unref
of the virDomainObjPtr, because the caller explicitly unrefs
the virDomainObjPtr if qemuMonitorOpen() fails
* src/qemu/qemu_monitor.c: Don't invoke destroy callback from
qemuMonitorOpen() failure paths
ENOENT happens normally when a subsystem is enabled with any other
subsystems and the directory of the target group has already removed
in a prior loop. In that case, the function should just return without
leaving an error message.
NB this is the same behavior as before introducing virCgroupRemoveRecursively.
Make sure to *not* call qemuDomainPCIAddressReleaseAddr if
QEMUD_CMD_FLAG_DEVICE is *not* set (for older qemu). This
prevents a crash when trying to do device detachment from
a qemu guest.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
In the current libvirt PCI code, there is no checking whether
a PCI device is in use by a guest when doing node device
detach or reattach. This causes problems when a device is
assigned to a guest, and the administrator starts issuing
nodedevice commands. Make it so that we check the list
of active devices when trying to detach/reattach, and only
allow the operation if the device is not assigned to a guest.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Fix regression introduced in commit a4a287242 - basically, the
phyp storage driver should only accept the same URIs that the
main phyp driver is willing to accept. Blindly accepting all
URIs meant that the phyp storage driver was being consulted for
'virsh -c qemu:///session pool-list --all', rather than the
qemu storage driver, then since the URI was not for phyp, attempts
to then use the phyp driver crashed because it was not initialized.
* src/phyp/phyp_driver.c (phypStorageOpen): Only accept connections
already open to a phyp driver.
This code was just recently added (by me) and didn't account for the
fact that stdin_path is sometimes NULL. If it's NULL, and
SetSecurityAllLabel fails, a segfault would result.
Because tty path is unexpectedly not saved in the live configuration
file of a domain, libvirtd cannot get the console of the domain back
after restarting.
The reason why the tty path isn't saved is that, to save the tty path,
the save function, virDomainSaveConfig, requires that the target domain
is running (pid != -1), however, lxc driver calls the function before
starting the domain to pass the configuration to controller.
To ensure to save the tty path, the patch lets lxc driver call the save
function again after starting the domain.
The function is expected to return negative value on failure,
however, it returns positive value when either setInterfaceName
or vethInterfaceUpOrDown fails. Because the function returns
the return value of either as is, however, the two functions
may return positive value on failure.
The patch fixes the defects and add error messages.
When the saved domain image is on an NFS share, at least some part of
domainSetSecurityAllLabel will fail (for example, selinux labels can't
be modified). To allow domain restore to still work in this case, just
ignore the errors.
virStorageFileIsSharedFS would previously only work if the entire path
in question was stat'able by the uid of the libvirtd process. This
patch changes it to crawl backwards up the path retrying the statfs
call until it gets to a partial path that *can* be stat'ed.
This is necessary to use the function to learn the fstype for files
stored as a different user (and readable only by that user) on a
root-squashed remote filesystem.
Also restore the label to its original value after qemu is finished
with the file.
Prior to this patch, qemu domain restore did not function properly if
selinux was set to enforce.
If an active migration operation fails, or is cancelled by the
admin, the QEMU on the destination is shutdown and the one on
the source continues running. It is important in shutting down
the QEMU on the destination, the security drivers don't reset
the file labelling/permissions.
* src/qemu/qemu_driver.c: Don't reset labelling/permissions
on migration abort
Minor speedups by using the full power of sed.
* src/phyp/phyp_driver.c (phypGetVIOSFreeSCSIAdapter)
(phypDiskType, phypListDefinedDomains): Use fewer processes, by
folding other work into sed.
(phypGetVIOSPartitionID): Likewise. Also avoid non-portable use
of 'sed -s'.
Add the storage management driver to the Power Hypervisor driver.
This is a big but simple patch, it's just a new set of functions.
This patch includes:
* Storage driver: The set of pool-* and vol-* functions.
* attach-disk function.
* Support for IVM on the new functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
* src/phyp/phyp_driver.c (phypStorageDriver): New driver.
(phypStorageOpen, phypStorageClose): New functions.
(phypRegister): Register it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Several phyp functions are not namespace clean, and had no reason
to be exported since no one outside the phyp driver needed to use
them. Rather than do lots of forward declarations, I was able
to topologically sort the file. So, this patch looks huge, but
is really just a matter of marking things static and dealing with
the compiler fallout.
* src/phyp/phyp_driver.h (PHYP_DRIVER_H): Add include guard.
(phypCheckSPFreeSapce): Delete unused declaration.
(phypGetSystemType, phypGetVIOSPartitionID, phypCapsInit)
(phypBuildLpar, phypUUIDTable_WriteFile, phypUUIDTable_ReadFile)
(phypUUIDTable_AddLpar, phypUUIDTable_RemLpar, phypUUIDTable_Pull)
(phypUUIDTable_Push, phypUUIDTable_Init, phypUUIDTable_Free)
(escape_specialcharacters, waitsocket, phypGetLparUUID)
(phypGetLparMem, phypGetLparCPU, phypGetLparCPUGeneric)
(phypGetRemoteSlot, phypGetBackingDevice, phypDiskType)
(openSSHSession): Move declarations to phyp_driver.c and make static.
* src/phyp/phyp_driver.c: Rearrange file contents to provide
topological sorting of newly-static funtions (no semantic changes
other than reduced scope).
(phypGetBackingDevice, phypDiskType): Mark unused, for now.
The patches for shared storage migration were not correctly written
for json mode. Thus the 'blk' and 'inc' parameters were never being
set. In addition they didn't set the QEMU_MONITOR_MIGRATE_BACKGROUND
so migration was synchronous. Due to multiple bugs in QEMU's JSON
impl this wasn't noticed because it treated the sync migration requst
as asynchronous anyway. Finally 'background' parameter was converted
to take arbitrary flags but not renamed, and not all uses were changed
to unsigned int.
* src/qemu/qemu_driver.c: Set QEMU_MONITOR_MIGRATE_BACKGROUND in
doNativeMigrate
* src/qemu/qemu_monitor_json.c: Process QEMU_MONITOR_MIGRATE_NON_SHARED_DISK
and QEMU_MONITOR_MIGRATE_NON_SHARED_INC flags
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.h, src/qemu/qemu_monitor_text.c,
src/qemu/qemu_monitor_text.h: change 'int background' to
'unsigned int flags' in migration APIs. Add logging of flags
parameter
During incoming migration the QEMU monitor is not able to be
used. The incoming migration code did not keep hold of the
job lock because migration is split across multiple API calls.
This meant that further monitor commands on the guest would
hang until migration finished with no timeout.
In this change the qemuDomainMigratePrepare method sets the
job flag just before it returns. The qemuDomainMigrateFinish
method checks for this job flag & clears it once done. This
prevents any use of the monitor between prepare+finish steps.
The qemuDomainGetJobInfo method is also updated to refresh
the job elapsed time. This means that virsh domjobinfo can
return time data during incoming migration
* src/qemu/qemu_driver.c: Keep a job active during incoming
migration. Refresh job elapsed time when returning job info
When configuring serial, parallel, console or channel devices
with a file, dev or pipe backend type, it is necessary to label
the file path in the security drivers. For char devices of type
file, it is neccessary to pre-create (touch) the file if it does
not already exist since QEMU won't be allowed todo so itself.
dev/pipe configs already require the admin to pre-create before
starting the guest.
* src/qemu/qemu_security_dac.c: set file ownership for character
devices
* src/security/security_selinux.c: Set file labeling for character
devices
* src/qemu/qemu_driver.c: Add character devices to cgroup ACL
The parallel, serial, console and channel devices are all just
character devices. A lot of code needs todo the same thing to
all these devices. This provides an convenient API for iterating
over all of them.
* src/conf/domain_conf.c, src/conf/domain_conf.c,
src/libvirt_private.syms: Add virDomainChrDefForeach
We previously assumed that if the -device option existed in qemu, that
-nodefconfig would also exist. It turns out that isn't the case, as
demonstrated by qemu-kvm-0.12.3 in Fedora 13.
*/src/qemu/qemu_conf.[hc] - add a new QEMUD_CMD_FLAG, set it via the
help output, and check it before adding
-nodefconfig to the qemu commandline.
Also don't abuse the disk driver name to specify the SCSI controller
model anymore:
<driver name='buslogic'/>
Use the newly added model attribute of the controller element for this:
<controller type='scsi' index='0' model='buslogic'/>
The disk driver name approach is deprecated now, but still works for
backward compatibility reasons.
Update the documentation and tests accordingly.
Fix usage of the words controller and id in the VMX handling code. Use
controller, bus and unit properly.
The domain XML parsing code autogenerates disk address and
controller elements when they are not explicitly specified.
The code assumes a narrow SCSI bus (7 units per bus). ESX
uses a wide SCSI bus (16 units per bus).
This is a step towards controller support for the ESX driver.
Move libnl to libvirt_util.la, because macvtap.c requires it.
Add GnuTLS to libvirt_driver.la, because libvirt.c calls gcrypt functions.
When built without loadable driver modules, then the remote driver pulls
in GnuTLS.
Move libgnu.la from libvirt_parthelper_CFLAGS to libvirt_parthelper_LDADD.
Through conversation with Kumar L Srikanth-B22348, I found
that the function of getting memory usage (e.g., virsh dominfo)
doesn't work for lxc with ns subsystem of cgroup enabled.
This is because of features of ns and memory subsystems.
Ns creates child cgroup on every process fork and as a result
processes in a container are not assigned in a cgroup for
domain (e.g., libvirt/lxc/test1/). For example, libvirt_lxc
and init (or somewhat specified in XML) are assigned into
libvirt/lxc/test1/8839/ and libvirt/lxc/test1/8839/8849/,
respectively. On the other hand, memory subsystem accounts
memory usage within a group of processes by default, i.e.,
it does not take any child (and descendant) groups into
account. With the two features, virsh dominfo which just
checks memory usage of a cgroup for domain always returns
zero because the cgroup has no process.
Setting memory.use_hierarchy of a group allows to account
(and limit) memory usage of every descendant groups of the group.
By setting it of a cgroup for domain, we can get proper memory
usage of lxc with ns subsystem enabled. (To be exact, the
setting is required only when memory and ns subsystems are
enabled at the same time, e.g., mount -t cgroup none /cgroup.)
As same as normal directories, a cgroup cannot be removed if it
contains sub groups. This patch changes virCgroupRemove to remove
all descendant groups (subdirectories) of a target group before
removing the target group.
The handling is required when we run lxc with ns subsystem of cgroup.
Ns subsystem automatically creates child cgroups on every process
forks, but unfortunately the groups are not removed on process exits,
so we have to remove them by ourselves.
With this patch, such child (and descendant) groups are surely removed
at lxc shutdown, i.e., lxcVmCleanup which calls virCgroupRemove.
add iptables rules to allow TFTP from the virtual network if <tftp>
element is defined in the network definition.
Fedora bz#580215
* src/network/bridge_driver.c: open UDP port 69 for TFTP traffic if
tftproot is defined
We already use the '-nodefaults' command line arg with QEMU to stop
it adding any default devices to guests. Unfortunately, QEMU will
load global config files from /etc/qemu that may also add default
devices. These aren't blocked by '-nodefaults', so we need to also
add the '-nodefconfig' arg to prevent that.
Unfortunately these global config files are also used to define
custom CPU models. So in blocking global hardware device addition
we also block definitions of new CPU models. Libvirt doesn't know
about these custom CPU models though, so it would never make use
of them anyway. Thus blocking them via -nodefconfig isn't a show
stopping problem. We would need to expand libvirt's own CPU model
XML database to support these instead.
* src/qemu/qemu_conf.c: Add '-nodefconfig' if available
* tests/qemuxml2argvdata/: Add '-nodefconfig' to all data files which
have '-nodefaults' present
The current code pattern requires that callers of qemuMonitorClose
check for the return value == 0, and if so, set priv->mon = NULL
and release the reference held on the associated virDomainObjPtr
The change d84bb6d6a3 violated that
requirement, meaning that priv->mon never gets set to NULL, and
a reference count is leaked on virDomainObjPtr.
This design was a bad one, so remove the need to check the return
valueof qemuMonitorClose(). Instead allow registration of a
callback that's invoked just when the last reference on qemuMonitorPtr
is released.
Finally there was a potential reference leak in qemuConnectMonitor
in the failure path.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a destroy
callback invoked from qemuMonitorFree
* src/qemu/qemu_driver.c: Use the destroy callback to release the
reference on virDomainObjPtr when the monitor is freed. Fix other
potential reference count leak in connecting to monitor
Before issuing monitor commands it is neccessary to check whether
the guest is still running. Most places use virDomainIsActive()
correctly, but a few relied on 'priv->mon != NULL'. In theory
these should be equivalent, but the release of the last reference
count on priv->mon can be delayed a small amount of time until
the event handler is finally deregistered. A further ref counting
bug also means that priv->mon might be never released. In such a
case, code could mistakenly issue a monitor command and wait for
a response that will never arrive, effectively leaving the QEMU
driver waiting on virCondWait() forever..
To protect against these possibilities, make sure all code uses
virDomainIsActive(), not 'priv->mon != NULL'
* src/qemu/qemu_driver.c: Replace 'priv->mon != NULL' with
calls to 'priv->mon != NULL'()
If there is no driver for a URI we report
"no hypervisor driver available"
This is bad because not all virt drivers are hypervisors (ie container
based virt).
If there is no driver support for an API we report
"this function is not supported by the hypervisor"
This is bad for the same reason, and additionally because it is
also used for the network, interface & storage drivers.
* src/util/virterror.c: Improve error messages
Following Daniel Berrange's multiple helpful suggestions for improving
this patch and introducing another driver interface, I now wrote the
below patch where the nwfilter driver registers the functions to
instantiate and teardown the nwfilters with a function in
conf/domain_nwfilter.c called virDomainConfNWFilterRegister. Previous
helper functions that were called from qemu_driver.c and qemu_conf.c
were move into conf/domain_nwfilter.h with slight renaming done for
consistency. Those functions now call the function expored by
domain_nwfilter.c, which in turn call the functions of the new driver
interface, if available.
- Fix documentation for virGetStorageVol: it has 'key' argument instead
of 'uuid'.
- Remove TODO comment from virReleaseStorageVol: we use volume key as an
identifier instead of UUID.
- Print human-readable UUID string in debug message in virReleaseSecret.
Per-connection hashes for domains, networks, storage pools and network
filter pools were indexed by names which was not the best choice. UUIDs
are better identifiers, so lets use them.
If VM startup fails early enough (can't find a referenced USB device),
libvirtd will crash trying to clear the VNC port bit, since port = 0,
which overflows us out of the bitmap bounds.
Fix this by being more defensive in the bitmap operations, and only
clearing a previously set VNC port.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Followup to https://bugzilla.redhat.com/show_bug.cgi?id=599091,
commit 20206a4b, to reduce disk waste in padding.
* src/qemu/qemu_monitor.h (QEMU_MONITOR_MIGRATE_TO_FILE_BS): Drop
back to 4k.
(QEMU_MONITOR_MIGRATE_TO_FILE_TRANSFER_SIZE): New macro.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update comment.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrateToFile): Use
two invocations of dd to output non-aligned large blocks.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMigrateToFile):
Likewise.
This patch adds an optional XML attribute to a nwfilter rule to give the user control over whether the rule is supposed to be using the iptables state match or not. A rule may now look like shown in the XML below with the statematch attribute either having value '0' or 'false' (case-insensitive).
[...]
<rule action='accept' direction='in' statematch='false'>
<tcp srcmacaddr='1:2:3:4:5:6'
srcipaddr='10.1.2.3' srcipmask='32'
dscp='33'
srcportstart='20' srcportend='21'
dstportstart='100' dstportend='1111'/>
</rule>
[...]
I am also extending the nwfilter schema and add this attribute to a test case.
Use virBuffer* API to conditionally keep the portion of the command
line specific to HMC, so that IVM can work.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch works around a recent extension of the netlink driver I had made use of when building the netlink messages. Unfortunately older kernels don't accept IFLA_IFNAME + name of interface as a replacement for the interface's index, so this patch now gets the interface index ifindex if it's not provided (ifindex <= 0).
Match earlier change for qemu pause support with virDomainCreateXML.
* src/qemu/qemu_driver.c (qemudDomainObjStart): Add parameter; all
callers changed.
(qemudDomainStartWithFlags): Implement flag support.
Define the wire format for the new virDomainCreateWithFlags
API, and implement client and server side of marshaling code.
* daemon/remote.c (remoteDispatchDomainCreateWithFlags): Add
server side dispatch for virDomainCreateWithFlags.
* src/remote/remote_driver.c (remoteDomainCreateWithFlags)
(remote_driver): Client side serialization.
* src/remote/remote_protocol.x
(remote_domain_create_with_flags_args)
(remote_domain_create_with_flags_ret)
(REMOTE_PROC_DOMAIN_CREATE_WITH_FLAGS): Define wire format.
* daemon/remote_dispatch_args.h: Regenerate.
* daemon/remote_dispatch_prototypes.h: Likewise.
* daemon/remote_dispatch_table.h: Likewise.
* src/remote/remote_protocol.c: Likewise.
* src/remote/remote_protocol.h: Likewise.
* src/remote_protocol-structs: Likewise.
Daniel's patch works with gcc and CFLAGS containing -O (the
autoconf default), but fails with non-gcc or with other
CFLAGS (such as -g), since c-ctype.h declares c_isdigit as
a macro only for certain compilation settings.
* src/Makefile.am (libvirt_parthelper_LDFLAGS): Add gnulib
library, for when c_isdigit is not a macro.
* src/storage/parthelper.c (main): Avoid out-of-bounds
dereference, noticed by Jim Meyering.
Disks with a trailing digit in their path (eg /dev/loop0 or
/dev/dm0) have an extra 'p' appended before the partition
number (eg, to form /dev/loop0p1 not /dev/loop01). Fix the
partition lookup to append this extra 'p' when required
* src/storage/parthelper.c: Add a 'p' before partition
number if required
Otherwise, a malicious packet could cause a DoS via spurious
out-of-memory failure.
* src/uml/uml_driver.c (umlMonitorCommand): Validate that incoming
data is reliable before using it to allocate/dereference memory.
Don't report bogus errno on short read.
Reported by Jim Meyering.
* src/util/threads.c (includes) [WIN32]: On mingw, favor native
threading over pthreads-win32 library.
* src/util/thread.h [WIN32] Likewise.
Suggested by Daniel P. Berrange.
When a disk is on a root squashed NFS server, it may not be
possible to stat() the disk file in virCgroupAllowDevice.
The virStorageFileGetMeta method may also fail to extract
the parent backing store. Both of these errors have to be
ignored to avoid breaking NFS deployments
* src/qemu/qemu_driver.c: Ignore errors in cgroup setup to
keep root squash NFS happy
https://bugzilla.redhat.com/show_bug.cgi?id=589465
Some guests (eg with badly configured grub, or Windows' installation cd)
require quick response from the console user. That's why we have a
"launchPaused" option in vdsm.
To implement it via libvirt, we need to ask libvirt not to call
qemuMonitorStartCPUs() after starting qemu. Calling virDomainStop
immediately after the domain is up is inherently raceful.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Add new parameter;
all callers adjusted.
(qemudDomainCreate): Implement support for new flag.
* This patch is a modification of a patch submitted by Nigel Jones.
It fixes several memory leaks on device addition/removal:
1. Free the virNodeDeviceDefPtr in udevAddOneDevice if the return
value is non-zero
2. Always release the node device reference after the device has been
processed.
* Refactored for better readability per the suggestion of clalance
A look at the QEMU source revealed the missing bits of info about
the VPC file format, so we can enable this now
* src/util/storage_file.c: Enable VPC format, providing version
and disk size offset fields
When an attempt to hotplug a PCI device to a guest fails,
the device was left attached to pci-stub. It is neccessary
to reset the device and then attach it to the host driver
again.
* src/qemu/qemu_driver.c: Reattach PCI device to host if
hotadd fails
The restore code is done in places where errors cannot be
raised, since they will overwrite over pre-existing errors.
* src/security/security_selinux.c: Only warn about failures
in label restore, don't report errors
Any output at all from device_add indicates an error in the
command execution. Thus it needs to check for reply != ""
* src/qemu/qemu_monitor_text.c: Fix reply check for errors
to treat any output as an error
HAL is deprecated and UDEV is the future. Thus if both
options are compiled, we should prefer use of UDEV over
HAL
* src/node_device/node_device_driver.c: Switch init
order to try UDEV first, then HAL
When SELinux is running in MLS mode, libvirtd will have a
different security level to the VMs. For libvirtd to be
able to connect to the monitor console, the client end of
the UNIX domain socket needs a different label. This adds
infrastructure to set the socket label via the security
driver framework
* src/qemu/qemu_driver.c: Call out to socket label APIs in
security driver
* src/qemu/qemu_security_stacked.c: Wire up socket label
drivers
* src/security/security_driver.h: Define security driver
entry points for socket labelling
* src/security/security_selinux.c: Set socket label based on
VM label
The network driver is not doing correct checking for
duplicate UUID/name values. This introduces a new method
virNetworkObjIsDuplicate, based on the previously
written virDomainObjIsDuplicate.
* src/conf/network_conf.c, src/conf/network_conf.c,
src/libvirt_private.syms: Add virNetworkObjIsDuplicate,
* src/network/bridge_driver.c: Call virNetworkObjIsDuplicate
for checking uniqueness of uuid/names
The storage pool driver is mistakenly using the error code
VIR_ERR_INVALID_STORAGE_POOL which is for diagnosing invalid
pointers. This patch switches it to use VIR_ERR_NO_STORAGE_POOL
which is the correct code for cases where the storage pool does
not exist
* src/storage/storage_driver.c: Replace VIR_ERR_INVALID_STORAGE_POOL
with VIR_ERR_NO_STORAGE_POOL
The storage pool driver is not doing correct checking for
duplicate UUID/name values. This introduces a new method
virStoragePoolObjIsDuplicate, based on the previously
written virDomainObjIsDuplicate.
* src/conf/storage_conf.c, src/conf/storage_conf.c,
src/libvirt_private.syms: Add virStoragePoolObjIsDuplicate,
* src/storage/storage_driver.c: Call virStoragePoolObjIsDuplicate
for checking uniqueness of uuid/names
The domain parsing code would auto-add a virtio serial controller
if it saw any virtio serial channel defined. Unfortunately it
always added a controller with index=0, even if the channel address
specified an index != 0. It only added one controller, even if
multiple controllers were referenced by channels. Finally, it let
the ports+vectors parameters initialize to zero instead of -1, which
prevented the controllers accepting any ports.
* src/conf/domain_conf.c: Initialize ports+vectors when adding
virtio serial controllers. Add all neccessary virtio serial
controllers, instead of hardcoding controller 0
* qemuxml2argvdata/qemuxml2argv-channel-virtio.args,
qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: Expand to
test controller auto-add behaviour
To ensure that the device addressing scheme is stable across
hotplug/unplug, all virtio serial channels needs to have an
associated port number in their address. This is then specified
to QEMU using the nr=NNN parameter
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parsing
for port number in vioserial address types.
* src/qemu/qemu_conf.c: Set 'nr=NNN' parameter with virtio
serial port number
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args,
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: Expand
data set to ensure coverage of port addressing
QEMU upstream decided against adding a 'reason' field to
the block IO event in QMP. Disable this code to remove a
annoying warning message. It will be renabled when the
error string reason is re-introduced in QEMU
Adjust args to qemudStartVMDaemon() to also specify path to stdin_fd,
so this can be passed to the AppArmor driver via SetSecurityAllLabel().
This updates all calls to qemudStartVMDaemon() as well as setting up
the non-AppArmor security driver *SetSecurityAllLabel() declarations
for the above. This is required for the following
"apparmor-fix-save-restore" patch since AppArmor resolves the passed
file descriptor to the pathname given to open().
See https://bugzilla.redhat.com/show_bug.cgi?id=599091
Saving a paused 512MB domain took 3m47s with the old block size of 512
bytes. Changing the block size to 1024*1024 decreased the time to 56
seconds. (Doubling again to 2048*1024 yielded 0 improvement; lowering
to 512k increased the save time to 1m10s, about 20%)
The pointer to the xml describing the domain is saved into an object
prior to calling VIR_REALLOC_N() to make the size of the memory it
points to a multiple of QEMU_MONITOR_MIGRATE_TO_FILE_BS. If that
operation needs to allocate new memory, the pointer that was saved is
no longer valid.
To avoid this situation, adjust the size *before* saving the pointer.
(This showed up when experimenting with very large values of
QEMU_MONITOR_MIGRATE_TO_FILE_BS).
Fixes for issues in commit 211dd1e9 noted by by Jim Meyering.
1. Allocate content buffer of size content_length + 1 to ensure
NUL-termination.
2. Limit content buffer size to 64k
3. Fix whitespace issue
V2:
- Add comment to clarify allocation of content buffer
- Add ATTRIBUTE_NONNULL where appropriate
- User NULLSTR macro
There are cases when a response from xend can exceed 4096 bytes, in
which case anything beyond 4096 is ignored. This patch changes the
current fixed-size, stack-allocated buffer to a dynamically allocated
buffer based on Content-Length in HTTP header.
* It appears that the udev event for HBA creation arrives before the
associated sysfs data is fully populated, resulting in bogus data
for the nodedev entry until the entry is refreshed. This problem is
particularly troublesome when creating NPIV vHBAs because it results
in libvirt failing to find the newly created adapter and waiting for
the full timeout period before erroneously failing the create
operation. This patch forces an update before any attempt to use
any scsi_host nodedev entry.
This patch that adds support for configuring 802.1Qbg and 802.1Qbh
switches. The 802.1Qbh part has been successfully tested with real
hardware. The 802.1Qbg part has only been tested with a (dummy)
server that 'behaves' similarly to how we expect lldpad to 'behave'.
The following changes were made during the development of this patch:
- Merging Scott's v13-pre1 patch
- Fixing endptr related bug while using virStrToLong_ui() pointed out
by Jim Meyering
- Addressing Jim Meyering's comments to v11
- requiring mac address to the vpDisassociateProfileId() function to
pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched)
- determining pid of lldpad daemon by reading it from /var/run/libvirt.pid
(hardcode as is hardcode alson in lldpad sources)
- merging netlink send code for kernel target and user space target
(lldpad) using one function nlComm() to send the messages
- adding a select() after the sending and before the reading of the
netlink response in case lldpad doesn't respond and so we don't hang
- when reading the port status, in case of 802.1Qbg, no status may be
received while things are 'in progress' and only at the end a status
will be there.
- when reading the port status, use the given instanceId and vf to pick
the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS.
- never sending nor parsing IFLA_PORT_SELF type of messages in the
802.1Qbg case
- iterating over the elements in a IFLA_VF_PORTS to pick the right
IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId
(802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg)
and reading the current status in IFLA_PORT_RESPONSE.
- recycling a previous patch that adds functionality to interface.c to
- get the vlan identifier on an interface
- get the flags of an interface and some convenience function to
check whether an interface is 'up' or not (not currently used here)
- adding function to determine the root physical interface of an
interface. For example if a macvtap is linked to eth0.100, it will
find eth0. Also adding a function that finds the vlan on the 'way to
the root physical interface'
- conveying the root physical interface name and index in case of 802.1Qbg
- conveying mac address of macvlan device and vlan identifier in
IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ]
to (future) lldpad via netlink
- To enable build with --without-macvtap rename the
[dis|]associatePortProfileId functions, prepend 'vp' before their
name and make them non-static functions.
- Renaming variable multicast to nltarget_kernel and inverting
the logic
- Addressing Jim Meyering's comments; this also touches existing
code for example for correcting indentation of break statements or
simplification of switch statements.
- Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses
- 802.1Qbg part prepared for sending a RTM_SETLINK and getting
processing status back plus a subsequent RTM_GETLINK to
get IFLA_PORT_RESPONSE.
Note: This interface for 802.1Qbg may still change
- [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid
compiler
warning when latest if_link.h isn't available
- move from Stefan's 802.1Qb{g|h} XML v8 to v9
- move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh
- remove debug fprintfs
- use virGetHostUUID (thanks Stefan!)
- fix compile issue when latest if_link.h isn't available
- change poll timeout to 10s, at 1/8 intervals
- if polling times out, log msg and return -ETIMEDOUT
- Add Stefan's code for getPortProfileStatus
- Poll for up to 2 secs for port-profile status, at 1/8 sec intervals:
- if status indicates error, abort openMacvtapTap
- if status indicates success, exit polling
- if status is "in-progress" after 2 secs of polling, exit
polling loop silently, without error
My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete.
I've tested using the recent kernel updates for VF_PORT netlink msgs and
enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several
direct interfaces, each configured with a port-profile per the XML. VM-to-VM,
and VM-to-external work as expected. VM-to-VM on same host (using same NIC)
works same as VM-to-VM where VMs are on diff hosts. I'm able to change
settings on the port-profile while the VM is running to change the virtual
port behaviour. For example, adjusting a QoS setting like rate limit. All
VMs with interfaces using that port-profile immediatly see the effect of the
change to the port-profile.
I don't have a SR-IOV device to test so source dev is a non-SR-IOV device,
but most of the code paths include support for specifing the source dev and
VF index. We'll need to complete this by discovering the PF given the VF
linkdev. Once we have the PF, we'll also have the VF index. All this info-
mation is available from sysfs.
Fedora bug https://bugzilla.redhat.com/show_bug.cgi?id=598272
Some files under /sys/bus/usb/devices/ have the format 'usbX', where
X is the USB bus number. Use STRPREFIX to correctly parse the bus numbers.
If a directory pool contains pipes or sockets, a pool start can fail or hang:
https://bugzilla.redhat.com/show_bug.cgi?id=589577
We already try to avoid these special files, but only attempt after
opening the path, which is where the problems lie. Unify volume opening
into helper functions, which use the proper open() flags to avoid error,
followed by fstat to validate storage mode.
Previously, virStorageBackendUpdateVolTargetInfoFD attempted to enforce the
storage mode check, but allowed callers to detect this case and silently
continue. In practice, only the FS backend was using this feature, the rest
were treating unknown mode as an error condition. Unfortunately the InfoFD
function wasn't raising an error message here, so error reporting was
busted.
This patch adds 2 functions: virStorageBackendVolOpen, and
virStorageBackendVolOpenModeSkip. The latter retains the original opt out
semantics, the former now throws an explicit error.
This patch maintains the previous volume mode checks: allowing specific
modes for specific pool types requires a bit of surgery, since VolOpen
is called through several different helper functions.
v2: Use ATTRIBUTE_NONNULL. Drop stat check, just open with
O_NONBLOCK|O_NOCTTY.
v3: Move mode check logic back to VolOpen. Use 2 VolOpen functions with
different error semantics.
v4: Make second VolOpen function more extensible. Didn't opt to change
FS backend defaults, this can just be to fix the original bug.
v5: Prefix default flags with VIR_, use ATTRIBUTE_RETURN_CHECK
Since the macvtap device needs active tear-down and the teardown logic
is based on the interface name, it can happen that if for example 1 out
of 3 interfaces was successfully created, that during the failure path
the macvtap's target device name is used to tear down an interface that
is doesn't own (owned by another VM).
So, in this patch, the target interface name is reset so that there is
no target interface name and the interface name is always cleared after
a tear down.
* If a nodedev has a parent that we don't want to display, we should
continue walking up the udev device tree to see if any of its
earlier ancestors are devices that we display. It makes the tree
much nicer looking than having a whole lot of devices hanging off
the root node.
These files are borrowed from upstream release versions, and should
not need further edits in the context of libvirt (instead, a new
upstream vbox release would entail adding a new header file). We do
not re-generate these files as part of libvirt, nor do we want to lose
our minor edits (such as cppi cleanups).
* src/vbox/vbox_CAPI_v2_2.h: Clarify file origins.
* src/vbox/vbox_CAPI_v3_0.h: Likewise.
* src/vbox/vbox_CAPI_v3_1.h: Likewise.
* src/vbox/vbox_CAPI_v3_2.h: Likewise. Reindent with cppi.
Fedora bug https://bugzilla.redhat.com/show_bug.cgi?id=235961
If using the default virtual network, an easy way to lose guest network
connectivity is to install libvirt inside the VM. The autostarted
default network inside the guest collides with host virtual network
routing. This is a long standing issue that has caused users quite a
bit of pain and confusion.
On network startup, parse /proc/net/route and compare the requested
IP+netmask against host routing destinations: if any matches are found,
refuse to start the network.
v2: Drop sscanf, fix a comment typo, comment that function could use
libnl instead of /proc
v3: Consider route netmask. Compare binary data rather than convert to
string.
v4: Return to using sscanf, drop inet functions in favor of virSocket,
parsing safety checks. Don't make parse failures fatal, in case
expected format changes.
v5: Try and continue if we receive unexpected. Delimit parsed lines to
prevent scanning past newline
'listen' isn't a valid qemu-dm option, as reported a long time ago here:
https://bugzilla.redhat.com/show_bug.cgi?id=492958
Matches the near identical logic in qemu_conf.c
v2: When parsing sexpr, only match on ",server", rather than
full ',server,nowait'.
* Incorporated Jim's feedback (v1 & v2)
* Moved case of DEVTYPE == "wlan" up as it's definitive that we have a network interface.
* Made comment more detailed about the wired case to explain better
how it differentiates between wired network interfaces and USB
devices.
Eliminate almost all backward jumps by replacing this common pattern:
int
some_random_function(void)
{
int result = 0;
...
cleanup:
<unconditional cleanup code>
return result;
failure:
<cleanup code in case of an error>
result = -1;
goto cleanup
}
with this simpler pattern:
int
some_random_function(void)
{
int result = -1;
...
result = 0;
cleanup:
if (result < 0) {
<cleanup code in case of an error>
}
<unconditional cleanup code>
return result;
}
Add a bool success variable in functions that don't have a int result
that can be used for the new pattern.
Also remove some unnecessary memsets in error paths.
The hotplug methods still had the qemuCmdFlags variable declared
as an int, instead of unsigned long long. This caused flag checks
to be incorrect for flags > 31
* src/qemu/qemu_driver.c: Fix integer overflow in hotplug
This allows libvirt to open the PCI device sysfs config file prior
to dropping privileges so qemu can access the full config space.
Without this, a de-privileged qemu can only access the first 64
bytes of config space.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Detect support
for pci-assign.configfd option. Use this option when formatting
PCI device string if possible
* src/qemu/qemu_driver.c: Pre-open PCI sysfs config file and pass
to QEMU
We've been running into a lot of situations where
virGetHostname() is returning "localhost", where a plain
gethostname() would have returned the correct thing. This
is because virGetHostname() is *always* trying to canonicalize
the name returned from gethostname(), even when it doesn't
have to.
This patch changes virGetHostname so that if the value returned
from gethostname() is already FQDN or localhost, it returns
that string directly. If the value returned from gethostname()
is a shortened hostname, then we try to canonicalize it. If
that succeeds, we returned the canonicalized hostname. If
that fails, and/or returns "localhost", then we just return
the original string we got from gethostname() and hope for
the best.
Note that after this patch it is up to clients to check whether
"localhost" is an allowed return value. The only place
where it's currently not is in qemu migration.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The virVirtualPortProfileFormat just went below the
virVirtualPortProfileParamsParseXML function and got inside the
The attached patch moves virVirtualPortProfileFormat below the #ifndef
PROXY block.
Allows listing existing pools and requesting information about them.
Alter the esxVI_ProductVersion enum in a way that allows to check for
product type by masking.
This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().
<interface type='direct'>
<source dev='eth0.100' mode='vepa'/>
<model type='virtio'/>
<virtualport type='802.1Qbg'>
<parameters managerid='12' typeid='0x123456' typeidversion='1'
instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
</virtualport>
<filterref filter='clean-traffic'/>
</interface>
<interface type='direct'>
<source dev='eth0.100' mode='vepa'/>
<model type='virtio'/>
<virtualport type='802.1Qbh'>
<parameters profileid='my_profile'/>
</virtualport>
</interface>
I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.
Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
- removing macvtap.h's dependency on domain_conf.h by
moving the virVirtualPortProfileDef structure into macvtap.h
and not passing virtDomainNetDefPtr to any functions in
macvtap.c
- Addressed most of Chris Wright's comments:
- indicating error in case virtualport XML node cannot be parsed
properly
- parsing hex and decimal numbers using virStrToLong_ui() with
parameter '0' for base
- tgifname (target interface name) variable wasn't necessary
to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
file for subsequent patches to easier make them generally available
for export
- passing the macvtap interface name rather than the link device since
this otherwise gives funny side effects when using netlink messages
where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
we wanted to use hook scripts for the setup and so the setup doesn't fail
here.
- if instance ID UUID is not supplied it will automatically be generated
- adapted schema to make instance ID UUID optional
- added test case
- parser and XML generator have been separated into their own
functions so they can be re-used elsewhere (passthrough case
for example)
- Adapted XML parser and generator support the above shown type
(802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
necessary to use (for SR-IOV)
This patch introduces a dependency on libnl, which subsequent patches
will then use.
Changes from V1 to V2:
- added diffstats
- following changes in tree
Spurious / in a pool target path makes life difficult for apps using the
GetVolByPath, and doing other path based comparisons with pools. This
has caused a few issues for virt-manager users:
https://bugzilla.redhat.com/show_bug.cgi?id=494005https://bugzilla.redhat.com/show_bug.cgi?id=593565
Add a new util API which removes spurious /, virFileSanitizePath. Sanitize
target paths when parsing pool XML, and for paths passed to GetVolByPath.
v2: Leading // must be preserved, properly sanitize path=/, sanitize
away /./ -> /
v3: Properly handle starting ./ and ending /.
v4: Drop all '.' handling, just sanitize / for now.
Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file
* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
new host_uuid config option to test
The cgroups ACL code was only allowing the primary disk image.
It is possible to chain images together, so we need to search
for backing stores and add them to the ACL too. Since the ACL
only handles block devices, we ignore the EINVAL we get from
plain files. In addition it was missing code to teardown the
cgroup when hot-unplugging a disk
* src/qemu/qemu_driver.c: Allow backing stores in cgroup ACLs
and add missing teardown code in unplug path
Basic live migration was broken by the commit that added
non-shared block support in two ways:
1) It added a virCheckFlags() to doNativeMigrate(). Besides
the fact that typical usage of virCheckFlags() is in driver
entry points, and doNativeMigrate() is not an entry point,
it was missing important flags like VIR_MIGRATE_LIVE. Move
the virCheckFlags to the top-level qemuDomainMigratePrepare2
and friends.
2) It also added a memory leak in qemuMonitorTextMigrate()
by not freeing the memory used by virBufferContentAndReset().
This is fixed by storing the pointer in a temporary variable
and freeing it at the end.
With this patch in place, normal live migration works again.
v3: Instead of the churn for virCheckFlagsUI and UL, instead
always promote flags to an unsigned long and always use %lx
for the fprintf.
v2: Add back flags check, which required adding virCheckFlagsUI
and virCheckFlagsUL
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Currently all host audio backends are disabled if a VM is using VNC, in
favor of the QEMU VNC audio extension. Unfortunately no released VNC
client supports this extension, so users have no way of getting audio
to work if using VNC.
Add a new config option in qemu.conf which allows changing libvirt's
behavior, but keep the default intact.
v2: Fix doc typos, change name to vnc_allow_host_audio
The device path doesn't make use of guestAddr, so the memcpy corrupts
the guest info struct.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The virDomainGetBlockInfo API allows query physical block
extent and allocated block extent. These are normally the
same value unless storing a special format like qcow2
inside a block device. In this scenario we can query QEMU
to get the actual allocated extent.
Since last time:
- Return fatal error in text monitor
- Only invoke monitor command for block devices
- Fix error handling JSON code
* src/qemu/qemu_driver.c: Fill in block aloction extent when VM
is running
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
API to query the highest block extent via info blockstats
* src/lxc/lxc_driver.c (lxcSetSchedulerParameters): Ensure that
"->field" is "cpu_shares" before possibly giving a diagnostic about
a type for a "cpu_shares" value.
Also, virCgroupSetCpuShares could fail without evoking a diagnostic.
Add one.
Volume detection in the scsi backend was duplicating code already
present in storage_backend.c. Let's drop the duplicate code.
Also, change the shared function name to be less generic, and remove
some error squashing in the other call site.
We were squashing error messages in a few cases. Recode to follow common
ret = -1 convention.
v2: Handle more error squashing issues further up in MakeNewVol and
CreateVols. Use ret = -1 convention in MakeVols.
The qemu driver contains a subtle race in the logic to find next
available vnc port. Currently it iterates through all available ports
and returns the first for which bind(2) succeeds. However it is possible
that a previously issued port has not yet been bound by qemu, resulting
in the same port used for a subsequent domain.
This patch addresses the race by using a simple bitmap to "reserve" the
ports allocated by libvirt.
V2:
- Put port bitmap in struct qemud_driver
- Initialize bitmap in qemudStartup
V3:
- Check for failure of virBitmapGetBit
- Additional check for port != -1 before calling virbitmapClearBit
V4:
- Check for failure of virBitmap{Set,Clear}Bit
V2:
- Move bitmap impl to src/util/bitmap.[ch]
- Use CHAR_BIT instead of explicit '8'
- Use size_t instead of unsigned int
- Fix calculation of bitmap size in virBitmapAlloc
- Ensure bit is within range of map in the set, clear, and get
operations
- Use bool in virBitmapGetBit
- Add virBitmapFree to free-like funcs in cfg.mk
V3:
- Check for overflow in virBitmapAlloc
- Fix copy and paste bug in virBitmapAlloc
- Use size_t in prototypes
- Add ATTRIBUTE_NONNULL in prototypes where appropriate
and remove NULL check from impl
V4:
- Add ATTRIBUTE_RETURN_CHECK in prototypes where appropriate.
We shouldn't be checking validity in domain_conf, since
it can be used by multiple different hosts and hypervisors.
Remove the check completely.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
We need a common internal function for starting managed domains to be
used during autostart. This patch factors out relevant code from
qemudDomainStart into qemudDomainObjStart and makes it use the
refactored code for domain restore instead of calling qemudDomainRestore
API directly.
We need to be able to assign new def to an existing virDomainObj which
is already locked. This patch factors out the relevant code from
virDomainAssignDef into virDomainObjAssignDef.
We need to be able to restore a domain which we already locked and
started a job for it without undoing these steps. This patch factors
out internals of qemudDomainRestore into separate functions which work
for locked objects.
* src/qemu/qemu_conf.c (qemudParseHelpStr): Fix errors that made
it impossible to diagnose invalid minor and micro version number
components.
Signed-off-by: Chris Wright <chrisw@redhat.com>
The current cleanup: in StartVMDaemon path is a poor duplication.
qemuShutdownVMDaemon can handle teardown for inactive VMs, so let's use it.
v2: Remove old abort: label, only use cleanup:
* src/qemu/qemu_conf.c (QEMU_VERSION_STR_1, QEMU_VERSION_STR_2):
Define these instead of...
(QEMU_VERSION_STR): ... this. Remove definition.
(qemudParseHelpStr): Check first for the new, shorter prefix,
"QEMU emulator version", and then for the old one,
"QEMU PC emulator version" when trying to parse the version number.
Based on a patch by Chris Wright.
* src/lxc/lxc_controller.c (ignorable_epoll_accept_errno): New function.
(lxcControllerMain): Handle a failed accept carefully:
most errno values indicate legitimate failure and must be fatal.
However, ignore a special case: that in which an incoming client quits
between the poll() indicating its presence, and our accept() which
is trying to process it.
There doesn't seem to be anything specific to tap devices for this
array of file descriptors which need to stay open of the guest to use.
Rename then for others to make use of.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Chris Lalancette <clalance@redhat.com>
These files may be useful for anyone making modifications to
source files in a tarball distribution.
* src/Makefile.am (EXTRA_DIST): Add THREADS.txt.
* daemon/Makefile.am (EXTRA_DIST): Add THREADING.txt.
