* configure.in: If the test for -lreadline fails, search for a
library with termcap support. If one is found (often -lncurses),
rerun the test for -lreadline, linking also with the new library.
Author: Jim Meyering <meyering@redhat.com>
New files go into these directories:
gnulib/lib
gnulib/m4
gnulib/tests
* bootstrap: A wrapper around gnulib-tool.
* configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY
before any macro that uses AC_COMPILE_IFELSE.
(AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile.
* Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests
early enough that those tests run before any libvirt unit tests.
* m4/Makefile.am: Remove file. Not needed.
* src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la.
* src/nodeinfo.c: Include "physmem.h".
* qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h".
(MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions.
(virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate.
* tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS): Add ../gnulib/lib/libgnu.la.
* qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la.
* tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total
memory from a file.
Update expected output not to include "Memory: NNNN"
* tests/nodeinfodata/linux-nodeinfo-1.txt:
* tests/nodeinfodata/linux-nodeinfo-2.txt:
* tests/nodeinfodata/linux-nodeinfo-3.txt:
* tests/nodeinfodata/linux-nodeinfo-4.txt:
* tests/nodeinfodata/linux-nodeinfo-5.txt:
* tests/nodeinfodata/linux-nodeinfo-6.txt:
* src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that
would conflict with the one now in "config.h".
* autogen.sh: Add -I gnulib/m4.
* src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE.
Instead, include "config.h".
* qemud/qemud.c: Remove definition of _GNU_SOURCE.
* src/openvz_driver.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/remote_internal.c: Likewise.
* configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch
of gettextize-generated files go into build-aux/, rather than in
the top-level directory.
* .cvsignore: Adjust.
* build-aux/.cvsignore: New file.
Author: Jim Meyering <meyering@redhat.com>
* configure.in: curses is not actually required to build libvirt
* configure.in, src/virsh.c: Make readline optional. If not
available then virsh is built without support for command
line editing.
* python/libvir.c, python/libvir.py: Make Python aware that
the C bindings module is called cygvirtmod.dll when compiled
by CYGWIN.
* python/Makefile.am: Remove symlink libvirtmod.dll -> cygvirtmod.dll
no longer necessary because of the above.
* configure.in: Remove AM_CONDITIONAL(CYGWIN).
* configure.in: Added CYGWIN_EXTRA_LDFLAGS, CYGWIN_EXTRA_LIBADD,
CYGWIN_EXTRA_PYTHON_LIBADD, CYGWIN automake conditional.
* src/Makefile.am: Extra flags required to build DLL of libvirt
for Cygwin.
* python/Makefile.am: Extra flags and rule required to build
Python module for Cygwin.
prefix as the installed libvirt, use the same localstatedir /var
(instead of /usr/var) and sysconfdir /etc (instead of /usr/etc) to
be able to connect to the system daemon, and use the system local
options
* src/xs_internal.c: avoid error message when non-root cannot open
xenstore
* src/xend_internal.c: avoid error message when non-root cannot
directly access xend, in those 2 cases the proxy (or remote code)
should implement the access so there is no need to raise the error
there.
Daniel
* configure.in, src/internal.h, src/xml.c: <sys/syslimits.h>
is needed on Cygwin to get PATH_MAX. HOST_NAME_MAX and
IF_NAMESIZE defined if not in header files.
* src/bridge.c, src/qemu_driver.c, configure.in: Try to detect
the paths of dnsmasq and brctl at compile time. If found
then compile them in, otherwise search $PATH at runtime.
* libvirt.spec.in: BR dnsmasq and bridge-utils so we have their
paths at compile time.
* acinclude.m4, configure.in: ./configure option
--disable-stack-protector.
* src/gnutls_1_0_compat.h: Compatibility with GnuTLS 1.0.
* src/bridge.c: If no bridge ioctls, give an error at runtime.
applied patch from Shuveb Hussain to plug the developping
OpenVZ support. Disabled by default.
* src/openvz_conf.[ch] src/openvz_driver.[ch]: added new
OpenVZ driver files. Avoid a redefinition of readline().
Daniel
* configure.in, qemud/Makefile.am: Set QEMUD_PID_FILE macro
correctly (expand ${prefix} in Makefile).
* qemud/qemud.c: Add command line help.
* ChangeLog: Remove a CVS '>>>>' conflict line which had
been committed inadvertently.
proxy/libvirt_proxy.c qemud/Makefile.am qemud/conf.c qemud/conf.h
qemud/dispatch.c qemud/internal.h qemud/protocol.h
src/driver.h src/internal.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/proxy_internal.h src/qemu_internal.c
src/test.c src/virsh.c src/virterror.c src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xm_internal.c
src/xml.h src/xs_internal.c: applied patch from Richard Jones
adding virConnectGetCapabilities(), plus various small little
fixes
* docs/*: fixed the api extractor script and regenerated
Daniel
src/Makefile.am src/libvirt.c src/qemu_internal.c src/test.c
src/xen_internal.c src/xen_internal.h src/xend_internal.c
src/xm_internal.c src/xml.c src/xs_internal.c
tests/Makefile.am tests/sexpr2xmltest.c tests/xmconfigtest.c:
allow selective compilation of Xen,QEmu/KVM and test support
in or out at configure time. Also allows to compile on a system
without Xen development installed. All drivers are selected by
default.
Daniel
* libvirt.spec.in: BuildRequires: /sbin/iptables and
run configure with the --with-init-script and
--with-qemud-pid-file parameters.
* configure.in: it's --with-qemud-pid-file, not
--with-pid-file
* acinclude.m4: add LIBVIRT_COMPILE_WARNINGS, copied from
GNOME but with a few more flags we'd been using.
* configure.in: use that instead of setting CFLAGS
directly.
* proxy/Makefile.am, python/Makefile.am, qemud/Makefile.am,
src/Makefile.am, tests/Makefile.am: use $(WARN_CFLAGS)
* qemud/libvirtd.in: add init script for libvirt_qemud
* qemud/Makefile.am: install it unless we were configured
with --with-init-scripts=none
* configure.in: add --with-init-scripts to allow us
have different flavour init scripts
* qemud/qemud.c: add --pid-file and default to writing
out a PID file to /var/run/libvirt_qemud.pid in daemon
mode.
* configure.in: add --with-pid-file arg
* qemud/qemud.c, qemud/dispatch.c, qemud/internal.h
qemud/conf.c, qemud/driver.c, configure.in: add a
qemudLog() function which uses syslog() if we're in daemon
mode, doesn't output INFO/DEBUG messages unless the
verbose flag is set and doesn't output DEBUG messages
unless compiled with --enable-debug. Also, make a first
pass through fatal errors and add error messages for them.
* qemud/iptables.[ch]: add code for managing iptables
rules.
* qemud/Makefile.am: add iptables.[ch].
* qemud/qemud.c: add and remove iptables rules as
appropriate.
* qemud/conf.c: when starting a guess, add a rule
allowing it to forward packets across the networks
bridge.
* qemud/internal.h: add iptables context ptr
* configure.in: add --with-iptables-dir and
--with-iptables-prefix to allow us to put our rules
in a chain with the given prefix and save the rules
in files in the given dir so as to integrate with
the proposed "service iptables restart" solution
in:
https://bugzilla.redhat.com/227011
* configure.in: add --disable-bridge-params, check
for libsysfs and various kernel headers
* bridge.[ch]: add code for managing bridges
* qemud/Makefile.am: add bridge.[ch] and link against
libsysfs if enabled.
* qemud/conf.c: add support for bridge config.
* qemud/internal.h: add various bridging bits
* qemud/qemud.c: implement qemudStartNetworkDaemon()
and qemudShutdownNetworkDaemon().
include/libvirt/libvirt.h: preparing libvirt-0.1.9 release
* po/*.po: more updates and fix all the .po to not barf when msgfmt
tries to process them
Daniel
* configure.in include/libvirt/virterror.h src/Makefile.am
src/conf.c src/conf.h src/virterror.c src/xen_internal.c:
adding a subset of Xen config file parser, and serializer
* tests/Makefile.am tests/conftest.c tests/test_conf.sh
tests/confdata/Makefile.am tests/confdata/fc4.conf
tests/confdata/fc4.out: adding test program for config in and out
Daniel
include/libvirt/libvirt.h.in: preparing release of 0.1.4,
regenerated docs, fixed a few things
* src/proxy_internal.c src/test.c src/xend_internal.c:
a few trivial fixes
Daniel
proxy/proxy.h proxy/proxy_client.c src/internal.h src/xen_internal.c
src/xend_internal.c: started working on a proxy to access xend
for unpriviledged users to avoid opening xend HTTP service to
serve those read-only operations.
Daniel
include/libvirt/virterror.h python/generator.py python/libvir.c
python/libvirt_wrap.h src/driver.h src/internal.h src/test.h
src/virsh.c src/virterror.c src/xend_internal.c src/xend_internal.h
src/xml.c src/xml.h: moved the includes from include/ to
include/libvirt to reflect the installed include tree. This
avoid using "" in the includes themselves.
Daniel
* include/libvirt.h* src/libvirt.c src/xend_internal.[ch]
src/xml.[ch]: added XML parsing for Xen domain descriptions
needed for creates, plugged in a converter to s-exp and
xend call. Modified the virDomainCreateLinux() to reflect
that XML based description. Seems to work.
* python/tests/create.py: added a test case which seems to work
not tested much yet
* docs/*: regenerated
Daniel
version for python bindings, heavilly based on libxml2/libxslt
way of doing things, maybe this need to be revisited. Added packaging
too.
* src/hash.h: fixed the Copyright notice.
Daniel
include/Makefile.am: provide/fix library versionning information
include/libvir.h is now generated !
* include/libvir.h.in src/libvir.c: revamp APIs and implement
complete ones.
* src/virsh.c: finish the version command and a bit of cleanup.
Daniel
