There is no need to bother with cgroup tearing down for absent
PCI devices, given that their entries in the sysfs are already
gone.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add a helper to quickly determine if a hostdev is a PCI device,
instead of doing a tedious 'if' check with hostdev mode and
subsys type.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If the underlying PCI device of a hostdev does not exist in the
host (e.g. a SR-IOV VF that was removed while the domain was
running), skip security label handling for it.
This will avoid errors that happens during qemuProcessStop() time,
where a VF that was being used by the domain is not present anymore.
The restore label functions of both DAC and SELinux drivers will
trigger errors in virPCIDeviceNew().
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Gitlab issue #72 [1] reports that removing SR-IOVs VFs before
removing the devices from the running domains can have strange
consequences. QEMU might be able to hotunplug the device inside the
guest, but Libvirt will not be aware of that, and then the guest is
now inconsistent with the domain definition.
There's also the possibility of the VFs removal not succeeding
while the domain is running but then, as soon as the domain
is shutdown, all the VFs are removed. Libvirt can't handle
the removal of the PCI devices while trying to reattach the
hostdevs, and the Libvirt daemon can be left in an inconsistent
state (see [2]).
This patch starts to address the issue related in Gitlab #72, most
notably the issue described in [2]. When shutting down a domain
with SR-IOV hostdevs that got missing, virHostdevReAttachPCIDevices()
is failing the whole process and failing to reattach all the
PCI devices, including the ones that aren't related to the VFs that
went missing. Let's make it more resilient with host changes by
changing virHostdevGetPCIHostDevice() to return an exclusive error
code '-2' for this case. virHostdevGetPCIHostDeviceList() can then
tell when virHostdevGetPCIHostDevice() failed to find the PCI
device of a hostdev and continue to make the list of PCI devices.
virHostdevReAttachPCIDevices() will now be able to proceed reattaching
all other valid PCI devices, at least. The 'ghost hostdevs' will be
handled later on.
[1] https://gitlab.com/libvirt/libvirt/-/issues/72
[2] https://gitlab.com/libvirt/libvirt/-/issues/72#note_459032148
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We're going to add logic to handle the case where a previously
existing PCI device does not longer exist in the host.
The logic was copied from virPCIDeviceNew(), which verifies if a
PCI device exists in the host, returning NULL and throwing an
error if it doesn't. The NULL is used for other errors as well
(product/vendor id read errors, dev id overflow), meaning that we
can't re-use virPCIDeviceNew() for the purpose of detecting
if the device exists.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Via coccinelle (not the handbag!)
spatches used:
@ rule1 @
identifier a, b;
symbol NULL;
@@
- b = a;
... when != a
- a = NULL;
+ b = g_steal_pointer(&a);
@@
- *b = a;
... when != a
- a = NULL;
+ *b = g_steal_pointer(&a);
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
If the VM isn't active calculating the job stats doesn't make sense.
Additionally this prevents a crash of libvirtd if qemu terminates while
libvirt wasn't running:
Thread 28 "init-backup-tes" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffb9310640 (LWP 3201116)]
qemuDomainJobInfoUpdateTime (jobInfo=0x0) at ../../../libvirt/src/qemu/qemu_domainjob.c:275
275 if (!jobInfo->started)
(gdb) bt
#0 qemuDomainJobInfoUpdateTime (jobInfo=0x0) at ../../../libvirt/src/qemu/qemu_domainjob.c:275
#1 0x00007fffcba1a12d in qemuBackupJobTerminate (vm=0x7fff9c1bc840, jobstatus=QEMU_DOMAIN_JOB_STATUS_CANCELED) at ../../../libvirt/src/qemu/qemu_backup.c:563
#2 0x00007fffcbaefcae in qemuProcessStop
(driver=0x7fff9c144ff0, vm=0x7fff9c1bc840, reason=VIR_DOMAIN_SHUTOFF_DAEMON, asyncJob=QEMU_ASYNC_JOB_NONE, flags=<optimized out>)
at ../../../libvirt/src/qemu/qemu_process.c:7812
#3 0x00007fffcbaf2a10 in qemuProcessReconnect (opaque=<optimized out>) at ../../../libvirt/src/qemu/qemu_process.c:8578
#4 0x00007ffff7c46bb5 in virThreadHelper (data=<optimized out>) at ../../../libvirt/src/util/virthread.c:233
#5 0x00007ffff6e453f9 in start_thread () at /lib64/libpthread.so.0
#6 0x00007ffff766fb53 in clone () at /lib64/libc.so.6
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will remove unnecessary actions if the VM crashed. The
cleanup needs to be performed always, thus needs to be moved earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If there are no source extents the volume XML has an empty <source>
element. Remove it if there's nothing in it by using
virXMLFormatElement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the extent formatting code into
virStorageVolDefFormatSourceExtents.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the backing store of the image can't be parsed
virStorageSourceNewFromBacking returns -1. storageBackendProbeTarget
then also fails which makes the pool refresh fail or even the storage
pool becomes inactive after (re)start of libvirtd.
In situations when we can't access the backing store via network we
just report the backing store string, thus we can do the same thing for
unparsable backing store to prevent the pool from going offline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit bc3a78f61a errorneously removed the return value check from
virStorageSourceNewFromBacking. In cases when we e.g. can't parse the
backing store string this leads to a crash:
#0 virStorageSourceGetActualType (def=0x0) at ../../../libvirt/src/conf/storage_source_conf.c:1014
#1 0x00007ffff7cee4f9 in virStorageSourceIsLocalStorage (src=<optimized out>) at ../../../libvirt/src/conf/storage_source_conf.c:1026
#2 0x00007ffff455c97c in storageBackendProbeTarget (encryption=0x7fff9c122ce8, target=0x7fff9c122c68) at ../../../libvirt/src/storage/storage_util.c:3443
#3 virStorageBackendRefreshVolTargetUpdate (vol=0x7fff9c122c30) at ../../../libvirt/src/storage/storage_util.c:3519
#4 0x00007ffff455cdc0 in virStorageBackendRefreshLocal (pool=0x7fff9c010ea0) at ../../../libvirt/src/storage/storage_util.c:3593
#5 0x00007ffff454f0a1 in storagePoolRefreshImpl
(backend=backend@entry=0x7ffff4711180 <virStorageBackendDirectory>, obj=obj@entry=0x7fff9c010ea0, stateFile=stateFile@entry=0x7fff9c111a90 "/var/run/libvirt/storage/tmp.xml") at ../../../libvirt/src/storage/storage_driver.c:103
#6 0x00007ffff4550ea5 in storagePoolUpdateStateCallback (obj=0x7fff9c010ea0, opaque=<optimized out>) at ../../../libvirt/src/storage/storage_driver.c:165
#7 0x00007ffff7cefef4 in virStoragePoolObjListForEachCb (payload=<optimized out>, name=<optimized out>, opaque=0x7fffc8a489c0)
at ../../../libvirt/src/conf/virstorageobj.c:435
#8 0x00007ffff7c03195 in virHashForEachSafe
(table=<optimized out>, iter=iter@entry=0x7ffff7cefec0 <virStoragePoolObjListForEachCb>, opaque=opaque@entry=0x7fffc8a489c0)
at ../../../libvirt/src/util/virhash.c:414
#9 0x00007ffff7cf0520 in virStoragePoolObjListForEach
(pools=<optimized out>, iter=iter@entry=0x7ffff4550e10 <storagePoolUpdateStateCallback>, opaque=opaque@entry=0x0)
at ../../../libvirt/src/conf/virstorageobj.c:468
#10 0x00007ffff454f43a in storagePoolUpdateAllState () at ../../../libvirt/src/storage/storage_driver.c:184
#11 storageStateInitialize (privileged=<optimized out>, root=<optimized out>, callback=<optimized out>, opaque=<optimized out>)
at ../../../libvirt/src/storage/storage_driver.c:315
#12 0x00007ffff7e10c04 in virStateInitialize
(opaque=0x555555621820, callback=0x55555557b1d0 <daemonInhibitCallback>, root=0x0, mandatory=<optimized out>, privileged=true)
at ../../../libvirt/src/libvirt.c:656
#13 virStateInitialize
(privileged=<optimized out>, mandatory=mandatory@entry=false, root=root@entry=0x0, callback=callback@entry=0x55555557b1d0 <daemonInhibitCallback>, opaque=opaque@entry=0x555555621820) at ../../../libvirt/src/libvirt.c:638
#14 0x000055555557b230 in daemonRunStateInit (opaque=0x555555621820) at ../../../libvirt/src/remote/remote_daemon.c:605
#15 0x00007ffff7c46bb5 in virThreadHelper (data=<optimized out>) at ../../../libvirt/src/util/virthread.c:233
#16 0x00007ffff6e453f9 in start_thread () at /lib64/libpthread.so.0
#17 0x00007ffff766fb53 in clone () at /lib64/libc.so
An invalid image can be easily created by:
$ qemu-img create -f qcow2 -F qcow2 -b 'json:{' -u img.qcow2 10M
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The most important bit is that the caller is expected to pass
locked monitor.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Using the job owner API name directly works fine as long as it is a
static string or the owner's thread is still running. However, this is
not always the case. For example, when the owner API name is filled in a
job when we're reconnecting to existing domains after daemon restart,
the dynamically allocated owner name will disappear with the
reconnecting thread. Any follow up usage of the pointer will read random
memory.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit 010ed0856b and commit db64acfbda introduced the ability to use
the <teaming> element in a generic <hostdev> (previously it could only
be used with <interface type='hostdev'>). However, the patch omitted
one crucial detail - along with parsing the <teaming> element in
<hostdev>, and adding the necessary info to the qemu commandline, we
also need to modify qemuMigrationSrcIsAllowedHostdev() to allow
migration when the generic <hostdev> has a <teaming> element.
https://bugzilla.redhat.com/1927984
Fixes: 010ed0856b
Reported-by: Yalan Zhang <yalzhang@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuMonitorUnregister will be called in multiple threads (e.g. threads
in rpc worker pool and the vm event thread). In some cases, it isn't
protected by the monitor lock, which may lead to call g_source_unref
more than one time and a use-after-free problem eventually.
Add the missing lock in qemuProcessHandleMonitorEOF (which is the only
position missing lock of monitor I found).
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The libvirt libxl driver has no access to FDs associated with VM disks.
The disks are opened by libxl.so and any related FDs are not exposed to
applications. The prevents using virtlockd's auto-release feature to
release locks when the FD is closed. Acquiring and releasing locks is
explicitly handled by the libxl driver.
The current logic is structured such that locks are acquired in
libxlDomainStart and released in libxlDomainCleanup. This works well
except for migration, where the locks must be released on the source
host before the domain can be started on the destination host, but the
domain cannot be cleaned up until the migration confirmation stage.
When libxlDomainCleanup if finally called in the confirm stage, locks
are again released resulting in confusing errors from virtlockd and
libvirtd
virtlockd[8095]: resource busy: Lockspace resource 'xxxxxx' is not locked
libvirtd[8050]: resource busy: Lockspace resource 'xxxxxx' is not locked
libvirtd[8050]: Unable to release lease on testvm
The error is also encountered in some error cases, e.g. when
libxlDomainStart fails before acquiring locks and libxlDomainCleanup
is still used for cleanup.
In lieu of a mechanism to check if a lock has been acquired, this patch
takes an easy approach to fixing the unnecessary lock releases by adding
an indicator to the libxlDomainPrivate object that can be set when the
lock is acquired and cleared when the lock is released. libxlDomainCleanup
can then skip releasing the lock in cases where it was previously released
or never acquired in the first place.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit fa30ee04a2 caused a regression in normal domain shutown.
Initiating a shutdown from within the domain or via 'virsh shutdown'
does cause the guest OS running in the domain to shutdown, but libvirt
never reaps the domain so it is always shown in a running state until
calling 'virsh destroy'.
The shutdown thread is also an internal user of the driver shutdown
machinery and eventually calls libxlDomainDestroyInternal where
the ignoreDeathEvent inhibitor is set, but running in a thread
introduces the possibility of racing with the death event from
libxl. This can be prevented by setting ignoreDeathEvent before
running the shutdown thread.
An additional improvement is to handle the destroy event synchronously
instead of spawning a thread. The time consuming aspects of destroying
a domain have been completed when the destroy event is delivered.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commints <bc760f4d7c4f964fadcb2a73e126b0053e7a9b06> and
<98a09ca48ed4fc011abf2aa290e02ce1b8f1bb5f> fixed the code to use
defines instead of magic numbers but missed this place.
Following commit <ed1ba69f5a8132f8c1e73d2a1f142d70de0b564a> changed
the cpu quota limit to reflect what kernel actually allows so using
the defines fixes XML validations as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function calls virJSONValueObjectAppend/virJSONValueArrayAppend, so
by taking a double pointer we can drop the pointer clearing from
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Avoid pointless copies of temporary strings when constructing number
JSON objects.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virJSONValueNew* won't return error nowadays so NULL checks are not
necessary. The memory can be cleared via g_autoptr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parent array takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing and don't check return value of
virJSONValueNewString as it can't fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parent object takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr for the JSON value objects and remove the cleanup label
and inline freeing of objects.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree for the pointer of the added object and remove the NULL
checks for values returned by virJSONValueNew* (except
virJSONValueNewNumberDouble) since they can't fail nowadays.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We know the exact number of keys or array members for the copied objects
so we can pre-allocate the arrays rather than inserting into them in a
loop incurring realloc copy penalty.
Also virJSONValueCopy now can't fail since all of the functions
allocating the different cases use just g_new/g_strdup internally so we
can remove the NULL checks from the recursive calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function takes ownership of @value on success so the proper
semantics will be to clear out the @value pointer. Convert @value to a
double pointer to do this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The functions report errors already and the error can nowadays only
happen on programmer errors (if the passed virJSONValue isn't an
object), which won't happen. Remove the reporting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For incremental backup we need QEMU_CAPS_BLOCKDEV,
QEMU_CAPS_BLOCKDEV_REOPEN, QEMU_CAPS_MIGRATION_PARAM_BLOCK_BITMAP_MAPPING.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Preserve block dirty bitmaps after migration with
QEMU_MONITOR_MIGRATE_NON_SHARED_(DISK|INC).
This patch implements functions which offer the bitmaps to the
destination, check for eligibility on destination and then configure
source for the migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In case when the block migration job required temporary bitmaps for
merging the appropriate checkpoints we need to clean them up when
cancelling the job. On success we don't need to do that though as the
bitmaps are just temporary thus are not written to disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add status XML infrastructure for storing a list of block dirty bitmaps
which are temporarily used when migrating a VM with
VIR_MIGRATE_NON_SHARED_DISK for cleanup after a libvirtd restart during
migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
'qemuMigrationCookieBlockDirtyBitmapsMatchDisks' maps the bitmaps from
the migration cookie to actual disk objects definition pointers.
'qemuMigrationCookieBlockDirtyBitmapsToParams' converts the bitmap
definitions from the migration cookie into parameters for the
'block-bitmap-mapping' migration parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In cases where we are copying the storage we need to ensure that also
bitmaps are copied properly. This patch adds migration cookie XML
infrastructure which will allow the migration sides reach consensus on
which bitmaps to migrate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add the migration capability flag and the propagation of the
corresponding mapping configuration. The mapping will be produced from
the bitmaps on disk depending on both sides of the migration and the
necessity to perform merges.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There's no need in the cleanup steps to invoke a transaction to delete a
single bitmap.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The non-transaction wrapper is useful for code paths which want to
delete individual bitmaps or for cleanup after a failed job where we
want to attempt to delete every bitmap individually to prevent a failure
from cleaning up the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use the new format when pre-creating the image for the user. Users
wishing to use the legacy format can always provide their own images or
use shared storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Such images don't support stuff like dirty bitmaps. Note that the
synthetic test for detecting bitmaps is used as an example to prevent
adding additional test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The capability represents qemu's ability to setup mappings for migrating
block dirty bitmaps and is based on presence of the 'transform' property
of the 'block-bitmap-mapping' property of 'migrate-set-parameters' QMP
command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch partially reverts commit 5cde9dee where the qemuExtDevicesStop()
was moved to a location before the QEMU process is stopped. It may be
alright to tear down some devices before QEMU is stopped, but it doesn't work
for the external TPM (swtpm) which assumes that QEMU sends it a signal to stop
it before libvirt may try to clean it up. So this patch moves the
virFileDeleteTree() calls after the call to qemuExtDevicesStop() so that the
pid file of virtiofsd is not deleted before that call.
Afftected libvirt versions are 6.10 and 7.0.
Fixes: 5cde9dee8c
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A VM defined similar to:
...
<features><kvm><hint-dedicated state='on'/></kvm></features>
<cpu mode="host-model"/>
...
is currently invalid, as hint-dedicated is only allowed if cpu mode
is host-passthrough or maximum. This restriction is unnecessary, see
https://bugzilla.redhat.com/show_bug.cgi?id=1857671
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Stay true to the name of the function and clear the pointer
after freeing it.
This also silences a bogus Coverity report about a double
free in qemuMonitorGetCPUInfo where qemuMonitorCPUInfoClear
is called right after allocating a new qemuMonitorCPUInfo
to fill out the non-zero defaults.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The comment and the caller assume virQEMUSaveDataNew only steals
domXML on success, but it is copied even on failure.
Also remove the misleading g_steal_pointer call on a local variable.
Reported by coverity.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The switch to g_auto left this one call behind.
Reported by Coverity.
Fixes: 4ab0d1844a
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 76f4788932 made qemuNodeDeviceDetachFlags() unusable due to an
'if then else if' chain that will always results in a 'return -1',
regardless of 'driverName' input.
Found by Coverity.
Fixes: 76f4788932
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Just return when alias is null and Remove the 'ret' variable.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This script works under two specific conditions. For each opened file,
search for all functions that has ACL calls and store them, and see
if there is a vir*DriverPtr struct declared in it. For each implementation
found, check if there is an ACL verification inside it, and error out if
none was found. The script also supports the concept of stub, where another
function takes the responsibility for the ACL call instead of the
original API.
Unfortunately this is not enough to cover the new scenario we have now,
with domain_driver.c containing helper functions that execute the ACL
calls. The script does not store state between files because, until now,
it wasn't needed to - APIs and stubs and vir*DriverPtr declarations were
always in the same file. Also, the script will not check for ACL in functions
that does not belong to a vir*DriverPtr interface. What we have now in
domain_driver.c breaks both assumptions: the functions are in a different
file, and there is no vir*DriverPtr being implemented in the file that
uses these functions.
This patch changes check-aclrules.py to accomodate this scenario. The helpers
that have ACL checks are stored beforehand in aclFuncHelpers, allowing other
files to use them to recognize a stub situation. In case the current file
being analyzed is domain_driver.c itself, we'll do a manual check using
aclFuncHelpers to verify that these functions indeed have ACL checks.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceDetachFlags() and qemuNodeDeviceDetachFlags() are mostly
equal, aside from how the virHostdevmanager pointer is retrieved and
the PCI stub driver used.
Now that the PCI stub driver verification is done early in both functions,
we can use the virDomainDriverNodeDeviceDetachFlags() helper to reduce
code duplication between them. 'driverName' is checked inside the helper
to set the appropriate stub driver.
The helper is named with the 'Flags' suffix, even when the helper itself
isn't receiving the flags from the callers, to be compliant with the
ACL function virNodeDeviceDetachFlagsEnsureACL() that is being called
inside it and was called from the original functions. Renaming the helper
would implicate in renaming REMOTE_PROC_NODE_DEVICE_DETACH_FLAGS, and all the
related structs inside remote_protocol.x, to be compliant with the ACL
rules.
This is not being checked at this moment, but we'll fix check-aclrules.py to
verify all the helpers that calls ACL functions in domain_driver.c shortly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The validation of 'driverName' does not depend on any other state and can be
done right on the start of the function. We can fail earlier while avoiding
a cleanup jump.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The validation of 'driverName' does not depend on any other state and can be
done right on the start of the function. We can fail earlier while avoiding
a cleanup jump.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceReAttach() and qemuNodeDeviceReAttach() are mostly equal,
differing only how the virHostdevManager pointer is retrieved.
Put the common code into virDomainDriverNodeDeviceReAttach() to reduce
code duplication.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Next patch will use g_autoptr() with virNodeDevicePtr for cleanups.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceReset() and qemuNodeDeviceReset() are mostly equal,
differing only how the virHostdevManager pointer is retrieved.
Put the common code into virDomainDriverNodeDeviceReset() to reduce
code duplication.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Setting the system time backward would lead to a
multiplication overflow in function virKeepAliveStart.
The function virKeepAliveTimerInternal got the same bug too.
Backtrace below:
#0 0x0000ffffae898470 in raise () from /usr/lib64/libc.so.6
#1 0x0000ffffae89981c in abort () from /usr/lib64/libc.so.6
#2 0x0000ffffaf9a36a8 in __mulvsi3 () from /usr/lib64/libvirt.so.0
#3 0x0000ffffaf8fd9e8 in virKeepAliveStart (ka=0xaaaaf954ce10, interval=interval entry=0,
count=count entry=0) at ../../src/rpc/virkeepalive.c:283
#4 0x0000ffffaf908560 in virNetServerClientStartKeepAlive (client=0xaaaaf954cbe0)
at ../../src/rpc/virnetserverclient.c:1628
#5 0x0000aaaac57eb6dc in remoteDispatchConnectSupportsFeature (server=0xaaaaf95309d0,
msg=0xaaaaf9549d90, ret=0xffff8c007fc0, args=0xffff8c002e70, rerr=0xffff9ea054a0,
client=0xaaaaf954cbe0) at ../../src/remote/remote_daemon_dispatch.c:5063
#6 remoteDispatchConnectSupportsFeatureHelper (server=0xaaaaf95309d0, client=0xaaaaf954cbe0,
msg=0xaaaaf9549d90, rerr=0xffff9ea054a0, args=0xffff8c002e70, ret=0xffff8c007fc0)
at ./remote/remote_daemon_dispatch_stubs.h:3503
#7 0x0000ffffaf9053a4 in virNetServerProgramDispatchCall(msg=0xaaaaf9549d90, client=0xaaaaf954cbe0,
server=0x0, prog=0xaaaaf953a170) at ../../src/rpc/virnetserverprogram.c:451
#8 virNetServerProgramDispatch (prog=0xaaaaf953a170, server=0x0, server entry=0xaaaaf95309d0,
client=0xaaaaf954cbe0, msg=0xaaaaf9549d90) at ../../src/rpc/virnetserverprogram.c:306
#9 0x0000ffffaf90a6bc in virNetServerProcessMsg (msg=<optimized out>, prog=<optimized out>,
client=<optimized out>, srv=0xaaaaf95309d0) at ../../src/rpc/virnetserver.c:137
#10 virNetServerHandleJob (jobOpaque=0xaaaaf950df80, opaque=0xaaaaf95309d0)
at ../../src/rpc/virnetserver.c:154
#11 0x0000ffffaf812e14 in virThreadPoolWorker (opaque=<optimized out>)
at ../../src/util/virthreadpool.c:163
#12 0x0000ffffaf81237c in virThreadHelper (data=<optimized out>) at ../../src/util/virthread.c:246
#13 0x0000ffffaea327ac in ?? () from /usr/lib64/libpthread.so.0
#14 0x0000ffffae93747c in ?? () from /usr/lib64/libc.so.6
(gdb) frame 3
#3 0x0000ffffaf8fd9e8 in virKeepAliveStart (ka=0xaaaaf954ce10, interval=interval entry=0,
count=count entry=0) at ../../src/rpc/virkeepalive.c:283
283 timeout = ka->interval - delay;
(gdb) list
278 now = time(NULL);
279 delay = now - ka->lastPacketReceived; <='delay' got a negative value
280 if (delay > ka->interval)
281 timeout = 0;
282 else
283 timeout = ka->interval - delay;
284 ka->intervalStart = now - (ka->interval - timeout);
285 ka->timer = virEventAddTimeout(timeout * 1000, virKeepAliveTimer, <= multiplication overflow
286 ka, virObjectFreeCallback);
287 if (ka->timer < 0)
(gdb) p now
$2 = 18288001
(gdb) p ka->lastPacketReceived
$3 = 1609430405
Signed-off-by: BiaoXiang Ye <yebiaoxiang@huawei.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
All of these strings are allocated once, freed once, and are never
returned out of the function where they are declared.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
* src/util/virsocket.c (virSocketRecvFD): Set msg.msg_controllen as documented
in the man pages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
According to meson.build the minimal version of curl needed is
7.18.0 which was released in January 2008. If the minimal version
is bumped to 7.19.1 (released in November 2008) we can drop some
workarounds because this newer version provides APIs we need.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These are all cases when 1) the pointer is passed by reference from
the caller (ie.e. **) and expects it to be NULL on return if there is
an error, or 2) the variable holding the pointer is being checked or
re-used in the same function, but not right away.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
switching to g_autofree left many cleanup: sections empty.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Or when it will be immediately have a new value assigned to it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
mimeType is initialized to NULL, and then only set in one place, just
before a check (not involving mimeType) that then VIR_FREEs mimeType
if it fails. If we just reorder the code to do the check prior to
setting mimeType, then there won't be any need to VIR_FREE(mimeType)
on failure (because it will already be empty/NULL).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we put the potential return string into the g_autofreed tmpResult,
and the move it to the returned "result" only as a final step ater, we
can avoid the need to explicitly VIR_FREE (or g_free) on failure.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Although the three functions esxFreePrivate(), esxFreeStreamPrivate(),
and esxUtil_FreeParsedUri() are calling VIR_FREE on *object, and so in
theory the caller of the function might rely on "object" (the free
function's arg) being set to NULL, in practice these functions are
only called from a couple places each, and in all cases the pointer
that is passed is a local variable, and goes out of scope almost
immediately after calling the Free function, so it is safe to change
VIR_FREE() into g_free().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
volumeName was defined at the top of the function, then a new string
was assigned to it each time through a loop, but after the first
iteration of the loop, the previous string wasn't freed before
allocating a new string the next time. By reducing the scope of
volumeName to be just the loop, and making it g_autofree, we eliminate
the leak.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These strings were being VIR_FREEd multiple times because they were
defined at the top of a function, but then set each time through a
loop. But they are only used inside that loop, so they can be
converted to use g_autofree if their definition is also placed inside
that loop.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All of these strings are allocated once, freed once, and are never
returned out of the function where they are created, used, and are
freed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All callers are now using the on|off syntax, so yes|no is a unreachable
code path.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has long accepted many different values for boolean properties, but
set accepted has been different depending on which QEMU parser you hit.
The on|off values were supported by all QEMU parsers. The yes|no, y|n,
true|false values were only partially supported:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg01012.html
Thus we should standardize on on|off everywhere since that is most
widely supported in QEMU.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has long accepted many different values for boolean properties, but
set accepted has been different depending on which QEMU parser you hit.
The on|off values were supported by all QEMU parsers. The yes|no, y|n,
true|false values were only partially supported:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg01012.html
Thus we should standardize on on|off everywhere since that is most
widely supported in QEMU.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -vnc since the change to use
QemuOpts in 2.2.0, so we check based on the new capability flag.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was introduced in QEMU 2.2.0, and is visible by -vnc appearing in
the "query-command-line-options" data.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When virDomainGetFSInfo() is called over a QEMU/KVM domain it
results into calling of 'guest-get-fsinfo' guest agent command to
which it replies with info on guest (mounted) filesystems. When
filling return structure we also try to do basic lookup and
translate guest agent provided disk address into disk target (as
seen in domain XML). This can of course fail - guest can have
variety of disks not recorded in domain XML (iSCSI, scsi_debug,
NFS to name a few). If that's the case, a debug message is logged
and no disk target is added into the return structure.
However, due to the way our code is written the caller is led to
believe that the target was added into the structure. This may
lead to a situation where the array of disk targets (strings)
contains NULL. But our RPC structure says the array contains only
non-NULL strings. This results in somewhat 'cryptic' (at least to
users) error message:
error: Unable to get filesystem information
error: Unable to encode message payload
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1919783
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous commit, the freeing of @info_ret inside of
virDomainFSInfoFormat() looks like this:
for () {
if (info_ret)
virDomainFSInfoFree(info_ret[i]);
}
It is needless to compare @info_ret against NULL in each
iteration. We can switch the order and do the comparison first
followed by the loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When qemuDomainGetFSInfo() is called it calls
qemuDomainGetFSInfoAgent() which executes 'guest-get-fsinfo'
guest agent command, parses returned JSON and returns an array of
qemuAgentFSInfo structures (well, pointers to those structs).
Then it grabs a domain job and tries to do some matching of guest
returned info against domain definition. This matching is done in
virDomainFSInfoFormat() which also frees the array of
qemuAgentFSInfo structures allocated earlier.
But this is not just. If acquiring the domain job fails (or
domain activeness check executed right after that fails) then
virDomainFSInfoFormat() is not called, leaking the array of
structs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As the very first thing, this function checks whether the number
of items inside @agentinfo array is not negative. This is
redundant as the only caller - qemuDomainGetFSInfo() already
checked for that and would not even call this function if that
was the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -spice since at least 1.5.3,
so we don't need to check for it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -chardev since at least 1.5.3,
so we don't need to check for it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -2 value is misleading because if 'qemuAgentFSFreeze' fails it
doesn't necessarily mean that the command was sent to the agent.
Since callers don't care about the -2 value specifically, remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If we didn't freeze any filesystems we should not even attempt thawing
them. Additionally 'guest-fsfreeze-freeze' fails if the filesystems are
already frozen, where thawing them may break users data integrity if
they used VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE accidentally after an
explicit virDomainFSFreeze and the next snapshot without that flag would
be taken with already thawed filesystems.
This effectively reverts 7c736bab06 .
Libvirt nowadays checks whether the guest agent is connected and pings
it before issuing an command so it's very unlikely that we'd end up in a
situation where qemuSnapshotCreateActiveExternal froze filesystems and
didn't thaw them.
Additionally we now discourage the use of
VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE since users have better control if
they freeze the FS themselves.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The flag creates additional points of failure which are hard to recover
from, such as when thawing of the filesystems fails after an otherwise
successful snapshot.
Encourage use of explicit virDomainFSFreeze/virDomainFSThaw.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use g_autofree for 'dom_xml' to free it on some of the (unlikely) code
paths jumping to cleanup prior to the deallocation which is done right
after it's not needed any more since it's a big string.
Noticed when running under valgrind:
==2204780== 8,192 bytes in 1 blocks are definitely lost in loss record 2,539 of 2,551
==2204780== at 0x483BCE8: realloc (vg_replace_malloc.c:834)
==2204780== by 0x4D890DF: g_realloc (in /usr/lib64/libglib-2.0.so.0.6600.4)
==2204780== by 0x4DA3AF0: g_string_append_vprintf (in /usr/lib64/libglib-2.0.so.0.6600.4)
==2204780== by 0x4917293: virBufferAsprintf (virbuffer.c:307)
==2204780== by 0x49B0B75: virDomainChrDefFormat (domain_conf.c:26109)
==2204780== by 0x49E25EF: virDomainDefFormatInternalSetRootName (domain_conf.c:28956)
==2204780== by 0x15F81D24: qemuDomainDefFormatBufInternal (qemu_domain.c:6204)
==2204780== by 0x15F8270D: qemuDomainDefFormatXMLInternal (qemu_domain.c:6229)
==2204780== by 0x15F8270D: qemuDomainDefFormatLive (qemu_domain.c:6279)
==2204780== by 0x15FD8100: qemuMigrationSrcBeginPhase (qemu_migration.c:2395)
==2204780== by 0x15FE0F0D: qemuMigrationSrcPerformPeer2Peer3 (qemu_migration.c:4640)
==2204780== by 0x15FE0F0D: qemuMigrationSrcPerformPeer2Peer (qemu_migration.c:5093)
==2204780== by 0x15FE0F0D: qemuMigrationSrcPerformJob (qemu_migration.c:5168)
==2204780== by 0x15FE280E: qemuMigrationSrcPerform (qemu_migration.c:5372)
==2204780== by 0x15F9BA3D: qemuDomainMigratePerform3Params (qemu_driver.c:11841)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In one of my previous commits I've made an attempt to restore the
noqueue qdisc on a TAP corresponding to domain's <interface/> if
QoS is cleared out. The commit consisted of two almost identical
hunks. In both the pointer is dereferenced. But in one of them,
the pointer to new bandwidth can't be NULL while in the other it
can leading to a crash.
Fixes: d53b092353
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1919619
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Previous patches have converted VIR_FREE to g_free in functions with
names ending in Free() and Dispose(), but there are a few similar
functions with names that don't fit that pattern, but server the same
purpose (and thus can survive the same conversion). in particular
*Free*(), and *Unref().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Invocations of the macro ESX_VI__TEMPLATE__FREE() will free the main
object (referenced as "item") that's pointing to all the things being
VIR_FREEd in the body, so it is safe for all the pointers in item to
just be g_freed rather that VIR_FREEd.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The root directory can be provided by user (or a temporary one is
generated) and is always formatted into connection URI for both
secret driver and QEMU driver, like this:
qemu:///embed?root=$root
But if it so happens that there is an URI unfriendly character in
root directory or path to it (say a space) then invalid URI is
formatted which results in unexpected results. We can trust
g_dir_make_tmp() to generate valid URI but we can't trust user.
Escape user provided root directory. Always.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1920400
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This API allows fetching a list of informational messages recorded
against the domain. This provides a way to give information about
tainting of the guest due to undesirable actions/configs, as well
as provide details of deprecated features.
The output of this API is explicitly targetted at humans, not
machines, so it is inappropriate to attempt to pattern match on
the strings and take action off them, not least because the messages
are marked for translation.
Should there be a demand for machine targetted information, this
would have to be addressed via a new API, and is not planned at
this point in time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These messages are only valid while the domain is running.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These messages will be stored in the live status XML.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The <teaming> element in <interface> allows pairing two interfaces
together as a simple "failover bond" network device in a guest. One of
the devices is the "transient" interface - it will be preferred for
all network traffic when it is present, but may be removed when
necessary, in particular during migration, when traffic will instead
go through the other interface of the pair - the "persistent"
interface. As it happens, in the QEMU implementation of this teaming
pair (called "virtio failover" in QEMU) the transient interface is
always a host network device assigned to the guest using VFIO (aka
"hostdev"); the persistent interface is always an emulated virtio NIC.
When support was initially added for <teaming>, it was written to
require that the transient/hostdev device be defined using <interface
type='hostdev'>; this was done because the virtio failover
implementation in QEMU and the virtio guest driver demands that the
two interfaces in the pair have matching MAC addresses, and the only
way libvirt can guarantee the MAC address of a hostdev network device
is to use <interface type='hostdev'>, whose main purpose is to
configure the device's MAC address before handing the device to
QEMU. (note that <interface type='hostdev'> in turn requires that the
network device be an SRIOV VF (Virtual Function), as that is the only
type of network device whose MAC address we can set in a way that will
survive the device's driver init in the guest).
It has recently come up that some users are unable to use <teaming>
because they are running in a container environment where libvirt
doesn't have the necessary privileges or resources to set the VF's MAC
address (because setting the VF MAC is done via the same device's PF
(Physical Function), and the PF is not exposed to libvirt's container).
At the same time, these users *are* able to set the VF's MAC address
themselves in advance of staring up libvirt in the container. So they
could theoretically use the <teaming> feature if libvirt just skipped
the "setting the MAC address" part.
Fortunately, that is *exactly* the difference between <interface
type='hostdev'> (which must be a "hostdev VF") and <hostdev> (a "plain
hostdev" - it could be *any* PCI device; libvirt doesn't know what type
of PCI device it is, and doesn't care).
But what is still needed is for libvirt to provide a small bit of
information on the QEMU commandline argument for the hostdev, telling
QEMU that this device will be part of a team ("failover pair"), and
the id of the other device in the pair.
To make both of those goals simultaneously possible, this patch adds
support for the <teaming> element to plain <hostdev> - libvirt doesn't
try to set any MAC addresses, and QEMU gets the extra commandline
argument it needs)
(actually, this patch adds only the parsing/formatting of the
<teaming> element in <hostdev>. The next patch will actually wire that
into the qemu driver.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In preparation for using the same element in two places, split the
parsing/formating for that subelement out of the virDomainNetDef
functions into their own functions.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To make it easier to split out the parsing/formatting of the <teaming>
element into separate functions (so we can more easily add the
<teaming> element to <hostdev>, change its virDomainNetDef so that it
points to a virDomainNetTeamingInfo rather than containing one.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This struct was previously defined only within virDomainNetDef where
it was used, but I need to also use it in virDomainHostdevDef, so move
the internal struct out to its own "official" struct and give it the
standard typedef duo and *Free() function.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously we only checked MAC address and PCI address (or CCW
address). This is not enough information in cases where PCI address
isn't provided and multiple interfaces have the same MAC address (for
example, a virtio + hostdev "teaming" pair - their MAC addresses are
always the same).
Resolves: https://bugzilla.redhat.com/1926190
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
TPM devices with model='tpm-tis' are only valid with x86 and aarch64
virt machines. Add a check to qemuValidateDomainDeviceDefTPM() to
ensure VIR_DOMAIN_TPM_MODEL_TIS is only used with these architectures.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Starting a VM with swtpm device fails with qemu-system-aarch64.
E.g. with TPM device config
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
QEMU reports the following error
error: internal error: process exited while connecting to monitor:
2021-02-07T05:15:35.378927Z qemu-system-aarch64: -device
tpm-tis,tpmdev=tpm-tpm0,id=tpm0: 'tpm-tis' is not a valid device model name
Indeed the TPM device name is 'tpm-tis-device' [1][2] for aarch64,
versus the shorter 'tpm-tis' for x86. The devices are the same from
a functional POV, i.e. they both emulate a TPM device conforming to
the TIS specification. Account for the unfortunate name difference
when building the TPM device option in qemuBuildTPMDevStr(). Also
include a test case for 'tpm-tis-device'.
[1] https://qemu.readthedocs.io/en/latest/specs/tpm.html
[2] c294ac327c
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Our implementation was inspired by glib anyways. The difference is only
the order of arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our implementation was heavily inspired by the glib version so it's a
drop-in replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The glib implementation doesn't tolerate NULL but in most cases we check
before anyways. The rest of the callers adds a NULL check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't re-calculate the string list length on every iteration. Convert
the loop to NULL-terminated iteration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some callers don't need to know the actual lenght of the list but only
care whether the required element is present or the list is non-empty.
Don't calculate the list length in those cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'cells' can be pushed into the loop removing the need for manual
cleanup, the check whether 'line' is NULL inside of the loop is always
false since the loop checks it right before and 'line' variable is
unnecessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All callers were converted to the glib alternative. Providing our own
just to have NULL tolerance doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The glib variant doesn't accept NULL list, but there's just one caller
where it wasn't checked explicitly, thus there's no need for our own
wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing and remove the 'cleanup' label. Also make
it a bit more obvious that nothing happens if the 'old' list wasn't
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The caller doesn't care about the number of tokens so use the function
which doesn't return it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is a uncommon and trivial operation, so having an utility function
for it is pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Lookup the string with prefix locally so that we can remove the helper
which isn't universal at all.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virStringListAdd hides the fact that a O(n) count of elements is
performed every time it's called which makes it inefficient.
Stop supporting such semantics and remove the helpers. Users have a
choice of using GSList or an array with a counter variable rather than
repeated lookups.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Precalculate the lenght to avoid use of 'virStringListAdd' in a loop.
The code is also simplified by using APIs which don't return errors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since adding and removing is the main use case for the macmap module,
convert the code to a more efficient data structure.
The refactor also optimizes the loading from file where previously we'd
do a hash lookup + list lenght calculation for every entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The conversion removes the use of virStringListAdd/virStringListRemove
which try to add dynamic properties to a string list which is really
inefficient.
Storing the dbus VMState ids in a GSList is pretty straightforward and
the slightly increased complexity of the code will be paid back by
removing the string list helpers later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The iner loop copies the 'resources' array multiple times using
'virStringListAdd' which has O(n^2) complexity.
Pre-calculate the length so we can allocate the array upfront and just
copy the strings in the loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pre-allocate a buffer for the upper limit and shrink it afterwards to
avoid use of 'virStringListAdd' in a loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pre-allocate the list to the upper bound and fill it gradually. Since
the data is kept long-term and the list won't be populated much shrink
it to the actual size after parsing.
While using 'virStringListAdd' here wouldn't be as expensive as this
function is used just once, the removal will allow to remove
'virStringListAdd' altogether to discourage the antipattern it promotes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already know the upper bound of items we might need so we can
allocate the array upfront and avoid the quadratic complexity of
'virStringListAdd'.
In this instance the returned data is kept only temporarily so a
potential unused space due to filtered-out entries doesn't impose a
long-term burden on memory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virHashGetItems' already returns the number of entries which will be
considered for addition to the list so we can allocate it to the upper
bound upfront rather than growing it in a loop. This avoids the
quadratic complexity of 'virStringListAdd'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virStringListAdd' calculates the string list length on every invocation
so constructing a string list using it results in O(n^2) complexity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virStringListAdd' calculates the string list length on every invocation
so constructing a string list using it results in O(n^2) complexity.
Use a GSList which has cheap insertion and iteration and doesn't need
failure handling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
glib's 'g_autoslist()' doesn't support lists of 'char *' strings. Add a
type alias 'virGSListString' so that we can register an 'autoptr'
function for it for simple usage of GSList with strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some code paths return -1 directly while others jump to 'cleanup' which
cleans the list of mounts. Since qemuDomainGetPreservedMounts now
returns a NULL-terminated list, convert devMountsPath to g_auto(GStrv)
and remove the cleanup altoghether.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'i' is used in both outer and inner loop. Since 'devMountsPath' is now a
NULL-terminated list, we can use a GStrv to iterate it;
Additionally rewrite the conditional of adding to the 'unlinkPaths'
array so that it's more clear what's happening.
Fixes: 5c86fbb72d
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor the handling of internals so that NULL-terminated lists are
always returned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In commit 88957116c9 I've adapted
libvirt to QEMU's deprecation of -mem-path and -mem-prealloc and
switched to memory-backend-* even for system memory. My claim was
that that's what QEMU does under the hood anyway. And indeed it
was: see QEMU commit 900c0ba373aada4c13d47d95330aa72ec4067ba5 and
look at function create_default_memdev().
However, then commit d96c4d5f193e0e45beec80a6277728b32875bddb was
merged into QEMU. While it was fixing a bug, it also changed the
create_default_memdev() function in which it started turning off
use of canonical path (by setting
"x-use-canonical-path-for-ramblock-id" attribute to false). This
wasn't documented until QEMU commit
8db0b20415c129cf5e577a593a4a0372d90b7cc9. The path affects
migration - the same path has to be used on the source and on the
destination. Therefore, if there is old guest started with '-m X'
it has "pc.ram" block which doesn't use canonical path and thus
when migrating to newer QEMU which uses memory-backend-* we have
to turn off the canonical path explicitly. Otherwise,
"/objects/pc.ram" path would be expected by QEMU which doesn't
match the source.
Ideally, we would need to set it only for some machine types
(4.0 and older) because newer machine types already do what we
are doing. However, we treat machine types as opaque strings and
therefore we don't want to parse nor inspect their versions. But
then again, newer machine types already do what we are doing in
this commit, so when old machine types are deprecated and removed
we can remove our hack and forget it ever happened.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1912201
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability tracks whether memory-backend-file has
"x-use-canonical-path-for-ramblock-id" attribute. Introduced into
QEMU by commit fa0cb34d2210cc749b9a70db99bb41c56ad20831. As of
QEMU commit 8db0b20415c129cf5e577a593a4a0372d90b7cc9 the property
is considered stable by qemu despite the 'x-' prefix to preserve
compatibility with released qemu versions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'conflict' key in a virt_daemon_unit dictionary is not used when
generating systemd service and socket files. The comment associated
with the key claims the default is 'true', and a few build files
needlessly set it to 'true' when defining their virt_daemon_unit.
Remove the 'conflict' key and its use in the affect build files.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When running on host with systemd we register VMs with machined.
In this case systemd creates the root VM cgroup for us. This has some
implications where one of them is that systemd owns all files inside
the root VM cgroup and we should not touch them.
We already use DBus calls for some of the APIs but for the remaining
ones we will continue accessing the files directly. Systemd doesn't
support threaded cgroups so we need to do this.
The reason why we don't use DBus for most of the APIs is that we already
have a code that works with files and we would have to check if systemd
supports each API.
This change introduces new topology on systemd hosts:
$ROOT
|
+- machine.slice
|
+- machine-qemu\x2d1\x2dvm1.scope
|
+- libvirt
|
+- emulator
+- vcpu0
+- vcpu0
compared to the previous topology:
$ROOT
|
+- machine.slice
|
+- machine-qemu\x2d1\x2dvm1.scope
|
+- emulator
+- vcpu0
+- vcpu0
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This will check if the cgroup actually exists on the system.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we create a new child cgroup and the parent cgroup has any process
attached to it enabling controllers for the child cgroup fails with
error. We need to move the process into the child cgroup first before
enabling any controllers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove one level of indentation by splitting the condition.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When running on host with systemd we register VMs with machined.
In this case systemd creates the root VM cgroup for us. This has some
implications where one of them is that systemd owns all files inside
the root VM cgroup and we should not touch them.
If we change any value in file that systemd knows about it will be
changed to what systemd thinks it should be when executing
`systemctl daemon-reload`.
These are the APIs that we need to call using systemd because they set
limits that are proportional to sibling cgroups.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "max" model can be treated the same way as "host" model in general.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a special CPU model similar to "-cpu host", so won't use our
normal CPU model detection logic.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The logic applied in the ppc64 case isn't quite correct, as the
interpretation of maximum mode depends on whether hardware virt
is used or not. This is information the CPU driver doesn't have.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The data reported is the same as for "host-passthrough"
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For hardware virtualization this is functionally identical to the
existing host-passthrough mode so the same caveats apply.
For emulated guest this exposes the maximum featureset supported by
the emulator. Note that despite being emulated this is not guaranteed
to be migration safe, especially if different emulator software versions
are used on each host.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The @vhostuser member of virStorageSource structure is allocated
during parsing in virDomainDiskSourceVHostUserParse() but never
freed leading to a memleak. Since the member is an object it has
to be unrefed instead of g_free()-d.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There are few cases where STREQLEN() is called like this:
STREQLEN(var, string, strlen(string))
which is the same as STRPREFIX(var, string). Use STRPREFIX()
because it is more obvious what the check is doing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
A <machine/> element can have "deprecated" attribute that
corresponds to 'deprecated' member of _virQEMUCapsMachineType
struct. But the member is of boolean type. Therefore, the string
returned by virXMLPropString() must be freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If parsing "maxCpus" attribute of <machine/> element fails an
error is printed but the corresponding string is not freed. While
it is very unlikely to happen (parsed XML is not user provided
and we are the ones generating it), it is possible. Instead of
freeing the variable in the error path explicitly, let's declare
it as g_autofree. And while I'm at it, let's bring it into the
loop where it's used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The various virtproxyd socket files are generated with invalid syntax,
e.g. from virtproxyd.socket
[Unit]
Description=Libvirt proxy local socket
Before=virtproxyd.service
libvirtd.socket libvirtd-ro.socket libvirtd-admin.socket libvirtd-tcp.socket libvirtd-tls.socket
Note the missing 'Conflicts=' in the last line. Fix it by prepending
'Conflicts=' to libvirtd_socket_conflicts when adding virtproxyd
to virt_daemon_units.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
On platforms that lack both getauxval() and elf_aux_info(),
such as OpenBSD and macOS, host CPU detection can't work.
https://gitlab.com/libvirt/libvirt/-/issues/121
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
No need to fetch the same information twice.
As a side effect, this solves a bug where, on platforms where
elf_aux_info() is used instead of getauxval(), we would not
make sure the CPUID feature is available before attempting to
use it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This header is not present on several non-Linux targets that
nonetheless support aarch64.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A few commits back I've introduced new 'virtio-pmem' <memory/>
device. Since it's virtio it goes onto PCI bus. Therefore, on
hotplug new PCI address is generated (or provided one is
reserved). However, if hotplug fails (for whatever reason) the
address needs to be released. This is different to 'dimm' type of
address because for that type we don't keep a map of used slots
rather generate one on each address assign request. The map is
then thrown away. But for PCI addresses we keep internal state
and thus has to keep it updated. Therefore, this new
qemuDomainReleaseMemoryDeviceSlot() function is NOP for those
models which use 'dimm' address type ('dimm' and 'nvdimm').
While I'm at it, let's release the address in case of hot unplug.
Not that is supported (any such attempt fails with the following
error:
"virtio based memory devices cannot be unplugged"
But if QEMU ever implements hot unplug then we don't have to
remember to fix our code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Currently, nmdm console device requires user to specify master and slave
path attributes (such as /dev/nmdm0A and /dev/nmdm0B respectively).
However, making user find a non-occupied device name might be not
convenient, especially for the remote connections.
Update the logic to make these attributes optional. In case if not
specified, use /dev/nmdm$UUID[AB], where $UUID is a domain's UUID.
With this schema it's unlikely nmdm device will clash with other domains
or even other non-bhyve nmdm devices.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of these options are actually supported by vhostuser disk so
we should allow them to be usable.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, requesting domain capabilities fails when the specified
emulator binary does not equal to "/usr/sbin/bhyve". As we're
not using user-specified emulator anyway, drop this check to avoid
showing errors for values like "bhyve" (without absolute path).
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Get rid of the 'need_release' variable. The code can be rewritten
so that it is not needed.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When deleting the vhostuserclient interface, OVS prompts that the interface does not exist,
Through the XML file, I found that the "target dev" has a '\n', results in an XML parsing error.
XML file:
<target dev='vm-20ac9c030a47
'/>
That is because 'ovs-vsctl' returns a newline result, always come with a '\n',
and the vircommandrun function puts it in ifname.
So virNetDevOpenvswitchGetVhostuserIfname should remove '\n' from ifname.
Signed-off-by: Yalei Li <liyl43@chinatelecom.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function is only called from one place, and has, well... not a
*misleading* name, but it doesn't fit the standard frame of functions
that end in "Free" (it doesn't actually free the object pointed to by
its argument, but frees *some parts* of the content of the object).
Rather than try to think up an appropriate name, let's just move the
meat of this function into its one and only caller,
virNetLibsshSessionDispose(), which will allow us to convert its
VIR_FREEs into g_free in a future patch.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virDomainCapsDispose() was the only caller of
virDomainCapsStringValuesFree(), which 1) didn't actually free the
object it was called with, but only cleared it, making it less
mechanical to convert from VIR_FREE to g_free (since it's not
immediately obvious from looking at virDomainCapsStringValuesFree()
that the pointers being cleared will never again be used).
We could have renamed the function to virDomainCapsStringValuesClear()
to side-step the confusion of what the function actually does, but
that would just make the upcoming switch from VIR_FREE to g_free
require more thought. But since there is only a single caller to the
function, and it is a vir*Dispose() function (indicating that the
object containing the virDomainCapsStringValues is going to be freed
immediately after the function finishes), and thus VIR_FREE() *could*
be safely replaced by g_free()), we instead just move the contents of
virDomainCapsStringValuesFree() into virDomainCapsDispose() (and
*that* function will be trivially converted in an upcoming
"mechanical" patch).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is another *Free() function that doesn't free the object it is
passed. Instead it frees and clears some parts of the object.
In this case, the function is actually called from two places, and one
of them (virNetSSHSessionAuthReset) appears to be assuming that the
pointers actually *will* be cleared. So the proper thing to do here
(?) is to rename the function to virNetSSHSesionAuthMethodsClear().
(NB: virNetSSHSessionAuthReset is seemingly never called from
anywhere. Is this one of those functions that actually *is* called by
some strange MACRO invocation? Or it is truly one of those
"written-but-never-used" functions that can be deleted? (if the latter
is the case, then I would rather move the contents of
virNetSessionAuthMethodsFree() into its only other caller,
virNetSSHSessionDispose(), so that the VIR_FREEs could be replaced
with g_free.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These functions are all only called as a part of qemuFirmwareFree(),
which frees the qemuFirmware object before return, so we can be sure
none of the pointers is referenced after freeing (and thus there is no
need to clear any of them).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These functions all cooperate to free memory pointed to by a single
object that contains (doesn't *point to*, but actually contains)
several sub-objects. They were written to send copies of these
sub-objects to subordinate functions, rather than just sending
pointers to the sub-objects.
Let's change these functions to just send pointers to the objects
they're cleaning out rather than all the wasteful and pointless
copying.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Several functions had the names virFirmware[something]Free(), but they
aren't taking a pointer to some object and freeing it. Instead, they
are making a copy of the content of an entire object, then Freeing the
objects pointed to by that content.
As a first step in a too-complicated cleanup just to eliminate a few
occurrences of VIR_FREE(), this patch renames those functions to more
accurately reflect what they do - they Free the *Content* of their
arguments.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
dhcpHostFree() and addnHostFree() don't follow the normal pattern of
*Free functions in the rest of libvirt code - they are actually more
similar to the *Dispose() functions, in that they free all subordinate
objects, but not the object pointed to by the argument
itself. However, the arguments aren't virObjects, so it wouldn't be
proper to name them *Dispose() either.
They *currently* behave similar to a *Clear() function, in that they
free all the subordinate objects and nullify the pointers of those
objects. HOWEVER, we don't actually need or want that behavior - the
two functions in question are only called as part of a higher level
*Free() function, and the pointers are not referenced in any way
between the time they are freed and when the parent object is freed.
So, since the current name isn't correct, nor is *Dispose(), and we
want to change the behavior in such a way that *Clear() also wouldn't
be correct, lets name the functions *FreeContent(), which is an
accurate description of what the functions do, and what we *want* them
to do.
And since it's such a small patch, we can go ahead and change that
behavior - replacing the VIR_FREEs with g_free.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit <318d807a0bd3372b634d1952b559c5c627ccfa5b> added a fix to skip
most of the block stat code to not log error message for missing storage
sources but forgot to increase the recordnr counter.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The correct backend type is 'vc', same as in qemuBuildChrChardevStr()
where we generate qemu command line.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A memory leak was identified in
virCgroupEnableMissingControllers():
==11680== at 0x483EAE5: calloc (vg_replace_malloc.c:760)
==11680== by 0x4E51780: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6701.0)
==11680== by 0x4908618: virCgroupNew (vircgroup.c:701)
==11680== by 0x49096F4: virCgroupEnableMissingControllers (vircgroup.c:1146)
==11680== by 0x4909B17: virCgroupNewMachineSystemd (vircgroup.c:1228)
==11680== by 0x4909E94: virCgroupNewMachine (vircgroup.c:1313)
==11680== by 0x1694FDBC: qemuInitCgroup (qemu_cgroup.c:946)
==11680== by 0x1695046B: qemuSetupCgroup (qemu_cgroup.c:1083)
==11680== by 0x16A60126: qemuProcessLaunch (qemu_process.c:7077)
==11680== by 0x16A61504: qemuProcessStart (qemu_process.c:7384)
==11680== by 0x169B84C2: qemuDomainObjStart (qemu_driver.c:6590)
==11680== by 0x169B8776: qemuDomainCreateWithFlags (qemu_driver.c:6641)
What happens is that new virCgroup is created and stored into
@parent. Then, if @tokens is not empty the for() loop is entered
into where another virCgroup is created and @parent is replaced
with this new virCgroup. But nothing freed the old @parent.
Fixes: 77291414c7
Reported-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Implements QEMU support for vhost-user-blk together with live
hotplug/unplug.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Make the function reusable by other vhost-user based devices.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Hypervisors are capable of reporting that some features are deprecated.
This should be used to mark a domain as tainted.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has the ability to mark machine types as deprecated. This should be
exposed to management applications in the capabilities.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has the ability to mark CPUs as deprecated. This should be exposed
to management applications in the domain capabilities.
This attribute is only set when the model is actually deprecated.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The use case VIR_ALLOC_VAR deals with is very unlikely. We had just 2
legitimate uses, which were reimplemented locally using g_malloc0 and
sizeof instead as they used a static number of members of the trailing
array.
Remove VIR_ALLOC_VAR since in most cases the direct implementation is
shorter and clearer and there are no users of it currently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In this case we need a 'struct ethtool_gfeatures' followed by two
'struct ethtool_get_features_block' so there's no risk of overflow.
Use g_malloc0 and sizeof() to allocate the memory instead of
VIR_ALLOC_VAR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In both cases we need memory for a 'struct sanlk_resource' followed by
one 'struct sanlk_disk', thus there's no risk of overflow.
Use g_malloc0 and sizeof() to allocate the memory instead of
VIR_ALLOC_VAR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use g_autofree to allow removal of 'cleanup:' and the 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use g_autofree and remove the 'cleanup' section and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Switch to the more common approach of having arrays allocated separately
rather than trailing the struct.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Users were replaced with virSecureEraseString with explicit freeing of
the memory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are no users any more. The replacement is to use g_auto and
virSecureEraseString explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
