This reverts commit b3710e9a2a.
That check is very valuable for our code, but it causes issue with glib >=
2.67.0 when building with clang.
The reason is a combination of two commits in glib, firstly fdda405b6b1b which
adds a g_atomic_pointer_{set,get} variants that enforce stricter type
checking (by removing an extra cast) for compilers that support __typeof__, and
commit dce24dc4492d which effectively enabled the new variant of glib's atomic
code for clang. This will not be necessary when glib's issue #600 [0] (8 years
old) is fixed. Thankfully, MR #1719 [1], which is supposed to deal with this
issue was opened 3 weeks ago, so there is a slight sliver of hope.
[0] https://gitlab.gnome.org/GNOME/glib/-/issues/600
[1] https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1719
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Similarly to previous commits, we can utilize domCaps to check if
graphics type is supported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
QEMU supports egl-headless if QEMU_CAPS_EGL_HEADLESS capability
is present. There are some additional requirements but those are
checked for in qemuValidateDomainDeviceDefGraphics() and depend
on domain configuration and thus are not representable in domain
capabilities. Let's stick with plain qemuCaps check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In my recent commit of 5216304bfe I've moved RNG model check
from domain capabilities validator into qemu validator. During
that I had to basically duplicate RNG model to qemuCaps checks.
Problem with this approach is that after my commit qemu validator
and domCaps are disconnected and thus domCaps might report (in
general) different set of supported RNG models.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In my recent commit of a33279daa8 I've moved video model check
from domain capabilities validator into qemu validator. During
that I had to basically duplicate video model to qemuCaps checks.
Problem with this approach is that after my commit qemu validator
and domCaps are disconnected and thus domCaps might report (in
general) different set of supported video models.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This is a convenient macro for querying whether particular domain
caps enum value is set or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The helper methods for getting integer properties ignore a missing
property setting its value to zero. This lack of error reporting
resulted in missing the regression handling hotplug of USB devices
with the vendor and model IDs getting set to zero silently.
The few callers which relied on this silent defaulting have been fixed,
so now we can report fatal errors immediately.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The access of DKD_MEDIA_AVAILABLE for floppy disks, is mistakenly
protected by a check for ID_CDROM_MEDIA, introduced in:
commit 10427db779
Author: Ján Tomko <jtomko@redhat.com>
Date: Fri Jun 3 16:10:21 2016 +0200
Only return two values in udevGetUintProperty
Thus the check of DKD_MEDIA_AVAILABLE never run. In practice this didn't
matter since this property is set by the DeviceKit-Disks daemon which
was only around for 3 Fedora releases before being killed off around
F13. Thus we can just remove this legacy property.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The udevProcessStorage method relies on udevGetIntProperty ignoring
errors about non-existant properties and instead setting the value to
zero. In theory when seeing ID_CDROM=1, you might expect that devices
which are not CDs will get ID_CDROM=0, but that's not what happens in
practice. Instead the property simply won't get set at all.
IOW, the code does not need to care about the value of the property,
merely whether it exists or not.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
'kvm-spice' is a binary name used to call 'kvm' which actually is a wrapper
around qemu-system-x86_64 enabling kvm acceleration. This isn't in use
for quite a while anymore, but required to work for compatibility e.g.
when migrating in old guests.
For years this was a symlink kvm-spice->kvm and therefore covered
apparmor-wise by the existing entry:
/usr/bin/kvm rmix,
But due to a recent change [1] in qemu packaging this now is no symlink,
but a wrapper on its own and therefore needs an own entry that allows it
to be executed.
[1]: https://salsa.debian.org/qemu-team/qemu/-/commit/9944836d3
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Michal Privoznik <mprivozn redhat com>
QEMU version 4.2 introduced a performance feature under commit
d645e13287 ("kvm: i386: halt poll control MSR support").
This patch adds a new KVM feature 'poll-control' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-poll-control=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description:
<features>
<kvm>
<poll-control state='on'/>
</kvm>
</features>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In v6.3.0-rc1~67 I've made a switch: instead of listening on udev
events the nodedev driver started listening for kernel events.
This was because when a device changes its name (e.g. NICs) we
will get "move" event with DEVPATH_OLD property set, which we can
then use to remove the old device and thus keep our internal list
up to date. The switch to "kernel" source was made because if the
old NICs naming (eth0, eth1, ...) is enabled (e.g. via
net.ifnames=0 on the kernel cmd line) then udev overwrites the
property with the new name making our internal list go out of
sync. Interestingly, when the od NICs naming is not enabled then
the DEVPATH_OLD contains the correct value.
But as it turns out, "kernel" source might be missing some other
important properties, e.g. USB vendor/product IDs. Therefore,
switch back to "udev" source and wish the best of luck to users
using the old NICs naming.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1897625
Fixes: 9a13704818
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the domCaps cache is history, this code is no longer
used and thus can be removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently, whenever a domain capabilities is needed (fortunately,
after cleanup done by previous commits it is now only in
virConnectGetDomainCapabilities()), the object is stored in a
cache. But there is no invalidation mechanism for the cache
(except the implicit one - the cache is part of qemuCaps and thus
share its lifetime, but that is not enough). Therefore, if
something changes - for instance new firmware files are
installed, or old are removed these changes are not reflected in
the virConnectGetDomainCapabilities() output.
Originally, the caching was there because domCaps were used
during device XML validation and they were used a lot from our
test suite. But this is no longer the case. And therefore, we
don't need the cache and can construct fresh domCaps on each
virConnectGetDomainCapabilities() call.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1807198
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that nothing uses virDomainCapsDeviceDefValidate() it can be
removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain video model has to be validated in
qemuValidateDomainDeviceDefVideo().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain RNG model has to be validated in
qemuValidateDomainRNGDef().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is a Coverity fix pointed out by John in IRC. This code
was introduced in 19d74fdf0e, when the TPM Proxy device for
for ppc64 was introduced.
This will leak in case we have 2 TPMs in the same domain, a
possible scenario with the protected Ultravisor execution in
PowerPC guests.
Fixes: 19d74fdf0e
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduced by commit <22494556542c676d1b9e7f1c1f2ea13ac17e1e3e> which
fixed a CVE.
If the @path passed to virDMSanitizepath() is not a DM name or not a
path to DM name this function could return incorrect sanitized path as
it would always be the first device under /dev/mapper/.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit <2f3b7a5555c4cf4127ff3f8e00746eafcc91432c> replaced VIR_STRDUP
by g_strdup which made the error: path mostly useless.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The issue was introduced together with the function itself by commit
<da1eba6bc8f58bfce34136710d1979a3a44adb17>. Calling
`virDomainObjGetPersistentDef` may return NULL which is later passed
to `virDomainDefFormat` where the `def` attribute is marked as NONNULL
and later in `virDomainDefFormatInternalSetRootName` it is actually
defererenced without any other check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Leftover after commit <479a8c1fa1e0f58d3165c0446cd1abd72160256e>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Libvirt's backup code has two modes:
1) push - where qemu actively writes the difference since the checkpoint
into the output file
2) pull - where we instruct qemu to expose a frozen disk state along
with a bitmap of blocks which changed since the checkpoint
For push mode qemu needs the temporary bitmap we use where we calculate
the actual changes to be present on the block node backing the disk.
For pull mode where we expose the bitmap via NBD qemu actually wants the
bitmap to be present for the exported block node which is the scratch
file.
Until now we've calculated the bitmap twice and installed it both to the
scratch file and to the disk node, but we don't need to since we know
when it's needed.
Pass in the 'pull' flag and decide where to install the bitmap according
to it and also when to register the bitmap name with the blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The NBD server used to export pull-mode backups doesn't have any other
form of client authentication on top of the TLS transport, so the only
way to authenticate clients is to verify their certificate.
Enable this option by defauilt when both 'backup_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The migration stream connection and also the NBD server for non-shared
storage migration don't have any other form of client authentication on
top of the TLS transport, so the only way to authenticate clients is to
verify their certificate.
Enable this option by defauilt when both 'migrate_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Chardevs don't have any other form of client authentication on top of
the TLS transport, so the only way to authenticate clients is to verify
their certificate.
Enable this option by defauilt when both 'chardev_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If both "vnc_tls_x509_verify" and "default_tls_x509_verify" are missing
from the config file the client certificate validation is disabled. VNC
provides a layer of authentication so client certificate validation is
not strictly required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Store whether "default_tls_x509_verify" was provided and enhance the
SET_TLS_VERIFY_DEFAULT macro so that indiviual users can provide their
own default if "default_tls_x509_verify" config option was not provided.
For now we keep setting it to 'false'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Typecast the controller type variable to the appropriate type and add
the missing controller types for future extension.
Note that we currently allow only unplug of
VIR_DOMAIN_CONTROLLER_TYPE_SCSI thus the other controller types which
are not implemented return false now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Iterate through hostdevs only when the controller type is
VIR_DOMAIN_CONTROLLER_TYPE_SCSI.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tests which match the disk bus to the controller type were backwards
in this function. This meant that any disk bus type (such as
VIR_DOMAIN_DISK_BUS_SATA) would not skip the controller index comparison
even if the removed controller was of a different type.
Switch the internals to a switch statement with selects the controller
type in the first place and a proper type so that new controller types
are added in the future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1870072
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it's certainly good to log events like "failed to close fd"
and "tried to close invalid fd", which are likely to be the
consequence of some bug in libvirt, logging a message every single
time a file descriptor is closed successfully is perhaps excessive
and can lead to useful information being missed among the noise.
Log filters don't help in this situation, because filtering out all
of util.file is too big a hammer and would cause important messages
to be left out as well.
To give an idea of just how much noise this single debug statement
can cause, here's a real life example from a quite large libvirtd
log I had to look at recently:
$ grep virFile libvirt.log | wc -l
1307
$ grep virFile libvirt.log | grep -v 'Closed fd' | wc -l
343
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Before commit 24d8968c, virDirClose took a DIR**, and that was never
NULL, so its declaration included ATTRIBUTE_NONNULL(1). Since that
commit, virDirClose takes a DIR*, and it may be NULL (e.g. if the DIR*
is initialized to NULL and was never closed).
Even though virDirClose() is currently only called implicitly (as the
cleanup for a g_autoptr(DIR)), and (as I've just newly learned) the
autocleanup function g_autoptr will only be called if the pointer in
question is non-null (see the definition of
_GLIB_AUTOPTR_CLEAR_FUNC_NAME in
/usr/include/glib-2.0/glib/gmacros.h), it does still cause Coverity to
complain that it *could* be called with a NULL, and it's also possible
that in the future someone might add code that explicitly calls
virDirClose.
To eliminate the Coverity complaints, and protect against the
hypothetical future where someone both explicitly calls virDirClose()
with a potentially NULL value, *and* re-enables the nonnull directive
when not building with Coverity (disabled by commit eefb881) this
patch removes the ATTRIBUTE_NONNULL(1) from the declaration of
virDirClose().
Fixes: 24d8968cd0
Reported-by: John Ferlan <jferlan@redhat.com>
Details-Research-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
A bad merge while rebasing 74b2834333 caused the @event variable
to be defined twice, inside the 'cleanup' label, causing coverity
errors.
This code was originally moved outside of the label by commit
773c7c4361. Delete the unintended code in the 'cleanup'
label.
Fixes: 74b2834333
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After e4c29e2904 the function has one argument more and the
argument that can't be NULL moved from second to third position.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use VIR_AUTOCLOSE with 'fd' and delete the 'cleanup' label.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use g_autoptr() to deprecate the 'cleanup' label.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove obsolete 'cleanup' labels after the changes from the
previous patch.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some labels became deprecated after the previous patches.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Due to failures to unlink on previous rename/undefine we can already have
autolink etc files for the domain to be defined. Remove them.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Let's move objlist restoring to cleanup section so that we can handle failure
of actions between virDomainObjListAdd and virDomainDefSave. We are going
to add such actions in next patch.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If domain name is changed since snapshot we need to update it to current in
config taken from snapshot.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is basically just saves checkpoints metadata on disk after name is changed
in memory as path to domain checkpoints directory depends on name. After that
old checkpoint directory is deleted with checkpoint metadata files.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is basically just saves snapshots metadata on disk after name is changed
in memory as path to domain snapshot directory depends on name. After that
old snapshot directory is deleted with snapshot metadata files.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch also changes functionality a bit.
First if unlinking of old config file is failed we rollback and return error
previously and now we return success. I don't think this makes much difference.
I guess in both cases on libvirtd restart we have to deal with both new and old
config existing on disk with different names but same uuid.
Second if unlinking of old autolink is failed we rollback previously which
was not right as at this point we already unlink old config file. So this
is fixed now.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Going to cleanup label is mere return -1 thus let's just return
instead of goto to this label.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can simplify cleanup section by moving sending events to success path only
because only on sucess path events are not NULL.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For example if saving config file with new name fails we send false undefine
event currently.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some CPUs provide a way to read exact TSC frequency, while measuring it
is required on other CPUs. However, measuring is never exact and the
result may slightly differ across reboots. For this reason both Linux
kernel and QEMU recently started allowing for guests TSC frequency to
fall into +/- 250 ppm tolerance interval around the host TSC frequency.
Let's do the same to avoid unnecessary failures (esp. during migration)
in case the host frequency does not exactly match the frequency
configured in a domain XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1839095
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* use hypervMsvmVSMSModifyResourceSettings()
* improve the error message: say which property it failed to set
* remove usage of VIR_FREE()
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This matches their placement in struct _virHypervisorDriver.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Every time we create new virCommand of OVS_VSCTL it must be
followed by virNetDevOpenvswitchAddTimeout() call which adds the
--timeout=X argument to freshly created cmd. Instead of having
this as two separate function calls it can be just one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two types of vhostuser ports:
dpdkvhostuser - OVS creates the socket and QEMU connects to it
dpdkvhostuserclient - QEMU creates the socket and OVS connects to it
But of course ovs-vsctl syntax for fetching ifname is different.
So far, we've implemented the former. The lack of implementation
for the latter means that we are not detecting the interface name
and thus not reporting it in domain XML, or failing to get
interface statistics.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Although the code in qemuProcessStartValidateTSC works as if the
timer frequency was already unsigned long long (by using an appropriate
temporary variable), the virDomainTimerDef structure actually defines
frequency as unsigned long, which is not guaranteed to be 64b.
Fixes support for frequencies higher than 2^32 - 1 on 32b systems.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add detection of mdev_types capability to channel subsystem devices.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
A qemu guest which has virtiofs config fails to start if the previous
starting failed because of invalid option or something.
That's because the virtiofsd isn't killed by virPidFileForceCleanupPath()
on the former failure because the pidfile was already removed by
virFileDeleteTree(priv->libDir) in qemuProcessStop(), so
virPidFileForceCleanupPath() just returned.
Move qemuExtDevicesStop() before virFileDeleteTree(priv->libDir) so that
virPidFileForceCleanupPath() can kill virtiofsd correctly.
For example of the reproduction:
# virsh start guest
error: Failed to start domain guest
error: internal error: process exited while connecting to monitor: qemu-system-x86_64: -foo: invalid option
... fix the option ...
# virsh start guest
error: Failed to start domain guest
error: Cannot open log file: '/var/log/libvirt/qemu/guest-fs0-virtiofsd.log': Device or resource busy
#
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These functions always return zero, so they might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These functions always return zero, so they might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function only returns zero or aborts, so it might as well be void.
This has the added benefit of simplifying the code that calls it.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function only returns zero or aborts, so it might as well be void.
This has the added benefit of simplifying the code that calls it.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need to pass some flags in order to properly initialize the
connection otherwise it will not work. This copies what GLib does
for g_bus_get_sync() internally.
This fixes an issue with LXC driver where libvirt was not able to
register any VM with machined.
Reported-by: Matthias Maier <tamiko@gentoo.org>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using .path() for an argument to a python script meson will not
setup dependancies on the file. This means that changes to the generator
script will not trigger a rebiuld
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The enum constant names should all have a prefix that matches the enum
name. VIR_DOMAIN_CHECKPOINT_REDEFINE_VALIDATE was missing the "CREATE_"
part of the name prefix.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Verify that the checkpoint requested by an incremental backup exists.
Unfortunately validating whether the checkpoint configuration actually
matches the disk may not be reasonably feasible as the disk may have
been renamed/snapshotted/etc. We still rely on bitmap presence.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Validate that the bitmaps are present when redefining a checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
First one prepares and validates the definition, the second one actually
either updates an existing checkpoint or assigns definition for the new
one.
This will allow driver code to add extra validation between those
steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a flag which will allow users to perform hypervisor-specific
validation when redefining the checkpoint metadata. This will allow
checking metadata which is stored e.g. in disk images when populating
the libvirt metadata.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we don't have a consistent chain of bitmaps for the backup to proceed
we'd report VIR_ERR_INVALID_ARG error code, which makes it hard to
decide whether an incremental backup makes even sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This code will be used to signal cases when the checkpoint is broken
either during backup or other operations where a user might want to make
decision based on the presence of the checkpoint, such as do a full
backup instead of an incremental one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu implementation requires that the VM associated with the
checkpoint is running when checking the size. Mention this possibility
with the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function was basically open-coding it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In testing code we don't properly populate the job sometimes. If it
isn't populated we should not touch it though in the migration cookie
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'qemu_migration_cookie' module uses these. Provide a stable override
for tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Include qemu_domain.h and qemu_domainjob.h as the types from those
headers are used by this header.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virGDBusBusInit is supposed to return a reference to
requested bus type (system/session) or, if non-shared bus is
requested then create a new bus of the type. As an argument, it
gets a double pointer to GError which is passed to all g_dbus_*()
calls which allocate it on failure. Pretty standard approach.
However, since it is a double pointer we must dereference the
first level to see if the value is NULL. IOW:
if (*error)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuMigrationSrcCleanup uses qemuDomainObjDiscardAsyncJob currently. But
discard does not reduce jobs_queued counter so it leaks. Also discard does not
notify other threads that job condition is available. Discard does reset nested
job but nested job is not possible in this conditions.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The only caller of this function ignores failure
and just sets the unique_id to -1.
Failing to read the file is likely to the device no longer
being present, not a real error.
Stop reporting errors in this function.
https://bugzilla.redhat.com/show_bug.cgi?id=1692100
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For functions which have reasonable replacement, let's encourage usage
of g_hash_table_ alternatives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Glib's hash table provides basically the same functionality as our hash
table.
In most cases the only thing that remains in the virHash* wrappers is
NULL-checks of '@table' argument as glib's hash functions don't tolerate
NULL.
In case of iterators, we adapt the existing API of iterators to glibs to
prevent having rewrite all callers at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
We didn't use it rigorously and some helpers even cast it away. Remove
const from all hash utility functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Convert all calls to virHashForEach where it's not obvious that the
callback is _not_ deleting the current element from the hash to
virHashForEachSafe which will be deemed safe to do such operation.
Now that no iterator used with virHashForEach deletes current element we
can document that virHashForEach must not touch the hash table in any
way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
'virHashForEach' historically allowed deletion of the current element as
'virHashRemoveSet' didn't exist. To prevent us from having to deeply
analyse all iterators add virHashForEachSafe which first gets a list of
elements and iterates them outside of the hash table.
This will allow replace the internals of the hash table with other
implementation which don't allow such operation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The simplest way to write tests is to check the output against expected
output, but we must ensure that the output is stable. We can use
virHashForEachSorted as a hash iterator to ensure stable ordering.
This patch fixes 3 instances of hash iteration which is tested in
various parts, including test output changes in appropriate places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Iterate the hash elements sorted by key. This is useful to provide a
stable ordering such as in cases when the output is checked in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
All but one of the callers either use the list in arbitrary order or
sorted by key. Rewrite the function so that it supports sorting by key
natively and make it return the element count. This in turn allows to
rewrite the only caller to sort by value internally.
This allows to remove multiple sorting functions which were sorting by
key and the function will be also later reused for some hash operations
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The remember owner feature uses XATTRs to store original
seclabels. But that means we don't want a regular user to be able
to change what we stored and thus trick us into setting different
seclabel. Therefore, we use namespaces that are reserved to
CAP_SYS_ADMIN only. Such namespaces exist on Linux and FreeBSD.
That also means, that the whole feature is enabled only for
qemu:///system. Now, while the secdriver code is capable of
dealing with XATTRs being unsupported (it has to, not all
filesystems support them) if the feature is enabled users will
get an harmless error message in the logs and the feature
disables itself.
Since we have virSecurityXATTRNamespaceDefined() we can use it to
make a wiser decision on the default state of the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
For seclabel remembering we need to have XATTRs and a special
namespace that is accessibly to CAP_SYS_ADMIN only (we don't want
regular users to trick us into restoring to a different label).
And what qemusecuritytest does is it checks whether we have not
left any path behind with XATTRs or not restored to original
seclabel after setAll + restoreAll round trip. But it can hardly
do so if ran on a platform where there's no XATTR namespace we
can use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are three internal APIs implemented in this security_util
file: virSecurityGetRememberedLabel(),
virSecuritySetRememberedLabel() and
virSecurityMoveRememberedLabel() for getting, setting and moving
remembered seclabel. All three have a special return value of -2
when XATTRs are not supported (for whatever reason) and callers
are expected to handle it gracefully. However, after my commit of
v5.7.0-rc1~115 it may happen that one of the three functions
returned -1 even though XATTRs are not supported (and thus -2
should have been returned).
Fixes: 7cfb7aab57
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit <99d2c6519ad18651b5959fa0a3366bcb2c1e44f3> removed parameter
from the function but did not modified ATTRIBUTE_NONNULL.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This script is intended to help in synchronizing i386 QEMU cpu model
definitions with libvirt.
As the QEMU cpu model definitions are post processed by QEMU and not
meant to be consumed by third parties directly, parsing this
information is imperfect. Additionally, the libvirt models contain
information that cannot be generated from the QEMU data, preventing
fully automated usage. The output should nevertheless be helpful for
a human in determining potentially interesting changes.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The function only returns zero or aborts, so it might as well be void.
This has the added benefit of simplifying the code that calls it.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When restarting libvirt services and sockets *and* libvirt-guests.service
is running, the latter will sometimes hang when trying to connect to
libvirtd. Even though libvirt-guests has 'Wants=libvirtd.service' and
'After=libvirtd.service', we can see via journalctl that it is not
shutdown before libvirtd when executing something like
systemctl try-restart libvirtd.service libvirtd.socket \
libvirtd-ro.socket virtlockd.service virtlockd.socket \
virtlogd.service virtlogd.socket virt-guest-shutdown.target
Oct 28 15:53:31 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:53:31 systemd[1]: libvirtd.service: Succeeded.
Oct 28 15:53:31 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:53:31 systemd[1]: libvirtd-admin.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: libvirtd-ro.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: libvirtd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:53:31 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:53:31 systemd[1]: virtlockd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:53:31 systemd[1]: virtlogd.socket: Succeeded.
Oct 28 15:53:31 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:53:31 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
In this case, the try-restart command hung and libvirt-guests was stuck
trying to connect to libvirtd. In the following case, the try-restart
worked since libvirtd was started again before libvirt-guests was stopped!
Oct 28 15:19:02 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:19:02 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:19:02 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:19:02 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Closed Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:19:02 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:19:02 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:19:02 systemd[1]: Starting Virtualization daemon...
Oct 28 15:19:02 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
Oct 28 15:19:02 systemd[1]: Started Virtualization daemon.
Oct 28 15:19:02 libvirt-guests.sh[4912]: Running guests on default URI: no running guests.
Oct 28 15:19:02 systemd[1]: Stopped Suspend/Resume Running libvirt Guests.
Oct 28 15:19:02 systemd[1]: Stopped target Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Stopping Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Reached target Libvirt guests shutdown.
Oct 28 15:19:02 systemd[1]: Starting Suspend/Resume Running libvirt Guests...
Oct 28 15:19:02 systemd[1]: Started Suspend/Resume Running libvirt Guests.
Adding 'Requires=libvirtd.service' to virt-guest-shutdown.target results
in expected behavior
Oct 28 15:40:00 systemd[1]: Stopping Suspend/Resume Running libvirt Guests...
Oct 28 15:40:00 libvirt-guests.sh[5245]: Running guests on default URI: no running guests.
Oct 28 15:40:00 systemd[1]: Stopped Suspend/Resume Running libvirt Guests.
Oct 28 15:40:00 systemd[1]: Stopped target Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Stopping Virtualization daemon...
Oct 28 15:40:00 systemd[1]: Stopped Virtualization daemon.
Oct 28 15:40:00 systemd[1]: Closed Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Stopping Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Listening on Virtual machine log manager socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Closed Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Stopping Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt local socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt admin socket.
Oct 28 15:40:00 systemd[1]: Listening on Libvirt local read-only socket.
Oct 28 15:40:00 systemd[1]: Closed Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Stopping Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Listening on Virtual machine lock manager socket.
Oct 28 15:40:00 systemd[1]: Starting Virtualization daemon...
Oct 28 15:40:00 systemd[1]: Started Virtualization daemon.
Oct 28 15:40:00 systemd[1]: Reached target Libvirt guests shutdown.
Oct 28 15:40:00 systemd[1]: Starting Suspend/Resume Running libvirt Guests...
Oct 28 15:40:00 systemd[1]: Started Suspend/Resume Running libvirt Guests.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Make use of g_autofree
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move XML formatting code into a new method.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract PCI code from virNodeDevPCICapMdevTypesParseXML to make
method virNodeDevCapMdevTypesParseXML generic for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Extract the XML formatting for mdev_types from PCI capability into
a generic standalone method for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extracting PCI from virNodeDeviceGetPCIMdevTypesCaps creating
virNodeDeviceGetMdevTypesCaps to make later reuse possible.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove mix of array length and error code in the return code.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract virPCIGetMdevTypes from PCI as virMediatedDeviceGetMdevTypes
into mdev for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The nodedev schema defines that a mdev_types capability must have
one or more type elements. The XML parsing and the format allows to
accept and to write mdev_types capability without any type element.
This patches fixes this.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add logic to validate and then pass through 'fmode' and 'dmode' to the
QEMU call.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose QEMU's 9pfs 'fmode' and 'dmode' options via attributes on the
'filesystem' node in the domain XML. These options control the creation
mode of files and directories, respectively, when using
accessmode=mapped.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU 9pfs 'fmode' and 'dmode' options have existed since QEMU 2.10.
Probe QEMU's command line set to check whether these options are
available, and if yes, enable this new QEMU_CAPS_FSDEV_CREATEMODE
capability on libvirt side.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Aleksandr Alekseev <alexander.alekseev@virtuozzo.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Aleksandr Alekseev <alexander.alekseev@virtuozzo.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Function to compare CPU on 64-bits PowerPC is ignoring the flag to avoid failure
in case of CPUs (host and guest) are incompatible. Basically, the function is
returning -1 even if it is set to continue.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that every caller to copyPlacement doesn't pass absolute path there
is no need to have a condition to handle that case.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The old code passed an absolute path to virCgroupNewFromParent() which
is not necessary. The code can take the current placement of parent
cgroup and append a relative path.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virStringSplit() to get the list of directories needed to be
created. This improves readability of the code and stops passing
absolute path to virCgroupNewFromParent().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently this task is done by virCgroupCopyPlacement when the @path
starts with "/".
virCgroupNew is always called with @path starting with "/" and there is
no parent to copy path from. To make it obvious what the code is doing
introduce new helper.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function is relevant only with cgroups v1 where it creates
hierarchy for controllers that are not managed by systemd. PID is used
to detect a placement of current process but in this situation we are
building the hierarchy for already known placement.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current code uses virCgroupNew() as a single point of entry and
calls into virCgroupDetect() as well. Both have logic for several paths
which is difficult to figure out.
Extract the actually used code path from the two functions to make
it obvious what's happening in this case.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current code uses virCgroupNew() as a single point of entry and
calls into virCgroupDetect() as well. Both have logic for several paths
which is difficult to figure out.
Extract the actually used code path from the two functions to make
it obvious what's happening in this case.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is only used for debug and error purposes which can be easily
replaced by @placement.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With cgroups v2 working with controllers is a bit more complicated then
with cgroups v1 where the controller had to be mounted.
There are two files, cgroups.controllers and cgroup.subtree_control.
The file cgroup.controllers lists all controllers enabled in the current
cgroup and cgroups.subtree_control, as the name suggest, controls which
controllers are enabled for a subtree of cgroups.
Now the issue here is that the current code doesn't make any difference
if the @parent variable is NULL or not because ../cgroup.subtree_control
will list the same controllers as ./cgroup.controllers.
The whole point of the @parent variable is when we are building the
cgroup topology ourselves without systemd help we need to detect which
controllers are enabled in the parent cgroup in order to enable them for
the current cgroup as well and for that we need to check
cgroup.controllers of the parent group.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When libvirtd starts a VM it internally stores a path to the main
cgroup. When we restart libvirtd we should get to the same state.
When we start a VM on host with systemd the cgroup is created for us and
the process is already placed into that cgroup and we detect the path
created by systemd using /proc/$PID/cgroup. After that we create
sub-cgroups and move all threads there.
Once libvirtd is restarted we again detect the cgroup path using
/proc/$PID/cgroup, but in this case we will get a different path because
the main thread was moved to a "emulator" cgroup.
Instead of ignoring the "emulator" directory when validating cgroups
remove it completely when detecting cgroup otherwise cgroups will not
work properly when libvirtd is restarted.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With cgroups v2 the file cgroup.procs will never be empty if threading
is enabled as it will always have ID of all processes even if all
threads of the processes are moved to sub-cgroups. If that happens the
file cgroup.threads will be empty.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All other helper processes are moved to cgroup with QEMU emulator
thread as we keep the root VM cgroup without any processes. This
assumption is validated in qemuRestoreCgroupState() which is called
when libvirtd is restarted and reconnected to all running VMs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In both cases priv->cgroup will always be NULL because it is called
before the QEMU process is started and cgroups are configured.
In qemuProcessLaunch() the call order is following:
qemuExtDevicesStart()
...
virCommandRun()
...
qemuSetupCgroup()
where qemuDBusStart() is called from qemuExtDevicesStart() but we
cgroups are created in qemuSetupCgroup().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This should have been included with the upgrade to openwsman 2.6.3.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This places it next to existing related functions.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
* use the same section comment in the header and code
* place the items in the same relative location within the .h and .c
* one parameter per line for multiline function definitions
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After converting all DIR* to g_autoptr(DIR), many cleanup: labels
ended up just having "return ret", and every place that set ret would
just immediately goto cleanup. Remove the cleanup label and its
return, and just return the set value immediately, thus eliminating
the need for the return variable itself.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Once the DIR* in virPCIGetName() was made g_autoptr, the cleanup:
label just had a "return ret;", but the rest of the function was more
compilcated than it needed to be, doing funky things with the value of
ret inside multi-level conditionals and a while loop that might exit
early via a break with ret == 0 or exit early via a goto cleanup with
ret == -1.
It really didn't need to be nearly as complicated. After doing the
trivial replacements of "goto cleanup" with appropriate direct
returns, it became obvious that:
1) the outermost level of the nested conditional at the end of the
function ("if (ret < 0)") was now redundant, since ret is now
*always* < 0 by that point (otherwise the function has returned).
2) by switching the sense of the next level of the conditional (making
it "if (!physPortID)", the "else" (which is now just "return 0;"
becomes the "if", and the new "else" no longer needs to be inside
the conditional.
3) the value of firstEntryName can be moved into *netname with
g_steal_pointer()
Once that is all done, ret is no longer used and can be removed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since every single use of DIR* was converted to use g_autoptr, this
function is not currently needed. Even if someone comes up with a
usage for a non-g_autoptr DIR* in the future, they can just use
virDirClose(), since there is no longer a semantic difference between
the two (VIR_DIR_CLOSE() previously had an extra & on the pointer so
that it could be transparently passed as a DIR** to virDirClose(), but
that was removed several commits back.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This use of DIR* was re-using the same function-scope DIR* each time
through a for loop, and due to multiple error gotos in the loop, it
needed to have the scope of the DIR* reduced to just the loop at the
same time as switching to g_autoptr. That's what this patch does.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In order to make a usable g_autoptr(DIR), we need to have a close
function that is a NOP when the pointer is NULL, but takes a simple
DIR*. But virDirClose() (candidate to be the g_autoptr cleanup
function) currently takes a DIR**, not DIR*. It does this so that it
can clear the pointer, thus making it safe to call virDirClose on the
same DIR multiple times.
In the past the clearing of the DIR* was essential in a few places,
but those few places have now been changed, so we can modify
virDirClose() to take a DIR*, and remove the side effect of clearing
the DIR*. This will make it directly usable as the g_autoptr cleanup,
and will mean that this:
{
DIR *dirp = NULL;
blah blah ...
VIR_DIR_CLOSE(dirp)
}
is functionally identical to
{
g_autoptr(DIR) dirp = NULL;
blah blah ...
}
which will make conversion to using g_autoptr mechanical and simple to review.
(Note that virDirClose() will still check for NULL before attempting
to close, so that it can always be safely called, as long as the DIR*
was initialized to NULL (another prerequisite of becoming a g_autoptr
cleanup function)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
