This function never returns an error, make it void then. And
while at it, make the @src argument const to make it obvious it's
never changed inside the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Compiler isn't able to see that 'virDevMapperGetTargets' in cases e.g.
when the devmapper isn't available may not initialize the value in the
pointer passed as the second argument.
The usage 'qemuDomainSetupDisk' lead to an accidental infinite loop as
previous calls apparently doctored the stack to a point where
'g_slist_concat' would end up in an infinite loop trying to find the end
of the list.
Fixes: 6c49c2ee9fcb88de02cdc333f666a8e95d60a3b0
Closes: https://gitlab.com/libvirt/libvirt/-/issues/268
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The function should be used to check if qemu capabilities include a
hardware acceleration, i.e. accel is not TCG.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It replaces hardcoded checks for KVM. It'll be cleaner to use
the function once multiple accelerators are supported in the
QEMU driver.
Explicit KVM domain checks should be done only when a feature is
available only for KVM.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This makes possible to add more accelerators by touching less code and
reduces code duplication.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There's no QMP command for querying if hvf is supported, therefore we
use sysctl interface that tells if Hypervisor.framework works/available
on the host.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU supports Hypervisor.framework since 2.12 as hvf accel.
Hypervisor.framework provides a lightweight interface to run a virtual
cpu on macOS without the need to install third-party kernel
extensions (KEXTs).
It's supported since macOS 10.10 on machines with Intel VT-x feature
set that includes Extended Page Tables (EPT) and Unrestricted Mode.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virQEMUCapsFormatCache/virQEMUCapsLoadCache adds/reads KVM CPUs to/from
capabilities cache regardless of QEMU_CAPS_KVM. That can cause undesired
side-effects when KVM CPUs are present in the cache on a platform that
doesn't support it, e.g. macOS or Linux without KVM support.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We already know it's not going to be available on other
platforms.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our coding style requires that a body of an if() longer than two
lines is wrapped in a curly braces. There's one offender in
qemuDomainAttachHostPCIDevice(). Fortunately, there was no
functional problem because one of the lines is a comment.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When trying to attach vhost-user-blk device to virtual machine using
qemu < 4.2 libvirt would mistakenly add a scsi=off parameter, which is
not supported by qemu.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/265
Signed-off-by: shenjiatong <yshxxsjt715@gmail.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After previous cleanups, the virDomainHostdevDefParseXMLSubsys()
function uses a mixture of virXMLProp*() and the old
virXMLPropString() + virXXXTypeFromString() patterns. Rework it
so that virXMLProp*() is used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, the virDomainFSDefParseXML() function
uses a mixture of virXMLProp*() and the old virXMLPropString() +
virXXXTypeFromString() patterns. Rework it so that virXMLProp*()
is used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, the virDomainDefParseBootXML() function
uses a mixture of virXMLProp*() and the old virXMLPropString() +
virXXXTypeFromString() patterns. Rework it so that virXMLProp*()
is used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are couple of places where virTristateBoolTypeFromString()
is called. Well, the same result can be achieved by
virXMLPropTristateBool() and on fewer lines.
Note there are couple of places left untouched because those
don't care about error reporting and thus are shorter they way
they are now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both @accel2d and @accel3d are parsed as virTristateBool, but in
a few places (qemuDeviceVideoGetModel() and
qemuValidateDomainDeviceDefVideo()) they are compared to
virTristateSwitch enum either directly or via a variable of that
type. Clear this confusion by using the correct enum.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
During validation of a virDomainFSDef QEMU capabilities are check
for multidevs support if the FS definition has it enabled.
However, the fs->multidevs is really type of virDomainFSMultidevs
but is compared against virDomainFSModel enum. Fortunately, both
values are the same so no user visible harm done here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 938382b60ae5bd1f83b5cb09e1ce68b9a88f679a.
Turns out, the commit did more harm than good. It changed
semantics on some public APIs. For instance, while
qemuDomainGetInfo() previously did not returned an error it does
now. While the calls to virProcessGetStatInfo() is guarded with
virDomainObjIsActive() it doesn't necessarily mean that QEMU's
PID is still alive. QEMU might be gone but we just haven't
realized it (e.g. because the eof handler thread is waiting for a
job).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2041610
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The commit splitting out the qemuSnapshotRevertInactive function
dropped the 'defined = true' line by accident and instead
returned -1, leaving the user with a cryptic error:
error: An error occurred, but the cause is unknown
https://bugzilla.redhat.com/show_bug.cgi?id=2039136https://gitlab.com/libvirt/libvirt/-/issues/266
Fixes: 85e4a13c3f19078fb6af5ffb4a80022c142cbc7e
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Only QXL and virtio-vga actually propagate the 'heads' attribute as
'max_outputs' to the commandline of qemu. Reject the setting when
non-default value is used for any other video type.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2036300
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Subsequent patch will use the same condition so move the primary device
check into a nested condition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since there's no capability to check now, we can simply move the
formatting of 'max_outputs' earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both are supported by qemu-2.11 and later, so we don't have to check for
them explicitly.
Note that QXL is supported only on x86_64, thus on other arches only the
capability for 'virtio-gpu' is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both the QXL video device and 'virtio' video device support
'max_outputs' in all qemu versions libvirt supports. This means we no
longer have to check the QEMU_CAPS_QXL_MAX_OUTPUTS and
QEMU_CAPS_VIRTIO_GPU_MAX_OUTPUTS capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the now unused 'driver' parameter, as well as the pointless
if (ret == 0) comparison which is always true after removing the
cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Its only use was to check conflicts of the sgio attributes between
devices shared with other domains.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that the 'unfiltered' attribute is rejected by the validator,
remove all the code that deals with the feature.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
unpriv_sgio was a downstream-only feature in RHEL 6-8.
The libvirt support was merged upstream by mistake.
Remove the function that constructs the sysfs path and assume it
does not exist in all the callers.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
virtio-input is virtio-1.0 only and these models have been only present
in one upstream QEMU release, then removed by:
commit d923e30578a65392e50e530e3a29b2edf5c51c5b
virtio-input-host-pci: cleanup types
https://bugzilla.redhat.com/show_bug.cgi?id=1745868
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This device was virtio 1.0-only so adding the (non-)transitional model
did not make sense and it was only present in QEMU 4.0.
Report a validation error for both of the users that will ever hit this
code path.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The (non-)transitional version of this device was only present in
one upstream QEMU release (4.0), then removed by:
commit d923e30578a65392e50e530e3a29b2edf5c51c5b
virtio-input-host-pci: cleanup types
Remove them from probing as well, since they are unlikely to be found.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Otherwise we'll keep using the new pinning value even if it can't be
applied to the thread.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2040555
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The bitmap recorded in the live/persistent definition was re-parsed two
more times. We can copy it which is cheaper and less verbose.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.
Remove the sysconfig file and place the current desired default into
the service file.
Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf
Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that qemu fixed device unplug when JSON syntax is used with -device
we can re-enable the feature.
Since the old capability string representation is condemned by
suggesting filtering it as a workaround we must introduce a new string.
To achieve this the original capability position is renamed to
X_QEMU_CAPS_DEVICE_JSON_BROKEN_HOTPLUG and a new position with the
original name QEMU_CAPS_DEVICE_JSON is introduced to prevent us having
to change the rest of the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuFirmwareOSInterfaceTypeFromOsDefFirmware method
was added to convert from virDomainOsDefFirmware to the
qemuFirmwareOSInterface enum.
It was later also used to convert from virDomainLoader
to qemuFirmwareOSInterface in:
commit 8e1804f9f66f13ca1412d22bf1a957b6d55a2365
Author: Michal Prívozník <mprivozn@redhat.com>
Date: Tue Dec 17 17:45:50 2019 +0100
qemu_firmware: Try to autofill for old style UEFI specification
This caused compile errors with clang due to passing a
mis-matched enum type. These were later silenced by
stripping the enum types:
commit 8fcee47807d29008632a7ad918cbe93ac0a20597
Author: Michal Prívozník <mprivozn@redhat.com>
Date: Wed Jan 8 09:42:47 2020 +0100
qemu_firmware: Accept int in qemuFirmwareOSInterfaceTypeFromOsDefFirmware()
This is still rather confusing to humans reading the
code. It is clearer to just define a separate helper
method for the virDomainLoader type conversion.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
'virDomainSnapshotRedefinePrep' does everything needed for a redefine
when the snapshot exists but not when we are defining metadata for a new
snapshot. This gives us weird semantics.
Extract the code for replacing the definition of an existing snapshot
into a new helper 'virDomainSnapshotReplaceDef' and refactor all
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than callers second-guessing when the snapshot definition is
assigned turn it into a double pointer and clear it on success.
Fix callers to work with the new semantics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the variable holding the snapshot definition into the loop and use
automatic clearing for it. Adjust the code for parity.
Note that the clearing of 'snapdef' on success of
'virDomainSnapshotAssignDef' will be refactored in upcoming patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As with qemuSnapshotRedefine, make an extra reference in a temporary
autocleaned variable and use that instead of refing the definition after
it's stolen.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Due to historical reasons we allow users to redefine an existing
snapshot without providing the domain definition which would correspond
to it. In such case we'd use the domain definition from the snapshot
that is being redefined.
To prevent callers from doing complex moving of the domain definition
object back and forth between the snapshot definitions we can add an
argument to virDomainSnapshotAlignDisks which will allow us to pass in
the alternate definition if the one from the snapshot is missing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'require_match' set to true is only needed for internal snapshots taken
by hypervisors (qemu) which don't have a way to control which disks take
part in the snapshot (savevm).
To de-clutter callers we can change the argument to mean 'this code path
requires uniform snapshot for internal snapshots'.
Change the argument and fix the callers. For now all callers pass 'true'
but any new hypervisor or even usage in qemu is not going to share the
limitation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the appropriate type for the variable and fix all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
VM XML accepts target.port but this does not get passed while
building the QEMU command line for this VM.
Signed-off-by: Divya Garg <divya.garg@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>