We might as well take advantage of viralloc.h instead of open-coding
array management ourselves. While at it, I simplified several
places that were doing repetitive pointer chasing to use an
intermediate variable for legibility (some other places remain,
but they will disapper in later refactoring patches).
* src/conf/object_event_private.h (_virObjectEventCallbackList):
Use size_t for count.
* src/conf/object_event.c (_virObjectEventQueue): Likewise.
(virObjectEventCallbackListRemoveID): Use VIR_DELETE_ELEMENT.
(virObjectEventQueuePush, virObjectEventCallbackListAddID): Use
VIR_APPEND_ELEMENT.
(virObjectEventCallbackListEventID)
(virObjectEventStateDispatchCallbacks): Simplify code.
Signed-off-by: Eric Blake <eblake@redhat.com>
No need to use an int that only ever stores 0 and 1.
* src/conf/object_event_private.h (_virObjectEventCallback):
Change deleted to bool.
* src/conf/object_event.c (virObjectEventDispatchMatchCallback):
Switch return type to bool.
(virObjectEventCallbackListMarkDeleteID): Update client.
* src/conf/domain_event.c (virDomainEventCallbackListMarkDelete):
Likewise.
Do not leave the PCI address of the primary video card set
to the legacy default (0000:00:02.0) if we're doing two-pass
allocation.
Since QEMU 1.6 (QEMU_CAPS_VIDEO_PRIMARY) we allow the primary
video card to be on other slots than 0000:00:02.0 (as we use
-device instead of -vga).
However we fail to assign it an address if:
* another device explicitly uses 0000:00:02.0 and
* the primary video device has no address specified
On the first pass, we have set the address to default, then checked
if it's available, leaving it set even if it wasn't. This address
got picked up by the second pass, resulting in a conflict:
XML error: Attempted double use of PCI slot 0000:00:02.0
(may need "multifunction='on'" for device on function 0)
Also fix the test that was supposed to catch this.
We weren't very consistent in our use of VIR_ERR_NO_SUPPORT; many
users just passed __FUNCTION__ on, while others passed "%s" to
silence over-eager compilers that warn about __FUNCTION__ not
containing any %. It's nicer to route all these uses through
a single macro, so that if we ever need to change the reporting,
we can do it in one place.
I verified that 'virsh -c test:///default qemu-monitor-command test foo'
gives the same error message before and after this patch:
error: this function is not supported by the connection driver: virDomainQemuMonitorCommand
Note that in libvirt.c, we were inconsistent on whether virDomain*
API used virLibConnError() (with VIR_FROM_NONE) or virLibDomainError()
(with VIR_FROM_DOMAIN); this patch unifies these errors to all use
VIR_FROM_NONE, on the grounds that it is unlikely that a caller
learning that a call is unimplemented can do anything in particular
with extra knowledge of which error domain it belongs to.
One particular change to note is virDomainOpenGraphics which was
trying to fail with VIR_ERR_NO_SUPPORT after a failed
VIR_DRV_SUPPORTS_FEATURE check; all other places that fail a
feature check report VIR_ERR_ARGUMENT_UNSUPPORTED.
* src/util/virerror.h (virReportUnsupportedError): New macro.
* src/libvirt-qemu.c: Use new macro.
* src/libvirt-lxc.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/security/security_manager.c: Likewise.
* src/util/virinitctl.c: Likewise.
* src/libvirt.c: Likewise.
(virDomainOpenGraphics): Use correct error for unsupported feature.
Signed-off-by: Eric Blake <eblake@redhat.com>
Having one API call into another is generally not good; among
other issues, it gives confusing logs, and is not quite as
efficient.
This fixes several instances, but not all: we still have instances
in both libvirt.c and in backend hypervisors (lxc and qemu) calling
the public virTypedParamsGetString and friends, which dispatch
errors immediately. I'm not sure if it is worth trying to clean
that up in a separate patch (such a cleanup may be easiest by
separating the public function into a wrapper around the internal,
then tweaking internal.h so that internal users directly use the
internal function).
* src/libvirt.c (virDomainGetUUIDString, virNetworkGetUUIDString)
(virStoragePoolGetUUIDString, virSecretGetUUIDString)
(virNWFilterGetUUIDString): Avoid nested public API call.
* src/util/virtypedparam.c (virTypedParamsReplaceString): Don't
dispatch errors here.
(virTypedParamsGet): No need to reset errors.
(virTypedParamsGetBoolean): Use consistent ordering.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1036248
Incorrect usage of virAsprintf. vmware-vmx reports version
information to stderr, at least for OS X 10.9.1.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any file with access to object_event_private.h also has access to
the internals of virObjectEvent, without needing an accessor
function. Not to mention the accessor function was doing type
checks that would always succeed.
* src/conf/object_event_private.h (virObjectEventGetEventID): Drop.
* src/conf/object_event.c (virObjectEventGetEventID): Drop.
(virObjectEventDispatchMatchCallback): Simplify caller.
* src/conf/domain_event.c (virDomainEventDispatchDefaultFunc):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
While working on events, I found a number of minor issues; I'm
hoisting these to the front rather than doing it piecemeal in
the patches where I first noticed bad or missing documentation.
* src/conf/object_event.c: Fix grammar, document all parameters
of public functions, wrap some long lines.
* src/conf/object_event.h: Likewise.
* src/conf/network_event.c: Likewise.
* src/conf/domain_event.c: Likewise (except for the large number
of event creation functions).
* src/libvirt_private.cyms (conf/object_event.h): Split...
(conf/network_event.h): ...to account for new file.
Signed-off-by: Eric Blake <eblake@redhat.com>
We document that calling any public API wipes out all prior
libvirt errors in the same thread; but weren't obeying this
style in a few functions.
There are a couple of nested uses of virConnectRef (in lxc
and qemu reboot paths), but they should not be affected by
this change in semantics since there should not be any
previous error getting nuked (a later patch will clean up
the nested calls, along with abuse of virConnectClose on
cleanup paths which DOES nuke errors).
* src/libvirt.c (virGetVersion, virConnectRef, virDomainRef)
(virDomainGetSecurityLabel, virDomainGetSecurityLabelList)
(virDomainSetMetadata, virDomainGetMetadata)
(virNodeGetSecurityModel, virNetworkRef, virInterfaceRef)
(virStoragePoolRef, virStorageVolRef, virNodeDeviceGetName)
(virNodeDeviceRef, virSecretRef, virStreamRef, virNWFilterRef)
(virDomainSnapshotRef): Reset error on entrance.
(do_open): Drop redundant error reset.
* src/libvirt-qemu.c (virDomainQemuAgentCommand): Likewise.
* src/libvirt-lxc.c (virDomainLxcEnterNamespace)
(virDomainLxcEnterSecurityLabel): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
While auditing error messages in libvirt.c, I found a couple
instances that had not been converted to modern error styles,
and a few places that failed to dispatch the error through
the known-good connection.
* src/libvirt.c (virDomainPinEmulator, virDomainGetDiskErrors)
(virDomainSendKey, virDomainGetSecurityLabelList)
(virDomainGetEmulatorPinInfo): Use typical error reporting.
(virConnectGetCPUModelNames, virConnectRegisterCloseCallback)
(virConnectUnregisterCloseCallback, virDomainGetUUID): Report
error through connection.
Signed-off-by: Eric Blake <eblake@redhat.com>
Style only. In particular, the message on "flags 'affect live'
and 'affect config'" being mutually exclusive was already split
in some instances.
* src/libvirt.c: Wrap some long error messages to fit in 80 columns.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our public APIs emit a debug log on entry, prior to anything
else. There were a few exceptions where obvious failures were not
logged, so fix those. When moving a debug earlier, this patch also
makes sure to avoid any NULL dereference during the log (the APIs
are supposed to gracefully fail if the user passes NULL for the object).
However, do NOT use VIR_DEBUG prior to virInitialize, since setting
up the error reporting can change where VIR_DEBUG output would be
routed. Instead add documentation to virGlobalInit, virInitialize,
and virGetVersion that better explains initialization.
* src/libvirt.c (virGetVersion, virConnectRef, virDomainRef)
(virNetworkRef, virInterfaceRef, virStoragePoolRef)
(virStorageVolRef, virNodeDeviceRef, virSecretRef, virStreamRef)
(virNWFilterRef, virDomainSnapshotRef): Debug on function entry.
* src/libvirt-lxc.c (virDomainLxcEnterNamespace)
(virDomainLxcEnterSecurityLabel): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
I noticed that the virDomainQemuMonitorCommand debug output wasn't
telling me the name of the domain it was working on. While it was
easy enough to determine which pointer matches the domain based on
other log messages, it is nicer to be consistent.
* src/util/viruuid.h (VIR_UUID_DEBUG): Moved here from...
* src/libvirt.c (VIR_UUID_DEBUG): ...here.
(VIR_ARG15, VIR_HAS_COMMA, VIR_DOMAIN_DEBUG_EXPAND)
(VIR_DOMAIN_DEBUG_PASTE, VIR_DOMAIN_DEBUG_0, VIR_DOMAIN_DEBUG_1)
(VIR_DOMAIN_DEBUG_2, VIR_DOMAIN_DEBUG): Move...
* src/datatypes.h: ...here.
* src/libvirt-qemu.c (virDomainQemuMonitorCommand)
(virDomainQemuAgentCommand): Better debug messages.
* src/libvirt-lxc.c (virDomainLxcOpenNamespace): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Preliminary cleanups to make search-and-replace easier in later
patches. Many of these were done by grepping for (multiline)
pattern violations, then bundled all into one patch.
* src/libvirt.c: Uniform two spaces between functions, return
type and open brace on separate line, avoid blank lines around
open brace, label in column 1, drop redundant (), consistent
indentation for function headers split across lines.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since libvirt 0.9.3, the entire virevent.c file has been a public
API, so improve the documentation in this file. Also, fix a
potential core dump - it could only be triggered by bogus use of
the API and would only affect the caller (not libvirtd), but we
might as well be nice.
* src/libvirt.c (virConnectSetKeepAlive)
(virConnectDomainEventRegister, virConnectDomainEventRegisterAny)
(virConnectNetworkEventRegisterAny): Document event loop requirement.
* src/util/virevent.c (virEventAddHandle, virEventRemoveHandle)
(virEventAddTimeout, virEventRemoveTimeout): Likewise.
(virEventUpdateHandle, virEventUpdateTimeout): Likewise, and avoid
core dump if caller didn't register handler.
(virEventRunDefaultImpl): Expand example, and set up code block in
html docs.
(virEventRegisterImpl, virEventRegisterDefaultImpl): Document more
on the use of the event loop.
Signed-off-by: Eric Blake <eblake@redhat.com>
Prior to this patch, an attempt to register an event without an
event loop started results in the vague:
libvirt: Remote Driver error : adding cb to list
Now it gives the much nicer:
libvirt: error : internal error: could not initialize domain event timer
This also avoids hiding other reasonable error messages, such as
attempts to register a duplicate callback or OOM errors.
* src/remote/remote_driver.c (remoteConnectNetworkEventRegisterAny)
(remoteConnectDomainEventRegister)
(remoteConnectDomainEventRegisterAny): Preserve more detailed error.
Signed-off-by: Eric Blake <eblake@redhat.com>
On AArch64 the kernel prints one "processor" (lower case 'p') line per
core. As this was missing from the test data, virSysinfo was not
parsing any processors at all.
Fix the test data so the test now passes.
'make syntax-check' wants a newer gnulib for 2014 copyright.
Also, a couple of fixes for bootstrap issues reported on IRC:
- on some older glibc systems, ./configure could deadlock due to
a glibc malloc bug
- on FreeBSD systems, a broken autom4te coupled with gettext
0.18.3 prevents bootstrap; we can't work around it, but can at
least inform the user why they have a problem
And as always, portability fixes in other modules, some of which
are used by libvirt.
* .gnulib: Update to latest, in part for bootstrap improvements,
and for the new year.
* bootstrap: Resync to gnulib.
* gnulib/local/m4/ssize_t.m4.diff: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit eb70ceb tried to create a code block for
libvirt-libvirt.html#virConnectGetType, but failed to note
that our doc generator treats everything after "Returns" as
part of the return description rather than looking for
paragraph and code layout. Fix some other API that also had
generic details crammed into the return type paragraph.
* src/libvirt.c (virConnectOpen, virConnectOpenReadOnly)
(virConnectOpenAuth, virConnectListAllDomains): Fit doc pattern.
Signed-off-by: Eric Blake <eblake@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1046337
The <driver> name attribute of an interface is interpreted in two
different ways depending on the <interface> type - if the interface is
type='hostdev', then the driver name describes which backend to use
for the hostdev device assignment (vfio or kvm), but if the interface
is any emulated type *and* the model type is "virtio", then the driver
name can be "vhost" or "qemu", telling which backend qemu should use
to communicate with the emulated device.
The problem comes when someone has defined a an interface like this
(which is accepted by the parser as long as no <driver name='xxx'/> is
specified):
<interface type='hostdev'>
...
<model type='virtio'/>
...
</interface>
As libvirt storing this definition in the domain's status, the driver
name is automatically filled in with the backend that was
automatically decided by libvirt, so it stores this in the status:
<interface type='hostdev'>
...
<driver name='vfio'/>
...
<model type='virtio'/>
...
</interface>
This isn't noticed until the next time libvirtd is restarted - as it
is reading the status of all domains, it encounters the above
interface definition, logs an error:
internal error: Unknown interface <driver name='vfio'> has been specified
and fails to reload the domain status, so the domain is marked as
inactive.
The solution is to stop the parser from interpreting <driver>
attributes as if the device was an emulated virtio device, when it is
actually a hostdev.
(Although the bug has existed since vfio support was added, it has
just recently become more apparent because libvirt previously didn't
automatically set the driver name for hostdev interfaces in the domain
status to vfio/kvm as it does since commit f094aa, first appearing in
v1.1.4.)
Similar to commit 52dbeac, we should indent code snippets in
other places to ensure they appear correctly in html. See
http://libvirt.org/html/libvirt-libvirt.html#virNodeGetCPUStats
for an example improved by this patch. Also fix some missing
semicolons in the examples.
* src/libvirt.c: Indent code samples in comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1044806
Currently, sending the ANSI_A keycode from os_x codepage doesn't work as
it has a special value of 0x0. Our internal code handles that no
different to other not defined keycodes. Hence, in order to allow it we
must change all the undefined keycodes from 0 to -1 and adapt some code
too.
# virsh send-key guestname --codeset os_x ANSI_A
error: invalid keycode: 'ANSI_A'
# virsh send-key guestname --codeset os_x ANSI_B
# virsh send-key guestname --codeset os_x ANSI_C
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the @flags usage is a bit unclear at first sight to say the
least. There's no need for such unclear code especially when we can
borrow the working code from qemuDomainShutdownFlags().
In addition, this fixes one bug too. If user requested both
VIR_DOMAIN_SHUTDOWN_INITCTL and VIR_DOMAIN_SHUTDOWN_SIGNAL at the same
time, he is basically saying: 'Use the force Luke! If initctl fails try
sending a signal.' But with the current code we don't do that. If
initctl fails for some reason (e.g. inability to write to /dev/initctl)
we don't try sending any signal but fail immediately. To make things
worse, making a domain shutdown with bare _SIGNAL was working by blind
chance of a @rc variable being placed at correct place on the stack so
its initial value was zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=956994
Currently, it is possible to start an interface that is already running:
# virsh iface-start eth2
Interface eth2 started
# echo $?
0
# virsh iface-start eth2
Interface eth2 started
# echo $?
0
# virsh iface-start eth2
Interface eth2 started
# echo $?
0
Same applies for destroying a dead interface. We should not allow such
state transitions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When registering a close callback, the connection refcount is increased
as the connection object is passed to the callback and hence we must
prevent deleting it too soon. However, when closing the connection, the
connection object is just unrefed. So whenever a connection with a close
callback is closed, we end up with the connection object which has
exactly one reference. Leaving the code as-is doesn't mean the end of
the world as we know it, but why give a bad example?
==14531== 288 bytes in 1 blocks are still reachable in loss record 695 of 762
==14531== at 0x4C2BDE4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==14531== by 0x4E9FE09: virAllocVar (viralloc.c:558)
==14531== by 0x4EDBE45: virObjectNew (virobject.c:190)
==14531== by 0x4F71AAC: virGetConnect (datatypes.c:116)
==14531== by 0x4F78511: do_open (libvirt.c:1136)
==14531== by 0x4F7B3AC: virConnectOpenAuth (libvirt.c:1481)
==14531== by 0x4011D2: main (event-test.c:499)
(and other leaks tied to virGetConnect())
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This partially reverts 5eb4b04211 and 62774afb6b.
Rewrite the domsuspend example from scratch. This time do it right.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
By actually removing the <vcpupin> element (from within the
<cputune> section) from the XML, rather than jus update it with
a fully set vcpu affinity mask.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
And use it to implement libxlDomainPinVcpu(), similarly to what
happens in the QEMU driver. This way, it is possible to both
query and change the vcpu affinity of a persistent but not
running domain.
In face, before this patch, we have:
# virsh list --all
Id Name State
----------------------------------------------------
5 debian_32 running
- fedora20_64 shut off
# virsh vcpupin fedora20_64 0 2-4 --current
error: this function is not supported by the connection driver: virDomainPinVcpuFlags
After (same situation as above):
# virsh vcpupin fedora20_64 0 2-4 --current
# virsh vcpupin fedora20_64 0
VCPU: CPU Affinity
----------------------------------
0: 2-4
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
So that it is possible to query vcpu related information of
a persistent but not running domain, like it is for the QEMU
driver.
In fact, before this patch, we have:
# virsh list --all
Id Name State
----------------------------------------------------
5 debian_32 running
- fedora20_64 shut off
# virsh vcpuinfo fedora20_64
error: this function is not supported by the connection driver: virDomainGetVcpuPinInfo
After (same situation as above, i.e., fedora20_64 not running):
# virsh vcpuinfo fedora20_64
VCPU: 0
CPU: N/A
State: N/A
CPU time N/A
CPU Affinity: yyyyyyyy
VCPU: 1
CPU: N/A
State: N/A
CPU time N/A
CPU Affinity: yyyyyyyy
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
I noticed a few odd things in 'virt-login-shell --help' output.
* tools/virt-login-shell.c (usage): At most one option accepted,
drop trailing colon.
Signed-off-by: Eric Blake <eblake@redhat.com>
On openSUSE 12.x with GNUTLS 3.0.28, virnettlscontexttest fails. It has
been reported to work from GNUTLS 3.1.11 on Fedora 19. Changed the
constraints on gnutls to 3.1+ for unit test cacert4req.
Signed-off-by: Eric Blake <eblake@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1045002
If a domain has an <interface type='hostdev'> or an <interface
type='network'> where the network itself is a pool of hostdev devices,
then libvirt will internally keep that device on both the interface
list *and* the hostdev list for the domain. One of the places this
comes in handy is when a new device is being added and libvirt wants
to find a unique "alias" name for it - it just scans through the
hostdev array and makes sure it picks a name that doesn't match the
alias of any device in that array.
However, when libvirtd was restarted, if there was an <interface
type='network'> with the network being a hostdev pool, the device
would not be added to the reconstructed internal hostdev array, so its
alias would not be found during a scan of the hostdev array, thus
attempts to add a new hostdev (or <interface type='hostdev'> or
<interface type='network'>) would result in a message like this:
internal error: unable to execute QEMU command 'device_add':
Duplicate ID 'hostdev0' for device
This patch simply fixes the existing code in the domain XML parser
that fixes up the hostdev array in the case of <interface
type='hostdev'> to do the same thing in the case of <interface
type='network'> with a hostdev network.
This bug has existed since the very first addition of hostdev networks
to libvirt (0.10.0).
This eliminates the misleading error message that was being logged
when a vfio hostdev hotplug failed:
error: unable to set user and group to '107:107' on '/dev/vfio/22':
No such file or directory
as documented in:
https://bugzilla.redhat.com/show_bug.cgi?id=1035490
Commit ee414b5d (pushed as a fix for Bug 1016511 and part of Bug
1025108) replaced the single call to
virSecurityManagerSetHostdevLabel() in qemuDomainAttachHostDevice()
with individual calls to that same function in each
device-type-specific attach function (for PCI, USB, and SCSI). It also
added a corresponding call to virSecurityManagerRestoreHostdevLabel()
in the error handling of the device-type-specific functions, but
forgot to remove the common call to that from
qemuDomainAttachHostDevice() - this resulted in a duplicate call to
virSecurityManagerRestoreHostdevLabel(), with the second occurrence
being after (e.g.) a PCI device has already been re-attached to the
host driver, thus destroying some of the device nodes / links that we
then attempted to re-label (e.f. /dev/vfio/22) and generating an error
log that obscured the original error.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1035490
virProcessSetMaxMemLock() (which is a wrapper over prlimit(3)) expects
the memory size in bytes, but libvirt's domain definition (which was
being used by qemuDomainAttachHostPciDevice()) stores all memory
tuning parameters in KiB. This was being accounted for when setting
MaxMemLock at domain startup time (so cold-plugged devices would
work), but not for hotplug.
This patch simplifies the few lines that call
virProcessSetMemMaxLock(), and multiply the amount * 1024 so that
we're locking the correct amount of memory.
What remains a mystery to me is why hot-plug of a managed='no' device
would succeed (at least on my system) while managed='yes' would
fail. I guess in one case the memory was coincidentally already
resident and in the other it wasn't.
there is a segfault in libxl logging in libxl_ctx_free when domain
create fail. because the log output handler vmessage is freed by
xtl_logger_destroy before libxl_ctx_free in virDomainObjListRemove.
move xtl_logger_destroy after libxl_ctx_free could fix this bug.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
by, in libxlDomainGetNumaParameters(), calling libxl_bitmap_init() as soon as
possible, which avoids getting to 'cleanup:', where libxl_bitmap_dispose()
happens, without having initialized the nodemap, and hence crashing after some
invalid free()-s:
# ./daemon/libvirtd -v
*** Error in `/home/xen/libvirt.git/daemon/.libs/lt-libvirtd': munmap_chunk(): invalid pointer: 0x00007fdd42592666 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x7bbe7)[0x7fdd3f767be7]
/lib64/libxenlight.so.4.3(libxl_bitmap_dispose+0xd)[0x7fdd2c88c045]
/home/xen/libvirt.git/daemon/.libs/../../src/.libs/libvirt_driver_libxl.so(+0x12d26)[0x7fdd2caccd26]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(virDomainGetNumaParameters+0x15c)[0x7fdd4247898c]
/home/xen/libvirt.git/daemon/.libs/lt-libvirtd(+0x1d9a2)[0x7fdd42ecc9a2]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(virNetServerProgramDispatch+0x3da)[0x7fdd424e9eaa]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0x1a6f38)[0x7fdd424e3f38]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa81e5)[0x7fdd423e51e5]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa783e)[0x7fdd423e483e]
/lib64/libpthread.so.0(+0x7c53)[0x7fdd3febbc53]
/lib64/libc.so.6(clone+0x6d)[0x7fdd3f7e1dbd]
Signed-off-by: Dario Faggili <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain> --hard-limit 133T'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 26826)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf718) at util/vircgroup.c:1764
#1 0x00007ffff70e9206 in virCgroupSetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffe409f360 "1073741824")
at util/vircgroup.c:669
#2 0x00007ffff70e98b4 in virCgroupSetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=1073741824) at util/vircgroup.c:740
#3 0x00007ffff70ee518 in virCgroupSetMemory (group=0x0, kb=1048576) at util/vircgroup.c:1904
#4 0x00007ffff70ee675 in virCgroupSetMemoryHardLimit (group=0x0, kb=1048576)
at util/vircgroup.c:1944
#5 0x00005555557d54c8 in lxcDomainSetMemoryParameters (dom=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at lxc/lxc_driver.c:774
#6 0x00007ffff72c20f9 in virDomainSetMemoryParameters (domain=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at libvirt.c:4051
#7 0x000055555561365f in remoteDispatchDomainSetMemoryParameters (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510)
at remote_dispatch.h:7621
#8 0x00005555556133fd in remoteDispatchDomainSetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510,
ret=0x7fffe40b84f0) at remote_dispatch.h:7591
#9 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:435
#10 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:305
#11 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ec4b10,
prog=0x555555ec3ae0, msg=0x555555eb94e0) at rpc/virnetserver.c:165
#12 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ec3e30, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#13 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#14 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#15 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#16 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain>'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 13387)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf750) at util/vircgroup.c:1764
#1 0x00007ffff70e958c in virCgroupGetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf7c0) at util/vircgroup.c:705
#2 0x00007ffff70e9d29 in virCgroupGetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf810) at util/vircgroup.c:804
#3 0x00007ffff70ee706 in virCgroupGetMemoryHardLimit (group=0x0, kb=0x7fffec8bf8a8)
at util/vircgroup.c:1962
#4 0x00005555557d590f in lxcDomainGetMemoryParameters (dom=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at lxc/lxc_driver.c:826
#5 0x00007ffff72c28d3 in virDomainGetMemoryParameters (domain=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at libvirt.c:4137
#6 0x000055555563714d in remoteDispatchDomainGetMemoryParameters (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote.c:1895
#7 0x00005555556052c4 in remoteDispatchDomainGetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote_dispatch.h:4050
#8 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:435
#9 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:305
#10 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ebaef0,
prog=0x555555ec3ae0, msg=0x555555ebb3e0) at rpc/virnetserver.c:165
#11 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ebc7e0, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#12 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#13 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#14 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#15 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While looking at event code, I noticed that the documentation was
trying to refer me to functions that don't exist. Also fix some
typos and poor formatting.
* src/libvirt.c (virConnectDomainEventDeregister)
(virConnectDomainEventRegisterAny)
(virConnectDomainEventDeregisterAny)
(virConnectNetworkEventRegisterAny)
(virConnectNetworkEventDeregisterAny): Link to correct function.
* include/libvirt.h.in (VIR_DOMAIN_EVENT_CALLBACK)
(VIR_NETWORK_EVENT_CALLBACK): Likewise.
(virDomainEventID, virConnectDomainEventGenericCallback)
(virNetworkEventID, virConnectNetworkEventGenericCallback):
Improve docs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 6cd60b6 was flat out broken - it tried to print into the
wrong variable. My testing was obviously too cursory (did the
name get a slash added?); valgrind would have caught the error.
Thankfully it didn't hit any release.
Reported by Peter Krempa.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Fix bogus code.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_WARNINGS_NO_CAST_ALIGN / VIR_WARNINGS_RESET should
not have any trailing ';' since they are pragmas. The use
of a ';' results in an empty statement which confuses CIL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
D-bus introduced some changes in its locking code. Overriding the init
function skips the new locking init and thus crashes later in libvirt
test. Removing the function makes the test pass again.
Move the code around so that the forward declaration isn't needed. Also
fix code style of the opening brace of the function by moving it to a
separate line.
