Introduce libxlDomainStartPerform as part of decomposing libxlDomainStart.
Perform all operations that are part of starting a domain. On error the
domain is destroyed from libxl's perspective, but the operations perfomed
in libxlDomainStartPrepare must be unwound by libxlDomainStart.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce libxlDomainStartPrepare as part of decomposing libxlDomainStart.
Perform all prepratory operations such as hostdevs, network devs, etc.
Also ensure all such operations are properly unwound on error.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move network device cleanup code from libxlDomainCleanup to a helper
function for use in a subsequent patch.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
the logic to check for existence of a managed save image and use it to
start the VM can be moved to libxlDomainStartNew. libxlDomainStart has
become unwieldy and this is a small step to make it more manageable.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the minimum supported Xen version has bumped to 4.9, all
uses of LIBXL_HAVE_* that are included in Xen 4.9 can be removed
from the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Memory on a NUMA node can have a side caches. Configuring these
for a domain was implemented in v6.6.0-rc1~249 and friends.
However, up until now mgmt applications did not really know what
values to pass because we were not exposing caches of the host.
With recent enough kernel these are exposed under sysfs and with
a bit of parsing we can extend our capabilities XML. The sysfs
structure is documented in kernel's
Documentation/admin-guide/mm/numaperf.rst and basically maps in
1:1 fashion to our virNumaCache structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Xen only supports one firmware, making autoselection easy to implement.
In fact, <os firmware='efi'> is probably preferable in the Xen driver,
where libxl supports a firmware setting with accepted values such as
bios, ovmf, uefi (currently same semantics as ovmf), seabios, etc.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Xen+ovmf does not support secure boot. Fail domain def validation
if secure boot is enabled.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce libxlDomainDefValidate and move the existing validation
check from libxlDomainDefPostParse. Additional validation will be
introduced in subsequent patches.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libxl objects are supposed to be initialized and disposed. Adjust
libxlMakeNic to use an already initialized object owned by the caller.
Adjust libxlMakeNicList to initialize the list of objects, before they
are filled by libxlMakeNic. The libxl_domain_config object passed to
libxlMakeNicList is owned by the caller and will be disposed with
libxl_domain_config_dispose, which also disposes embedded objects such
as libxl_device_nic.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
There's an if-else statement in libxlCapsInitNuma() that can
really be just two standalone if()-s. Writing it as such helps
with code readability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Pre-extending the disk array size is pointless nowadays since we've
switched to memory APIs which don't return failure.
Switch all uses of reallocation of the array followed by
'virDomainDiskInsertPreAlloced' with direct virDomainDiskInsert.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
None of them are currently needed to pass our upstream CI, most were
either for ancient clang versions or coverity for silencing false
positives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After previous patches we have two structures:
virCapsHostNUMACellDistance and virNumaDistance which express the
same thing. And have the exact same members (modulo their names).
Drop the former in favor of the latter.
This change means that distances with value of 0 are no longer
printed out into capabilities XML, because domain XML code allows
partial distance specification and thus threats value of 0 as
unspecified by user (see virDomainNumaGetNodeDistance() which
returns the default LOCAL/REMOTE distance for value of 0).
Also, from ACPI 6.1 specification, section 5.2.17 System Locality
Distance Information Table (SLIT):
Distance values of 0-9 are reserved and have no meaning.
Thus we shouldn't be ever reporting 0 in neither domain nor
capabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virCapsHostNUMACellSiblingInfo structure really represents
distance to other NUMA node. Rename the structure and variables
of that type to make it more obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The used libxl_domain_build_info, which is contained in
libxl_domain_config, is owned and already initialized by the caller.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The passed libxl_domain_create_info is owned, and already initialized,
by the caller.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
libxl objects are supposed to be initialized and disposed.
Correct the usage of libxl_device_disk objects which are allocated on
the stack. Initialize each one prior usage, and dispose them once done.
Adjust libxlMakeDisk to use an already initialized object, it is owned
by the caller.
Adjust libxlMakeDiskList to initialize the list of objects, before they
are filled by libxlMakeDisk. In case of error, the objects are disposed
by libxl_domain_config_dispose.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The passed libxl_domain_config is owned, and already initialized, by the
caller.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The initial variant of libxlDomainChangeEjectableMedia could just leave
the function earlier. With refcounting this does not work anymore.
Fixes commit a5bf06ba34
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Since Xen 4.5 libxl allows to set affinities during domain creation.
This enables Xen to allocate the domain memory on NUMA systems close to
the specified pcpus.
Libvirt can now handle <domain/cputune/vcpupin> in domU.xml correctly.
Without this change, Xen will create the domU and assign NUMA memory and
vcpu affinities on its own. Later libvirt will adjust the affinity,
which may move the vcpus away from the assigned NUMA node.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
When fetching the value of a private secret, we need to use an elevated
identity otherwise the secret driver will deny access.
When using the modular daemons, the elevated identity needs to be active
before the secret driver connection is opened, and it will apply to all
APIs calls made on that conncetion.
When using the monolithic daemon, the identity at time of opening the
connection is ignored, and the elevated identity needs to be active
precisely at the time the virSecretGetValue API call is made.
After acquiring the secret value, the elevated identity should be
cleared.
This sounds complex, but is fairly straightfoward with the automatic
cleanup callbacks.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
What this function really does it takes ownership of all pointers
passed (well, except for the first one - caps - to which it
registers new NUMA node). But since all info is passed as a
single pointer it's hard to tell (and use g_auto*). Let's use
double pointers to make the ownership transfer obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
xc_get_max_cpus from Xen version 4.3 may return 0 in case xc_physinfo
fails. This has been fixed in Xen 4.4. Remove the obsolete result check
from libvirt. Just convert libxl error codes to plain -1.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
In Xen 4.2 struct libxl_event_hooks had a member which was erroneously
declared const. Since libvirt requires at least Xen 4.6, remove the dead
code.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The g_path_is_absolute() considers more situations
than just a simply "path[0] == '/'".
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Changes to other places using switch statements were required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Over several years of debugging reports related to VM shutdown, destruction,
and cleanup, I've found that logging of all events received from libxl and
logging the entry of libxlDomainCleanup has proven useful. Add the these
debug messages upstream to aid in future debugging.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_set_memory_target, which changed the storage size of
parameter "target_memkb" in Xen 4.8.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_send_trigger, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_set_vcpuonline, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_get_free_memory, which changed storage size of parameter
"memkb" in Xen 4.8.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_need_memory, which changed the storage size of
"need_memkb" in Xen 4.8. With Xen 4.12 the libxl_domain_config
parameter was changed
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_unpause, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_pause, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_reboot, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_shutdown, which got a new parameter
"ao_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_retrieve_domain_configuration, which got a new parameter
"libxl_asyncop_how" in Xen 4.12. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Upcoming changes will use different LIBXL_API_VERSION variants.
Prepare libxl_domain_create_restore, which got a new parameter
"send_back_fd" in Xen 4.7. libvirt does not use this parameter.
No functional change intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Recently, a few commits back I've switched bunch of code to
g_steal_pointer() using coccinelle. Problem was that the semantic
patch used was slightly off:
@@
expression a, b;
@@
+ b = g_steal_pointer(&a);
- b = a;
... when != a
- a = NULL;
Problem is that, "... when != a" is supposed to jump over those
lines, which don't contain expression a. My idea was to replace
the following pattern too:
ptrX = ptrY;
if (something(ptrZ) < 0) goto error;
ptrY = NULL;
But what I missed is that the following pattern is also matched
and replaced:
ptrX = ptrY;
if (something(ptrX) < 0) goto error;
ptrY = NULL;
This is not necessarily correct - as demonstrated by our hotplug
code. The real problem is ambiguous memory ownership transfer
(functions which add device to domain def take ownership only on
success), but to not tackle the real issue let's revert those
parts.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The order in which virNetworkUpdate() accepts @section and
@command arguments is not the same as in which it passes them
onto networkUpdate() callback. Until recently, it did not really
matter, because calling the API on client side meant arguments
were encoded in reversed order (compared to the public API), but
then on the server it was fixed again - because the server
decoded RPC (still swapped), called public API (still swapped)
and in turn called the network driver callback (with reversing
the order - so magically fixing the order).
Long story short, if the public API is called even number of
times those swaps cancel each other out. The problem is when the
API is called an odd numbed of times - which happens with split
daemons and the right URI. There's one call in the client (e.g.
virsh net-update), the other in a hypervisor daemon (say
virtqemud) which ends up calling the API in the virnetworkd.
The fix is obvious - fix the order in which arguments are passed
to the callback.
But, to maintain compatibility with older, yet unfixed, daemons
new connection feature is introduced. The feature is detected
just before calling the callback and allows client to pass
arguments in correct order (talking to fixed daemon) or in
reversed order (talking to older daemon).
Unfortunately, older client talking to newer daemon can't be
fixed. Let's hope that it's less frequent scenario.
Fixes: 574b9bc66b
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1870552
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Generated by the following spatch:
@@
expression a, b;
@@
+ b = g_steal_pointer(&a);
- b = a;
... when != a
- a = NULL;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In short, virXXXPtr type is going away. With big bang. And to
help us rewrite the code with a sed script, it's better if each
variable is declared on its own line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_strsplit to split the string and avoid use of stack'd strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_strndup with a freed buffer instead of the more complex approach
using virStrncpy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the temporary string an autofree-ing pointer and copy the contents.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Copy the input string so that we don't have to use a static buffer and
virStrncpy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generated using the following spatch:
@@
expression path;
@@
- virFileMakePath(path)
+ g_mkdir_with_parents(path, 0777)
However, 14 occurrences were not replaced, e.g. in
virHostdevManagerNew(). I don't really understand why.
Fixed by hand afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 887dd0d331 caused a small regression in NodeDeviceDetach in the libxl
driver when the 'driver' parameter is not specified. E.g.
# virsh nodedev-detach pci_0000_0a_10_0
error: Failed to detach device pci_0000_0a_10_0
error: An error occurred, but the cause is unknown
If the driver name is not specified, NULL is passed to
virDomainDriverNodeDeviceDetachFlags, in which case virPCIDeviceSetStubDriver
is never called to set the stub to pciback. Fix it by setting the driver to
"xen" if it is not specified when invoking NodeDeviceDetach.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Attempting to report error in case when we ran out of memory is
pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The libvirt libxl driver has no access to FDs associated with VM disks.
The disks are opened by libxl.so and any related FDs are not exposed to
applications. The prevents using virtlockd's auto-release feature to
release locks when the FD is closed. Acquiring and releasing locks is
explicitly handled by the libxl driver.
The current logic is structured such that locks are acquired in
libxlDomainStart and released in libxlDomainCleanup. This works well
except for migration, where the locks must be released on the source
host before the domain can be started on the destination host, but the
domain cannot be cleaned up until the migration confirmation stage.
When libxlDomainCleanup if finally called in the confirm stage, locks
are again released resulting in confusing errors from virtlockd and
libvirtd
virtlockd[8095]: resource busy: Lockspace resource 'xxxxxx' is not locked
libvirtd[8050]: resource busy: Lockspace resource 'xxxxxx' is not locked
libvirtd[8050]: Unable to release lease on testvm
The error is also encountered in some error cases, e.g. when
libxlDomainStart fails before acquiring locks and libxlDomainCleanup
is still used for cleanup.
In lieu of a mechanism to check if a lock has been acquired, this patch
takes an easy approach to fixing the unnecessary lock releases by adding
an indicator to the libxlDomainPrivate object that can be set when the
lock is acquired and cleared when the lock is released. libxlDomainCleanup
can then skip releasing the lock in cases where it was previously released
or never acquired in the first place.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit fa30ee04a2 caused a regression in normal domain shutown.
Initiating a shutdown from within the domain or via 'virsh shutdown'
does cause the guest OS running in the domain to shutdown, but libvirt
never reaps the domain so it is always shown in a running state until
calling 'virsh destroy'.
The shutdown thread is also an internal user of the driver shutdown
machinery and eventually calls libxlDomainDestroyInternal where
the ignoreDeathEvent inhibitor is set, but running in a thread
introduces the possibility of racing with the death event from
libxl. This can be prevented by setting ignoreDeathEvent before
running the shutdown thread.
An additional improvement is to handle the destroy event synchronously
instead of spawning a thread. The time consuming aspects of destroying
a domain have been completed when the destroy event is delivered.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libxlNodeDeviceDetachFlags() and qemuNodeDeviceDetachFlags() are mostly
equal, aside from how the virHostdevmanager pointer is retrieved and
the PCI stub driver used.
Now that the PCI stub driver verification is done early in both functions,
we can use the virDomainDriverNodeDeviceDetachFlags() helper to reduce
code duplication between them. 'driverName' is checked inside the helper
to set the appropriate stub driver.
The helper is named with the 'Flags' suffix, even when the helper itself
isn't receiving the flags from the callers, to be compliant with the
ACL function virNodeDeviceDetachFlagsEnsureACL() that is being called
inside it and was called from the original functions. Renaming the helper
would implicate in renaming REMOTE_PROC_NODE_DEVICE_DETACH_FLAGS, and all the
related structs inside remote_protocol.x, to be compliant with the ACL
rules.
This is not being checked at this moment, but we'll fix check-aclrules.py to
verify all the helpers that calls ACL functions in domain_driver.c shortly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The validation of 'driverName' does not depend on any other state and can be
done right on the start of the function. We can fail earlier while avoiding
a cleanup jump.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceReAttach() and qemuNodeDeviceReAttach() are mostly equal,
differing only how the virHostdevManager pointer is retrieved.
Put the common code into virDomainDriverNodeDeviceReAttach() to reduce
code duplication.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceReset() and qemuNodeDeviceReset() are mostly equal,
differing only how the virHostdevManager pointer is retrieved.
Put the common code into virDomainDriverNodeDeviceReset() to reduce
code duplication.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All of these strings are allocated once, freed once, and are never
returned out of the function where they are declared.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our implementation was inspired by glib anyways. The difference is only
the order of arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our implementation was heavily inspired by the glib version so it's a
drop-in replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Precalculate the lenght to avoid use of 'virStringListAdd' in a loop.
The code is also simplified by using APIs which don't return errors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'conflict' key in a virt_daemon_unit dictionary is not used when
generating systemd service and socket files. The comment associated
with the key claims the default is 'true', and a few build files
needlessly set it to 'true' when defining their virt_daemon_unit.
Remove the 'conflict' key and its use in the affect build files.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are few cases where STREQLEN() is called like this:
STREQLEN(var, string, strlen(string))
which is the same as STRPREFIX(var, string). Use STRPREFIX()
because it is more obvious what the check is doing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Clear the secret right after use with virSecureErase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The list isn't secret which would need being disposed of. Just expand
the array and return failure when adding the NULL terminator similarly
to how we expand the list for adding devices in a loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This was found by clang-tidy's "readability-misleading-indentation"
check.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Back in commit 2c71d3826, which appeared in libvirt-1.2.3 in April
2014, the location used to store saved MAC addresses and vlan tags of
SRIOV VFs was changed from /var/run/libvirt/qemu to
/var/run/libvirt/hostdevmgr. For backward compatibility the code was
made to continue looking in the old location for the files when it
didn't find them in the new location.
It's now been 6 years, and even if there was somebody still running
libvirt-1.2.3 on their system, that system would now be out of support
for libvirt, so there would be no way for them to upgrade to a new
libvirt that no longer looks in "oldStateDir" for the files. So
let's no longer look in "oldStateDir" for the files!
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current virPCIDeviceNew() signature, receiving 4 uints in sequence
(domain, bus, slot, function), is not neat.
We already have a way to represent a PCI address in virPCIDeviceAddress
that is used in the code. Aside from the test files, most of
virPCIDeviceNew() callers have access to a virPCIDeviceAddress reference,
but then we need to retrieve the 4 required uints (addr.domain, addr.bus,
addr.slot, addr.function) to satisfy virPCIDeviceNew(). The result is
that we have extra verbosity/boilerplate to retrieve an information that
is already available in virPCIDeviceAddress.
A better way is presented by virNVMEDeviceNew(), where the caller just
supplies a virPCIDeviceAddress pointer and the function handles the
details internally.
This patch changes virPCIDeviceNew() to receive a virPCIDeviceAddress
pointer instead of 4 uints.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Instead of receiving 4 uints in order and write domain/bus/slot/function,
receive a virPCIDeviceAddressPtr instead and write into it.
This change will allow us to simplify the API for virPCIDeviceNew()
in the next patch.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceGetPCIInfo() and qemuNodeDeviceGetPCIInfo() are equal.
Let's move the logic to a new virDomainDriverNodeDeviceGetPCIInfo()
info to be used by libxl_driver.c and qemu_driver.c.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Up until now we had a runtime code and XML related code in the same
source file inside util directory.
This patch takes the runtime part and extracts it into the new
storage_file directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that this function can be called regardless of interface type (and
whether or not we have a conn for the network driver), let's actually
call it for all interface types. This will assure that we re-connect
any disconnected bridge devices for <interface type='bridge'> as
mentioned in https://bugzilla.redhat.com/show_bug.cgi?id=1730084#c26
(until now we've only been reconnecting bridge devices for <interface
type='network'>)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Otherwise in some places we can mistakenly report 'unsupported' error instead
of root cause. So let's handle root cause explicitly from the macro.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify ReserveName/GenerateName for macvlan and macvtap by using
common functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The next objective is to move virDomainDeviceDefValidate() to
domain_validate.c. First let's move all the static helpers.
The net device validation functions are used across multiple
drivers, so let's move them separately first.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since Xen 4.2 libxl expects device_model_override="/path" instead of
device_model="/path". Adjust the code to parse this as <emulator>.
While libxl also recognizes device_model_version="", this knob is not
required for libvirt. A runtime detection exists in libvirt to select
either "qemu-xen" or "qemu-xen-traditional".
Since qemu-xen-traditional is marked as supported just for stubdoms
there is no need to handle it.
Test data files with 'device_model' were adjusted to use
'device_model_override' instead.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Glib provides g_auto(GStrv) which is in-place replacement of our
VIR_AUTOSTRINGLIST.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function only returns zero or aborts, so it might as well be void.
This has the added benefit of simplifying the code that calls it.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The function only returns zero or aborts, so it might as well be void.
This has the added benefit of simplifying the code that calls it.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It doesn't make much sense to configure the bucket count in the hash
table for each case specifically. Replace all calls of virHashCreate
with virHashNew which has a pre-set size and remove virHashCreate
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This adds a new value to virConnectCompareCPUFlags,
"VIR_CONNECT_CPU_VALIDATE_XML", that governs XML document validation in
virCPUDefParseXML.
In src/conf/cpu_conf.c, include configmake.h for PKGDATADIR and
virfile.h for virFileFindResource.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
I left in a 'return' or 'goto cleanup' in a few places
where I did the conversion manually.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
CVE-2020-25637
Add a requirement for domain:write if source is set to
VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_AGENT.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The refactoring in commit de49d5bad3 accidentally dropped the statement
setting def to NULL after successfully adding it to the virDomainObjList,
causing it to be freed while still in use. The resulting memory
corruption caused unpredictable behavior, often resulting in a libvirtd
crash.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
It was made pointless by:
commit c25c18f71b
Convert capabilities / domain_conf to use virArch
and unused by:
commit 8db1f2d228
Fix libxl driver for virArch changes
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When the xen driver loads, it probes libxl for some info about dom0 and
adds it to the virDomainObjList. The driver then looks for any domains
in stateDir and if they are still alive adds them to the list as well.
This logic is a bit flawed wrt handling driver reload and causes the
following error
internal error: unexpected domain Domain-0 already exists
A simple fix is to load all domains from stateDir first and then only
add dom0 if needed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
b_info->u.hvm.{acpi,apic} are deprecated. But also, on recent libxl
version (4.14) the old one seems to be broken. While libxl part should
be fixed too, update the usage here and at some point drop support for
the old version.
b_info->acpi was added in Xen 4.8
b_info->apic was added in Xen 4.10
Xen 4.10 is the oldest version that still has security support (until
December 2020).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Currently, we are mixing: #if HAVE_BLAH with #if WITH_BLAH.
Things got way better with Pavel's work on meson, but apparently,
mixing these two lead to confusing and easy to miss bugs (see
31fb929eca for instance). While we were forced to use HAVE_
prefix with autotools, we are free to chose our own prefix with
meson and since WITH_ prefix appears to be more popular let's use
it everywhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for the writeFiltering attribute in the domXML to native
config converter. Also include a test.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By default Xen only allows guests to write "known safe" values into PCI
configuration space, yet many devices require writes to other areas of
the configuration space in order to operate properly. To allow writing
any values Xen supports the 'permissive' setting, see xl.cfg(5) man page.
This change models Xen's permissive setting by adding a writeFiltering
attribute on the <source> element of a PCI hostdev. When writeFiltering
is set to 'no', the Xen permissive setting will be enabled and guests
will be able to write any values into the device's configuration space.
The permissive setting remains disabled in the absense of the
writeFiltering attribute, of if it is explicitly set to 'yes'.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The include was introduced by:
commit 3d6fe99c5c
Add vcpu functions to libxl driver
which used ceil() and floor(), but these were later
removed by:
commit 3eb869a04b
libxl: avoid compiler warning
which did not remove the include.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
There have been some reports that, due to libvirt always trying to
assign the lowest numbered macvtap / tap device name possible, a new
guest would sometimes be started using the same tap device name as
previously used by another guest that is in the process of being
destroyed *as the new guest is starting.
In some cases this has led to, for example, the old guest's
qemuProcessStop() code deleting a port from an OVS switch that had
just been re-added by the new guest (because the port name is based on
only the device name using the port). Similar problems can happen (and
I believe have) with nwfilter rules and bandwidth rules (which are
both instantiated based on the name of the tap device).
A couple patches have been previously proposed to change the ordering
of startup and shutdown processing, or to put a mutex around
everything related to the tap/macvtap device name usage, but in the
end no matter what you do there will still be possible holes, because
the device could be deleted outside libvirt's control (for example,
regular tap devices are automatically deleted when the qemu process
terminates, and that isn't always initiated by libvirt but could
instead happen completely asynchronously - libvirt then has no control
over the ordering of shutdown operations, and no opportunity to
protect it with a mutex.)
But this only happens if a new device is created at the same time as
one is being deleted. We can effectively eliminate the chance of this
happening if we end the practice of always looking for the lowest
numbered available device name, and instead just keep an integer that
is incremented each time we need a new device name. At some point it
will need to wrap back around to 0 (in order to avoid the IFNAMSIZ 15
character limit if nothing else), and we can't guarantee that the new
name really will be the *least* recently used name, but "math"
suggests that it will be *much* less common that we'll try to re-use
the *most* recently used name.
This patch implements such a counter for macvtap/macvlan, replacing
the existing, and much more complicated, "ID reservation" system. The
counter is set according to whatever macvtap/macvlan devices are
already in use by guests when libvirtd is started, incremented each
time a new device name is needed, and wraps back to 0 when either
INT_MAX is reached, or when the resulting device name would be longer
than IFNAMSIZ-1 characters (which actually is what happens when the
template for the device name is "maccvtap%d"). The result is that no
macvtap name will be re-used until the host has created (and possibly
destroyed) 99,999,999 devices.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support qemu commandline passthrough in the domXML to native config
converter. Add tests to check the conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Xen supports passing arbitrary arguments to the QEMU device model via
the 'extra' member of the public libxl_domain_build_info structure.
This patch adds a 'xen' namespace extension, similar to the QEMU and
bhyve drivers, to map arbitrary arguments to the 'extra' member. Only
passthrough of arguments is supported. Passthrough of environment
variables or capabilities adjustments is not supported.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There was a report on libvirt-users [1] about the domxml to/from
native converter in the Xen driver not handling PCI addresses
without a domain specification. This patch improves parsing of PCI
addresses in the converter and allows PCI addresses with only
bb:ss.f. xl.cfg(5) also allows either the dddd:bb:ss.f or bb:ss.f
format. A test has been added to check the conversion from xl.cfg
to domXML.
[1] https://www.redhat.com/archives/libvirt-users/2020-August/msg00040.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Most of our augeas files are generated during meson setup into build
directory and we were running augeas tests only for these files.
However, we have some other augeas and config files that are not
modified during meson setup and they are only in source directories.
In order to run tests for these files we need to provide different path
to both source and build directories.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <2020c6af8a8e4bb04acb629d089142be984484c8> fixed an issue with
QEMU driver by reporting offline CPUs as well. However, doing so it
introduced a regression into libxl and test drivers by completely
ignoring the passed `hostcpus` variable.
Move the virHostCPUGetAvailableCPUsBitmap() out of the helper into QEMU
driver so it will not affect other drivers which gets the number of host
CPUs differently.
This was uncovered by running libvirt-dbus test suite which counts on
the fact that test driver has hard-coded host definition and must not
depend on the host at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We should prevent inlining of symbols from the driver .so files that are
mocked, as well as those in the main libvirt.so
This isn't fixing any currently known problem, just trying to prevent
future issues.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Commit <894556ca813ad3c4ebb01083b7971d73b4f53c8b> moved function
virSecretGetSecretString out of secret directory but forgot to update
CFLAGS in places where the include is no longer needed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libxlMakeNic was calling g_strdup(virBufferCurrentContent(&buf)) to
make a copy of the buffer contents, and then later freeing the buffer
without ever using it again. Instead of this extra strdup, just
transfer ownership of the virBuffer's string with
virBufferContentAndReset(), and be done with it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are several calls to virBufferFreeAndReset() when functions
encounter an error, but the caller never uses the virBuffer once an
error has been encountered (all callers detect error by looking at the
function return value, not the contents of the virBuffer being
operated on), and now that all virBuffers are auto-freed there is no
reason for the lower level functions like these to spend time freeing
a buffer that is guaranteed to be freed momentarily anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU allows creating NUMA nodes that have memory only.
These are somehow important for HMAT.
With check done in qemuValidateDomainDef() for QEMU 2.7 or newer
(checked via QEMU_CAPS_NUMA), we can be sure that the vCPUs are
fully assigned to NUMA nodes in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is only one caller of virDomainNumaSetNodeCpumask() which
checks for the return value but because the function will return
NULL iff the @cpumask was NULL in the first place. But in that
place @cpumask can't be NULL because it was just allocated by
virBitmapParse().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Similar to commits 55ce656463 and 6c17606b7c in the qemu driver, make
separate copies of persistent and live device config and normalize the MAC
address between the two. This avoids having different MAC address for the
persistent and live config, ensuring the device has the same address when
the persistent config takes affect after a VM restart.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When no video device is specified in config we should set both
hvm.nographic to 1 and hvm.vga.kind to NONE.
Without hvm.vga.kind=LIBXL_VGA_INTERFACE_TYPE_NONE both -nographic and
-device 'cirrus-vga' are on qemu cmdline.
Signed-off-by: Artur Puzio <contact@puzio.waw.pl>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The libxl driver has suffered an identity crisis since its introduction.
It took on the name 'libxl' since at the time libvirt already contained
a 'xen' driver for the old Xen toolstack implementation. 'libxl' is short
for libxenlight, which is often called xenlight. Unfortunately all forms
of the name are used in the libxl driver.
The only remaining use of the 'xenlight' form is when interacting with
the host device manager, which is difficult to change since it would
cause problems when upgrading the driver.
Rename the #define to make it clear the 'xenlight' form is internal and
add a comment describing why the name exists and that its use should be
discouraged.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The libxl driver declares its name as 'Xen' through the public
virConnectGetType() API. In the virHypervisorDriver table the name is
set to 'xenlight'. To add more confusion, the name is set to 'LIBXL'
in the virStateDriver. For consistency, use the same name in the driver
tables as reported in the public virConnectGetType() API.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for xl.cfg(5) 'passthrough' option in the domXML-to-xenconfig
configuration converter.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support in the domXML<->native config converter for max_event_channels.
The parser and formater functions for max_grant_frames were reworked to
also parse max_event_channels. In doing so the xenbus controller is added
earlier in the config parsing, requiring a small adjustment to one of the
existing tests. Include a new test for the event channel conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for setting event_channels in libxl domain config object and
include a test to check that it is properly converted from XML to libxl
domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 54a401af47 split out DriverConfigInit from DriverConfigNew, but
then called it a bit late from libxlStateInitialize. The cfg is used in
libxlDriverConfigLoadFile and when uninitialized results in a crash.
Calling DriverConfigInit immediately after DriverConfigNew fixes the
crash.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This follows the example set by libvirtd, and makes it easier for
the admin to tweak the timeout or disable it altogether.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While not terribly useful in general, tweaking each daemon's
timeout (or disabling it off altogether) is a valid use case which
we can very easily support while being consistent with what already
happens for libvirtd. This is a first step in that direction.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The logic setting a device default should be in the post parse function
of individual driver code.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some of the node device APIs are a little odd because they accept a
virNodeDevicePtr object but are still implemented by the virt drivers.
The first thing the virt drivers need to do is get the XML config
associated with the node device, and that means talking to the node
device driver.
This worked previously because with monolithic libvirtd, both the
virt driver and node device driver were in the same daemon and thus
a single virConnectPtr can talk to both drivers.
With the split daemon world though, the virNodeDevicePtr passed into
the APIs is associated with the QEMU driver virConnectPtr, which has
no ability to invoke APIs against the node device driver. We must thus
get a duplicate virNodeDevicePtr object which is associated with a
virConnectPtr for the node device driver.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically threads are given a name based on the C function,
and this name is just used inside libvirt. With OS level thread
naming this name is now visible to debuggers, but also has to
fit in 15 characters on Linux, so function names are too long
in some cases.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ever since commit c5a00350 the libxl parser invokes the emulator
to probe which device model to use.
Commit b90c4b5 introduced a workaround that used a stable path
which was very likely to result in the answer matching the default.
However the test is still affected by the host state and the binary
gets invoked if present.
Mock the libxlDomainGetEmulatorType function to stop wasting CPU
cycles every time a 'make check' is run on a system with xen installed.
For example xlconfigtest gets faster by 90 %
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: b90c4b5f50
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Take the parts affected by the host state out of DriverConfigNew
and put them into a separate function.
Adjust all the callers to call both functions.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
These hardcoded defaults do not need to be read from
the file. Move them out of libxlDriverConfigLoadFile.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This module depends on domain_conf and is used directly by various
hypervisor drivers.
Move it to src/hypervisor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new timer model will be used to control the behavior of the
virtual timer for KVM ARM/virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now, that every use of virAtomic was replaced with its g_atomic
equivalent, let's remove the module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With Credit2 being Xen default scheduler, it's definitely the case to
allow Credit2's scheduling parameters to be get and set via libvirt.
This is easy, as Credit and Credit2 have (at least as of now) the very
same parameters ('weight' and 'cap'). So we can just let credit2 pass
the scheduler-type check and the same code will work for both.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
There are a large number of different header files that
are related to the sockets APIs. The virsocket.h header
includes all of the relevant headers for Windows and UNIX
in one convenient place. If virsocketaddr.h is already
included, then there's no need for virsocket.h
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The intent here is to allow the virt drivers to be run directly embedded
in an arbitrary process without interfering with libvirtd. To achieve
this they need to store all their configuration & state in a separate
directory tree from the main system or session libvirtd instances.
This can be useful for doing testing of the virt drivers in "make check"
without interfering with the user's own libvirtd instances.
It can also be used for applications using KVM/QEMU as a piece of
infrastructure to build an service, rather than for general purpose
OS hosting. A long standing example is libguestfs, which would prefer
if its temporary VMs did show up in the main libvirtd VM list, because
this confuses apps such as OpenStack Nova. A more recent example would
be Kata which is using KVM as a technology to build containers.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libxl driver already tries to call shutdown inhibit callback in the
right places, but only if it's set. That last part was missing,
resulting in premature shutdown when running libvirtd
--timeout=...
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The function virSecretGetSecretString calls into secret driver and is
used from other hypervisors drivers and as such makes more sense in
util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.
There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is
https://gitlab.gnome.org/GNOME/glib/issues/1999
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirt's original atomic ops impls were largely copied
from GLib's code at the time. The only API difference
was that libvirt's virAtomicIntInc() would return a
value, but g_atomic_int_inc was void. We thus use
g_atomic_int_add(v, 1) instead, though this means
virAtomicIntInc() now returns the original value,
instead of the new value.
This rewrites libvirt's impl in terms of g_atomic_int*
as a short term conversion. The key motivation was to
quickly eliminate use of GNULIB's verify_expr() macro
which is not a direct match for G_STATIC_ASSERT_EXPR.
Long term all the callers should be updated to use
g_atomic_int* directly.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Recently CPU hardware vendors have started to support a new structure
inside the CPU package topology known as a "die". Thus the hierarchy
is now:
sockets > dies > cores > threads
This adds support for "dies" in the XML parser, with the value
defaulting to 1 if not specified for backwards compatibility.
For example a system with 64 logical CPUs might report
<topology sockets="4" dies="2" cores="4" threads="2"/>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These functions are meant to replace verbose check for the old
style of specifying UEFI with a simple function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
g_get_real_time() returns the time since epoch in microseconds.
It uses gettimeofday() internally while libvirt used clock_gettime
because it is declared async signal safe. In practice gettimeofday
is also async signal safe *provided* the timezone parameter is
NULL. This is indeed the case in g_get_real_time().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If we use glib alloc functions, we can drop the 'cleanup' label
and @rv variable and also simplify the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Some variables are not used outside of the for() loop. Move their
declaration to clean up the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
When using the monolithic daemon, then dom->conn has all driver
tables filled in properly and thus it's safe to call an API other
than virDomain*(). However, when using split daemons then
dom->conn has only hypervisor driver table set
(dom->conn->driver) and the rest is NULL. Therefore, if we want
to call a non-domain API (virNetworkLookupByName() in this case),
we have obtain the cached connection object accessible via
virGetConnectNetwork().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To simplify implementation, some restrictions are added. For
instance, an NVMe disk can't go to any bus but virtio and has to
be type of 'disk' and can't have startupPolicy set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There is plenty of distributions that haven't switched to
systemd nor they force their users to (Gentoo, Alpine Linux to
name a few). With the daemon split merged their only option is to
still use the monolithic daemon which will go away eventually.
Provide init scripts for these distros too.
For now, I'm not introducing config files which would correspond
to the init files except for libvirtd and virtproxyd init scripts
where it might be desirable to tweak the command line of
corresponding daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Replace all the uses passing a single parameter as the length.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the usage where sanity of the length argument is verified
by other conditions not matching the previous patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
