Commit Graph

50 Commits

Author SHA1 Message Date
Peter Krempa
957d597330 conf: Replace writes to def->vcpus with accessor 2015-12-09 14:57:12 +01:00
Peter Krempa
d1dda68777 conf: Replace read access to def->maxvcpus with accessor
Finalize the refactor by adding the 'virDomainDefGetVCpusMax' getter and
reusing it accross libvirt.
2015-12-09 14:57:12 +01:00
Peter Krempa
c970c4a5ea conf: Add helper to check whether domain has offline vCPUs
The new helper will simplify checking whether the domain config contains
inactive vCPUs.
2015-12-09 14:57:12 +01:00
Peter Krempa
4e187169f0 conf: Replace writes to def->maxvcpus with accessor
To support further refactors replace all write access to def->maxvcpus
with a accessor function.
2015-12-09 14:57:12 +01:00
Pavel Hrdina
5cc2d8f6d5 xen: fix timer bug found by updated test
Only 'tsc' timer allows set mode and track is valid only for 'rtc' and
'platform' timers.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-12-09 12:59:27 +01:00
Pavel Hrdina
91a00424db xen: use virDomainDefPostParse for parsing XM/XL/SEXPR cofings
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-12-09 12:59:21 +01:00
Ishmanpreet Kaur Khera
32cee5b2f0 Avoid using !STREQ and !STRNEQ
We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.

Signed-off-by: Ishmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-10-21 15:03:35 +02:00
Peter Krempa
8059a99025 conf: Rename max_balloon to total_memory
The name of the variable was misleading. Rename it and it's setting
accessor before other fixes.
2015-09-22 16:09:28 +02:00
Jonathan Toppins
5c668a78d8 qemu: add udp interface support
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.

The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.

<interface type='udp'>
  <mac address='52:54:00:5c:67:56'/>
  <source address='127.0.0.1' port='11112'>
    <local address='127.0.0.1' port='22222'/>
  </source>
  <model type='virtio'/>
  <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>

QEMU call:
	-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222

Notice the xml "local" entry becomes the "localaddr" for the qemu call.

reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html

Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-09-02 10:17:50 +02:00
John Ferlan
5cd985221b Use the correct symbol for 'onCrash'
Although defined the same way, fortunately there hadn't been any deviation.
Ensure any assignments to onCrash use VIR_DOMAIN_LIFECYCLE_CRASH_* defs and
not VIR_DOMAIN_LIFECYCLE_* defs
2015-06-30 11:32:50 -04:00
Jim Fehlig
a5b55bd931 xenconfig: fix spice mousemode and copypaste
From xl.cfg950 man page:

spiceagent_mouse=BOOLEAN
Whether SPICE agent is used for client mouse mode. The default is
true (1) (turn on)

spicevdagent=BOOLEAN
Enables spice vdagent. The Spice vdagent is an optional component for
enhancing user experience and performing guest-oriented management
tasks. Its features includes: client mouse mode (no need to grab
mouse by client, no mouse lag), automatic adjustment of screen
resolution, copy and paste (text and image) between client and domU.
It also requires vdagent service installed on domU o.s. to work.
The default is 0.

spice_clipboard_sharing=BOOLEAN
Enables Spice clipboard sharing (copy/paste). It requires spicevdagent
enabled. The default is false (0).

So if spiceagent_mouse is enabled (client mouse mode) or
spice_clipboard_sharing is enabled, spicevdagent must be enabled.
Along with this change, s/spicedvagent/spicevdagent, set
spiceagent_mouse correctly, and add a test for these spice
features.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-05-18 12:46:16 -06:00
Jim Fehlig
a460295f4e xenconfig: fix spicepasswd handling
The logic related to spicedisable_ticketing and spicepasswd was
inverted.  As per man xl.cfg(5), 'spicedisable_ticketing = 1'
means no passwd is required.  On the other hand, a passwd is
required if 'spicedisable_ticketing = 0'.  Fix the logic and
produce and error if 'spicedisable_ticketing = 0' but spicepasswd
is not provided.  Also fix the spice cfg test file.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-05-18 12:46:16 -06:00
Jim Fehlig
e21b1180a9 xenconfig: format spice listenAddr when formating ports
Move formating of spice listenAddr to the section of code
where spice ports are formatted.  It is more logical to
format address and ports together.  Account for the change
in spice cfg test file by moving 'spicehost'.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-05-18 12:46:16 -06:00
Jim Fehlig
096b39c961 xenconfig: use local variable for graphics def
'graphics->' is a bit easier to read and type, and makes for
shorter lines than 'def->graphics[0]->'.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-05-18 12:46:16 -06:00
Jiri Denemark
890fa6a055 Add privateData to virDomainDiskDef
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-05-15 08:04:26 +02:00
Cole Robinson
747761a79a caps: Use DomainDataLookup to replace GuestDefault*
This revealed that GuestDefaultEmulator was a bit buggy, capable
of returning an emulator that didn't match the passed domain type. Fix
up the test suite input to continue to pass.
2015-04-20 16:43:13 -04:00
Cole Robinson
4fa6f9b413 caps: Convert to use VIR_DOMAIN_VIRT internally 2015-04-20 16:40:26 -04:00
Cole Robinson
5f7c599456 domain: Convert os.type to VIR_DOMAIN_OSTYPE enum 2015-04-20 16:40:09 -04:00
Cole Robinson
4231485c1c caps: Use an enum internally for ostype value
But the internal API stays the same, and we just convert the value as
needed. Not useful yet, but this is the beginning step of using an enum
for ostype throughout the code.
2015-04-20 16:37:25 -04:00
Jim Fehlig
13e2c22099 libxl: support HVM direct kernel boot
Add support for HVM direct kernel boot in libxl.  Also add a
test to verify domXML <-> native conversions.

Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-04-16 16:14:51 -06:00
Jim Fehlig
0fe504f15a xenconfig: don't use "kernel" for hvmloader
In xl config, hvmloader is implied for hvm guests.  It is not
specified with the "kernel" option like xm config.  The "kernel"
option, along with "ramdisk" and "extra", is used for HVM direct
kernel boot.  Instead of using "kernel" option to populate
virDomainDef object's os.loader->path, use hvmloader discovered
when gathering capabilities.

This change required fixing initialization of capabilities in
the test utils and removing 'kernel = "/usr/lib/xen/boot/hvmloader"'
from the test config files.
2015-04-16 16:11:01 -06:00
Jim Fehlig
717a92513d xenconfig: move <os> parsing/formating to config-specific files
xl and xm differ a bit in how <os> configuration is represented.
E.g. xl config supports <os><nvram .../></os> via its "bios"
setting.

Move the xenParseOS and xenFormatOS functions from xen_common.c
and copy to xen_xl.c and xen_xm.c so they can be customized for
xm vs xl config.  An unfortunate fallout is reordering of entries
in the test config files.
2015-04-16 16:11:01 -06:00
Jim Fehlig
a9b0d647bc xenconfig: remove redunant parsing of device_model
device_model is parsed in xenParseOS(), then later in
xenParseConfigCommon().  <emulator> is not part of <os>,
so makes sense to remove the parsing in xenParseOS().
2015-04-16 16:11:01 -06:00
Jim Fehlig
8680a19bc8 xenconfig: export xenConfigCopyString
Export xenConfigCopyString for use outside of xen_common.c

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-04-16 16:11:01 -06:00
Erik Skultety
b77ce18a28 virBitmap: Place virBitmapIsAllClear check after virBitmapParse calls
This patch adds checks for empty bitmaps right after the calls of
virBitmapParse. These only include spots where set API's are called and
where domain's XML is parsed.
Also, it partially reverts commit 983f5a which added a check for
invalid nodeset "0,^0" into virBitmapParse function. This change broke
the logic, as an empty bitmap should not cause an error.

https://bugzilla.redhat.com/show_bug.cgi?id=1210545
2015-04-13 14:21:02 +02:00
Martin Kletzander
0e7457e501 Fix common misspellings
Wikipedia's list of common misspellings [1] has a machine-readable
version.  This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched.  The list of changes was manually re-checked for false
positives.

[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-03-23 09:01:30 +01:00
Peter Krempa
4f9907cd11 conf: Replace access to def->mem.max_balloon with accessor functions
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.

To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.

The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.

Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
2015-03-16 14:26:51 +01:00
Marek Marczykowski-Górecki
cd5dc3031f xenconfig: add support for multiple USB devices syntax
In Xen>=4.3, libxl supports new syntax for USB devices:
usbdevice=[ "DEVICE", "DEVICE", ... ]
Add support for that in xenconfig driver. When only one device is
defined, keep using old syntax for backward compatibility.

Adjust tests for changed options order.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
2015-03-13 12:00:49 -06:00
Peter Krempa
c03411199e conf: Allocate domain definition with the new helper
Use the virDomainDefNew() helper to allocate the definition instead of
doing it via VIR_ALLOC.
2015-02-20 17:43:05 +01:00
Jim Fehlig
4689cdf779 Introduce support for parsing/formatting Xen xl config format
Introduce a parser/formatter for the xl config format.  Since the
deprecation of xm/xend, the VM config file format has diverged as
new features are added to libxl.  This patch adds support for parsing
and formating the xl config format.  It supports the existing xm config
format, plus adds support for spice graphics and xl disk config syntax.

Disk config is specified a bit differently in xl as compared to xm.  In
xl, disk config consists of comma-separated positional parameters and
keyword/value pairs separated by commas. Positional parameters are
specified as follows

   target, format, vdev, access

Supported keys for key=value options are

  devtype, backendtype

The positional paramters can also be specified in key/value form.  For
example the following xl disk config are equivalent

    /dev/vg/guest-volume,,hda
    /dev/vg/guest-volume,raw,hda,rw
    format=raw, vdev=hda, access=rw, target=/dev/vg/guest-volume

See $xen_sources/docs/misc/xl-disk-configuration.txt for more details.

xl disk config is parsed with the help of xlu_disk_parse() from
libxlutil, libxl's utility library.  Although the library exists
in all Xen versions supported by the libxl virt driver, only
recently has the corresponding header file been included.  A check
for the header is done in configure.ac.  If not found, xlu_disk_parse()
is declared externally.

Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-01-14 08:28:50 -07:00
Jim Fehlig
f7a30375bd Revert "src/xenconfig: Xen-xl parser"
This reverts commit 2c78051a14.

Conflicts:
	src/Makefile.am

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-01-12 10:15:13 -07:00
Cédric Bosdonnat
e85df0901d Report error if a driver can't handle multiple IP addresses
Drivers supporting one and only one IP address raise an error if more IP
addresses are configured.
2015-01-05 20:24:18 +01:00
Cédric Bosdonnat
aa2cc72100 Domain conf: allow more than one IP address for net devices
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
2015-01-05 20:24:04 +01:00
Chunyan Liu
90ed3bd0aa xenconfig: set HVM pae/apic/acpi/ default to 1
According to xm.config manual, HVM pae|apic|acpi feature default
is 1 (enabled). But in conversion from xm config to libvirt xml,
if xm config doesn't contain pae|apic|acpi, it sets default value
to 0, this causes some problems in HVM guest.

Update parser codes to set HVM pae|apic|acpi default value to 1
to match xm config convension.

Signed-off-by: Chunyan Liu <cyliu@suse.com>
2015-01-04 11:09:34 -07:00
Kiarie Kahurani
2c78051a14 src/xenconfig: Xen-xl parser
Introduce a Xen xl parser

This parser allows for users to convert the new xl disk format and
spice graphics config to libvirt xml format and vice versa. Regarding
the spice graphics config, the code is pretty much straight forward.
For the disk {formating, parsing}, this parser takes care of the new
xl format which include positional parameters and key/value parameters.
In xl format disk config a <diskspec> consists of parameters separated by
commas. If the parameters do not contain an '=' they are automatically
assigned to certain options following the order below

   target, format, vdev, access

The above are the only mandatory parameters in the <diskspec> but there
are many more disk config options. These options can be specified as
key=value pairs. This takes care of the rest of the options such as

  devtype, backend, backendtype, script, direct-io-safe,

The positional paramters can also be specified in key/value form
for example

    /dev/vg/guest-volume,,hda
    /dev/vg/guest-volume,raw,hda,rw
    format=raw, vdev=hda, access=rw, target=/dev/vg/guest-volume

are interpleted to one config.

In xm format, the above diskspec would be written as

phy:/dev/vg/guest-volume,hda,w

The disk parser is based on the same parser used successfully by
the Xen project for several years now.  Ian Jackson authored the
scanner, which is used by this commit with mimimal changes.  Only
the PREFIX option is changed, to produce function and file names
more consistent with libvirt's convention.

Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-01-03 22:41:07 -07:00
Kiarie Kahurani
7ad117b2e3 src/xenconfig: Export helper functions
Export helper functions for reuse in getting values
from a virConfPtr object

Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-01-03 21:57:33 -07:00
Wei Liu
64b0484cad xenconfig: fix boot device parsing
The original code always checked *boot which was in effect boot[0]. It
should use boot[i].

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
2014-12-15 08:42:02 -05:00
Michal Privoznik
ca4f9518b8 virconf: Introduce VIR_CONF_ULONG
https://bugzilla.redhat.com/show_bug.cgi?id=1160995

In our config files users are expected to pass several integer values
for different configuration knobs. However, majority of them expect a
nonnegative number and only a few of them accept a negative number too
(notably keepalive_interval in libvirtd.conf).
Therefore, a new type to config value is introduced: VIR_CONF_ULONG
that is set whenever an integer is positive or zero. With this
approach knobs accepting VIR_CONF_LONG should accept VIR_CONF_ULONG
too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-12-15 10:34:18 +01:00
John Ferlan
121c09a90b Replace virNetworkFree with virObjectUnref
Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
2014-12-02 11:03:40 -05:00
Martin Kletzander
4fab120923 Remove unnecessary curly brackets in rest of src/
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-14 17:13:36 +01:00
Michal Privoznik
68bf13dbef conf: Extend <loader/> and introduce <nvram/>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.

Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files

The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-10 09:38:07 +02:00
Eric Blake
0e8bed8177 maint: update to latest gnulib
The usual portability fixes; and this includes a fix that adds
a new syntax check for double semicolons (commit 28de556 fixed
some, but gnulib found a better check).

* .gnulib: Update to latest.
* src/xenconfig/xen_common.c (xenFormatConfigCommon): Fix offender.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-09-06 19:14:43 -06:00
Eric Blake
fb6d650717 maint: use consistent if-else braces in xen and friends
I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This patch focuses on code related to xen.

* src/libxl/libxl_conf.c (libxlCapsInitGuests)
(libxlMakeDomBuildInfo): Correct use of {}.
* src/xen/xen_hypervisor.c (virXen_getvcpusinfo)
(xenHypervisorMakeCapabilitiesInternal): Likewise.
* src/xen/xend_internal.c (xenDaemonOpen)
(xenDaemonDomainMigratePerform, xend_detect_config_version)
(xenDaemonDetachDeviceFlags, xenDaemonDomainMigratePerform)
(xenDaemonDomainBlockPeek): Likewise.
* src/xenapi/xenapi_driver.c (xenapiConnectListDomains)
(xenapiDomainLookupByUUID, xenapiDomainGetOSType): Likewise.
* src/xenconfig/xen_common.c (xenParseCPUFeatures, xenFormatNet):
Likewise.
* src/xenconfig/xen_sxpr.c (xenParseSxpr, xenFormatSxprNet)
(xenFormatSxpr): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-09-04 08:53:21 -06:00
John Ferlan
cfbbeb36cf xen_xm: Resolve Coverity USE_AFTER_FREE
If virDomainDiskDefFree(disk) is called in 'skipdisk:', then it's possible
to either return to skipdisk without reallocating a new disk (via the if
condition just prior) or to end the loop having deleted the disk. Since
virDomainDiskDefFree() does not pass by reference, disk isn't changed in
this context, thus the possible issue.
2014-08-27 12:52:27 -04:00
John Ferlan
0454f23c31 xen_common: Resolve Coverity USE_AFTER_FREE
There were two warnings in this module

  If the VIR_ALLOC_N(def->serials, 1) fails, then a virDomainChrDefFree(chr)
  is called and we jump to cleanup which makes the same call. Just remove
  the one after VIR_ALLOC_N()

  In the label "skipnic:" a virDomainNetDefFree(net) is made; however, if
  in going back to the top of the loop we jump back down to skipnic for any
  reason, the call will attempt to free an already freed structure since
  "net" was not passed by reference to virDomainNetDefFree().  Just set
  net = NULL in skipnic: to resolve the issue.
2014-08-27 12:52:27 -04:00
John Ferlan
c585334bdd xenconfig: Resolve Coverity RESOURCE_LEAK
Since '337a13628' - Coverity complains that 'net' is VIR_ALLOC()'d, but
on various 'cleanup' exit paths from the code there is no corresponding
cleanup.
2014-08-22 13:02:48 -04:00
Jim Fehlig
337a136282 src/xenconfig: move common parsing/formatting to xen_common
XM and XL config are very similar.  Disks are specified differently
in XL, but the old XM disk config is still supported by XL.  XL also
supports new config like spice that was never supported by XM.

This patch moves all the common parsing and formatting functions to
the new file xen_common.c and adapts the XM parser/formatter accordingly.
This restructuring paves way for introducing an XL parser/formatter in
the future.

While moving the code, fixup whitespace, comments, and style issues.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2014-08-18 20:47:38 -06:00
Kiarie Kahurani
f67bf6e9b5 src/xenconfig: wrap common formatting code
Wrap formatting code common to xm and xl in xenFormatConfigCommon
and export it.

Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2014-08-18 20:37:07 -06:00
Kiarie Kahurani
512f673835 src/xenconfig: wrap common parsing code
Wrap parsing code common to xm and xl in xenParseConfigCommon
and export it.

Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2014-08-18 20:36:56 -06:00
Jim Fehlig
870c90c70f xen: rename xenxs to xenconfig
src/xenxs contains parsing/formating functions for the various xen
config formats, and is better named src/xenconfig.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2014-08-18 20:36:24 -06:00