POWER hosts does not implement CPU virtualization extensions like
x86 or s390x. Instead, all bare-metal POWER hosts are considered
to be virtualization ready.
For POWER, the validation is done by checking if the virtualization
module kvm_hv is loaded in the host. If not, we should warn the
user about it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
wire-up virAdmServerUpdateTlsFiles API into virt-admin client.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wu Qingliang <wuqingliang4@huawei.com>
Use 'g_autoptr' which mandates initialization for 'hostname' and also
for 'domain' to allow full refactor of the cleanup path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After the introduction of virenum.h in commit 285c5f28c4,
it is only needed in the C file.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Historically, this file was a dump for most of our helper
functions and needed almost everywhere.
With the introduction of virfile.h and virstring.h,
and more importantly, virenum.h and the introduction
of GLib, that is no longer true.
Remove its include from C files that don't even use it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Simplify gathering the actual return value from a passed-through QMP
command when using 'qemu-monitor-command' by adding '--return-value'
switch which just extracts the 'return' section and alternatively
reports an error if the section is not present.
This simplifies gathering of some test data where the full reply would
need to be trimmed just for the actual return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For long running jobs (save, managed save, dump & live migrate)
virsh runs a background thread for executing the job and then
has the main thread catch Ctrl-C for graceful shutdown, as well
as displaying progress info.
The monitoring code is written using poll, with a pipe used
to get the completion status from the thread. Using a pipe
and poll is problematic for Windows portability. This rewrites
the code to use a GMainLoop instance for monitoring stdin and
doing progress updates. The use of a pipe is entirely eliminated,
instead there is just a shared variable between both threads
containing the job completion status.
No mutex locking is used because the background thread writes
to the variable only when the main loop is still running,
while the foreground thread only reads it after the main loop
has exited.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pvpanic device supports bit 1 as crashloaded event, it means that
guest actually panicked and run kexec to handle error by guest side.
Handle crashloaded as a lifecyle event in libvirt.
Test case:
Guest side:
before testing, we need make sure kdump is enabled,
1, build new pvpanic driver (with commit from upstream
e0b9a42735f2672ca2764cfbea6e55a81098d5ba
191941692a3d1b6a9614502b279be062926b70f5)
2, insmod new kmod
3, enable crash_kexec_post_notifiers,
# echo 1 > /sys/module/kernel/parameters/crash_kexec_post_notifiers
4, trigger kernel panic
# echo 1 > /proc/sys/kernel/sysrq
# echo c > /proc/sysrq-trigger
Host side:
1, build new qemu with pvpanic patches (with commit from upstream
600d7b47e8f5085919fd1d1157f25950ea8dbc11
7dc58deea79a343ac3adc5cadb97215086054c86)
2, build libvirt with this patch
3, handle lifecycle event and trigger guest side panic
# virsh event stretch --event lifecycle
event 'lifecycle' for domain stretch: Crashed Crashloaded
events received: 1
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
The O_SYNC flag is not defined on Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Always trim the full specified suffix.
All of the callers outside of tests were passing either
strlen or the actual length of the string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Replace all the cases that only supply the length
and do not care about matching a suffix, as well
as that one test case that does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
rpmlint complains about "script-without-shebang" due to the execute
permissions on /usr/share/bash-completion/completions/vsh. Use
INSTALL_DATA instead of INSTALL_SCRIPT to avoid the unnecessary
execute permissions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The Windows platform does not have the signal handling
support we need, so it must be disabled in several parts
of the codebase.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The combination of g_unichar_iszerowidth and
g_unichar_iswide is sufficient to replicate the logic
of wcwidth() for libvirt.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we rely on gnulib creating configmake.h, but we
can easily create it ourselves instead.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This imports a simpler version of GNULIB's getpass() function
impl for Windows. Note that GNULIB's impl was buggy as it
returned a static string on UNIX, and a heap allocated string
on Windows. This new impl always heap allocates.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify human usage of secret-set-value by adding --interactive which
will read the value of the secret from the terminal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow using the contents of --file without base64 decoding.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Print a warning if users pass in secrets as command line arguments and
mention it in the man page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The necessity to specify the secret value as command argument is
insecure. Allow reading the secret from a file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Users might want to get the raw value instead of dealing with base64
encoding. This might be useful for redirection to file and also for
simple human-readable secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Similarly to other libvirt object freeing APIs the function resets the
libvirt error when called and doesn't take NULL gracefully. Install the
workaround and g_autoptr handlers similarly to the 'virshDomain' type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.
There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is
https://gitlab.gnome.org/GNOME/glib/issues/1999
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GNULIB termios module ensures termios.h exists (but
is none the less empty) when building for Windows. We
already exclude usage of the functions that would exist
in a real termios.h, so having an empty termios.h is
not especially useful.
It is simpler to just put all use of termios.h related
functions behind a "#ifndef WIN32" conditional.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a vastly simpler VIR_INT64_STR_BUFLEN constant
which is large enough for all cases where we currently
use INT_BUFSIZE_BOUND. This eliminates most use of the
gnulib intprops.h header.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our virsh already has 'domhostname' command. Add '--source'
argument to it so that users can chose between 'lease' and
'agent' sources. Also, implement completer for the argument.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
--tls-destination would be just ignored unless --tls is not specified,
which is correct, but let's provide a bit of a guidance is a user
forgets to add --tls.
This is just a virsh-only check targeted to end users as we don't
currently have such checks at the API level for migration parameters
that depend on flags.
https://bugzilla.redhat.com/show_bug.cgi?id=1784345
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The 'domifaddr' command accepts several arguments. Let's validate
them first and look up domain to work with only after to save
some RPC cycles should validation fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduced in v5.10.0-449-gcf44ec5577 it used
virshCommaStringListComplete() to generate list of options. But
this is not correct because the '--source' argument of the
'domifaddr' doesn't accept a string list (for instance
"arp,agent,lease") rather than a single string. Therefore, the
completer must return these strings separately and thus must
refrain from using virshCommaStringListComplete().
At the same time, now that we have strings we need declared as
an enum we can use TypeToString() instead of copying strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are more occurrences, but I'm converting --source argument
of domifaddr command only, because I will need it in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
commandhelper.c is not converted since this is a standalone
program only run on UNIX, so can rely on getcwd().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_get_real_time() returns the time since epoch in microseconds.
It uses gettimeofday() internally while libvirt used clock_gettime
because it is declared async signal safe. In practice gettimeofday
is also async signal safe *provided* the timezone parameter is
NULL. This is indeed the case in g_get_real_time().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_pattern_match function_simple is an acceptably close
approximation of fnmatch for libvirt's needs.
In contrast to fnmatch(), the '/' character can be matched
by the wildcards, there are no '[...]' character ranges and
'*' and '?' can not be escaped to include them literally in
a pattern.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Eliminate direct use of normal setenv/unsetenv calls in
favour of GLib's wrapper. This eliminates two gnulib
modules
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The command `domifaddr` can use three different sources to grab IP
address of a Virtual Machine: lease, agent and arp. This parameter does
not have a completer function to return source options.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.
This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html
Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virGetUserCacheDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it clearer that what we're trying to do is find @source and
@target_node so that the unattentive or code analysis utility
doesn't believe 'source' and 'target' could be found in the same
node element.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
My commit e73889b631
split the -Wframe-larger-than warning setting into
two different variables - STRICT_FRAME_LIMIT_CFLAGS
for the library code and RELAXED_FRAME_LIMIT_CFLAGS
which was needed for tests.
Use the strict limit by default and specify the warning
flag twice for the parts that require a larger stack
frame, relying on the fact that the compiler will pick
up the latter value.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is slightly more complicated because NVMe disk source is not
a simple attribute to <source/> element. The format in which the
PCI address and namespace ID are printed is the same as QEMU
accepts them:
nvme://XXXX:XX:XX.X/X
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These days libvirt is pretty reliable and even remote connections
(not the default for libvirt-guests anyway) either work or fail but are
uncommon to be flaky.
On the other hand users might have disabled the service and while we are
After=libvirtd for ordering we are not Requiring it. Adding that or any
harder dependency might break our ordering. But if people have disabled
libvirt they will do a full retry loop until timeout.
Lets drop the loop to be much faster if a remote is not reachable.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1854653
This reverts
commit 4e7fc8305a
Author: Michal Prívozník <mprivozn@redhat.com>
Date: Fri Feb 21 12:46:08 2014 +0100
libvirt-guests: Wait for libvirtd to initialize
The race described in that commit no longer exists using systemd as
we now have socket activation. If not using systemd, then it is also
safe if using the libvirtd --daemon flag, since the parent process
won't return to the caller until the child is accepting connections.
Reported-by: Doug Smythies <dsmythies@telus.net>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Remove the usage where sanity of the length argument is verified
by other conditions not matching the previous patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We abort on allocation errors now so there is no need to
have a function for it.
Replace the only use by return -1, chosen by fair dice roll.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The stats reported for a blockjob which is member of a domain pull
backup refer to the utilization of the scratch file rather than the
progress of the backup as the progress of the backup depends on the
client. Note this quirk in the docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backup job may consist of many backup sub-blockjobs. Add the new
blockjob type and add all type converter strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce virsh commands for performing backup jobs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce VIR_DOMAIN_JOB_OPERATION_BACKUP into virDomainJobOperation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This option can be used to override the destination host name used for
TLS verification.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce --rawstats which prints all statistics fields from the new API
similarly to how the virsh event handler prints them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce the --anystats flag which does not skip the printing of the
stats if the job was unsuccessful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Printing that a job failed is rather unhelpful. Print at least the
operation which failed.
Achieve this by moving the check whether to print stats later but
replace it with a check which will skip printing of the operation if
there's no job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
To simplify the stats printer code we convert the new statistics from
the typed parameter list into the old stats structure.
Extract this code since it takes a lot of space.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Before we rewrote nss plugin so that it doesn't use libvirt's
internal functions it used virLeaseReadCustomLeaseFile() to parse
.status files. After the rewrite it's using read() + yajl_parse()
+ yajl_complete_parse(). There's one catch though,
virLeaseReadCustomLeaseFile() skipped over empty files.
An empty .status file is created when a network is started. This
is because we configure dnsmasq to use our leasehelper. So the
first thing it does it calls it as follows:
DNSMASQ_INTERFACE=virbr0 /usr/libexec/libvirt_leaseshelper init
which causes the leasehelper to create empty virbr0.status file.
If there is only one libvirt network then that is no problem -
there are no other .status files to parse anyway. But if there
are two or more networks then the first empty .status file causes
whole parsing process and subsequently the whole name lookup
process to fail.
Fixes: v5.7.0-rc1~343
Reported-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Getting the hostname of a guest usually requires a in-guest agent,
or generally can be determined only on active domains.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This flag is not implied by g_mkstemp_full, only by g_mkstemp.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Bjoern Walk <bwalk@linux.ibm.com>
Fixes: 4ac4773040
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Glib implementation follows the ISO C99 standard so it's safe to replace
the gnulib implementation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.
This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.
One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').
Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds, this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With g_mkstemp_full, there is no need to distinguish between
mkostemp and mkostemps (no suffix vs. a suffix of a fixed length),
because the GLib function looks for the XXXXXX pattern everywhere
in the string.
Use S_IRUSR | S_IWUSR for the permissions and do not pass O_RDWR
in flags since it's implied.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we use g_strdup everywhere, delete vshStrdup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove all the uses of vshStrdup in favor of GLib's g_strdup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Split the parameters to make changes more readable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Mark the 'str' variable as g_autofree and avoid the need for
a separate cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use 'str' for the allocated copy of the string and 'p'
for the pointer into that string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all uses of VIR_DEFINE_AUTOPTR_FUNC
with G_DEFINE_AUTOPTR_CLEANUP_FUNC in preparation for replacing the
rest.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Also define the macro for building with GLib older than 2.60
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.
The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Replace use of the gnulib base64 module with glib's own base64 API family.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the main glib.h to internal.h so that all common code can use it.
Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.
This was feature was dropped in 2.46.0 with:
commit 3be6ed60aa58095691bd697344765e715a327fc1
Author: Alexander Larsson <alexl@redhat.com>
Date: Sat Jun 27 18:38:42 2015 +0200
Deprecate and drop support for memory vtables
Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in
commit 1f24b36607bf708f037396014b2cdbc08d67b275
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Sep 5 14:37:54 2019 +0100
gmem: clarify that g_malloc always uses the system allocator
Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.
This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.
This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.
Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're using gnulib to get ffs, ffsl, rotl32, count_one_bits,
and count_leading_zeros. Except for rotl32 they can all be
replaced with gcc/clangs builtins. rotl32 is a one-line
trivial function.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
virDomainGetBlockInfo() returns error if called on a disk with no
source (a sourceless disk might be a removable media drive with no
media in it, for instance an empty CDROM or floppy drive).
So far this caused the virsh domblkinfo --all command to abort and
ignore any remaining (not yet displayed) disk devices. This patch
fixes the problem by first checking for existence of a <source>
element in the corresponding XML. If none is found, we avoid calling
virDomainGetBlockInfo() altogether as we know it's bound to fail in
that case.
https://bugzilla.redhat.com/show_bug.cgi?id=1619625
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It is documented that a command to run inside the container can be
passed with the -c arg.
virt-login-shell -c "ls -l /"
This fixes
commit 4feeb2d986
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Aug 1 10:58:31 2019 +0100
tools: split virt-login-shell into two binaries
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a symbol file for either of NSS modules is changed then
subsequent 'make' doesn't regenerate the library, because there
is no implicit dependency between the library and symbols file.
Put an explicit dependency into the Makefile then. Unfortunately,
setting _DEPENDENCIES makes us lose automake's generated
dependencies (see src/Makefile.am:592 for details). But
fortunately, the only dependency we had was _LIBADD variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similarly to gethostbyname3(), the @addr must be freed on return
from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The findLease() function allocates @addr array iff no error
occurred and at least one satisfactory record was found.
Therefore, there is no need to call free() if findLease() failed,
or did not find any records as addr == NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When parsing leases file, appendAddr() is called to append parsed
tuple (address, expiry time, family) into an array. Whilst doing
so, the array is searched for possible duplicate. This is done by
comparing each item of the array by passed @family: if @family is
AF_INET then the item is viewed as IPv4 address. Similarly, if
@family is AF_INET6 then the item is viewed as IPv6 address. This
is not exactly right - the array can contain addresses of both
families and thus the address family of each item of the array
must be considered.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With a nice side-effect of fixing alignment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the command code to use the new type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I opted to alias the 'virDomainType' to 'virshDomain' so that it's
obvious in all cases that this is a virsh-only construct. This is also
somewhat consistent with virsh's use of 'virshDomainFree' wrapper for
the freeing function which actually accepts NULL.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The Perl bindings for libvirt use the test driver for unit tests. This
tries to load the cpu_map/index.xml file, and when run from an
uninstalled build will fail.
The problem is that virFileActivateDirOverride is called by our various
binaries like libvirtd, virsh, but is not called when a 3rd party app
uses libvirt.so
To deal with this we allow the LIBVIRT_DIR_OVERRIDE=1 env variable to be
set and make virInitialize look for this. The 'run' script will set it,
so now build using this script to run against an uninstalled tree we
will correctly resolve files to the source tree.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Apparently a copy/paste error. The net-port-delete help string was in
fact from net-port-dumpxml.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1747826
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The xenapi driver has not seen any development since its initial
contribution 9 years ago. There have been no bug reports, no patches,
and no queries about the driver on the developer or user mailing lists.
Remove the driver from the libvirt sources.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The (pre-copy) bandwidth was historically the only bandwidth we
supported and thus it is called just "bandwidth" in all other places.
E.g., virsh migrate-setspeed or in the migration typed parameter name.
Let's make the new option for virsh migrate consistent.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It appears that all commands were originally fully in alphabetical order
but as new commands were added, they were sometimes inserted out of
order. Fix up all domain commands so that they're in alphabetical order
again.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'guestinfo' command uses the new virDomainGetGuestInfo() API to
query information about the specified domain and print it out for the
user. The output is modeled roughly on the 'domstats' command.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit f15789ec added support for setting postcopy migration bandwidth to
the migrate subcommand. This change does the same for precopy migration.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, whenever there's a regular EOF on the console stream
or an error the virStreamAbort() is called regardless. While this
may not actually break anything, we should call virStreamFinish()
to let the daemon know we've successfully received all the data
and are shutting down the stream gracefully.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Regular VM shutdown triggers the error for existing session of virsh
console and it returns with non-zero exit code:
error: internal error: console stream EOF
The message and status code are misleading because there's no real
error. virStreamRecv returns 0 correctly when EOF is reached.
Existing implementations of esx, fd, and remote streams behave the same
for virStreamFinish and virStreamAbort: they close the stream. So, we
can continue to use virStreamAbort to handle EOF and errors from
virStreamRecv but additonally we can report error if virStreamAbort
fails.
Fixes: 29f2b5248c ("tools: console: pass stream/fd errors to user")
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It may happen that we leave some XATTRs behind. For instance, on
a sudden power loss, the host just shuts down without calling
restore on domain paths. This creates a problem, because when the
host starts up again, the XATTRs are there but they don't reflect
the true state and this may result in libvirt denying start of a
domain.
To solve this, save a unique timestamp (host boot time) among
with our XATTRs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1741140
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This reverts commit f38d553e2d.
Gnulib's make coverage (or init-coverage, build-coverage, gen-coverage)
is not a 1-1 replacement for the original configure option. Our old
--enable-test-coverage seems to be close to gnulib's make build-coverage
except gnulib runs lcov in that phase and the build actually fails for
me even before lcov is run. And since we want to be able to just build
libvirt without running lcov, I suggest reverting to our own
implementation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-By: Eric Blake <eblake@redhat.com>
Substitute in the @sysconfigdir@ value instead of /etc.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If yajl_parse() fails, we try to print an error message. For
that, yajl_get_error() is used. However, its documentation say
that caller is also responsible for freeing the memory it
allocates by using yajl_free_error().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The NSS module has a compile time option which when enabled makes
ERROR() and DEBUG() print messages onto stderr. But now that the
module no longer links with libvirt, we need to include stdio.h
and define NULLSTR().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Due to latest rewrite of NSS module, we are doing yajl parsing
ourselves. This means, we had to introduce couple of callback
that yajl calls. According to its documentation, a callback can
cancel parsing if it returns a zero value. Well, we do just that
in the string callback (findLeasesParserString()). If the JSON
file we are parsing contains a key that we are not interested in,
zero is returned meaning stop all parsing. This is not correct,
because the JSON file can contain some other keys which are not
harmful for our address translation (e.g. 'client-id').
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This completer can be used to complete pool types.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Now that there is no code in virsh-completer.c it doesn't make
much sense to keep those #include-s around. Delete them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
host (e.g. they complete various checkpoint aspects)
into virsh-completer-checkpoint.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
host (e.g. they complete various host aspects)
into virsh-completer-host.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
snapshot (e.g. they complete various snapshot aspects)
into virsh-completer-snapshot.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
secret (e.g. they complete various secret aspects)
into virsh-completer-secret.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
nwfilter (e.g. they complete various nwfilter aspects)
into virsh-completer-nwfilter.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
nodedev (e.g. they complete various nodedev aspects)
into virsh-completer-nodedev.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
networks (e.g. they complete various network aspects)
into virsh-completer-network.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
interfaces (e.g. they complete various interface aspects)
into virsh-completer-interface.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
storage volumes (e.g. they complete various storage volume
aspects) into virsh-completer-volume.c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
storage pools (e.g. they complete various storage pool aspects)
into virsh-completer-pool.c.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
domains (e.g. they complete various domain aspects) into
virsh-completer-domain.c.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In next commits the virsh-completer.c is going to be split into
smaller files. Expose virshCommaStringListComplete() so that it
can still be used from those new files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The proper name is [vir|virsh]NodeDevice* and not Nodedev.
Fortunately, there are only handful of offenders.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The conversion to drop gnulib in the previous patch:
commit 8242ce4f45
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Aug 8 10:23:26 2019 +0100
tools: avoid accidentally using files from gnulib
Missed a few conversions needed for FreeBSD. In particular
netdb.h doesn't pull in sys/socket.h or netinet/in.h
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The AM_CPPFLAGS setting includes the gnulib headers, which
means we can get some replacement functions defined. Since
virt-login-shell and the NSS module intentionally don't link
to gnulib, these replacement functions causes link failures.
This was seen cross-compiling on Debian for example:
virt-login-shell.o: In function `main':
/builds/libvirt/libvirt/build/tools/../../tools/virt-login-shell.c:81: undefined reference to `rpl_strerror'
/builds/libvirt/libvirt/build/tools/../../tools/virt-login-shell.c:66: undefined reference to `rpl_strerror'
/builds/libvirt/libvirt/build/tools/../../tools/virt-login-shell.c:75: undefined reference to `rpl_strerror'
The only way to avoid these replacement gnulib headers is
to drop the -Ignulib/lib flags. We do still want to use
gnulib for configmake.h and intprops.h, but those can be
included via their full path.
We must also stop using internal.h, since that expects
-Ignulib/lib to be on the include path in order to resolve
the verify.h header.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the code does not refer to any libvirt headers,
except internal.h macros, it does not need to link to
any libvirt code, nor gnulib either. The only thing it
needs is yajl.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the plain libc APIs to avoid a dependancy on the main libvirt
code from the nss module.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the plain libc socket APIs to avoid a dependancy on the main
libvirt code from the nss module.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The .leases file is currently loaded using the virLease class,
which in turn uses the virJSON parsing code. This pulls in a
heap of libvirt code (logging, hash tables, etc) which we do
not wish to depend on.
This uses the yajl parser code directly, so the only dep is
yajl and plain libc functions.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The .macs file is currently loaded using the virMacMap class,
which in turn uses the virJSON parsing code. This pulls in a
heap of libvirt code (logging, hash tables, objects, etc) which
we do not wish to depend on.
This uses the yajl parser code directly, so the only dep is
yajl and plain libc functions.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Build a list of mac addresses immediately, so that later code
searching for leases can be simplified and avoid needing to
use the virMacMap object.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the plain libc APIs to avoid a dependancy on the main libvirt
code from the nss module.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the plain libc APIs to avoid a dependancy on the main libvirt
code from the nss module.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the plain libc APIs to avoid a dependancy on the main libvirt
code from the nss module.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that 100% of libvirt code is forbidden in a SUID environment,
we no longer need to worry about whether env variables are
trustworthy or not. The virt-login-shell setuid program, which
does not link to any libvirt code, will purge all environment
variables, except $TERM, before invoking the virt-login-shell-helper
program which uses libvirt.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virt-login-shell binary is a setuid program that takes
no arguments. When invoked it looks at the invoking uid,
resolves it to a username, and finds an LXC guest with the
same name. It then starts the guest and runs the shell in
side the namespaces of the container.
Given this set of tasks the virt-login-shell binary needs
to connect to libvirtd, make various other libvirt API calls.
This is a problem for setuid binaries as various libraries
that libvirt.so links to are not safe. For example, they have
constructor functions which execute an unknown amount of code
that can be influenced by env variables.
For this reason virt-login-shell doesn't use libvirt.so,
but instead links to a custom, cut down, set of source files
sufficient to be a local client only.
This introduces a problem for integrating glib2 into libvirt
though, as once integrated, there would be no way to build
virt-login-shell without an external dependancy on glib2 and
this is definitely not setuid safe.
To resolve this problem, we split the virt-login-shell binary
into two parts. The first part is setuid and does almost
nothing. It simply records the original uid+gid, and then
invokes the virt-login-shell-helper binary. Crucially when
it does this it completes scrubs all environment variables.
It is thus safe for virt-login-shell-helper to link to the
normal libvirt.so. Any things that constructor functions
do cannot be influenced by user control env vars or cli
args.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We'll shortly be renaming the binary to virt-login-shell-helper
and introducing a new tool as virt-login-shell. Renaming the
source file first gives a much more usefull diff for the next
commit.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The public API entry points will call virDispatchError which
will print to stderr by default. We then jump to a cleanup
path which calls virDispatchError again.
We tried to stop the entry points printing to stderr, but
incorrectly called virSetErrorFunc. It needs a real function
that is a no-op, not a NULL function.
Once we fix virSetErrorFunc, then we need to use fprintf in
the cleanup path instead of virDispatchError.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If the 'allowed_users' config setting in virt-login-shell.conf
does not exist, we dereference a NULL pointer resulting in a
crash. We should check for this case and thus ensure the user
is denied access gracefully.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, the way we format PCI address is using printf-s
precision, e.g. "%.4x". This works if we don't want to print any
value outside of bounds (which is usually the case). However,
turns out, PCI domain can be 0x10000 which doesn't work well with
our format strings. However, if we change the format string to
"%04x" then we still pad small values with zeroes but also we are
able to print values that are larger than four digits. In fact,
this format string used by kernel to print a PCI address:
"%04x:%02x:%02x.%d"
The other three format strings (for bus, device and function) are
changed too, so that we use the same format string as kernel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
"virsh console" on macOS cannot attach to a domain and it doesn't matter if
it's local or remote domain:
$ ~ virsh console vm
Connected to domain vm
Escape character is ^]
error: internal error: unable to wait on console condition
The error comes from pthread_cond_wait that fails with EINVAL. The mutex
in the parent is not initialized with pthread_mutex_init and it results
in silent failure of pthead_mutex_lock and the attach failure.
Fixes: 98361cc3b9 ("tools: console: make console virLockableObject")
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Earlier patches mentioned that the initial implementation will prevent
snapshots and checkpoints from being used on the same domain at once.
However, the actual restriction is done in this separate patch to make
it easier to lift that restriction via a revert, when we are finally
ready to tackle that integration in the future.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a bunch of new virsh commands for managing checkpoints in
isolation. More commands are needed for performing incremental
backups, but these commands were easy to implement by modeling heavily
after virsh-snapshot.c. There is no need for checkpoint-revert or
checkpoint-current since those snapshot APIs have no checkpoint
counterpart. Similarly, it is not necessary to change which
checkpoint is current when redefining from XML, since until we
integrate checkpoints with snapshots, there is only a linear chain
(and you can deduce the current checkpoint by instead using
'checkpoint-list --leaves'). Other aspects of checkpoint-list are
also a bit simpler than the snapshot counterpart, in part because we
don't have to cater to back-compat to older API.
Upcoming patches will test these interfaces once the test driver
supports checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need domain_conf or libvirt-{qemu,lxc} in these generic files.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Ever since --parallel-connections option for virsh migrate was
introduced we did not properly check the return value of
vshCommandOptInt. We would set VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS
parameter even if vshCommandOptInt returned 0 (which means
--parallel-connections was not specified) when another int option which
was checked earlier was specified with a nonzero value.
Specifically, running virsh migrate with either
--auto-converge-increment, --auto-converge-initial, --comp-mt-dthreads,
--comp-mt-threads, or --comp-mt-level would set
VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS parameter and if --parallel
option was not used, libvirt would complain
error: invalid argument: Turn parallel migration on to tune it
even though --parallel-connections option was not used at all.
https://bugzilla.redhat.com/show_bug.cgi?id=1726643
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is a very simple completer for completing --cap argument of
nodedev-list command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are more arguments than 'shutdown --mode' that accept a
list of strings separated by commas. 'nodedev-list --cap' is one
of them. To avoid duplicating code, let's separate interesting
bits of virshDomainShutdownModeCompleter() into a function that
can then be reused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Ideally, a software that's translating domain names would iterate
over all addresses the NSS returned, but some software does not
bother (e.g. ping). What happens is that for instance when
installing a guest, it's assigned one IP address but once it's
installed and rebooted it gets a different IP address (because
client ID used for the first DHCP traffic when installing the
guest was generated dynamically and never saved so after reboot
the guest generated new ID which resulted in different IP address
to be assigned). This results in 'ping $domain' not working
properly as it still pings the old IP address. Well, it might -
NSS plugin does not guarantee any order of addresses.
To resolve this problem, we can sort the array just before
returning it to the caller (ping) so that the newer IP addresses
come before older ones.
Reported-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In the nss plugin we have ERROR() macro which by default does
nothing. However, at compile time it can be made to report errors
(this is useful for debugging because by nature of NSS debugging
is hard). Anyway, the appendAddr() function uses @name (which
contains name the caller wants us to resolve) for error
reporting. But the caller findLeaseInJSON() is not passing it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add pool list type flag VIR_CONNECT_LIST_STORAGE_POOLS_ISCSI_DIRECT,
which was forgotten when introducing iscsi-direct pool at f0bf1be3.
https://bugzilla.redhat.com/show_bug.cgi?id=1726609
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We've been doing a terrible job of performing XML validation in our
various API that parse XML with a corresponding schema (we started
with domains back in commit dd69a14f, v1.2.12, but didn't catch all
domain-related APIs, didn't document the use of the flag, and didn't
cover other XML). New APIs (like checkpoints) should do the validation
unconditionally, but it doesn't hurt to continue retrofitting existing
APIs to at least allow the option.
While there are many APIs that could be improved, this patch focuses
on wiring up a new snapshot XML creation flag through all the
hypervisors that support snapshots, as well as exposing it in 'virsh
snapshot-create'. For 'virsh snapshot-create-as', we blindly set the
flag without a command-line option, since the XML we create from the
command line should generally always comply (note that validation
might cause failures where it used to succeed, such as if we tighten
the RNG to reject a name of '../\n'); but blindly passing the flag
means we also have to add in fallback code to disable validation if
the server is too old to understand the flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
virsh snapshot-create-as supports 'file' storage type in --diskspec by default.
But it doesn't support 'block' storage type in the virshParseSnapshotDiskspec().
So if a snapshot on a block device (e.g. LV) was created, the type of
current running storage source in dumpxml is inconsistent with the actual
backend storage source. It will check file-system type mismatch failed
and return an error message of 'Migration without shared storage is unsafe'
when VM performs a live migration after this snapshot.
Considering virsh has to be able to work remotely that recognizing a block device
by prefix /dev/ or by stat() may be not suitable, so adding a "stype" field
for the --diskspec string which will be either "file" or "block".
e.g. --diskspec vda,snapshot=external,driver=qcow2,stype=block,file=/dev/xxx.
Signed-off-by: Liu Dayu <liu.dayu@zte.com.cn>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Firstly, there's no reason to enumerate all XATTRs since they
differ only in the prefix and we can construct them in a loop.
Secondly, and more importantly, the script was still looking for
just one prefix "trusted.libvirt.security" even on FreeBSD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When testing stuff you might want to print the XML. Interlocking it with
no metadata adds exactly 0 value to the user.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag causes undefine to fail if trying to remove a non-RBD disk. Add
a warning about that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
The old flag name confused some users into thinking it's the correct way
to undefine a VM with libvirt (not storage volume) snapshots.
The correct flag in that case is way less obvious: --snapshots-metadata.
Rename the flag (by adding an alias) to something which will promote
looking up the actual purpose of the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Reword the end of the help string to make it more obvious that the VM
must be inactive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Qemu added reporting of virtio balloon new statistics stat-htlb-pgalloc and
stat-htlb-pgfail since qemu-3.0 commit b7b12644297. The value of
stat-htlb-pgalloc represents the number of successful hugetlb page allocations
while stat-htlb-pgfail represents the number of failed ones. Add this
statistics reporting to libvirt.
To enable this feature for vm, guest kenel >= 4.17 is required because
the exporting hugetlb page allocation for virtio balloon is introduced
since 6c64fe7f.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainGetDiskErrors() API copies disk targets into @disks
array that we allocate. But we forgot to free it:
==140828== 16 bytes in 4 blocks are definitely lost in loss record 41 of 242
==140828== at 0x4C2F08F: malloc (vg_replace_malloc.c:299)
==140828== by 0x8C406D9: strdup (in /lib64/libc-2.28.so)
==140828== by 0x5377DD3: virStrdup (virstring.c:966)
==140828== by 0x54C112F: testDomainGetDiskErrors (test_driver.c:3068)
==140828== by 0x55C863D: virDomainGetDiskErrors (libvirt-domain.c:10988)
==140828== by 0x15D1FA: cmdDomBlkError (virsh-domain-monitor.c:1215)
==140828== by 0x17F1A8: vshCommandRun (vsh.c:1335)
==140828== by 0x13489E: main (virsh.c:920)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit a3dbaa364 neglected to add the source-protocol-ver to the
pool-define-as command.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The table included in the sample output for 'list --title' is
unnecessarily wide, which causes man to complain:
warning [p 8, 0.5i]: can't break line
Make the table narrower.
Spotted by Lintian (manpage-has-errors-from-man tag).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Apparently "allow(s) to frobnicate" is not correct English, and
either "allow(s) one to frobnicate" or "allow(s) frobnicating"
should be used instead.
Spotted by Lintian (spelling-error-in-{binary,manpage} tags).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Though it used to be called "Mac OS X" and "OS X" in the past,
it was never "MacOS X" nor "OS-X", and it's just "macOS" now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This code is needed to use readline older than 4.1, but all
our target platforms ship with at least 6.0 these days so we
can safely get rid of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This completer is used to offer shutdown/reboot modes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the console was disconnected due to a connection problem or a problem on the
server side it is convinient to provide the cause to the user. If the error
come from the API then the error is saved in a virsh global variable. However,
since success is returned from virshRunConsole after we reach the waiting stage,
then the error is never reported. Let's track the error in the event loop.
Next after failure we do a cleanup and this cleanup can overwrite
root cause. Thus let's save root cause immediately and then set it to
virsh error after all cleanup is done.
Since we'll be sending the error to the consumer, each failure path from
the event handlers needs to be augmented to provide what error generated
the failure.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
On error in main thread virConsoleShutdown is called which
deletes fd watches/stream callback and yet callbacks can
be called after. Thus we can incorrectly allocate
terminalToStream.data memory and get memory leak for example.
Let's check if console was shutdown in the very beginning of
callbacks.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Stream/fd callbacks accessing console object are called from the
event loop thread and the console object is also accessed from
the main thread so we are better add locking to handlers.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We only check now for virObjectWait failures in virshRunConsole but
we'd better check and for other failures too. And we need to shutdown
console on error in the main thread.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We need to turn console into virObject object because stream/fd callbacks
can be called from the event loop thread after freeing console
in main thread. It is convinient to turn into virLockableObject as
we have mutex in console object.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Add native guest format of BSD hypervisor and VMware/ESX. Quote native
guest format of domxml-from-native for domxml-to-native.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
Refactor code paths which clear strings on cleanup paths to use the
automatic helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A helper function that takes a XML node with a "size"
and "unit" attributes and converts it into a human-readable string.
Reduce the size and number of variables in the parent function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that we have a shared cleanup section everywhere,
delete all the 'error' labels which all contain just 'goto cleanup'
anyway.
Also remove all the 'cleanup' labels that only 'return ret' - we
can simply return NULL instead of jumping to that label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We've been open-coding virStringListFreeCount for cleaning up
the completion list we're building. This had the advantage of
zeoring the pointer afterwards, which is no longer needed
now that we compile the list in 'tmp' instead of 'ret'.
Since all our lists are NULL-terminated anyway, switch to using
virStringListFree via the VIR_AUTOSTRINGLIST macro.
Fixes nearly impossible NULL dereferences in
virshNWFilterBindingNameCompleter
virshNWFilterNameCompleter
virshNodeDeviceNameCompleter
virshNetworkNameCompleter
virshInterfaceNameCompleter
virshStoragePoolNameCompleter
virshDomainNameCompleter
which jumped on the error label after a failed allocation
and a possible one in
virshStorageVolNameCompleter
which jumped there when we fail to fetch the list of volumes.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Unify the cleanup paths for error and success.
Now that 'ret' is only set (from tmp) on the success path,
it is safe to jump right before 'return ret' after processing
the error block.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Construct the potential return value in an array called 'tmp'
and only assign it to 'ret' if we're going to return it.
This will allow us to unify the error and success paths.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Update the wording to note the values for polling are purely dynamic
and won't be saved across domain stop/(re)start or save/restore.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Most of our completers used the pattern:
if ((nITEM = virITEMListAll()) < 0)
return NULL;
but the virDomainSnapshot and virStorageVolume completers were instead
using goto error. If the ListAll fails with -1, the cleanup label was
running a loop of 'size_t i < int nITEM', which is an extreme waste of
CPU cycles. Broken since their introduction in v4.1.
Fixes: f81f8b62
Fixes: 4cb4b649
Reported-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Since test:///default resets state on every connection, writing a test
that covers a sequence of commands must be done from a single
session. But if the test wants to exercise particular failure modes as
well as successes, it can be nice to leave witnesses in the stderr
stream immediately before and after the spot where the expected error
should be, to ensure the rest of the script is not causing errors.
Do this by adding an --err option.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
As the previous commit mentioned, argv mode (such as when you feed
virsh via stdin with <<\EOF instead of via a single shell argument)
didn't permit comments. Do this by treating any command name token
that starts with # as a comment which silently eats all remaining
arguments to the next newline or semicolon.
Note that batch mode recognizes unquoted # at the start of any word as
a command as part of the tokenizer, while this patch only treats # at
the start of the command word as a comment (any other # remaining by
the time vshCommandParse() is processing things was already quoted
during the tokenzier, and as such was probably intended as the actual
argument to the command word earlier in the line).
Now I can do something like:
$ virsh -c test:///default <<EOF
# setup
snapshot-create-as test s1
snapshot-create-as test s2
# check
snapshot-list test --name
EOF
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Continuing from what I did in commit 4817dec0, now I want to write a
sequence that is self-documenting. So I need comments :)
Now I can do something like:
$ virsh -c test:///default '
# setup
snapshot-create-as test s1
snapshot-create-as test s2
# check
snapshot-list test --name
'
Note that this does NOT accept comments in argv mode, another patch
will tackle that.
(If I'm not careful, I might turn virsh into a full-fledged 'sh'
replacement? Here's hoping I don't go that far...)
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Separate the algorithm for which list members to vist (which is
generic and can be shared with checkpoints, provided that common
filtering bits are either declared with the same value or have a
mapping from public API to common value) from the decision on which
members to return (which is specific to snapshots). The typedef for
the callback function feels a bit heavy here, but will make it easier
to move the common portions in a later patch.
As part of the refactoring, note that the macros for selecting filter
bits are specific to listing functionality, so they belong better in
virdomainsnapshotobjlist.h (missed in commit 9b75154c).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This command is fully async. Note that users can use virsh event to be
notified of the guest actually removing the device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Mention that successful return does not equal to device being detached
similarly as we do at the API level.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Only active pools can be refreshed. But our completer offers just
all pool, even inactive ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Despite the misleading name, these were supposed to be used
with a System V style init; however, none of the platforms we
target is using that kind of init anymore: almost all Linux
distributions have switched to systemd, those that haven't
(such as Gentoo and Alpine) are mostly using OpenRC with
custom init scripts, and the BSDs have been doing their own
thing all along.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We provide a custom configure option --enable-test-coverage and
'make cov' target to generate code coverage reports. However gnulib
already provides a 'make coverage' which 'just works' and doesn't
require a special configure option.
This drops our custom implementation in favor of 'make coverage'.
Reports are now output to cov/index.html
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For snapshots, virsh already has a (shockingly naive [1]) client-side
topological sorter with the --tree option. But as a series of REDEFINE
calls must be presented in topological order, it's worth letting the
server do the work for us, especially since the server can give us a
topological sorting with less effort than our naive client
reconstruction.
[1] The XXX comment in virshSnapshotListCollect() about --tree being
O(n^3) is telling; https://en.wikipedia.org/wiki/Topological_sorting
is an interesting resource describing Kahn's algorithm and other
approaches for O(n) topological sorting for anyone motivated to use a
more elegant algorithm than brute force - but that doesn't affect this
patch.
For now, I am purposefully NOT implementing virsh fallback code to
provide a topological sort when the flag was rejected as unsupported;
we can worry about that down the road if users actually demonstrate
that they use new virsh but old libvirt to even need the fallback.
(The code we use for --tree could be repurposed to be such a fallback,
whether or not we keep it naive or improve it to be faster - but
again, no one should spend time on a fallback without evidence that we
need it.)
The test driver makes it easy to test:
$ virsh -c test:///default '
snapshot-create-as test a
snapshot-create-as test c
snapshot-create-as test b
snapshot-list test
snapshot-list test --topological
snapshot-list test --descendants a
snapshot-list test --descendants a --topological
snapshot-list test --tree
snapshot-list test --tree --topological
'
Without any flags, virsh does client-side sorting alphabetically, and
lists 'b' before 'c' (even though 'c' is the parent of 'b'); with the
flag, virsh skips sorting, and you can now see that the server handed
back data in a correct ordering. As shown here with a simple linear
chain, there isn't any other possible ordering, so --tree mode doesn't
seem to care whether --topological is used. But it is possible to
compose more complicated DAGs with multiple children to a parent
(representing reverting back to a snapshot then creating more
snapshots along those divergent execution timelines), where it is then
possible (but not guaranteed) that adding the --topological flag
changes the --tree output (the client-side --tree algorithm breaks
ties based on alphabetical sorting between two nodes that share the
same parent, while the --topological sort skips the client-side
alphabetical sort and ends up exposing the server's internal order for
siblings, whether that be historical creation order or dependent on a
random hash seed). But even if the results differ, they will still be
topologically correct.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
