The virDomainNumatuneNodeSpecified() function does not write into
passed @numatune pointer, it just reads from it. Therefore, the
argument should be const, which allows this function to be called
from places where virDomainNuma is already const (e.g. domain
validation code).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The parser makes the values mandatory and also the qemu code implements
actions for those values. The formatter skips them though. Since
format+parse is used to copy the XML at startup a definition with those
values can't be started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2203709
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
One of our examples in the 'formatbackup.rst' page shows following
config:
<disk name='vda' backup='yes'/>
The schema didn't allow it though. Fix the schema as the internals were
supposed to support it (except for the bug fixed in previous patches).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the 'disk->store' property is already allocated which happens e.g.
when the disk is described by the backup XML but the optional filename
is not filled in 'virDomainBackupDefAssignStore' would not fill in the
default location.
Fix the logic to do it also if a 'virStorageSource' categorizes as
empty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow users controlling the multi-channel mode by adding a
'multichannel' property parsed for USB audio devices and wire up the
support in the qemu driver.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we allow configuring the 'poll-max-ns', 'poll-grow', and
'poll-shrink' parameters of qemu iothreads only during runtime and they
are not persisted. Add XML machinery to persist them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A new enum type "Default" has been added for Input bus.
The logic that handled default input bus types in
virDomainInputParseXML() has been moved to a new function
virDomainInputDefPostParse() in domain_postparse.c
Link to Issue: https://gitlab.com/libvirt/libvirt/-/issues/8
Signed-off-by: K Shiva <shiva_kr@riseup.net>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We exit early if poolOptions->formatToString is false.
Fixes: 9dadc73029
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Throughout all of our network driver code we assume that
dnsmasqPid of value -1 means the network has no dnsmasq process
running. There are plenty of calls to:
virNetworkObjSetDnsmasqPid(obj, -1);
or:
pid_t dnsmasqPid = virNetworkObjGetDnsmasqPid(obj);
if (dnsmasqPid > 0) ...;
Now, a virNetworkObj is created via virNetworkObjNew() which
might as well set this de-facto default value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
That's already the case in practice, but it's a better
experience for the user if we reject this configuration
outright instead of silently ignoring part of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
igb is a new network device which will be introduced with QEMU 8.0.0.
It is a successor of e1000e so it has PCIe interface and is understands
virtio-net headers as e1000e does.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a small kludge in the parser to avoid unnecessarily
blocking incoming migration from a range of recent libvirt
releases.
https://bugzilla.redhat.com/show_bug.cgi?id=2184966
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In an effort to separate the validation steps from the Parse stage,
a few validation checks of virDomainGraphicsListenDef have been moved from
virDomainGraphicsListenDefParseXML() in domain_conf.c to
virDomainGraphicsDefListensValidate() in domain_validate.c
Signed-off-by: K Shiva <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function always returns 0. Remove the return value and refactor
caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify use of the function by determining the number of elements
inside the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's more stuff than device info to clear nowadays. Drop the
misleading comment. Shorten the comment saying that device info is freed
elsewhere when 'parentnet' is present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities generated on OSX hosts with 'hvf' accelerator will not
pass schema testing as the 'hvf' type was not allowed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainHostdevDefClear' must clear the pointers too as it can be
invoked multiple times on the same object e.g. inside
qemuDomainRemoveHostDevice once via virDomainHostdevDefFree which skips
freeing the object if it's used via <interface> and thus has a 'net'
definition corresponding to it, and then subsequently via
virDomainNetDefFree.
Fix it by clearing the pointer along with freeing it.
Fixes: d9e4075d4e
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2182961
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The reason why it was in postparse in the first place was so
that we could could automatically enable the secure-boot feature
in some cases, but that no longer happens so we can finally move
it to the proper location.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we're adding information obtained from the firmware
descriptor to the domain XML, this will happen automatically
whenever a firmware that has the enrolled-keys feature ends up
being selected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The combination of explicit firmware paths, which we now
produce in all cases, and firmware autoselection knobs is
explicitly rejected by libvirt 8.6.0 and newer.
Right now we produce inherently migratable XML in all cases,
since we always strip those bits, but that's going to change
soon. To prepare for that, make sure that we always skip the
problematic elements and attributes when preparing a
migratable XML.
The destination will simply receive a fully specified firmware
configuration, which is indistinguishable from one that was
manually provided by the user and is thus accepted by any old
version of libvirt, regardless of whether or not firmware
autoselection was used on the source host.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
libvirt 8.6.0 introduced these checks and very clearly delineated
two possible firmware selection scenarios: manual firmware
selection, where the user is responsible for providing all
information, and firmware autoselection, where a list of desired
features is provided and everything else is handled by libvirt.
In the interest of maintaining the clear separation between these
two scenarios, setting most attributes when firmware autoselection
is active will result in the configuration being rejected.
This works fine, but is unnecessarily restrictive: in most cases,
the additional information that the user has provided matches
the information that libvirt would have discovered on its own by
looking at firmware descriptors, and asking the user to scrub it
from the XML only result in pointless friction.
Remove these checks entirely.
Unsurprisingly, this results in a few test cases that were
rejected until now to suddenly start working and producing
sensible results.
The firmware-auto-efi-loader-path-nonstandard test case is
notable: while we can now enable the xml2xml part of the test,
the xml2argv part is still failing, although in a slightly
different way. This is expected: since the firmware binary is a
non-standard one, libvirt is unable to figure out the missing
information from a firmware descriptor, and the configuration
is still ultimately an invalid one. However, if we were to find
such a configuration on disk at daemon startup, we would not
ignore it completely and instead would offer the user a chance
to fix it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
over-writing a variable in inner while-loop without freeing previous memory
leaks it over time.
To fix this, we can just change scope of bank variable to the inner loop.
Signed-off-by: Shaleen Bathla <shaleen.bathla@oracle.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fixes: 5c84485439
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The newly added luks-any rbd encryption format in qemu
allows for opening both LUKS and LUKS2 encryption formats.
This commit enables libvirt uses to use this wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit enables libvirt users to use layered encryption
of RBD images, using the librbd encryption engine.
This allows opening of an encrypted cloned image
whose parent is encrypted with a possibly different encryption key.
To open such images, multiple encryption secrets are expected
to be defined under the encryption XML tag.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Some APIs (migration, save/restore, snapshot, ...) require a domain to
be suspended temporarily. In case resuming the domain fails, the domain
will be unexpectedly left paused when the API finishes. This situation
is reported via VIR_DOMAIN_EVENT_SUSPENDED event with
VIR_DOMAIN_EVENT_SUSPENDED_API_ERROR detail. But we do not have a
corresponding reason for VIR_DOMAIN_PAUSED state and the reason would
remain set to the value used when the domain was paused. So the state
reason would suggest the operation is still running.
This patch changes the state reason to a new VIR_DOMAIN_PAUSED_API_ERROR
to make it clear the API that paused the domain already finished, but
failed to resume the domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='nbd' name='foo'>
<host name='example.org' port='6000'/>
<reconnect delay='10'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than storing the video type as an integer, use the proper enum
type within the struct.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In virDomainVideoModelDefParseXML(), use the virXMLProp* functions
rather than reimplementing them with virXPath* functions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function allows you to specify a default value to return if the
property is not found rather than always setting *result to 0.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Factor out a separate function to parse out the <model> element for
video devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ensure that new virDomainVideoDef objects have their 'type' set to
VIR_DOMAIN_VIDEO_TYPE_DEFAULT and remove places that this value is set
after construction. Since virDomainVideoDefNew() uses g_new0() allocate
the instance, all fields are initialized to 0.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make all callers always pass a valid pointer which in turn allows us to
remove return value check from the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make all callers always pass a valid pointer which in turn allows us to
remove return value check from the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function doesn't use XPath at all. Don't pass the context to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When fetching stats for a domain's <interface/>, or when setting
up its QoS, we can face two situations:
1) the device "shares" the host view, meaning each packet
sent/received on the interface by a domain is accounted for in
the same category on the host, or
2) the device is at the other side, and a packet send by a
domain, is in fact packet received on the host.
This fact affects whether we need to swap RX/TX values when
fetching stats, or setting up QoS. We have this convenient helper
function (virDomainNetTypeSharesHostView()), which returns to
which category given interface type falls into.
Now, for unmanaged type='ethernet' our options are quite limited,
because it's user's responsibility to set up the host side of the
interface. And it can be just anything. Fortunately, we have
another convenience function (virNetDevMacVLanIsMacvtap()), which
determines whether given interface is a macvtap (which is
notoriously known for falling into the first category).
Let's use it to help virDomainNetTypeSharesHostView() determine
the view more accurately.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2175449
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
All of the drivers will reject this value, at least for now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The default is raw, which corresponds to the historical
behavior and is also the only accepted value, at least for
now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now, this results in loader->nvram being NULL, which is
reasonable: loader->nvramTemplate is stored separately, so if
the <nvram> element doesn't contain a path there is really no
useful information inside it.
However, this is about to change, so we will find ourselves
needing to hold on to loader->nvram even when no path is
present. Change the firmware handling code so that such a
scenario is dealt with appropriately.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now we just allocate the object, so the only advantage is
that invocations are shorter and look a bit nicer.
Later on, its introduction will pay off by letting us change
things in a single spot instead of all over the library.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already handle the <nvram> element in a separate helper,
which is cleaner than having all the logic in the top-level
virDomainLoaderDefParseXML() function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Outline what the function does, especially the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Changing any of the attributes of an <interface>'s <backend> would
require removing and re-adding the interface for the new setting to
take effect, so fail any update-device that changes anything in
<backend>
Resolves: https://bugzilla.redhat.com/2169245
Signed-off-by: Laine Stump <laine@redhat.com>
It was used briefly and subsequently removed in 3592b81c4c.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Integrated PCI devices can be either PCIe (virtio-iommu) or
conventional PCI (pvpanic-pci). Right now libvirt will refuse
to assign an address on pcie.0 for the latter, but that's an
undesirable limitation that we can easily remove.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainDefAddConsoleCompat in post parsing step appends a stub console
of type VIR_DOMAIN_CHR_TYPE_NULL to ch VMs' Domain XML. Cloud-hypervisor's
deviceValidateCallback (chValidateDomainDeviceDef) checks that the type of
stub console is not of type VIR_DOMAIN_CHR_TYPE_PTY and throws an error.
This commit introduces NO_STUB_CONSOLE feature check to Domain features and
uses it to skip adding stub console to ch VMs.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virDomainDeviceType as type and update all switch statements which
didn't mention all possible values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the code into a new function named virDomainDeviceDefParseType. The
separation will make it easier to change the type of the 'type' field in
side of virDomainDeviceDef.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the code to use a bitmap with an enum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This also prevents a potential memleak when multiple elements would be
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This also prevents a potential memleak when multiple elements would be
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use the helper designed to find the subelement. A slight semantic
difference after this patch is that the first <zpci> element will be
considered instead of the last, but only one is expected in a valid XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Note that the schema doesn't allow us to represent the two branches of
optional <devnode type='dev'> and zero or more <devnode type='link'>
definitions, so I've merged them under the <zeroOrMore> case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'osxen' RNG type defines options for the <os> element in certain
modes. Allow interleaving of subelements recursively.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow interleave of the top level sub-elements as well as the
subelements in the 'host-certificates' mode. Note that '<interleave>'
doesn't work properly if there's multiple definitions of the same
sub-element in the interleave so for this patch I chose to '<group>' the
'certificate' subelements. Another options would require us to stop
enforcing that there's exactly 3 of them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainNetDef struct has privateData (which is currently
used by QEMU driver to store FDs opened during cmd line building
phase and pass them onto cmd line).
Soon, we will need to store additional information that needs to
survive daemon restart. Let's introduce machinery for parsing and
formatting privateData.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In domain_conf.c there's virDomainChrSourceModeTypeFromString()
which is open coded. Let's rewrite it using VIR_ENUM_DECL() +
VIR_ENUM_IMPL() combo.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it's true that the virDomainNetVhostuserMode enum is used
solely in virDomainNetDefParseXML(), its placement just above the
function is rather unfortunate. Let's put it at the beginning of
the file with the rest of the enum declarations/implementations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <source/> child element of <mac/> is formatted the old way.
Switch to virXMLFormatElement().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For VIR_DOMAIN_NET_TYPE_{SERVER,CLIENT,MCAST,UDP} we need to put
(optionally) 'address' attribute and 'port' attributes of
<source/> element. But the way we currently do that is
particularly verbose. It can be shortened using
virBufferEscapeString().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The <source/> child element of <interface/> is formatted the old
way. Switch to virXMLFormatElement().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The <guest/> child element of <interface/> is formatted the old
way. Switch to virXMLFormatElement(). Since this element is used
in LXC driver, this part of the function is tested by
lxcxml2xmltest (specifically lxc-ethernet* test cases).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The <tune/> child element of <interface/> is formatted the old
way. Switch to virXMLFormatElement().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The @attrBuf variable in virDomainNetDefFormat() is named too
broadly. It holds attribute buffer to the <target/> element.
Rename it to @targetAttrBuf then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is already possible with qemu, and actually already happening with
q35 machines and a specified watchdog since q35 already includes a
watchdog we do not include in the XML. In order to express such
posibility multiple watchdogs need to be supported.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changes in this commit:
- docs: formatdomaincaps.rst
- conf: crypto related domain caps
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce crypto device like:
<crypto model='virtio' type='qemu'>
<backend model='builtin' queues='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</crypto>
<crypto model='virtio' type='qemu'>
<backend model='lkcf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</crypto>
Currently, crypto model supports virtio only, type supports qemu only
(vhost-user in the plan). For the qemu type, backend supports modle
builtin/lkcf, and the queues is optional.
Changes in this commit:
- docs: formatdomain.rst
- schemas: domaincommon.rng
- conf: crypto related domain conf
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Two of the messages referred to 'backend type' when dealing
with the source type and one mentioned the 'client' attribute
from an earlier iteration of the patches, even though the attribute
was later changed to 'connect'.
https://bugzilla.redhat.com/show_bug.cgi?id=2063723
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use g_autoptr() for virNWFilterDef and virNWFilterRuleDef and remove
unnecessary label.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This check is done when VM is defined but doesn't take into account what
cgroups version is currently used on the host system so it doesn't work
correctly.
To make proper check at this point we would have to figure out cgroups
version while defining a VM but that will still not guarantee that the
VM will start correctly in the future as the host may be rebooted with
different cgroups version.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This attribute was added to support setting the --interface option for
passt, but in a post-push/pre-9.0-release review, danpb pointed out
that it would be better to use the existing <source dev='xxx'/>
attribute to set --interface rather than creating a new attribute (in
the wrong place). So we remove backend/upstream, and change the passt
commandline creation to grab the name for --interface from source/dev.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In our current code the function is not called with NULL argument, but
we should follow our common practice and make it safe anyway.
Reported by coverity:
/src/conf/domain_conf.c: 2635 in virDomainNetPortForwardFree()
2629 {
2630 size_t i;
2631
2632 if (pf)
2633 g_free(pf->dev);
2634
>>> CID 404359: Null pointer dereferences (FORWARD_NULL)
>>> Dereferencing null pointer "pf".
2635 for (i = 0; i < pf->nRanges; i++)
2636 g_free(pf->ranges[i]);
2637
2638 g_free(pf->ranges);
2639 g_free(pf);
2640 }
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>