This implements XML config to represent a subset of the features
supported by 'passt' (https://passt.top), which is an alternative
backend for emulated network devices that requires no elevated
privileges (similar to slirp, but "better").
Along with setting the backend to use passt (via <backend
type='passt'/> when the interface type='user'), we also support
passt's --log-file and --interface options (via the <backend>
subelement logFile and upstream attributes) and its --tcp-ports and
--udp-ports options (which selectively forward incoming connections to
the host on to the guest) via the new <portForward> subelement of
<interface>. Here is an example of the config for a network interface
that uses passt to connect:
<interface type='user'>
<mac address='52:54:00:a8:33:fc'/>
<ip address='192.168.221.122' family='ipv4'/>
<model type='virtio'/>
<backend type='passt' logFile='/tmp/xyzzy.log' upstream='eth0'/>
<portForward address='10.0.0.1' proto='tcp' dev='eth0'>
<range start='2022' to='22'/>
<range start='5000' end='5099' to='1000'/>
<range start='5010' end='5029' exclude='yes'/>
</portForward>
<portForward proto='udp'>
<range start='10101'/>
</portForward>
</interface>
In this case:
* the guest will be offered address 192.168.221.122 for its interface
via DHCP
* the passt process will write all log messages to /tmp/xyzzy.log
* routes to the outside for the guest will be derived from the
addresses and routes associated with the host interface "eth0".
* incoming tcp port 2022 to the host will be forwarded to port 22
on the guest.
* incoming tcp ports 5000-5099 (with the exception of ports 5010-5029)
to the host will be forwarded to port 1000-1099 on the guest.
* incoming udp packets on port 10101 will be forwarded (unchanged) to
the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Initial support for network devices using passt (https://passt.top)
for the backend connection will require:
* new attributes of the <backend> subelement:
* "type" that can have the value "passt" (to differentiate from
slirp, because both slirp and passt will use <interface
type='user'>)
* "logFile" (a path to a file that passt should use for its logging)
* "upstream" (a netdev name, e.g. "eth0").
* a new subelement <portForward> (described in more detail later)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This will allow us to call parser/formatter functions with a pointer
to just the backend part.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fits better with the element containing the value (<driver>), and
allows us to use virDomainNetBackend* for things in the <backend>
element.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unfortunately unlike with DAC we can't simply ignore labelling for the
FD and it also influences the on-disk state.
Thus we need to relabel the FD and we also store the existing label in
cases when the user will request best-effort label replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When starting up a VM with FD-passed images we need to look up the
corresponding named FD set and associate it with the virStorageSource
based on the name.
The association is brought into virStorageSource as security labelling
code will need to access the FD to perform selinux labelling.
Similarly when startup is complete in certain cases we no longer need to
keep the copy of FDs and thus can close them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The helper will be used in various places that need to check that a disk
source struct is using FD passing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'fdgroup' will allow users to specify a passed FD (via the
'virDomainFDAssociate()' API) to be used instead of opening a path.
This is useful in cases when e.g. the file is not accessible from inside
a container.
Since this uses the same disk type as when we open files via names this
patch also introduces a hypervisor feature which the hypervisor asserts
that code paths are ready for this possibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a new argument type for testQemuInfoSetArgs named ARG_FD_GROUP
which allows users to instantiate tests with populated FD passing hash
table.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
For FD-passing of disk sources we'll need to keep the FDs around.
Introduce a data type helper based on a g_object so that we get
reference counting.
One instance will (due to security labelling) will need to be part of
the virStorageSource struct thus it's declared in the storage_source_conf
module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When deleting external snapshots the operation may fail at any point
which could lead to situation that some disks finished the block commit
operation but for some disks it failed and the libvirt job ends.
In order to make sure that the qcow2 images are in consistent state
introduce new element "<snapshotDeleteInProgress/>" that will mark the
disk in snapshot metadata as invalid until the snapshot delete is
completed successfully.
This will prevent deleting snapshot with the invalid disk and in future
reverting to snapshot with the invalid disk.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When post-copy migration fails, the domain stays running on the
destination with a VIR_DOMAIN_RUNNING_POSTCOPY_FAILED reason. Both the
state and the reason can later be rewritten in case the domain gets
paused for other reasons (such as an I/O error). Thus we need a separate
place to remember the post-copy migration failed to be able to resume
the migration.
https://bugzilla.redhat.com/show_bug.cgi?id=2111948
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parameter was only used to select which states correspond to an
active or failed post-copy migration. But these states are either
applicable to both operations or the check would just paper over a code
bug in case of an impossible combination of state and operation. By
dropping the check we can make the code simpler and also reuse existing
virDomainObjIsFailedPostcopy function and only check for active
post-copy states.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert to a switch instead of a bunch of 'if (type == ...).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new connect close callbacks for domains will be represented by a
virObject associated with the domain object itself.
To simplify handling the pointer to the close callback data will be done
by an immutable pointer allocated directly when allocating the
corresponding virDomainObj struct.
This patch adds the 'closecallbacks' field to virDomainObj and a
corresponding callback to allocate it into virDomainXMLOption.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function can't fail so there's no point in returning anything.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a helper which will return a list of all domain objects inside
of the list without filtering and thus without the need to lock
individual members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use the new style which doesn't require re-aligning the argument list
once you change the return type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The virDomainCapsEnumFormat() function does not return anything
but zero and none of its callers is interested in the failure
anyways. Switch its return type from integer to void.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We are formatting <enum/> element and its children using
virBufferAddLit(), virBufferAsprintf(), virBufferAdjustIndent(),
etc. Well, we can avoid that when switching to
virXMLFormatElement().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's nothing qemu specific about
qemuDomainCapsFeatureFormatSimple() and in fact, the function
lives in hypervisor agnostic location and thus mustn't have qemu
prefix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce a new backend type 'external' for connecting to a swtpm daemon
not managed by libvirtd.
Mostly in one commit, thanks to -Wswitch and the way we generate
capabilities.
https://bugzilla.redhat.com/show_bug.cgi?id=2063723
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function is now unused. Remove it to dissuade anybody from trying to
use it in the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Error message reports that the guest has '0' NUMA nodes
configured when trying to attach a memory device to a guest with
no NUMA nodes. This may be a little misleading because '0' can
also be node's id. A more friendly way is to directly report
that the guest has no NUMA nodes.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2142519
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The virNodeDeviceGetPCIVPDDynamicCap() function is called from
virNodeDeviceGetPCIDynamicCaps() and therefore has to be a wee
bit more clever about adding VPD capability. Namely, it has to
remove the old one before adding a new one. This is how other
functions called from virNodeDeviceGetPCIDynamicCaps() behave
as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2143235
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When setting up QoS for a domain <interface/>, or when reporting
its statistics we may need to swap TX/RX values. This is all
explained in comment to virDomainNetTypeSharesHostView().
However, this function claims that VIR_DOMAIN_NET_TYPE_ETHERNET
also shares the 'host view', meaning the TX/RX values must be
swapped. But that's not true.
An easy reproducer is to start a domain with two <interface/>-s:
one type of network, the other of type ethernet and configure the
same <bandwidth/> for both. Reversed setting can then be observed
(e.g. via tc).
Reported-by: Oleg Vasilev <oleg.vasilev@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Register virDomainMemoryDefFree() to do the cleanup.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
This is new allocator for virDomainMemoryDef struct which also
sets some default values: @model and @targetNode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
On aarch64 the 'id' file is not present for CPU cache information in
sysfs. This causes the local stateful hypervisor drivers to fail to
initialize capabilities:
virStateInitialize:657 : Initialisation of cloud-hypervisor state driver failed: no error
The 'no error' is because the 'virFileReadValueNNN' methods return
ret==-2, with no error raised, when the requeted file does not exist.
None of the callers were checking for this scenario when populating
capabilities. The most graceful way to handle this is to skip the
cache bank in question. This fixes failure to launch libvirt drivers
on certain aarch64 hardware.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/389
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This lets us simplify the cleanup paths when populating the host cache
bank information in capabilities XML.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Extend hypervisor capabilities to include sgx feature. When available,
the hypervisor supports launching an VM with SGX on Intel platfrom.
The SGX feature tag privides additional details like section size and
sgx1 or sgx2.
Signed-off-by: Haibin Huang <haibin.huang@intel.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-6.2 introduced support for the hv-avic enlightenment which allows
to use Hyper-V SynIC with hardware APICv/AVIC enabled.
Implement the libvirt support for it.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/402
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for storing private TPM-related data. The first private data
will be related to the capability of the started swtpm indicating whether
it is capable of migration with a shared storage setup since that requires
support for certain command line flags that were only becoming available
in v0.8.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The high-bandwidth memory (HBM) in cache mode might be greater than
UINT_MAX of cache per NUMA node, so change to unsigned long long.
Signed-off-by: Lin Yang <lin.a.yang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The privatedata.rng file was accidentally left uninstalled, but it's
referenced by other schema files effectively breaking validation of XMLs
in new installations.
Change to libvirt.spec is not needed as we include all installed schemas
via a wildcard.
Fixes: d8ceacdc87
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Glib can internally convert only unix timestamps up to
9999-12-31T23:59:59 (253402300799). Validate that the user doesn't use
more than that as otherwise we cause an assertion failure:
(process:1183396): GLib-CRITICAL **: 14:25:00.906: g_date_time_format: assertion 'datetime != NULL' failed
Additionally adjust the schema to allow bigger values as we use
'unsigned long long' to parse the value.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2128993
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt internally (e.g. in the status XML) stores additional data for
various objects described by the XML. The data is usually stored in
<privateData> or similar sub-elements.
This patch adds possibility for internal schema files to describe the
<privateData> elements by schema while still disallowing them for the
public schema.
This patch adds definitions for private data of <disk> and the
corresponding storage source of a disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainEventTunableNew is supposed to consume and free @params, but it
failed to always set @params to NULL to make sure the caller doesn't try
to free the same memory again.
Fixes: d95c79fbd0
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Trying to parse <driver> node which does not exist makes no sense.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename 'diskTarget' to 'diskTargetDev' and then 'target' to
'diskTarget'.
This will make it less confusing when overriding the definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller passes 'node' argument originating from an XPath lookup
for the 'sysinfo' element, so there's no point in checking it once more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller passes 'node' argument originating from an XPath lookup
for the 'chassis' element, so there's no point in checking it once more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Register automatic cleanup for virSysinfoChassisDef and use it to
refactor the cleanup code paths in virSysinfoChassisParseXML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the unneeded linebreaks after assignment operator. Only one line
exceeds 80 colums and just by 4 characters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller passes 'node' argument originating from an XPath lookup
for the 'system' element, so there's no point in checking it once more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Register automatic cleanup for virSysinfoSystemDef and use it to
refactor the cleanup code paths in virSysinfoSystemParseXML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the unneeded linebreaks after assignment operator. Only one line
exceeds 80 colums and just by 4 characters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller passes 'node' argument originating from an XPath lookup
for the 'bios' element, so there's no point in checking it once more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Register automatic cleanup for virSysinfoBIOSDef and use it to refactor
the cleanup code paths in virSysinfoBIOSParseXML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The callers store only an 'unsigned int' in the field. Convert it to the
proper type including parser/formatter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'unsigned long long' instead of 'unsigned long' and fix the parser
and formatter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adjust the parser and switch statements to go with it.
Note that the XEN/libxl drivers had a 'default:' case for few of the
swtich statements so this patch blindly expands it to what it would be
in those cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adjust the parser and add missing switch cases to make the complier
happy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, adjust the XML parser to use virXMLPropEnum and add
the VIR_DOMAIN_TIMER_TICKPOLICY_LAST enum case to all appropriate
'switch' statements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adjust the type and the corresponding parser to use virXMLPropEnum.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free the 'def' variable and remove the 'cleanup' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The struct used 'unsigned long' variables which we try to avoid due to
being different size on different architectures.
Convert the struct and use virXMLPropULongLong instead of virXPathULong
when parsing the XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The loop inside virNetDevVlanParse fetches multiple attributes from the
element. Convert it to use the virXMLProp* helpers, which also
simplifies error reporting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the proper convertor function and refactor error reporting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Parse the 'prefix' field directly and adjust the the error message
format strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function extracts multiple attributes form a single element. Modify
the function to stop using multiple XPath lookups.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the two uses of virXPathLong to proper
virXMLPropInt/virXMLPropLongLong so that virXPathLong can be removed in
an upcoming patch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to the proper function for parsing integer variant of a hex
number via XPath and spell out properly that the argument is 'unsigned
int'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the parser into a helper function named 'virCPUDefParseXMLCache'
and use the virXMLProp* helpers instead of multiple XPath lookups.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code only wants to refuse cases where more than one 'numatune'
element is present which can be achieved by using 'virXPathBoolean'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will require that the XML XPath query returns a string
for conversion in virXPathInt. Convert all the XPaths used with
virNodeDevCapsDefParseIntOptional which uses virXPathInt internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the rest of the XPath expressions used with virXPathUInt
directly to convert via string(). This will become mandatory in upcoming
patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will require that the XML XPath query returns a string
for conversion in virXPathUInt. Convert all the XPaths used with
virNodeDevCapsDefParseUInt which uses virXPathUInt internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the 'string()' conversion is used the number is parsed inside
libvirt by our internal helpers which work on integers in contrast to
when 'number()' is used and libxml2 uses a 'double' variable internally.
On the upper extremes of the 64 bit variables the double precision
variable doesn't have enough precision to represent each distinct
integer and thus could cause problems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'bus', 'slot' and 'function' are unsigned int variables parsed as
unsigned int, but were formated as signed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix the function argument to properly spell out 'unsigned int' and use
virXPathUInt instead of virXPathULong and a temporary value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce the VIR_VOL_XML_PARSE_VALIDATE parser flag and wire it up into
the validator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Allow callers to request XML validation against the schema. All callers
for now pass 'false'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The custom namespace parameters for 'rbd' and 'netfs' pool types were
not included in the interleave statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'type' element was outside of the 'interleave' definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While for now the 'mirror' element is output only, the idea was to allow
it to be used for input too to restore the mirror job if that becomes
the necessity. Allowing interleaving of the subelements can be done
regardless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'model' and 'target' element can be freely moved around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow interleaving in the 'qemucdevSrcDef' definition which is shared
by all places using character device as backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As qemu becomes more modularized, it is important for libvirt to advertise
availability of the modularized functionality through capabilities. This
change adds channel devices to domain capabilities, allowing clients such
as virt-install to avoid using spicevmc channel devices when not supported
by the target qemu.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree in capabilities.c for some pointers still using manual cleanup,
and remove unnecessary cleanup.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As qemu becomes more modularized, it is important for libvirt to advertise
availability of the modularized functionality through capabilities. This
change adds USB redirect devices to domain capabilities, allowing clients
such as virt-install to avoid using redirdev devices when not supported
by the target qemu.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The validation of a '<filesystem type='mount'>' device fails if the
elements inside are not ordered in the order in the schema despite using
<interleave>. This is a bug in libxml2's validator as removing the
'<optional>' property from the definition of the 'type' attribute with
'mount' variable fixes the problem.
I've reported it as another instance of a seemingly related issue:
https://gitlab.gnome.org/GNOME/libxml2/-/issues/131
Meanwhile libvirt can re-arrange the schema by extracting the common
bits into a new definition and referencing them from each of the choice
groups explicitly.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/392
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Even though several CPU models from various vendors are reported as
usable on a given host, user may still want to use only those that match
the host vendor. Currently the only place where users can check the
vendor of each CPU model is our CPU map, which is considered internal
and users should not really be using it directly. So to allow for such
filtering we now advertise the vendor of each CPU model in domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the function always returns 0, we can just return void and make
callers simpler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the seldom used helper in favor of full virXMLParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function provided just checking of the root XML node name which can
be easily moved into the caller wich doesn't do that already and
checking of the pointers which is trivial. Remove the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the two outstanding uses to virXMLParseFileCtxt as they always
pass a filename and remove the helper macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most callers use virXMLParseStringCtxt. Convert the last use case
and remove the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLParse's features to validate the top level element and fetch
the XPath context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainObjParseFile is the only caller of virDomainObjParseNode.
The code can be merged into it, simplified by using virXMLParse and
the function removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace virNetworkDefParseString/File by direct calls to
virNetworkDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers can be easily converted to call virNetworkDefParseXML
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function was not used. Remove it and merge virInterfaceDefParse
into virInterfaceDefParseString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers be easily made to call virInterfaceDefParseXML directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the thin wrappers virNodeDeviceDefParseString/File by directly
calling the main parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers be easily made to call virNodeDeviceDefParseXML directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace virNWFilterDefParseString/File with the common function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLParse to fetch the XML context and validate the top level XML
element name so that virNWFilterDefParseNode is no longer needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename virDomainBackupDefParse to virDomainBackupDefParseXML and use
it in place of virDomainBackupDefParseNode. This is possible as
virXMLParse can be used to replace XPath context allocation and root
node checking.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the virSecretDefParseFile/String shims by calls to
virSecretDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename it to virSecretParseXML and move the root node validation and
context fetching into the caller (by properly calling virXMLParse).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Check the root XML node name and fetch XPath context by properly
configuring virXMLParse. Callers can use virDomainSnapshotDefParse
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the virStorageVolDefParseFile/String shim functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Proper use of virXMLParse replaces everything the function provides.
Callers can use virStorageVolDefParseXML instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the virStoragePoolDefParseString/File thin wrappers by
virStoragePoolDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace it by proper use of virXMLParse to validate the root node and
allocate the context. The use in the test driver can be directly
replaced by virStoragePoolDefParseXML as both are validated.
The change to the storage driver isn't trivial though as it requires
careful xpath context juggling to parse the nested volumes properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the two helpers virNetworkPortDefParseString/File with the
common helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is exported but used only intenally, additionally
everything it did for the only caller can be replaced by properly using
virXMLParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the virNWFilterBindingDefParseString/File thin wrappers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fetch the XPath context and validate the node by using virXMLParse's
features.
This allows to completely remove virNWFilterBindingDefParseNode as
all callers now properly validate the root element name and have a XPath
context handy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the redundant root node checking and XPath context creation by
using virXMLParse properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The generic helper also has helper code to validate the root element and
create an XPath context. Many places in the code duplicate code for
doing these operations.
Extend the helper to provide all arguments and fix all callers.
In many cases this patch refactors the passing of the 'validate'
field into a separate variable to avoid quirky looking arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Apart from it being a long time ago the 'openvz' driver is also rarely
used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Parse the element only when the network type requires it and assign it
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specifically rework of parsing of the 'managed' attribute simplifies the
code greatly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base whether virtualport is supported for a given interface on a new
variable named 'virtualport_flags' which also configures the parser for
the virtualports subelement and fill it in the appropriate interface
type branches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The moved code is pure validation of semantics of the definition and not
actual parsed values. Move it to the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This also removes the confusing use of variables named 'tmpNode' and
'tmp_node' right next to each other.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the code fetching the model of the net device before the main code
parsing individual device types so that the data is available before the
upcoming refactor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the individual 'if' clauses to a switch statement.
By moving the check that 'source_node' is non-null inside of each case
rather we will be able to move more type specific code into the switch
statement when it will be refactored in subsequent patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain cases it's inconvenient to move the XPath's context current
node in the caller. Add a 'node' argument and override it inside the
function. VIR_XPATH_NODE_AUTORESTORE handles the cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Do the XPath fetches first as they don't require cleanup and rename
'cleanup' to 'error' and take it only on failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use two separate variables for the nodes and count instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The variables are only used in code paths which can't fail after they
are allocated.
Additionally decrease scope of the variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace ad-hoc logic that fills the default by use of the proper helper
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the code into virDomainNetDefParseXMLDriver. Some local
variables were renamed and the scope decreased.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it into an independent block and move temporary variables locally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some values were extracted into a temporary variable and then assigned
to the definition later without a modification.
Directly assign them instead.
One slight modification was done to 'ifname' which was cleared in
certain cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the last two variables having inline cleanup to automatic
cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The callback struct does not always have to be set which could
cause a dereferencing of a NULL pointer. This patch adds check
against NULL in missing places before dereferencing.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In case of variable 'oldjob' (job structure) in
qemuProcessReconnect() the cb pointer was just copied from the
existing job structure in virDomainObjPreserveJob(). This caused
the job and oldjob sharing the same pointer, which was later
freed at the end of the qemuProcessReconnect() function by
automatic call to virDomainObjClearJob(). This caused an invalid
read in and subsequent daemon crash as the job structure was
trying to read cb which had been already freed.
This patch changes the copying to g_memdup that allocates
different pointer, which can be later safely freed.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For prevent memory leak and easier to use, So change
virDomainEventTunableNew to get virTypedParameterPtr *params
and set it = NULL.
Signed-off-by: lu zhipeng <luzhipeng@cestc.cn>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The 'cb' and 'jobDataPrivateCb' pointers are stored in the job object
but made point to the memory owned by the virDomainXMLOption struct in
the callers.
Since the 'virdomainjob' module isn't in control the lifetime of the
virDomainXMLOption, which in some cases is freed before the domain job
data, freed memory would be dereferenced in some cases.
Copy the structs from virDomainXMLOption to ensure the lifetime. This is
possible since the callback functions are immutable.
Fixes: 84e9fd068c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Adding supposedly secure cleanup for secrets in anything related to the
XML parser is pointless because there are multiple other un-sanitized
copies of the full XML and the XML parser state at the very least.
Similarly in case RPC was used to transport the XML the RPC buffers are
not sanitized.
Additionally this patch was incomplete as it didn't sanitize the
password in the cleanup function for virDomainGraphicsAuthDef.
This reverts commit 51f8130d78
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although these and functions in the following two patches are for
now just being used by the qemu driver, it makes sense to have all
begin job functions in the same file.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjEndJob() into
src/conf/virdomainjob as universal virDomainObjEndJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjBeginJob() into
src/conf/virdomainjob as universal virDomainObjBeginJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch uses the job object directly in the domain object and
removes the job object from private data of all drivers that use
it as well as other relevant code (initializing and freeing the
structure).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds the generalized job object into the domain object
so that it can be used by all drivers without the need to extract
it from the private data.
Because of this, the job object needs to be created and set
during the creation of the domain object. This patch also extends
xmlopt with possible job config containing virDomainJobObj
callbacks, its private data callbacks and one variable
(maxQueuedJobs).
This patch includes:
* addition of virDomainJobObj into virDomainObj (used in the
following patches)
* extending xmlopt with job config structure
* new function for freeing the virDomainJobObj
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There may be a case that the callback structure will exist with
no callbacks (following patches). This patch adds check for
specific callbacks before using them.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The following patches move job object as a member into the domain
object. Because of this, domain_conf (where the domain object is
defined) needs to import the file with the job object.
It makes sense to move jobs to the same level as the domain_conf:
into src/conf/
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The password may not be valid in the error branch, but for
higher security, it's better to clean up the memory before
freeing it.
Signed-off-by: jiangjiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
All of the properties use '-1' as default and the code omits formatting
them when the property is '-1'. Additionally subsequent validation code
rejects all other negative values anyways.
Since we've never formatted '-1' into an XML formatted by libvirt we can
make the parser more strict, as we will never fail to parse existing
on-disk libvirt-owned XMLs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2121627
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move some checks earlier so that they are not tucked at the back of the
block of code doing the actual parsing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'index' is parsed to fit into a signed int but not have negative values.
virXMLPropInt can do that internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor all cases which use virXMLPropInt and then subsequently check
that the parsed value is not '-1'/negative by using the VIR_XML_PROP_NONNEGATIVE
flag for virXMLPropInt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code attempted to report an error if the user added the 'index'
attribute to the 'target' element, but neglected to actually return an
error code.
Fix it by using the VIR_XML_PROP_NONNEGATIVE flag for virXMLPropInt
which refuses user passed negative numbers.
Fixes: 020dd80ecb
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Code was not indented properly for one of the nested conditions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the code to use virXMLFormat element so that we can avoid a
bunch of unnecessary checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the PCI controller code into virDomainControllerDefFormatPCI.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Typecast the controller type variable and add all cases to the switch
statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The '<inactiveDomain>' element stores the next-start definition of a VM
on snapshot. It was not covered by the schema when it was introduced.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2121276
Fixes: 152c165d34
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move all definition under the <domain> element into a separate
definition so that it can be referenced from elements with other names.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the overrides into a single file so that later patches can add
another top level element 'inactiveDomain' used in snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code (since 448be8f706) useds 'vport_ops' in XML.
Later commit cc17f09246 added schema for 'vports_ops' (extra 's').
Fix the schema and the corresponding docs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2121262
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
