As all other free functions, NULL should be accepted. Even though
there currently is no caller that would pass NULL, there will be
in future patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
the lxc driver uses virNetDevGenerateName() for its veth device names
since patch 2dd0fb492, so it should be using virNetDevReserveName()
during daemon restart/reconnect to skip over the device names that are
in use.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In virLXCProcessSetupInterfaceTap, containerVeth needs to be freed on
failure.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Simplify virNetDevVethCreate by using common GenerateName/ReserveName
functions.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Commit 729a06c41 added code to the LXC driver (patterned after similar
code in the QEMU driver) that called
virNetDevMacVlanReserveName(net->ifname) for all type='direct'
interfaces during a libvirtd restart, to prevent other domains from
attempting to use a macvtap device name that was already in use by a
domain.
But, unlike a QEMU domain, when an LXC domain creates a macvtap
device, that device is almost immediately moved into the namespace of
the container (and it's then renamed, but that part isn't
important). Because of this, the LXC driver doesn't keep track (in
net->ifname) of the name used to create the device (as the QEMU driver
does).
The result of this is that if libvirtd is restarted while there is an
active LXC domain that has <interface type='direct'>, libvirtd will
segfault (since virNetDevMacVLanReserveName() doesn't check for a NULL
pointer).
The fix is to just not call that function in the case of the LXC
driver, since it is pointless anyway.
Fixes: 729a06c41a
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The next objective is to move virDomainDeviceDefValidate() to
domain_validate.c. First let's move all the static helpers.
The net device validation functions are used across multiple
drivers, so let's move them separately first.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Attempting to create a lxc domain with <seclabel type='none'/> fails
virsh --connect lxc:/// create distro_nosec.xml
error: Failed to create domain from distro_nosec.xml
error: unsupported configuration: Security driver model '(null)' is not available
Commit 638ffa2228 adjusted the logic for setting a driver's default
security model.
The lxc driver does not set a default security driver model in the XML
parser config, causing seclabels of type='none' to have a null model.
The lxc driver's security manager is initialized in lxcStateInitialize()
by calling lxcSecurityInit(). Use the model of this manager as the
default in the XML parser config.
For the record, this is a regression caused by commit 638ffa2228, which
changed the logic for setting a driver's default security model. The
qemu driver was adjusted accordingly, but a similar change was missed
in the lxc driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If starting an container fails, the virLXCProcessStop() is
called. But since vm->def->id is not set until libvirt_lxc is
spawned (the domain's ID is PID of that process),
virLXCProcessStop() returns early as virDomainObjIsActive()
returns false. But doing so leaves behind resources reserved for
the containers during the startup process. Most notably, hostdevs
are not re-attached to the host, the domain's transient XML is
not removed, etc.
To resolve this, virLXCProcessCleanup() is called in this case.
However, it is modified to accept @flags which allows caller to
run only specific cleanups (depending how far in container
creation the failure occurred). There is plenty of cleanups which
don't need this guard because either they detect a NULL pointer
or try to release an unique resource.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Glib provides g_auto(GStrv) which is in-place replacement of our
VIR_AUTOSTRINGLIST.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function only returns zero or aborts, so it might as well be void.
This has the added benefit of simplifying the code that calls it.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
As preparation for g_autoptr() we need to change the function to take
only virCgroupPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
CVE-2020-25637
Add a requirement for domain:write if source is set to
VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_AGENT.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
There have been some reports that, due to libvirt always trying to
assign the lowest numbered macvtap / tap device name possible, a new
guest would sometimes be started using the same tap device name as
previously used by another guest that is in the process of being
destroyed *as the new guest is starting.
In some cases this has led to, for example, the old guest's
qemuProcessStop() code deleting a port from an OVS switch that had
just been re-added by the new guest (because the port name is based on
only the device name using the port). Similar problems can happen (and
I believe have) with nwfilter rules and bandwidth rules (which are
both instantiated based on the name of the tap device).
A couple patches have been previously proposed to change the ordering
of startup and shutdown processing, or to put a mutex around
everything related to the tap/macvtap device name usage, but in the
end no matter what you do there will still be possible holes, because
the device could be deleted outside libvirt's control (for example,
regular tap devices are automatically deleted when the qemu process
terminates, and that isn't always initiated by libvirt but could
instead happen completely asynchronously - libvirt then has no control
over the ordering of shutdown operations, and no opportunity to
protect it with a mutex.)
But this only happens if a new device is created at the same time as
one is being deleted. We can effectively eliminate the chance of this
happening if we end the practice of always looking for the lowest
numbered available device name, and instead just keep an integer that
is incremented each time we need a new device name. At some point it
will need to wrap back around to 0 (in order to avoid the IFNAMSIZ 15
character limit if nothing else), and we can't guarantee that the new
name really will be the *least* recently used name, but "math"
suggests that it will be *much* less common that we'll try to re-use
the *most* recently used name.
This patch implements such a counter for macvtap/macvlan, replacing
the existing, and much more complicated, "ID reservation" system. The
counter is set according to whatever macvtap/macvlan devices are
already in use by guests when libvirtd is started, incremented each
time a new device name is needed, and wraps back to 0 when either
INT_MAX is reached, or when the resulting device name would be longer
than IFNAMSIZ-1 characters (which actually is what happens when the
template for the device name is "maccvtap%d"). The result is that no
macvtap name will be re-used until the host has created (and possibly
destroyed) 99,999,999 devices.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the macro no longer includes the 'ignore_value'
statement, stop putting another empty statement after it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Many of our functions start with a DEBUG statement.
Move the statements after declarations to appease
our coding style.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split those initializations that depend on a statement
above them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of our augeas files are generated during meson setup into build
directory and we were running augeas tests only for these files.
However, we have some other augeas and config files that are not
modified during meson setup and they are only in source directories.
In order to run tests for these files we need to provide different path
to both source and build directories.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Refer to the notion of mount propagation instead which describes
the actual behaviour more clearly.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The two sides of a PTY can be referred to as primary and secondary
TTYs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "access control list" better describes the concept involved.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Given our supported platform matrix, we can safely assume that
all the capability constants we need are defined by the system
headers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Given our supported platform matrix, we can safely assume that
all the clone constants we need are defined by the system
headers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Given our supported platform matrix, we can safely assume that
all the mount constants we need are defined by the system
headers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since 5b82f7f3, @path should have been placed inside the for loop
since it'd need to be free'd for each pass through the loop; otherwise,
we'd leak like a sieve.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is convenience macro, use it more. This commit was generated
using the following spatch:
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
...
- old = ctxt->node;
... when != old
- ctxt->node = old;
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old = ctxt->node;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
... when != old
- ctxt->node = old;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a few places we use 0 and false, or 1 and true interchangeably
even though the variable or return type in question is boolean.
Fix those places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Catch the individual usage not removed in previous commits.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainGenerateMachineName() function doesn't belong in
src/conf/ really, because it has nothing to do with domain XML
parsing. It landed there because of lack of better place in the
past. But now that we have src/hypervisor/ the function should
live there. At the same time, the function name is changed to
match new location.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This follows the example set by libvirtd, and makes it easier for
the admin to tweak the timeout or disable it altogether.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While not terribly useful in general, tweaking each daemon's
timeout (or disabling it off altogether) is a valid use case which
we can very easily support while being consistent with what already
happens for libvirtd. This is a first step in that direction.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far, when using the qemu:///embed driver, management
applications can't chose whether they want to register their
domains in machined or not. While having that option is certainly
desired, it will require more work. What we can do meanwhile is
to generate names that include part of hash of the root
directory. This is to ensure that if two applications using
different roots but the same domain name (and ID) start the
domain no clashing name for machined is generated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This commit is related to RTC timer device too. HPET is being shared
from host device through `localtime` clock. This timer is available
creating a new timer using `hpet` name.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit share host Real Time Clock device (rtc) into LXC containers
to support hardware clock. This should be available setting up a `rtc`
timer under clock section. Since this option is not emulated, it should
be available only for `localtime` clock. This option should be readonly
due to security reasons.
Before:
root# hwclock --verbose
hwclock from util-linux 2.32.1
System Time: 1581877557.598365
Trying to open: /dev/rtc0
Trying to open: /dev/rtc
Trying to open: /dev/misc/rtc
No usable clock interface found.
hwclock: Cannot access the Hardware Clock via any known method.
Now:
root# hwclock
2020-02-16 18:23:55.374134+00:00
root# hwclock -w
hwclock: ioctl(RTC_SET_TIME) to /dev/rtc to set the time failed:
Permission denied
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'path' could be accessed uninitialized. Fix it by using g_autofree which
also mandates initialization.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically threads are given a name based on the C function,
and this name is just used inside libvirt. With OS level thread
naming this name is now visible to debuggers, but also has to
fit in 15 characters on Linux, so function names are too long
in some cases.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The default memlock limit is 64k which is not enough to start a single
VM. The requirements for one VM are 12k, 8k for eBPF map and 4k for eBPF
program, however, it fails to create eBPF map and program with 64k limit.
By testing I figured out that the minimal limit is 80k to start a single
VM with functional eBPF and if I add 12k I can start another one.
This leads into following calculation:
80k as memlock limit worked to start a VM with eBPF which means there
is 68k of lock memory that I was not able to figure out what was using
it. So to get a number for 4096 VMs:
68 + 12 * 4096 = 49220
If we round it up we will get 64M of memory lock limit to support 4096
VMs with default map size which can hold 64 entries for devices.
This should be good enough as a sane default and users can change it if
the need to.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1807090
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are a lots of strings being handled inside some LXC functions.
They can be moved to g_autofree to avoid declaring a return value to get
proper code cleanups. This commit is changing functions from
lxc_{controller,cgroup,fuse} only.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Include unistd.h in all files that use it, instead
of relying on it being pulled in via virutil.h
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Historically, this file was a dump for most of our helper
functions and needed almost everywhere.
With the introduction of virfile.h and virstring.h,
and more importantly, virenum.h and the introduction
of GLib, that is no longer true.
Remove its include from C files that don't even use it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Another vircgroup helper to avoid code repetition between
the LXC and QEMU driver.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
lxcDomainSetMemoryParameters() and qemuDomainSetMemoryParameters()
has duplicated chunks of code that can be put in a new
helper.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new helper avoids more code repetition inside
lxcDomainSetBlkioParameters() and qemuDomainSetBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the introduction of virDomainDriverMergeBlkioDevice() in a
previous patch, it is now clear that lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters() uses the same loop to set cgroup
blkio parameter of a domain.
Avoid the repetition by adding a new helper called
virDomainCgroupSetupDomainBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
lxcDomainParseBlkioDeviceStr() and qemuDomainParseBlkioDeviceStr()
are the same function. Avoid code repetition by putting the code
in a new helper.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
lxcDomainMergeBlkioDevice() and qemuDomainMergeBlkioDevice()
are the same functions. This duplicated code can't be put in
the existing domain_cgroup.c since it's not cgroup related.
This patch introduces a new src/hypervisor/domain_driver.c to
host this more generic code that can be shared between virt
drivers. This new file is then used to create a new helper
called virDomainDeivceMergeBlkioDevice() to eliminate the code
repetition mentioned above. Callers in LXC and QEMU files
were updated.
This change is a preliminary step for more code reduction of
cgroup related code inside lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuSetupCgroupVcpuBW() and lxcSetVcpuBWLive() shares the
same code to set CPU CFS period and quota. This code can be
moved to a new virCgroupSetupCpuPeriodQuota() helper to
avoid code repetition.
A similar code is also executed in virLXCCgroupSetupCpuTune(),
but without the rollback on error. Use the new helper in this
function as well since the 'period' rollback, if not a
straight improvement for virLXCCgroupSetupCpuTune(), is
benign. And we end up cutting more code repetition.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code that calls virCgroupSetCpuShares() and virCgroupGetCpuShares()
is repeated in 4 different places. Let's put it in a new
virCgroupSetupCpuShares() to avoid code repetition.
There's a reason of why we execute a Get in the same value we
just executed Set, explained in detail by commit 97814d8ab3.
Let's add a gist of the reasoning behind it as a comment in
this new function as well.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code from qemuSetupCgroupCpusetCpus() and virLXCCgroupSetupCpusetTune()
can be centralized in a new helper called virCgroupSetupCpusetCpus().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virLXCCgroupSetupMemTune() and qemuSetupMemoryCgroup() shares
duplicated code that can be put in a new helper to avoid
code repetition.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is duplicated code between virt drivers that needs to
be moved to avoid code repetition. In the case of duplicated
code between lxc_cgroup.c and qemu_cgroup.c a common place
would be utils/vircgroup.c. The problem is that this would
introduce /conf related definitions that shouldn't be imported
to vircgroup.c, which is supposed to be a place for utilitary
cgroups functions only. And syntax-check would forbid it anyway
due to cross-directory includes being used.
An alternative would be to overload domain_conf.c, which already
contains all the definitions required. But that file is already
crowded with XML handling code and we wouldn't do any favors to
it by putting more utilitary, non-XML parsing/formatting code
there.
In [1], Cole suggested a 'domain_cgroup' file to host common code
between lxc_cgroup and qemu_cgroup, and Daniel suggested a
'src/hypervisor' dir to host these type of files. This patch
introduces src/hypervisor/domain_cgroup.c and, to get started,
introduces a new virDomainCgroupSetupBlkio() function to host shared
code between virLXCCgroupSetupBlkioTune() and qemuSetupBlkioCgroup().
[1] https://www.redhat.com/archives/libvir-list/2019-December/msg00817.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are code repetition of set() and get() blkio device
parameters across lxc and qemu files. Use the new vircgroup
helpers to trim the repetition a bit.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch pushes the isolatedPort setting from the <interface> down
all the way to the callers of virNetDevBridgeAddPort(), and sets
BR_ISOLATED on the port (using virNetDevBridgePortSetIsolated()) after
the port has been successfully added to the bridge.
Signed-off-by: Laine Stump <laine@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
After LXC version 3, some settings were changed to new names. Same as
network. LXC introduced network indexes and changed IPv{4,6} addresses
fields. Before, users should only pass `lxc.network.ipv4` to define an
IPv4 address. Now, on version 3, users need to pass
`lxc.net.X.ipv4.address` to specify the same thing. Same for IPv6.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To configure network settings using config file, legacy LXC settings
require starting them with 'lxc.network.type' entry. If someone
accidentally starts with 'lxc.network.name', libvirt will crash with
segfault. This patch checks if this case is happening.
Sample invalid settings:
lxc.network.link = eth0
lxc.network.type = phys
lxc.network.name = eth1
lxc.network.ipv4 = 192.168.122.2/24
lxc.network.ipv4.gateway = 192.168.122.1
Now, libvirt only see error without segmentation fault.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All our supported Linux distros now have this header.
It has never existed on FreeBSD / macOS / Mingw.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most code now uses the virProcess / virCommand APIs, so
the need for sys/wait.h is quite limited. Removing this
include removes the dependency on GNULIB providing a
dummy sys/wait.h for Windows.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Replace all the cases that only supply the length
and do not care about matching a suffix, as well
as that one test case that does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Domain definition is useless now inside network structure. This pointer
was required because new network definition was being added each time
that a new network type appeared. So, this should be processed into
old function `lxcNetworkParseDataType()`. Now, as it was moved to an
array, it can be handle together each interface pointer.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
LXC version 3 or higher introduced indexes for network interfaces.
Libvirt should be able to parse entries like `lxc.net.2.KEY`. This
commit adds functions to parse this type of field. That's why array
structures are so important this time.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Struct lxcNetworkParseData is being used as a single pointer which
iterates through LXC config lines. It means that it will be applied as a
network each time that a new type appears. After, the same struct is
used to populate a new network interface. This commit changes this logic
to multiple lxcNetworkParseData to move this strcuture to an array. It
makes more sense if we are using indexes to fill interface settings.
This is better to improve code clarity.
This commit still introduces *Legacy() functions to keep support of
network old style definitions.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now, that every use of virAtomic was replaced with its g_atomic
equivalent, let's remove the module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a large number of different header files that
are related to the sockets APIs. The virsocket.h header
includes all of the relevant headers for Windows and UNIX
in one convenient place. If virsocketaddr.h is already
included, then there's no need for virsocket.h
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The intent here is to allow the virt drivers to be run directly embedded
in an arbitrary process without interfering with libvirtd. To achieve
this they need to store all their configuration & state in a separate
directory tree from the main system or session libvirtd instances.
This can be useful for doing testing of the virt drivers in "make check"
without interfering with the user's own libvirtd instances.
It can also be used for applications using KVM/QEMU as a piece of
infrastructure to build an service, rather than for general purpose
OS hosting. A long standing example is libguestfs, which would prefer
if its temporary VMs did show up in the main libvirtd VM list, because
this confuses apps such as OpenStack Nova. A more recent example would
be Kata which is using KVM as a technology to build containers.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
LXC driver is not able to retrieve IP addresses from domains. This
function was not implemented yet. It can be done using DHCP lease and
ARP table. Different from QEMU, LXC does not have an agent to fetch
this info, but other sources can be used.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt's original atomic ops impls were largely copied
from GLib's code at the time. The only API difference
was that libvirt's virAtomicIntInc() would return a
value, but g_atomic_int_inc was void. We thus use
g_atomic_int_add(v, 1) instead, though this means
virAtomicIntInc() now returns the original value,
instead of the new value.
This rewrites libvirt's impl in terms of g_atomic_int*
as a short term conversion. The key motivation was to
quickly eliminate use of GNULIB's verify_expr() macro
which is not a direct match for G_STATIC_ASSERT_EXPR.
Long term all the callers should be updated to use
g_atomic_int* directly.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since there is no guest agent in LXC world (yet), we can
implement _LEASE flag only.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This will be needed in the future for allocating private data.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are some functions which pass virConnectPtr around for one
reason and one reason only: to obtain virLXCDriverPtr in the end.
Might replace the argument and pass a pointer to the driver right
from the start.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There is plenty of distributions that haven't switched to
systemd nor they force their users to (Gentoo, Alpine Linux to
name a few). With the daemon split merged their only option is to
still use the monolithic daemon which will go away eventually.
Provide init scripts for these distros too.
For now, I'm not introducing config files which would correspond
to the init files except for libvirtd and virtproxyd init scripts
where it might be desirable to tweak the command line of
corresponding daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adjust virLXCDriverGetCapabilities to fill in driver->caps if it is
empty, regardless of the passed 'refresh' value. This matches the
pattern used in virQEMUDriverGetCapabilities
This fixes LXC XML startup parsing for me
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The NUMA cells are stored directly in the virCapsHostPtr
struct. This moves them into their own struct allowing
them to be stored independantly of the rest of the host
capabilities. The change is used as an excuse to switch
the representation to use a GPtrArray too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No impl of this callback requires the virCapsPtr anymore.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To enable the virCapsPtr parameter to the post parse method to be
eliminated, the drivers must fetch the virCapsPtr from their own
driver via the opaque parameter, or use an alternative approach
to validate the parsed data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The XML parser currently calls virCapabilitiesDomainDataLookup during
parsing to find the domain capabilities matching the triple
(virt type, os type, arch)
This is, however, bogus with the QEMU driver as it assumes that there
is an emulator known to the default driver capabilities that matches
this triple. It is entirely possible for the driver to be parsing an
XML file with a custom emulator path specified pointing to a binary
that doesn't exist in the default driver capabilities. This will,
for example be the case on a RHEL host which only installs the host
native emulator to /usr/bin. The user can have built a custom QEMU
for non-native arches into $HOME and wish to use that.
Aside from validation, this call is also used to fill in a machine type
for the guest if not otherwise specified. Again, this data may be
incorrect for the QEMU driver because it is not taking account of
the emulator binary that is referenced.
To start fixing this, move the validation to the post-parse callbacks
where more intelligent driver specific logic can be applied.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.
Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.
Finally enforce checking of the return type and mark all parameters
as non-NULL.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
<interface> devices (virDomainNetDef) are a bit different from other
types of devices in that their actual type may come from a network (in
the form of a port connection), and that doesn't happen until the
domain is started. This means that any validation of an <interface> at
parse time needs to be a bit liberal in what it accepts - when
type='network', you could think that something is/isn't allowed, but
once the domain is started and a port is created by the configured
network, the opposite might be true.
To solve this problem hypervisor drivers need to do an extra
validation step when the domain is being started. I recently (commit
3cff23f7, libvirt 5.7.0) added a function to peform such validation
for all interfaces to the QEMU driver -
qemuDomainValidateActualNetDef() - but while that function is a good
single point to call for the multiple places that need to "start" an
interface (domain startup, device hotplug, device update), it can't be
called by the other hypervisor drivers, since 1) it's in the QEMU
driver, and 2) it contains some checks specific to QEMU. For
validation that applies to network devices on *all* hypervisors, we
need yet another interface validation function that can be called by
any hypervisor driver (not just QEMU) right after its network port has
been created during domain startup or hotplug. This patch adds that
function - virDomainActualNetDefValidate(), in the conf directory,
and calls it in appropriate places in the QEMU, lxc, and libxl
drivers.
This new function is the place to put all network device validation
that 1) is hypervisor agnostic, and 2) can't be done until we know the
"actual type" of an interface.
There is no framework for validation at domain startup as there is for
post-parse validation, but I don't want to create a whole elaborate
system that will only be used by one type of device. For that reason,
I just made a single function that should be called directly from the
hypervisors, when they are initializing interfaces to start a domain,
right after conditionally allocating the network port (and regardless
of whether or not that was actually needed). In the case of the QEMU
driver, qemuDomainValidateActualNetDef() is already called in all the
appropriate places, so we can just call the new function from
there. In the case of the other hypervisors, we search for
virDomainNetAllocateActualDevice() (which is the hypervisor-agnostic
function that calls virNetworkPortCreateXML()), and add the call to our
new function right after that.
The new function itself could be plunked down into many places in the
code, but we already have 3 validation functions for network devices
in 2 different places (not counting any basic validation done in
virDomainNetDefParseXML() itself):
1) post-parse hypervisor-agnostic
(virDomainNetDefValidate() - domain_conf.c:6145)
2) post-parse hypervisor-specific
(qemuDomainDeviceDefValidateNetwork() - qemu_domain.c:5498)
3) domain-start hypervisor-specific
(qemuDomainValidateActualNetDef() - qemu_domain.c:5390)
I placed (3) right next to (2) when I added it, specifically to avoid
spreading validation all over the code. For the same reason, I decided
to put this new function right next to (1) - this way if someone needs
to add validation specific to qemu, they go to one location, and if
they need to add validation applying to everyone, they go to the
other. It looks a bit strange to have a public function in between a
bunch of statics, but I think it's better than the alternative of
further fragmentation. (I'm open to other ideas though, of course.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In this case, the virNetDevBandwidthPtr that is returned is not to a
region within the virDomainNetDef arg, but points elsewhere (the
NetDef has the pointer, not the entire object), so technically it's
not necessary to make the return value a const, but it's a bit
disingenuous to *not* do it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Glib implementation follows the ISO C99 standard so it's safe to replace
the gnulib implementation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Previously we generated all source files into $srcdir which is no
longer true. This means that we can't just blindly prepend each
source file with $srcdir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Previously we generated all source files into $srcdir which is no
longer true. This means that we can't just blindly prepend each
source file with $srcdir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The enum name sounds too generic. It in fact describes the capabilities
of the process, thus add 'Process' to the name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
"#include vircgroup.h" appears in both lxc_cgroup.h and
lxc_cgroup.c, and lxc_cgroup.c contains lxc_cgroup.h,
so remove the duplicate declarations.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 0985a9597b we stopped
distributing generated source file. This is done by prepending
binary_SOURCES variable with "nodist_". However, there is a typo
- the prefix is "nodst_" instead of "nodist_".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This affects more than src/Makefile.am as the rule to generate source
files for protocols is generic for all sub-directories.
Affected files are:
src/admin/admin_protocol.{h,c}
src/locking/lock_protocol.{h,c}
src/logging/log_protocol.{h,c}
src/lxc/lxc_monitor_protocol.{h,c}
src/remote/{lxc,qemu,remote}_protocol.{h,c}
src/rpc/{virkeepalive,virnet}protocol.{h,c}
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 66e2adb2ba moved the code and the coverity comment which now
was useless since the context was in lxcContainerSetupPivotRoot.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The callers expect '1' on a successful probe,
so return 1 just like VIR_STRDUP would.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The use of $(AUG_GENTEST) as a dependency in the makefiles is
a problem because this was assumed to be the filename of the
script, but is in fact a full shell command line.
Split it into two variables, so it can be correctly used for
dependencies.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Also define the macro for building with GLib older than 2.60
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove all usage of ATTRIBUTE_NORETURN in favor of GLib's
G_GNUC_NORETURN.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In upcoming commits, virSecurityManagerSetAllLabel() will perform
rollback in case of failure by calling
virSecurityManagerRestoreAllLabel(). But in order to do that, the
former needs to have @migrated argument so that it can be passed
to the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.
The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the main glib.h to internal.h so that all common code can use it.
Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.
This was feature was dropped in 2.46.0 with:
commit 3be6ed60aa58095691bd697344765e715a327fc1
Author: Alexander Larsson <alexl@redhat.com>
Date: Sat Jun 27 18:38:42 2015 +0200
Deprecate and drop support for memory vtables
Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in
commit 1f24b36607bf708f037396014b2cdbc08d67b275
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Sep 5 14:37:54 2019 +0100
gmem: clarify that g_malloc always uses the system allocator
Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.
This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.
This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.
Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1755303
With the recent work in daemon split and socket activation
daemons can come and go. They can and will be started many times
during a session which results in objects being autostarted
multiple times. This is not optimal. Use
virDriverShouldAutostart() to determine if autostart should be
done or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A virDomainNetDef object in a domain's nets array might contain a
virDomainHostdevDef, and when this is the case, the domain's hostdevs
array will also have a pointer to this embedded hostdev (this is done
so that internal functions that need to perform some operation on all
hostdevs won't leave out the type='hostdev' network interfaces).
When a network device was updated with virDomainUpdateDeviceFlags(),
we were replacing the entry in the nets array (and free'ing the
original) but forgetting about the pointer in the hostdevs array
(which would then point to the now-free'd hostdev contained in the old
net object.) This often resulted in a libvirtd crash.
The solution is to add a function, virDomainNetUpdate(), called by
qemuDomainUpdateDeviceConfig(), that updates the hostdevs array
appropriately along with the nets array.
Resolves: https://bugzilla.redhat.com/1558934
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Neither virThreadInitialize or virThreadOnExit do anything since we
dropped the Win32 threads impl, in favour of win-pthreads with:
commit 0240d94c36
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jan 22 16:17:10 2014 +0000
Remove windows thread implementation in favour of pthreads
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In some places where virDomainObjListForEach() is called the
passed callback calls virDomainObjListRemoveLocked(). Well, this
is unsafe, because the former only grabs a read lock but the
latter modifies the list.
I've identified the following unsafe calls:
- qemuProcessReconnectAll()
- libxlReconnectDomains()
The rest seem to be safe.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All code using LOCALSTATEDIR "/run" is updated to use RUNSTATEDIR
instead. The exception is the remote driver client which still
uses LOCALSTATEDIR "/run". The client needs to connect to remote
machines which may not be using /run, so /var/run is more portable
due to the /var/run -> /run symlink.
Some duplicate paths in the apparmor code are also purged.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Creating various directories using $(runstatedir) instead of
$(localstatedir)/run.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Store the namespace URI as const char*, instead of in a function.
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that virDomainXMLNamespace matches virXMLNamespace,
we no longer need to keep both around.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Neither the xmlDocPtr nor the root xmlNode (also passed
in the XPathContext) are interesting to the callees.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The virtlxcd daemon will be responsible for providing the lxc API
driver functionality. The lxc driver is still loaded by the main
libvirtd daemon at this stage, so virtlxcd must not be running at
the same time.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When running in libvirtd, we are happy for any of the drivers to simply
skip their initialization in virStateInitialize, as other drivers are
still potentially useful.
When running in per-driver daemons though, we want the daemon to abort
startup if the driver cannot initialize itself, as the daemon will be
useless without it.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using @VARNAME@ is a normal style of automake, so lets match that.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of each subdir containing its own custom rule for checking the
augeas tests, use common rule for all.
The new rule searches both src + build dirs for include files, since
some augeas files will be auto-generated very shortly.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current make rules are inconsistent about which directory the
augeas test files are created in. Put them all in the same dir as
their source.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We already have a variable that lists all augeas test files, so we can
add everything to CLEANFILES at once.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The augeas-gentest.pl program merges a config file into a augeas
file, saving the output to a new file. It is going to be useful
to further process the output file, and it would be easier if this can
be done with a pipeline, so change augeas-gentest.pl to write to stdout
instead of a file.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.
QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that 100% of libvirt code is forbidden in a SUID environment,
we no longer need to worry about whether env variables are
trustworthy or not. The virt-login-shell setuid program, which
does not link to any libvirt code, will purge all environment
variables, except $TERM, before invoking the virt-login-shell-helper
program which uses libvirt.
Thus we only need one API for env passthrough in virCommand.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some VM configurations may result in a large number of threads created by
the associated qemu process which can exceed the system default limit. The
maximum number of threads allowed per process is controlled by the pids
cgroup controller and is set to 16k when creating VMs with systemd's
machined service. The maximum number of threads per process is recorded
in the pids.max file under the machine's pids controller cgroup hierarchy,
e.g.
$cgrp-mnt/pids/machine.slice/machine-qemu\\x2d1\\x2dtest.scope/pids.max
Maximum threads per process is controlled with the TasksMax property of
the systemd scope for the machine. This patch adds an option to qemu.conf
which can be used to override the maximum number of threads allowed per
qemu process. If the value of option is greater than zero, it will be set
in the TasksMax property of the machine's scope after creating the machine.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When the drivers acquire their pidfile lock we don't want to wait if the
lock is already held. We need the driver to immediately report error,
causing the daemon to exit.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/lxc/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/lxc/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirtd has long had integration with avahi for advertising libvirtd
using mDNS when TCP/TLS listening is enabled. For a long time the
virt-manager application had support for auto-detecting libvirtds
on the local network using mDNS, but this was removed last year
commit fc8f8d5d7e3ba80a0771df19cf20e84a05ed2422
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 6 20:55:31 2018 -0400
connect: Drop avahi support
Libvirtd can advertise itself over avahi. The feature is disabled by
default though and in practice I hear of no one actually using it
and frankly I don't think it's all that useful
The 'Open Connection' wizard has a disproportionate amount of code
devoted to this feature, but I don't think it's useful or worth
maintaining, so let's drop it
I've never heard of any other applications having support for using
mDNS to detect libvirtd instances. Though it is theoretically possible
something exists out there, it is clearly going to be a niche use case
in the virt ecosystem as a whole.
By removing avahi integration we can cut down the dependency chain for
the basic libvirtd install and reduce our code maint burden.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The various steps involved in reconnecting to a domain may cause updates
to the virDomainObj struct that need to be reflected in the saved status
file.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When starting up it is important to notify the network driver of any
NICs which are used by running guests so that it can account for any
resources they are using.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This function is calling public API virNetworkLookupByName()
which resets the error. Therefore, if
virDomainNetReleaseActualDevice() is used in cleanup path it
actually resets the original error that got us jump into
'cleanup' label.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our coding style specifies that only negative values are considered as
error. Check for return value of virDomainDiskInsert() properly,
following the style. Not that the function can now return anything other
than 0 or -1, but it just triggers my OCD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The call to resolve the actual network type will turn any NICs with
type=network into one of the other types. Thus there should be no need
to handle type=network in later switch() statements jumping off the
actual type.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The APIs for allocating/notifying/removing network ports just take
an internal domain interface struct right now. As a step towards
turning these into public facing APIs, add a virNetworkPtr argument
to all of them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The port allocation APIs are currently called unconditionally for all
types of NIC, but (mostly) only do anything for NICs with type=network.
The exception is the port allocate API which does some validation even
for NICs with type!=network. Relying on this validation is flawed,
however, since the network driver may not even be installed. IOW virt
drivers must not delegate validation to the network driver for NICs
with type != network.
This change allows us to report errors when the virtual network driver
is not registered.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Vim has trouble figuring out the filetype automatically because
the name doesn't follow existing conventions; annotations like
the ones we already have in Makefile.ci help it out.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This reverts commit a5e1602090.
Getting rid of unistd.h from our headers will require more work than
just fixing the broken mingw build. Revert it until I have a more
complete proposal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
util/virutil.h bogously included unistd.h. Drop it and replace it by
including it directly where needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'viralloc.h' does not provide any type or macro which would be necessary
in headers. Prevent leakage of the inclusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>