We need the restored job even in case the migration already finished
even though we will stop it just a few lines below as the functions we
call in between require an existing migration job.
This fixes a crash on reconnect when post-copy migration finished while
the daemon was not running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
On 32-bit arches, it's possible not only to request
-D_FILE_OFFSET_BITS=64 (which is always done with meson) but also
-D_TIME_BITS=64. With glibc, both of these affect what variant of
stat() or lstat() is called. With 64 bit time it's:
__stat64_time64() or __lstat64_time64(), respectively.
Fortunately, no other variant (__xstat(), __xstat64()) has
_time64 alternative and thus does not need similar treatment.
Similarly, musl is not affected by this.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/404
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Nothing in virnettlscontexttest nor virnettlssessiontest calls
any of random number generator functions overridden
virrandommock. GnuTLS handles RNG within itself.
Therefore, there's no need to preload the mock.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These format are left unchanged when convert 'unsigned long' to
'unsigned long long', which caused compile warning.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Just adds a tool to the applications list. This tool helps managing
multiple VMs at once using the python binding.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cédric Bosdonnat <cbosdonnat@suse.com>
If the running firewalld doesn't support getPolicies() then we fallback
to the "libvirt" zone. Throwing an error log is excessive since we
gracefully fallback.
Avoids these logs:
error : virGDBusCallMethod:242 : error from service: \
GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod
Fixes: ab56f84976 ("util: add virFirewallDGetPolicies()")
Signed-off-by: Eric Garver <eric@garver.life>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Register virDomainMemoryDefFree() to do the cleanup.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
This is new allocator for virDomainMemoryDef struct which also
sets some default values: @model and @targetNode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The idea here is that virVMXConfigScanResultsCollector() sets the
networks_max_index to the highest ethernet index seen. Well, the
struct member is signed int, we parse just seen index into uint
and then typecast to compare the two. This is not necessary,
because the maximum number of NICs a vSphere domain can have is
(<drumrolll/>): ten [1]. This will fit into signed int easily
anywhere.
1: https://configmax.esp.vmware.com/guest?vmwareproduct=vSphere&release=vSphere%208.0&categories=1-0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Now that we have STRCASESKIP() there's no need to open code it.
Convert virVMXConfigScanResultsCollector() so that it uses this
new macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There is so far one case where STRCASEPREFIX(a, b) && a +
strlen(b) combo is used (in virVMXConfigScanResultsCollector()),
but there will be more. Do what we do usually: introduce a macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
We document use of our STR*() macros, but somehow missed
STRCASEPREFIX() and STRSKIP().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
We require a space after a comma and even document this in our
coding style document. However, our own rule is broken in the
very same document when listing string comparison macros.
Separate macro arguments properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Avocado 99.0 causes the TCK test suite to fail with the nwfilter tests
(which is another Bash framework underneath). Until the culprit is
identified and fixed in Avocado, let's lock the version to 98.0 which
worked with the test suite just fine.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Despite efforts to make the virt-qemu-sev-validate tool friendly, it is
a certainty that almost everyone who tries it will hit false negative
results, getting a failure despite the VM being trustworthy.
Diagnosing these problems is no easy matter, especially for those not
familiar with SEV/SEV-ES in general. This extra docs text attempts to
set out a checklist of items to look at to identify what went wrong.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In general we expect to be able to construct a SEV-ES VMSA
blob from knowledge about the AMD achitectural CPU register
defaults, KVM setup and QEMU setup. If any of this unexpectedly
changes, figuring out what's wrong could be horrible. This
systemtap script demonstrates how to capture the real VMSA
that is used for a SEV-ES as it is booted. The captured data
can be fed into the 'sevctl vmsa show' command in order to
produce formatted info with named registers, allowing a
'diff' to be performed.
This script will need updating for any kernel version that is
not 6.0, to set the correct line numbers.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Expand the SEV guest kbase guide with information about how to configure
a SEV/SEV-ES guest when attestation is required, and mention the use of
virt-qemu-sev-validate as a way to confirm it.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is possible to build OVMF for SEV with an embedded Grub that can
fetch LUKS disk secrets. This adds support for injecting secrets in
the required format.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When validating a SEV-ES guest, we need to know the CPU count and VMSA
state. We can get the CPU count directly from libvirt's guest info. The
VMSA state can be constructed automatically if we query the CPU SKU from
host capabilities XML. Neither of these is secure, however, so this
behaviour is restricted.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The VMSA files contain the expected CPU register state for the VM. Their
content varies based on a few pieces of the stack
- AMD CPU architectural initial state
- KVM hypervisor VM CPU initialization
- QEMU userspace VM CPU initialization
- AMD CPU SKU (family/model/stepping)
The first three pieces of information we can obtain through code
inspection. The last piece of information we can take on the command
line. This allows a user to validate a SEV-ES guest merely by providing
the CPU SKU information, using --cpu-family, --cpu-model,
--cpu-stepping. This avoids the need to obtain or construct VMSA files
directly.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the SEV-ES policy the VMSA state of each vCPU must be included in
the measured data. The VMSA state can be generated using the 'sevctl'
tool, by telling it a QEMU VMSA is required, and passing the hypevisor's
CPU SKU (family, model, stepping).
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When connected to libvirt we can validate that the guest configuration
has the kernel hashes property enabled, otherwise including the kernel
GUID table in our expected measurements is not likely to match the
actual measurement.
When running locally we can also automatically detect the kernel/initrd
paths, along with the cmdline string from the XML.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When doing direct kernel boot we need to include the kernel, initrd and
cmdline in the measurement.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Accept information about a connection to libvirt and a guest on the
command line. Talk to libvirt to obtain the running guest state and
automatically detect as much configuration as possible.
It will refuse to use a libvirt connection that is thought to be local
to the current machine, as running this tool on the hypervisor itself is
not considered secure. This can be overridden using the --insecure flag.
When querying the guest, it will also analyse the XML configuration in
an attempt to detect any options that are liable to be mistakes. For
example the NVRAM being measured should not have a persistent varstore.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virt-qemu-sev-validate program will compare a reported SEV/SEV-ES
domain launch measurement, to a computed launch measurement. This
determines whether the domain has been tampered with during launch.
This initial implementation requires all inputs to be provided
explicitly, and as such can run completely offline, without any
connection to libvirt.
The tool is placed in the libvirt-client-qemu sub-RPM since it is
specific to the QEMU driver.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This function is fine to use in other languages
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When generating memory for main guest memory memory-backend-*
might be used. This means, we may need to generate thread-context
objects too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When generating memory for memory devices memory-backend-* might
be used. This means, we may need to generate thread-context
objects too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When generating memory for guest NUMA memory-backend-* might be
used. This means, we may need to generate thread-context objects
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
While technically thread-context objects can be reused, we only
use them (well, will use them) to pin memory allocation threads.
Therefore, once we connect to QEMU monitor, all memory (with
prealloc=yes) was allocated and thus these objects are no longer
needed and can be removed. For on demand allocation the TC object
is left behind.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The aim of thread-context object is to set affinity on threads
that allocate memory for a memory-backend-* object. For instance:
-object '{"qom-type":"thread-context","id":"tc-ram-node0","node-affinity":[3]}' \
-object '{"qom-type":"memory-backend-memfd","id":"ram-node0","hugetlb":true,\
"hugetlbsize":2097152,"share":true,"prealloc":true,"prealloc-threads":8,\
"size":15032385536,"host-nodes":[3],"policy":"preferred",\
"prealloc-context":"tc-ram-node0"}' \
allocates 14GiB worth of memory, backed by 2MiB hugepages from
host NUMA node 3, using 8 threads. If it weren't for
thread-context these threads wouldn't have any affinity and thus
theoretically could be scheduled to run on CPUs of different NUMA
node (which is what I saw occasionally).
Therefore, whenever we are pinning memory (IOW setting host-nodes
attribute), we can generate thread-context object with the same
affinity.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In its commit v7.1.0-1429-g7208429223 QEMU gained new object
thread-context, which allows running specialized tasks with
affinity set to a given subset of host CPUs/NUMA nodes. Even
though only memory allocation task accepts this new object, it's
exactly what we aim to implement in libvirt. Therefore, introduce
a new capability to track whether QEMU is capable of this object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
On aarch64 the 'id' file is not present for CPU cache information in
sysfs. This causes the local stateful hypervisor drivers to fail to
initialize capabilities:
virStateInitialize:657 : Initialisation of cloud-hypervisor state driver failed: no error
The 'no error' is because the 'virFileReadValueNNN' methods return
ret==-2, with no error raised, when the requeted file does not exist.
None of the callers were checking for this scenario when populating
capabilities. The most graceful way to handle this is to skip the
cache bank in question. This fixes failure to launch libvirt drivers
on certain aarch64 hardware.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/389
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This lets us simplify the cleanup paths when populating the host cache
bank information in capabilities XML.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Inside virt-qemu-run, just like in virsh for example, there is no
identity set in the current thread, so we should not try to set it,
otherwise things like connecting to other drivers might fail and on
top of that there is no error set so the user can't even see what's
wrong.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2000075
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is already nonfallible, so just change the return type to void.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Two notable changes:
* the macOS platform has switched from x86_64 to aarch64
* if a new pipeline starts before a previous one finishes,
jobs marked 'interruptible: true' will be auto-cancelled
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In one of recent commits an error message was introduced. In this
message a variable of type ssize_t is being printed out, but the
corresponding format directive is %ld instead of %zd which breaks
on 32bits systems. Switch to proper format.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Downstream CI recently encountered failures of libxlxml2domconfigtest when
building libvirt packages against Xen 4.17 rc3 packages. The test fails on
vnuma_hvm config, where suddently the actual json produced by
libxl_domain_config_to_json() contains a 'pnode' entry in the 'vnuma_nodes'
list, which is absent in the expected json. It appears the test has thus far
passed by luck. E.g. I was able to make the test pass in the failing
environment by changing the meson buildtype from debugoptimized to debug.
When a VM config contains vnuma settings, libxlMakeVnumaList() checks if the
number of requested vnuma nodes exceeds the number of physical nodes. The
number of physical nodes is retrieved with libxl_get_physinfo(), which can
return wildly different results in the context of unit tests. This change
mocks libxl_get_physinfo() to return consistent results. All fields of the
libxl_physinfo struct are set to 0 except nr_nodes, which is set to 6 to
ensure the vnuma_hvm configuration is properly tested.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to the result parsing from xml, add the argument of
SGX EPC memory backend into QEMU command line.
$ qemu-system-x86_64 \
...... \
-object '{"qom-type":"memory-backend-epc","id":"memepc0","prealloc":true,"size":67108864,"host-nodes":[0,1],"policy":"bind"}' \
-object '{"qom-type":"memory-backend-epc","id":"memepc1","prealloc":true,"size":16777216,"host-nodes":[2,3],"policy":"bind"}' \
-machine sgx-epc.0.memdev=memepc0,sgx-epc.0.node=0,sgx-epc.1.memdev=memepc1,sgx-epc.1.node=1
Signed-off-by: Lin Yang <lin.a.yang@intel.com>
Signed-off-by: Haibin Huang <haibin.huang@intel.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As advertised in previous commits, QEMU needs to access
/dev/sgx_vepc and /dev/sgx_provision files when SGX memory
backend is configured. And if it weren't for QEMU's namespaces,
we wouldn't dare to relabel them, because they are system wide
files. But if namespaces are used, then we can set label on
domain's private copies, just like we do for /dev/sev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Haibin Huang <haibin.huang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is similar to the previous commit. SGX memory backend needs
to access /dev/sgx_vepc and /dev/sgx_provision. Create these
nodes in domain's private /dev when required by domain's config.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Haibin Huang <haibin.huang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SGX memory backend needs to access /dev/sgx_vepc (which allows
userspace to allocate "raw" EPC without an associated enclave)
and /dev/sgx_provision (which allows creating provisioning
enclaves). Allow these two devices in CGroups if a domain is
configured so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Haibin Huang <haibin.huang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend hypervisor capabilities to include sgx feature. When available,
the hypervisor supports launching an VM with SGX on Intel platfrom.
The SGX feature tag privides additional details like section size and
sgx1 or sgx2.
Signed-off-by: Haibin Huang <haibin.huang@intel.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
