virHashTableForEach unhelpfully has payload/key args in
its callback reversed compared to g_hash_table_foreach.
When converting from one to the other the semantics
change but you don't get a compile error
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A wrong reordering caused "priv" to be derefenced before the NULL-check
in esxStreamSend and esxStreamRecvFlags.
Fixes: 12e19f172d
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This stage will download build artifacts from both the libvirt and
libvirt-perl (multi-project CI) builds, install all them on the custom
runners and configures libvirt debug logging on the runners prior to
executing the actual test suite. In case of a failure, libvirt and
Avocado logs will be saved and published as pipeline artifacts.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're already building libvirt in the containers already, if we publish
the build in form of, say, RPMs, later stages of the pipeline can
consume the RPMs instead of re-building libvirt from scratch.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes it possible to reduce the number of cases we have to
consider, because 'sles' declares itself to be like 'suse' and
both 'rhel' and 'centos' declare themselves to be like 'fedora'.
We have to move the check for Ubuntu before the one for Debian,
however, because 'ubuntu' declares itself to be like 'debian'
and it would end up with the wrong defaults otherwise.
Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The documentation included in these manual pages is mostly useful
to users of the 'send-key' virsh command, and the virsh manual
page refers to them, so it makes more sense to install them along
with virsh instead of libvirtd.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
I introduced support for these vim plugins several years ago
but have since moved away from them. These days developers
are likely better served by lsp-based tooling, which doesn't
require additional per-project configuration.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The files marked as export-ignore here are not going to be
included in the tarball produced by 'meson dist' when using
meson >= 0.60.
Older versions of meson excluded a small subset of these files
automatically, but since we have more control now we can be
more aggressive and leave out anything that doesn't make sense
in a release tarball.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current use of an array for nwfilter objects requires
the caller to iterate over all elements to find a filter,
and also requires locking each filter.
Switching to a pair of hash tables enables O(1) lookups
both by name and uuid, with no locking required.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The comment against the 'updateMutex' refers to a problem with
lock ordering when looking up filters in the virNWFilterObjList
which uses an array. That problem does indeed exist.
Unfortunately it claims that switching to a hash table would
solve the lock ordering problems during instantiation. That
is not correct because there is a second lock ordering
problem related to how we traverse related filters when
instantiating filters. Consider a set of filters:
Filter A:
Reference Filter C
Reference Filter D
Filter B:
Reference Filter D
Reference Filter C
In one example, we lock A, C, D, in the other example
we lock A, D, C.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNWFilterObjListNumOfNWFilters method iterates over the
driver->nwfilters, accessing virNWFilterObj instances. As such
it needs to be protected against concurrent modification of
the driver->nwfilters object.
This API allows unprivileged users to connect, so users with
read-only access to libvirt can cause a denial of service
crash if they are able to race with a call of virNWFilterUndefine.
Since network filters are usually statically defined, this is
considered a low severity problem.
This is assigned CVE-2022-0897.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When nodedev objects are added and removed if possible check if mdev-types is
supported by the object and trigger a mdev device definition update to correct
the associated parent nodedevs.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The parent of the mdev definition can change due to the existance of the
parent device. The parents existance can e.g. depend on the device
driver load state.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The function will be reused in the nodedev drivers udev handling.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The virNetDevGenerateName() function uses a global array of
virNetDevGenName structs to find next unused name for network
device. This obviously needs some locking and in fact each member
of the array has its own lock. However, these members are not
virObjects, they are just plain structs, therefore
VIR_WITH_MUTEX_LOCK_GUARD() must be used instead of
VIR_WITH_OBJECT_LOCK_GUARD() to lock individual mutexes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This allows init job even if cb structure is not set. This patch
also includes slight rewriting of the function to make it look
cleaner when freeing resources, by allocating privateData at the
end.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We should allow resetting / freeing / restoring / parsing /
formatting qemuDomainJobObj even if 'cb' attribute is not set.
This is theoretical for now, but the attribute must not be always
set in the future. It is sufficient to check if 'cb' exists
before dereferencing it.
This commit partially reverts af16e754cd.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On domain startup a couple of devices are allowed in the devices
controller no matter the domain configuration. The aim is to
allow devices crucial for QEMU or one of its libraries, or user
is passing through a device (e.g. through additional cmd line
arguments) and wants QEMU to access it.
However, during unplug it may happen that a device is configured
to use one of such devices and since we deny /dev nodes on
hotplug we would deny such device too. For example,
/dev/urandom belongs onto the list of implicit devices and users
can hotplug and hotunplug an RNG device with /dev/urandom as
backend.
The fix is fortunately simple - just consult the list of implicit
devices before removing the device from the namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In all cases virCgroupDenyDevicePath() is followed by
virDomainAuditCgroupPath(). Might as well pack that into one
function and call it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In all cases virCgroupAllowDevicePath() is followed by
virDomainAuditCgroupPath(). Might as well pack that into one
function and call it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When allowing or denying RNG device in CGroups there's a special
check if the backend device exists (errno == ENOENT) in which
case success is returned to caller. This is in contrast with the
rest of the functions and in fact wrong too - if the backend
device doesn't exist then QEMU will fail opening it. Might as
well signal error here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
These functions are only ever called in a single threaded
environment and the mutex would not have prevented concurrent
access anyway.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When creating /dev nodes in a QEMU domain's namespace the first
thing we simply do is unlink() the path and create it again. This
aims to solve the case when a file changed type/major/minor in
the host and thus we need to reflect this in the guest's
namespace. Fair enough, except we can be a bit more clever about
it: firstly check whether the path doesn't already exist or isn't
already of the correct type/major/minor and do the
unlink+creation only if needed.
Currently, this is implemented only for symlinks and
block/character devices. For regular files/directories (which are
less common) this might be implemented one day, but not today.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When building namespace for a domain there are couple of devices
that are created independent of domain config (see
qemuDomainPopulateDevices()). The idea behind is that these
devices are crucial for QEMU or one of its libraries, or user is
passing through a device and wants us to create it in the
namespace too. That's the reason that these devices are allowed
in the devices CGroup controller as well.
However, during unplug it may happen that a device is configured
to use one of such devices and since we remove /dev nodes on
hotplug we would remove such device too. For example,
/dev/urandom belongs onto the list of implicit devices and users
can hotplug and hotunplug an RNG device with /dev/urandom as
backend.
The fix is fortunately simple - just consult the list of implicit
devices before removing the device from the namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have a function that generates string list for given
enum, let's use that instead of open coding it.
Note, after this there are still some 'candidates' left (e.g,
virshNetworkEventNameCompleter(), or
virshNetworkUpdateCommandCompleter()). These are not converted
because either they don't have a convenient int2str function or
they don't start from the very beginning of the enum.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We have plenty of completers which iterate over all values of
given enum and do nothing more than translate every member into
string (using corresponding virXXXTypeToString()).
Introduce a convenience function so that callers can pass just
VIR_XXX_LAST and virXXXTypeToString and the rest is taken care
of.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A completer must return a NULL terminated list of strings, which
means that when dealing with enums, it has to allocate one
pointer more than the value of VIR_XXX_LAST. But this is not
honoured in virshDomainInterfaceSourceModeCompleter() leading to
out of bounds read.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Autofree the temporary string and shuffle around the success path to
avoid the 'cleanup' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The NBD connection for non-shared storage migration can have the same
issue regarding TLS certificate name match as the migration connection
itself.
Propagate the configured name also for the NBD connections.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1901394
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the hostname of the NBD server doesn't match the hostname
in the TLS certificate the new attribute 'tlsHostname' can be used to
override it.
Add the XML infrastructure and tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The value will be used to override the hostname used for validation of
TLS certificates.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We do support non-shared storage migration with TLS now. Fix the comment
claiming otherwise.
Fixes: a8dc146a4d
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Detect that qemu can override TLS hostname setting for NBD clients.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to commit v6.2.0-2296-g9f0369efb0
Notable changes:
- 'tls-hostname' field for NBD client to override local hostname
- machine types 'pc-i440fx-1.7' and older are now deprecated
- 'snapshot-access' block driver added
- The 'protocol' field of 'set_password' and 'expire_password'
parameter is now an enum instead of a pure string allowing 'vnc' and
'spice' as value and the arguments are also covered by the schema.
- 'copy-before-write' block driver now has a 'bitmap' property
- 'query-migrate' now reports 'precopy-bytes', 'downtime-bytes',
'postcopy-bytes' for 'ram' and 'disk' statistics
- RTC_CHANGE event now has a 'qom-path' property to identify the RTC
- 'umip' cpu feature is now migratable
- SGX property 'section-size' reinstated after regression
Changes in build setting:
- fuse block export support now enabled
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
