Prior patch removed the need for the virConnectPtr in the unplug
detach host path which caused ripple effect to remove in multiple
callers. The previous patch just left things as ATTRIBUTE_UNUSED -
this patch will remove the variable.
https://bugzilla.redhat.com/show_bug.cgi?id=1141732
Introduced by commit id '8f76ad99' the logic to detach a scsi_host
device (SCSI or iSCSI) fails when attempting to remove the 'drive'
because as I found in my investigation - the DelDevice takes care of
that for us.
The investigation turned up commits to adjust the logic for the
qemuMonitorDelDevice and qemuMonitorDriveDel processing for interfaces
(commit id '81f76598'), disk bus=VIRTIO,SCSI,USB (commit id '0635785b'),
and chr devices (commit id '55b21f9b'), but nothing with the host devices.
This commit uses the model for the previous set of changes and applies
it to the hostdev path. The call to qemuDomainDetachHostSCSIDevice will
return to qemuDomainDetachThisHostDevice handling either the audit of
the failure or the wait for the removal and then call into
qemuDomainRemoveHostDevice for the event, removal from the domain hostdev
list, and audit of the removal similar to other paths.
NOTE: For now the 'conn' param to +qemuDomainDetachHostSCSIDevice is left
as ATTRIBUTE_UNUSED. Removing requires a cascade of other changes to be
left for a future patch.
Since commit 8eb55d782a2b9afacc7938694891cc6fad7b42a5 libxml2 removes
two slashes from the URI when there is no server part. This is fixed
with beb7281055dbf0ed4d041022a67c6c5cfd126f25, but only if the calling
application calls xmlSaveUri() on URI that xmlURIParse() parsed. And
that is not the case in virURIFormat(). virURIFormat() accepts
virURIPtr that can be created without parsing it and we do that when we
format network storage paths for gluster for example. Even though
virStorageSourceParseBackingURI() uses virURIParse(), it throws that data
structure right away.
Since we want to format URIs as URIs and not absolute URIs or opaque
URIs (see RFC 3986), we can specify that with a special hack thanks to
commit beb7281055dbf0ed4d041022a67c6c5cfd126f25, by setting port to -1.
This fixes qemuxml2argvtest test where the disk-drive-network-gluster
case was failing.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since 87dea4fcff vboxGetDrivers() is not
used for getting the vbox network driver. The only call the code does
is using NULL as the @networkDriver_ret param , but the code still used
vbox[0-9][0-9]NetworkDriver that didn't exist anymore.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch implements support for the ivshmem device in QEMU.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Ivshmem is supported by QEMU since 0.13 release.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds parsing/formatting code as well as documentation for
shared memory devices. This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.
In the devices section in the domain XML users may specify:
- For shmem device using a server:
<shmem name='shmem0'>
<server path='/tmp/socket-ivshmem0'/>
<size unit='M'>32</size>
<msi vectors='32' ioeventfd='on'/>
</shmem>
- For ivshmem device not using an ivshmem server:
<shmem name='shmem1'>
<size unit='M'>32</size>
</shmem>
Most of the configuration is made optional so it also allows
specifications like:
<shmem name='shmem1/>
<shmem name='shmem2'>
<server/>
</shmem>
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Aeons ago (commit 34dcbbb4, v0.8.2), we added a new libvirt event
(VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON) in order to tell the user WHY
the guest halted. This is because at least VDSM wants to react
differently to ENOSPC events (resize the lvm partition to be larger,
and resume the guest as if nothing had happened) from all other events
(I/O is hosed, throw up our hands and flag things as broken). At the
time this was done, downstream RHEL qemu added a vendor extension
'__com.redhat_reason', which would be exactly one of these strings:
"enospc", "eperm", "eio", and "eother". In our stupidity, we exposed
those exact strings to clients, rather than an enum, and we also
return "" if we did not have access to a reason (which was the case
for upstream qemu).
Fast forward to now: upstream qemu commit c7c2ff0c (will be qemu 2.2)
FINALLY adds a 'nospace' boolean, after discussion with multiple
projects determined that VDSM really doesn't care about distinction
between any other error types. So this patch converts 'nospace' into
the string "enospc" for compatibility with RHEL clients that were
already used to the downstream extension, while leaving the reason
blank for all other cases (no change from the status quo).
See also https://bugzilla.redhat.com/show_bug.cgi?id=1119784
* src/qemu/qemu_monitor_json.c (qewmuMonitorJSONHandleIOError):
Parse reason field from modern qemu.
* include/libvirt/libvirt.h.in
(virConnectDomainEventIOErrorReasonCallback): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now when building the qemu command line, we try to do various
unconditional validations of the guest CPU against the host CPU. However
this checks are overly applied. The only time we should use the checks
are:
- The user requests host-model/host-passthrough, or
- When KVM is requsted. CPU features requested in TCG mode are always
emulated by qemu and are independent of the host CPU, so no host CPU
checks should be performed.
Right now if trying to specify a CPU for arm on an x86 host, it attempts
to do non-sensical validation and falls over.
Switch all the test cases that were intending to test CPU validation to
use KVM, so they continue to test the intended code.
Amend some aarch64 XML tests with a CPU model, to ensure things work
correctly.
When building libvirt from source with netcf-devel installed, the
configure script reports error "libnl-devel >=3.0 is required for
macvtap support", while actually libnl3-devel is required.
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
check domain's status before call virQEMUCapsGet to report a accurate
error when domain is shut off
Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=1147847
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
After 87dea4fcf one can observe a build failure:
./autogen.sh --system --without-driver-modules && make
CCLD libvirtd
../src/.libs/libvirt_driver_vbox.a(libvirt_driver_vbox_impl_la-vbox_driver.o):
In function `vboxNetworkRegister':
/home/jtomko/work/libvirt/libvirt.git/src/vbox/vbox_driver.c:168: undefined
reference to `vboxGetNetworkDriver'
collect2: error: ld returned 1 exit status
make[3]: *** [libvirtd] Error 1
The problem is that when building without driver modules the VBOX
network driver is not linked into the the VBOX driver.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch seperate the domain driver and the network driver.
libvirt_driver_vbox_impl.la has been linked in the network driver.
So that the version specified codes in vbox_V*.c would only be
compiled once.
The vboxGetNetworkDriver provides a simple interface to get vbox
network driver.
This patch rewrites two public APIs. They are vboxNetworkUndefine
and vboxNetworkDestroy. They use the same core function
vboxNetworkUndefineDestroy. I merged it in one patch.
This patch actually contains two public API, virNetworkDefineXML
and virNetworkCreateXML. They use the same core function
vboxNetworkDefineCreateXML. So I merged it together.
The patch dbb4cbf532 by Michal has splited the vbox driver into
three parties. This modification brings a more suitable interface
to the previous patch.
The new function vboxGetDriver is introduced to get the
corresponding vbox domain driver directly thought the vbox version.
Functions like vboxGetNetworkDriver and vboxGetStorageDriver
will be introduced after rewriting it's drivers.
This patch, by the way, fixed the align problem for vbox in
Makefile.am
Up until now, we set memballoon period in monitor successfully, however
we did not update domain definition structure, thus dumpxml was omitting
period attribute in memballoon element
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140960
When trying to update bandwidth limits on a running domain, limits get
updated in our internal structures, however XML parser reads
bandwidth limits from network 'actual' definition. Committing this patch
it is now available to update bandwidth 'actual' definition as well,
thus updating domain runtime XML.
A cygwin build of 1.2.9 fails with:
util/virprocess.c:87:27: fatal error: sys/syscall.h: No such file or directory
# include <sys/syscall.h>
But in reality, the ONLY user of setns() is lxc, which is Linux-only.
It's easiest to just limit the setns workarounds to Linux.
* src/util/virprocess.c (setns): Limit definition to Linux.
Signed-off-by: Eric Blake <eblake@redhat.com>
If we don't properly clean up all processes in the
machine-<vmname>.scope systemd won't remove the cgroup and subsequent vm
starts fail with
'CreateMachine: File exists'
Additional processes can e.g. be added via
echo $PID > /sys/fs/cgroup/systemd/machine.slice/machine-${VMNAME}.scope/tasks
but there are other cases like
http://bugs.debian.org/761521
Invoke TerminateMachine to be on the safe side since systemd tracks the
cgroup anyway. This is a noop if all processes have terminated already.
Management software wants to be able to allocate disk space on demand.
To support this they need keep track of the space occupation of the
block device. This information is reported by qemu as part of block
stats.
This patch extend the block information in the bulk stats with the
allocation information.
To keep the same behaviour a helper is extracted from
qemuMonitorJSONGetBlockExtent in order to get per-device allocation
information.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
While our code gathers block stats via "query-blockstats" some
information need to be gathered via "query-block". Add a helper function
that will update the blockstats structure if requested.
If you use public api virConnectListAllDomains() with second parameter
set to NULL to get only the number of domains you will lock out all
other operations with domains.
Introduced by commit 2c680804.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This removes the artificial and unnecessary restriction that
virDomainSetMaxDowntime() only be called while a migration is in
progress.
https://bugzilla.redhat.com/show_bug.cgi?id=1146618
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The current block stats code matched up the disk name with the actual
stats by the order in the data returned from qemu. This unfortunately
isn't right as qemu may return the disks in any order. Fix this by
returning a hash of stats and index them by the disk alias.
Commit de0aeaf filtered them out from the host-model features,
to allow host-model to be migratable by default.
Even though they are not passed to QEMU for host-passthrough,
(and not enabled by default) filter them out too
so the user does not think the domain has them.
https://bugzilla.redhat.com/show_bug.cgi?id=1147584
Commit fba6bc4 introduced the non-migratable invtsc feature,
breaking save/migration with host-model and host-passthrough.
On hosts with this feature present it was automatically included
in the CPU definition, regardless of QEMU support.
Commit de0aeaf stopped including it by default for host-model,
but failed to fix host-passthrough.
This commit ignores checking of CPU features with host-passthrough,
since we don't pass them to QEMU (only -cpu host is passed),
allowing domains using host-passthrough that were saved with
the broken version of libvirtd to be restored.
https://bugzilla.redhat.com/show_bug.cgi?id=1147584
