If virCgroupEnableMissingControllers() fails it could have already
created some directories, we should clean it up as well.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There seems to be no need to add the ignore_value wrapper or
caste with (void) to the unlink() calls, so let's just remove
them. I assume at one point in time Coverity complained. So,
let's just be consistent - those that care to check the return
status can and those that don't can just have the naked unlink.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This patch is introducing cache monitor(CMT) to cache and
memory bandwidth monitor(MBM) for monitoring CPU memory
bandwidth.
The host capability of the two monitors is also introduced
in this patch.
For CMT, the host capability is shown like:
<host>
...
<cache>
<bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'>
<control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/>
</bank>
<monitor level='3' 'reuseThreshold'='270336' maxMonitors='176'>
<feature name='llc_occupancy'/>
</monitor>
</cache>
...
</host>
For MBM, the capability is shown like this:
<host>
...
<memory_bandwidth>
<node id='1' cpus='6-11'>
<control granularity='10' min ='10' maxAllocs='4'/>
</node>
<monitor maxMonitors='176'>
<feature name='mbm_total_bytes'/>
<feature name='mbm_local_bytes'/>
</monitor>
</memory_bandwidth>
...
</host>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch introduces the resource monitor and creates the interface
for getting host capability of resource monitor from the system resource
control file system.
The resource monitor takes the role of RDT monitoring group and could be
used to monitor the resource consumption information, such as the last
level cache occupancy and the utilization of memory bandwidth.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
So far the virLockSpaceAcquireResource() locks the first byte in
the underlying file. But caller might want to lock other range.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Functions that deal with virPCIDeviceAddress exclusively
belong to util/virpci.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
commit b00c9c39 removed the label end_of_netlink_messages and 'return
table' statement, It causes the function virArpTableGet doesn't return
a proper virArpTable pointer.
How to reproduce:
# virsh domiflist sles12sp3
Interface Type Source Model MAC
-------------------------------------------------------
vnet0 network default virtio 52:54:00💿02:e6
# virsh domifaddr sles12sp3 --source arp
error: Failed to query for interfaces addresses
error: An error occurred, but the cause is unknown
It seems that the "if (nh->nlmsg_type == NLMSG_DONE)" statement won't be
meted. So this patch adds 'return table' when the iterations of nlmsghdr
for loop is over.
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of duplicating the code from virGet{User,Group}IDByName(), which are
static anyway, extend those functions to accept NULL pointers for the result and
a boolean for controlling the error reporting.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch simplifies virNetDevBridgeCreate and virNetDevMacVLanCreate
functions by making use of the virNetlinkNewLink helper.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This patch adds wrapper macros around nla_nest_[start|end] and nla_put,
thus getting rid of some redundancy and making virNetlinkNewLink more
readable.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch introduces virNetlinkNewLink helper which wraps the common
libnl/netlink code to create a new link.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
nlmsg_append from the libnl library provides exactly the same
functionality, so we should rely on that instead. This also allows us to
drop the aforementioned function completely.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
@resp is allocated by virNetlinkCommand and the caller is responsible
for freeing the buffer. Since we already converted this module to use
VIR_AUTO{FREE,PTR} macros, let's resolve the problem by using them.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There's a single user for it which takes an existing
virPCIDeviceAddress, passes its various bits to the
function which in turn constructs a virPCIDevice and
then copies the string representation for the caller
to use: we can use virPCIDeviceAddressAsString()
instead and avoid creating the virPCIDevice in the
first place. Since the function ends up having no
users after the change, we can just drop it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The struct is called virPCIDeviceAddress and the
functions operating on it should be named accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add a new modifier letter for virJSONValueObjectAddVArgs which will add
a boolean value with our tristate semantics. The value is omitted when
the _ABSENT value is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
A generic "failed to parse xml document" message without telling us
which XML file failed is quite unhelpful.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This fixes virCgroupEnableMissingControllers where virCgroupRemove
was not called in case virCgroupMakeGroup failed.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The case where we need path of any controller is only for internal use
so move it out to a different function.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The 'mntDir' is part of 'struct mntent' as a result of getmntent_r
therefore we should not mangle with it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Fixes:
https://www.redhat.com/archives/libvir-list/2017-January/msg00978.html
QEMU is probed through monitor fd to check capabilities during libvirtd init.
The monitor fd is closed after probing by virQEMUCapsInitQMPCommandFree
that calls virQEMUCapsInitQMPCommandAbort that calls qemuMonitorClose,
the latter one notifies the event loop via an interrupt handle in
qemuMonitorUnregister and after then closes monitor fd.
There could be a case when interrupt is sent after eventLoop is unlocked
but before virEventPollRunOnce blocks in poll, shortly before file
descriptor is closed by qemuMonitorClose. Then poll receives closed monitor
fd in fdset and returns EBADF.
EBADF is not mentioned as a valid errno on macOS poll man-page but such
behaviour can appear release-to-release, according to cpython:
https://github.com/python/cpython/blob/master/Modules/selectmodule.c#L1161
The change also fixes the issue in qemucapabilitiestest. It returns
Bad file descriptor message 25 times without the fix.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In cases where virProcessKillPainfully already reailizes that
SIGTERM wasn't enough we are partially on a bad path already.
Maybe the system is overloaded or having serious trouble to free and
reap resources in time.
In those case give the SIGKILL that was sent after 10 seconds some more
time to take effect if force was set (only then we are falling back to
SIGKILL anyway).
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It was found that in cases with host devices virProcessKillPainfully
might be able to send signal zero to the target PID for quite a while
with the process already being gone from /proc/<PID>.
That is due to cleanup and reset of devices which might include a
secondary bus reset that on top of the actions taken has a 1s delay
to let the bus settle. Due to that guests with plenty of Host devices
could easily exceed the default timeouts.
To solve that, this adds an extra delay of 2s per hostdev that is associated
to a VM.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Rather than forcing the caller to generate an error, let's
generate the Username or Password error message failure if
the auth->cb fails. This is the last error path that needs
a specific message for various callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
If we never find the valid credtype in the list, then we'd return
NULL without an error signaled forcing the caller to generate one
that will probably be incorrect. Let's be specific.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Now that the virAuthGet*Path helpers make the checks, we can remove
them from here.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Before trying to call @auth->cb, let's ensure it exists.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Before trying to dereference @auth, let's ensure it's valid.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Instead of adding the same check for every drivers, execute the checks
in virAuthGetUsername and virAuthGetPassword. These funtions are called
when user is not set in the URI.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Currently iohelper's error log is recorded in virFileWrapperFdClose.
However, if something goes wrong the caller might not even get to
calling virFileWrapperFdClose and call virFileWrapperFdFree
directly. Therefore the error reporting should happen there.
Signed-off-by: xinhua.Cao <caoxinhua@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While in most cases the values are going to be much
smaller than our arbitrary 4096 limit, there is really
no guarantee that would be the case: in fact, a few
aarch64 servers have been spotted in the wild with
core_id as high as 6216.
Take advantage of virBitmap's ability to automatically
alter its size at runtime to accomodate such values.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
