https://bugzilla.redhat.com/show_bug.cgi?id=1686927
When trying to create a nwfilter binding via
nwfilterBindingCreateXML() we may encounter a crash. The sequence
of functions called is as follows:
1) nwfilterBindingCreateXML() parses the XML and calls
virNWFilterBindingObjListAdd() which calls
virNWFilterBindingObjListAddLocked()
2) Here, @binding is not found because binding->remove is set.
3) Therefore, controls continue with creating new @binding,
setting its def to the one from 1) and adding it to the hash
table.
4) This fails, because the binding is still in the hash table
(duplicate key is detected).
5) The control jumps to 'error' label where
virNWFilterBindingObjEndAPI() is called which frees the binding
definition passed.
6) Error is propagated to the caller, which calls
virNWFilterBindingDefFree() over the definition again.
The solution is to unset binding->def in case of failure so it's
not freed in step 5).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Storage source private data can be parsed along with other components of
private data rather than a separate function which is called from
multiple places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainDiskSourcePrivateDataParse and virDomainDiskSourcePRParse don't
need the 'cleanup' label any more thanks to VIR_XPATH_NODE_AUTORESTORE.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function does not have any code in the 'cleanup' label so we can
simplify the control flow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a1c453dc08, during VIR_AUTOFREE() rewrite this wasn't done
properly. @port might be leaked because it's allocated in a for()
loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In 669018bc9c I've introduced def->refresh which might be
allocated by virStoragePoolDefRefreshParse() but is never freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The refresh_volume_allocation variable in
virStoragePoolDefParseXML() has been unused since its
introduction in commit 669018bc9c, and Clang rightfully
complains about this fact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The new 'refresh' element can override the default refresh operations
for a storage pool. The only currently supported override is to set
the volume allocation size to the volume capacity. This can be specified
by adding the following snippet:
<pool>
...
<refresh>
<volume allocation='capacity'/>
</refresh>
...
</pool>
This is useful for certain backends where computing the actual allocation
of a volume might be an expensive operation.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After this, newly added enums will not automatically show up in
driver output unless the driver code specifically sets report=true
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virCapsEnum report is an internal bool indicating whether we
should format the enum in the XML at all. This is unused for
now but will be handled in future patches.
We use a plain bool instead of tristate because the case here
is a bit different than the explicit @supported output. We
already report the equivalent of supported=YES|NO based on
what enum values are filled in. This adds report=false to
handle the ABSENT case.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Change domcaps to skip formatting XML if the default
TRISTATE_BOOL_ABSENT is found. Now when domcaps is extended, driver
XML output won't change until an explicit TRISTATE_BOOL value is set
in driver code.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Switch most 'supported' handling to use virTristateBool, so eventually
we can handle the ABSENT state.
For now the XML formatter treats ABSENT the same as FALSE, so there's
no functional output change. This will be addressed in later patches
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Similar to the macros we have for formatting enums, add a macro to
simplify formatting the pattern:
<FOO supported='yes|no'/>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This info can be useful to filter devices visible
to mgmt clients so that they won't see devices that
unsafe/not meaningful to pass thru.
Provide class info the way it is provided by udev or
kernel that is as single 6-digit hexadecimal.
Class element is not optional. I guess this should not
break users that use virNodeDeviceCreateXML because
they probably specify only scsi_host capability on
input and then node device driver gets other capabilities
from udev after device appeared.
HAL driver does not get support for the new element in
this patch.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Vim treats *.h files as cpp ones with respect to syntax highlighting.
Thus "class" in _virNodeDevCapPCIDev highlighted mistakenly.
This can be fixed by filetype detection code tunables but it
is more convinient to skip this tuning by every project member.
Let's just use "klass" as field name instead of _class or class
and add syntax rule.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
snapshot_conf.h was mixing three separate types: the snapshot
definition, the snapshot object, and the snapshot object list.
Separate out the snapshot object list code into its own file, and
update includes for affected clients.
This is just code motion, but done in preparation of sharing a lot of
the object list code with checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The next patch will require access to the helper functions
virDomainSnapshotDefFormatInternal and
virDomainSnapshotRedefineValidate from two different files; make the
file split easier by exporting these functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
snapshot_conf.h was mixing three separate types: the snapshot
definition, the snapshot object, and the snapshot object list.
Separate out the snapshot object code into its own file, which
includes moving a typedef to avoid circular inclusions.
Mostly straight code motion, although I fixed a comment along
the way, now that virDomainSnapshotForEachDescendent now
guarantees a topological visit (missed in b647d219).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's easier to locate a typedef if they are stored in sorted order;
do so mechanically via:
$ sed -i '/typedef struct/ {N; N; s/\n//g}' src/conf/virconftypes.h
$ # sorting the lines
$ sed -i '/typedef struct/ s/;/;\n/g' src/conf/virconftypes.h
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As explained in the previous patch, collecting pointer typedefs into a
common header makes it easier to avoid circular inclusions. Continue
the efforts by pulling the appropriate typedefs from capabilities.h
into the new header.
This patch is just straight code motion (all typedefs are listed in
the same order before and after the patch); a later patch will sort
things for legibility.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now, snapshot_conf.h is rather large - it deals with three
separate types: virDomainSnapshotDef (the snapshot definition as it
maps to XML), virDomainSnapshotObj (an object containing a def and the
relationship to other snapshots), and virDomainSnapshotObjList (a list
of snapshot objects), where two of the three types are currently
public rather than opaque. What's more, the types are circular: a
snapshot def includes a virDomainPtr, which contains a snapshot list,
which includes a snapshot object, which includes a snapshot def.
In order to split the three objects into separate files, while still
allowing each header to use sane typedefs to incomplete pointers, the
obvious solution is to lift the typedefs into yet another header, with
no other dependencies. Start the split by factoring out all struct
typedefs from domain_conf.h (enum typedefs don't get used in function
signatures, and function typedefs tend not to suffer from circular
referencing, so those stay put). The only other exception is
virDomainStateReason, which is only ever used directly rather than via
a pointer.
This patch is just straight code motion (all typedefs are listed in
the same order before and after the patch); a later patch will sort
things for legibility.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a simple validation helper to perform the cputune period and
quota checks so that we can get rid of those repetitive chunks. Since
this is a validation helper, this patch also moves the checks from the
'parse' phase into the 'validation' phase.
Signed-off-by: Suyang Chen <dawson0xff@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.html
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
An upcoming patch wants to reuse XML parsing of both unix and tcp
network host descriptions in the context of setting up a backup
NBD server. Make that easier by refactoring the existing parser.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
xenbus is virtual controller (akin to virtio controllers) for Xen
paravirtual devices. Although all Xen VMs have a xenbus, it has
never been modeled in libvirt, or in Xen native VM config format
for that matter.
Recently there have been requests to support Xen's max_grant_frames
setting in libvirt. max_grant_frames is best modeled as an attribute
of xenbus. It describes the maximum IO buffer space (or DMA space)
available in xenbus for use by connected paravirtual devices. This
patch introduces a new xenbus controller type that includes a
maxGrantFrames attribute.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This helper performs a conversion from a "yes|no" string to a
corresponding boolean. This allows us to drop several repetitive
if-then-else string->bool conversion blocks.
Signed-off-by: Shotaro Gotanda <g.sho1500@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Wire up support for VIR_DOMAIN_SNAPSHOT_LIST_TOPOLOGICAL in the
domain-agnostic support code.
Clients of snapshot_conf using virDomainSnapshotForEachDescendant()
are using a depth-first visit but with postfix visits of a given
node. Changing this to a prefix visit of the given node instantly
turns this into a topologically-ordered visit. (A prefix
breadth-first visit would also be topologically sorted, but that
requires a queue while our recursion naturally has a stack).
With that change, we now always have a topological sort for
virDomainSnapshotListAllChildren() regardless of the new public API
flag. Then with one more tweak, we can also get a topological rather
than a faster random hash visit for virDomainListAllSnapshots(), by
doing a descendent walk from our internal metaroot (there, we let the
public API flag control behavior, because a topological sort DOES
require more stack and slightly more time).
Note that virDomainSnapshotForEach() still uses a random hash visit;
we could change that signature to take a tri-state for random, prefix,
or postfix visit if we ever had clients that cared about the
distinctions, but for now, none of the drivers seem to care.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The idea is that using this attribute users enable libvirt to
automagically select firmware image for their domain. For
instance:
<os firmware='efi'>
<type arch='x86_64' machine='pc-q35-4.0'>hvm</type>
<loader secure='no'/>
</os>
<os firmware='bios'>
<type arch='x86_64' machine='pc-q35-4.0'>hvm</type>
</os>
(The automagic of selecting firmware image will be described in
later commits.)
Accepted values are 'bios' and 'efi' to let libvirt select
corresponding type of firmware.
I know it is a good sign to introduce xml2xml test case when
changing XML config parser but that will have to come later.
Firmware auto selection is not enabled for any driver just yet so
any xml2xml test would fail right away.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is going to extend virDomainLoader enum. The reason is that
once loader path is NULL its type makes no sense. However, since
value of zero corresponds to VIR_DOMAIN_LOADER_TYPE_ROM the
following XML would be produced:
<os>
<loader type='rom'/>
...
</os>
To solve this, introduce VIR_DOMAIN_LOADER_TYPE_NONE which would
correspond to value of zero and then use post parse callback to
set the default loader type to 'rom' if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Except not really. At least for now.
In the future, the firmware will be selected automagically.
Therefore, it makes no sense to require the pathname of a
specific firmware binary in the domain XML. But since it is not
implemented do not really allow the path to be NULL. Only move
code around to prepare it for further expansion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we pass XML to virDomainDefineXML API with these two elements:
...
<title></title>
<description></description>
...
libvirt correctly ignores these two elements and they will not appear
in the parsed XML.
However, if we use virDomainSetMetadata API and with "" as value for
title or description we will end up with the parsed XML that contains
these empty elements.
Let's fix the behavior of this API to behave the same as
virDomainDefineXML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1518042
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add a new function to make it possible to parse a list of snapshots
at once. This is a counterpart to an earlier patch making it
possible to produce all snapshots in a single XML string, and
intentionally parses the same top-level element <snapshots> with
an optional attribute current='name'.
Note that since we know we started with no relations at all, and
since checking parent relationships per-snapshot is not viable as
we don't control which order the snapshots appear in, that we are
fine with doing a final pass to update all parent/child
relationships among the definitions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Pull out the portion of virDomainSnapshotRefinePrep() that deals
with definition sanity into a separate helper routine that can
be reused with bulk redefine, leaving behind only the code
specific to loop checking and in-place updates that are only
needed in single-definition handling.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Right now, the only callers of qemuDomainSnapshotDiscardAllMetadata()
are right before freeing the virDomainSnapshotObjList, so it did not
matter if the list's metaroot (which points to all the defined root
snapshots) is left inconsistent. But an upcoming patch will want to
clear all snapshots if a bulk redefine fails partway through, in
which case things must be reset. Make this work by teaching the
existing virDomainSnapshotUpdateRelations() to be safe regardless of
the incoming state of the metaroot (since we don't want to leak that
internal detail into qemu code), then fixing the qemu code to use
it after deleting all snapshots. Additionally, the qemu code must
reset vm->current_snapshot if the current snapshot was removed,
regardless of whether the overall removal succeeded or failed later.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a new function to output all of the domain's snapshots in one
buffer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Split out an internal helper that produces format into a
virBuffer, similar to what domain_conf.c does, and making
the next patch easier to write.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
virDomainSnapshotDefFormat currently takes two sets of knobs:
an 'unsigned int flags' argument that can currently just be
VIR_DOMAIN_DEF_FORMAT_SECURE, and an 'int internal' argument used as
a bool to determine whether to output an additional element. It
then reuses the 'flags' knob to call into virDomainDefFormatInternal(),
which takes a different set of flags. In fact, prior to commit 0ecd6851
(1.2.12), the 'flags' argument actually took the public
VIR_DOMAIN_XML_SECURE, which was even more confusing. Let's borrow
from the style of that earlier commit, by introducing a function
for translating from the public flags (VIR_DOMAIN_SNAPSHOT_XML_SECURE
was just recently introduced) into a new enum specific to snapshot
formatting, and adjust all callers to use snapshot-specific enum
values when formatting, and where the formatter now uses a new
variable 'domainflags' to make it obvious when we are translating
from snapshot flags back to domain flags. We don't even have to
use the conversion function for drivers that don't accept the
public VIR_DOMAIN_SNAPSHOT_XML_SECURE flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The existing virDomainSnapshotState is a superset of virDomainState,
adding one more state (disk-snapshot) on top of valid domain states.
But as written, the enum cannot be used for gcc validation that all
enum values are covered in a strongly-typed switch condition, because
the enum does not explicitly include the values it is adding to.
Copy the style used in qemu_blockjob.h of creating new enum names
for every inherited value, and update most clients to use the new
enum names anywhere snapshot state is referenced. The exception is
two switch statements in qemu code, which instead gain a fixme
comment about odd type usage (which will be cleaned up in the next
patch). The rest of the patch is fairly mechanical (I actually did
it by temporarily s/state/xstate/ in snapshot_conf.h to let the
compiler find which spots in the code used the field, did the
obvious search and replace in those functions, then undid the rename).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Failure would have occurred for @ctxt before in callers' other
virXPath calls and @def derefs.
Found by Coverity due to commit 66a508d2 using VIR_XPATH_NODE_AUTORESTORE
to access @ctxt before the if condition. The @def was noted by review.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Capabilities should not duplicate data that are obvious from our
documentation and will not change with different QEMU binaries
or the way how we compile libvirt.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When dealing with internal paths we don't need to worry about
whether or not suffixes are lowercase since we have full control
over them, which means we can avoid performing case-insensitive
string comparisons.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
In addition to the obvious s/File/String/, also tweak the name
to make it clear that the presence of the suffix is verified
using case-insensitive comparison.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
In these cases the check that is removed has been done a few
lines above already (as can even be seen in the context). Drop
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support to format the storage pool capabilities using
the virStoragePoolTypeInfoPtr to determine what capabilities
exist for the various pools and the driver capabilities to
determine whether the pool is compiled in and supported.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1581670
During storage driver backend initialization, let's save
which backends are available in the storage pool capabilities.
In order to format those, we need add a connectGetCapabilities
processor to the storageHypervisorDriver. This allows a storage
connection, such as "storage:///system" to find the API and
format the results, such as:
virsh -c storage:///system capabilities
<capabilities>
<pool>
<enum name='type'>
<value>dir</value>
<value>fs</value>
<value>netfs</value>
<value>logical</value>
<value>iscsi</value>
<value>iscsi-direct</value>
<value>scsi</value>
<value>mpath</value>
<value>disk</value>
<value>rbd</value>
<value>sheepdog</value>
<value>gluster</value>
<value>zfs</value>
</enum>
</pool>
</capabilities>
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce the bare bones functions to processing capability
data for the storage driver.
Since there will be no need for the <host> output, we need
to filter that data.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The ZFS pool is documented as not using pool format types, so remove
the defaultFormat value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The multipath pool is documented as not using the volume type,
so let's just remove it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The iscsi and iscsi-direct pools are documented as not using
the volume type, so let's just remove it. Besides it would
have produced bad output since formatting uses the Disk types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The scsi pool is documented as not using the volume type,
so let's just remove it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The rbd pool is documented as not using the volume type,
so let's just remove it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The sheepdog pool is documented as not using the volume type,
so let's just remove it. Besides it would have produced bad
results since the defaultType is FILE but the formatting used
the Disk types.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than moving the XPath root node in the caller and then still
passing it down, make sure that the callees move the node themselves.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove logic necessary to figure out whether to format the 'features'
element by using virXMLFormatElement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement for the formatting which allows us to avoid
looking through the array to see if any feature is enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If none of the 'capabilities' features are enabled we'd still format the
opening and closing tag for the <capabilities element.
The implementation is suboptimal but will be refactored for a better
approach. This is done prior to the refactor to show that tests are not
impacted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use VIR_AUTOCLEAN to avoid leaking the buffer on error path and get rid
of resetting mid loop since virXMLFormatElement does the reset
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'i' is always in range of the enum, thus the name is always populated by
virDomainFeatureTypeToString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These buffers are used temporarily for some of the partial formatters
but not globally. Prefix the name with 'tmp' to be explicit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pure code motion of code for formatting domain features to a function
called virDomainDefFormatFeatures. Best viewed with the '--patience'
option for git show.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the code into a separate function named
virDomainDefFormatBlkiotune and use virXMLFormatElement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the function to use the XML formatting aid and use automatic
cleaning to simplify the control flow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After commits e2087c2 and ec0793de older GCC started act very smart and
complain about potentially uninitialized variable, which existed prior
to these patches + even if the affected vars were left uninitialized the
function responsible for filling them in would have failed with NULL
being returned which the caller has always handled carefully.
Although GCC complained only about a single variable, let's initialize
all of them so as to prevent any further potential breakages.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add <controller type='scsi' model handling for virtio transitional
devices. Ex:
<controller type='scsi' model='virtio-transitional'/>
* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"
The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<filesystem> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-9p-pci-{non-}traditional in qemu, let's add a standard
model= attribute. The accepted values are:
- virtio
- virtio-transitional
- virtio-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
qemu vhost-scsi devices map to XML roughly like:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn=X/>
</hostdev>
To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.
Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.
Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1658504
This function is called when a domain is starting up (in qemu
driver that is when qemu cmd line is generated). It is used to
translate <disk type='volume'/> to something usable by filling in
virStorageSource (e.g. fetching disk path, or some connection URI
for a network FS). But some of these info are not stored in
status XML and thus the function is called on
qemuProcessReconnect too to reconstruct runtime data. But this
poses a problem because after the first run the mode is set to
'direct', but in the second run this triggers a failure because
mode is valid only for 'iscsi' volumes and not 'iscsi-direct'
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Rewrite the code to make usage of some VIR_AUTOFREE logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we're using VIR_AUTOFREE there's quite a bit of clean up
possible for now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities for VIR_FREE consumers.
In some cases adding or removing blank lines for readability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In preparation for VIR_AUTOFREE usage, let's remove a couple
of unused variables so that clang compilations won't fail.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we're using VIR_AUTOPTR(virBitmap) there's a couple of methods
that we can clean up some now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities for virBitmapPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In preparation for using auto free mechanism, change to using the
VIR_STEAL_PTR on @def to @ret and of course be sure to properly clean
up @def in cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Due to historical back-compat, bare 'virsh snapshot-create-as'
favors internal snapshots (but can't be used on domains with raw
storage), while 'virsh snapshot-create-as --disk-only' favors
external snapshots. What's more, snapshots created with
--disk-only while the domain was running are marked as snapshot
state 'disk-snapshot', while snapshots created while the domain
was offline are marked as snapshot state 'shutdown' (a
'disk-snapshot' image might not be quiescent, while a 'shutdown'
snapshot always is).
But this leads to some interesting problems: if we create a
--disk-only snapshot of an offline guest, and then immediately try
to 'virsh snapshot-create --redefine' using the resulting XML to
overwrite the existing snapashot in place, things silently succeed,
but 'virsh snapshot-create --redefine --disk-only' fails with an
error message that the snapshot state is not 'disk-only'. Worse,
if we delete the snapshot metadata first and then try to recreate
things, omitting --disk-only fails because the verification code
wants to force the default of an internal snapshot (which doesn't
work with raw disks), and using --disk-only still fails because the
snapshot XML is not 'disk-only' - making it impossible to recreate
the snapshot metadata (or to transfer it from one libvirtd host to
another). Ideally, the presence or absence of the --disk-only
flag, and the presence or absence of an existing snapshot being
overwritten, shouldn't matter; if the XML is valid for one
situation, it should always be valid to redefine the metadata for
that snapshot.
Fix things by uniformly using virDomainSnapshotDefIsExternal()
(caching the results up front, and eliminating other 'if' clauses
now rendered redundant) when deciding whether the XML being
requested for redefinition should permit external or force internal
state capture (we got it right in only one out of three places in
the function).
See also https://bugzilla.redhat.com/1680304; this fixes the
domain-agnostic problems mentioned there, but another patch is
needed to fix further oddities with the qemu driver. I did not
check for sure when the problems were introduced (git blame puts
some affected hunks as far back as 1.0.0), but it was definitely
been broken even before when commit 670e86bf (1.1.4) factored
redefine prep out of qemu code into the common snapshot_conf code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Upcoming patches plan to introduce virDomainCheckpointPtr as a new
object for use in incremental backups, along with documentation on
how incremental backups differ from snapshots. But first, we need
to rename any existing mention of a 'system checkpoint' to instead
be a 'full system snapshot', so that we aren't overloading
the term checkpoint.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Replace virDomainChrSourceDefFree with virObjectUnref.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Introduce the 'msrs' feature element that controls Model Specific
Registers related behaviour. At this moment it allows only
single tunable attribute "unknown":
<msrs unknown='ignore|fault'/>
Which tells hypervisor to ignore accesses to unimplemented
Model Specific Registers. The only user of that for now is going
to be the bhyve driver.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Most of the code base is fairly consistent about using the name
'uuidstr' when dealing with a formatted human-readable form, and
'uuid' when dealing with the smaller raw bytes form. Fix
snapshot_conf to comply, as well as reducing the scope of a human
string to only the error message that needs it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Many drivers had a comment that they did not validate the incoming
'flags' to virDomainGetXMLDesc() because they were relying on
virDomainDefFormat() to do it instead. This used to be the case
(at least since 461e0f1a and friends in 0.9.4 added unknown flag
checking in general), but regressed in commit 0ecd6851 (1.2.12),
when all of the drivers were changed to pass 'flags' through the
new helper virDomainDefFormatConvertXMLFlags(). Since this helper
silently ignores unknown flags, we need to implement flag checking
in each driver instead.
Annoyingly, this means that any new flag values added will silently
be ignored when targeting an older libvirt, rather than our usual
practice of loudly diagnosing an unsupported flag. Add comments
in domain_conf.[ch] to remind us to be extra vigilant about the
impact when adding flags (a new flag to add data is safe if the
older server omitting the requested data doesn't break things in
the newer client; a new flag to suppress data rather than enhancing
the existing VIR_DOMAIN_XML_SECURE may form a data leak or even a
security hole).
In the qemu driver, there are multiple callers all funnelling to
qemuDomainDefFormatBufInternal(); many of them already validated
flags (and often only a subset of the full set of possible flags),
but for ease of maintenance, we can also check flags at the common
helper function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Only one of the three callers of virPCIDeviceAddressFormat correctly
handles an error return status. Fortunately it can't fail so can be
made void.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that virStorageSource is a subclass of virObject we can use
virObjectUnref and remove virStorageSourceFree which was a thin wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since virStorageSource is now a subclass of virObject, we can use
VIR_AUTOUNREF instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add virStorageSourceNew and refactor places allocating that structure to
use the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we've moved all the actual code into helper
functions, we can turn it into a switch statement.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minor tweaks to ensure compliance with our coding style.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minor tweaks to ensure compliance with our coding style.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minor tweaks to ensure compliance with our coding style.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If virDomainHostdevSubsysSCSIiSCSIDefParseXML processing finds a
duplicated <auth> structure, we should error out rather than continue.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the need for the @name variable by directly assigning
into source->hosts[i].name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than having an error path, let's rework the code to allocate
and fill into an @def variable and then steal that into @ret when we
are successful leaving just a cleanup: path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than having an error path, let's rework the code to allocate
and fill into an @def variable and then steal that into @ret when we
are successful leaving just a cleanup: path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The number of iothreads is not part of the vm state sent during
migration, nor exposed to the guest ABI, so this restriction is
a mistake in libvirt. Let's remove that bit of code.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jie Wang <wangjie88@huawei.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.
Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_LOG_INIT calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.
Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.
While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Since we're setting the zone anyway, it will be useful to allow
setting a different (custom) zone for each network. This will be done
by adding a "zone" attribute to the "bridge" element, e.g.:
...
<bridge name='virbr0' zone='myzone'/>
...
If a zone is specified in the config and it can't be honored, this
will be an error.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A copy+paste mistaken meant the wrong enum -> string convertor
function was used for the error when an incorrect feature capability was
used.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
'val' is initialized from virDomainCapsFeatureTypeFromString and a
few lines earlier there was already a check for 'val < 0'.
The 'val >= 0' is thus always true. The enum conversion similarly
ensures that the val will be less than VIR_DOMAIN_CAPS_FEATURE_LAST,
so "val < VIR_DOMAIN_CAPS_FEATURE_LAST' is thus always true too.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the infrastructure necessary to manage a Storage Pool XML
Namespace. The general concept is similar to virDomainXMLNamespace,
except that for Storage Pools the storage backend specific details
can be stored within the _virStoragePoolOptions unlike the domain
processing code which manages its xmlopt's via the virDomainXMLOption
which is allocated/passed around for each domain.
This patch defines the add the parse, format, free, and href methods
required to process the XML and callout from the Storage Pool Def
parse, format, and free API's to perform the action on the XML data
for/from the backend.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an optional way to define which NFS Server version will be
used to content the target NFS server.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than deref off of "caps->guests", let's pass "caps->guests" and
caps->nguests to have the helper use "guests[i]->" instead.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Let's extract out the <guest> code into it's own method/helper.
NB: One minor change between the two is usage of "buf" instead
of "&buf" in the new code since we pass the address of &buf to
the helper.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than deref off of "caps->host.", let's pass "&caps->host"
and make the helper use "host->" instead.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Let's extract out the <host> code into it's own method/helper.
NB: One minor change between the two is usage of "buf" instead
of "&buf" in the new code since we pass the address of &buf to
the helper.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:
@ rule1 @
identifier a, b;
@@
- b = a;
...
- a = NULL;
+ VIR_STEAL_PTR(b, a);
Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is essentially a wrapper for easily setting the variable
name in virDomainDeviceDef that matches its associated
VIR_DOMAIN_DEVICE_TYPE.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This will be extended in the future, so let's simplify things by
centralizing the checks.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
If the two sysfs_path are both NULL, there may be an incorrect
object returned for virNodeDeviceObjListFindBySysfsPath().
This check exists in old interface virNodeDeviceFindBySysfsPath().
e.g.
virNodeDeviceFindBySysfsPath(virNodeDeviceObjListPtr devs,
const char *sysfs_path)
{
...
if ((devs->objs[i]->def->sysfs_path != NULL) &&
(STREQ(devs->objs[i]->def->sysfs_path, sysfs_path))) {
...
}
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn>
13 bytes in 1 blocks are definitely lost in loss record 44 of 179
at 0x4C2EE6F: malloc (vg_replace_malloc.c:299)
by 0x9514A69: strdup (in /lib64/libc-2.27.so)
by 0x5E60C0B: virStrdup (virstring.c:956)
by 0x54C856F: virHostGetDRMRenderNode (qemuxml2argvmock.c:190)
by 0x57CB4E3: qemuProcessGraphicsSetupRenderNode (qemu_process.c:4860)
by 0x57CB571: qemuProcessSetupGraphics (qemu_process.c:4881)
by 0x57CE01B: qemuProcessPrepareDomain (qemu_process.c:6040)
by 0x57D102E: qemuProcessCreatePretendCmd (qemu_process.c:6975)
by 0x114C1C: testCompareXMLToArgv (qemuxml2argvtest.c:611)
by 0x134B90: virTestRun (testutils.c:174)
by 0x123478: mymain (qemuxml2argvtest.c:1697)
by 0x136BFA: virTestMain (testutils.c:1112)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
A helper function for allocating the virDomainGraphicsDef structure.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:
<devices>
...
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/dax0.0</path>
<alignsize unit='MiB'>2</alignsize>
</source>
<target>
<size unit='MiB'>4094</size>
<node>0</node>
<label>
<size unit='MiB'>2</size>
</label>
</target>
</memory>
...
</devices>
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a syntax-check script that validates header files use a
common layout:
/*
...copyright header...
*/
<one blank line>
#ifndef SYMBOL
# define SYMBOL
....content....
#endif /* SYMBOL */
For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:
#ifndef SYMBOL_ALLOW
# error ....
#endif /* SYMBOL_ALLOW */
<one blank line>
The many mistakes this script identifies are then fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1624336
Add a check during virDomainDefCompatibleDevice whether the
domain supports cold/hotplug of a memory module even though
this duplicates the qemuDomainDefValidateMemoryHotplug check.
Without this check, the cold/hot plug would fail on the
subsequent mem_memory check (since it's 0). Adding a check
for max_memory > 0 would allow the subsequent hotplug check
to fail, but would cause coldplug to fail with the somewhat
opaque message "no free memory device slot available".
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
If virDomainDefCompatibleDevice fails because there is insufficient
domain def->mem.max_memory, then let's also print out that value in
the error message.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The QEMU validation code for graphics has been in place for a while, but
because it is only executed from virDomainDeviceInfoIterateInternal, it
was never run, since the iterator expects the device to have boot info
which graphics don't have. The unfortunate side effect of this whole mess
was that a few capabilities were missing from the test suite (as commit
d8266ebe1 demonstrated with graphics-spice-invalid-egl-headless test),
which in turn meant that a few graphics tests which expected a failure
happily accepted any failure the test runtime returned which made them
succeed. The impact of this was that we then allowed to start a domain
with multiple OpenGL-enabled graphics devices.
This patch enables iteration over graphics devices. Unsurprisingly,
a few tests started to fail as a result, so fix those too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Validation of domain devices is accomplished via a generic device
iterator which takes a callback, iterates over all kinds of supported
device types and invokes the callback on every single device. However,
there might be cases when we need to alter the behaviour of the
iteration (most notably skip or include a group of devices). Therefore,
this patch introduces iterator flags.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 255e0732 introduced a few graphics-related helpers. The problem
is that virDomainGraphicsNeedsAutoRenderNode returns true if it gets
NULL as a response from virDomainGraphicsNeedsAutoRenderNode. That's
okay for egl-headless because that one always needs a DRM render node,
the same is not true for SPICE though, and unless the XML specifies
<gl enable='yes'> for SPICE, there's no need for any renderer.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already have a way stricter check in the code which is doing the
snapshot so duplicating it in the parser does not make much sense. Also
gets rid of an ugly ternary operator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function clears and frees the passed buffers on success, but not in
one case of failure. Modify the control flow that the args are always
consumed, record it in the docs and remove few pointless cleanup paths
in callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we need to specify the rendernode option onto QEMU cmdline, we
need this union member to retain consistency in how we build the
cmdline.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A few simple helpers that allow us to determine whether a graphics can
and will need to make use of a DRM render node.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since this is something between PV and HVM, it makes sense to put the
setting in place where domain type is specified.
To enable it, use <os><type machine="xenpvh">xenpvh</type></os>. It is
also included in capabilities.xml, for every supported HVM guest type - it
doesn't seems to be any other requirement (besides new enough Xen).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
virXMLFormatElement() might fail, but we were not checking
its return value.
Fixing this requires us to change virDomainDeviceInfoFormat()
so that it can report an error back to the caller.
Introduced-by: 0d6b87335c
Spotted-by: Coverity
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In many cases, an early exit from a function would cause
memory allocated by local virBuffer instances not to be
released.
Provide proper cleanup paths to solve the issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This avoids setting 'ret' multiple times, which will result
in errors being masked if the first operation fails but the
second one succeeds.
Introduced-by: f183b87fc1
Spotted-by: Coverity
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add a new memoryBacking source type "memfd", supported by QEMU (when
the capability is available).
A memfd is a specialized anonymous memory kind. As such, an anonymous
source type could be automatically using a memfd. However, there are
some complications when migrating from different memory backends in
qemu (mainly due to the internal object naming at this point, but
there could be more). For now, it is simpler and safer to simply
introduce a new source type "memfd". Eventually, the "anonymous" type
could learn to use memfd transparently in a separate change.
The main benefits are that it doesn't need to create filesystem files,
and it also enforces sealing, providing a bit more safety.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds new functions for reservation, assignment and release
to handle the uid/fid. If the uid/fid is defined in the domain XML,
they will be reserved directly in the collecting phase. If any of them
is not defined, we will find out an available value for them from the
zPCI address hashtable, and reserve them. For the hotplug case there
might not be a zPCI definition. So allocate and reserve uid/fid the
case. Assign if needed and reserve uid/fid for the defined case.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In order to add zPCI child element for PCI address, we update
virDomainDeviceInfoFormat() to format device info by helper function
virXMLFormatElement(). Then we could simply format zPCI address into
child buffer later.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch provides a caching mechanism for the device address
extensions uid and fid on S390. For efficient sparse address allocation,
we introduce two hash tables for uid/fid which hold the address set
information per domain. Also in order to improve performance of
searching available value, we introduce our own callbacks for the two
hashtables. In this way, uid/fid is saved in hash key and hash value
could be any non-NULL pointer due to no operation on hash value. That is
also the reason why we don't introduce hash value free callback.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces PCI address extension flag for virDomainDeviceInfo
and virPCIDeviceAddress. The extension flag in virDomainDeviceInfo is
used internally during calculating PCI extension flag. The one in
virPCIDeviceAddress is the duplicate to indicate extension address is
being used. Currently only zPCI extension address is introduced to deal
with 'uid' and 'fid' on the S390 platform.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Support Hyper-V Enlightened VMCS in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_EVMCS
cases to src/qemu/* for now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Support Hyper-V PV IPI enlightenment in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_IPI
cases to src/qemu/* for now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Introducing <monitor> element under <cachetune> to represent
a cache monitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduced virDomainResctrlNew to do the most part of virDomainResctrlAppend
and move the operation of appending resctrl to @def->resctrls out of
function.
Rather than rely on virDomainResctrlAppend to perform the allocation, move
the onus to the caller and make use of virBitmapNewCopy for @vcpus and
virObjectRef for @alloc, thus removing the need to set each to NULL after the
call.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch introduces a new shutdown reason "daemon" in order
to indicate that the daemon needed to force shutdown the domain
as the best course of action to take at the moment.
This action would occur during reconnection when processing
encounters an error once the monitor reconnection is successful.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
VFIO AP has a limitation on a single device per domain, however, when
commit 11708641 added the support for vfio-ap, check for this limitation
was performed as part of the post parse code. Generally, checks like that
should be performed within the driver's validation callback to eliminate
any slight chance of failing in post parse, which could potentially
result in the domain XML config vanishing.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
There's a lot of stuff going on in src/conf/nodedev_conf which is
sometimes not directly related to config and we're not really consistent
with putting only parser/formatter related stuff here, e.g. like we do
for domains. So, let's start simply by adding a new module
node_device_util containing some of the helpers. Unfortunately, even
though these helpers tend to open a secondary driver connection and would
be much therefore better suited as a nodedev driver module, we can't do
that without pulling headers from the driver into conf/ and that's wrong
because we want conf/ to stay driver-agnostic.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Adjusting domain format documentation, adding device address
support and adding command line generation for vfio-ap.
Since only one mediated hostdev with model vfio-ap is supported a check
disallows to define domains with more than one such hostdev device.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Chris Venteicher <cventeic@redhat.com>
The @alloc object returned by virDomainResctrlVcpuMatch is not
properly referenced and un-referenced in virDomainCachetuneDefParse.
This patch fixes this problem.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In virDomainMemoryDefParseXML and virDomainVideoDefParseXML if
the VIR_ALLOC fails and NULL is returned, then the alteration
to ctxt->node isn't reversed.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There seems to be no need to add the ignore_value wrapper or
caste with (void) to the unlink() calls, so let's just remove
them. I assume at one point in time Coverity complained. So,
let's just be consistent - those that care to check the return
status can and those that don't can just have the naked unlink.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This patch is introducing cache monitor(CMT) to cache and
memory bandwidth monitor(MBM) for monitoring CPU memory
bandwidth.
The host capability of the two monitors is also introduced
in this patch.
For CMT, the host capability is shown like:
<host>
...
<cache>
<bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'>
<control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/>
</bank>
<monitor level='3' 'reuseThreshold'='270336' maxMonitors='176'>
<feature name='llc_occupancy'/>
</monitor>
</cache>
...
</host>
For MBM, the capability is shown like this:
<host>
...
<memory_bandwidth>
<node id='1' cpus='6-11'>
<control granularity='10' min ='10' maxAllocs='4'/>
</node>
<monitor maxMonitors='176'>
<feature name='mbm_total_bytes'/>
<feature name='mbm_local_bytes'/>
</monitor>
</memory_bandwidth>
...
</host>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move memory bandwidth capability nodes into one data structure,
this allows us to add a monitor for memory bandwidth.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move all cache banks into one data structure, this allows
us to add other cache component, such as cache monitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Functions that deal with virPCIDeviceAddress exclusively
belong to util/virpci.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Otherwise after libvirtd restart we come back to issues fixed by
introducing this flag in [1].
[1] 61a0026a : qemu: Fix xml dump of autogenerated websocket
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 82327038 moved a couple of checks out of the XML parser
into the domain validation; however, those checks seem to be more
useful as hypervisor specific checks rather than the more general
domain conf checks (nothing in the docs indicate a specific error).
Fortunately only QEMU was processing the memoryBacking, thus
add the changes to qemuDomainDefValidateMemory and change the
code a bit to make usage of the similar deref to def->mem and
the mem->nhugepages filter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.
Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.
To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.
This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.
Resolves: https://bugzilla.redhat.com/1601318
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Attempting to use a chardev definition like
<serial type='unix'>
<target type='isa-serial'/>
</serial>
correctly results in an error being reported, since the source
path - a required piece of information - is missing; however,
the very similar
<serial type='unix'>
<target type='pci-serial'/>
</serial>
was happily accepted by libvirt, only to result in libvirtd
crashing as soon as the guest was started.
The issue was caused by checking the chardev's targetType
against whitelisted values from virDomainChrChannelTargetType
without first checking the chardev's deviceType to make sure
it is actually a channel, for which the check makes sense,
rather than a different type of chardev.
The only reason this wasn't spotted earlier is that the
whitelisted values just so happen to correspond to USB and
PCI serial devices and Xen and UML consoles respectively,
all of which are fairly uncommon.
https://bugzilla.redhat.com/show_bug.cgi?id=1609720
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since its introduction in commit 2e37bf42 the naming of the arguments
between the prototype and the definition does not match.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
To add CMT/MBM feature and let code be consistent in later patches,
renaming variable name from 'controlBuf' to 'childrenBuf', locates
in functions 'virCapabilitiesFormatCaches' and
'virCapabilitiesFormatMemoryBandwidth'.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1608275
Instantiation of an nwfilter binding is only allowed when
the net->filter is defined for the network; however, the
teardown of the binding does not make this check. This
leaves open the possibility that the teardown could be
called during guest shutdown/teardown in session mode
resulting in the following error being logged:
error : nwfilterConnectOpen:383 : internal error: unexpected
nwfilter URI path '/session', try nwfilter:///system
So before going through the teardown processing, let's
be sure the network had a filter and then attempt to
get a connection. For session mode it's not even possible
create an nwfilter binding.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The struct is called virPCIDeviceAddress and the
functions operating on it should be named accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
These are simple predicates, which makes bool a more
appropriate return type than int.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is called on a virDomainDeviceInfo, so it
should be declared along with it.
Moving this function requires moving and making public
virDomainDeviceCCWAddressIsValid() as well, but that's
perfectly fine since the same reasoning above also
applies to it, due to virDomainDeviceCCWAddress being
(correctly) declared in device_conf.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's used in virDomainDeviceInfo, which makes
domain_conf the wrong place to declare it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Just like a few commits earlier, checking for pool source
duplicates and unlocking pools list afterwards is a buggy
pattern. The check must go into virStoragePoolObjAssignDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The @conn argument is needed only to do some source matching in
case of iSCSI source. Anyway, it's used just for node device
driver and as such can be replaced with virGetConnectNodeDev().
At the same time, the @conn struct member is dropped from
_virStoragePoolObjFindDuplicateData.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This function is going to be made static in used in
virStoragePoolObjAssignDef(). Therefore move it and all the
static functions it calls a few lines up.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even though we do some checking it is not as thorough as it
should be. We already have virStoragePoolObjIsDuplicate but the
way we use it is a typical TOCTOU. Imagine two threads trying to
define two pools with the same name but different UUIDs. With the
current code neither of them finds a duplicate and thus proceed
to virStoragePoolObjAssignDef where only names are compared.
Therefore both threads succeed which is obviously wrong.
We should check for duplicates where we care for them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This function is going to be made static in used in
virStoragePoolObjAssignDef(). Therefore move it a few lines up.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1623157
Changing MTU on a running guest is not possible and trying to do
so made us face many problems. That's why we forbid it in
5f44d7e357. However, there is still one possible path where
users can sneak in change: migration XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1621910
When introducing this check back in 4ad54a417a my mindset was
that if an element is missing in update XML then user is
requesting for removal of the corresponding setting. For
instance, if <bandwidth/> is not present in update XML any QoS
previously set on <interface/> is cleared out. Well this
assumption is correct but only to some extent.
Turns out, we have some users who when updating path to ISO
image construct very minimalistic disk XML and pass it to device
update API. Such XML is lacking a lot of information, and alias
is one of them. This triggers error in
virDomainDefCompatibleDevice() because we think that user is
requesting to remove the alias. Well, they are not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If @vm has flagged as "to be removed" virDomainObjListFindByNameLocked
returns NULL (although the definition actually exists). Therefore, the
possibility exits that "virHashAddEntry" will raise the error
"Duplicate key" => virDomainObjListAddObjLocked fails =>
virDomainObjEndAPI(&vm) is called and this leads to a freeing of @def
since @def is already assigned to vm->def. But actually this leads to
a double free since the common usage pattern is that the caller of
virDomainObjListAdd(Locked) is responsible for freeing @def in case of
an error.
Let's fix this by setting vm->def to NULL in case of an error.
Backtrace:
➤ bt
#0 virFree (ptrptr=0x7575757575757575)
#1 0x000003ffb5b25b3e in virDomainResourceDefFree
#2 0x000003ffb5b37c34 in virDomainDefFree
#3 0x000003ff9123f734 in qemuDomainDefineXMLFlags
#4 0x000003ff9123f7f4 in qemuDomainDefineXML
#5 0x000003ffb5cd2c84 in virDomainDefineXML
#6 0x000000011745aa82 in remoteDispatchDomainDefineXML
...
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.
The name is based on comments in qemu/hw/riscv/virt.c:
RISC-V machine with 16550a UART and VirtIO MMIO
and in qemu/hw/char/serial.c:
QEMU 16550A UART emulation
along with the output of dmesg in the guest:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
base_baud= 230400) is a 16550A
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit deb057f added a switch without a default case.
Add it and call virReportEnumRangeError for _LAST too.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Turn
virPCIDeviceAddressIsEmpty()
virDeviceInfoPCIAddressIsWanted()
virDeviceInfoPCIAddressIsPresent()
from inline functions to regular functions.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The affected functions are
virDeviceInfoPCIAddressWanted()
virDeviceInfoPCIAddressPresent()
which get renamed to
virDeviceInfoPCIAddressIsWanted()
virDeviceInfoPCIAddressIsPresent()
to comply with the naming convention used for other
predicates.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Similarly to backing store indexes which will become stable eventually
we need also to be able to format and store in the status XML for later
use the index for the top level of the backing chain.
Add XML formatter, parser, schema and docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a user configures the backing chain in the XML we should not ignore
it. We already do parse it but don't format it out. As a
safety-precaution don't attempt to format detected chain into the
inactive XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1610072
Due to historical reasons we were not parsing device info on
guestfwd channel. Sure, it doesn't make much sense to parse
<address/> but it surely makes sense to parse its alias (which
might be an user alias).
This reverts commit 47a3dd46ea
which fixed https://bugzilla.redhat.com/show_bug.cgi?id=1172526.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Keep with the recent effort of replacing as many explicit *Free
functions with their automatic equivalents.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
name match functions to be the vir prefix and interface name followed by ObjMatch
ex. for virNetworkObjListExport, the match function is named
virNetworkObjMatch
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
name functions to be the name of the export function followed by Callback
ex. for virInterfaceObjListExport, the callback function is named
virInterfaceObjListExportCallback
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
name structs to be the name of the Export function followed by Data
also tweak definitions to follow standard struct definition pattern
ex. for virInterfaceObjListExport, the struct is defined as follows:
typedef struct _virInterfaceObjListExportData virInterfaceObjListExportData;
typedef virInterfaceObjListExportData *virInterfaceObjListExportDataPtr;
struct _virInterfaceObjListExportData {...};
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add new XML section to report host's memory bandwidth allocation
capability. The format as below example:
<host>
.....
<memory_bandwidth>
<node id='0' cpus='0-19'>
<control granularity='10' min ='10' maxAllocs='8'/>
</node>
</memory_bandwidth>
</host>
granularity ---- granularity of memory bandwidth, unit percentage.
min ---- minimum memory bandwidth allowed, unit percentage.
maxAllocs ---- maximum memory bandwidth allocation group supported.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add return value check to virResctrlAllocForeachCache in
virDomainCachetuneDefFormat. The virResctrlAllocForeachCache does have
return value, so need check return value to make sure function executed
without error.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce a new section memorytune to support memory bandwidth allocation.
This is consistent with existing cachetune. As the example:
below:
<cputune>
......
<memorytune vcpus='0'>
<node id='0' bandwidth='30'/>
</memorytune>
</cputune>
vpus --- vpus subjected to this memory bandwidth.
id --- on which node memory bandwidth to be set.
bandwidth --- the memory bandwidth percent to set.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Factor out vcpus virDomainResctrlDef update from
virDomainCachetuneDefParse and introduce virDomainResctrlAppend.
virDomainResctrlAppend will format vcpus string and append a new
virDomainResctrlDef to virDomainDefPtr. So that this logic can
be reusable.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Factor out vcpus overlapping detecting part from
virDomainCachetuneDefParse and introduce virDomainResctrlVcpuMatch.
Instead of allocating virResctrlAllocPtr by default, allocating
virResctrlAllocPtr after confirm vcpus not overlap with existing ones.
And virDomainResctrlVcpuMatch can be reused by other resource control
technologies. virDomainResctrlVcpuMatch can clarify old vcpus overlap
error whether an overlap or a redefinition.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extract vcpus parsing part from virDomainCachetuneDefParse into one
function called virDomainResctrlParseVcpus. So that vcpus parsing logic
can be reused by other resource control technologies. Adjust error
message and use node->name so that the error message can fit to all
technologies.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Resctrl not only supports cache tuning, but also memory bandwidth
tuning. Renaming cachetune to resctrl to reflect that. With resctrl,
all allocation for different resources (cache, memory bandwidth) are
aggregated and represented by a virResctrlAllocPtr inside
virDomainResctrlDef.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some functions in virresctrl are for CAT only, while some of other
functions are for resource allocation, not just CAT. So change
their names to reflect the reality.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Previously we were ignoring "nodeset" attribute for hugepage pages
if there was no guest NUMA topology configured in the domain XML.
Commit <fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5> partially fixed
that issue but it introduced a somehow valid regression.
In case that there is no guest NUMA topology configured and the
"nodeset" attribute is set to "0" it was accepted and was working
properly even though it was not completely valid XML.
This patch introduces a workaround that it will ignore the nodeset="0"
only in case that there is no guest NUMA topology in order not to
hit the validation error.
After this commit the following XML configuration is valid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
</hugepages>
</memoryBacking>
but this configuration remains invalid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
<page size='1048576' unit='KiB'/>
</hugepages>
</memoryBacking>
The issue with the second configuration is that it was originally
working, however changing the order of the <page> elements resolved
into using different page size for the guest. The code is written
in a way that it expect only one page configured and always uses only
the first page in case that there is no guest NUMA topology configured.
See qemuBuildMemPathStr() function for details.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1591235
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We can safely validate the hugepage nodeset attribute at a define time.
This validation is not done for already existing domains when the daemon
is restarted.
All the changes to the tests are necessary because we move the error
from domain start into XML parse.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The virCapabilitiesDomainDataLookupInternal() is given a list of
parameters representing the desired domain characteristics. It then has
to look throught the capabilities to identify an acceptable match.
The virCapsDomainDataCompare() method is used for filtering out
candidates which don't match the desired criteria. It is called
primarily from the innermost loops and as such is doing many repeated
checks. For example if architcture and os type were checked at the top
level loop the two inner loops could be avoided entirely. If emulator
and domain type were checked in the 2nd level loop the 3rd level loop
can be avoided too.
This change thus removes the virCapsDomainDataCompare() method and puts
suitable checks at the start of each loop to ensure it executes the
minimal number of loop iterations possible. The code becomes clearer to
understand as a nice side-effect.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This structure will be reused by domain disk images as well.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We cannot simply used the same code as for iscsi storage pool because
the default mode is 'host' which is not possible with iscsi-direct.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Validate that the provided XML shmem name is not directory specific to "." or
".." as well as ensure that there is no path separator '/' in the name.
https://bugzilla.redhat.com/show_bug.cgi?id=1192400
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Introducing the pool as a noop. Integration inside the build
system. Implementation will be in the following commits.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1591151
Add function virDomainInputDefValidate to validate input devices.
Make sure evdev attribute of source element is not used by mouse,
keyboard, and tablet input device.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use of enum types for struct fields is generally avoided since it causes
warnings if the compiler assumes the enum is unsigned. For example
commit 8e2982b576
Author: Cole Robinson <crobinso@redhat.com>
Date: Tue Jul 24 16:27:54 2018 -0400
conf: Clean up virDomainDefParseCaps
Introduced a line:
if ((def->virtType = virDomainVirtTypeFromString(virttype)) < 0) {
which causes a build failure with CLang
conf/domain_conf.c:19143:65: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
as the compiler is free to optimize away the "< 0" check due to the
assumption that the enum type is unsigned and always in range.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
SKIP_OSTYPE_CHECKS only hides some error reporting at this point,
so it can be foled into SKIP_VALIDATE
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We should still make an effort to fill in data, just not raise
an error if say an ostype/virttype combo disappeared from caps.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The comment says:
/* If the logic here seems fairly arbitrary, that's because it is :)
* This is duplicating how the code worked before
* CapabilitiesDomainDataLookup was added. We can simplify this,
* but it would take a bit of work because the test suite fails
* in numerous minor ways. */
Nowadays the test suite changes appear quite simple, just extending
test capabilities data a bit so that we aren't trying to define
invalid arch/os/virtType/machine combos
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
- Convert to 'cleanup' label naming
- Use more than one 'tmp' string and do all freeing at the end
- Make the code easier to follow
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
With 'switch' we can utilize the compile time enum checks which we can't
rely on with plain 'if' conditions.
Signed-off-by: Shi Lei <shilei.massclouds@gmx.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently, the functions return a pointer to the
destination buffer on success or NULL on failure.
Not only does this kind of error handling look quite
alien in the context of libvirt, where most functions
return zero on success and a negative int on failure,
but it's also somewhat pointless because unless there's
been a failure the returned pointer will be the same
one passed in by the user, thus offering no additional
value.
Change the functions so that they return an int
instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This convenience macro was created for the simple cases
where the length of the source string and the size of the
destination buffer can be figued out with strlen() and
sizeof() respectively, so we should use it wherever
possible instead of open-coding parts of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This adds some generic virinterfaceobj code, roughly matching what
is used by other stateful drivers like network, storage, etc.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU 2.12 introduced a new type of display for mediated devices using
vfio-pci backend which allows a mediated device to be used as a VGA
compatible device as an alternative to an emulated video device. QEMU
exposes this feature via a vfio device property 'display' with supported
values 'on/off/auto' (libvirt will default to 'off').
This patch adds the necessary bits to domain config handling in order to
expose this feature. Since there's no convenient way for libvirt to come
up with usable defaults for the display setting, simply because libvirt
is not able to figure out which of the display implementations - dma-buf
which requires OpenGL support vs vfio regions which doesn't need OpenGL
(works with OpenGL enabled too) - the underlying mdev uses.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The exit path is the same for both success and failure, so the label
should be called cleanup.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A simple helper which will loop through all the graphics elements and
checks whether at least one of them enables OpenGL support, either by
containing <gl enable='yes'/> or being of type 'egl-headless'.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add a 'skipUpdateCaps' bool that we set for test_driver.c nodedevs
which will skip accessing host resources via virNodeDeviceUpdateCaps
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
If there are managed reservations for a disk source, the path to
the pr-helper socket is generated automatically by libvirt when
needed and points somewhere under priv->libDir. Therefore it is
very unlikely that the path will work even on migration
destination (the libDir is derived from domain short name and its
ID).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There wasn't an explicit type case to the video type enum in
qemuDomainDeviceDefValidateVideo, _TYPE_GOP was also missing from the
switch.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move the video post parse bits into a separate helper as the logic is
going to be extended in the future.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Future patches rely on the ability to reset the contents of the
virDomainVideoDef structure rather than re-allocating it.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It's pointless to check the same thing multiple times.
Fix the indentation along the way too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This function is called from various clean up paths (e.g.
from qemuBuildInterfaceCommandLine). However, depending on the
stage the interface creation process failed at, net->ifname might
still be not filled in when control jumps to cleanup label. If
that is the case return early (avoiding useless error message
produced in virNWFilterBindingLookupByPortDev) as there is no
NWFilter to tear down anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If the code jump to the cleanup before assigning value to @xml
libvirtd may crash when it tries to free an uninitialized pointer.
backtrace:
0 0x00007ffff428d59c in free () from /lib64/libc.so.6
1 0x00007ffff721314a in virFree (ptrptr=ptrptr@entry=0x7fffc67f1b00) at util/viralloc.c:582
2 0x00007ffff7345ac4 in virDomainConfNWFilterInstantiate (vmname=<optimized out>,
vmuuid=vmuuid@entry=0x7fffc0181ca8 "߉\237\\۔H\262\206z\340\302f\265\233z", net=<optimized out>,
ignoreExists=ignoreExists@entry=true) at conf/domain_nwfilter.c:122
3 0x00007fffca5a77f6 in qemuProcessFiltersInstantiate (ignoreExists=true, def=0x7fffc0181ca0) at qemu/qemu_process.c:3028
4 qemuProcessReconnect (opaque=<optimized out>) at qemu/qemu_process.c:7653
5 0x00007ffff72c4895 in virThreadHelper (data=<optimized out>) at util/virthread.c:206
6 0x00007ffff45dcdd5 in start_thread () from /lib64/libpthread.so.0
7 0x00007ffff4305ead in clone () from /lib64/libc.so.6
Signed-off-by: Luyao Huang <lhuang@redhat.com>
SetCreate, SetAddControllers, Reserve
last uses of these functions outside domain_addr.c removed in commit:
40c284f0a6
Assign
never used outside domain_addr.c
move Assign and Reserve above their first call within domain_addr.c
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Allocate, Validate, SetCreate
last uses of these functions outside domain_addr.c removed in commit:
7bdd06b4e1
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
from src/qemu/qemu_domain_address.c to src/conf/domain_addr.c
and rename to virDomainCCWAddressSetCreateFromDomain
(rename to have Address in full instead of Addr to follow
the naming convention of other virDomainCCWAddress functions)
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1585108
When updating a live device users might pass different alias than
the one the device has. Currently, this is silently ignored which
goes against our behaviour for other parts of the device where we
explicitly allow only certain changes and error out loudly on
anything else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This was lost in c57f3fd2f8. But now we are going to
need it again (except the DETACH action where checking for device
compatibility does not make much sense anyway).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Remove the callbacks that the nwfilter driver registers with the domain
object config layer. Instead make the current helper methods call into
the public API for creating/deleting nwfilter bindings.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the nwfilter driver keeps a list of bindings that it has
created, there is no need for the complex virt driver callbacks. It is
possible to simply iterate of the list of recorded filter bindings.
This means that rebuilding filters no longer has to acquire any locks on
the virDomainObj objects, as they're never touched.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the nwfilter driver does not keep any record of what filter
bindings it has active. This means that when it needs to recreate
filters, it has to rely on triggering callbacks provided by the virt
drivers. This introduces a hash table recording the virNWFilterBinding
objects so the driver has a record of all active filters.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a new struct to act as the manager of a collection of
virNWFilterBindingObjPtr objects.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a new struct to act as the stateful owner of the
virNWFilterBindingDefPtr objects.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a <interface> includes a filter name but the nwfilter driver is not
present we silently do nothing. This is very bad, because an application
that thinks it is protected by malicious guest traffic will in fact be
vulnerable. Reporting an error gives the administrator the ability to
know there is a problem and fix it.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A typical XML representation of the virNWFilterBindingDefPtr struct
looks like this:
<filterbinding>
<owner>
<name>f25arm7</name>
<uuid>12ac8b8c-4f23-4248-ae42-fdcd50c400fd</uuid>
</owner>
<portdev name='vnet1'/>
<mac address='52:54:00:9d:81:b1'/>
<filterref filter='clean-traffic'>
<parameter name='MAC' value='52:54:00:9d:81:b1'/>
</filterref>
</filterbinding>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There's no code sharing between virNWFilterDef and
virNWFilterBindingDefPtr types, so it is clearer if they live in
separate source files and headers.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The nwfilter_params.h header references the xmlNodePtr type, so must
include the virxml.h header to get the libxml2 types defined.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We are going to want to expose the NWFilter binding concept in the
public API, so the virNWFilterBindingPtr type needs to be used there.
Our internal type will shortly gain an XML representation, so rename
it to virNWFilterBindingDefPtr which follows our normal conventions.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This doesn't seem very useful at the moment, but it will make
sense once we introduce another HPT-related setting.
The output XML is decoupled from the input XML in preparation
of future changes as well; while doing so, we can shave a few
lines off the latter.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're going to introduce a second HPT-related setting soon,
at which point using a single location to store everything is
no longer going to cut it.
This mostly, but not completely, reverts 3dd1eb3b26.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The last usages were removed with the xend driver in 1dac5fbbbb
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Commit aad3a0b5f altered virObjectEventStateQueueRemote to move
the "if (!event) return" call added in the previous commit 031eb8f6
to virObjectEventStateQueue. Neither commit altered the function
prototype which used ATTRIBUTE_NONNULL(2).
This caused Coverity build problems. Since @event is now checked,
just remove the ATTRIBUTE_NONNULL check from both prototypes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We only formatted the <sev> element when QEMU supported the feature when
in fact we should always format the element to make clear that libvirt
knows about the feature and the fact whether it is or isn't supported
depends on QEMU version, in other words if QEMU doesn't support the
feature we're going to format the following into the domain capabilities
XML:
<sev supported='no'/>
This patch also adjusts the RNG schema accordingly in order to reflect
the proposed change.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some identifiers use Sev, some SEV. Prefer the latter.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, this function changes node for relative XPaths but
doesn't restore the original one in case VIR_ALLOC(def) fails.
Secondly, @type is leaked. Thirdly, dh-cert and session
attributes are strdup()-ed needlessly, virXPathString already
does that so we can use the retval immediately.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adjust the documentation, parser and tests to change:
launch-security -> launchSecurity
reduced-phys-bits -> reducedPhysBits
dh-cert -> dhCert
Also fix the headline in formatdomain.html to be more generic,
and some leftover closing elements in the documentation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We have enough elements using underscores instead of camelCase,
do not bring dashes into the mix.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The typedefs were present twice in the header file which causes failures
with some compilers, eg FreeBSD 10 CLang:
../../src/conf/domain_conf.h:2330:33: error: redefinition of typedef 'virDomainSevDef' is a C11 feature
+[-Werror,-Wtypedef-redefinition]
typedef struct _virDomainSevDef virDomainSevDef;
^
../../src/conf/domain_conf.h:145:33: note: previous definition is here
typedef struct _virDomainSevDef virDomainSevDef;
^
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Formatting of 'driver' already used a separate buffer but was part of
the main function. Separate it and remove bunch of unnecessary temporary
variables.
Note that some checks are removed but they are not really necessary
anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract and refactor the code to use the new approach which allows to
delete a monster condition to check if the element needs to be
formatted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The launch-security element can be used to define the security
model to use when launching a domain. Currently we support 'sev'.
When 'sev' is used, the VM will be launched with AMD SEV feature enabled.
SEV feature supports running encrypted VM under the control of KVM.
Encrypted VMs have their pages (code and data) secured such that only the
guest itself has access to the unencrypted version. Each encrypted VM is
associated with a unique encryption key; if its data is accessed to a
different entity using a different key the encrypted guests data will be
incorrectly decrypted, leading to unintelligible data.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extend hypervisor capabilities to include sev feature. When available,
hypervisor supports launching an encrypted VM on AMD platform. The
sev feature tag provides additional details like Platform Diffie-Hellman
(PDH) key and certificate chain which can be used by the guest owner to
establish a cryptographic session with the SEV firmware to negotiate
keys used for attestation or to provide secret during launch.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU version >= 2.12 provides support for launching an encrypted VMs on
AMD x86 platform using Secure Encrypted Virtualization (SEV) feature.
This patch adds support to query the SEV capability from the qemu.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit id 1bd5a08d added a call to virXMLFormatElement without
also checking the return status.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Katerina Koukiou <kkoukiou@redhat.com>
It will be used in that file later on, plus it makes sense for all the
implementations to be in same place. Also comment each one of them nicely and
add a comment explaining why they all need to end with the same _LAST value.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to have virResctrlGetInfo() when it must be called after
virResctrlInfoNew() anyway, otherwise it's just an unusable object. When we
wrap the logic inside the New() function we'll save some calls later as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
TSEG (Top of Memory Segment) is one of many regions that SMM (System Management
Mode) can occupy. This one, however is special, because a) most of the SMM code
lives in TSEG nowadays and b) QEMU just (well, some time ago) added support for
so called 'extended' TSEG. The difference to the TSEG implemented in real q35's
MCH (Memory Controller Hub) is that it can offer one extra size to the guest OS
apart from the standard TSEG's 1, 2, and 8 MiB and that size can be selected in
1 MiB increments. Maximum may vary based on QEMU and is way too big, so we
don't need to check for the maximum here. Similarly to the memory size we'll
leave it to the hypervisor to try satisfying that and giving us an error message
in case it is not possible.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using an enum in a struct field, the compiler is free to decide to
make it an unsigned type if it desires. This in turn leads to bugs when
code does
if ((def->foo = virDomainFooTypeFromString(str)) < 0)
...
because 'def->foo' can't technically have an unsigned value from the
compiler's POV. While it is possible to add (int) casts in the code
example above, this is not desirable because it is easy to miss out
such casts. eg the code fixed here caused an error with clang builds
../../src/conf/domain_conf.c:12838:73: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
if ((def->version = virDomainTPMVersionTypeFromString(version)) < 0) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Fix the resrc field for the TPM passthrough case to show tpm.
This fixes the code to follow the documentation.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extend the existing auditing with auditing for the TPM emulator.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
The swtpm process now has --tpm2 as an additional parameter:
system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8 0.0 28364 3868 ? Rs 11:13 13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid
The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only define a TPM 1.2.
Extend the documentation.
Add a test case testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When parsing domain XML the virCapsDomainData lookup is performed
in order to fill in missing def->os.arch and def->os.machine
strings. Well, when doing copy of already existing virDomainDef
we don't want any automagic fill in of defaults (and those two
strings are going to be provided at this point anyway by first
parse of the domain XML).
What is even worse is that we do not look up capabilities for
parsed emulator path rather some generic capabilities for parsed
arch. Therefore, if emulator points to qemu under non-default
path (say $HOME/qemu-system-arm) but there's no such qemu under
the default path (say /usr/bin/qemu-system-arm) the capabilities
lookup fails and creating the copy is denied.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With blockdev support we will need to introspect whether any of the
backing chain members requires PR rather just one of them. Add a helper
and reuse it in virDomainDefHasManagedPR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Always parse the 'tls' source field and let the drivers decide whether
they support it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid the <source> vs. <target> confusion,
change <source auto='no' cid='3'/> to:
<cid auto='no' address='3'/>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This patch fixes the USB input bus check, the bug was introduced by commit 317badb
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There was a missing enum for mdev causing a strange 'unknown device type'
warning when hot-plugging mdev.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1583927
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We need to free return value of virXPathString().
==12962== 37 bytes in 1 blocks are definitely lost in loss record 156 of 331
==12962== at 0x4C2AF0F: malloc (vg_replace_malloc.c:299)
==12962== by 0x91E8439: strdup (in /lib64/libc-2.25.so)
==12962== by 0x5DBD551: virStrdup (virstring.c:977)
==12962== by 0x5DD3E5E: virXPathString (virxml.c:84)
==12962== by 0x5E178AB: virDomainDefParseXML (domain_conf.c:19110)
==12962== by 0x5E1E985: virDomainDefParseNode (domain_conf.c:20885)
==12962== by 0x5E1E7CB: virDomainDefParse (domain_conf.c:20827)
==12962== by 0x5E1E871: virDomainDefParseFile (domain_conf.c:20853)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduced by:
commit d4abb7b45d
conf: introduce <vsock> element
commit b8b42ca036
qemu: add support for vhost-vsock-pci
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a new 'vsock' element for the vsock device.
The 'model' attribute is optional.
A <source cid> subelement should be used to specify the guest cid,
or <source auto='yes'/> should be used.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A type to represent the new vsock device.
Also implement an allocation function to allow future addition
of private data.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove the locks since they are unnecessary and would cause
a hang for a driver reload/restart when a transient pool was
previously active as a result of the call:
virStoragePoolUpdateInactive:
...
if (!virStoragePoolObjGetConfigFile(obj)) {
virStoragePoolObjRemove(driver->pools, obj);
...
stack trace:
Thread 17 (Thread 0x7fffcc574700 (LWP 12465)):
...pthread_rwlock_wrlock
...virRWLockWrite
...virObjectRWLockWrite
...virStoragePoolObjRemove
...virStoragePoolUpdateInactive
...storagePoolUpdateStateCallback
...virStoragePoolObjListForEachCb
...virHashForEach
...virStoragePoolObjListForEach
...storagePoolUpdateAllState
...storageStateInitialize
...virStateInitialize
...daemonRunStateInit
...virThreadHelper
...start_thread
...clone
Introduced by commit id 4b2e0ed6e3.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The status XML parser function virDomainObjParseXML could not pass in
parseOpaque into the post parse callbacks. Add a callback which will
allow hypervisor drivers to fill it from the 'virDomainObj' data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When parsing status XML the post-parse callbacks can't access any
private data present in the status XML as the private bits were parsed
after invoking post-parse callbacks.
Move the invocation so that everything is parsed first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
