Turn the final part of Begin phase formatting a domain XML for migration
into a reusable helper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When libvirt daemon is restarted during an active post-copy migration,
we do not always mark the migration as broken. In this phase libvirt is
not really needed for migration to finish successfully. In fact the
migration could have even finished while libvirt was not running or it
may still be happily running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We want to use query-migrate QMP command to check the current migration
state when reconnecting to active domains, but the reply we get to this
command may not contain any statistics at all if called on the
destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
So far migration could only be completed while a migration API was
running and waiting for the migration to finish. In case such API could
not be called (the connection that initiated the migration is broken)
the migration would just be aborted or left in a "don't know what to do"
state. But this will change soon and we will be able to successfully
complete such migration once we get the corresponding event from QEMU.
This is specific to post-copy migration when vCPUs are already running
on the destination and we're only waiting for all memory pages to be
transferred. Such post-copy migration (which no-one is actively
watching) is called unattended migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When reconnecting to an active domain we need to use a different job
structure than the one referenced from the VM object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Normally migrationPort is released in the Finish phase, but we need to
make sure it is properly released also in case qemuMigrationDstFinish is
not called at all. Currently the only callback which is called in this
situation qemuMigrationDstPrepareCleanup which already releases
migrationPort. This patch adds similar handling to additional callbacks
which will be used in the future.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
By separating it into a dedicated qemuMigrationSrcComplete function
which can be later called in other places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function which started a migration phase should also finish it by
calling qemuMigrationJobFinish/qemuMigrationJobContinue so that the code
is easier to follow.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Refactors qemuMigrationDstFinish by moving some parts to a dedicated
function for easier introduction of postcopy resume code without
duplicating common parts of the Finish phase. The goal is to have the
following call graph:
- qemuMigrationDstFinish
- qemuMigrationDstFinishOffline
- qemuMigrationDstFinishActive
- qemuMigrationDstFinishFresh
- qemuMigrationDstFinishResume
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To keep all cookie handling (parsing and formatting) in the same
function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Refactors qemuMigrationDstFinish by moving some parts to a dedicated
function for easier introduction of postcopy resume code without
duplicating common parts of the Finish phase. The goal is to have the
following call graph:
- qemuMigrationDstFinish
- qemuMigrationDstFinishOffline
- qemuMigrationDstFinishActive
- qemuMigrationDstFinishFresh
- qemuMigrationDstFinishResume
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Refactors qemuMigrationDstFinish by moving some parts to a dedicated
function for easier introduction of postcopy resume code without
duplicating common parts of the Finish phase. The goal is to have the
following call graph:
- qemuMigrationDstFinish
- qemuMigrationDstFinishOffline
- qemuMigrationDstFinishActive
- qemuMigrationDstFinishFresh
- qemuMigrationDstFinishResume
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We want to prevent our error path that can potentially kill the domain
on the destination host from overwriting an error reported earlier, but
we were only doing so in one specific path when starting vCPUs fails.
Let's do it in all paths.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The comment about QEMU < 0.10.6 has been irrelevant for years.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By separating it into a dedicated qemuMigrationDstComplete function
which can be later called in other places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The final part of Finish phase will be refactored into a dedicated
function and we don't want to generate the cookie there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Let's call it "error" so that it's clear the label is only used in
failure path.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Most of the code in "endjob" label is executed only on failure. Let's
duplicate the rest so that the label can be used only in error path
making the success path easier to follow and refactor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Code executed only when dom != NULL can be moved before "endjob" label,
to the only place where dom is set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We don't need the object until we get to the "endjob" label.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When connection breaks during post-copy migration, QEMU enters
'postcopy-paused' state. We need to handle this state and make the
situation visible to upper layers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Even though a migration is paused, we still want to see the amount of
data transferred so far and that the migration is indeed not progressing
any further.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Migration is a job which takes some time and if it succeeds, there's
nothing to call another migration on. If a migration fails, it might
make sense to rerun it with different arguments, but this would only be
done once the first migration fails rather than while it is still
running.
If this was not enough, the migration job now stays active even if
post-copy migration fails and anyone possibly retrying the migration
would be waiting for the job timeout just to get a suboptimal error
message.
So let's special case getting a migration job when another one is
already active.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Jobs that are supposed to remain active even when libvirt daemon
restarts were reported as started at the time the daemon was restarted.
This is not very helpful, we should restore the original timestamp.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since we keep the migration job active when post-copy migration fails,
we need to restore it when reconnecting to running domains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When migration fails after it already switched to post-copy phase on the
source, but early enough that we haven't called Finish on the
destination yet, we know the vCPUs were not started on the destination
and the source host still has a complete state of the domain. Thus we
can just ignore the fact post-copy phase started and normally abort the
migration and resume vCPUs on the source.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When post-copy migration fails, we can't just abort the migration and
resume the domain on the source host as it is already running on the
destination host and no host has a complete state of the domain memory.
Instead of the current approach of just marking the domain on both ends
as paused/running with a post-copy failed sub state, we will keep the
migration job active (even though the migration API will return failure)
so that the state is more visible and we can better control what APIs
can be called on the domains and even allow for resuming the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The code for setting up a previously active backup job in
qemuProcessRecoverJob is generalized into a dedicated function so that
it can be later reused in other places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It is used for saving job out of domain object. Just like
virErrorPreserveLast is used for errors. Let's make the naming
consistent as Restore would suggest different semantics.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function can be used as a callback for qemuDomainCleanupAdd to
automatically clean up a migration job when a domain is destroyed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function never returns anything but zero.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The events would normally be triggered only if we're changing domain
state. But most of the time the domain is already in the right state and
we're just changing its substate from {PAUSED,RUNNING}_POSTCOPY to
*_POSTCOPY_FAILED. Let's emit lifecycle events explicitly when post-copy
migration fails to make the failure visible without polling.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There's no need to artificially pause a domain when post-copy fails
from our point of view unless QEMU connection is broken too as migration
may still be progressing well.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This new "post-copy failed" reason for the running state will be used on
the destination host when post-copy migration fails while the domain is
already running there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Notable changes:
- Icelake-Client cpu model family removed:
"Icelake-Client-noTSX-x86_64-cpu"
"Icelake-Client-v1-x86_64-cpu"
"Icelake-Client-v2-x86_64-cpu"
"Icelake-Client-v3-x86_64-cpu"
"Icelake-Client-x86_64-cpu"
- 'zero-copy-send' migration feature added
- display 'sdl' qapified
- 'arch-lbr' cpu feature added
- new HyperV enlightenments:
'hv-tlbflush-ext'
'hv-tlbflush-direct'
'hv-emsr-bitmap'
'hv-xmm-input'
- 'none-machine' has two new properties:
- "boot" described as "Boot configuration"
- "memory" described as "Memory size configuration"
- 'igd-passthrough-isa-bridge' is now Xen-only
- CXL: Compute eXpress Link related devices:
"CXL"
"cxl-rp",
"cxl-type3",
"pxb-cxl",
"pxb-cxl-bus",
"pxb-cxl-host",
- 'dma-translation' feature of 'intel-iommu'
- 'vmcb-clean' cpu feature now migratable:
- possibly due to host kernel upgrade
- changes commandline generated for the 'cpu-host-model' case of
qemuxml2argvtest
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
