According to a9fe9569ab, the <acpi index='NNN'/> is only for PCI
devices. Remove the ref acpi from devices channel, smartcard, tpm,
redirdev, panic, hub because none of them has PCI address. And add the
ref acpi to iommu device.
Fixes: a9fe9569ab
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch prevents nesting of if conditions and makes the code
cleaner.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch alters members of virDomainObjPrivateJobCallbacks to
make the code more consistent.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainJobObj into hypervisor/ as generalized
virDomainJobObj along with generalized private job callbacks as
virDomainObjPrivateJobCallbacks.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch removes variable 'async', which is used only once, and
replaces it with direct comparison with an enum member.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was not causing any problems because all cases below were empty,
but in order to avoid future misbehavior, add a break to this case.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There's no need to use virBufferAddStr() for literal strings
without any newline character as it's more expensive than
virBufferAddLit().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
When formatting qemuCaps XML, the <cpudata/> element is
misaligned. This is because it contains multiple lines and
virBufferAsprintf() does not expect that. Switch to
virBufferAddStr() which does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The G_GNUC_NO_INLINE macro will eventually be marked as
deprecated [1] and we are recommended to use G_NO_INLINE instead.
Do the switch now, rather than waiting for compile time warning
to occur.
1: 15cd0f0461
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Currently, we require glib-2.56.0 at minimum (because of RHEL-8)
but we use G_GNUC_NO_INLINE which was introduced in 2.58.0. While
we provide an implementation for older versions, where the macro
does not exists, it's a bit more tricky than that. Since we
define GLIB_VERSION_MAX_ALLOWED we would get a compile time error
when trying to use something too new, except for G_GNUC_NO_INLINE
which was intentionally not marked as
GLIB_AVAILABLE_MACRO_IN_2_58. But this is about to change with
glib-2.73.2 (which contains commit [1]).
At the same time, we can't just bump glib and thus we have to
provide an alternative implementation without the version
annotation.
1: a6f8fe071e
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
These wrapper functions were used to adapt the virObjectUnref() function
signature for different callbacks. But in commit 0d184072, the
virObjectUnref() function was changed to return a void instead of a
bool, so these adapters are no longer necessary.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The getters/setters for individual properties of migration
speed/downtime/cache size are unused once we switched to setting them
purely via migration parameters. Remove the unused helpers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'xbzrle-cache-size' parameter was added in qemu-2.11 thus all
supported qemu versions now use the new code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'downtime-limit' field of 'migrate-set-parameters' was introduced in
qemu-2.8, thus all qemu versions supported by libvirt use the new code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'max-bandwidth' field was added as argument of
'migrate-set-parameters' in qemu-2.8, thus all qemu version supported by
libvirt already use the new code path.
This patch assumes the presence and removes the legacy code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is just a glue to the testing article introduced in previous
commits.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's not just strategy the master CI article talks (or will talk in the
future) about.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The article was replaced with a new one in previous commit, so we don't
need this one anymore.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The new article provides more in-depth information on testing options
in libvirt.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we don't have much information on how testing is done in
libvirt and the little we have is scattered among multiple files. This
patch creates a common landing page containing all important bits about
testing in libvirt, providing links to respective sections which
deserve their own articles.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since running our functional test suite in GitLab cannot make use of
the shared resources it makes sense to document the process of adding
own HW to run the custom libvirt executor that powers the integration
suite. This article will likely make even more sense in the future with
GitLab severely cutting down on shared CI resources.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Most importantly, how to get it, how install dependencies and how
to run it.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The dashboard itself simply takes away focus from everything else that
makes sense to have in the CI article, so move it to it's own article
and link it from the main CI article.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently translated at 22.2% (2328 of 10472 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/pl/
Co-authored-by: Piotr Drąg <piotrdrag@gmail.com>
Signed-off-by: Piotr Drąg <piotrdrag@gmail.com>
QEMU offers two attributes for handling reset requests of an USB
host device: guest-reset and guest-resets-all. When combined they
act as follows:
1) guest-reset=false
The guest is not allowed to reset the physical USB device.
2) guest-reset=true,guest-resets-all=false
The guest is allowed to reset the device when it is not yet
initialized (aka no USB bus address assigned). Usually this results
in one guest reset being allowed. This is the default behavior.
3) guest-reset=true,guest-resets-all=true
The guest is allowed to reset the device as it pleases.
Now, there's a clear 1:1 mapping with our representation of
guestReset, so generating cmd line is trivial.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have a capability, validate that the QEMU we are
talking to has everything we need for guestReset.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will need two attributes of usb-host device to set:
guest-reset and guest-resets-all. The former was introduced in
QEMU v4.0.0-rc0~56^2 and the other in v4.2.0-rc1~9^2. Hence,
track the latter only as it's only starting from that commit when
QEMU has both attributes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some USB devices have a buggy firmware that either crashes on
device reset, or make the device unusable in some other way.
Fortunately, QEMU offers a way to skip device reset either
completely, or if device is not initialized yet. Expose this
ability to users under:
<hostdev mode='subsystem' type='usb'>
<source guestReset='off'/>
</hostdev>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
My commit of v6.9.0-rc1~457 was a bit too harsh. While it served
its purpose (adding usb-host.hostdevice capability) it has a side
effect: because I copied reply from qemu-5.1.0 to older .replies
files one might now think that say qemu-3.1.0 supports both
.guest-reset and .guest-resets-all properties. But in fact it
doesn't. There are three problematic properties:
1) guest-reset, introduced in v4.0.0-rc0~56^2
2) guest-resets-all introduced in v4.2.0-rc1~9^2
3) suppress-remote-wake introduced in v5.0.0-rc0~148^2~4
Remove these properties from versions that could not have had
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we have bunch of PCI/USB tests cases for
qemuxml2argvtest and qemuxml2xmltest but all of them run without
any capabilities. This makes is needlessly complicated when
trying to extend them. Switch to DO_TEST_CAPS_LATEST().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix docs illustrating call with an obsolete macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While libvirt solves most of the problem of ensuring compatibility, when
there is incompatibility it can be hard for users to track down the
cause. Everything knows to check the physical CPU model, but there are a
surprisingly large number of other factors influencing compatibility.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our man page already documents that iothreadset has --config
argument. Well, it doesn't really. Normally, I'd just fix the man
page, but with recent work on the API it's possible to tweak
values for inactive XML too. Therefore, implement the --config
argument for the command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was always possible to modify the inactive XML, because
VIR_DOMAIN_AFFECT_CURRENT (= 0) is accepted implicitly. But now
that the logic when changing both config and live XMLs is more
robust we can accept VIR_DOMAIN_AFFECT_CONFIG flag too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are three APIs that allow changing IOThreads:
virDomainAddIOThread()
virDomainDelIOThread()
virDomainSetIOThreadParams()
In case of QEMU driver these are handled by
qemuDomainChgIOThread() which attempts to be versatile enough to
work on both inactive and live domain definitions at the same
time. However, it's a bit clumsy - when a change to live
definition succeeds but fails in inactive definition then there's
no rollback. And somewhat rightfully so - changes to live
definition are in general harder to roll back. Therefore, do what
we do elsewhere (qemuDomainAttachDeviceLiveAndConfig(),
qemuDomainDetachDeviceAliasLiveAndConfig(), ...):
1) do the change to inactive XML first,
2) in fact, do the change to a copy of inactive XML,
3) swap inactive XML and its copy only after everything
succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When formatting IOThreads (in virDomainDefIOThreadsFormat()), we
may only output the number of IOThreads, or the full list of IOThreads too:
<iothreads>4</iothreads>
<iothreadids>
<iothread id='1' thread_pool_max='10'/>
<iothread id='2' thread_pool_min='2' thread_pool_max='10'/>
<iothread id='3'/>
<iothread id='4'/>
</iothreadids>
Now, the deciding factor here is whether those individual
IOThreads were so called 'autofill-ed' or user provided. Well, we
need to take another factor in: if an IOThread has pool size
limit set, then we ought to format the full list.
But how can we get into a situation when a thread is autofilled
(i.e. not provided by user in the XML) and yet it has pool size
limit set? virDomainSetIOThreadParams() is the answer.
Sure, we could also unset the autofill flag whenever a pool size
limit is being set. But this approach allows us to not format
anything if the limits are reset (we don't lose the autofill
information).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <defaultiothread/> element is formatted inside
virDomainDefaultIOThreadDefFormat() which is called only from
virDomainDefIOThreadsFormat() (so that IOThread related stuff is
formatted calling one function). However, when there are no
<iothreadids/> defined (or only autoallocated ones are present),
then the outer formatting function exits early never calling the
<defaultiothread/> formatter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We accept TPM version in the domain XML. However, supported
version depends on the host (swtpm_setup binary) and thus it may
be tricky for users (or mgmt applications) chose a version.
Introduce machinery for reporting supported version in domain
capabilities.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
