Long, long ago before libxl_get_required_shadow_memory() was
made publicly available, its code was copied to the libxl driver
for calculating shadow memory requirements of HVM domains.
Long ago, libxl_get_required_shadow_memory() was exported in
libxl_utils.h and included in xen-devel packages everywhere.
Remove the copied code, which has become stale, and let libxl
provode a proper shadow memory value.
Commit id '44304c6eb' added the API libxlDomainAttachControllerDevice
inside a conditional LIBXL_HAVE_PVUSB, but called that function outside
the conditional in libxlDomainAttachDeviceLive.
Similarly, the API libxlDomainDetachControllerDevice was added inside a
conditional LIBXL_HAVE_PVUSB, but called outside the conditional in
libxlDomainDetachDeviceLive.
This patch adds the conditional LIBXL_HAVE_PVUSB around those two calls
from within the switch.
In case of error, libxlReconnectDomain may call
virDomainObjListRemoveLocked. However it has no local reference on
the domain object, leading to segfault. Get a reference to the domain
object at the start of the function and release it at the end to avoid
problems.
This commit also factorizes code between the error and normal ends.
When hotplugging a USB device, check if there is an available controller
and port, if not, automatically create a USB controller of version
2.0 and 8 ports.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Support USB controller hot-plug and hot-unplug.
#virsh attach-device dom usbctrl.xml
#virsh detach-device dom usbctrl.xml
usbctrl.xml example:
<controller type='usb' index='0' model='qusb2'>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
To support USB Controller in xen guest domains, just add
USB controller in domain config xml as following:
<controller type='usb' model='qusb2' ports='4'/>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Introduce initial support for domainBlockStats API call that
allow us to query block device statistics. OpenStack nova
uses this API call to query block statistics, alongside
virDomainMemoryStats and virDomainInterfaceStats. Note that
this patch only introduces it for VBD for starters. QDisk
would come in a separate patch series.
A new statistics data structure is introduced to fit common
statistics among others specific to the underlying block
backends. For the VBD statistics on linux these are exported
via sysfs on the path:
"/sys/bus/xen-backend/devices/vbd-<domid>-<devid>/statistics"
To calculate the block devno libxlDiskPathToID is introduced.
Each backend implements its own function to extract statistics,
allowing support for multiple backends and different platforms.
VBD stats are exposed in reqs and number of sectors from
blkback, and it's up to us to convert it to sector sizes.
The sector size is gathered through xenstore in the device
backend entry "physical-sector-size".
BlockStatsFlags variant is also implemented which has the
added benefit of getting the number of flush requests.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Allow to store driver specific data on a per-vcpu basis.
Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.
Libxl is the last user and I don't have the toolchain prepared to
compile the libxl driver. Move it to the libxl driver to avoid having to
refactor the code.
Move the enum into a new src/util/virsecret.h, rename it to be
virSecretLookupType. Add a src/util/virsecret.h in order to perform
a couple of simple operations on the secret XML and virSecretLookupTypeDef
for clearing and copying.
This includes quite a bit of collateral damage, but the goal is to remove
the "virStorage*" and replace with the virSecretLookupType so that it's
easier to to add new lookups that aren't necessarily storage pool related.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When domXML contains only <console type='pty'> and no corresponding
<serial>, the console is "stolen" [1] and used as the first <serial>
device. When this "stolen" console is accessed from the libxl driver
(in libxlConsoleCallback and libxlDomainOpenConsole), check if the
targetType is VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL, and use the
"stolen" device in def->serials[0] instead. Prior to this change,
creating a domain with input XML containing only a <console> device
and subsequently attempting to access its console with
'virsh console' would fail
error: internal error: character device <null> is not using a PTY
[1] See comments associated with virDomainDefAddConsoleCompat() in
$LIBVIRT-SRC/src/conf/domain_conf.c:
Commit 2a58ed0b added support for creating guests with USB
hostdevs. Commit fc21d10 later added support for hotplut of
USB hostdevs. Advertise support for USB hostdevs in the
domcapabilities.
In addition add the appropriate caps for USB support on
domaincapstest when libvirt is built on a Xen with
LIBXL_HAVE_PVUSB. Otherwise domaincapstest would fail i.e.
testing the wrong domain capabilities.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Support hot attach/detach a USB host device to guest.
Currently libxl only supports xen PV guest, and only
supports specifying USB host device by 'bus number'
and 'device number', for example:
usb.xml:
<hostdev mode='subsystem' type='usb' managed='no'>
<source>
<address bus='1' device='3'/>
</source>
</hostdev>
#xl attach-device dom usb.xml
#xl detach-device dom usb.xml
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Support creating guest with USB host device in config file.
Currently libxl only supports xen PV guest, and only supports
specifying USB host device by 'bus number' and 'device number',
for example:
<hostdev mode='subsystem' type='usb' managed='no'>
<source>
<address bus='1' device='3'/>
</source>
</hostdev>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Populate libxl_domain_build_info struct with bios and firmware
info from virDomainLoaderDef.
Note: Currently libxl only allows specifying the type of BIOS.
For type LIBXL_BIOS_TYPE_OVMF, the firmware path is configured
when building Xen using '--with-system-ovmf='. If not specified,
LIBXL_FIRMWARE_DIR/ovmf.bin is used. In the future, Xen will
support a user-specified firmware path. See
http://lists.xenproject.org/archives/html/xen-devel/2016-03/msg01628.html
Once that work is merged into xen.git, the libvirt libxl driver
will be able to honor a user-specified path. In the meantime use
the implicit path, which is tolerable since it is advertised in
domcapabilities.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Prefer firmwares specified via --with-loader-nvram configure
option. If none are specified, use the Xen-provided default
firmwares found in LIBXL_FIRMWARE_DIR.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In libxl driver we do virObjectRef in libxlDomainObjBeginJob,
If virCondWaitUntil failed, it goes to error, do virObjectUnref,
There's a chance that someone undefine the vm at the same time,
and refs unref to zero, vm is freed in libxlDomainObjBeginJob.
But the vm outside function is not Null, we do virObjectUnlock(vm).
That's how we overwrite the vm memory after it's freed. I fix it.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Similarly to the domain definition validator add a device validator. The
change to the prototype of the domain validator is necessary as
virDomainDeviceInfoIterateInternal requires a non-const pointer.
Until now we weren't able to add checks that would reject configuration
once accepted by the parser. This patch adds a new callback and
infrastructure to add such checks. In this patch all the places where
rejecting a now-invalid configuration wouldn't be a good idea are marked
with a new parser flag.
Remove the live attribute and mark the definition as transient
whether the domain is runing or not.
There were only two callers left calling with live=false:
* testDomainStartState, where the domain already is active
because we assigned vm->def->id just a few lines above the call
* virDomainObjGetPersistentDef, which now only calls
virDomainObjSetDefTransient for an active domain
Add .domainInterfaceAddresses so that user can have a way to
get domain interface address by 'virsh domifaddr'. Currently
it only supports '--source lease'.
Signed-off: Chunyan Liu <cyliu@suse.com>
Xen only supports network-based disks with the qemu (aka qdisk) driver.
Set the driverName to 'qemu' in libxlDomainDeviceDefPostParse() if
not already set. When starting a domain with network-based disks,
ensure the driverName is 'qemu'.
Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=981094
Commit id 'f9edcfa4' added cookie manipulation for libxl; however, some
cookie crumb cleanup was missed. Found by Coverity.
In libxlDomainMigrationBegin, the cookie is allocated and baked; however,
the mig ingredients weren't cleaned up.
In libxlDomainMigrationPrepare, when the 'mig' cookie is added to the
args, set the 'mig = NULL'; otherwise, other failure paths between when
the code ate the cookie data and when it was added to args would fail
to clean up the crumbs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than returning a "char *" indicating perhaps some sized set of
characters that is NUL terminated, alter the function to return 0 or -1
for success/failure and add two parameters to handle returning the
buffer and it's size.
The function no longer encodes the returned secret, rather it returns
the unencoded secret forcing callers to make the necessary adjustments.
Alter the callers to handle the adjusted model.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Call the internal driver callbacks rather than the public APIs to avoid
calling unnecessarily the error dispatching code and don't overwrite
the error messages provided by the APIs. They are good enough to
describe which secret is missing either by UUID or the usage (basically
name).
When probing the <emulator> with '-help' to determine if
it is the old qemu, errors are reported if the emulator
doesn't exist
libvirt: error : internal error: Child process
(/usr/lib/xen/bin/qemu-dm -help) unexpected exit status 127:
libvirt: error : cannot execute binary /usr/lib/xen/bin/qemu-dm:
No such file or directory
Avoid the probe if the specified emulator doesn't exist,
squelching the error. There is no behavior change since
libxlDomainGetEmulatorType() would return
LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN if the probe failed
via virCommandRun().
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Similar to "support Xen migration stream V2 in save/restore",
add support for indicating the migration stream version in
the migration code. To accomplish this, add a minimal migration
cookie in the libxl driver that is passed between source and
destination hosts. Initially, the cookie is only used in
the Begin and Prepare phases of migration to communicate the
version of the migration stream produced by the source.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Xen 4.6 introduced a new migration stream commonly referred to as
"migration V2". Xen 4.6 and newer always produce this new stream,
whereas Xen 4.5 and older always produce the legacy stream.
Support for migration stream V2 can be detected at build time with
LIBXL_HAVE_SRM_V2 from libxl.h. The legacy and V2 streams are not
compatible, but a V2 host can accept and convert a legacy stream.
Commit e7440656 changed the libxl driver to use the lowest libxl
API version possible (version 0x040200) to ensure the driver
builds against older Xen releases. The old 4.2 restore API does
not support specifying a stream version and assumes a legacy
stream, even if the incoming stream is migration V2. Thinking it
has been given a legacy stream, libxl will fail to convert an
incoming stream that is already V2, which causes the entire
restore operation to fail. Xen's libvirt-related OSSTest has been
failing since commit e7440656 landed in libvirt.git master. One
of the more recent failures can be seen here
http://lists.xenproject.org/archives/html/xen-devel/2016-05/msg00071.html
This patch changes the call to libxl_domain_create_restore() to
include the stream version if LIBXL_HAVE_SRM_V2 is defined. The
version field of the libxlSavefileHeader struct is also updated
to '2' when LIBXL_HAVE_SRM_V2 is defined, ensuring the stream
version in the header matches the actual stream version produced
by Xen. Along with bumping the libxl API requirement to 0x040400,
this patch fixes save/restore on a migration V2 Xen host.
Oddly, migration has never used the libxlSavefileHeader. It
handles passing configuration in the Begin and Prepare phases,
and then calls libxl directly to transfer domain state/memory
in the Perform phase. A subsequent patch will add stream
version handling in the Begin and Prepare phase handshaking,
which will fix the migration related OSSTest failures.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In LIBXL_API_VERSION 0x040400, the libxl_domain_create_restore API
gained a parameter for specifying restore parameters. Switch to
using version 0x040400, which will be useful in a subsequent commit
to specify the Xen migration stream version when restoring.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
To ensure the libvirt libxl driver will build with future versions
of Xen where the libxl API may change in incompatible ways,
explicitly use LIBXL_API_VERSION 0x040200. The libxl driver
does use new libxl APIs that have been added since Xen 4.2, but
currently it does not make use of any changes made to existing
APIs such as libxl_domain_create_restore or libxl_set_vcpuaffinity.
The version can be bumped if/when the libxl driver consumes the
changed APIs.
Further details can be found in the following discussion thread
https://www.redhat.com/archives/libvir-list/2016-April/msg00178.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Add codes to support creating domain with network defition of assigning
SRIOV VF from a pool.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
GCC in RHEL-6 complains about listen:
../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow]
/usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow]
This renames all the listen to gListen.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In the latest libxenlight code, libxl_domain_create_restore accepts a
new argument. Update libvirt's libxl driver for that. Use the macro
provided by libxenlight to detect which version should be used.
The new parameter (send_back_fd) is set to -1 because libvirt provides
no such fd.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Message-id: 1459866012-27081-1-git-send-email-wei.liu2@citrix.com
Commit id 'fb2bd208' essentially copied the qemuGetSecretString
creating an libxlGetSecretString. Rather than have multiple copies
of the same code, create src/secret/secret_util.{c,h} files and
place the common function in there.
Modify the the build in order to build the module as a library
which is then pulled in by both the qemu and libxl drivers for
usage from both qemu_command.c and libxl_conf.c
Chunyan sent a nice cleanup patch for libxlDomainDetachNetDevice
https://www.redhat.com/archives/libvir-list/2016-March/msg00926.html
which I incorrectly modified before pushing as commit b5534e53. My
modification caused network devices of type hostdev to no longer
be removed. This patch changes b5534e53 to resemble Chunyan's
original, correct patch.
Chunyan sent a correct patch to fix a resource leak on error in
libxlDomainAttachNetDevice
https://www.redhat.com/archives/libvir-list/2016-March/msg00924.html
I made what was thought to be an improvement and pushed the patch as
commit e6336442. As it turns out, my change broke adding net devices
that are actually hostdevs to the list of nets in virDomainDef. This
patch changes e6336442 to resemble Chunyan's original, correct
patch.
Remove disabling domain death events from libxlDomainStart error
path. The domain death event is already disabled in libxlDomainCleanup.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxlDomainStart allocates and reserves resources that were not
being released in error paths. libxlDomainCleanup already handles
the job of releasing resources, and libxlDomainStart should call
it when encountering a failure.
Change the error handling logic to call libxlDomainCleanup on
failure. This includes acquiring the lease sooner and allowing
it to be released in libxlDomainCleanup on failure, similar to
the way other resources are reclaimed. With the lease now
released in libxlDomainCleanup, the release_dom label can be
renamed to cleanup_dom to better reflect its changed semantics.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commit e6336442 changed the 'out:' label to 'cleanup' in
libxlDomainAttachNetDevice(), but missed a comment referencing
the 'out:' label. Remove it from the comment since it is no
longer accurate anyhow.
For those VF allocated from a network pool, we need to set its backend
to be VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN so that later work can be
correct.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
When hostdev parent is network device, should call
libxlDomainDetachNetDevice to detach the device from a higher level.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
When AttachNetDevice failed, should call networkReleaseActualDevice
to release actual device, and if actual device is hostdev, should
remove the hostdev from vm->def->hostdevs.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Until now, the libxl driver ignored any <hap> setting in domain XML
and deferred to libxl, which enables hap if not specified. While
this is a good default, it prevents disabling hap if desired.
This change allows disabling hap with <hap state='off'/>. hap is
explicitly enabled with <hap/> or <hap state='on/>. Absense of <hap>
retains current behavior of deferring default state to libxl.
Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.
The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.
Original current flag expansion does not filter out non
_CONFIG and _LIVE flags explicitly but they are prohibited
earlier by virCheckFlags.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Flag expansion is the same as in virDomainObjUpdateModificationImpact
which virDomainLiveConfigHelperMethod calls internally. The difference
is merely in implementation. Note that VIR_DOMAIN_MEM_CONFIG is the
same as VIR_DOMAIN_AFFECT_CONFIG. Additionally, the called functions
will properly use flag OR and thus handle the VIR_DOMAIN_MEM_MAXIMUM case.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
libxlDomainPinVcpuFlags calls virDomainLiveConfigHelperMethod which will
call virDomainObjUpdateModificationImpact make the same AFFECT_LIVE flags
and !active check, so remove this duplicated check.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
libxlMakeNic opens a virConnect object and takes a reference on a
virNetwork object, but doesn't drop the references on all error
paths. Rework the function to follow the standard libvirt pattern
of using a local 'ret' variable to hold the function return value,
performing all cleanup and returning 'ret' at a 'cleanup' label.
Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the use of
`virsh domifstat <dom> <interface name>` command plus seeing the
interfaces names instead of "-" when doing `virsh domiflist <dom>`.
After successful guest creation we fill the network interfaces names
based on domain, device id and append suffix if it's emulated in the
following form: vif<domid>.<devid>[-emu]. We extract the network
interfaces info from the libxl_domain_config object in
libxlDomainCreateIfaceNames() to generate ifname. On domain cleanup we
also clear ifname, in case it was set by libvirt (i.e. being prefixed
with "vif"). We also skip these two steps in case the name of the
interface was manually inserted by the administrator. Since the
introduction of netprefix (commit a040ba9), ifnames with a registered
prefix will be freed on virDomain{Obj,Def}Format*, thus eliminating
the migration issues observed with the reverted commit d2e5538 whereas
source and destination would have the same ifname.
For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the
latter is not yet supported in FreeBSD.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
xl/libxl already supports qemu's network-based block backends
such as nbd and rbd. libvirt has supported configuring such
<disk>s for long time too. This patch adds support for rbd
disks in the libxl driver by generating a rbd device URL from
the virDomainDiskDef object. The URL is passed to libxl via the
pdev_path field of libxl_device_disk struct. libxl then passes
the URL to qemu for cosumption by the rbd backend.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch introduces keep alive messages support for P2P migration
and it adds two new configuration entries namely 'keepalive_interval'
'keepalive_count' to control it. Behavior of these entries is the
same as qemu driver thus the description is copied from there
with just a few simplifications.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for VIR_MIGRATE_PEER2PEER in libvirt migration.
Most of the changes occur at the source and no modifications at
the receiver.
In P2P mode there is only the Perform phase so we must handle the
connection with the destination and actually perform the
migration. libxlDomainPerformP2P implements the connection to the
destination and libxlDoMigrateP2P implements the actual migration
logic with virConnectPtr. In this function we take care of doing
all phases of migration in the destination similar to
virDomainMigrateVersion3Full. We appropriately save the last
error reported in each of the phases to provide proper reporting.
We don't yet support VIR_MIGRATE_TUNNELED and we always use V3
with extensible params, thus it also makes the implementation
simpler.
It is worth noting that the receiver didn't have any changes, and
since it's still the v3 sequence thus it is possible to migrate
from a P2P to non-P2P host.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The virDomainObjFormat and virDomainSaveStatus methods
both call into virDomainDefFormat, so should be providing
a non-NULL virCapsPtr instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the newly added virCapabilitiesSetNetPrefix to set
the network prefix for the driver. This in return will
be use by NetDefFormat() and NetDefParseXML() routines
to free any interface name that start with the registered
prefix.
Acked-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
virDomainSaveConfig calls virDomainDefFormat which was setting the caps
to NULL, thus keeping the old behaviour (i.e. not looking at
netprefix). This patch adds the virCapsPtr to the function and allows
the configuration to be saved and skipping interface names that were
registered with virCapabilitiesSetNetPrefix().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
As suggested in a previous thread [0] this patch adds some missing calls
to libxl_dominfo_{init,dispose} when doing some of the libxl_domain_info
operations which would otherwise lead to memory leaks.
[0]
https://www.redhat.com/archives/libvir-list/2015-September/msg00519.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The libxl_device_nic structure supports specifying an outgoing rate
limit based on a time interval and bytes allowed per interval. In xl
config a rate limit is specified as "<RATE>/s@<INTERVAL>". INTERVAL
is optional and defaults to 50ms.
libvirt expresses outgoing limits by average (required), peak, burst,
and floor attributes in units of KB/s. This patch supports the outgoing
bandwidth limit by converting the average KB/s to bytes per interval
based on the same default interval (50ms) used by xl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.
Advantages:
* possible values are well-defined
* typos in driver names will be detected at compile time
* avoids having several copies of the same string around
* no error checking required when setting / getting value
The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Introduces support for domainGetJobStats which has the same
info as domainGetJobInfo but in a slightly different format.
Another difference is that virDomainGetJobStats can also
retrieve info on the most recently completed job. Though so
far this is only used in the source node to know if the
migration has been completed. But because we don't support
completed jobs we will deliver an error.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainGetJobInfo to get info about the
ongoing job. If the job is active it will update the
timeElapsed which is computed with the "started" field added to
struct libxlDomainJobObj. For now we support just the very basic
info and all jobs have VIR_DOMAIN_JOB_UNBOUNDED (i.e. no completion
time estimation) plus timeElapsed computed.
Openstack Kilo uses the Job API to monitor live-migration
progress which is currently nonexistent in libxl driver and
therefore leads to a crash in the nova compute node. Right
now, migration doesn't use jobs in the source node and will
return VIR_DOMAIN_JOB_NONE. Though nova handles this case and
will migrate it properly instead of crashing.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
We should make a copy of current definition to preserve a persistent
definition, because we later update the definition with live changes.
The live definition is discarded on domain shutdown and replaced by the
copy we make before starting the domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit d2e5538b16.
A migration regression was introduced by this commit. When migrating
a domain, its active XML is sent to the destination libvirtd, where
it is parsed as inactive XML. d2e5538b copied the libxl generated
interface name into the active config, which was being passed to the
migration destination and being parsed into inactive config. Attempting
to start the config could result in failure if an interface with the
same generated name already exists.
The qemu driver behaves similarly, but the parser contains a hack to
skip interface names starting with 'vnet' when parsing inactive XML.
We could extend the hack to skip names starting with 'vif' too, but a
better fix would be to expose these hypervisor-specific interface name
prefixes in capabilities. See the following discussion thread for more
details
https://www.redhat.com/archives/libvir-list/2015-December/msg00262.html
For the pending 1.3.0 release, it is best to revert d2e5538b. It can
be added again post release, after moving the prefix to capabilities.
Introduce support for domainInterfaceStats API call for querying
network interface statistics. Consequently it also enables the
use of `virsh domifstat <dom> <interface name>` command plus
seeing the interfaces names instead of "-" when doing
`virsh domiflist <dom>`.
After successful guest creation we fill the network
interfaces names based on domain, device id and append suffix
if it's emulated in the following form: vif<domid>.<devid>[-emu].
We extract the network interfaces info from the libxl_domain_config
object in libxlDomainCreateIfaceNames() to generate ifname. On domain
cleanup we also clear ifname, in case it was set by libvirt (i.e.
being prefixed with "vif"). We also skip these two steps in case the name
of the interface was manually inserted by the adminstrator.
For getting the interface statistics we resort to virNetInterfaceStats
and let libvirt handle the platform specific nits. Note that the latter
is not yet supported in FreeBSD.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6472e54a unlocks the virDomainObj even if libxlDomainObjEndJob
returns false, indicating that its refcnt has dropped to 0.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commits b6e19cf4 and 6472e54a missed unref'ing the
libxlDriverConfig object. Add missing calls to virObjectUnref.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Introduce support for domainMemoryStats API call, which
consequently enables the use of `virsh dommemstat` command to
query for memory statistics of a domain. We support
the following statistics: balloon info, available and currently
in use. swap-in, swap-out, major-faults, minor-faults require
cooperation of the guest and thus currently not supported.
We build on the data returned from libxl_domain_info and deliver
it in the virDomainMemoryStat format.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainGetCPUStats API call and consequently
allow us to use `virsh cpu-stats`. The latter returns a more brief
output than the one provided by`virsh vcpuinfo`.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Since the strtok_r call in libxlCapsInitGuests expects a non NULL first
parameter when the third parameter is NULL, we need to check that
the returned 'capabilities' from a libxl_get_version_info call is
not NULL and error out if so since the code expects it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871452
So, you want to create a domain from XML. The domain already
exists in libvirt's database of domains. It's okay, because name
and UUID matches. However, on domain startup, internal
representation of the domain is overwritten with your XML even
though we claim that the XML you've provided is a transient one.
The bug is to be found across nearly all the drivers.
Le sigh.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After attach-device a <hostdev> with --config, new device doesn't
show up in dumpxml and in guest.
To fix that, set dev->data.hostdev = NULL after work so that the
pointer is not freed, since vmdef has the pointer and still need it.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
libxl/libxl_conf.c: In function 'libxlDriverConfigNew':
libxl/libxl_conf.c:1560:30: error: 'log_level' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
Instead of a hardcoded DEBUG log level, use the overall
daemon log level specified in libvirtd.conf when opening
a log stream with libxl. libxl is very verbose when DEBUG
log level is set, resulting in huge log files that can
potentially fill a disk. Control of libxl verbosity should
be placed in the administrator's hands.
commit 4b53d0d4ac "libxl: don't remove persistent domain on start
failure" cleans up the vm object and sets it to NULL if the vm is not
persistent, however at end job vm (now NULL) is dereferenced via the call to
libxlDomainObjEndJob. Avoid this by skipping "endjob" and going
straight to "cleanup" in this case.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.
The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.
<interface type='udp'>
<mac address='52:54:00:5c:67:56'/>
<source address='127.0.0.1' port='11112'>
<local address='127.0.0.1' port='22222'/>
</source>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>
QEMU call:
-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222
Notice the xml "local" entry becomes the "localaddr" for the qemu call.
reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit f86ae403 moved acquiring a job from libxlDomainStart()
to its callers. One spot missed was in libxlDoMigrateReceive().
Acquire a job in libxlDoMigrateReceive() before calling
libxlDomainStart().
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Failure of libxl_domain_suspend() does not leave the domain in
a suspended state, so no need to call libxl_domain_resume(),
which btw will fail with "domain not suspended".
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch fixes some flawed logic around ref counting the
libxlMigrationDstArgs object.
First, when adding sockets to the event loop with
virNetSocketAddIOCallback(), the generic virObjectFreeCallback()
was registered as a free function, with libxlMigrationDstArgs as
its parameter. A reference was also taken on
libxlMigrationDstArgs for each successful call to
virNetSocketAddIOCallback(). The rational behind this logic was
that the libxlMigrationDstArgs object had to out-live the socket
objects. But virNetSocketAddIOCallback() already takes a
reference on socket objects, ensuring their life until removed
from the event loop and unref'ed in virNetSocketEventFree(). We
only need to ensure libxlMigrationDstArgs lives until
libxlDoMigrateReceive() finishes, which can be done by simply
unref'ing libxlMigrationDstArgs at the end of
libxlDoMigrateReceive().
The second flaw was unref'ing the sockets in the failure path of
libxlMigrateReceive() and at the end of libxlDoMigrateReceive().
As mentioned above, the sockets are already unref'ed by
virNetSocketEventFree() when removed from the event loop.
Attempting to unref the socket a second time resulted in a
libvirtd crash since the socket was previously unref'ed and
disposed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commit 45697fe5 added dom0 to driver->domains, but missed
setting its state to 'running'
$ virsh list
Id Name State
----------------------------------------------------
0 Domain-0 shut off
Set the state of virDomainObj in the functions that
actually change the domain state, instead of the generic
libxlDomainCleanup function. This approach gives functions
calling libxlDomainCleanup more flexibility wrt when and
how they change virDomainObj state via virDomainObjSetState.
The prior approach of calling virDomainObjSetState in
libxlDomainCleanup resulted in the following incorrect
coding pattern in the various functions that change
domain state
libxlDomain<DoStateTransition>
call libxl function to do state transition
emit lifecycle event
libxlDomainCleanup
virDomainObjSetState
Once simple manifestation of this bug is seeing a domain
running in virt-manager after selecting the shutdown button,
even after the domain has long shutdown.
In Xen, dom0 is really just another domain that supports ballooning,
adding/removing devices, changing vcpu configuration, etc. This patch
adds support to the libxl driver for managing dom0. Note that the
legacy xend driver has long supported managing dom0.
Operations that are not supported on dom0 are filtered in libvirt
where a sensible error is reported. Errors from libxl are not
always helpful. E.g., attempting a save on dom0 results in
2015-06-23 15:25:05 MDT libxl: debug: libxl_dom.c:1570:libxl__toolstack_save: domain=0 toolstack data size=8
2015-06-23 15:25:05 MDT libxl: debug: libxl.c:979:do_libxl_domain_suspend: ao 0x7f7e68000b70: inprogress: poller=0x7f7e68000930, flags=i
2015-06-23 15:25:05 MDT libxl-save-helper: debug: starting save: Success
2015-06-23 15:25:05 MDT xc: detail: xc_domain_save_suse: starting save of domid 0
2015-06-23 15:25:05 MDT xc: error: Couldn't map live_shinfo (3 = No such process): Internal error
2015-06-23 15:25:05 MDT xc: detail: Save exit of domid 0 with errno=3
2015-06-23 15:25:05 MDT libxl-save-helper: debug: complete r=1: No such process
2015-06-23 15:25:05 MDT libxl: error: libxl_dom.c:1876:libxl__xc_domain_save_done: saving domain: domain did not respond to suspend request: No such process
2015-06-23 15:25:05 MDT libxl: error: libxl_dom.c:2033:remus_teardown_done: Remus: failed to teardown device for guest with domid 0, rc -8
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
def->vcpus was never updated after successfully changing the live
vcpu count of a domain. Subsequent queries for vcpu info would
return incorrect results. E.g.:
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 4
virsh setvcpus test 2
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 4
After patch, live current config is reported correctly:
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 2
While fixing this, noticed that the live config was not saved
to cfg->stateDir via virDomainSaveStatus. Save the live config
and change error handling of virDomainSave{Config,Status} to
log a message via VIR_WARN, instead of failing the entire
DomainSetVcpusFlags operation.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl driver always uses virDomainObj->def when formatting
the domain XML description. Use virDomainObj->newDef when
--inactive flag is set.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxlDomainCreateXML() would remove a persistent domain if
libxlDomainStart() failed. Check if domain is persistent
before removing.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When restarting libvirtd and reconnecting to running domains,
libxlReconnectDomain() would unconditionally set the domain state
to VIR_DOMAIN_RUNNING, overwriting the state maintained in
$statedir/<domname>.xml. A domain in a paused state would have
the state changed to running, even though it was actually in a
paused state.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Functions like virDomainOpenConsole() and virDomainOpenChannel() accept
NULL as a dev_name parameter. Try using alias for the error message if
dev_name is not specified.
Before:
error: internal error: character device <null> is not using a PTY
After:
error: internal error: character device serial0 is not using a PTY
Signed-off-by: Luyao Huang <lhuang@redhat.com>
If vm->def->cputune.nvcpupin is 0 in libxlDomainSetVcpuAffinities (as
seems to be the case on arm) then the VIR_FREE after cleanup: would be
operating on an uninitialised pointer in map.map.
Fix this by using libxl_bitmap_init and libxl_bitmap_dispose in the
appropriate places (like VIR_FREE, libxl_bitmap_dispose is also
idempotent, so there is no double free on exit from the loop).
libxl_bitmap_dispose is slightly preferable since it also sets
map.size back to 0, avoiding a potential source of confusion.
This fixes the crashes we've been seeing in the Xen automated tests on
ARM.
I had a glance at the handful of other users of libxl_bitmap and none
of them looked to have a similar issue.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
So that they can format private data (e.g., disk private data) stored
elsewhere in the domain object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
By default, getaddrinfo() will return addresses for both
IPv4 and IPv6 if both protocols are enabled, and so the
RPC code will listen/connect to both protocols too. There
may be cases where it is desirable to restrict this to
just one of the two protocols, so add an 'int family'
parameter to all the TCP related APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The vCPU pinning definition gets removed when the domain definition is
being freed later. If there is no next configuration it would remove the
configured pinning.
In the pre-NUMA ages pinning a vCPU to all pCPUs was eaqual to deleting
the pinning info. Now it does not entirely work that way. Pinning a vCPU
to all pCPUs might be a desired operation. Additionally removal of the
pinning will result into using the default pinning information at the
next boot which might be different from all vcpus.
This patch removes the false assumption that we should remove the
pinning after pinning to all vCPUs and tweaks the documentation for
virsh.
A later patch will implement a new flag for the virDomainPinVcpuFlags
API that will allow to remove the pinning in a sane way.
The libxl tries to check if it's running in dom0 by parsing
/proc/xen/capabilities and if that fails it doesn't load.
There's no procfs interface in Xen on FreeBSD, so this check always
fails.
In addition to checking procfs, check if /dev/xen/xenstored, that's enough to
check if we're running in dom0 in FreeBSD case.
For HVM domains, vfb info must be populated in the libxl_domain_build_info
struct. Currently this is done in the libxlMakeVfbList function, but IMO
it would be cleaner to populate the build_info vfb in a separate
libxlMakeBuildInfoVfb function. libxlMakeVfbList would then handle only
vfb devices, simiar to the other libxlMake<device>List functions.
A future patch will extend libxlMakeBuildInfoVfb to support SPICE.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Most virDomainDiskIndexByName callers do not care about the index; what
they really want is a disk def pointer.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For some reason a union (_virNodeDevCapData) that had only been
declared inside the toplevel struct virNodeDevCapsDef was being used
as an argument to functions all over the place. Since it was only a
union, the "type" attribute wasn't necessarily sent with it. While
this works, it just seems wrong.
This patch creates a toplevel typedef for virNodeDevCapData and
virNodeDevCapDataPtr, making it a struct that has the type attribute
as a member, along with an anonymous union of everything that used to
be in union _virNodeDevCapData. This way we only have to change the
following:
s/union _virNodeDevCapData */virNodeDevCapDataPtr /
and
s/caps->type/caps->data.type/
This will make me feel less guilty when adding functions that need a
pointer to one of these.
Currently, the libxl driver does not support any security drivers.
When the qemu driver has no security driver configued,
nodeGetSecurityModel succeeds but returns an empty virSecurityModel
object. Do the same in the libxl driver instead of reporting
this function is not supported by the connection driver:
virNodeGetSecurityModel
While implementing support for SPICE, I noticed VNC passwd was
never copied to libxl_device_vfb's vnc.passwd field.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
