The test is currently testing just device update function. However,
chardev hotplug is implemented just for device attach and detach. This
fact means, the test needs to be rewritten (the majority of the code is
still shared). Moreover, we are now able to pass VM among multiple test
runs. So for instance, while we add a device in the first run, we can
remove it in the second run.
<hyperv>
<spinlocks state='off'/>
</hyperv>
results in:
error: XML error: missing HyperV spinlock retry count
Don't require retries when state is off and use virXPathUInt
instead of virXPathString to simplify parsing.
https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19
For s390 the default console target type is virtio. This also requires
that an implicit virtio-serial controller is instantiated.
This testcase verifies that the target type of virtio is correctly set
in the generated XML if no target element was given and that the
corresponding virtio-serial element is generated too.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
As my punishment for the break in 7f15ebc7 (fixed in 752596b5dd) I'm
introducing this test to make sure it won't happen again. Currently,
only test for <graphics/> is supported.
With unknown good reasons, the attribute "bus" of scsi device
address is always set to 0, same for attribute "target". (See
virDomainDiskDefAssignAddress).
Though we might need to change the algorithm to honor "bus"
and "target" too, that's a different issue. The address generator
for scsi host device in this patch just follows the unknown
good reasons, only considering the "controller" and "unit".
It walks through all scsi controllers and their units, to see
if the address $controller:0:0:$unit can be used (if not used
by any disk or scsi host device yet), if found one, it sits on
it, otherwise, it creates a new controller (actually the controller
is implicitly created by someone else), and sits on
$new_controller:0:0:0 instead.
This attribute is going to represent number of queues for
multique vhost network interface. This commit implements XML
extension part of the feature and add one test as well. For now,
we can only do xml2xml test as qemu command line generation code
is not adapted yet.
QEMU might support more values for "-drive discard", so using Bi-state
values (on/off) for it doesn't make sense.
"on" maps to "unmap", "off" maps to "ignore":
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
The reason for it's not exposed for such long time is that the
enums for VirtioEventIdx and CopyOnReadType have same enum values
and Correspondingstrings. This fixes the bug and adds test.
If the <sysinfo> system table 'uuid' field is improperly formatted,
then qemu will fail to start the guest with the error:
virsh start dom
error: Failed to start domain dom
error: internal error process exited while connecting to monitor: Invalid SMBIOS UUID string
This was because the parsing rules were lax with respect to allowing extraneous
spaces and dashes in the provided UUID. As long as there were 32 hexavalues
that matched the UUID for the domain the string was accepted. However startup
failed because the string format wasn't correct. This patch will adjust the
string format so that when it's presented to the driver it's in the expected
format.
Added a test for uuid comparison within sysinfo.
QEMU introduced "discard" option for drive since commit a9384aff53,
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
This patch exposes the support in libvirt.
QEMU supported "discard" for "-drive" since v1.5.0-rc0:
% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1
So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
Adding a VNC WebSocket support for QEMU driver. This functionality is
in upstream qemu from commit described as v1.3.0-982-g7536ee4, so the
capability is being recognized based on QEMU version for now.
QEMU introduced command line "-mem-merge=on|off" (defaults to on) to
enable/disable the memory merge (KSM) at guest startup. This exposes
it by new XML:
<memoryBacking>
<nosharepages/>
</memoryBacking>
The XML tag is same with what we used internally for old RHEL.
Files ending in -invalid.xml are expected to violate the
XML schema check. The RBD file does not so must have a
different filename.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU command line syntax for RBD disks is
file=rbd:pool/image:opt1=val1:opt2=val2...
There is no way to escape the ':' if it appears in the
pool or image name. Thus it must be explicitly forbidden
if it occurs in the libvirt XML. People are known to
be abusing the lack of escaping in current libvirt to
pass arbitrary args to QEMU.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Except the scsi host device's controller is "lsilogic", mapping
between the libvirt attributes and scsi-generic properties is:
libvirt qemu
-----------------------------------------
controller bus ($libvirt_controller.0)
bus channel
target scsi-id
unit lun
For scsi host device with "lsilogic" controller, the mapping is:
('target (libvirt)' must be 0, as it's not used; 'unit (libvirt)
must <= 7).
libvirt qemu
----------------------------------------------------------
controller && bus bus ($libvirt_controller.$libvirt_bus)
unit scsi-id
It's not good to hardcode/hard-check limits of these attributes,
and even worse, these limits are not documented, one has to find
out by either testing or reading the qemu code, I'm looking forward
to qemu expose limits like these one day). For example, exposing
"max_target", "max_lun" for megasas:
static const struct SCSIBusInfo megasas_scsi_info = {
.tcq = true,
.max_target = MFI_MAX_LD,
.max_lun = 255,
.transfer_data = megasas_xfer_complete,
.get_sg_list = megasas_get_sg_list,
.complete = megasas_command_complete,
.cancel = megasas_command_cancel,
};
Example of the qemu command line (lsilogic controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,scsi-id=8,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Example of the qemu command line (virtio-scsi controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
An example of the scsi hostdev XML:
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='0' unit='0'/>
</source>
<address type='drive' controller='0' bus='0' target='4' unit='8'/>
</hostdev>
Controller is implicitly added for scsi hostdev, though the scsi
controller's model defaults to "lsilogic", which might be not what
the user wants (same problem exists for virtio-scsi disk). It's
the existing problem, will be addressed later.
The device address must be specified manually. Later patch will let
libvirt generate it automatically.
This only introduces the generic XMLs for scsi hostdev, later patches
will add other elements, e.g. <readonly>, <shareable>.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
Print an error instead of crashing when a TPM device without
a backend is specified.
Add a test for tpm device with no backend, which should fail
with a parse error.
https://bugzilla.redhat.com/show_bug.cgi?id=961252
For s390 we don't want to have a default USB device generated even
if QEMU is silently tolerating -usb on the command line. This may change
in the future.
Another reason to avoid the USB controller is that it implies a PCI
bus which might cause a regression at some later point in time.
The following change will set the USB controller model to 'none'
unless a model or address has been specified, which can be the case
if a legacy definition is loaded or the XML writer knows what
she/he's doing.
Requiring the user to explicitly disable USB on systems not supporting
it seems cumbersome.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
In the past we automatically added a USB controller and assigned
it a PCI address (0:0:1.2) even on machines without a PCI bus.
This didn't break machines with no PCI bus because the command
line for it is just '-usb', with no mention of the PCI bus.
The implicit IDE controller (reserved address 0:0:1.1) has
no command line at all.
Commit b33eb0dc removed the ability to reserve PCI addresses
on machines without a PCI bus. This made them stop working,
since there would always be the implicit USB controller.
Skip the reservation of addresses for these controllers when
there is no PCI bus, instead of failing.
The device option for vfio-pci is nearly identical to that for
pci-assign - only the configfd parameter isn't supported (or needed).
Checking for presence of the bootindex parameter is done separately
from constructing the commandline, similar to how it is done for
pci-assign.
This patch contains tests to check for proper commandline
construction. It also includes tests for parser-formatter-parser
roundtrips (xml2xml), because those tests use the same data files, and
would have failed had they been included before now.
qemu: xml/args tests for VFIO hostdev and <interface type='hostdev'/>
These should be squashed in with the patch that adds commandline
handling of vfio (they would fail at any earlier time).
When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose). Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.
Add a "dry run" address allocation to figure out how many bridges
will be needed for all the devices without explicit addresses.
Auto-add just enough bridges to put all the devices on, or up to the
bridge with the largest specified index.
<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.
Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.
Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.
Assume format type is 'auto' when none is specified on
qemu command line.
Instead of making a choice between the underscore and camelCase, this
simply changes "num_queues" into "queues", which is also consistent
with Michal's multiple queue support for interface.
Improve error reporting and generating of SPICE command line arguments
according to the need to enable TLS. If TLS is disabled, there's no need
to pass the certificate dir to qemu.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=953126
Currently, -device xxx still doesn't work well for ppc64 platform.
It's better use legacy USB option with default for ppc64.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The recent qemu requires "0x" prefix for the disk wwn, this patch
changes virValidateWWN to allow the prefix, and prepend "0x" if
it's not specified. E.g.
qemu-kvm: -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,\
drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,wwn=6000c60016ea71ad:
Property 'scsi-hd.wwn' doesn't take value '6000c60016ea71ad'
Though it's a qemu regression, but it's nice to allow the prefix,
and doesn't hurt for us to always output "0x".
To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
With this patch, one can specify the disk source using libvirt
storage like:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source pool='default' volume='fc18.img'/>
<target dev='vdb' bus='virtio'/>
</disk>
"seclabels" and "startupPolicy" are not supported for this new
disk type ("volume"). They will be supported in later patches.
docs/formatdomain.html.in:
* Add documents for new XMLs
docs/schemas/domaincommon.rng:
* Add rng for new XMLs;
src/conf/domain_conf.h:
* New struct for 'volume' type disk source (virDomainDiskSourcePoolDef)
* Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType
src/conf/domain_conf.c:
* New helper virDomainDiskSourcePoolDefParse to parse the 'volume'
type disk source.
* New helper virDomainDiskSourcePoolDefFree to free the source def
if 'volume' type disk.
tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
tests/qemuxml2xmltest.c:
* New test
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
Use the qemu specific callback to fill this data in the qemu driver as
it's the only place where it was used and fix tests as the qemu test
capability object didn't configure the defaults for the tests.
