Use the new handler to fetch the required data and do the extraction
locally without conversion to string list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new set hander for getting the data for
'query-command-line-options' which returns everything at once and lets
the caller extract the data. This way we don't need to cache the output
of the monitor command for repeated calls.
Note that we will have enough testing of this code path via
qemucapabilitiestest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Do not look up the index of the passed FD in places where
we already have it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
An alternative to qemuVirCommandGetFDSet that takes the index
into the passed FD set as an argument and does not try to look it up.
Use it as well ass virCommandPassFDIndex in qemuBuildChrChardevFileStr
and qemuBuildInterfaceCommandLine.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a few commit back (v6.10.0-5-gb3dad96972) a new helper for
obtaining string arrays from a virJSONObject was introduced:
virJSONValueObjectGetStringArray(). I've identified three places
where it can be used instead of open coding it:
qemuAgentSSHGetAuthorizedKeys(),
qemuMonitorJSONGetStringListProperty() and
qemuMonitorJSONGetCPUDefinitions().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
cfg->firmwares still points to the original memory address after being
freed by virFirmwareFreeList(). As cfg get freed, it will be freed again
even if cfg->nfirmwares=0 which eventually lead to crash.
The patch fix it by setting cfg->firmwares to NULL explicitly after
virFirmwareFreeList() returns
Signed-off-by: Guoyi Tu<tu.guoyi@h3c.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
guest-get-disks is available since QEMU 5.2:
https://wiki.qemu.org/ChangeLog/5.2#Guest_agent
Note that the test response was manually edited based on a reply on my
bare-metal computer. It shows partial results due to pcieport driver not
being currently supported by QGA.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
There might be more potential users around, I haven't looked thoroughly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
To match the QGA schema name (we are introducing a qemuAgentDiskInfo
struct again for different purpose).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Even though it is technically possible, when running the migrations QEMU's
nbd-server-start errors out with:
"TLS is only supported with IPv4/IPv6"
We can always enable it when QEMU adds this feature, but for now it is safer to
show our error message rather than rely on QEMU to error out properly.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When executing the hypervisor-cpu-baseline command and if there is
only a single CPU definition present in the XML file, then the
baseline handler will exit early and libvirt will print an unhelpful
message:
"error: An error occurred, but the cause is unknown"
This is due to no CPU definition ever being "baselined", since the
handler expects at least two CPU models.
Let's fix this by performing a CPU model expansion on the single CPU
definition and returning the result to the caller. This will also
ensure the CPU model's feature set is sane if any were provided in
the file.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Check the provided CPU models against the CPU models
known by the hypervisor before baselining and print
an error if an unrecognized model is found.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When executing the hypervisor-cpu-baseline command and the
XML file contains a CPU definition without a model name, or
an invalid CPU definition, then the commands will fail and
return an error message from the QMP response.
Let's clean this up by checking for a valid definition and
presence of a model name.
This code is copied from virCPUBaseline.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Hypervisor-cpu-baseline requires the cpu-model-expansion
capability when expanding CPU model features if the
--features flag is provided.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Forgetting to use the VIR_MIGRATE_TLS flag with migration can lead to
leak of sensitive information. Add an administrative knob to force use
of the flag.
Note that without VIR_MIGRATE_PEER2PEER, the migration is driven by an
instance of the client library which doesn't necessarily run on either
of the hosts so the flag can't be used to assume VIR_MIGRATE_TLS even
if it wasn't provided by the user instead of rejecting if it's not.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/67
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu's internals were not prepared for switching to -blockdev for the
legacy storage migration. Add a proper error message since qemu is
unlikely to attempt fixing the old protocol.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/65
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move and aggregate all the logic which is switched based on whether the
migration is tunnelled or not before other checks. Further checks will
be added later.
While the code is being moved the error message is put on a single line
per new coding style.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our streams are not the best transport for migration data and we support
TLS for security now. It's unlikely that there will be enough motivation
to add a new migration protocol to tunnel NBD too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit dealing with snapshots we must rewrite the
metadata of the previously-'current' checkpoint when changing which
checkpoint is considered 'current'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Whether a snapshot definition is considered 'current' or active is
stored in the metadata XML libvirt writes when we create metadata.
This means that if we are changing the 'current' snapshot we must
re-write the metadata of the previously 'current' snapshot to update the
field to prevent having multiple active snapshots.
Unfortunately the snapshot creation code didn't do this properly, which
resulted in the following error:
error : qemuDomainSnapshotLoad:430 : internal error: Too many snapshots claiming to be current for domain snapshot-test
being printed if libvirtd was terminated and restarted.
Introduce qemuSnapshotSetCurrent which writes out the old snapshot's
metadata when updating the current snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases such as when creating an internal inactive snapshot we
know that the domain definition in the snapshot is equivalent to the
current definition. Additionally we set up the current definition for
the snapshotting but not the one contained in the snapshot. Thus in some
cases the caller knows better which def to use.
Make qemuDomainSnapshotForEachQcow2 take the definition by the caller
and copy the logic for selecting the definition to callers where we
don't know for sure that the above claim applies.
This fixes internal inactive snapshots when <disk type='volume'> is used
as we translate the pool/vol combo only in the current def.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/97
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't try to manipulate snapshots on network or unresolved volume backed
storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'continue' the loop if the device is not a disk. Saving the level makes
one of the error messages fit on a single line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The ESP SCSI controllers (NCR53C90, DC390, AM53C974) have the same
requirement as the LSI Logic controller for each disk to be set via
the scsi-id=NNN property, not the lun=NNN property.
Switching the code to use an enum will force authors to pay attention
to this difference when adding future SCSI controllers.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When introducing the API I've mistakenly used 'int' type for
@nkeys argument which does nothing more than tells the API how
many items there are in @keys array. Obviously, negative values
are not expected and therefore 'unsigned int' should have been
used.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
but not sparc64. Note that it has the fixed alias "scsi", which differs
from our normal naming convention of "scsi0".
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Probing for the NCR53C90 controller is a little unusual. The
qom-list-types QMP command returns a list of all types known to
the QEMU binary. It does not distinguish devices which are user
creatable from those which are built-in.
Any QEMU target that supports PCI will have the DC390 / AM53C974
devices because they are PCI based. Due to code dependencies
in QEMU though, existence of these two devices will also pull in
the NCR53C90 device (called just 'esp' in QEMU). The NCR53C90 is
not user-creatable and can only be used when built-in to the
machine type.
This is only the case on sparc machines, and certain mips64 and
m68k machines. IOW, we don't rely on qom-list-types as a guide
for existence of NCR53C90, as it shouldn't really exist in most
QEMU binaries.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
and some mips and m68k machine types.
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
These are only interesting for emulating obsolete hardware platforms.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 ESP SCSI controller is only usable when built-in to the
machine type. This method will facilitate checking that restriction
across many places.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sparc machines have little in common with sparc64 machines.
No sparc machine type includes a PCI bus, so we should not be adding one
to the XML. This further means that we should not be adding a memory
balloon device, nor USB controller as these are both PCI based.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In QEMU 5.2, the guest agent learned to manipulate a user
~/.ssh/authorized_keys. Bind the JSON API to libvirt.
https://wiki.qemu.org/ChangeLog/5.2#Guest_agent
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Similarly to previous commits, we can utilize domCaps to check if
graphics type is supported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
QEMU supports egl-headless if QEMU_CAPS_EGL_HEADLESS capability
is present. There are some additional requirements but those are
checked for in qemuValidateDomainDeviceDefGraphics() and depend
on domain configuration and thus are not representable in domain
capabilities. Let's stick with plain qemuCaps check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In my recent commit of 5216304bfe I've moved RNG model check
from domain capabilities validator into qemu validator. During
that I had to basically duplicate RNG model to qemuCaps checks.
Problem with this approach is that after my commit qemu validator
and domCaps are disconnected and thus domCaps might report (in
general) different set of supported RNG models.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In my recent commit of a33279daa8 I've moved video model check
from domain capabilities validator into qemu validator. During
that I had to basically duplicate video model to qemuCaps checks.
Problem with this approach is that after my commit qemu validator
and domCaps are disconnected and thus domCaps might report (in
general) different set of supported video models.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
QEMU version 4.2 introduced a performance feature under commit
d645e13287 ("kvm: i386: halt poll control MSR support").
This patch adds a new KVM feature 'poll-control' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-poll-control=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description:
<features>
<kvm>
<poll-control state='on'/>
</kvm>
</features>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the domCaps cache is history, this code is no longer
used and thus can be removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently, whenever a domain capabilities is needed (fortunately,
after cleanup done by previous commits it is now only in
virConnectGetDomainCapabilities()), the object is stored in a
cache. But there is no invalidation mechanism for the cache
(except the implicit one - the cache is part of qemuCaps and thus
share its lifetime, but that is not enough). Therefore, if
something changes - for instance new firmware files are
installed, or old are removed these changes are not reflected in
the virConnectGetDomainCapabilities() output.
Originally, the caching was there because domCaps were used
during device XML validation and they were used a lot from our
test suite. But this is no longer the case. And therefore, we
don't need the cache and can construct fresh domCaps on each
virConnectGetDomainCapabilities() call.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1807198
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that nothing uses virDomainCapsDeviceDefValidate() it can be
removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain video model has to be validated in
qemuValidateDomainDeviceDefVideo().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain RNG model has to be validated in
qemuValidateDomainRNGDef().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is a Coverity fix pointed out by John in IRC. This code
was introduced in 19d74fdf0e, when the TPM Proxy device for
for ppc64 was introduced.
This will leak in case we have 2 TPMs in the same domain, a
possible scenario with the protected Ultravisor execution in
PowerPC guests.
Fixes: 19d74fdf0e
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Libvirt's backup code has two modes:
1) push - where qemu actively writes the difference since the checkpoint
into the output file
2) pull - where we instruct qemu to expose a frozen disk state along
with a bitmap of blocks which changed since the checkpoint
For push mode qemu needs the temporary bitmap we use where we calculate
the actual changes to be present on the block node backing the disk.
For pull mode where we expose the bitmap via NBD qemu actually wants the
bitmap to be present for the exported block node which is the scratch
file.
Until now we've calculated the bitmap twice and installed it both to the
scratch file and to the disk node, but we don't need to since we know
when it's needed.
Pass in the 'pull' flag and decide where to install the bitmap according
to it and also when to register the bitmap name with the blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The NBD server used to export pull-mode backups doesn't have any other
form of client authentication on top of the TLS transport, so the only
way to authenticate clients is to verify their certificate.
Enable this option by defauilt when both 'backup_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The migration stream connection and also the NBD server for non-shared
storage migration don't have any other form of client authentication on
top of the TLS transport, so the only way to authenticate clients is to
verify their certificate.
Enable this option by defauilt when both 'migrate_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Chardevs don't have any other form of client authentication on top of
the TLS transport, so the only way to authenticate clients is to verify
their certificate.
Enable this option by defauilt when both 'chardev_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If both "vnc_tls_x509_verify" and "default_tls_x509_verify" are missing
from the config file the client certificate validation is disabled. VNC
provides a layer of authentication so client certificate validation is
not strictly required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Store whether "default_tls_x509_verify" was provided and enhance the
SET_TLS_VERIFY_DEFAULT macro so that indiviual users can provide their
own default if "default_tls_x509_verify" config option was not provided.
For now we keep setting it to 'false'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Typecast the controller type variable to the appropriate type and add
the missing controller types for future extension.
Note that we currently allow only unplug of
VIR_DOMAIN_CONTROLLER_TYPE_SCSI thus the other controller types which
are not implemented return false now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Iterate through hostdevs only when the controller type is
VIR_DOMAIN_CONTROLLER_TYPE_SCSI.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tests which match the disk bus to the controller type were backwards
in this function. This meant that any disk bus type (such as
VIR_DOMAIN_DISK_BUS_SATA) would not skip the controller index comparison
even if the removed controller was of a different type.
Switch the internals to a switch statement with selects the controller
type in the first place and a proper type so that new controller types
are added in the future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1870072
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A bad merge while rebasing 74b2834333 caused the @event variable
to be defined twice, inside the 'cleanup' label, causing coverity
errors.
This code was originally moved outside of the label by commit
773c7c4361. Delete the unintended code in the 'cleanup'
label.
Fixes: 74b2834333
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use g_autoptr() and remove the 'cleanup' label.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use VIR_AUTOCLOSE with 'fd' and delete the 'cleanup' label.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use g_autoptr() to deprecate the 'cleanup' label.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove obsolete 'cleanup' labels after the changes from the
previous patch.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some labels became deprecated after the previous patches.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Due to failures to unlink on previous rename/undefine we can already have
autolink etc files for the domain to be defined. Remove them.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Let's move objlist restoring to cleanup section so that we can handle failure
of actions between virDomainObjListAdd and virDomainDefSave. We are going
to add such actions in next patch.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If domain name is changed since snapshot we need to update it to current in
config taken from snapshot.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is basically just saves checkpoints metadata on disk after name is changed
in memory as path to domain checkpoints directory depends on name. After that
old checkpoint directory is deleted with checkpoint metadata files.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is basically just saves snapshots metadata on disk after name is changed
in memory as path to domain snapshot directory depends on name. After that
old snapshot directory is deleted with snapshot metadata files.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch also changes functionality a bit.
First if unlinking of old config file is failed we rollback and return error
previously and now we return success. I don't think this makes much difference.
I guess in both cases on libvirtd restart we have to deal with both new and old
config existing on disk with different names but same uuid.
Second if unlinking of old autolink is failed we rollback previously which
was not right as at this point we already unlink old config file. So this
is fixed now.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Going to cleanup label is mere return -1 thus let's just return
instead of goto to this label.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can simplify cleanup section by moving sending events to success path only
because only on sucess path events are not NULL.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For example if saving config file with new name fails we send false undefine
event currently.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some CPUs provide a way to read exact TSC frequency, while measuring it
is required on other CPUs. However, measuring is never exact and the
result may slightly differ across reboots. For this reason both Linux
kernel and QEMU recently started allowing for guests TSC frequency to
fall into +/- 250 ppm tolerance interval around the host TSC frequency.
Let's do the same to avoid unnecessary failures (esp. during migration)
in case the host frequency does not exactly match the frequency
configured in a domain XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1839095
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two types of vhostuser ports:
dpdkvhostuser - OVS creates the socket and QEMU connects to it
dpdkvhostuserclient - QEMU creates the socket and OVS connects to it
But of course ovs-vsctl syntax for fetching ifname is different.
So far, we've implemented the former. The lack of implementation
for the latter means that we are not detecting the interface name
and thus not reporting it in domain XML, or failing to get
interface statistics.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Although the code in qemuProcessStartValidateTSC works as if the
timer frequency was already unsigned long long (by using an appropriate
temporary variable), the virDomainTimerDef structure actually defines
frequency as unsigned long, which is not guaranteed to be 64b.
Fixes support for frequencies higher than 2^32 - 1 on 32b systems.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
A qemu guest which has virtiofs config fails to start if the previous
starting failed because of invalid option or something.
That's because the virtiofsd isn't killed by virPidFileForceCleanupPath()
on the former failure because the pidfile was already removed by
virFileDeleteTree(priv->libDir) in qemuProcessStop(), so
virPidFileForceCleanupPath() just returned.
Move qemuExtDevicesStop() before virFileDeleteTree(priv->libDir) so that
virPidFileForceCleanupPath() can kill virtiofsd correctly.
For example of the reproduction:
# virsh start guest
error: Failed to start domain guest
error: internal error: process exited while connecting to monitor: qemu-system-x86_64: -foo: invalid option
... fix the option ...
# virsh start guest
error: Failed to start domain guest
error: Cannot open log file: '/var/log/libvirt/qemu/guest-fs0-virtiofsd.log': Device or resource busy
#
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function only returns zero or aborts, so it might as well be void.
This has the added benefit of simplifying the code that calls it.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When using .path() for an argument to a python script meson will not
setup dependancies on the file. This means that changes to the generator
script will not trigger a rebiuld
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The enum constant names should all have a prefix that matches the enum
name. VIR_DOMAIN_CHECKPOINT_REDEFINE_VALIDATE was missing the "CREATE_"
part of the name prefix.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Verify that the checkpoint requested by an incremental backup exists.
Unfortunately validating whether the checkpoint configuration actually
matches the disk may not be reasonably feasible as the disk may have
been renamed/snapshotted/etc. We still rely on bitmap presence.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Validate that the bitmaps are present when redefining a checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
First one prepares and validates the definition, the second one actually
either updates an existing checkpoint or assigns definition for the new
one.
This will allow driver code to add extra validation between those
steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we don't have a consistent chain of bitmaps for the backup to proceed
we'd report VIR_ERR_INVALID_ARG error code, which makes it hard to
decide whether an incremental backup makes even sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In testing code we don't properly populate the job sometimes. If it
isn't populated we should not touch it though in the migration cookie
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Include qemu_domain.h and qemu_domainjob.h as the types from those
headers are used by this header.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuMigrationSrcCleanup uses qemuDomainObjDiscardAsyncJob currently. But
discard does not reduce jobs_queued counter so it leaks. Also discard does not
notify other threads that job condition is available. Discard does reset nested
job but nested job is not possible in this conditions.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The simplest way to write tests is to check the output against expected
output, but we must ensure that the output is stable. We can use
virHashForEachSorted as a hash iterator to ensure stable ordering.
This patch fixes 3 instances of hash iteration which is tested in
various parts, including test output changes in appropriate places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
All but one of the callers either use the list in arbitrary order or
sorted by key. Rewrite the function so that it supports sorting by key
natively and make it return the element count. This in turn allows to
rewrite the only caller to sort by value internally.
This allows to remove multiple sorting functions which were sorting by
key and the function will be also later reused for some hash operations
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The remember owner feature uses XATTRs to store original
seclabels. But that means we don't want a regular user to be able
to change what we stored and thus trick us into setting different
seclabel. Therefore, we use namespaces that are reserved to
CAP_SYS_ADMIN only. Such namespaces exist on Linux and FreeBSD.
That also means, that the whole feature is enabled only for
qemu:///system. Now, while the secdriver code is capable of
dealing with XATTRs being unsupported (it has to, not all
filesystems support them) if the feature is enabled users will
get an harmless error message in the logs and the feature
disables itself.
Since we have virSecurityXATTRNamespaceDefined() we can use it to
make a wiser decision on the default state of the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add logic to validate and then pass through 'fmode' and 'dmode' to the
QEMU call.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The QEMU 9pfs 'fmode' and 'dmode' options have existed since QEMU 2.10.
Probe QEMU's command line set to check whether these options are
available, and if yes, enable this new QEMU_CAPS_FSDEV_CREATEMODE
capability on libvirt side.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
All other helper processes are moved to cgroup with QEMU emulator
thread as we keep the root VM cgroup without any processes. This
assumption is validated in qemuRestoreCgroupState() which is called
when libvirtd is restarted and reconnected to all running VMs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In both cases priv->cgroup will always be NULL because it is called
before the QEMU process is started and cgroups are configured.
In qemuProcessLaunch() the call order is following:
qemuExtDevicesStart()
...
virCommandRun()
...
qemuSetupCgroup()
where qemuDBusStart() is called from qemuExtDevicesStart() but we
cgroups are created in qemuSetupCgroup().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After converting all DIR* to g_autoptr(DIR), many cleanup: labels
ended up just having "return ret", and every place that set ret would
just immediately goto cleanup. Remove the cleanup label and its
return, and just return the set value immediately, thus eliminating
the need for the return variable itself.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will make it easier to review upcoming patches that use g_autoptr
to auto-close all DIRs.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that qemu stabilized it's interface and we've switched to the new
design we can re-enable use of 'block-export-add'
This reverts commit b87cfc957f
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu decided to modify the arguments of 'block-export-add' to include an
array of bitmaps rather than a single bitmap.
Since we've added the code prior to qemu setting the interface in stone
and thus it will be changed incompatibly and we already have tests for
the new interface we need to update the code and qemu capabilities data
at the same time.
Use a array of bitmaps as the 'bitmaps' argument instead of 'bitmap' and
bump qemu capabilities for the upcoming 5.2.0 release to
v5.1.0-2827-g2c6605389c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We use the capability to switch to using 'block-export-add' in the
upcoming qemu release instead of the at the same time deprecated
'nbd-server-add'.
Unfortunately qemu wants to change the interface of 'block-export-add'
before the release. Since we've tried to stay up to date and added the
code before it was written in stone, we need to disable the use of the
new interface for the upcoming libvirt release so that we don't have a
version of libvirt which would not work with the upcoming qemu version.
Remove the detection of 'block-export-add' until we are more sure how
the qemu interface will look.
This patch partially reverts commit adb9f7123a
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Currently all errors from qemuInterfacePrepareSlirp() are completely
ignored by the callers. The intention is that missing qemu-slirp binary
should cause the caller to fallback to the built-in slirp impl.
Many of the possible errors though should indeed be considered fatal.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Eliminate cleanup code by using g_autofree.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In recent commit v6.8.0-135-g518be41aaa the formatting of NBD
into migration cookie was moved into a separate function and with
it it was switched from direct printing into the output buffer to
virXMLFormatElement(). But there was a typo. The
virXMLFormatElement() accepts two buffers on input, one for
element attributes and another for child elements. Well, the line
that was supposed to add NBD port into the attributes buffer
printed the attribute directly into the output buffer which
produced this mangled XML:
<qemu-migration>
port='49153'<nbd>
<disk target='vda' capacity='8589934592'/>
<disk target='vdb' capacity='12746752000'/>
</nbd>
</qemu-migration>
Changing the incriminated line to print into the attributes
buffer fixes the problem.
Fixes: 518be41aaa
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In one of recent patches the way that we start NBD server for
incoming migration was reworked (v6.8.0-rc1~298). A new boolean
was introduced that tracks whether the NBD server was started so
that we don't start it twice nor record in the port in the port
allocator twice. Well, this idea is good, but in the
implementation the boolean is never set, so we are reserving the
port twice and would be starting the NBD server twice too if it
wasn't for port reservation fail.
Fixes: e74d627bb3
Reported-by: Vjaceslavs Klimovs <vklimovs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In qemuDomainLogContextNew() the domain log file is opened.
Twice, the first time for writing, and the second time for
reading (if required by caller). When opening the log file for
reading a mode is provided. This doesn't do much harm, but is
unnecessary. Drop the mode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Trivial fix to improve readability by combining these into a compound
conditional.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Coverity reported a potential resource leak. While it's probably not
a real-world scenario, the code could technically jump to cleanup
between the time that vdpafd is opened and when it is used. Ensure that
it gets cleaned up in that case.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Since QEMU 5.2 (commit-77b285f7f6), QEMU supports 'memory failure'
event, posts event to monitor if hitting a hardware memory error.
Fully support this feature for QEMU.
Test with commit 'libvirt: support memory failure event', build a
little complex environment(nested KVM):
1, install newly built libvirt in L1, and start a L2 vm. run command
in L1:
~# virsh event l2 --event memory-failure
2, run command in L0 to inject MCE to L1:
~# virsh qemu-monitor-command l1 --hmp mce 0 9 0xbd000000000000c0 0xd 0x62000000 0x8c
Test result in l1(recipient hypervisor case):
event 'memory-failure' for domain l2:
recipient: hypervisor
action: ignore
flags:
action required: 0
recursive: 0
Test result in l1(recipient guest case):
event 'memory-failure' for domain l2:
recipient: guest
action: inject
flags:
action required: 0
recursive: 0
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All users of virHashTable pass strings as the name/key of the entry.
Make this an official requirement by turning the variables to 'const
char *'.
For any other case it's better to use glib's GHashTable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It doesn't make much sense to configure the bucket count in the hash
table for each case specifically. Replace all calls of virHashCreate
with virHashNew which has a pre-set size and remove virHashCreate
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virHashCreate will be removed in upcoming patches. This change has an
impact on ordering of the blockjob entries in one of the status XML->XML
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use of the -enable-fips option is being deprecated in QEMU >= 5.2.0. If
FIPS compliance is required, QEMU must be built with libcrypt which will
unconditionally enforce it.
Thus there is no need for libvirt to pass -enable-fips to modern QEMU.
Unfortunately there was never any way to probe for -enable-fips in the
first instance, it was enabled by libvirt based on version number
originally, and then later unconditionally enabled when libvirt dropped
support for older QEMU. Similarly we now use a version number check to
decide when to stop passing -enable-fips.
Note that the qemu-5.2 capabilities are currently from the pre-release
version and will be updated once qemu-5.2 is released.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
libvirt can retrieve traffic stats for emulated interfaces that are
backed by tap or macvtap devices, but this information wasn't
available for hostdev interfaces (those that are implemented by
assigning an SR-IOV VF device to a guest using vfio):
#virsh domifstat instance --interface=52:54:00:2d:b2:35
error: Failed to get interface stats instance 52:54:00:2d:b2:35
error: internal error: Interface name not provided
For some SR-IOV VF devices this information is available via the
netlink VFINFO_LIST request/response, and that is what this patch uses
to implement stats retrieval for VF. Not that this is dependent on
support in the PF driver - for example, the Mellanox ConnectX-4 Lx
(mlx5) driver reports usable stats, while Intel 82599 (ixgbe) and
82576 (igb) just report all stats as 0. (this is the same result as
"ip -s link show").
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Laine Stump <laine@redhat.com>
By using the new qemu monitor functions to handle passing and removing
file descriptors, we can support hotplug of vdpa devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
add-fd, remove-fd, and query-fdsets provide functionality that can be
used for passing fds to qemu and closing fdsets that are no longer
necessary.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Enable <interface type='vdpa'> for qemu domains. This provides basic
support and does not support hotplug or migration.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Recent versions of qemu added the -netdev vhost-vdpa device. This
capability allows libvirt to know whether this is supported.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
My code movement changed the type of ifaces_ret from
virDomainInterfacePtr * to virDomainInterfacePtr **,
but failed to adjust the condition or dereference the
array correctly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 6ddb1f803e
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SCSI hostdev setup requires querying the host os for the actual path of
the configured hostdev. This was historically done in the command line
formatter. Our new approach is to split out this part into
'qemuProcessPrepareHost' which is designed to be skipped in tests.
Refactor the hostdev code to use this new semantics, and add appropriate
handlers filling in the data for tests and the qemuConnectDomainXMLToNative
users.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBuildHostdevSCSIAttachPrepare is supposed to prepare the data
structure used for attaching the hostdev not preparing the hostdev
definition itself. Move the corresponding bits to qemuDomainPrepareHostdev
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Host preparation steps which are deliberately skipped when
pretend-creating a commandline are normally executed after VM object
preparation. In the test code we are faking some of the host
preparation steps, but we were doing that prior to the call to
qemuProcessPrepareDomain embedded in qemuProcessCreatePretendCmd.
By splitting up qemuProcessCreatePretendCmd into two functions we can
ensure that the ordering of the prepare steps stays consistent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to the new QMP command once it becomes available. Since the code
was refactored to have just one central location to do this we can
contain the ugly bits to just this one function.
Since we now use the replacement for 'nbd-server-add' mark the test case
as being OK with removal of the command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the monitor code, corresponding generator of properties for NBD and
tests validating it against the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'block-export-add' QMP command is a replacement for 'nbd-server-add'
and will allow greater flexibility. Add a capability so that we can
switch to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Centralize the logic deciding which arguments to use when exporting a
block backend via NBD to a single place so that it can be centrally
fixed in upcoming commits to support the new export method via
'block-export-add'.
Additionally this allows simplification of the caller from migration as
the logic deciding which arguments to use is extracted too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
This patch enables autofill of these attributes right before launching
QEMU and thus updating the live XML.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Checks such as this one should be done at domain def validation time,
not before starting the QEMU process.
As for this change, existing domains will see some QEMU error when
starting as opposed to a libvirt error that this QEMU binary doesn't
support SEV, but that's okay, we never guaranteed error messages to
remain the same.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
