The virt-dbus.m4 check for DBus was preserving $LIBS before
modifying it. Except it wasn't. It was preserving another
copy of $CFLAGS. The result was that after the check completed,
$LIBS got polluted with $CFLAGS
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 39c77fe triggered random failures, depending on the platform
and what other fds leak into the testsuite (for me, it passed on
RHEL 6 but failed on Fedora 18). The reason was that we were
expecting an fd that fell outside of our reserved range. By reserving
a larger range, the test once again passes on all platforms.
* tests/commandtest.c (mymain): Reserve enough fds.
Otherwise, we get a lot of scary (but harmless) noise in the logs:
2013-02-05 15:35:48.555+0000: 8637: error : qemuMonitorJSONCheckError:353 : internal error unable to execute QEMU command 'add-fd': Parameter 'fdset-id' expects an existing fdset-id
one for every qemu 1.2 binary that we probe.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONAddFd): During
probe, avoid logging failures.
As a step towards making virDomainObjList thread-safe turn it
into an opaque virObject, preventing any direct access to its
internals.
As part of this a new method virDomainObjListForEach is
introduced to replace all existing usage of virHashForEach
Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.
NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previous change to the generator, changed too much - only
the functions are in 'virerror.c', the constants remained in
'virerror.h' which could not be renamed for API compat reasons.
Add a test case to sanity check the generated python bindings
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If a compression binary prints something to stderr, currently
it is discarded. However, it can contain useful data from
debugging POV, so we should catch it.
If a decompression binary prints something to stderr, currently
it is discarded. However, it can contain useful data from
debugging POV, so we should catch it.
Commit 34e8f63a32 introduced support for catching errors from
libvirt iohelper. However, at those times there wasn't such fancy
API as virCommandDoAsyncIO(), so everything has to be implemented
on our own. But since we do have the API now, we can use it and
drop our implementation then.
This is just a basic test, so we don't break virCommand in the
future. A "Hello world\n" string is written to commanhelper,
which copies input to stdout and stderr where we read it from.
Then the read strings are compared with expected values.
Currently, if we want to feed stdin, or catch stdout or stderr of a
virCommand we have to use virCommandRun(). When using virCommandRunAsync()
we have to register FD handles by hand. This may lead to code duplication.
Hence, introduce an internal API, which does this automatically within
virCommandRunAsync(). The intended usage looks like this:
virCommandPtr cmd = virCommandNew*(...);
char *buf = NULL;
...
virCommandSetOutputBuffer(cmd, &buf);
virCommandDoAsyncIO(cmd);
if (virCommandRunAsync(cmd, NULL) < 0)
goto cleanup;
...
if (virCommandWait(cmd, NULL) < 0)
goto cleanup;
/* @buf now contains @cmd's stdout */
VIR_DEBUG("STDOUT: %s", NULLSTR(buf));
...
cleanup:
VIR_FREE(buf);
virCommandFree(cmd);
Note, that both stdout and stderr buffers may change until virCommandWait()
returns.
libvirt.c calls curl_global_init() if WITH_CURL is defined and thus it
should be linked with libcurl. This fixes link failure in case neither
xenapi nor esx driver is enabled (they are the only users of libcurl).
When a changelog entry references an RPM macro, % needs to be escaped so
that it does not appear expanded in package changelog.
Fri Mar 4 2009 is incorrect since Mar 4 was Wednesday. Since
libvirt-0.6.1 was released on Mar 4 2009, we should change Fri to Wed.
QEMU is fully capable of handling VDI images and we just refuse to
work with them. As qemu-img knows and supports this, there should be
no problem with this addition.
This is of course, just basic functionality, without searching for any
backing files, etc.
Some files have the magic shifted to some offset other than 0, so we
have to support that. I also cleaned up some lines to be more
readable and added missing magic for iso file format.
This patch switches string option retrieval to vshCommandOptStringReq
and refactors some error paths to avoid an unlikely memory leak of a
secret object in cmdSecretSetValue.
also avoids potential NULL pointer dereference:
$ virsh snapshot-current asdf ""
error: invalid snapshotname argument '(null)'
by removing the error message in favor of vshCommandOptStringReq
This patch adds some empty lines to separate blocks of code, cleans up
unnecessary error message constructs in cmdNodeDeviceDetach,
cmdNodeDeviceReAttach, cmdNodeDeviceReset and refactors error paths in
cmdNodeDeviceDumpXML.
This patch adds a helper function with similar semantics to
vshCommandOptString that requests a string argument, but does some error
reporting without the need to do it in the functions themselves.
The error reporting also provides information about the parameter whose
retrieval failed.
Commit 4445e16bfa changed the signature
of esxConnectToHost and esxConnectToVCenter by replacing the esxPrivate
pointer with virConnectPtr. The esxPrivate pointer was then retrieved
again from virConnectPtr's privateData. This resulted in a NULL pointer
dereference, because the privateData pointer was not yet initialized at
the point where esxConnectToHost and esxConnectToVCenter are called.
This was fixed in commit b126715a48 that
moved the initialization of privateData before the problematic calls.
Simplify the logic by making the call to esxFreePrivate unconditional and
changing esxConnectToHost and esxConnectToVCenter back to take a esxPrivate
pointer directly. This allows to assign esxPrivate to the virConnectPtr's
privateData pointer as one of the last steps in esxOpen making it more
obvious that it is not initialized during the earlier steps of esxOpen.
Commit 6094ad7b (0.9.3 release) promoted several functions from
internal to public, but forgot to fix the documentation generator
to provide details about those functions.
For an example of what this fixes, look at:
file:///path/to/libvirt/docs/html/libvirt-libvirt.html#virEventAddHandle
before and after the patch.
* docs/apibuild.py (ignored_functions): Don't ignore functions
that were turned into official API.
* src/util/virevent.c: Fix comments to pass through parser.
CVE-2013-0242 in glibc's regex() can cause a DoS in any daemon
that runs a regex search on user input while in a multibyte locale.
I'm not sure how hard it would be to trigger such a setup for
libvirtd, but rather than risk things, we can avoid the issue:
gnulib has worked around the problem, and by updating to the latest
gnulib, we can avoid the bug even on platforms where glibc has yet
to be patched.
* .gnulib: Update to latest, for various fixes, including regex.
* bootstrap: Resync from upstream.
In commit 3ac26e2645 parameter "path" was
renamed to "disk" but this change was not reflected in the documentation.
Additionally, documentation of the "opaque" parameter was missing.
Add support for QEMU -add-fd command line parameter detection.
This intentionally rejects qemu 1.2, where 'add-fd' QMP did
not allow full control of set ids, and where there was no command
line counterpart, but accepts qemu 1.3.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add entry points for calling the qemu 'add-fd' and 'remove-fd'
monitor commands. There is no entry point for 'query-fdsets';
the assumption is that a developer can use
virsh qemu-monitor-command domain '{"execute":"query-fdsets"}'
when debugging issues, and that meanwhile, libvirt is responsible
enough to remember what fds it associated with what fdsets.
Likewise, on the 'add-fd' command, it is assumed that libvirt
will always pass a set id, rather than letting qemu autogenerate
the next available id number.
* src/qemu/qemu_monitor.c (qemuMonitorAddFd, qemuMonitorRemoveFd):
New functions.
* src/qemu/qemu_monitor.h (qemuMonitorAddFd, qemuMonitorRemoveFd):
New prototypes.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONAddFd)
(qemuMonitorJSONRemoveFd): New functions.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONAddFd)
(qemuMonitorJSONRemoveFd): New prototypes.
While testing QMP, I used a simple qemu session of
'qemu-kvm -M none -nodefaults -nographic -qmp stdio'
for some experiments. But it took me far too long to remember
the magic invocation to unlock QMP into accepting normal commands.
While I was able to grep libvirt sources and easily find where
libvirt expects the normal "QMP" greeting, I could not find the
proper reply to that greeting nearby.
Reading the testsuite didn't help either, since there we don't
emulate the mandatory handshake. But since my grep hit the
testsuite, adding a bit of documentation will make it much easier
to jog my memory in the future.
* tests/qemumonitortestutils.c (QEMU_JSON_GREETING): Mention that
the normal counterpart reply is skipped.
The macro was made to help installing broken packages that did not use
DESTDIR correctly by overriding individual path variables (prefix,
sysconfdir, ...). Newer rpm provides fixed make_install macro that calls
make install with just the correct DESTDIR, however it is not available
everywhere (e.g., RHEL 5 does not have it). On the other hand the
make_install macro is simple and straightforward enough for us to use
its expansion directly.
