The udevFreeIfaceDef function in the udev interface driver
just duplicates code from virInterfaceDefFree. Delete it
and call the standard API instead.
Fix the udevGetIfaceDefVlan method so that it doesn't
store pointers to the middle of a malloc'd memory
area.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Among others, this fixes a cosmetic bug where bootstrap stated:
./bootstrap: Bootstrapping from checked-out http://libvirt.org sources...
instead of the intended:
./bootstrap: Bootstrapping from checked-out libvirt sources...
* .gnulib: Update to latest, for bootstrap improvement.
* bootstrap: Resync from gnulib.
Recent commit '53531e16' resulted in a new Coverity warning regarding
a missing break in the ':' options processing. Adjust the commit to
avoid the issue.
The LXC, QEMU, and LibXL drivers have all merged their handling of
the attach/update/modify device APIs into one large
'xxxxDomainModifyDeviceFlags'
which then does a 'switch()' based on the actual API being invoked.
While this saves some lines of code, it is not really all that
significant in the context of the driver API impls as a whole.
This merger of the handling of different APIs creates pain when
wanting to automated analysis of the code and do things which
are specific to individual APIs. The slight duplication of code
from unmerged the API impls, is preferrable to allow for easier
automated analysis.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the parsing of XML is pushed down into the various
migration helper APIs. This makes it difficult to insert the
correct access control checks, since one helper API services
many public APIs. Pull the parsing of XML up to the top level
of the QEMU driver APIs
Several APIs allow for custom XML to be passed in. This is
checked for ABI stability, which will ensure the UUID is
not being changed. There isn't validation that the name
did not change though. This could allow renaming of guests
via the backdoor, which in turn could allow for bypassing
access control restrictions based on names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In renaming driver API implementations to match the
public API naming scheme, a few cases in the node
device driver were missed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The individual hypervisor drivers were directly referencing
APIs in virnodesuspend.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be removed
from the virnodesuspend.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The individual hypervisor drivers were directly referencing
APIs in src/nodeinfo.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be
removed from the nodeinfo.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.
This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.
Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since PIDs can be reused, polkit prefers to be given
a (PID,start time) pair. If given a PID on its own,
it will attempt to lookup the start time in /proc/pid/stat,
though this is subject to races.
It is safer if the client app resolves the PID start
time itself, because as long as the app has the client
socket open, the client PID won't be reused.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are various methods named "virXXXXSecurityContext",
which are specific to SELinux. Rename them all to
"virXXXXSELinuxContext". They will still raise errors at
runtime if SELinux is not compiled in
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It is possible for $line to be undefined at first used, if
the symfile doesn't have a section prefix (which is the case
for auto-generated symfiles).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the volume is of a clustered volume group, and not active, the
related pool APIs fails on opening /dev/vg/lv. If the volume is
suspended, it hangs on open(2) the volume.
Though the best solution is to expose the volume status in volume
XML, and even better to provide API to activate/deactivate the volume,
but it's not the work I want to touch currently. Volume status in
other status is just fine to skip.
About the 5th field of lv_attr (from man lvs[8])
<quote>
5 State: (a)ctive, (s)uspended, (I)nvalid snapshot, invalid
(S)uspended snapshot, snapshot (m)erge failed,suspended
snapshot (M)erge failed, mapped (d)evice present without
tables, mapped device present with (i)nactive table
</quote>
While reviewing proposed VIR_STRDUP conversions, I've already noticed
several places that do:
if (str && VIR_STRDUP(dest, str) < 0)
which can be simplified by allowing str to be NULL (something that
strdup() doesn't allow). Meanwhile, code that wants to ensure a
non-NULL dest regardless of the source can check for <= 0.
Also, make it part of the VIR_STRDUP contract that macro arguments
are evaluated exactly once.
* src/util/virstring.h (VIR_STRDUP, VIR_STRDUP_QUIET, VIR_STRNDUP)
(VIR_STRNDUP_QUIET): Improve contract.
* src/util/virstring.c (virStrdup, virStrndup): Change return
conventions.
* docs/hacking.html.in: Document this.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
VIR_APPEND_ELEMENT(array, size, elem) was not safe if the expression
for 'size' had side effects. While no one in the current code base
was trying to pass side effects, we might as well be robust and
explicitly document our intentions.
* src/util/viralloc.c (virInsertElementsN): Add special case.
* src/util/viralloc.h (VIR_APPEND_ELEMENT): Use it.
(VIR_ALLOC, VIR_ALLOC_N, VIR_REALLOC_N, VIR_EXPAND_N)
(VIR_RESIZE_N, VIR_SHRINK_N, VIR_INSERT_ELEMENT)
(VIR_DELETE_ELEMENT, VIR_ALLOC_VAR, VIR_FREE): Document
which macros are safe in the presence of side effects.
* docs/hacking.html.in: Document this.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
VFIO device assignment requires a cgroup ACL to be setup for access to
the /dev/vfio/nn "group" device for any devices that will be assigned
to a guest. In the case of a host device that is allocated from a
pool, it was being allocated during qemuBuildCommandLine(), which is
called by qemuProcessStart() *after* the all-encompassing
qemuSetupCgroup() was called, meaning that the standard Cgroup ACL
setup wasn't creating ACLs for these devices allocated from pools.
One possible solution was to manually add a single ACL down inside
qemuBuildCommandLine() when networkAllocateActualDevice() is called,
but that has two problems: 1) the function that adds the cgroup ACL
requires a virDomainObjPtr, which isn't available in
qemuBuildCommandLine(), and 2) we really shouldn't be doing network
device setup inside qemuBuildCommandLine() anyway.
Instead, I've created a new function called
qemuNetworkPrepareDevices() which is called just before
qemuPrepareHostDevices() during qemuProcessStart() (explanation of
ordering in the comments), i.e. well before the call to
qemuSetupCgroup(). To minimize code churn in a patch that will be
backported to 1.0.5-maint, qemuNetworkPrepareDevices only does
networkAllocateActualDevice() and the bare amount of setup required
for type='hostdev network devices, but it eventually should do *all*
device setup for guest network devices.
Note that some of the code that was previously needed in
qemuBuildCommandLine() is no longer required when
networkAllocateActualDevice() is called earlier:
* qemuAssignDeviceHostdevAlias() is already done further down in
qemuProcessStart().
* qemuPrepareHostdevPCIDevices() is called by
qemuPrepareHostDevices() which is called after
qemuNetworkPrepareDevices() in qemuProcessStart().
As hinted above, this new function should be moved into a separate
qemu_network.c (or similarly named) file along with
qemuPhysIfaceConnect(), qemuNetworkIfaceConnect(), and
qemuOpenVhostNet(), and expanded to call those functions as well, then
the nnets loop in qemuBuildCommandLine() should be reduced to only
build the commandline string (which itself can be in a separate
qemuInterfaceBuilldCommandLine() function as suggested by
Michal). However, this will require storing away an array of tapfd and
vhostfd that are needed for the commandline, so I would rather do that
in a separate patch and leave this patch at the minimum to fix the
bug.
If no todo.cfg is present, make sure the stub is in HTML5
format and clearly states that the config was not available
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The Windows port page currently links to pre-built libvirt
DLLs for release 0.8.8 which are 2 years old now. Until we
can reliably produce official Windows installers, point
people to the virt-viewer MSI installers instead which
include the libvirt DLLs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On architectures not supporting the Intel specific programmable interval
timer, like e.g. S390, starting a domain with a clock definition containing
a pit timer results in the error "Option no-kvm-pit-reinjection not supported
for this target".
By moving the capability enablement for -no-kvm-pit-reinjection from the
InitQMPBasic section into the x86_64 and i686 only enablement section all
other architectures are no longer automatically enabled. In addition
architecture related capabilities enablements have refactored into a new
architecture bound capabilities initialization function.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
We have seen an issue on s390x platform where domain XMLs larger than 1MB
were used. The define command was finished successfully. The dumpxml command
was not successful (i.e. could not encode message payload).
Enlarged message related sizes (e.g. maximum string size, message size, etc.)
to handle larger system configurations used on s390x platform.
To improve handling of the RPC message size the allocation during encode process
is changed to a dynamic one (i.e. starting with 64kB initial size and increasing
that size in steps up to 16MB if the payload data is larger).
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The XSL for generating the API docs was missing the HTML5
namespace declarations. The todo and hvsupport scripts were
also missing the HTML5 doctype / namespace declaration.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When attempting to generate the native command line from an XML file
that uses graphics port auto allocation, the generated commandline
wouldn't be valid.
This patch adds fake autoallocation of ports as done when starting the
actual machine.
https://bugzilla.redhat.com/show_bug.cgi?id=924501 tracks a
problem that occurs if uid 107 is already in use at the time
libvirt is first installed. In response that problem, Fedora
packaging guidelines were recently updated. This fixes the
spec file to comply with the new guidelines:
https://fedoraproject.org/wiki/Packaging:UsersAndGroups
* libvirt.spec.in (daemon): Follow updated Fedora guidelines.
Signed-off-by: Eric Blake <eblake@redhat.com>
On a mingw build, 'make distcheck' fails with:
GEN libvirt_qemu.def
make[3]: *** No rule to make target `../../src/libvirt_lxc.syms', needed by `libvirt_lxc.def'. Stop.
I traced it to a missing entry in EXTRA_DIST. But rather than keep
the entire list in sync, it is easier to list the three syms files
that drive .so files directly, and then reuse existing makefile
variables for the remaining files (that is, I validated that all
remaining files are added to SYM_FILES, possibly via USED_SYM_FILES,
according to makefile conditionals).
Problem introduced in commit 3d1596b (v1.0.2).
* src/Makefile.am (EXTRA_DIST): Ensure all syms files are shipped.
Signed-off-by: Eric Blake <eblake@redhat.com>
The code adaptation is not done right now, but in subsequent patches.
Hence I am not implementing syntax-check rule as it would break
compilation. Developers are strongly advised to use these new macros.
They are similar to VIR_ALLOC() logic: VIR_STRDUP(dst, src) returns zero
on success, -1 otherwise. In case you don't want to report OOM error,
use the _QUIET variant of a macro.
Add missing 'html:' namespace prefix to a few more XSL
rules for generating the table of contents links
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I must have looked at this a couple dozen times before I noticed it
had "!=" instead of "==". Not doing this setup prevented qemu from
doing anything with the vfio group device.
The previous commit failed to update the XSL to take account
of fact that in XHTML mode the elements need namespace
prefixes. This caused every web page to be blank!
The rule generating the HTML docs passing the --html flag
to xsltproc. This makes it use the legacy HTML parser, which
either ignores or tries to fix all sorts of broken XML tags.
There's no reason why we should be writing broken XML in
the first place, so removing --html and adding the XHTML
doctype to all files forces us to create good XML.
This adds the XHTML doc type and fixes many, many XML tag
problems it exposes.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the non linux case some callers like gather_scsi_host_caps needed the
return code of -1 while others like update_caps needed an empty
statement (to avoid a "statement without effect" warning). This is much
simpler solved by using a function instead of a define.
A 'uri' parameter was added for the benefit of sanlock. This
causes a warning in the lockd driver though
2013-05-03 13:20:35.347+0000: 28403: error : virLockManagerLockDaemonNew:482 : internal error Unexpected parameter uri for object
Ignore this parameter, since lockd does not require it and it
is harmless if not used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This should resolve https://bugzilla.redhat.com/show_bug.cgi?id=958907
Recent new addition of code to read/write active network state to the
NETWORK_STATE_DIR in the network driver broke startup for
qemu:///session. The network driver had several state file paths
hardcoded to /var, which could never possibly work in session mode.
This patch modifies *all* state files to use a variable string that is
set differently according to whether or not we're running
privileged. (It turns out that logDir was never used, so it's been
completely eliminated.)
There are very definitely other problems preventing dnsmasq and radvd
from running in non-privileged mode, but it's more consistent to have
the directories used by them be determined in the same fashion.
NB: I've noted before that the network driver is storing its state
(including dnsmasq and radvd state) in /var/lib, while qemu stores its
state in /var/run. It would probably have been better if the two
matched, but it's been this way for a long time, and changing it would
break running installations during an upgrade, so it's best to just
leave it as it is.
