Since the deallocator is passed into the constructor of
a hash table it is not desirable to pass it into each
function again. Remove it from all functions, but provide
a virHashSteal to allow a item to be removed from a hash
table without deleteing it.
* src/util/hash.c, src/util/hash.h: Remove deallocator
param from all functions. Add virHashSteal
* src/libvirt_private.syms: Add virHashSteal
* src/conf/domain_conf.c, src/conf/nwfilter_params.c,
src/nwfilter/nwfilter_learnipaddr.c,
src/qemu/qemu_command.c, src/xen/xm_internal.c: Update
for changed hash API
Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'
followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.
* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
When attaching a device that already exists, xend driver updates
the device with "device_configure", it causes problems (e.g. for
disk device, 'device_configure' only can be used to update device
like CDROM), on the other hand, we provide additional API
(virDomainUpdateDevice) to update device, this fix is to raise up
errors instead of updating the existed device which is not CDROM
device.
Changes from v1 to v2:
- allow to update CDROM
* src/xen/xend_internal.c
Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.
This extends the round up fix in 6002e0406c
to the whole codebase.
Instead of reporting errors for odd values in the VMX code round them up.
Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.
Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.
I broke 'make check' with commit 04197350 by unconditionally
emitting 'hap=' in xen xm driver. Only emit 'hap=' if
xendConfigVersion >= 3. I've tested sending 'hap=' to a Xen 3.2
machine without support for hap setting and verified that xend
silently drops the unrecognized setting.
xen-unstable c/s 16931 introduced a per-domain setting for hvm
guests to enable/disable hardware assisted paging. If disabled,
software techniques such as shadow page tables are used. If enabled,
and the feature exists in underlying hardware, hardware support for
paging is used.
Xen does not provide a mechanism to discover the HAP capability, so
we advertise its availability for hvm guests on Xen >= 3.3.
xen-unstable c/s 16931 introduced a per-domain setting for hvm
guests to enable/disable hardware assisted paging. If disabled,
software techniques such as shadow page tables are used. If enabled,
and the feature exists in underlying hardware, hardware support for
paging is used.
This provides implementation for mapping HAP setting to/from
domxml/native formats in xen drivers.
The nodeinfo structure includes
nodes : the number of NUMA cell, 1 for uniform mem access
sockets : number of CPU socket per node
cores : number of core per socket
threads : number of threads per core
which does not work well for NUMA topologies where each node does not
consist of integral number of CPU sockets.
We also have VIR_NODEINFO_MAXCPUS macro in public libvirt.h which
computes maximum number of CPUs as (nodes * sockets * cores * threads).
As a result, we can't just change sockets to report total number of
sockets instead of sockets per node. This would probably be the easiest
since I doubt anyone is using the field directly. But because of the
macro, some apps might be using sockets indirectly.
This patch leaves sockets to be the number of CPU sockets per node (and
fixes qemu driver to comply with this) on machines where sockets can be
divided by nodes. If we can't divide sockets by nodes, we behave as if
there was just one NUMA node containing all sockets. Apps interested in
NUMA should consult capabilities XML, which is what they probably do
anyway.
This way, the only case in which apps that care about NUMA may break is
on machines with funky NUMA topology. And there is a chance libvirt
wasn't able to start any guests on those machines anyway (although it
depends on the topology, total number of CPUs and kernel version).
Nothing changes at all for apps that don't care about NUMA.
Except LXC and UML driver, implementations of all other drivers
simply return 0, because these drivers doesn't have config both
in memory and on disk, no need to track if the domain of these
drivers updated or not.
Rename "xenUnifiedDomainisPersistent" to "xenUnifiedDomainIsPersistent"
* esx/esx_driver.c
* lxc/lxc_driver.c
* opennebula/one_driver.c
* openvz/openvz_driver.c
* phyp/phyp_driver.c
* test/test_driver.c
* uml/uml_driver.c
* vbox/vbox_tmpl.c
* xen/xen_driver.c
* xenapi/xenapi_driver.c
Similarly to deprecating close(), I am now deprecating fclose() and
introduce VIR_FORCE_FCLOSE() and VIR_FCLOSE(). Also, fdopen() is replaced with
VIR_FDOPEN().
Most of the files are opened in read-only mode, so usage of
VIR_FORCE_CLOSE() seemed appropriate. Others that are opened in write
mode already had the fclose()< 0 check and I converted those to
VIR_FCLOSE()< 0.
I did not find occurrences of possible double-closed files on the way.
Introduce implementations of the virDomainOpenConsole() API
for LXC, Xen and UML drivers.
* src/lxc/lxc_driver.c, src/lxc/lxc_driver.c,
src/xen/xen_driver.c: Wire up virDomainOpenConsole
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.
* src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in, src/driver.h: Define the
new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
API entry point
xencapstest calls xenHypervisorMakeCapabilitiesInternal with conn == NULL
which calls xenDaemonNodeGetTopology with conn == NULL when a recent
enough Xen was detected (sys_interface_version >= SYS_IFACE_MIN_VERS_NUMA).
But xenDaemonNodeGetTopology insists in having conn != NULL and fails,
because it expects to be able to talk to an actual xend.
We cannot do that in a 'make check' test. Therefore, only call the xend
subdriver function when conn isn't NULL.
Reported by Andy Howell and Jim Fehlig.
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
This extends the XML syntax for <graphics> to allow a password
expiry time to be set
eg
<graphics type='vnc' port='5900' autoport='yes' keymap='en-us' passwd='12345' passwdValidTo='2010-04-09T15:51:00'/>
The timestamp is in UTC.
* src/conf/domain_conf.h: Pull passwd out into separate struct
virDomainGraphicsAuthDef to allow sharing between VNC & SPICE
* src/conf/domain_conf.c: Add parsing/formatting of new passwdValidTo
argument
* src/opennebula/one_conf.c, src/qemu/qemu_conf.c, src/qemu/qemu_driver.c,
src/xen/xend_internal.c, src/xen/xm_internal.c: Update for changed
struct containing VNC password
* src/xen/xend_internal.c (xenDaemonFormatSxpr): Hoist verify
outside of function to avoid a -Wnested-externs warning.
* src/xen/xm_internal.c (xenXMDomainConfigFormat): Likewise.
Reported by Daniel P. Berrange.
* src/xen/xen_hypervisor.c (MAX_VIRT_CPUS): Move...
* src/xen/xen_driver.h (MAX_VIRT_CPUS): ...so all xen code can see
same value.
* src/xen/xend_internal.c (sexpr_to_xend_domain_info)
(xenDaemonDomainGetVcpusFlags, xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Work if MAX_VIRT_CPUS is 64 on a platform
where long is 64-bits.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
This patch series focuses on xendConfigVersion 2 (xm_internal) and 3
(xend_internal), but leaves out changes for xenapi drivers.
See this link for more details about vcpu_avail for xm usage.
http://lists.xensource.com/archives/html/xen-devel/2009-11/msg01061.html
This relies on the fact that def->maxvcpus can be at most 32 with xen.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(sexpr_to_xend_domain_info, xenDaemonFormatSxpr): Use vcpu_avail
when current vcpus is less than maximum.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr: New file.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr: Likewise.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.cfg: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.xml: Likewise.
* tests/xml2sexprtest.c (mymain): New test.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
Although this patch adds a distinction between maximum vcpus and
current vcpus in the XML, the values should be identical for all
drivers at this point. Only in subsequent per-driver patches will
a distinction be made.
In general, virDomainGetInfo should prefer the current vcpus.
* src/conf/domain_conf.h (_virDomainDef): Adjust vcpus to unsigned
short, to match virDomainGetInfo limit. Add maxvcpus member.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefFormat): parse and print out vcpu details.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Manage both vcpu numbers, and require them
to be equal for now.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* src/phyp/phyp_driver.c (phypDomainDumpXML): Likewise.
* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineXML)
(openvzDomainCreateXML, openvzDomainSetVcpusInternal): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxDomainDefineXML):
Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/esx/esx_vmx.c (esxVMX_ParseConfig, esxVMX_FormatConfig):
Likewise.
* src/qemu/qemu_conf.c (qemuBuildSmpArgStr)
(qemuParseCommandLineSmp, qemuParseCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/opennebula/one_conf.c (xmlOneTemplate): Likewise.
Note - this wrapping is completely mechanical; the old API will
function identically, since the new API validates that the exact
same flags are provided by the old API. On a per-driver basis,
it may make sense to have the old API pass a different set of flags,
but that should be done in the per-driver patch that implements
the full range of flag support in the new API.
* src/esx/esx_driver.c (esxDomainSetVcpus, escDomainGetMaxVpcus):
Move guts...
(esxDomainSetVcpusFlags, esxDomainGetVcpusFlags): ...to new
functions.
(esxDriver): Trivially support the new API.
* src/openvz/openvz_driver.c (openvzDomainSetVcpus)
(openvzDomainSetVcpusFlags, openvzDomainGetMaxVcpus)
(openvzDomainGetVcpusFlags, openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDomainSetCPU)
(phypDomainSetVcpusFlags, phypGetLparCPUMAX)
(phypDomainGetVcpusFlags, phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSetVcpus)
(qemudDomainSetVcpusFlags, qemudDomainGetMaxVcpus)
(qemudDomainGetVcpusFlags, qemuDriver): Likewise.
* src/test/test_driver.c (testSetVcpus, testDomainSetVcpusFlags)
(testDomainGetMaxVcpus, testDomainGetVcpusFlags, testDriver):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainSetVcpus)
(vboxDomainSetVcpusFlags, virDomainGetMaxVcpus)
(virDomainGetVcpusFlags, virDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSetVcpus)
(xenUnifiedDomainSetVcpusFlags, xenUnifiedDomainGetMaxVcpus)
(xenUnifiedDomainGetVcpusFlags, xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainSetVcpus)
(xenapiDomainSetVcpusFlags, xenapiDomainGetMaxVcpus)
(xenapiDomainGetVcpusFlags, xenapiDriver): Likewise.
(xenapiError): New helper macro.
* src/xen/sexpr.c: Ensure () are escaped in sexpr2string
* tests/sexpr2xmldata/sexpr2xml-boot-grub.sexpr,
tests/sexpr2xmldata/sexpr2xml-boot-grub.xml,
tests/xml2sexprdata/xml2sexpr-boot-grub.sexpr,
tests/xml2sexprdata/xml2sexpr-boot-grub.xml: Data files to
check escaping
* tests/sexpr2xmltest.c, tests/xml2sexprtest.c: Add boot-grub
escaping test case
Adding parsing code for memory tunables in the domain xml file
also change the internal define structures used for domain memory
informations
Adds a new specific test
Public api to set/get memory tunables supported by the hypervisors.
dv:
* some cleanups in libvirt.c
* adding extra checks in libvirt.c new entry points
v4:
* Move exporting public API to this patch
* Add unsigned int flags to the public api for future extensions
v3:
* Add domainGetMemoryParamters and NULL in all the driver interface
v2:
* Initialize domainSetMemoryParameters to NULL in all the driver
interface structure.
According to API documentation virDomain{At,De}tachDevice calls are
supposed to only work on active guests for device hotplug. For anything
beyond that, their *Flags variants have to be used.
Despite the variant which was acked on libvirt mailing list
(https://www.redhat.com/archives/libvir-list/2010-January/msg00385.html)
commit ed9c14a7ef (by Jim Fehlig)
introduced automagic behavior of these API calls for xen driver. Since
January, these calls always change persistent configuration of a guest
and if the guest is currently active, they also hot(un)plug the device.
That change didn't follow API documentation and also broke device
hot(un)plug for older xend implementations which do not support changing
persistent configuration of a guest and hot(un)plugging in one step.
This patch should not break anything for active guests. On the other
hand, changing inactive guests is not supported any more.
When a user calls to virDomain{Attach,Detach,Update}DeviceFlags() with
flags == VIR_DOMAIN_DEVICE_MODIFY_LIVE on an inactive guest running on
an old Xen hypervisor (such as RHEL-5) xend_internal driver reports:
Xend version does not support modifying persistent config
which is pretty confusing since no-one requested to modify persistent
config.
The xm internal xen driver only supports disk and network devices to be
added to a guest. On an attempt to attach any other device the xm driver
used VIR_ERR_XML_ERROR which resulted in a completely bogus error
message:
error: Failed to attach device from pci.xml
error: XML description for unknown device is not well formed or invalid
Apparently the xen block device statistics moved from
"/sys/devices/xen-backend/vbd-%d-%d/statistics/%s"
to
"/sys/bus/xen-backend/devices/vbd-%d-%d/statistics/%s"
* src/xen/block_stats.c: try the extra path in case of failure to
find the statistics in /sys
Xen4.0 includes a new blktap2 implementation, which is specified
with 'tap2' prefix. AFAICT it's configuration syntax is identical
to blktap, with exception of 'tap2' vs 'tap' prefix. This patch
takes the simple approach of accepting and generating sexp
containing 'tap2' prefix.
Xen supports on_crash actions coredump-{destroy,restart}. libvirt
cannot parse config returned by xend that contains either of these
actions
xen52 # xm li -l test | grep on_crash
(on_crash coredump-restart)
xen52 # virsh dumpxml test
error: internal error unknown lifecycle type coredump-restart
This patch adds a new virDomainLifecycleCrash enum and appends
the new options to existing destroy, restart, preserve, and
rename-restart options.
Doing `virsh schedinfo rhel5u3 --cap 65535' the hypervisor does the
call, but does not change the value nor raise an error. Best is just to
consider it's not in the allowed values. The problem is that the error
won't be output since the xend driver will then be called and raise an
error
error: this function is not supported by the hypervisor: unsupported
in xendConfigVersion < 4
which will override the useful information from
xenUnifiedDomainSetSchedulerParameters(). So best is to also invert the
order in which the xen sub-drivers are called.
* src/xen/xen_hypervisor.c: mark 65535 cap value as out of bound
* src/xen/xen_hypervisor.c: reverse the order of the calls to the xen
sub drivers to get the error message if needed
According to <xen-3.4.3/tools/python/xen/xm/create.py:158>
gopts.var('bootargs', val='NAME',
fn=set_value, default=None,
use="Arguments to pass to boot loader")
the "bootloader_args" parameter needs to be translated into "bootargs"
when using "virsh domxml-to-native xen-xm".
The reverse direction (domxml-from-native) is already okay.
This patch fixes domxml-to-native and adds two test files to catch this
problem.
Signed-off-by: Philipp Hahn <hahn@univention.de>
The recent switch to enable -Wlogical-op paid off again.
gcc 4.5.0 (rawhide) is smarter than 4.4.4 (Fedora 13).
* src/xen/xend_internal.c (xenDaemonAttachDeviceFlags)
(xenDaemonUpdateDeviceFlags, xenDaemonDetachDeviceFlags): Use
correct operator.
Signed-off-by: Eric Blake <eblake@redhat.com>
This fixes a leak described in
https://bugzilla.redhat.com/show_bug.cgi?id=590073
xenUnifiedDomainInfoList has a pointer to a list of pointers to
xenUnifiedDomain. We were freeing up all the domains, but neglecting
to free the list.
This was found by Paolo Bonzini <pbonzini@redhat.com>.
All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.
This will be used to differentiate between a serial vs. virtio console for
QEMU.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There is actually a difference between the character device type (serial,
parallel, channel, ...) and the target type (virtio, guestfwd). Currently
they are awkwardly conflated.
Start to pull them apart by renaming targetType -> deviceType. This is
an entirely mechanical change.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
When doing a PCI secondary bus reset, we must be sure that there are no
active devices on the same bus segment. The active device tracking is
designed to only track host devices that are active in use by guests.
This ignores host devices that are actively in use by the host. So the
current logic will reset host devices.
Switch this logic around and allow sbus reset when we are assigning all
devices behind a bridge to the same guest at guest startup or as a result
of a single attach-device command.
* src/util/pci.h: change signature of pciResetDevice to add an
inactive devices list
* src/qemu/qemu_driver.c src/xen/xen_driver.c: use (or not) the new
functionality of pciResetDevice() depending on the place of use
* src/util/pci.c: implement the interface and logic changes
Add the library entry point for the new virDomainQemuMonitorCommand()
entry point. Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.
Changes since v1:
- Go back to using the virDriver table for qemuDomainMonitorCommand, due to
linking issues
- Added versioning information to the libvirt-qemu.so
Changes since v2:
- None
Changes since v3:
- Add LGPL header to libvirt-qemu.c
- Make virLibConnError and virLibDomainError macros instead of function calls
Changes since v4:
- Move exported symbols to libvirt_qemu.syms
Signed-off-by: Chris Lalancette <clalance@redhat.com>
In the current libvirt PCI code, there is no checking whether
a PCI device is in use by a guest when doing node device
detach or reattach. This causes problems when a device is
assigned to a guest, and the administrator starts issuing
nodedevice commands. Make it so that we check the list
of active devices when trying to detach/reattach, and only
allow the operation if the device is not assigned to a guest.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Fixes for issues in commit 211dd1e9 noted by by Jim Meyering.
1. Allocate content buffer of size content_length + 1 to ensure
NUL-termination.
2. Limit content buffer size to 64k
3. Fix whitespace issue
V2:
- Add comment to clarify allocation of content buffer
- Add ATTRIBUTE_NONNULL where appropriate
- User NULLSTR macro
There are cases when a response from xend can exceed 4096 bytes, in
which case anything beyond 4096 is ignored. This patch changes the
current fixed-size, stack-allocated buffer to a dynamically allocated
buffer based on Content-Length in HTTP header.
'listen' isn't a valid qemu-dm option, as reported a long time ago here:
https://bugzilla.redhat.com/show_bug.cgi?id=492958
Matches the near identical logic in qemu_conf.c
v2: When parsing sexpr, only match on ",server", rather than
full ',server,nowait'.
Approximately 60 messages were marked. Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052
Run this command:
git grep -l VIR_WARN|xargs perl -pi -e \
's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'
This defines the internal driver API and stubs out each driver
* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver
* src/xen/xend_internal.c (xend_parse_sexp_desc_char): Add three
uses of sa_assert, each preceding a strchr(value,... to assure
clang that "value" is non-NULL.
git grep found 12 of the former but 100 of the latter in src/.
* src/remote/remote_driver.c (initialise_gnutls): Rename...
(initialize_gnutls): ...to this.
(doRemoteOpen): Adjust caller.
* src/xen/xen_driver.c (xenUnifiedOpen): Adjust output string.
* src/util/network.c: Adjust comments.
Suggested by Matthias Bolte.
virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.
* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
adds the new entry points virDomainManagedSave(),
virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
src/opennebula/one_driver.c src/openvz/openvz_driver.c
src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/xen/xen_driver.c: add corresponding new internal drivers entry
points
To allow the new virDomainUpdateDeviceFlags() API to be universally
used with all drivers, this patch adds an impl to all the current
drivers which support CDROM or Floppy disk media change via the
current virDomainAttachDeviceFlags API
* src/qemu/qemu_driver.c, src/vbox/vbox_tmpl.c,
src/xen/proxy_internal.c, src/xen/xen_driver.c,
src/xen/xend_internal.c: Implement media change via the
virDomainUpdateDeviceFlags API
* src/xen/xen_driver.h, src/xen/xen_hypervisor.c,
src/xen/xen_inotify.c, src/xen/xm_internal.c,
src/xen/xs_internal.c: Stubs for Xen driver entry points
The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.
* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
stubs for new driver entry point
The libvirtd daemon impl will need to switch over to using the
new event APIs. To make this simpler, ensure all drivers currently
providing events support both the new APIs and old APIs.
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c, src/test/test_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Implement the new
virConnectDomainEvent(Dereg|Reg)isterAny driver entry points
The internal domain events APIs are designed to handle the lifecycle
events. This needs to be refactored to allow arbitrary new event
types to be handled.
* The signature of virDomainEventDispatchFunc changes to use
virConnectDomainEventGenericCallback instead of the lifecycle
event specific virConnectDomainEventCallback
* Every registered callback gains a unique ID to allow its
removal based on ID, instead of function pointer
* Every registered callback gains an 'eventID' to allow callbacks
for different types of events to be distinguished
* virDomainEventDispatch is adapted to filter out callbacks
whose eventID does not match the eventID of the event being
dispatched
* virDomainEventDispatch is adapted to filter based on the
domain name and uuid, if this filter is set for a callback.
* virDomainEvent type/detail fields are moved into a union to
allow different data fields for other types of events to be
added later
* src/conf/domain_event.h, src/conf/domain_event.c: Refactor
to allow handling of different types of events
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/xen/xen_driver.c: Change dispatch function signature
to use virConnectDomainEventGenericCallback
The current API for domain events has a number of problems
- Only allows for domain lifecycle change events
- Does not allow the same callback to be registered multiple times
- Does not allow filtering of events to a specific domain
This introduces a new more general purpose domain events API
typedef enum {
VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */
...more events later..
}
int virConnectDomainEventRegisterAny(virConnectPtr conn,
virDomainPtr dom, /* Optional, to filter */
int eventID,
virConnectDomainEventGenericCallback cb,
void *opaque,
virFreeCallback freecb);
int virConnectDomainEventDeregisterAny(virConnectPtr conn,
int callbackID);
Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature
eg
int myDomainEventCallback(virConnectPtr conn,
virDomainPtr dom,
int event,
int detail,
void *opaque)
{
...
}
virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
NULL, NULL);
The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature
* include/libvirt/libvirt.h.in: Define new APIs for registering
domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xenapi/xenapi_driver.c: Stub out new API entries
A few more non-literal format strings in error log messages have crept
in. Fix them in the standard way - turn the format string into "%s"
with the original string as the arg.
* src/xen/proxy_internal.c (xenProxyDomainDumpXML): An invalid packet
could include a too-large "ans.len" value, which would make us allocate
too much memory and then copy data from beyond the end of "ans",
possibly evoking a segfault. Ensure that the value we use is no
larger than the remaining portion of "ans".
Also, change unnecessary memmove to memcpy (src and dest obviously
do not overlap, so no need to use memmove).
(xenProxyDomainGetOSType): Likewise.
(xenProxyGetCapabilities): Likewise.
This provides the internal glue for the driver API
* src/driver.h: Internal API contract
* src/libvirt.c, src/libvirt_public.syms: Connect public API
to driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out entry points
The internal glue layer for the new pubic API
* src/driver.h: Define internal driver API contract
* src/libvirt.c, src/libvirt_public.syms: Wire up public
API to internal driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub new entry point
This extends the XML to allow for
<clock offset='timezone' timezone='Europe/Paris'/>
This is useful if the admin has not configured any timezone on the
host OS, but still wants to synchronize a guest to a specific one.
* src/conf/domain_conf.h, src/conf/domain_conf.c: Support extra
'timezone' attribute on clock configuration
* docs/schemas/domain.rng: Add 'timezone' attribute
* src/xen/xend_internal.c, src/xen/xm_internal.c: Reject configs
with a configurable timezone
The XML will soon be extended to allow more than just a simple
localtime/utc boolean flag. This change replaces the plain
'int localtime' with a separate struct to prepare for future
extension
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a new
virDomainClockDef structure
* src/libvirt_private.syms: Export virDomainClockOffsetTypeToString
and virDomainClockOffsetTypeFromString
* src/qemu/qemu_conf.c, src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
src/xen/xm_internal.c: Updated to use new structure for localtime
* src/xen/xend_internal.c (xenDaemonDomainSetAutostart): Avoid a NULL
dereference upon non-SEXPR_VALUE'd on_xend_start. This bug was
introduced by commit 37ce5600c0.
* src/xen/xend_internal.c (xenDaemonDomainSetAutostart): Rewrite to
avoid dereferencing the result of sexpr_lookup. While in this
particular case, it was guaranteed never to be NULL, due to the
preceding "if sexpr_node(...)" guard, it's cleaner to skip the
sexpr_node call altogether, and also saves a lookup.
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match
* src/xen/xs_internal.c (xenStoreDomainIntroduced): Don't use -1
as an allocation size upon xenStoreNumOfDomains failure.
(xenStoreDomainReleased): Likewise.
* src/xen/xen_hypervisor.c: Remove all "domain == NULL" tests.
* src/xen/xen_hypervisor.h: Instead, use ATTRIBUTE_NONNULL to
mark each "domain" parameter as "known always to be non-NULL".
xen-unstable c/s 20762 bumped XEN_SYSCTL_INTERFACE_VERSION to 7. The
interface change does not affect libvirt, other than xenHypervisorInit()
failing since version 7 is not tried.
The attached patch accommodates the upcoming Xen 4.0 release by checking
for XEN_SYSCTL_INTERFACE_VERSION 7. If found, it sets
XEN_DOMCTL_INTERFACE_VERSION to 6, which is also new to Xen 4.0.
I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
VIR_DEBUG
VIR_DEBUG0
VIR_ERROR
VIR_ERROR0
VIR_INFO
VIR_WARN
VIR_WARN0
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Upstream xen has changed parameters to the migration operation
several times over the past 18 months. Changeset 17553 removed
the resouce parameter, Changesets 17709, 17753, and 20326 added
ssl, node, and change_home_server parameters respectively.
Fortunately, testing has revealed that xend will fail the
operation if a parameter is missing but happily honor it if
unknown parameters are provided. Thus all currently supported
parameters can be provided, satisfying current xend but not
regressing older versions.
xen-unstable c/s 20685 changed the domctl interface, adding a field to
xen_domctl_getdomaininfo structure. This additional field causes stack
corruption in libvirt. xen-unstable c/s 20711 rightly bumped the domctl
interface version so it is at least possible to handle the new field.
This change accounts for shr_pages field added to xen_domctl_getdomaininfo
structure.
When querying about a domain from 0.3.3 (or RHEL 5.3) domain located
on a 0.6.3 (RHEL-5) machine, the errors are not properly reported.
This patch from Olivier Fourdan <ofourdan@redhat.com> , slightly
modified to not change the semantic when the domain os details cannot
be provided
* src/xen/proxy_internal.c src/xen/xen_hypervisor.c: add some missing
error reports
The Xen code for making HVM VT-d PCI passthrough attach and detach
wasn't working properly:
1) In xenDaemonAttachDevice(), we were always trying to reconfigure
a PCI passthrough device, even the first time we added it. This was
because the code in virDomainXMLDevID() was not checking xenstore for
the existence of the device, and always returning 0 (meaning that
the device already existed).
2) In xenDaemonDetachDevice(), we were trying to use "device_destroy"
to detach a PCI device. While you would think that is the right
method to call, it's actually wrong for PCI devices. In particular,
in upstream Xen (and soon in RHEL-5 Xen), device_configure is actually
used to destroy a PCI device.
To fix the attach
problem I add a lookup into xenstore to see if the device we are
trying to attach already exists. To fix the detach problem I change
it so that for PCI detach (only), we use device_configure with the
appropriate sxpr to do the detachment.
* src/xen/xend_internal.c: don't use device_destroy for PCI devices
and fix the other issues.
* src/xen/xs_internal.c src/xen/xs_internal.h: add
xenStoreDomainGetPCIID()
Set up the types for the domainMemoryStats function and insert it into the
virDriver structure definition. Because of static initializers, update
every driver and set the new field to NULL.
* include/libvirt/libvirt.h.in: new API
* src/driver.h src/*/*_driver.c src/vbox/vbox_tmpl.c: add the new
entry to the driver structure
* python/generator.py: fix compiler errors, the actual python binding is
implemented later
* src/driver.h: add an extra entry point in the structure
* src/esx/esx_driver.c src/lxc/lxc_driver.c src/opennebula/one_driver.c
src/openvz/openvz_driver.c src/phyp/phyp_driver.c src/qemu/qemu_driver.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/vbox/vbox_tmpl.c src/xen/xen_driver.c: add NULL entry points for
all drivers
* src/xen/xm_internal.c (xenXMConfigGetULong): Remove useless and
misleading test (always false) for val->str == NULL before code that
always dereferences val->str. "val" comes from virConfGetValue, and
at that point, val->str is guaranteed to be non-NULL.
(xenXMConfigGetBool): Likewise.
* src/util/conf.c (virConfSetValue): Ensure that vir->str is never NULL,
not even if someone tries to set such a value via virConfSetValue.
This is trivial for QEMU since you just have to not stop the vm before
starting the dump. And for Xen, you just pass the flag down to xend.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): Add VIR_DUMP_LIVE.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Support live dumping.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support live dumping.
* tools/virsh.c (opts_dump): Add --live. (cmdDump): Map it to VIR_DUMP_LIVE.
This patch adds the --crash option (already present in "xm dump-core")
to "virsh dump". virDomainCoreDump already has a flags argument, so
the API/ABI is untouched.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): New flag for
CoreDump
* src/test/test_driver.c (testDomainCoreDump): Do not crash
after dump unless VIR_DUMP_CRASH is given.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Shutdown the domain
instead of restarting it if --crash is passed.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support --crash.
* tools/virsh.c (opts_dump): Add --crash.
(cmdDump): Map it to flags for virDomainCoreDump and pass them.
This patch fixes the bug where paused/running state is not
transmitted during migration. As a result, in the QEMU driver
for example the machine was always started on the destination
end.
In order to do so, just read the state and if it is appropriate and
set the VIR_MIGRATE_PAUSED flag.
* src/libvirt.c (virDomainMigrateVersion1, virDomainMigrateVersion2):
Automatically add VIR_MIGRATE_PAUSED when appropriate.
* src/xen/xend_internal.c (xenDaemonDomainMigratePerform): Give a nicer
error message when migration of paused domains is attempted.
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
xen-unstable changesets 20321 and 20521 added support for
description in xend domain config. This patch extends that
support in xend backend.
* src/xen/xend_internal.c: add parse and output of domain description
Xen HVM guests with PV drivers end up with two network interfaces for
each configured interface. One of them being emulated by qemu and the
other one paravirtual. As this might not be desirable, the attached
patch provides a way for users to specify that only paravirtual network
interface should be presented to the guest.
The configuration was inspired by qemu/kvm driver, for which users can
specify model='virtio' to use paravirtual network interface.
The patch adds support for model='netfront' which results in
type=netfront instead of type=ioemu (or nothing for newer xen versions)
in guests native configuration. Xen's qemu ignores interfaces with
type != ioemu and only paravirtual network device will be seen in the
guest.
Four possible configuration scenarios follow:
- no model specified in domain's XML
- libvirt will behave like before this change; it will set
type=ioemu for HVM guests on xen host which is not newer than
XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU
- covered by existing tests
- PV guest, any model
- no functional change, model is passed as is (and ignored by the
hypervisor)
- covered by existing tests (e.g., *-net-e1000.*)
- HVM guest, model=netfront
- type is set to "netfront", model is not specified
- covered by new *-net-netfront.* tests
- HVM guest, model != netfront
- type is set to "ioemu", model is passed as is
- covered by new *-net-ioemu.* tests
The fourth scenario feels like a regression for xen newer than
XEND_CONFIG_MAX_VERS_NET_TYPE_IOEMU as users who had a model specified
in their guest's configuration won't see a paravirtual interface in
their guests any more. On the other hand, the reason for specifying a
model is most likely the fact that they want to use such model which
implies emulated interface. Users of older xen won't be affected at all
as their xen provides paravirtual interface regardless of the type used.
- src/xen/xend_internal.c: add netfront support for the xend backend
- src/xen/xm_internal.c: add netfront support for the XM serialization too
