To prevent a confusion about missing chardev argument in qemu
command line add a note about that behavior into documentation.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1129198
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
(cherry picked from commit 242e8c5472)
virLockManager*New APIs are never called with
VIR_LOCK_MANAGER_USES_STATE. Moreover, lockd driver does not maintain
any state that would need to be transferred during migration and thus it
should not mention VIR_LOCK_MANAGER_USES_STATE at all.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
(cherry picked from commit 6beb75d96d)
Commit 5aee81a0 introduced a new test for disk-serial. The test fails
on i686 arch because there is no need to add "-cpu qemu32" to command
line. To fix the test update emulator in XML to "/usr/bin/qemu" so we
don't add the "-cpu qemu32" to command while running the test on i686 or
x86_64 host.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
(cherry picked from commit c2851781f1)
Commit 3e4b783e fixed an issue with RNG schema where this address type
was missing, this commit adds a test for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 6b22e0b562)
According to the POSIX standard, off_t (returned by lseek) is defined as
signed integral type no shorter than int. Because our offset variable is defined
as unsigned long long, the original check was passed successfully if UINT64_MAX had
been used as offset value, due to implicit conversion.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1177219
(cherry picked from commit 3fde7986d6)
According to docs, we only support 2 link states for an interface
up/down, 'up' being the default state if link state is unspecified in
domain's XML, so the message when no link state is provided should be
changed a little.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1141119
(cherry picked from commit d9c7f014ee)
When the domain's source disk type is network, if source protocol is rbd
or sheepdog, the 'if().. break' will end the current case, which lead to
miss check the driver type is raw or qcow2. Libvirt will allow to create
internal snapshot for a running domain with raw format disk which based
on rbd storage.
While both protocols support internal snapshots of the disk qemu is not
able to use it as it requires some place to store the memory image. The
check if the disk is backed by a qcow2 image needs to be executed
always.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179533
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
(cherry picked from commit f7c1410b0e)
We have this function networkObjFromNetwork() which for given
virNetworkPtr tries to find corresponding virNetworkObjPtr. If no
object is found, a nice error message is printed out:
no network with matching uuid '$uuid' ($name)
Let's improve the error message produced by networkLookupByUUID to
follow that logic.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit bf1afdd491)
https://bugzilla.redhat.com/show_bug.cgi?id=1197600
So, libvirt uses pid file to track pid of started qemus. Whenever
a domain is started, its pid is put into corresponding pid file.
The pid file path is generated based on domain name and stored
into domain object internals. However, it's not stored in the
status XML and therefore lost on daemon restarts. Hence, later,
when domain is being shut down, the daemon does not know which
pid file to unlink, and the correct pid file is left behind. To
avoid this, lets generate the pid file path again in
qemuProcessReconnect().
Reported-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 63889e0c77)
In commit edd1295e1d I've introduced an
XML element that allows to configure state of the network interface
link. Somehow the RNG schema hunk ended up in a weird place in the
network schema definition. Move it to the right place and add a test
case.
Note that the link state is set up via the monitor at VM startup so I
originally didn't think of adding a test case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1173468
(cherry picked from commit 8eb907b8d0)
Since adding the support for scheduler policy settings in commit
8680ea97, there are two enums with the same information. That was
caused by rewriting the patch since first draft.
Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 2fd5880b3b)
The problem here was that when opening a channel, we were checking
whether the channel given is alias (can't be NULL for running domain) or
it's name, which can be NULL (for example with spicevmc). In case of
such domain qemuDomainOpenChannel() made the daemon crash.
STREQ_NULLABLE() is safe to use since the code in question is wrapped in
"if (name)" and is more readable, so use that instead of checking for
non-NULL "vm->def->channels[i]->target.name".
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit b3ea0a8fb8)
https://bugzilla.redhat.com/show_bug.cgi?id=921426
Add to the man page a more complete description of what exactly the
command expects on input and will return on output based on what is
currently supported.
Perhaps missing findPoolSources implementations are backends for
sheepdog and rbd. Also missing any backend is zfs.
(cherry picked from commit 567bd0fa57)
The virStorageBackendISCSIFindPoolSources API only needs the 'host' name
in order to discover iSCSI pools, it returns the various device paths.
On input, it's also possible to further restrict a search by providing the
port attribute for the host element and the (undocumented) initiator element.
For example:
$ virsh find-storage-pool-sources-as iscsi
error: Failed to find any iscsi pool sources
error: invalid argument: hostname and device path must be specified for iscsi sources
$ virsh find-storage-pool-sources-as iscsi 192.168.122.1
<sources>
<source>
<host name='192.168.122.1' port='3260'/>
<device path='iqn.2013-12.com.example:iscsi-chap-lclpool'/>
</source>
</sources>
(cherry picked from commit 30f69ae86b)
https://bugzilla.redhat.com/show_bug.cgi?id=1070695
Modify the virsh man page to more accurately describe which values are
set by the virsh setmem and displayed by the virsh memtune or dominfo
based on the setmem command results.
(cherry picked from commit 69db32f93d)
Our documentation isn't 100% clear about hostdev 'managed' attribute usage,
because it only makes sense to use it with PCI devices, yet we format
this attribute to all hostdev devices. By adding a note into the docs,
we can possibly avoid confusion from customer's side and also avoid a solution
using ternary logic.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1155887
(cherry picked from commit ccfe9e4809)
Trying to use qemu:///session to create a storage pool pointing at
/tmp will usually fail with something like:
$ virsh pool-start tmp
error: Failed to start pool tmp
error: cannot open volume '/tmp/systemd-private-c38cf0418d7a4734a66a8175996c384f-colord.service-kEyiTA': Permission denied
If any volume in an FS pool can't be opened by the daemon, the refresh
fails, and the pool can't be used.
This causes pain for virt-install/virt-manager though. Imaging a user
downloads a disk image to /tmp. virt-manager wants to import /tmp as
a storage pool, so we can detect what disk format it is, and set the
XML correctly. However this case will likely fail as explained above.
Change the logic here to skip volumes that fail to open. This could
conceivably cause user complaints along the lines of 'why doesn't
libvirt show $ROOT-OWNED-VOLUME-FOO', but figuring that currently
the pool won't even startup, I don't think there are any current
users that care about that case.
https://bugzilla.redhat.com/show_bug.cgi?id=1103308
(cherry picked from commit 56476f6a2d)
When parsing XML, we validate the passed ostype + arch combo against
the detected hypervisor capabilities. This has led to the following
problem:
- Define x86 qemu guest
- qemu is inadvertently removed from the host
- libvirtd is restarted. fails to parse VM config since arch is removed
- 'virsh list --all' is now empty, user is wondering where their VMs went
Add a new internal flag VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS. Use
it when loading VM and snapshot configs from disk.
https://bugzilla.redhat.com/show_bug.cgi?id=1043572
(cherry picked from commit f1a89a8b6d)
If no <os><type> was specified:
before: unknown OS type no OS type
after : xml error: an os <type> must be specified
If an <os><type> is specified that's not in our capabiliities data:
before: unknown OS type: $type
after : unsupported configuration: no support found for os <type> '$type'
VIR_ERR_OS_TYPE is now unused (as it should be frankly) so drop its strings
as well to save our translators some effort.
(cherry picked from commit 3700c065cd)
Fedora doesn't ship OVMF/AAVMF builds in its repos due to licensing
issues, so the recommended way to consume these bits is via Gerd's
nightly repo: https://www.kraxel.org/repos
Let's teach fedora builds about the loader/nvram pairs these packages
installed, so users don't need to edit qemu.conf to get virt-manager
UEFI support.
(cherry picked from commit f93e121129)
QEMU 2.3 adds these new models to cover Haswell and Broadwell CPUs with
updated microcode. Luckily, they also reverted former the machine type
specific changes to existing models. And since these changes were never
released, we don't need to hack around them in libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
(cherry picked from commit c563b50605)
https://bugzilla.redhat.com/show_bug.cgi?id=1209948
So we have this bug. The virConnectGetDomainCapabilities() API
performs a couple of checks before it produces any result. One of
the checks is if the architecture requested by user can be run by
the binary (again user provided). However, the check is pretty
dumb. It merely compares if the default binary architecture
matches the one provided by user. However, a qemu binary can run
multiple architectures. For instance: qemu-system-ppc64 can run:
ppc, ppcle, ppc64, ppc64le and ppcemb. The default is ppc64, so
if user requested something else, like ppc64le, the check would
have failed without obvious reason.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 0af9325e6a)
The fake object is used to pass the domain name and UUID to the ACL code
for events where we don't have the full domain def when dispatching
events. The rest of the entries would be left uninitialized. While this
is not a problem code-wise as the used fields are initialized it looks
ugly in the debugger.
(cherry picked from commit 6ca857c7c8)
Don't unref the old identity unless we set the new one correctly and
unref the new one on failure to set it so that we don't leak any
references or use invalid pointers.
(cherry picked from commit ad886fa6c8)
- Remove all qemu emulators
- Restart libvirtd
- Install qemu emulators
- Call 'virsh version' -> errors
The only thing that will force the qemu driver to refresh it's cached
capablities info is an explict API call to GetCapabilities.
However in the case when the initial caps lookup at driver connect didn't
find a single qemu emulator to poll, the driver is effectively useless
and really can't do anything until it's populated some qemu capabilities
info.
With the above steps, the user would have to either know about the
magic refresh capabilities call, or restart libvirtd to pick up the
changes.
Instead, this patch changes things so that every time a part of th
driver requests access to capabilities info, check to see if
we've previously seen any emulators. If not, force a refresh.
In the case of 'still no emulators found', this is still very quick, so
I can't think of a downside.
https://bugzilla.redhat.com/show_bug.cgi?id=1000116
(cherry picked from commit 95546c43de)
(cherry picked from commit 9ebc1631b4)
==19015== 968 (416 direct, 552 indirect) bytes in 1 blocks are definitely lost in loss record 999 of 1,049
==19015== at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015== by 0x52ADF14: virAllocVar (viralloc.c:560)
==19015== by 0x5302FD1: virObjectNew (virobject.c:193)
==19015== by 0x1DD9401E: virQEMUDriverConfigNew (qemu_conf.c:164)
==19015== by 0x1DDDF65D: qemuStateInitialize (qemu_driver.c:666)
==19015== by 0x53E0823: virStateInitialize (libvirt.c:777)
==19015== by 0x11E067: daemonRunStateInit (libvirtd.c:905)
==19015== by 0x53201AD: virThreadHelper (virthread.c:206)
==19015== by 0xA1EE1F2: start_thread (in /lib64/libpthread-2.19.so)
==19015== by 0xA4EFC8C: clone (in /lib64/libc-2.19.so)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 225aa80246)
The current auto-indentation buffer code applies indentation only on
complete strings. To allow adding a string containing newlines and
having it properly indented this patch adds virBufferAddStr.
(cherry picked from commit 6ff59cbc83)
Add virStringHasControlChars that checks if the string has
any control characters other than \t\r\n,
and virStringStripControlChars that removes them in-place.
(cherry picked from commit 2a530a3e50)
# virsh -c lxc:/// start helloworld
error: Failed to start domain helloworld
error: internal error: guest failed to start: Unknown
failure in libvirt_lxc startup
Return success when there are no cpuset.mems to be set,
instead of failing without setting an error.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
(cherry picked from commit 930e8697a5)
# virsh -c lxc:/// start helloworld
error: Failed to start domain helloworld
error: internal error: guest failed to start: Invalid value '1-3'
for 'cpuset.mems': Invalid argument
Free the cpu mask to avoid reusing it as a mem mask
in virCgroupSetCpusetMems
if virDomainNumatuneMaybeFormatNodeset does not set a mask.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
(cherry picked from commit 461eafecfa)
https://bugzilla.redhat.com/show_bug.cgi?id=1212620
Commit a0670ae caused a regression in 'virsh event' and
'virsh qemu-monitor-event' - if a user tries to filter the
command to a specific domain, an error message is printed:
$ virsh event dom --loop
error: internal error: virsh qemu-monitor-event: no domain VSH_OT_DATA option
and then the command continues as though no domain had been
supplied (giving events for ALL domains, instead of the
requested one). This is because the code was incorrectly
assuming that all "domain" options would be supplied via a
mandatory VSH_OT_DATA, even though "domain" is optional for
these two commands, so we had changed them to VSH_OT_STRING
to quit failing for other reasons (ever since it was decided
that VSH_OT_DATA and VSH_OT_STRING should no longer be
synonyms).
In looking at the situation, though, the code for looking up
a domain was making a pointless check for whether the option
exists prior to finding the option's string value, as
vshCommandOptStringReq does just fine at reporting any errors
when looking up a string whether or not the option was present.
So this is a case of regression fixing by pure code deletion :)
* tools/virsh-domain.c (vshCommandOptDomainBy): Drop useless filter.
* tools/virsh-interface.c (vshCommandOptInterfaceBy): Likewise.
* tools/virsh-network.c (vshCommandOptNetworkBy): Likewise.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh.h (vshCmdHasOption): Drop unused function.
* tools/virsh.c (vshCmdHasOption): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 31ef0836a7)
$ sudo virsh change-media f19 hdc /mnt/data/devel/media/Fedora-16-x86_64-Live-KDE.iso
succeeded to complete action update on media
Change the message to:
Successfully {inserted,ejected,changed} media.
https://bugzilla.redhat.com/show_bug.cgi?id=967946
(cherry picked from commit e3aa4c91c8)
https://bugzilla.redhat.com/show_bug.cgi?id=1200149
Even though we have a mutex mechanism so that two clients don't spawn
two daemons, it's not strong enough. It can happen that while one
client is spawning the daemon, the other one fails to connect.
Basically two possible errors can happen:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': Connection refused
or:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': No such file or directory
The problem in both cases is, the daemon is only starting up, while we
are trying to connect (and fail). We should postpone the connecting
phase until the daemon is started (by the other thread that is
spawning it). In order to do that, create a file lock 'libvirt-lock'
in the directory where session daemon would create its socket. So even
when called from multiple processes, spawning a daemon will serialize
on the file lock. So only the first to come will spawn the daemon.
Tested-by: Richard W. M. Jones <rjones@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit be78814ae0)
While this thread is cleaning up the client and connection objects:
#2 virFileReadAll (path=0x7f28780012b0 "/proc/1319/stat", maxlen=maxlen@entry=1024, buf=buf@entry=0x7f289c60fc40) at util/virfile.c:1287
#3 0x00007f28adbb1539 in virProcessGetStartTime (pid=<optimized out>, timestamp=timestamp@entry=0x7f289c60fc98) at util/virprocess.c:838
#4 0x00007f28adb91981 in virIdentityGetSystem () at util/viridentity.c:151
#5 0x00007f28ae73f17c in remoteClientFreeFunc (data=<optimized out>) at remote.c:1131
#6 0x00007f28adcb7f33 in virNetServerClientDispose (obj=0x7f28aecad180) at rpc/virnetserverclient.c:858
#7 0x00007f28adba8eeb in virObjectUnref (anyobj=<optimized out>) at util/virobject.c:265
#8 0x00007f28ae74ad05 in virNetServerHandleJob (jobOpaque=<optimized out>, opaque=0x7f28aec93ff0) at rpc/virnetserver.c:205
#9 0x00007f28adbbef4e in virThreadPoolWorker (opaque=opaque@entry=0x7f28aec88030) at util/virthreadpool.c:145
In stack frame #6 the client->identity object got unref'd, but the code
that removes the event callbacks in frame #5 did not run yet as we are
trying to obtain the system identity (frames #4, #3, #2).
In other thead:
#0 virObjectUnref (anyobj=anyobj@entry=0x7f288c162c60) at util/virobject.c:264
klass = 0xdeadbeef
obj = 0x7f288c162c60
#1 0x00007f28ae71c709 in remoteRelayDomainEventCheckACL (client=<optimized out>, conn=<optimized out>, dom=dom@entry=0x7f28aecaafc0) at remote.c:164
#2 0x00007f28ae71fc83 in remoteRelayDomainEventTrayChange (conn=<optimized out>, dom=0x7f28aecaafc0, ... ) at remote.c:717
#3 0x00007f28adc04e53 in virDomainEventDispatchDefaultFunc (conn=0x7f287c0009a0, event=0x7f28aecab1a0, ...) at conf/domain_event.c:1455
#4 0x00007f28adc03831 in virObjectEventStateDispatchCallbacks (callbacks=<optimized out>, ....) at conf/object_event.c:724
#5 virObjectEventStateQueueDispatch (callbacks=0x7f288c083730, queue=0x7fff51f90030, state=0x7f288c18da20) at conf/object_event.c:738
#6 virObjectEventStateFlush (state=0x7f288c18da20) at conf/object_event.c:816
#7 virObjectEventTimer (timer=<optimized out>, opaque=0x7f288c18da20) at conf/object_event.c:562
#8 0x00007f28adb859cd in virEventPollDispatchTimeouts () at util/vireventpoll.c:459
Frame #0 is unrefing an invalid identity object while frame #2 hints
that the client is still dispatching the event.
For untrimmed backtrace see the bugzilla attachment.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1203030
(cherry picked from commit a98129c0ee)
