Added to 'query-command-line-options' in qemu commit 5559716c98
("util/qemu-config: Add loadparm to qemu machine_opts") released in
qemu-v2.10.0 but makes sense for s390 only. Treat it the same as the
keywrap capabilities in previous commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu introduced these options in 2eb1cd0768 ("s390x: CPACF: Handle key
wrap machine options") released in qemu-v2.3.0 but was exposed in
query-command-line-options only in 5bcfa0c543 ("util/qemu-config: fix
missing machine command line options").
The problem is that they are exposed even for architectures which don't
actually in fact support those.
Make the two capabilities a bit more useful by assuming them only on
s390 and thus removing them from other arches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code assumes that the feature tracked by this capability always
exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Supported since qemu commit 8490fc78e7 ("add -machine mem-merge=on|off
option") released in qemu-v1.3.0 and can't be compiled out.
Assume that it's present and remove the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code assumes that the feature tracked by this capability always
exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Supported since qemu commit 3d3b8303c6 ("showing a splash picture when
start") released in qemu-v1.0 and can't be compiled out.
Assume that it's present and remove the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The feature is now always present. Remove the negative test case as the
upcomming commit will remove the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code assumes that the feature tracked by this capability always
exists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Supported since ac05f34924 ("add a boot parameter to set reboot
timeout") released in qemu-v1.3.0 and can't be compiled out.
Assume that it's present and remove the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions now support this feature so this test is
pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Added by c8a6ae8bb9 in qemu-v1.5.0 and can't be compiled out. Assume
that it's present and fix all fake-caps tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Of the two callers one simply iterates over the returned paths and the
second one appends the returned paths to another linked list. Simplify
all of this by directly returning a linked list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The option "queue-size" in virtio-blk was added in qemu-2.12.0, and
default value increased from qemu-5.0.0.
However, increasing this value may lead to drop of random access
performance.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To support virtio-blk queue-size option, this commit adds capability
detection to the option.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently disk-virtio-queues test is now using specifying a fake
capability.
By this commit this test will make use of DO_TEST_CAPS_LATEST.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These are no longer referenced by any existing test as of:
os-firmware-invalid-type -> a9b1375d7d
tseg-explicit-size -> 604990a175
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since we no longer use '-device sga' we can stop probing for this device
in our capabilities code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
SeaBIOS >= 1.11 has built-in support for outputting to the serial
console when QEMU sets -M graphics=off. Our minimum QEMU version
is 2.11.0, which bundled SeaBIOS 1.11. Thus we have no need to
use '-device sga' anymore.
This change results in a slight layout difference for option ROMs
in memory, however, it does not affect the migration data stream
format on the wire and once migration is complete the target QEMU
memory layout for ROMs matches the source QEMU once again.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are important security implications when we'd misprobe those
images. This commit reinstates the tests removed by commit 979d1ba3ae
since 'qemu-img' refused to format them.
With the new testing approach with stored images we won't run into that
problem.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Improve the error message and abort the test. Continuing here is not
desired as without chdiring into the appropriate directory the test
would fail anyways and worse could attempt stat-ing random files on the
host.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have plenty of other work to do in this test. Skip only the real
image testing case when we can't find qemu-img or it failed to format
the image.
This allows us to also remove the last global variable in the test and
move the creation and cleanup of the images closer to the actual test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare the test runner for skipping individual tests if images can't be
formatted rather than the whole virstoragetest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions have the parameter, so we don't need to
check. This allows us to simplify the code used for formating real
images for virstoragetest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Create it with the appropriate backing file path rather than using
another instance of 'qemu-img rebase'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For testing of real images formatted by 'qemu-img' it's now sufficient
to format them once without the need to rewrtie them since we use the
real images only for testing of one scenario.
This allows us to also remove most of the global variables holding the
path to the images which was necessary when they were being rewritten.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have 3 test cases for this currently:
1) "qcow2->raw"
1.1) VIR_STORAGE_FILE_QCOW2 as top level format
1.2) VIR_STORAGE_FILE_AUTO as top level format
2) "wrap->qcow2->raw" whith just VIR_STORAGE_FILE_QCOW2
This patch adds also testing of VIR_STORAGE_FILE_AUTO for case 2) and
removes both 1) subcases as they are being actually tested as part of
2).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use prepared test images instead to simplify and clarify the code
instead of rewriting existing images multiple times.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've already added a 'raw' file to the example image directory so we
can use that instead of formatting one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous ones, this one doesn't need to be created by
qemu-img in order for the test to make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QED format isn't really being developed any more. Use a
pre-formatted image to test the existing code. In this instance we
switch to using a relative backing path for simplicity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't need a special directory for the tests. Reuse the directory
holding the data for the virstoragetest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Provide the images for the self and mutual backing image loop cases in
the repository rather than formatting them with qemu-img.
This makes the code more readable and also decouples the backing chain
tests from each other.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using 'qemu-img' and rewriting the chain we can use fake
data and few empty files to ensure the same level of coverage. This is
possible since we've already tested that the metadata parsing from files
works properly and the only thing we are testing here is that the
symlink resolution works properly.
Additionally after the refactor of 'virstoragetest' is complete
additional tests on real data will be added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Passing in both "chain*" and "chain*->path" is pointless. Use only the
full struct which we can use to infer the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The TEST_CHAIN cases were storing the expected output (or rather data
to generate the expected output) in code. This made the code really hard
to follow and even harder to modify to add new cases.
This patch modifies the code to store the expected output in text files
(using the same generator as we've used to) and uses
'virTestCompareToFile' to check the outputs.
The result is that the code is way simpler and doesn't require fiddling
with 'testFileData' structs when adding new cases. Additionally this
removes mixing of code and declaration so we can stop disabling the
warning for this file.
Another advantage is that the tests are now named so it's easier to
figure out if one of them breaks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain cases we want to be able to compare test output containing
real paths against a static output file and thus we need a helper which
strips srcdir/builddir from given path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now have specific tests for the backing store parser and previous
tests cover the extraction of the backing store string so there's no
need for these particular tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now have specific tests for the backing store parser and previous
tests cover the extraction of the backing store string so there's no
need for these particular tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Cover the case of missing disk target to cover the case fixed by
previous commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The validation infrastructure doesn't modify the definition and
additionally it makes sense to run the global code first as it's
validating certain corner cases.
The changed error messages from qemuxml2argvtest show that this is
indeed the proper ordering as all changed messages are actually better
describing the error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reduce variable scope, use g_auto and remove pointless labels.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reduce variable scope to match their lifetime,
use g_auto and remove now pointless labels in favor
of direct returns.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use g_auto where possible and remove the pointless label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Although I'm sure we all know the powers of two by heart now,
this is the prevalent style for flag defition.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As of qemu commit:
commit 497a30dbb065937d67f6c43af6dd78492e1d6f6d
qemu-img: Require -F with -b backing image
creating images with backing images requires specifying the format.
Remove tests which do not pass the backing format on the command
line.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In qemumigrationcookiexmltest and qemustatusxml2xmltest there is
@cfg variable that is unused. It's set via virQEMUDriverGetConfig()
but then never used. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The '-no-shutdown' flag prevents qemu from terminating if a shutdown was
requested. Libvirt will handle the termination of the qemu process
anyways and using this consistently will allow greater flexibility for
the virDomainSetLifecycleAction API as well as will allow using
the 'system-reset' QMP command during startup to reinitiate devices
exported to the firmware.
This efectively partially reverts 0e034efaf9
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The original idea was to ensure that the destination has the same
original state of the '-no-reboot' flag to ensure identical behaviour of
the 'vidDomainModifyLifecycleAction' API.
With newer qemu's we'll be able to modify the behaviour using the
monitor so old daemons won't be able to keep up anyways.
Remove this feature as it's not very useful and will be replaced by a
proper solution.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patches will modify how '-no-reboot' is handled when qemu
supports the 'set-action' QMP command. Add a test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'set-action' QMP command allows modifying the behaviour when the
guest resets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This one will be slightly unstable given that CPU features are being
modified frequently in qemu especially when used with a modern cpu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The host model expansion depends on the capability data, so in this case
it makes sense to have specific invocations of the test for all qemu
versions we have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to q35 in anticipation of using DO_TEST_CAPS* in further patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the larger number in the original test to avoid having two files.
Additionally this avoids use of 'host-model' with DO_TEST_CAPS_LATEST in
cases when it isn't necessary for the purpose of the test as the CPU
model tends to change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case doesn't really test anything about the specific CPU. Using
a host-model cpu with DO_TEST_CAPS_LATEST results in commandline changes
every time qemu updates the cpu definiton.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I removed negation from the name of a variable to make the code
more readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This essentially reverts:
commit ca5c8e1dc7
qemuxml2argvtest: Avoid conditions in test macro
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A helper that resets the log before each test and prints
it on failure.
It also takes the return variable as an argument,
so it can be used to eliminate number of branches
the compiler has to consider in the main function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor to use automatic cleanup and remove the goto's.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'PARSE' macro does not use '#' or '##' directives,
or anything from outside of the macro other than the
cleanup label.
Turn it into a function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that it uses virnetdevbandwidthmock which we only
build on Linux.
Fixes: eb55e8a897
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need to know if validation flag is present in order to
validate given XML against schema in virXMLParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Refactor qemuTestParseCapabilitiesArch to use g_auto for cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Refactor testQemuGetCaps to use g_auto for cleanup,
remove the error label and use g_steal_pointer for
the successful return path.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Test virNetDevOpenvswitchInterfaceSetQos and
virNetDevOpenvswitchInterfaceClearQos with dryrun method.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 42b2f35d36 was meant to test all four combinations of
serial-pipe-{server,client}-{app,vm} files, but did only add the files and by
mistake duplicated the tests. Those were later removed as duplicates, so add
them back in.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These XMLs live in a separate directory, there's no need for them
to have a special prefix in addition. Dinding proper file based on
vmx2xmltest.c is also needlessly complicated.
The steps used for mass rename are similar to v4.0.0-rc1~186.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In majority of DO_TEST() and DO_TEST_FAIL() calls the input vmx
file name is the same as the output XML file. Therefore, it's not
necessary to provide the same string twice. For the rest, where
the output XML file is different we can use symlinks to the
expected output.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are three test cases are called twice. This is needless.
Drop redundant calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add a '--split' switch for the 'virsh echo' command and add few test
cases to the virshtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Escaping for both shell and XML makes no sense. Use one at time so that
we can forbid use of both.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass a pointer to the 'ret' variable to the test executor itself and
update it there to improve compile times of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass a pointer to the 'ret' variable to the test executor itself and
update it there to improve compile times of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously we've ran into problems when 'testQemuInfoSetArgs' failed as
calling the actual test executor could lead to a crash if the data
wasn't prepared but reporting an error doesn't play nicely with our test
output which is handled by 'virTestRun'.
To avoid the issue (and as a side effect improve compilation times of
the test files) split up testQemuInfoSetArgs into two functions.
The first is still called 'testQemuInfoSetArgs' and just blindly
populates arguments into a sub-struct of testQemuInfo. This function no
longer reports errors
A new function 'testQemuInfoInitArgs' which is meant to be called from
the test executor then checks errors and prepares the test data. This
one can fail and the test will be marked as failed appropriately.
A nice side effect is that this vastly improves compile times of
qemuxml2xmltest and qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We pass multiple caching objects to individual tests which don't change.
To prevent always having to pass them individually to
'testQemuInfoSetArgs' introduce 'struct testQemuConf' which will hold
all of them and just the struct will be passed to the tests.
Additionally this will make the conf available from inside the test run.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the last patch removed the hack which needed lookahead to see
whether all QEMU_CAPS_ were parsed we can move the fetching of the
arguments into the loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The callers don't use it any more. Remove it to avoid fragility of the
test suite.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both are used in the same parser. Using offset values ensures that
errors are caught earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This reduces the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since qemuCaps are now always allocated we don't need to pass
ARG_QEMU_CAPS, QEMU_CAPS_LAST to force the allocation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'DO_TEST_FULL' isn't a useful wrapper any more. Use the better name for
the main macro and replace all uses.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This removes the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This reduces the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a explicit version of our test invocation macro for tests which use
no capabilities.
This reduces the usage of the somewhat anonymous 'NONE' macro and will
lead to simplification of the code later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'DO_TEST_FULL' isn't a useful wrapper any more. Use the better name for
the main macro and replace all uses.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'DO_TEST_FULL' macro was ending the argument list which was being
started in other macros. Move it so that 'ARG_QEMU_CAPS' and
'QEMU_CAPS_LAST' are always used in the same macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since qemuCaps are now always allocated we don't need the hack.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the logic so that 'info->qemuCaps' is populated, but empty even
when ARG_QEMU_CAPS was not used. The function still retains the
interlocking of fake caps with real caps.
A lot of the internal code expects qemuCaps to be populated and many
tests work this around by using ARG_QEMU_CAPS with no caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The string "aarch64" is passed in place of capability flags. We were lucky
that the pointer was always more than QEMU_CAPS_LAST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The string "ppc64" is passed in place of capability flags. We were lucky
that the pointer was always more than QEMU_CAPS_LAST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions have this option so there's no need for us
to base it on the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All QEMU versions we support have these and it's very unlikely that they
will be removed. Remove the capability checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All modern qemus support sandboxing so this is covered by other tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The feature is supported by all supported qemu versions thus covered
thoroughly by other test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test is now pointless since we always assume that this option is
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions have all the fields so we can remove the
booleans controlling which fields are used on the monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They are no longer used as we now assume that all tuning caps are
present and in case some will be removed we'll need to use different
probing methods.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it more obvious that we care about passing FDs on the commandline
before startup of qemu, which is used to avoid startup monitor polling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will always add the property so the negative tests would
stop working.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add g_autofree to functions changed in previous commits doing
g_auto cleanup for libxml2-related variables, where it could
lead to removal of a label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Libvirt assumes that a SCSI bus can fit up to 8 devices
(including controller itself), except for so called wide bus
which can accommodate up to 16 devices (again, including
controller). This plays important role when computing 'drive'
address in virDomainDiskDefAssignAddress(). So far, the only
driver that enables wide SCSI bus is VMX. But with newer
releases, ESX is capable of "super wide" bus (64 devices).
We can blindly bump the limit in our code because then we would
compute address that's invalid for older ESX versions that we
still want to support.
Unfortunately, I haven't found a better place where to store this
than virDomainDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is an attachment from the following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1738392
Notice that .vmx file has two scsi disks, but only one is
reported in the XML. This will be fixed later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing for the 'qemuMonitorTest' object and the
list of keys so that the cleanup section can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unfortunately, mdevctl supports defining more than one mdev with the
same UUID as long as they have different parent devices. (Only one of
these devices can be active at any given time).
This means that we can't use the UUID alone as a way to uniquely
identify mdev node devices. Append the parent address to ensure
uniqueness. For example:
Before: mdev_88a6b868_46bd_4015_8e5b_26107f82da38
After: mdev_88a6b868_46bd_4015_8e5b_26107f82da38_0000_00_02_0
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1979440
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This can be used similarly to other postparse callbacks in libvirt --
filling in additional information that can be determined by using the
information provided in the XML. In this case, we determine the address
of the parent device and cache it in the mdev caps so that we can use it
for generating a unique name and interacting with mdevctl.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, this is only for mediated devices. When a new mediated
device is created or defined, the xml is expected specify the nodedev
name of an existing device as its parent. We were not previously
validating this and were simply accepting any string here.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 51fbbfdce8 attempted to get the proper nodedev name for the
parent of an defined mdev by traversing the filesystem and looking for a
device that had the appropriate sysfs path. This works, but it would be
cleaner to to avoid mucking around in the filesystem and instead just
just examine the list of devices we have in memory.
We already had a function nodeDeviceFindAddressByName() which constructs
an address for parent device in a format that can be used with mdevctl.
So if we refactor this function into a a function that simply formats an
address for an arbitrary virNodeDeviceObj*, then we can use this
function as a predicate for our new virNodeDeviceObjListFind() function
from the previous commit. This will search our list of devices for one
whose address matches the address we get from mdevctl.
One nice benefit of this approach is that our test cases will now
display xml output with the proper parent name for mdevs (assuming that
we've added the appropriate mock parent devices to the test driver).
Previously they just displayed 'computer' for the parent because the
alternative would have required specially constructing a mock filesystem
environment with a sysfs that mapped to the appropriate parent.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
VIR_APPEND_ELEMENT doesn't report any errors now so we can remove
VIR_APPEND_ELEMENT_QUIET and replace all uses by VIR_APPEND_ELEMENT
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now it was an alias to VIR_APPEND_ELEMENT. Use virAppendElement
directly until VIR_APPEND_ELEMENT is refactored too and we'll be able to
get rid of VIR_APPEND_ELEMENT_QUIET completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT_COPY which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are cpu definitions that are allocated in
qemuTestDriverInit() but are missing corresponding
virCPUDefFree() call in qemuTestDriverFree(). It's safe to call
the free function because the definitions contain a refcounter
and thus even if they were still in use the refcounter would be
just decreased.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with QEMU 6.0, this controller is enabled by default
on aarch64.
https://bugzilla.redhat.com/show_bug.cgi?id=1967187
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to test the virDomainGetMessages for test driver, we need to
check some taints or deprecations, so introduce testDomainObjCheckTaint
for checking taints.
As we introduced testDomainObjCheckTaint for test driver, the `dominfo`
command in virshtest will now print tainting messages, so add them for
test.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In virTestMain() the @failedTests bitmap is allocated and
optionally @testBitmap too. But neither of them is freed.
Fixes: 0cd5a726e3
Fixes: cebb468ef5
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to pass the 'trim' requests through the copy-on-read filter so
if a user configures a discard policy on the disk the requests get
through to the appropriate format layer in the blockdev tree.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1986509
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
I've noticed the test being skipped in my build scenario (tmpfs) and
the output doesn't make it clear why it's happening.
Add debug statements for the various return values of
testUserXattrEnabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Base it on the presence of the "blockdev-reopen" QMP command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Export 'qemuBlockReopenFormatMon' and use it in a new test case wich
will validate the arguments against the QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Update to v6.1.0-rc0-48-g7b7ca8ebde
Notable changes are:
- stabilization of 'blockdev-reopen'
- addition of the 'vmx-tsc-scaling' cpu flag
- Supported display types are now in the schema only if they are compiled in.
- rbd image encryption
- 'aio-max-batch' iothread property
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add support for customizable grabToggle key combinations with
<input type='evdev'>.
Signed-off-by: Justin Gatzen <justin.gatzen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit e9b534905f introduced an error when parsing an empty list
returned from mdevctl.
This occurs e.g. if nodedev-undefine is used to undefine the last
defined mdev which causes the following error messages
libvirtd[33143]: internal error: Unexpected format for mdevctl response
libvirtd[33143]: internal error: failed to query mdevs from mdevctl:
libvirtd[33143]: mdevctl failed to updated mediated devices
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
It is actually not needed because in qemuxml2argvtest we preload
domaincapsmock as well.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need to mock virQEMUCapsGetKVMSupportsSecureGuest only if compiling
with QEMU otherwise compilation will fail with error:
/usr/lib/gcc/i686-w64-mingw32/11.1.1/../../../../i686-w64-mingw32/bin/ld: tests/libdomaincapsmock.dll.p/domaincapsmock.c.obj: in function `virQEMUCapsGetKVMSupportsSecureGuest':
/builds/libvirt/libvirt/build/../tests/domaincapsmock.c:40: undefined reference to `virQEMUCapsGet'
/usr/lib/gcc/i686-w64-mingw32/11.1.1/../../../../i686-w64-mingw32/bin/ld: /builds/libvirt/libvirt/build/../tests/domaincapsmock.c:41: undefined reference to `virQEMUCapsGet'
Fixes: 248a30c0c0
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I have added 2 new macros to call tests which are expected to
fail in order to make the code more consistent and readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Having negation in a name of a bool variable seems a bit
confusing to me. I think the substitution makes the code much
more readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the common id 'lsec0' for all launchSecurity types in the QEMU
command line construction.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Adding availability of s390-pv in domain capabilities and adjust tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add launch security type 's390-pv' as well as some tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
I changed DO_TEST_DIFFERENT to DO_TEST, which allows us to remove
the duplicate out file. I also added id attribute for domain
element in order to parse it as a live XML ('cachetune id' is in
the output of only live XMLs). Lastly I added id of cachetune to
test its output value.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As test driver won't have real background job running, in order to get
all possible states, the time is used here to decide which state to be
returned. The default time will get `ok` as return value.
Note that using `virsh domtime fc4 200` won't take effect for the test
driver, to get other states, you have to enter virsh interactive
terminal and set time.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Inactive mdevs were simply formatting their parent name as the value
received from mdevctl rather than looking up the libvirt nodedev name of
the parent device. This resulted in a parent value of e.g.
'0000:5b:00.0' instead of 'pci_0000_5b_00_0'. This prevented defining a
new mdev device from the output of nodedev-dumpxml.
Unfortunately, it's not simple to fix this comprehensively due to the
fact that mdevctl supports defining (inactive) mdevs for parent devices
that do not actually exist on the host (yet). So for those persistent
mdev definitions that do not have a valid parent in the device list, the
parent device will be set to the root "computer" device.
Unfortunately, because the value of the 'parent' field now depends on
the configuration of the host, the mdevctl parsing test will output
'computer' for all test devices. Fixing this would require a more
extensive mock test environment.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1979761
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Having multiple addresses having same hostname is a common config either
to have IPv4 and IPv6 address for the same hostname or even for DNS
round robin. The validation in the network update code didn't allow
adding such entries despite the fact that it is possible to define a
network with them.
Don't check hostname duplicity when adding a DNS entry.
The update of the test case adds another entry for the 'pudding'
hostname which is added in one of the networkxml2xmlupdate test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Having multiple addresses for the same hostname is a legitimate
configuration in DNS. Add test data to cover this case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When users register the threshold event for the top level image with an
explicit index (e.g. vda[3]) they are clearly expecting the index in the
event.
This flag will help avoiding emission of the second event without the
index when the client clearly requested one with the index.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When seeing a guest with a sound device, and no audio backend, we
automatically add an audio backend XML element based on the historical
QEMU driver behaviour. Unfortunately when we live migrate back to an
old libvirt, it may not understand the audio driver type we configured.
We thus need to strip the default audio backend when migrating.
Fixes https://gitlab.com/libvirt/libvirt/-/issues/179
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Turns out, when introducing HMAT support in v6.6.0-rc1~249
I've forgot to allow "cache" attribute for <bandwidth/> element
in RNG. It's parsed and formatted, but schema does not allow it.
Fixes: a89bbbac86
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1980162
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If guest is configured to use memfd then the function that build
memory-backend-* part of command line will put
memory-backend-memfd, always. Even for NVDIMMs. This is not
correct, because NVDIMMs need a backing path (usually to a real
host NVDIMM device). Therefore, regardless of memfd being
requested, we have to stick with memory-backend-file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When constructing guest name for machined we have to be very
cautious as machined expects a name that's basically a valid URI.
Therefore, if there's a dot it has to be followed by a letter or
a number. And if there's a sequence of two or more dashes they
should be joined into a single dash. These rules are implemented
in virDomainMachineNameAppendValid(). There's the @skip variable
which is supposed to track whether it is safe to append a dot or
a dash into name. However, the variable is set to false (meaning
it is safe to append a dot or a dash) even if the current
character we are processing is not in the set of allowed
characters (and thus skipped over).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1948433
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Due to a rather unfortunate misunderstanding, we were parsing the list
of defined devices from mdevctl incorrectly. Since my primary
development machine only has a single device capable of mdevs, I
apparently neglected to test multiple parent devices and made some
assumptions based on reading the mdevctl code. These assumptions turned
out to be incorrect, so the parsing failed when devices from more than
one parent device were returned.
The details: mdevctl returns an array of objects representing the
defined devices. But instead of an array of multiple objects (with each
object representing a parent device), the array always contains only a
single object. That object has a separate property for each parent
device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is possible to define/edit(in shut off state) a domain XML with
same hostdev device repeated more than once, as shown below. This
behavior is not expected. So, this patch fixes it.
vser1:
<domain type='kvm'>
[...]
<devices>
[...]
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0005'/>
</hostdev>
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0006'/>
</hostdev>
[...]
</devices>
</domain>
$ virsh define vser1
Domain 'vser1' defined from vser1
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already reject TPM 1.2 in a number of scenarios; let's add
ARM virt guests to the list.
https://bugzilla.redhat.com/show_bug.cgi?id=1970310
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of providing the configuration explicitly, let libvirt
fill in the blanks. After the recent changes, this results in a
working configuration without the need for user input.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to change the input file later, and having this
additional coverage will demonstrate that such a change does not
alter the behavior.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update the caps data for the upcoming qemu version.
Notable changes are:
- 'query-sev-attestation-report' command added
- 'sample-pages' members for dirty rate calculation added
- 'qtest' device added
- 'share' member added to query-memdev and 'reserve' members added to
query-memdev/memory-backend-[file,memfd,ram]
- 'qemu-vdagent' chardev added
- 'mptcp' toggle added to inet servers
- 'zstd' compression for qcow2
- new cpu models: - "Snowridge-v3"
- "Skylake-Server-v5"
- "Skylake-Client-v4"
- "Icelake-Server-v5"
- "Icelake-Client-v3"
- "Dhyana-v2"
- "Denverton-v3"
- "Cooperlake-v2"
- "Cascadelake-Server-v5"
- 'avx-vnni' added to some existing cpu models
- 'model-id' is now being reported as the host cpu again rather than
QEMU TCG as I've noted in previous bump
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that the minimum supported Xen version has bumped to 4.9, all
uses of LIBXL_HAVE_* that are included in Xen 4.9 can be removed
from the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Next commit will modify the code so that it validates whether
egl-headless is present. Certain tests need to get the egl-headless
capability to keep working properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
egl-headless graphics can be compiled out in qemu so we need to be able
to know whether the given qemu version support it.
Base the capability on the presence of the 'egl-headless' member in
'query-display-options' or imply it if 'query-display-options' is not
supported as we implied it before for all versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When adding support for externally launched virtiofsd,
I was too liberal and did not require a target.
But the target is required, because it's passed to the
QEMU device, not to virtiofsd.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: 12967c3e13
Fixes: 56dcdec1ac
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's just one caller who cares (testQemuMonitorJSONGetTPMModels). Fix
it and remove the counting of elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory freeing and remove the cleanup section.t
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_auto(GStrv) for clearing the string list and thus remove the
'cleanup' section and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Next commit will modify the code so that it validates whether SDL is
present. Certain tests need to get the SDL capability to keep working
properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
SDL graphics can be compiled out in qemu so we need to be able to know
whether the given qemu version support it.
Base the capability on the presence of the 'sdl' member in
'query-display-options' or imply it if 'query-display-options' is not
supported as we implied it before for all versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The command allows to query various display-related options. The absence
of the command will be used to imply certain video-related capabilities
before we would be able to detect them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Base the check on the logic from qemuDomainCheckCCWS390AddressSupport,
which will be removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag isn't used by the code in any way so it can be dropped from the
legacy test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Give the test QEMU_CAPS_CCW instead of QEMU_CAPS_VIRTIO_S390 since the
latter can never be asserted any more. This preserves what the tests
wants to check so that QEMU_CAPS_VIRTIO_S390 can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The devices no longer exist in qemu since the 2.6 release. Drop the
probing of the device properties and fix the data for
qemucapabilitiestest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The machine type was removed in qemu 2.6 and no tests now depend on it.
Remove the faking of the machine type support and the capabilities test
for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Use the more modern s390-ccw-virtio machine type and use
VIR_TEST_CAPS_ARCH_LATEST to invoke it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't use the 's390-virtio' machine which was removed in qemu 2.6 and
use real capabilities for the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Use the more modern s390-ccw-virtio machine type and use
VIR_TEST_CAPS_ARCH_LATEST to invoke it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the console, disk, and network test for the legacy s390 machine
which was removed in qemu 2.6. All of these have 'ccw' equivalents.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Modernize the test for sclp console since there isn't any other test for
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Modernize the test for diag288 since there isn't any other test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The switch to internal linebreaking of arguments caused a problem when
generating .args files with VIR_TEST_REGENERATE_OUTPUT as the last
argument isn't terminated with a newline.
Switch to using virCommandToStringBuf and append a newline.
Fixes: 0046e0b1c2
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
