From man poll(2), poll does not set errno=EAGAIN on interrupt, however
it does set errno=EINTR. Have libvirt retry on the appropriate errno.
Under heavy load, a program of mine kept getting libvirt errors 'poll on
socket failed: Interrupted system call'. The signals were SIGCHLD from
processes forked by threads unrelated to those using libvirt.
This patch adds the capability in libvirt to check if
-netdev bridge option is supported or not.
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>
Fix addresses two issues:
1. Fix generator code to allow deep copy operation for objects with
Dynamic_Cast capabilities.
2. Add missing deep copy routine to Long datatype.
Signed-off-by: Ata E Husain Bohra <ata.husain@hotmail.com>
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Fix the virStorageBackendFileSystemVolDelete method to not use
unlink() unconditionally. It must use rmdir() for volumes which
are directories. It should also raise an error if given a volume
which has the network/block type.
QEMU (and librbd) flush the cache on the source before the
destination starts, and the destination does not read any
changeable data before that, so live migration with rbd caching
is safe.
This makes 'virsh migrate' work with rbd and caching without the
--unsafe flag.
Reported-by: Vladimir Bashkirtsev <vladimir@bashkirtsev.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Hello,
This is a patch to fix vm's outbound traffic control problem.
Currently, vm's outbound traffic control by libvirt doesn't go well.
This problem was previously discussed at libvir-list ML, however
it seems that there isn't still any answer to the problem.
http://www.redhat.com/archives/libvir-list/2011-August/msg00333.html
I measured Guest(with virtio-net) to Host TCP throughput with the
command "netperf -H".
Here are the outbound QoS parameters and the results.
outbound average rate[kilobytes/s] : Guest to Host throughput[Mbit/s]
======================================================================
1024 (8Mbit/s) : 4.56
2048 (16Mbit/s) : 3.29
4096 (32Mbit/s) : 3.35
8192 (64Mbit/s) : 3.95
16384 (128Mbit/s) : 4.08
32768 (256Mbit/s) : 3.94
65536 (512Mbit/s) : 3.23
The outbound traffic goes down unreasonably and is even not controled.
The cause of this problem is too large mtu value in "tc filter" command run by
libvirt. The command uses burst value to set mtu and the burst is equal to
average rate value if it's not set. This value is too large. For example
if the average rate is set to 1024 kilobytes/s, the mtu value is set to 1024
kilobytes. That's too large compared to the size of network packets.
Here libvirt applies tc ingress filter to Host's vnet(tun) device.
Tc ingress filter is implemented with TBF(Token Buckets Filter) algorithm. TBF
uses mtu value to calculate the amount of token consumed by each packet. With too
large mtu value, the token consumption rate is set too large. This leads to
token starvation and deterioration of TCP throughput.
Then, should we use the default mtu value 2 kilobytes?
The anser is No, because Guest with virtio-net device uses 65536 bytes
as mtu to transmit packets to Host, and the tc filter with the default mtu
value 2k drops packets whose size is larger than 2k. So, the most packets
is droped and again leads to deterioration of TCP throughput.
The appropriate mtu value is 65536 bytes which is equal to the maximum value
of network interface device defined in <linux/netdevice.h>. The value is
not so large that it causes token starvation and not so small that it
drops most packets.
Therefore this patch set the mtu value to 64kb(== 65535 bytes).
Again, here are the outbound QoS parameters and the TCP throughput with
the libvirt patched.
outbound average rate[kilobytes/s] : Guest to Host throughput[Mbit/s]
======================================================================
1024 (8Mbit/s) : 8.22
2048 (16Mbit/s) : 16.42
4096 (32Mbit/s) : 32.93
8192 (64Mbit/s) : 66.85
16384 (128Mbit/s) : 133.88
32768 (256Mbit/s) : 271.01
65536 (512Mbit/s) : 547.32
The outbound traffic conforms to the given limit.
Thank you,
Signed-off-by: Eiichi Tsukata <eiichi.tsukata.xh@hitachi.com>
Latest patchset enabling libvirt on s390(x) was developed by
Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Thang Pham <thang.pham@us.ibm.com>
Add them to the AUTHORS file.
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.
It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0
The first parameter is "tty". It sould be "parport".
If I launch qemu with -chardev parport,... it works as expected.
I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:
https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, monitoring QEMU virtual machines with standard Unix
sysadmin tools is harder than it has to be. The QEMU command line is
often miles long and mostly redundant, it's hard to tell which process
is which.
This patch reorders the QEMU -name argument to be the first, so it's
immediately visible in "ps x", htop and "atop -c" output.
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
Add function virJSONValueObjectKeysNumber, virJSONValueObjectGetKey
and virJSONValueObjectGetValue, which allow you to iterate over all
fields of json object: you can get number of fields and then get
name and value, stored in field with that name by index.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
The current storage pools for NFS and iSCSI only require one host to
connect to. Future storage pools like RBD and Sheepdog will require
multiple hosts.
This patch allows multiple source hosts and rewrites the current
storage drivers.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
If console[0] is an alias for serial[0], do not enforce the former to
have a PTY source type. This breaks serial consoles on stdio and makes
no sense.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
In the current V3 migration protocol, Libvirt does not
check the result of the function
qemuMigrationVPAssociatePortProfiles
This means that it is possible for a migration to complete
successfully even when the VM loses network connectivity on
the destination host.
With this change libvirt aborts the migration
(during the "finish" step) when the above function fails, that
is to say when at least one of the port profile associations fails.
Signed-off by: Christian Benvenuti <benve@cisco.com>
* Don't advertise information on the network without consent of
the user, either through manual configuration, or a user
interface that drives this option.
* Since libvirtd must be configured for network access anyway
(for all but ssh), this setting was not useful "out of the box",
so changing this default setting does not remove "out of the box"
functionality.
[forwarding this here from RH bug #796732]
When creating a network (virsh net-create) with an erroneous XML
containing an empty <name> element, the error message is misleading:
error: Failed to create network from foo.xml
error: missing domain name information
It took me a bit of time to figure out that it was the *network* name
that was missing (I generate this xml and didn't look at it, first).
I realized that the same message is used for missing name when creating
a domain, network, or device node.
* src/util/virfile.h: the virFileWrapperFdFlags being defined as
a globa variable instead of a type ended up generating a duplicate
symbol error.
* AUTHORS: added Lincoln Myers
This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
or if libvirt should auto-generate the interfaceid use
following syntax:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
It is also possible to pass an optional profileid. To do that
use following syntax:
<interface type='bridge'>
<source bridge='ovsbr'/>
<mac address='00:55:1a:65:a2:8d'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
profileid='test-profile'/>
</virtualport>
</interface>
To create Open vSwitch bridge install Open vSwitch and
run the following command:
ovs-vsctl add-br ovsbr
Move myself from 'Previous maintainers' section to 'the primary maintainers and
people with commit access rights' section, because I have a commit rights now.
Signed-off-by: Alex Jia <ajia@redhat.com>
Added a new field "vm-pid" to the VIRT_CONTROL audit record. This information
is useful to correlated another audit events to the events generated by
libvirt.
Applications can now insert custom nodes and hierarchies into domain
configuration XML. Although currently not enforced, applications are
required to use their own namespaces on every custom node they insert,
with only one top-level element per namespace.
POLLIN and POLLHUP are not mutually exclusive. Currently the following
seems possible: the child writes 3K to its stdout or stderr pipe, and
immediately closes it. We get POLLIN|POLLHUP (I'm not sure that's possible
on Linux, but SUSv4 seems to allow it). We read 1K and throw away the
rest.
When poll() returns and we're about to check the /revents/ member in a
given array element, let's map all the revents bits to two (independent)
ideas: "let's attempt to read()", and "let's attempt to write()". This
should cover all errors, EOFs, and normal conditions; the read()/write()
call should report any pending error.
Under this approach, both POLLHUP and POLLERR are mapped to "needs read()"
if we're otherwise prepared for POLLIN. POLLERR also maps to "needs
write()" if we're otherwise prepared for POLLOUT. The rest of the mappings
(POLLPRI etc.) would be easy, but probably useless for pipes.
Additionally, SUSv4 doesn't appear to forbid POLLIN|POLLERR (or
POLLOUT|POLLERR) set simultaneously. One could argue that the read() or
write() call would return without blocking in these cases (with an error),
so POLLIN / POLLOUT would be justified beside POLLERR.
The code now penalizes POLLIN|POLLERR differently from plain POLLERR. The
former (ie. read() returning -1) is terminal and we jump to cleanup, while
plain POLLERR masks only the affected file descriptor for the future.
Let's unify those.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Earlier, when the number of vcpus was greater than the topology allowed,
libvirt didn't raise an error and continued, resulting in running qemu
with parameters making no sense. Even though qemu did not report any
error itself, the number of vcpus was set to maximum allowed by the
topology.
QEMU does not support security_model for anything but 'path' fs driver type.
Currently in libvirt, when security_model ( accessmode attribute) is not
specified it auto-generates it irrespective of the fs driver type, which
can result in a qemu error for drivers other than path. This patch ensures
that the qemu cmdline is correctly generated by taking into account the
fs driver type.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
