After previous cleanups, the virDomainNetDefParseXML() function
uses a mixture of virXMLProp*() and the old virXMLPropString() +
virXXXTypeFromString() patterns. Rework it so that virXMLProp*()
is used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, the virDomainFSDefParseXML() function
uses a mixture of virXMLProp*() and the old virXMLPropString() +
virXXXTypeFromString() patterns. Rework it so that virXMLProp*()
is used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, the virDomainDefParseBootXML() function
uses a mixture of virXMLProp*() and the old virXMLPropString() +
virXXXTypeFromString() patterns. Rework it so that virXMLProp*()
is used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, the virCPUDefParseXML() function uses a
mixture of virXMLProp*() and the old virXMLPropString() +
virXXXTypeFromString() patterns. Rework it so that virXMLProp*()
is used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are couple of places where virTristateBoolTypeFromString()
is called. Well, the same result can be achieved by
virXMLPropTristateBool() and on fewer lines.
Note there are couple of places left untouched because those
don't care about error reporting and thus are shorter they way
they are now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are couple of places (all of them in XML parsing) where
virTristateSwitchTypeFromString() is called. Well, the same
result can be achieved by virXMLPropTristateSwitch() and on fewer
lines.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both @accel2d and @accel3d are parsed as virTristateBool, but in
a few places (qemuDeviceVideoGetModel() and
qemuValidateDomainDeviceDefVideo()) they are compared to
virTristateSwitch enum either directly or via a variable of that
type. Clear this confusion by using the correct enum.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
During validation of a virDomainFSDef QEMU capabilities are check
for multidevs support if the FS definition has it enabled.
However, the fs->multidevs is really type of virDomainFSMultidevs
but is compared against virDomainFSModel enum. Fortunately, both
values are the same so no user visible harm done here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's a typo in error message that's printed when parsing of
<plug type=''/> fails: "prt" is reported instead of "port".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In case virXMLPropUInt() or virXMLPropULongLong() meets an
attribute with a negative integer the following error message is
printed:
Invalid value ...: Expected integer value
This message is not as good as it could be. Let users know it's a
non-negative integer we are expecting.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Hint users that they can use 'virt-admin' also for the new monolithic
daemons.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2038045
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Modular daemons are now the default in many new installations, thus we
need to include steps how to determine that modular daemons are used and
modular-daemon specific locations for the config files and admin URIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since we are at a transition period where some users may be running
monolithic libvirtd and others already the modular topology we need a
section that allows users to figure out which is in use.
This will be particularly important in the document about enabling
logging, as the active log file depends on which daemon is in use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The socket permissions are controlled by 'unix_sock_admin_perms', but
regardless the code requires that 'geteuid() != clientuid' to allow
clients thus it doesn't make sense to make users aware of it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's the only GIF file we have in our repository.
We could convert it to PNG, but that would result in a
significantly bigger file (~5.5 KiB vs ~1.5 KiB).
Since the image doesn't really add much to the documentation,
drop it instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Update existing ppc64 6.2 caps to match what was released in QEMU 6.2.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This reverts commit 938382b60a.
Turns out, the commit did more harm than good. It changed
semantics on some public APIs. For instance, while
qemuDomainGetInfo() previously did not returned an error it does
now. While the calls to virProcessGetStatInfo() is guarded with
virDomainObjIsActive() it doesn't necessarily mean that QEMU's
PID is still alive. QEMU might be gone but we just haven't
realized it (e.g. because the eof handler thread is waiting for a
job).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2041610
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Changes in all 'ppc64-latest.ags' files were needed due to the
JSONification of command line devices.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently translated at 22.8% (2392 of 10455 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
If 'checkPool' is not implemented, the pool will be made inactive when
restarting libvirtd and subsequently re-loading the state from the pool
state XML.
Base the 'checkPool' implementation on logic similar to 'startPool'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1910856
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The direct SCSI pool doesn't expose the volumes in the host attempting
to match it using 'virStoragePoolObjSourceMatchTypeDEVICE' which in turn
uses 'virStoragePoolSourceFindDuplicateDevices' doesn't make sense.
Remove it from the source matching completely as we can open multiple
connections to the target.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use early returns to decrease the indentation level and make it more
obvious that the 'cleanup' path is a noop in those cases.
'virStoragePoolObjSetStarting' was called only when the code wanted to
start the pool, so if that was skipped, cleanup is noop as it's
conditional on the return value of 'virStoragePoolObjIsStarting'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the inner loop to automatically free temporary variables and
remove unreachable error paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When invoking 'virsh guestinfo $VM' without explicitly specifying a
group of information to return, virsh always reports success even when
the guest agent doesn't report any information in the current state.
This is desired in situations when you are okay with stats being missing
and avoids spurious errors being reported.
Clarify that this is really desired in the man page.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2041665
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
It's a tool name so use backticks to format it in monospace.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Move out the settings required to pre libvirt-4.4.0 deployments into a
separate section so that the main point is not cluttered by now mostly
irrelevant settings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Enabling the logs is the focus of this article. Decouple it from the
first section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the heading hierarchy as generated by pandoc which we use in most
of the converted XML format docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
'daemon-driver-storage' is just a meta-package, the actual daemon is in
the 'daemon-driver-storage-core' package, so without installing the meta
package the storage daemon is not being enabled.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2025644
Fixes: 50eae3f885, b8ef625544
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The existence of the unix socket path is used by the remote driver to
determine whether modular daemons are in use, so if the socket file
stays behind and the user decided to switch from modular to monolithic
daemon which was socket activated, the remote driver will insist on
picking '/var/run/libvirt/virtqemud-sock', even when it's no longer in
use:
# systemctl start libvirtd.service
# virsh list
Id Name State
--------------------
# systemctl stop libvirtd.service
Warning: Stopping libvirtd.service, but it can still be activated by:
libvirtd.socket
libvirtd-ro.socket
libvirtd-admin.socket
# systemctl start virtqemud.socket
# virsh list
Id Name State
--------------------
# systemctl stop virtqemud.socket
# systemctl start libvirtd.service
# virsh list
error: failed to connect to the hypervisor
error: Failed to connect socket to '/var/run/libvirt/virtqemud-sock': Connection refused
# virsh -c 'qemu:///system?socket=/var/run/libvirt/libvirt-sock' list
Id Name State
--------------------
Fix this by instructing systemd to delete the socket file when
deactivating the unit file for the socket.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Only QXL and virtio-vga actually propagate the 'heads' attribute as
'max_outputs' to the commandline of qemu. Reject the setting when
non-default value is used for any other video type.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2036300
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Subsequent patch will use the same condition so move the primary device
check into a nested condition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since there's no capability to check now, we can simply move the
formatting of 'max_outputs' earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both are supported by qemu-2.11 and later, so we don't have to check for
them explicitly.
Note that QXL is supported only on x86_64, thus on other arches only the
capability for 'virtio-gpu' is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both the QXL video device and 'virtio' video device support
'max_outputs' in all qemu versions libvirt supports. This means we no
longer have to check the QEMU_CAPS_QXL_MAX_OUTPUTS and
QEMU_CAPS_VIRTIO_GPU_MAX_OUTPUTS capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Value of '0' is treated equivalently to when it's not provided by the
user. Reject an explicit '0' provided by the user as it would get
ignored.
In this rare case we can make the XML parser more strict, as libvirt
would never format the '<acpi/>' element if the index is '0' thus there
are no libvirt-generated XMLs we'd not load back, as of such this is
identical to rejecting it in the validation phase.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2037146
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They way our VIR_ENUM_IMPL() and virXXXTypeFromString() work is
that for any string that's not recognized a negative one is
returned. And, since VIR_XXX_LAST is passed to VIR_ENUM_IMPL() we
can be sure that all enum members are covered. Therefore, there
is no way that virXXXTypeFromString() can return a value that's
bigger or equal to VIR_XXX_LAST.
I've noticed two places where such comparison was made, both in
cmdNetworkUpdate(). Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We're currently passing '0' which leaves the syslog facility
unset. Since we're passing an explicit facility for syslog
when using journald, it makes sense to be explicit when
using syslog directly too.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We set SYSLOG_PRIORITY when sending to journald to avoid our
messages getting tagged with the default facility which is
used for the kernel.
Unfortunately:
commit fd00f0e6c7
Author: Guido Günther <agx@sigxcpu.org>
Date: Mon Sep 21 20:06:55 2015 +0200
Use daemon log facility for journald
used the LOG_nnn constants from the syslog header without realizing
that these values have a bit-shift applied. While Linux defines a
LOG_FAC() macros to undo the bit-shift this doesn't appear to be
standardized. So the safe thing is to just use the raw value since
these values are fixed by RFC 5424.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was not mentioned before.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This partially reverts commit 9ccbed6afb.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
