For some disk types (SD), we want to emit the syntax
we used for disks before -device was available even
if QEMU supports -device.
Use the qemuDiskBusNeedsDeviceArg helper to figure out
whether to use the old or new syntax.
Name the validation function distinctively since it's called in the
parser. Later patches will add function that will validate disk
definitions that are invalid but need to be parsed to avoid losing
domains.
Seems recent versions of Coverity have (mostly) resolved the issue using
ternary operations in VIR_FREE (and now VIR_DISPOSE*) macros. So let's
just remove it and if necessary handle one off issues as the arise.
Rather than return 0/-1 and/or a pointer to some memory, adjust the
helper to just return the allocated structure or NULL on failure.
Adjust the callers in order to handle that
Signed-off-by: John Ferlan <jferlan@redhat.com>
If we get to the error: label and clear out the *virtual_functions[]
pointers and then return w/ error to the caller - the caller has it's
own cleanup of the same array in the out: label which is keyed off the
value of num_virt_fns, which wasn't reset to 0 in the called function
leading to a possible problem.
Just clear the value (found by Coverity)
Signed-off-by: John Ferlan <jferlan@redhat.com>
While introducing virtestmock.la, I've forgotten to add '\' at
the end of one line leaving our Makefile.am mangled. Fortunately,
the only thing that comes after is '$(NULL)' so nothing is
terribly broken.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the recently added job functions and unlock the virDomainObj while
performing the respective modify operation.
This commit affects lxcDomain{DestroyFlags, Reboot, SetBlkioParameters,
SetMemoryParameters, SetMetadata, SetSchedulerParameterFlags, ShutdownFlags}
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
These operations aren't necessarily time consuming, but need to
wait in the queue of modify jobs.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
These operations aren't necessarily time consuming, but need to
wait in the queue of modify jobs.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
Large balloon operation can be time consuming. Use the recently
added job functions and unlock the virDomainObj while ballooning.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
Creating a large domain could potentially be time consuming. Use the
recently added job functions and unlock the virDomainObj while
the create operation is in progress.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
Follows the pattern used in the libxl driver for managing multiple,
simultaneous jobs within the driver.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
If the stats for a block device can't be acquired from qemu we've
fallen back to loading them from the file on the disk in libvirt.
If qemu is not cooperating due to being stuck on an inaccessible NFS
share we would then attempt to read the files and get stuck too with
the VM object locked. All other APIs would eventually get stuck waiting
on the VM lock.
Avoid this problem by skipping the block stats if the VM is online but
the monitor did not provide any stats.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1337073
Some Intel processor families (e.g. the Intel Xeon processor E5 v3
family) introduced some RDT (Resource Director Technology) features
to monitor or control shared resource. Among these features, MBM
(Memory Bandwidth Monitoring), which is build on the CMT (Cache
Monitoring Technology) infrastructure, provides OS/VMM a way to
monitor bandwidth from one level of cache to another.
With current perf framework, this patch adds support to perf event
for MBM.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
vz puts uuids into curly braces. Simply introduce new contstant to reflect this
and get rid of magic +2 in code.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Peer to peer migration is implemented just as in managed case. Basically
it is copy paste from managed case but with all the branches that are not
applied to vz removed.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The newest version of migration protocol - version 3 with parameters is implemented.
Supported flags is VIR_MIGRATE_PAUSED only. Supported parameters are
VIR_MIGRATE_PARAM_URI and VIR_MIGRATE_PARAM_DEST_NAME. VIR_MIGRATE_PARAM_DEST_XML
is in VZ_MIGRATION_PARAMETERS for technical onyl reasons.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This session uuid acts as authN token for different multihost vz operations one
of which is migration. Unfortunately we can't get it from server at any time
thus we need to save it at login.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Finally wire-up virAdmServer{Get,Set}ClientLimits APIs into virt-admin client.
Update the virt-admin's man page accordingly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Opposite operation to virAdmServerGetClientLimits. Understandably though,
setting values for current number of clients connected or still waiting
for authentication does not make sense, since changes to these values are event
dependent, i.e. a client connects - counter is increased. Thus only the limits
to maximum clients connected and waiting for authentication can be set. Should
a request for other controls to be set arrive (provided such a setting will
be first introduced to the config), the set of configuration controls can be
later expanded (thanks to typed params). This patch also introduces a
constraint that the maximum number of clients waiting for authentication has to
be less than the overall maximum number of clients connected and any attempt to
violate this constraint will be denied.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Enable retrieval of the number of maximum clients connected to all sockets
combined, as well as the number of maximum clients waiting for authentication,
in order to be successfully connected. These are the attributes configurable
through libvirtd.conf, however, it could be handy to not only know values for
these limits, but also the values for the current number of clients
connected and number of clients currently waiting for authentication which are
changing dynamically. This API does both, retrieves the limits as well as the
current dynamic values.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In order for typed params validation to pass on daemon side, we should
encourage users to use our exported constants with typed params to diminish
to avoid any potential problems related to argument validity.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add some trivial getters for client related attributes to virnetserver before
any admin method can be introduced.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU needs access to the /dev/dri/render* device for
virgl to work.
Allow access to all /dev/dri/* devices for domains with
<video>
<model type='virtio' heads='1' primary='yes'>
<acceleration accel3d='yes'/>
</model>
</video>
https://bugzilla.redhat.com/show_bug.cgi?id=1337290
All qemu versions we support have QEMU_CAPS_DEVICE, so checking
for it is redundant. Remove the usage.
The code diff isn't clear, but all that code is just inindented
with no other change.
Test cases that hit qemuDomainAssignAddresses but don't have
infrastructure for specifying qemuCaps values see lots of
churn, since now PCI addresses are in the XML output.
Upcoming patches are going to make the disk portion of these
test cases fail. In order to make it work, we would need to
extend the qemuargv2xml test infrastructure to handle qemuCaps.
This is worthwhile to do at some point but isn't critical.
Instead just drop the offending portion, which isn't even the
target of the test cases anyways
hotplug APIs with the AFFECT_CONFIG flag are essentially replicating
'insert <device> into XML document, and redefine XML'. Thinking of
it this way, it's natural that we call virDomainDefPostParse after
manually editing the XML here.
Not only does doing so allow us to drop a bunch of open coded calls
to qemuDomainAssignAddresses, but it also means we are going through
the standard channels for XML validation and potentially catching
errors in user submitted XML.
This wires up qemuDomainAssignAddresses into the new
virDomainDefAssignAddressesCallback, so it's always triggered
via virDomainDefPostParse. We are essentially doing this already
with open coded calls sprinkled about.
qemu argv parse output changes slightly since previously it wasn't
hitting qemuDomainAssignAddresses.
This solution does not keep snapshots cache because vz sdk lacks good support
for snapshot related events.
Libvirt and vz sdk has different approach to snapshot ids. vz sdk always
auto generate them while libvirt has ability to specify id by user.
Thus I have no other choice rather than simply ignore ids set by user
or generated by libvirt.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
